Professional Documents
Culture Documents
www.ti.com/automation 2015
3
TI Designs
4 Amplifiers
5 Precision ADCs ( 10 MSPS)
5
Programmable gain
amplifiers
6
Digital isolators
6
Voltage reference
Analog output
9 Microcontrollers
10 Industrial interface transceiver
10 LVDS devices
10 Logic: LVC
TI Designs
Input power protection
LDO linear regulator
DC-DC regulator
Window comparator
13 Microprocessors
13 Industrial ethernet protocols
15 Industrial protocol support
15 Ethernet PHY
15 eFuses
16 DC-DC regulators
16 DDR termination regulators
16 Power Management ICs (PMICs)
16 Load switches
17 Clock generators
17 Clock fanout buffers
110V /
220V
CPU
Coms
Std Ethernet
Special
Function
Programmable Logic
Controller with local IO
(DIN-rail in cabinet)
Master
Slave
Slave
Bus
Coupler
In-/ Output
8
TI Designs
9 Drivers
Power
Digital output
In-/ Output
TI Designs
Digital serializer
Input
8
8
Digital input
Power
6 Overview
6
TI Designs
7
Precision DACs
7
Analog output driver
Input
Analog input
2 Overview
Power
Power
Table of contents
Special
Function
Remote IO
(DIN-rail)
Industrial Ethernet
In-/ Output
Power
Bus
Coupler
Power
Bus
Coupler
Input
Slave
Decentralized IO
(machine attached)
Texas Instruments
Analog inputs
TI Designs
Protection
Flow
Optical
MUX
V+
Pressure
VREF
PGA
Protection
Digital
Isolation
ADC
AMP
Name
5 V, 10 V
05 V, 010 V
Interface
Digital
Isolation
Level
Controller
Buffer
VREF
Key Features
Designed to comply with IEC61000-4 standards for ESD, EFT and Surge
TIDA-00119 is a complete, highly-integrated PLC analog input module front-end
Up to 8 channels user programmable inputs and configurable over-range
Digital
reference design that is designed and
tested to meetPGA
IEC61000-4 standards
for
industrial
Interface
MUX
Controller
ADC
capability of 20%
automation systems. The design can be configured for 4 differential inputs or 8 single- Isolation
Four voltage inputs: 3 Single ended & 1Differential with impedance > 1 M 10
Buffer
12-Bit, 8 channel, integrated analog ended inputs with 12-bit ADC resolution and a sample rate of up to 1 MSPS. These inputs
420 mA
V, 5 V, 2.5 V, 0-10 V, 0- 5 V, Up to 12 V with external reference
input module for programmable
can also Protection
be programmed to take current or voltage inputs with selectable ranges. The
Digital
010 mA
Four current inputs: 0-20 mA,Memory
4-20 mA (with input impedance of 250 )
logic controllers (PLC)
design also includes an isolated power supply providing all necessary
module
voltages,
HART
Isolation
Accuracy over entire input range
input surge and ESD protection and an isolated digital data interface that can be
Voltage: < 0.2% full scale at 25C
connected to any microcontroller, FPGA or ASIC via SPI interface. Full documentation, test
Current: < 0.35% full scale at 25C
results, design files and necessary firmware are available to help reduce time to market.
On-board isolated FlybuckTM power supply with inrush current protection
8-channel, 16-bit SAR ADC ADS8688 that supports from 300 ksps to 30 ksps
per channel
The TIDA-00164 reference design provides a complete solution for a single supply
Programmable channels: each channel can be configured as current or voltage
16-Bit, 8 channel, integrated
Per
Channel
Isolated
Analog
Input
Module
industrial control analog input module. The reference design is suitable for process
input with software configuration
analog input module for
control end equipment like programmable logic controllers (PLC), distributed control
Programmable current range (0-20mA) and voltage range (10 V)
programmable logic controllers
system (DCS), data acquisition systems (DAS) modules that must digitize standard
Single 24 V input power supply operation
5 V, 10 V
Digital
(PLC)
ADC
industrialProtection
current inputs and AMP
bipolar or unipolar input voltage ranges up
to 10 V.
Designed for IEC-61000 compliance (IEC-61000-4-4: EFT up to 2 kV @ 5 kHz
05 V, 010 V
Isolation
on signal ports; IEC-61000-4-2: ESD up to 4 kV contact & 8 kV air discharge;
IEC-61000-4-5: surge up to 1 KV line-earth (CM) on signal ports)
Interface
Controller
The TIDA-00170 is a reference design for industrial control analog mixed input output
420 mA
modules. The design implements four channel analog input & two channel analog output.
16-bit resolution, user programmable analog input output ranges
Digital
010 mA
The analog
input channels can
measure all standard industrial voltages
up to 10 V and
Programmable channels: each Memory
I/P channel can be configured as current or
Protection
AMP
ADC
Isolation
16-Bit analog mixed input and
current inputs up to 24 mA. The two simultaneous analog outputs can source voltage
voltage input and O/P channel can be configured as voltage or current output
From for
Sensors
output module
programmable
up to 10 V and current up to 24 mA. The reference design includes the necessary
with software configuration
logic controller (PLC) reference
on-board protection circuit & is tested for IEC61000-4 standard EFT, ESD and surge
Accuracyinput Ch better than 0.1% FSR at 25C, output Ch better than
design
requirements with IO Controller platform. The protection circuitry does not negatively
0.2% FSR at 25C
affect the design and test results showed typical unadjusted errors were less than 0.1%
On-board isolated Flybuck power supply with inrush current protection
of the full-scale range (FSR) for the analog input channel and less than 0.2% FSR for the
Designed to comply with IEC61000-4 standards for ESD, EFT, and surge
analog output channel.
LEGEND
Logic
Texas Instruments
Processor
Interface
RF/IF
Amplifier
Power
ADC/DAC
Clocks
Other
Two different sensor input channels: K-type thermocouple input with CJC
Compatible to 2-, 3- or 4-wire RTD probes
Ratiometric measurement for RTD
Overall measurement accuracy better than: For thermocouple: 1C, for RTD:
0.4C
Sensor wire open circuit or signal out-of-range detection
Comply to IEC-61000-4 requirements: IEC-61000-4-4: EFT up to 1 kV @ 5 kHz
on signal ports
IEC-61000-4-2: ESD up to 4 kV contact & 8 kV air discharge
IEC-61000-4-5: Surge up to 1 kV line-earth (CM) on signal ports
Analog inputs
Amplifiers
Amplifiers
Device
Description
Vn @
Operating
BW
GBW
Iq per
1 kHz
Temp.
