You are on page 1of 13

ARE CHRIST MAS LIGHT S IN SERIES OR PARALLEL?

W HY DONT YOUR

Christmas lights work? Sadly, in the event of a string of

lights going out on your tree, replacing the strand is usually the best option.
Its pretty difficult to find that one bulb thats causing the problem. However,
this is a great time to look at the difference between series and parallel
circuits.

A SIMPLE CIRCUIT
Just about the simplest circuit you can create uses just one battery and one
light bulb. In one fun activity, you can give a person one wire, one battery and
one light bulb. Ask the person to make the bulb shine. Its possible to get it to
work, but it can still cause some trouble for people.
In order to get the bulb to glow, you need a complete circuit. There has to be a
path for the current to come out of one end of the battery, go through the
filament in the bulb and then return to the battery. Heres how that could
work.

Click to Open Overlay GalleryA


simple circuit with a battery and bulb.

Rhett Allain

When current passes through the filament, it makes the filament get super
hot. Super hot things glow. Thats all the bulb does. But why the glass on the
outside? That is there to keep air away from the super hot filament. With air in
contact with the filament, it would burn out.
If you take away any one of the parts for the complete circuit, there would be
no current and no glowing bulb.

LIGHT BULBS IN SERIES


Now you want to connect two light bulbs to battery. Here is one way you could
do that.

Click to Open Overlay


GalleryA circuit with two lightbulbs connected in series.

Rhett Allain

In this case, there is just one path for the current to follow. The current that
goes through the first bulb also goest through the second bulb. If you remove
any part of this circuit (like take out a bulb), everything goes out. If you
wanted, you can make a similar circuit with 10 or 20 bulbs. Just connect them
all in a line so that the same current goes through each one. This is a series
connection.

LIGHT BULBS IN PARALLEL


There is another way to connect two light bulbs. Check it out.

Click to Open Overlay


GalleryA circuit with two lightbulbs in parallel.

Rhett Allain

The difference in this circuit is that each lightbulb has its own path to the
battery. If you break one of these bulbs, it doesnt really do anything to the
other bulb.
Here is a quick demo showing the difference between bulbs in series and bulbs
in parallel.
Oh, and just like the lightbulbs in series you can do this with many, many
bulbs.

CHRISTMAS LIGHTS
Now we can get to the fun stuff. What about the lights you put on your
Christmas tree? Are those lightbulbs in series or parallel? What do you think?
Here are two hints.

Hint number 1: if you pull out one of the lightbulbs from a strand, the rest of
the lights go out. Ok, this isnt always true. Many lights are actually two sets of
strands. If you pull out a lightbulb, half the strand goes out.

Click to Open
Overlay Gallery

Rhett Allain

Here you can see that this strand has one bulb removed and non of the other
lights are on (even though the power is on).

Hint number 2: In some cases, one of the lightbulbs in a strand may burn
out. When a lightbulb burns out, typically it will be due to a broken (or
melted filament). In this case, the strand would look like this.

Click to Open Overlay Gallery


Rhett Allain

Notice the one bulb is indeed out but the other bulbs are on. But is the
filament actually broken? Yes, if you look closely, you can see something like
this.

Click to Open Overlay GalleryA broken


filament in a Christmas light.

Rhett Allain

Ok, now whats the answer? Are the bulbs in series or parallel? Based on hint
1, it seems the lights are in series. Based on hint 2, it seems they are in
parallel. The answer is that the lights are in series. Yup.

But how can this be? How can you have one light with a broken filament and
still have the other lights on? In the physics world, we call this the magic of
Christmas. Ok, not really. The answer is that the lights are connected in series
but the bulbs have a trick.
Lets take a closer look at one of the light bulbs in the strand.

Click
to Open Overlay GalleryA shunt wire (bypass wire) in a Christmas light.

