Project Name: - Design and Development of Wind Power
Water lifting Pump
Mechanism A Practical Approach for
Rural Development
Clean water is difficult to acquire in many third world
countries. The aim of this project was to design and construct a wind pump that is able to provide water to a rural third world village. The overall design goals of this project focused on affordability and simplicity of design rather than efficiency. A windmill is a machine that converts the energy of wind into rotational energy by means of vanes called sails. Originally, windmills were developed for milling grain for food production. In the course of history, the windmill machinery was adapted to many other industrial uses. An important non-milling use is to pump water, either for land drainage or to extract groundwater. A wind pump is a windmill used for pumping water, either as a source of fresh water from wells, or for draining low-lying areas of land. Wind pumps are used when electricity is not available. Windmills were used to pump water since at least the 9th century in what is now Afghanistan, Iran and Pakistan .The use of windmills became widespread across the Muslim world and later spread to China and India as well. Windmills were later used extensively in Europe, particularly in the Netherlands and the East Anglia area of Great Britain, from the late middle Ages onwards, to drain land for agricultural or building purposes. Early immigrants to the New World brought with them the technology of windmills from Europe. On US farms, particularly on the Great Plains, wind pumps were used to pump water from farm wells for cattle. In early California and some other states the windmill was part of a selfcontained domestic water system including a hand-dug well and a redwood water tower supporting a redwood tank and enclosed by redwood siding (tank house). The self-regulating farm wind pump was invented by Daniel Halladay in 1854. Eventually steel blades and steel towers replaced wooden construction.
First Author Name: Pawar Ajinkya Ramakant
College Name: Government College of Engineering And Research Awsari (kh)
Research Paper: - Design and Development of Wind Power
Water lifting Pump
Mechanism A Practical Approach for
Rural Development
Clean water is difficult to acquire in many third world
countries. The aim of this project was to design and construct a wind pump that is able to provide water to a rural third world village. The overall design goals of this project focused on affordability and simplicity of design rather than efficiency. A windmill is a machine that converts the energy of wind into rotational energy by means of vanes called sails. Originally, windmills were developed for milling grain for food production. In the course of history, the windmill machinery was adapted to many other industrial uses. An important non-milling use is to pump water, either for land drainage or to extract groundwater. A wind pump is a windmill used for pumping water, either as a source of fresh water from wells, or for draining low-lying areas of land. Wind pumps are used when electricity is not available. Windmills were used to pump water since at least the 9th century in what is now Afghanistan, Iran and Pakistan .The use of windmills became widespread across the Muslim world and later spread to China and India as well. Windmills were later used extensively in Europe, particularly in the Netherlands and the East Anglia area of Great Britain, from the late middle Ages onwards, to drain land for agricultural or building purposes. Early immigrants to the New World brought with them the technology of windmills from Europe. On US farms, particularly on the Great Plains, wind pumps were used to pump water from farm wells for cattle. In early California and some other states the windmill was part of a selfcontained domestic water system including a hand-dug well and a redwood water tower supporting a redwood tank and enclosed by redwood siding (tank house). The self-regulating farm wind pump
was invented by Daniel Halladay in 1854. Eventually steel blades
and steel towers replaced wooden construction.
First Author Name: Pawar Ajinkya Ramakant
College Name: Government College of Engineering And Research Awsari (kh) Class: SE/TE/BE/ME/PhD: -BE (Mech) Email ID: ajinkyapawar8009@gmail.com Contact No: 9763408009
Poster Presentation:-ENERGY AND NANOTECHNOLOGY
ADVANCE STRATAGY FOR THE
FUTURE
The key finding of this report Nanotechnologies are a growing
group of enabling technologies, dealing with engineering at the molecular level, which can make a substantial impact on all areas of energy, including conversion, storage and distribution. There is a substantial investment in research and development capacity in this area in Australia but more needs to be done to maintain and strengthen this effort and to ensure that the research outcomes are put to practical use for Australias sustainable energy future. Energy is essential to virtually every aspect of human activity and the increasing world population and the rapid economic growth of many developing countries, particularly China and India, will require an increasing world energy supply. Concerns over security of supply, sustainability of resources and increasing greenhouse gas emissions linked to climate change have led to a worldwide effort to develop improved use of existing fossil fuels, together with new approaches to energy production and usage from a range of non-fossil and renewable sources such as solar, wind , nuclear, geothermal, biomass and tidal. Projections of energy demand indicate that no single technological silver bullet will suffice and that an integrated approach is needed. In Australia the dominant energy source has been black and brown coal. Indigenous supplies are adequate for several centuries. The same is roughly true for natural gas, but oil supplies are in decline. Australian energy strategy will need to be technology-based around increased energy conservation and clean coal technology, combined with capture and storage of carbon dioxide, as well as substantial contributions from non-fossil and renewable energy sources.
First Author Name: Pawar Ajinkya Ramakant
College Name: Government College of Engineering And Research Awsari (kh)