@ Acl (Typ)
(typ)
Range
Channel
(MHz) (MHz) (Max) (mA) (nV/Hz)
(C)
Pin/
Package
Price *
(US$)
2.5
5.5
0.4
220
36
0.25
10
40 to 125
10/QFN
8/VSSOP
8/SOIC
1.10
THS4532
2.5
5.5
0.4
220
36
0.25
10
40 to 125
16/TSSOP
1.85
THS452x
1,2,4
2.5
5.5
490
145
1.14
4.6
40 to 85
8/VSSOP, 8/
SOIC
16/TSSOP,
38T/SSOP
1.21
THS4541
2.7
5.4
0.45
0.5
1500
620
10.1
2.2
40 to 125
10/QFN
16/QFN
2.65
OPAx835
1,2
2.5
5.5
0.5
2.25
160
56
0.25
9.3
40 to 125
6/SOT-23,
10/QFN
10/QFN,
10/VSSOP
8/SOIC
1.35
OPAx836
1,2
2.5
5.5
0.4
1.1
560
205
4.6
40 to 85
6/SOT-23,
10/QFN
10/QFN,
10/VSSOP
8/SOIC
1.50
THS403x
1,2
32
100
200
8.5
1.6
40 to 85, 0
to 70
8/MSOP
8/SOIC
3.70 |
100u
THS4130
30
4.5
52
150
12.3
1.3
40 to 85, 0
to 70
8/MSOP
8/VSSOP
8/SOIC
5.91 |
100u
THS4281
2.7
16.5
2.5
35
95
0.8
12.5
40 to 85
5/SOT-23
8/VSSOP
8/SOIC
1.23
36
0.025
0.03
0.8
0.475
8.8
40 to 105
8/SOIC,
8/VSSOP
1.05
4.5
36
0.05
0.15
27
45
4.5
1.1
40 to 125
4.5
36
0.12
0.35
20
11
5.1
40 to 125
36
0.15
28
22
5.2
40 to 125
1,2,4
36
0.075
0.1
2.3
3.8
40 to 85
1.8
5.5
0.15
1.5
10
20
1.75
8.5
40 to 125
2.2
5.5
0.2
25
50
4.5
40 to 125
1,2
2.7
5.5
0.005
0.02
1.6
0.35
1.4
40 to 125
1,2,4
4.5
36
0.025
0.15
20
10
1.2
5.5
40 to 125
5/SOT-23,
8/SOIC,
8/VSSO
1.35
2.16
2.75
40 to 125
5/SC70,
5/SOT-23,
8/SOIC,
8/VSSOP,
14/SOIC,
14/TSSOP
0.65
0.99
1.49
Precision amplifiers
OPA2188
OPA211
OPA140
OPA827
OPAx227
OPA320
OPA365
OPA335/
2335
OPAx192
OPAx172
1,2,4
4.5
36
0.3
10
10
1.8
8/SOIC,
8/SON,
8/VSSOP
8/SOIC,
5/SOT-23,
8/VSSOP
8/SOIC, 8/
VSSOP
DIP-8, SO-8,
DIP-14,
SO-14
5/SOT-23,
6/SOT-23
5/SOT-23,
8/SOIC
5/SOT-23,
8/SOIC,
8/VSSOP
3.45
1.55
3.75
1.40
2.07
4.53
0.80
0.65
1.12
1.79
Texas Instruments
Analog inputs
VREF
(V)
INL
(Max)
()
Power
Input
Operating
Voltage
Temperature
Consumption
(Typ) (mW) Architecture Range (V) Interface Range (C)
Pin/
Package
Price*
(US$)
28/HTSSOP
3.43/3.61/
3.80/4.00
Delta-Sigma
16/TSSOP, 20/
TSSOP, 28/
TSSOP
3.45/4.45/
4.95
40/4/38
Delta-Sigma
10 ppm
13
Delta-Sigma
20/TSSOP
5.60
Ext
15 ppm
42
Delta-Sigma
48/VQFN
16.50
10
Int/ext
3ppm
24
Delta-Sigma
28/TSSOP
9.10/12.65
100k
Ext
0.5 LSB
1.32
SAR
0 to 5.5
40 to 85
24/VQFN
2.75
12
1M
4/8
Int/ext
1.5 LSB
14.45
SAR
10
24/VQFN
2.85/3.25
12
1M
Int
1 LSB
0.234
SAR
0 to 3.6
8/VSSOP, 8/
X2QFN
2.10
12
500k
4/8
Int/ext
0.5 LSB
65
SAR
10.24
38/TSSOP
4.00/5.00
12/14/16
1M/600k
Int
1/2/2.5
LSB
42.5
SAR
0 to 5.5
16/TSSOP,
16/WQFN
3.50/
6.00/9.00
14
500k
4/8
Int/ext
0.75 LSB
65
SAR
10.24
38TSSOP
9.00/
12.00
14/16
250k
Ext
0.95/2 LSB
4.8/5.8
SAR
0 to 5.5
Serial SPI
40 to 85
10/VSSOP
2.75/5.00
16
500k
Ext
1.5 LSB
18
SAR
0 to 5.5
Serial SPI
40 to 85
10/VSSOP, 10/
VSON
6.00
Device
Description
LMP90097/098/
099/100
24
214
4/4/7/7
Int/ext
15 ppm
5.3
Delta-Sigma
ADS1246/7/8
Precision 24-bit ADCs with lownoise PGA for small signal sensors
24
2k
1/3/7
Int/ext
15 ppm
2.3
ADS1252/4/5
24
41k/
20k/30k
1/2/4
Ext
15 ppm
24
14.4k
Int/ext
24
125k
16
32
38k
12
40 to 85
ADS8319
ADS8684/
4A/8/8A
16
500k
4/8
Int/ext
2 LSB
65
SAR
10.24
38/TSSOP
10.00
11.00
14.00
15.00
ADS8694/8
18
500k
4/8
Int/ext
5 LSB
65
SAR
10.24
38/TSSOP
15.00/
20.00
ADS1259
ADS1258
ADS1262/3
ADS8201
ADS8634/8
ADS7042
ADS8664/8
ADS7253/
7853/8353
ADS8674/8
ADC141S626/
ADC161S262
Serial SPI
Part
Number
Description
PGA281
1/8,1/4, 1/2,
1, 2, 4, 8,
16, 32, 64,
128
0.15
20
0.0001
10
36
20
0.2
PGA280
1/8, 1/4,
1/2, 1, 2, 4,
8, 16, 32,
64, 128
0.15
20
0.0001
10
36
20
0.2
PGA204
Programmable gain
instrumentation amplifier
1, 10, 100,
1000
0.024
0.3
140
0.002
36
13
Texas Instruments
Iq
(Typ)
(mA)
Operating
Temperature
Range(C)
Pin/
Package
Approx.