Rhett Allain

This is a view of a broken bulb. At the end of the metal posts you can see the
broken filament so this is a burned out bulb (plus I broke the glass so you
could see better). But what about that metal wire wrapped around the posts
(indicated with the red arrow)? What is that for? If it was just a normal wire,
this would short out the bulb. It would mean that most of the current going
through this bulb would run through this wire and not through the filament.
With very little current, the filament would not glow.

So, in order for this bulb to function properly in a strand (with a good
filament), there shouldnt be a current going through this bypass wire. Ok,
now let me make some guesses as to how this magic Christmas light works.
Yes, I could ues the internet to find out more about this bulb, but I really like
guessing.

Like I said, in a functioning bulb this wire does not conduct electrical current.
There must be some type of insulator between the bypass wire and the filament
post.

When the filament burns out, all the current going through all the bulbs in series
stops.

Without current going through the bulbs, there is a high potential difference
between the bypass wire and one of the filament posts (I will show why below).
This high voltage (120 volts) across a very short distance produces a very high
electric field.

If the electric field is high enough, it could cause and electric breakdown in the
material and turn it from an insulator into a conductor.

Boom. The rest of the lights work now (but it probably doesnt make a boom
sound).

But how does a broken filament make a high voltage right at the bulb that is
broken? Lets pretend like we have a different circuit. In this one, I have 5
lightbulbs in series connected to a battery. Oh, and all the lightbulbs work.

Click to
Open Overlay GalleryResistors in series

Rhett Allain

Suppose each lightbulb has a resistance R (it doesnt matter than lightbulbs
are non-ohmic). If I have a 10 volt battery connected to them, then the total
change in electric potential around the loop must be zero volts. Also, since the
bulbs are in series, they have to have the same electric current (I). This means
that I can write:

So each bulb has a 2 volt electric potential across it. But now lets say one of
those bulbs break. With an open circuit, there is no longer a current. Here is
the new diagram.

Click to
Open Overlay GalleryResistors in series with a break in the circuit.

Rhett Allain

Even though there is a break, the change in electric potential around this loop
still has to be zero volts. But since there is no electric current, the change in
potential across each resistor is zero. This means that the full 10 volts must be
across the gap. This 10 volt gap potential creates a large electric field that
breaks down the insulator. Thats the magic of the Christmas lights.

MY LIGHTS STILL DONT


WORK.
These lightbulbs have this awesome bypass wire inside the bulbs. However, if
the light bulb is not even plugged in even the bypass wire wont work. So, if
you have a strand that doesnt work here are some things you can try.

1. Is it plugged in? Yes, you should check this. A strand of lights that isnt
plugged in wont work. If you have lights plugged in outside and they get wet,
they will likely trip your Ground Fault Interrupter (GFI). You have these on
the outlets in your bathroom (with the test and reset button). When the circuit
gets wet it can trip this.

2. Check the fuse. Ill assume that you checked your household circuit
breaker. If that was tripped, you could probably tell because of the other
things that werent working. But there are also fuses in the little plug on the
end of the strand. There is a sliding door and it looks like this.

Click to Open Overlay Gallery


Rhett Allain Fuses in a strand of Christmas lights.

If you connect too many strands of lights together then the current will be too
large. The fuse will go out to prevent these things from getting too hot.
However, sometimes these little fuses just get loose after storing the lights in
the off season. It doesnt hurt to check them.

3. Look for a loose bulb. If a strand doesnt work and you checked the other
stuff, theres a good chance the problem is a loose bulb. It can be quite a
challenge to locate a loose bulb. Normally, I just push on each bulb to see if I
can get the strand of lights to come on. There is also a special tool you can use.
Mine looks like this:

Click to Open
Overlay Gallery
Im not completely certain, but I think this thing detects small electric
currents. If you have a loose bulb, there will be a slight alternating current
going to and from the outlet to the break. On the other side of the break there
wont be the same current. You can detect a current by detecting the magnetic
fields that go along with the current. But now Im not so sure this is the way
these detectors work. Ill have to think about this is a little bit.

4. Check for squirrels. Yes. Look at these lights on a tree in my front yard.

You might also like