Price
(US$)
15
40 to 125
16/TSSOP
2.55
15
40 to 125
24/TSSOP
2.90
5.2
40 to 85
16/SOIC
16/PDIP
8.35
Analog inputs
Isolation
Rating
(kVrms)
Peak
Isolation
Rating
(Vpk)
Working
Voltage
(Vpk)
Forward /
Reverse
Channels
Speed
(Max)
(Mbps)
VCC
(Min)
(V)
VCC
(Max)
(V)
Default
Output
Propagation
Delay (Typ)
(ns)
Operating
Temperature
Range (C)
Pin/Package
Price*
(US$)
2500
4000
560
2/0
3.3
High
40 to 105
8/SOIC
0.85
2500
4000
560
2/0
50
3.3
Low
20
40 to 85
8/SOIC
1.05
2500
4000
1414
3/1
25
2.7
Low
17
40 to 125
16/SOIC
1.40
2500
4000
560
3/1
50
2.7
Low
23
40 to 125
16/SOIC
1.90
Low-power dual-channel
isolators
Voltage reference
VO
(V)
Temp
Coeff (Typ)
(ppm/C)
Temp Coeff
(Max)
(ppm/C)
Initial
Accuracy
@ 25/C (%)
0.110 Hz
Noise (Max)
(Vpp)
IOUT/Iz
(Max)
(mA)
2.048
2.5
0.05
10
800
2.7
2.5
30
0.15
84
10, 20, 30
0.05
20
Part
Number
LM4132
Description
1.024, 1.25,
2.048, 2.5,
4.096
VIN
VIN
Iq (Typ) (Min) (Max)
(A)
(V)
(V)
Operating
Temperature
Range (C)
Pin/
Package
Price*
(US$)
18
40 to 125
8/SOIC,
8/VSSOP
1.35
2.7
5.5
40 to 125
3/SC-70,
3/SOT-23
0.85
60
2.2
5.5
40 to 125
5/SOT-23
0.78
4.096, 2.048
10
25
0.1
49.2
20
360
4.116
5.5
40 to 125
SOT23-5
0.99
0.05
49.2
20
360
4.116
5.5
40 to 125
SOT23-5
1.4
Analog outputs
Overview
Communication
Fieldbus IN
Interface
Controller
Digital
Isolation
AMP
To Field Acutators
I/V Driver
Protection
420 mA
DAC
AMP
Protection
Voltage Driver
05 V, 010 V, 5 V, 10 V
Digital
Isolation
AMP
Protection
Current Driver
420 mA
05 V, 010 V, 5 V, 10 V
DAC
AMP
Protection
Texas Instruments
I/V Driver
Analog outputs
Description
Key Features
The TIDA-00118 reference design provides a complete 4-channel, 16-bit analog output
module design for programmable logic controllers (PLCs). It is designed and fully tested
to meet IEC61000-4 EMC and surge requirements for industrial automation systems.
The small form-factor design implements four 16-bit digital-to-analog converters with
16-Bit Analog output module
integrated output drivers capable of driving several current and voltage output ranges.
reference design for programmable
Digital data and control lines are galvanically isolated from the PLC host using TIs highlogic controllers (PLC)
speed, 4242 V peak, digital isolator technology. The design also includes an over-current
protected, isolated power supply providing all necessary module voltages. With full
documentation, test results, design files and necessary firmware, the design makes it
easier to evaluate complete signal chain performance and reduces time to market.
Designed to comply with IEC61000-4 standards for ESD, EFT and surge
4-channel 16-bit DAC based configurable analog outputs
Voltage outputs: 10 V, 0 - 10 V, 5 V, 0 - 5 V
Current outputs: 0 - 20 mA, 4 - 20 mA, 0 - 24 mA
Voltage output accuracy: 0.2% FSR and current output accuracy: 0.2% FSR
Designed with output filtering, protection circuitry and integrated 15 kV ESD
protection
24 VDC powered with on-board isolated power supplies
Precision DACs
INL
Resolution No. of
(Max)
(Bits) Channels (LSB)
Output
Range Settling
Operating
(Max)
Time Output
Reference: Temperature
Pin/
Price*
(V or mA) (s)
Type Interface
Type
Range (C) Package (US$)
Device
Description
DAC7760/
8760
12/16
52
-11 V to 11 V,
0 to 24 mA
10
Buffered
voltage,
current
SPI
Ext, Int
40 to 125
24/HTSSOP,
40/VQFN
2.99/
3.99
DAC7750/
8750
12/16
26
0 to 24 mA
10
Current
SPI
Ext, Int
40 to 125
24/HTSSOP,
40/VQFN
2.49/
3.49
DAC7562/
8162/
8562
12/14/16
12
0 to 5 V
Buffered
voltage
SPI
Ext, Int
40 to 125
10/VSSOP,
10/WSON
2.50/
3.85/
4.20
DAC161S055
16
0 to 5.25 V
Buffered
voltage
SPI
Ext
40 to 105
16/WQFN
2.95
DAC7716/
8234/
8734
12/14/16
-16.5 to 33 V
15
Buffered
voltage
SPI
Ext
40 to 105
48/VQFN,
64/TQFP
8.20/
14.95/
20.00
DAC7718/
8218/
8718
12/14/16
-16.5 to 33 V
15
Buffered
voltage
SPI
Ext
40 to 105
48/VQFN,
64/TQFP
8.95/
13.45/
16.45
16
4 to 20 mA
Current
Single Wire/
SPI
Ext
40 to 105
16/WQFN
1.75
DAC161P997/
SPI 16-bit precision DAC for 420 mA loops
S997
Part Number
Description
XTR300
10
40
0.1
XTR117
7.5
40
0.02
Texas Instruments
Span Error
(Max) (%)
Offset Voltage ()
(Max) (V)
Pin/
Package
Price*
(US$)
17.5
0.12
1900
20/VQFN
1.90
0.4
50
8/SON, 8/VSSOP
0.90
Digital input
Protection
Field Inputs
From Sensors
Protection
Digital
Input
Serializer
0 24 V
24V
Digital
Isolation
Controller
Interface
Protection
Protection
LEGEND
24 V
TI Designs
Name
Description
The TIDA-00017 reference design provides a complete 8-channel digital input module
front-end reference design for programmable logic controllers (PLCs). It is designed and
fully tested to meet IEC61000-4 EMC and surge requirements for industrial automation
systems thus reducing the time to market for customer. The design serializes 8 digital
inputs, up to 34 V each, minimizing the number of isolation channels and GPIO pins
required of the host interface. Serialized data and control signals are galvanically isolated
from the PLC using TIs high-speed, 4242 V peak, digital isolator technology. The design
also includes an over-current protected, isolated power supply providing all necessary
module voltages. Full documentation, test results, design files and necessary firmware
are also available for this design.
Communication
Fieldbus OUT
Key Features
Fully tested to comply with IEC61000-4 for ESD, EFT and surge
Input protection circuitry and integrated 15 kV ESD protection
User-programmable current limit of 2 mA on inputs for overcurrent protection
Galvanic isolation on data and SPI data up to 4242 V peak
Integrated over-temperature indicator to disconnect inputs when fault conditions
occur
Slim form factor 95 x 50x 10 mm (LxWxH)
Digital serializers
# of Inputs
Interface
I/O max
rate
(kbps)
SPI
1000
10 to 34
0 to 34
SPI
1000
18 to 30
0 to 30
Part Number
Description
SN65HVS881
SN65HVS880
Operating
Voltage
(V)
I/O
Voltage
(V)
Special Features
Parity, over
temperature,
cascadable, drivers
for external LEDs
Voltage monitor,
over temperature,
cascadable, drivers
for external LEDs
I/O Current
(mA)
Operating
Temperature
Range (C)
Pin/Package
Price*
(US$)
0.2 to 5.2
40 to 125
28/HTSSOP
2.00
0.2 to 5.2
40 to 85
28/HTSSOP
1.90
Digital output
Overview / TI Designs
Texas Instruments digital output solutions address a wide range
of digital output modules in the factory automation industry
including low-side and high-side driving capabilities at 24 V
nominal voltage. It also showcases solutions for push-pull high
frequency outputs known as Pulse Train Output (PTO). The
TI Designs
Name
Description
Key Features
High density 8 ch 24 V low side digital output
500 mA /ch. unregulated (+20%), 2 A peak
Parallel control for simple MCU interface
Capable of switching inductive loads
LED to indicate output state and faults
BeagleBone Black cape form factor for easy evaluation
Texas Instruments
Processor
Interface
RF/IF
Amplifier
Digital output
Description
Key Features
The TIDEP0027 high performance pulse train output (PTO) with PRU-ICSS for industrial
application combines the AM335x SitaraTM processor family from Texas Instruments (TI)
and the PTO module into a single system-on-chip (SoC) solution. The design is based
on the TMDSICE3359 Industrial communications engine (ICE) but can be also used with
other PRU-ICSS capable development boards.
High speed/frequency with high precision for accurate PTO control and
synchronization
Implementation without external ASIC or FPGA
Implementation on PRU-ICSS with Sitara processor
Contains PRU-ICSS firmware in source code and can get adoptable by customer
Easy evaluation with TMDSICE3359 Industrial Communication Engine (ICE) EVM
This sub system design (TIDA-00233) shows an IC based implementation of overvoltage, over-current, reverse current, reverse polarity and miss wire protection
which is more accurate, lower power and faster compared to fuses, PTCs and diodes.
Programmable logic controller (PLC) I/O modules connected to a field power supply
benefit from protection on the 24 V field input connectors as power supply faults or miss
wiring might damage or cause the module to not operate correctly.
Drivers
Vs
(Min)
(V)
Vs
(Max)
(V)
Output
Current (Max)
(A)
8.2
60
8.2
60
DRV8806
8.2
DRV8844
DRV8860
Part
Number
Description
DRV8803
DRV8804
Control
I/F
Operating
Temperature
Range (C)
Pin/Package
Price*
(US$)
PWM
40 to 85
20/SOIC, 16/HTSSOP
1.40
Serial
40 to 85
20/SOIC, 16/HTSSOP
1.40
40
Serial
40 to 85
16/HTSSOP
1.25
60
2.5
PWM
40 to 85
28/HTSSOP
2.50
38
0.56
Serial
40 to 85
16/TSSOP
1.50
Microcontrollers
Part Number Description
MSP MCUs
16- and 32-bit mixed-signal processors designed for ultralow-power sensing applications, including those operating on a
current loop; portfolio features up to 48 MHz, 512 KB non-volatile
memory (Flash/FRAM), 64 KB SRAM and smart analog and digital
peripherals
C2000
Core
Communication Interface
MSP430/ ARM
Cortex-M4
Proprietary
ADC, DAC
ADC, DAC
ADC, DAC
Safety
ADC, DAC
Safety
TM4C
ARM Cortex-M4
RM4x
ARM Cortex-R4
TMS570
Texas Instruments
ARM Cortex-R4
ethernet, USB
UART, I2C, SPI, CAN,
ethernet, USB
UART, I2C, SPI, CAN,
ehernet, USB
Analog I/O
24-bit SD ADCs,
14-bit SAR
ADCs, DACs,
Op Amps,
Comparators,
LCD
End Equipment
Sensor transmitters, metering solutions,
current loop controllers
Description
5 V, multipoint RS-485/RS422 transceivers
5 V, low power, half-duplex
RS-485/RS-
SN65HVD77
SN65HVD78
SN65HVD255
SN65HVD256
TRS3253E7
Date
Duplex
ESD
10 to 15
55
32
10 Mbps
Half
+500V HBM
14 to 14
0.9
32
2.5 Mbps
Half
+2kV HBM
13 to
16.5
9 to 14
Supply
Voltage(s)
(V)
+4.75 to
+5.25
+4.75 to
+5.25
Special
Features
Operating
Temperature
Range (C)
Pin/Package
Price*
(US$)
Industry standard
40 to 85
8/SOIC, 8/PDIP
0.52
Low power
(Typical ICC = 200uA)
40 to 85
8/SOIC, 8/PDIP
0.87
3.3
High ESD
Low power
40 to 125
8SOIC
8MSOP
1.9
3.3
High ESD
Low power
40 to 125
8SOIC
8SON
8VSSO
1.0
40 to 85
8SOIC
1.54
Requirements
4.5 to 5.5 Meetsofthe
ISO11898-2
-40 to 125
8SOIC
0.50
1.1
96
50 Mbps
Full
.95
200
50 Mbps
Half
160
40 Mbps
Half
85
167
1 Mbps
85
167
1 Mbps
-40 to 125
8SOIC
0.50
1 Mbps
8 kV IEC 61000-4-2
air-gap discharge, 8 kV
IEC 61000-4-2 contact
discharge, 15 kV human
body model
40 to 85
32/VQFN
1.12
10-kV HBM
3 to 5.5
LVDS devices
Feature
3.3
3.3
3.3
Device
Description
DS90LV001
DS90LV011A
DS90LT012A
DS90LV047A
DS90LV048A
Signal
rate
Channel (Mbps)
Supply
input
Operating Temperature
Pin/
Range (C)
Package
Price*
(US$)
Input
Output
800
LVDS
LVPECL
CML
LVDS
40 to +85
8/WSON
8/SOIC
0.76
400
LVTTL
LVDS
40 to +85
5/SOT-23
0.42
400
LVDS
LVTTL
40 to +85
5/SOT-23
0.49
16/SOIC
16/TSSOP
16/SOIC
16/TSSOP
1.09
3.3
400
LVTTL
LVDS
40 to +85
3.3
400
LVDS
LVTTL
40 to +85
1.09
Logic
LVC
VCC
(Min)
(V)
VCC
(Max)
(V) Bits(#)
Voltage
(Nom)(V)
F @ Nom
Voltage
(Max)(Mhz)
ICC @ Nom
Voltage
(Max)(mA)
tpd @ Nom
Voltage(Max)(ns)
Operating
Temp. (C)
Pin/ Package
Price*
(US$)
Part Number
Description
SN74LVC1G57
SN74LVC14A
Hex Schmitt-trigger
inverter
SN74LVC1G125
1.65
5.5
150
SN74LVC1G17
Single Schmitt-trigger
buffer
1.65
5.5
150
SN74LVC00A
Quadruple 2-input
positive-NAND gate
1.65
3.6
SN74LVC244A
1.65
3.6
SN74LVC541A
1.65
SN74LVC245A
1.65
1.65
5.5
150
0.01
40 to 125
0.07
3.6
100
0.01
40 to 125
0.07
0.01
9, 5.5, 4.5, 4
40 to 125,
40 to 85
0.07
0.01
40 to 125,
40 to 85
0.07
0.05
150
0.04
40 to 125
100
0.04
40 to 125,
40 to 85
0.08u
3.6
100
0.01
40 to 125
40 to 85
0.14
3.6
100
0.03
40 to 125
0.12
10
Texas Instruments
Isolation barrier
12-24 V
Backplane
DC/DC LDO
Isolated DC/DC
Analog 5 V, 10 V, 15 V, 10 V
Digital 1.0 V, 1.8 V, 3.3 V, 5 V
Supervisor
Sequencer
TI Designs
Name
Description
Key Features
The TIDA-00129 reference design is a 1 W power supply with dual isolated outputs for
1 W small form factor power supply space constrained applications. With 24 V and 3.3 V isolated outputs, this design was
with isolated dual output for PLC
created specifically to power programmable logic controller (PLC) I/O modules in a
I/O modules
factory automation setting. This design was created to comply with IEC 61010-1, which
in turn will provide a designer faster time to market with their own design.
The TIDA-00400 isolated power supply reference design provides multiple isolated
Isolated power supply for
outputs to supply the bias voltage needed in a programmable logic controller (PLC) IO
programmable logic controller
module. It generates 3 isolated outputs: 15 V@30 mA and +5 V@4 0mA. These voltage
(PLC) I/O modules reference design rails can satisfy most of the required voltage rails in the I/O modules, such as the opamp, DAC bias, RS-485 transmitter and digital isolator power supplies.
16-channel shift register with wide range constant current sinks (2-35 mA)
Two-level selectable LED brightness to compensate for ambient light
Diagnostic features: LED open and LED shorted to ground
Standardized SPI connects seamlessly to standard processors
Number of channels can be increased by daisy-chaining multiple LED driver
devices
BeagleBone cape support for easy evaluation
Analog input and output modules are a standard component in programmable logic
controllera (PLC) or distributed control systems (DCS). More channels per module
and slimmer modules bring design challenges to the isolated power supply in those
Ultra-small 1 W, 12 V-36 V iso
modules. Anyone facing those challenges will benefit from TIDA-00237, as the total
power supply for analog prog logic
design footprint is less than 2.54x2.54 mm and less than 5 mm height. It uses a Flybuck
controller modules
approach which means no optocoupler feedback with wide input voltage range of 12V36 V. The design provides 15 V and 5 V isolated, low noise outputs optimal for driving a
data converter or analog front end.
Texas Instruments
11
Description
Positive high voltage hot swap / inrush
current controller with power limiting
High-side protection controller with low
quiescent current
LM5050
VIN (Min)
(V)
VIN (Max)
(V)
9
5.5
Current Limit
Threshold (A)
Enable
80
46.5
65
Externally
adjustable
Operating
Temperature
Range (C)
Pin/Package
Price*
(US$)
40 to 125
10/VSSOP
1.47
Special Features
Yes
Fault Response
Auto retry
latch off
Yes
Latch off
No external RSENSE
40 to 125
10/VSSOP
1.09
AUX input
oring control
40 to 125
6/SOT
0.87
75
VIN
(Min)
(V)
VIN
(Max)
(V)
VOUT
(Min)
(V)
VOUT
Vdo
(Max) Iq (Typ) (Typ)
(V)
(mA) (mV)
1.25
13.7
Description
Output Options
Iout
(Max)
(A)
TLV1117
Adjustable output
0.8
2.7
25
LM317
Adjustable output,
programmable output
0.03
1.4
5.5
UA78L05
Fixed output
0.15
2.7
Fixed output
0.03
LP2985-50
1200
Overcurrent protection,
thermal shutdown
Fixed Fixed
outputs outputs
0.05
2000
Overcurrent protection,
thermal shutdown
30
Fixed Fixed
outputs outputs
3.8
1700
42
Overcurrent protection,
thermal shutdown
1.4
5.5
Fixed Fixed
outputs outputs
0.85
280
30
Overcurrent protection,
thermal shutdown
2.7
30
Fixed Fixed
outputs outputs 0.001
300
TLV733P
0.03
1.4
5.5
Fixed Fixed
outputs outputs 0.034
122
Adjustable output
0.15
36
1.2
33
0.06
260
Adjustable output,
negative output
0.2
36
1.18
33
0.05
216
TPS7A3001
Operating
Temperature
Pin/
Range (C) Package
DDPAK/TOSON,
40 to 125, 263,
SOT-223,
0 to 125
TO-220,
TO-252
DDPAK/TO263, PFM,
0 to 125
SOT-223,
TO-220
SOT0 to 125 SOIC,
89, TO-92
Additional Features
0.08
TPS709
TPS7A4901
Noise
(uVrms)
Price*
(US$)
0.18
0.18
0.09
40 to 125
SOT-23
0.18
40 to 125
5/SOT, 6/
SON
0.39
40 to 125
5/SOT, 4/
SON
0.17
40 to 125
8/MSOPPowerPAD
1.10
40 to 125
8/MSOPPowerPAD
1.50
DC-DC regulators
VIN
VIN
VOUT VOUT
(Min) (Max) (Min) (Max)
(V)
(V)
(V)
(V) Iout (A) Topology
Switch
Duty
Current
Iq
Cycle
Limit
(Typ) (Max)
(Typ) (A) (mA) (%) Soft Start Compensation
Part Number
Description
TPS62097
2 A step down
converter with
selectable switching
frequency in HotRod
package
2.5
0.8
Buck
3.6
0.04
100
Adjustable
Internal
TPS62175
4.75
28
0.5
Buck,
synchronous
buck
0.022
100
Adjustable
Internal
TPS62150
317 V 1 A step-down
converter with DCSControl
17
0.9
Buck,
synchronous
buck
1.7
0.017
100
Adjustable
Internal
TPS54062/61
4.7 V to 60 V input,
50 mA/200 mA
synchronous stepdown converter
4.5
60
0.8
58
0.050/
0.200
Buck
0.13/0.35 0.09
98
Fixed
External
LM5017
100
1.25
90
0.6
Constant
on-time
synchronous
buck
90
External
12
1.3
1.75
Operating
Temperature
Pin/
Range
(C)
Package
Special Features
Enable, light load
efficiency, output
discharge,
40 to 125 11VQFN
power good, pre-bias
start-Up, synchronous
rectification,tracking
Enable, light load
efficiency, sleep mode, 40 to 85
10/SON
power good
Enable, light load
efficiency, power
40 to 85
16/QFN
good, tracking, voltage
margining
Enable, frequency
synchronization, light
load efficiency
Price*
(US$)
0.70
0.98
8/SON, 8/
VSSOP
0.88
No
Intelligent current limit,
8/SO
compensation primary-side Flybuck 40 to 125 PowerPAD,
needed
regulation
8/WSON
1.57
40 to 125
Texas Instruments
Input Bias
Current
Output () (Max) Number of
Type
(nA)
Channels Special Features
TPS3701
36 V window comparator
with internal ref for over- and
undervoltage detection
1.8
36
28
5.5
0.011
Open
drain
LMV762
2.7
0.12
0.7
Push-pull
0.005
TPS3700
1.8
18
29
5.5
0.013
Open
drain
25
25
Hysteresis, internal
reference
Hysteresis, internal
reference
RailRail
Operating
Temperature
Range (C)
In
40 to 125
In
Pin/
Package
Price*
(US$)
6/SOT
0.89
40 to 125
8/SOIC,
8/VSSOP
0.85
40 to 125
6/SOT,
6/WSON
0.70
Microprocessors
Part Number Description
Sitara
Sitara processors with ARM Cortex-A8 core and integrated
industrial communications support
AM335x
Sitara
AM4xxx
Sitara
AM5xxx
66AK2L06
Core
ARM Cortex - A8
Communication Interface
USB, UART,I2C, SPI, Industrial
Ethernet
Analog I/O
End Equipment
Communication module
PLC controller (CPU)
ADC
ARM Cortex - A9
12-bit SAR
ADC0
12-bit SAR
ADC1
Motor control
PLC controller (CPU)
PMIC
DFE
Communication modules
PLC controller (CPU)
Description
EtherCAT
Communications
Development Platform
PROFIBUS Communications
Development Platform
Texas Instruments
Key Features
AM335x ARM Cortex-A8 processor-based design enables 40% system BOM savings
by eliminating external ASIC/FPGA
Access to other peripherals and interfaces for a scalable HMI, PLC and I/O solution
PROFIBUS slave certified by Siemens authorized test labs
Pre-tested protocol stack for evaluation
Free board support package and industrial software development kit from TI
Support other industrial communications with the same hardware (e.g., EtherCAT,
Profinet, Ethernet/IP and more)
Production ready development platform sub-system includes schematics, BOM, user
guides, application notes, white paper, software, demos and more
13
Description
Ethernet/IP communications
development platform
Powerlink on TI SitaraTM
processors
Multi-Protocol industrial
ethernet detection with
PRU-ICSS
14
Key Features
AM335x ARM Cortex-A8 processor-based design enables 30% system BOM savings by
eliminating external ASIC/FPGA
PROFINET IO Device for conformance classes A and B certified by COMDEC
High performance PROFINET cut-through switch supports 250 s cycle time with 8
real-time connections.
Very robust PROFINET switch with 4 priority queues per port and content filter passing
Netload class 3.
Free board support package and industrial software development kit from TI
Support other industrial communications with the same hardware (e.g., EtherCAT,
PROFIBUS, Ethernet/IP and more)
Production Ready development platform sub-system which includes schematics, BOM,
user guides, application notes, white paper, software, demos and more
Certified hardware and software components for Profinet IRT V2.3 device
applications. This design (TIDEP0029) integrates Industrial Ethernet Phys, Profinet
IRT switch, Profinet IRT stack and application example in one package. Profinet is
the leading Industrial Ethernet standard used by many Industrial segments and endequipment which require real-time deterministic exchange of IO data and additional
bandwidth for service and diagnostics.
AM335x ARM Cortex-A8 processor-based design enables 30% system BOM savings by
eliminating external ASIC/FPGA
Access to other peripherals and interfaces for a scalable HMI, PLC and I/O solution
Free board support package and industrial software development kit from TI
Support other industrial communications with the same hardware (e.g., EtherCAT,
PROFIBUS, PROFINET and more)
Production Ready development platform sub-system which includes schematics, BOM,
user guides, application notes, white paper, software, demos and more
The TIDEP0039 Sercos III Slave For AM437x Communication Development Platform
Reference Design combines the AM437x Sitara processor family from Texas
Instruments (TI) and the Sercos III media access control (MAC) layer into a single
system-on-chip (SoC) solution. Targeted for Sercos III slave communications, the
TIDEP0039 allows designers to implement the real-time Sercos III communication
standard for a broad range of industrial automation equipment. The design is based
on the TMDXIDK437X industrial development kit (IDK).
High speed/frequency with high precision for accurate PTO control and synchronization
Implementation without external ASIC or FPGA
Implementation on PRU-ICSS with Sitara processor
Contains PRU-ICSS firmware in source code and can get adoptable by customer
Easy evaluation with TMDSICE3359 industrial communication engine (ICE) EVM
PROFINET communications
development platform
Texas Instruments
Microcontroller
AM5xxx1
AM1810
AM335x
AM437x
PRUSS
ICSS #1
ICSS #1
ICSS #2
ICSS #1
ICSS #2
I/PTM
Industrial ethernet
-
EtherCATTM Slave
X2
Powerlink
Sercos III
Ethernet
HIPERFACE DSL
BiSS-C
X
X
X
X
X
X
X
X
SinCos
CANOpen
ProfibusTM Slave DP
Profibus Master DP
X
-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
X
-
X
-
X
-
IO-Link Slave
Industrial fieldbus
(1) Each ICSS can run any protocol listed below. Hence, any combination of protocols possible. (2) Over external ET1100
Description
Industrial temperature
10/100 Ethernet physical
DP83848I
layer transceiver in QFP
packaging
Industrial temperature
10/100 Ethernet physical
DP83848K
layer transceiver in QFN
packaging
Industrial grade QFP
10/100/1000
DP83867IRPAP packaging
Ethernet physical layer
transceiver
Industrial grade
DP83867IRRGZ 10/100/1000 Ethernet
physical layer transceiver
Interface
Cable
Length
(m)
LED
(#)
Supply
Voltage
(V)
Data Rate
(Mbps)
MII/RMII/SNI
150
3.3
MII/RMII
137
RGMII/GMII/MII
130
RGMII
Operating
Temperature
Range (C)
Pin/Package
Price*
(US$)
40 to 85
QFP-48
2.20
40 to 85
QFN-40
0.95
40 to 85
QFP-64
6.40
40 to 85
QFN-48
6.40
40 to 85
QFN-48
7.27
40 to 105
QFN-48
8.36
JTAG 1149.1
Port
Count
Special Features
10/100
Yes
Single
3.3
10/100
Yes
Single
2.5, 1.1
10/100/1000
Yes
Single
130
2.5, 1.0
10/100/1000
Yes
Single
DP83867IS
SGMII
RGMII
130
2.5, 1.0
10/100/1000
Yes
Single
DP83867E
Extended temperature
grade with SGMII
10/100/1000 Ethernet
physical layer transceiver
SGMII
RGMII
130
2.5, 1.0
10/100/1000
Yes
Single
eFuses
Part Number Description
TPS25927
TPS25921
TPS25942
28
8%
4.5 to 18
1.6
90.0
2%
42
8%
Texas Instruments
Special Features
Reverse current protection, thermal
shutdown, undervoltage protection
Fault reporting, overvoltage
protection, undervoltage protection
Current sense/monitor, fault
reporting, overvoltage protection,
power good, reverse current
protection, thermal shutdown,
undervoltage protection
Operating
Temp. (C)
Pin/
Package
40 to 85
10VSON
Price*
(US$)
0.55
40 to 85
8SOIC
0.50
40 to 85
20WQFN
1.10
15
Part Number
Description
2.95 V to 6 V input,
2/3 A synchronous
TPS54218/318
2.9
step-down SWIFT
converter
4.5 V to 17 V input, 3 A
TPS54320
synchronous step-down 4.5
SWIFT converter
28 Vin, 0.5 A step-down
TPS62175
converter with DCS4.75
Control
Integrated, 5 A 40 V
wide input range boost/
TPS55340
2.9
SEPIC/flyback DC-DC
converter
4.5 V to 60 V input
3.5 A / 5 A step-down
TPS54360/560
4.5
DC-DC converter with
Eco-mode
TPS54361/561
4.5
Switch
Duty
Current
Iq
Cycle
Limit
(Typ) (Max)
(Typ) (A) (mA) (%) Soft Start Compensation
0.8
4.5
2/3
Buck
2.9/4
0.35
98
Adjustable
External
17
0.8
15
Buck
4.2
0.6
98
Adjustable
Internal
28
0.5
Buck,
synchronous
buck
0.022
100
Adjustable
Internal
32
38
Boost, SEPIC,
flyback
0.5
90
Adjustable
External
60
0.8
58.8
3.5/5
Buck,
inverting
buck-boost
5.5/7.5
146
98
No
External
60
0.8
59
3.5/5
Buck
5.5/7.5
152
98
Adjustable
External
Operating
Temperature
Pin/
Range
(C)
Package
Special Features
Price*
(US$)
Enable, frequency
synchronization, power 40 to 150 116/WQFN 1.40/1.80
good, tracking
Enable, frequency
synchronization, power 40 to 150
good, tracking
Enable, light load
efficiency, sleep mode, 40 to 85
power good
14/VQFN
1.50
10/SON
0.70
Enable, frequency
14/HTSSOP,
synchronization, power 40 to 125
16/WQFN
good
Enable, frequency
synchronization,
light load efficiency,
adjustable UVLO
Enable, frequency
synchronization,
light load efficiency,
power good, tracking,
adjustable UVLO
1.85
40 to 125
8SO
PowerPAD
2.30
40 to 125
0.88
3.00
TPS53317
DDR Memory
Type
DDR, DDR2,
3 A sink/source DDR termination regulator DDR3, DDR3L,
with VTTREF buffered reference
DDR4, LPDDR2,
LPDDR3
DDR, DDR2,
6 A, low input voltage synchronous stepDDR3, DDR3L,
down SWIFT converter
DDR4, LPDDR2,
LPDDR3
IOUT
VTT
(Max)
(A)
IOUT
VTT
(Max)
(A)
1.1
3.5
VIN
(Max) Iq (Typ)
(V)
(mA)
Output
Additional Features
Operating
Temp. (C)
Pin/
Package
Price*
(US$)
0.5
VREF
VTT
40 to 85
10/VSON
0.75
0.32
VTT
40 to 85
20/VQFN
2.60
Vin (V)
AM335x ZCE
2.7 to 5.8
AM335x
1.7 to 5.5
12
AM335x
AM437x
AM335x
1.5 to 6.6
2.2 to 5.5
TPS65218
# of
DC/DC
DC/DC
Regulator Step-Up Step-Down
Outputs Converter Converter
MCU/processor
attached
Pin/ Package
Price*
(US$)
48/VQFN
3.45
48/VQFN
2.75
2.20
32/VQFN
48/HTQFP
48/VQFN
LDO
3.45
Load switches
Part Number Description
Vin (Max)
(V)
Imax
(A)
Ron
(m)
Leakage
Current
(A) (Typ)
Channels
TPS22954
0.7 to 5.7
14
34
TPS22968
0.8 to 5.5
25
55
TPS22960
1.62 to 5.5
0.5
435
Texas Instruments
Special Features
Adjustable rise time,
power good, quick
output discharge Vbias
Adjustable rise time,
quick output discharge
Vbias
Quick output discharge
Operating
Temp. (C)
Pin/
Package
Price*
(US$)
40 to 105
10/WSON
0.36
40 to 85
14/WSON
0.36
40 to 85
8/SOT-23
8/UQFN
0.36
16
Clocking
DP83848
10/100 Mbps
Ethernet PHY
10/100M/
1G/10G
PHY
Number of
Outputs
Output Levels
CDCE(L)913
LVCMOS
Max Output
Frequency in
MHz
VCC Core (V) VCC Out (V)
Programmability
Dividers
3.3/2.5/1.8
Jitter
RMS
Operating
Temperature
Range (C) Pin/Package
CDCE(L)949
LVCMOS
230
1.8
3.3/2.5/1.8
CDCM6208
800
3.3/2.5/1.8
3.3/2.5/1.8
Fractional and
integer
Fractional and
integer
Fractional and
integer
Fractional and
integer
Fractional and
integer
Fractional and
integer
Fractional and
integer
2/5
1175
3.3
3.3
SPI, EEPROM
integer
500 fs
40 to 85
CDCM9102
HCSL
100
3.3
3.3
uWire, pin
500 fs
40 to 85
LMK03328
1000
3.3
3.3/2.5/1.8
integer
Fractional and
integer
32 or 48/
VQFN
32/VQFN
100 fs
40 to 85
48/WQFN
230
1.8
CDCEL824
LVCMOS
201
1.8
1.8
CDCE(L)925
LVCMOS
230
1.8
3.3/2.5/1.8
CDCE906
LVCMOS
167
1.8
3.3
3.3/2.5/1.8
CDCE(L)937
CDCE62002/5
LVCMOS
230
1.8
Price*
(US$)
> 1ps
40 to 85
14/TSSOP
1.6
> 1ps
40 to 85
16/TSSOP
1.85
> 1ps
40 to 85
16/TSSOP
1.93
> 1ps
40 to 85
20/TSSOP
2.2
> 1ps
40 to 85
20/TSSOP
2.14
> 1ps
40 to 85
24/TSSOP
2.35
265 fs
40 to 85
48/VQFN
5.2
6.60 to 7.5
10
2.25
2/4/6/8/10/12
CDCVLD12xx
4/8/10/12/16
CDCLVP11xx
2/4/8/10
CDCV304
LMK0010x
5/10
LMK0030x
4/6/10
LMK0033x
4/8
CDCUN1208LP
Output Levels
LVCMOS
LVDS
LVPECL
LVCMOS
LVCMOS
LVPECL, LVDS, HCSL, LVCMOS
HCSL
LCMOS, LVDS, HCSL
Max Output
Frequency in
(MHz)
Pin/Package
Price* (US$)
250
2.5/3.3
40 to 85
8 to 24/TSSOP
0.90 to 2.60
800
2.5
40 to 85
16 to 48/VQFN
2.85 to 5.90
2000 to 3500
2.5/3.3
40 to 85
16 to 32/VQFN
3.15 to 5.55
200
2.5/3.3
40 to 85
8/TSSOP
1.2
200
2.5/3.3
40 to 85
24 or 32/WQFN
2.25 or 2.95
3100
2.5/3.3
40 to 85
32 or 28/WQFN
3.35 to 5.25
400
2.5/3.3
40 to 85
32 or 40/WQFN
1.20 or 1.80
400
1.8/2.5/3.3
32/VQFN
Texas Instruments
17
Notes
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
18
Texas Instruments
Sma
r
Solu t Grid &
tions
E
Guid nergy
e
ation
unic
omm
C
l
e
stria
Indu tion Guid
Solu
tio n s
S o lu
In d u st
u to
ri al A
m at io
Connected Sensors
Building Automation
Systems Guide
Grid
Infrastr
ucture
Sm
art Gr
id Co
Sm
mmun
art Ut
icatio
ility M
Rene
ns
eters
wable
Ener
gy
ti.com
/smar
tgrid
2015
2015
ation
/autom
ti.com
www.
www.ti.com/buildingAutomation
2015
Asia
support.ti.com
e2e.ti.com
Phone
+1(512) 434-1560
Phone 0800-891-2616
Phone 0800-670-7544
Fax
+1(972) 927-6377
Internet/Email support.ti.com/sc/pic/americas.htm
Phone
European Free Call
00800-ASK-TEXAS
(00800 275 83927)
International
+49 (0) 8161 80 2121
Russian Support
+7 (4) 95 98 10 701
Note: The European Free Call (Toll Free) number is not active in all c ountries.
If you have technical difficulty calling the free call number, please use the
international number above.
Fax
+(49) (0) 8161 80 2045
Internet www.ti.com/asktexas
Direct Email
asktexas@ti.com
Japan
Fax International +81-3-3344-5317
Domestic
0120-81-0036
Internet/Email International support.ti.com/sc/pic/japan.htm
Domestic www.tij.co.jp/pic
Phone
Toll-Free Number
Note: Toll-free numbers may not support
mobile and IP phones.
Australia
1-800-999-084
China
800-820-8682
Hong Kong
800-96-5941
India
000-800-100-8888
Indonesia
001-803-8861-1006
Korea
080-551-2804
Malaysia
1-800-80-3973
New Zealand
0800-446-934
Philippines
1-800-765-7404
Singapore
800-886-1028
Taiwan
0800-006800
Thailand
001-800-886-0010
International +86-21-23073444
Fax +86-21-23073686
Email tiasia@ti.com or ti-china@ti.com
Internet support.ti.com/sc/pic/asia.htm
SLYY041C
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the
right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46,
latest issue, and to discontinue any product or service per JESD48,
latest issue. Buyers should obtain the latest relevant information
before placing orders and should verify that such information is current
and complete. All semiconductor products (also referred to herein as
components) are sold subject to TIs terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications
applicable at the time of sale, in accordance with the warranty in
TIs terms and conditions of sale of semiconductor products. Testing
and other quality control techniques are used to the extent TI deems
necessary to support this warranty. Except where mandated by
applicable law, testing of all parameters of each component is not
necessarily performed.
TI assumes no liability for applications assistance or the design of
Buyers products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated
with Buyers products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or
implied, is granted under any patent right, copyright, mask work
right, or other intellectual property right relating to any combination,
machine, or process in which TI components or services are used.
Information published by TI regarding third-party products or services
does not constitute a license to use such products or services or a
warranty or endorsement thereof. Use of such information may require
a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or
other intellectual property of TI.
Reproduction of significant portions of TI information in TI data
books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions,
limitations, and notices. TI is not responsible or liable for such
altered documentation. Information of third parties may be subject to
additional restrictions.
Products Applications
Audio
Amplifiers
Data Converters
DLP Products & MEMS
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
OMAP Applications Processors
Wireless Connectivity
Applications
www.ti.com/audio
Automotive and Transportation www.ti.com/automotive
amplifier.ti.com
Communications and Telecom www.ti.com/communications
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
www.ti.com/dlp
Consumer Electronics
www.ti.com/consumer-apps
dsp.ti.com
Energy and Lighting
www.ti.com/energy
www.ti.com/clocks Industrial
www.ti.com/industrial
interface.ti.com Medical
www.ti.com/medical
logic.ti.com Security www.ti.com/security
power.ti.com
Space, Avionics and Defense www.ti.com/space-avionics-defense
microcontroller.ti.com
Video and Imaging
www.ti.com/video
www.ti-rfid.com
www.ti.com/omap
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity