Professional Documents
Culture Documents
FLAIL MOWERS
KNIFE TYPE I
KNIFE TYPE II
GENERAL DATA
TABLE OF CONTENTS:
FLAIL MOWERS
p. 3
GENERAL DATA
p. 4
LIGHT CLASS
KNIFE TYPE IV
p. 6
MIDDLE CLASS
p. 6 - 7
MIDDLE CLASS
KNIFE TYPE V
KNIFE TYPE VI
50 mm
are designed for works related to maintenance of municipal infrastructure, urban greenery and orchards. Machines of this
type are used for mowing grass, shrubs, bushes (up
to 10 cm) and cutting weeds on uncultivated areas to leave windrows. Particularly useful in mo-
80 mm
p. 8 - 9
p. 10
133
HEAVY DUTY
KBK / RIO
p. 11
108
HEAVY DUTY
Designation: grass, plant stalks,
shrubs, shoots, thin branches
20 mm
108 mm
20 mm
8 cm)
133 mm
p. 12
MIDDLE CLASS
KNIFE TYPE X
Designation: grass, plant stalks,
small shrubs, branches
Max. diameter of cut branches: 35 mm
35 mm
p. 14 - 15
PANTOGRAPH
HEAVY DUTY
p. 20 - 21
REAR + EQUIPMENT
p. 16- 17
REAR + EQUIPMENT
p. 18 - 19
REAR + EQUIPMENT
OPERATING FITTINGS
HEAVY DUTY
133
MIDDLE CLASS
168
MIDDLE CLASS
KNIFE TYPE IX
Designation: grass, plant stalks,
small shrubs, branches
168
p. 13
PANTOGRAPH
168
p. 22 - 23
p. 24
Type
STANDARD
OPTION
PIKO
vII
vIII, X
GRINO
II, III, Iv
KB
II, III, Iv
MAMUT
vI
II, III, Iv
KBK
II, III, Iv
RIO
vI
II, III, Iv
KBR
II, III, Iv
KANGU
II, III, Iv
KBRP
II, III, Iv
LAMA
vII
vIII, IX
KW
II, III, Iv
EMU
4.
133 mm
168 mm or
10 cm)
168 mm
4.
5. Sliding skids and internal cover made of Hardox
steel
6.
7. Higher durability of thick-walled drive shaft and
ground folowing bar
FLAIL MOWERS
FLAIL MOWERS
are
perfect for mowing uncultivated areas, paths in orchards, cutting weeds, shrubs and
grass on uncultivated areas.
Durable housing and inclined
rubber shield enable safe
mowing nearby roads, parks
living areas.
semblies. PIKO mower can be aggregated typically with tractors on a tractors 3-point linkage Cat. I (3-point linkage Cat. I). Mower can
be mounted both at tractors rear and front,
1.
res, pitches, road shoulders, parks of moderate
congestion.
2. Is used for levelling surfaces and molehills, mowing, shredding grass and weeds, which if scattered over the surface putrefy faster and fertilize
green areas.
Type
Operating
width
[m]
Operating
output
[ha/h]
Knives
[pcs.]
1,00
~ 1,00
26
1,30
~ 1,30
34
1,50
~ 1,50
40
Cutting
shaft
diameter
[mm]
Tractor
power
[HP]*
PTO
[rpm]
3-point
linkage
Cat.
from 20
108
from 30
from 35
540
Measurements
w / l / h.
[cm]
Weight
[kg]
87 / 129 / 83
175
87 / 159 / 83
200
87 / 200 / 83
220
* Note Power values are given for municipal works (few mowing occasions per year). When mounting mower at tractors front, tractors power value
needs to be 30% bigger.
1.
precise mounting and bolt arrangement on bar imditions
2. Mounting on tractors either front or rear 3-point
linkage
3.
Type
Operating
width
[m]
Operating
Knives
output
[pcs.]
[ha/h]
1,10
~ 0,50
10
1,40
~ 0,60
12
1,60
~ 1,00
14
v-belts
[pcs.]
Cutting
shaft
diameter
[mm]
Tractor
power
[HP]*
PTO
[rpm]
3-point
linkage
Cat.
from 20
4
133
from 40
540
I-II
from 60
** If Kb 140 or Kb 160 mowers are ordered for tractors front then gear 1000 rpm should be ordered as well.
Measurements
w/l/h
[cm]
Weight
[kg]
140 / 109 / 90
325
180 / 125 / 90
465
190 / 125 / 90
500
FLAIL MOWERS
REAR AND FRONT
MIDDLE CLASS
Perfect for
1.
cise mounting and arrangement of bolts on shaft
conditions
2.
168 mm) improves its stiffness and peripheral speed of knives
3. Mounting on 3-point linkage at tractors front or
rear
4.
5.
6.
height
7. Top-quality metal sheet guards at mowers front
and rubber guard at mowers rear provide effective
protection against thrown out stones
8. Standard-delivered PTO shaft
9. Adjustment of mowing height within range of 3
and 8 cm with use of ground following bar
Strengthened enclosure and enhanced bea-
3. Mower is hydraulically adjustable in relation to either tractors left or right side. Features
standard-mounted hydraulic cylinder
4. New stronger housing has been designed to provide effective protection of bearings against
dirt, while extending mowers lifespan
Type
Operating
width
[m]
Operating
output
[ha/h]
Knives
[pcs.]
1,80
~ 1,60
24
2,00
~ 1,80
30
2,20
~ 2,00
36
Cutting
shaft
diameter
[mm]
168
Tractor
power
[HP]*
from 90
PTO
[rpm]
540 / 1000
3-point
linkage
Cat.
I/II
Measurements
w/l/h
[cm]
Weight
[kg]
570
610
640
* Note! Power values apply only to municipal works - few mowing occasions per year.
** Mower is standard-equipped with a 540 rpm option. For mounting mower at tractors front, change rpm amount to 1,000 rpm
by adjusting belt gear.
FLAIL MOWERS
KB 182
KB 252
4
3
1
Kb
heavy
duty
mowers
have also increased
diameter and thickness
-
8
16
9.
4.
height
13. Top quality protective chains at the front and
Type
Operating
width
[m]
Operating
output
[ha/h]
KB 182
1,80
~ 1,30
Cutting
shaft
diameter
[mm]
Tractor
power
[HP]*
PTO
[rpm]
3-point
linkage
Cat.
from 70
Dimensions
w/l/h
[cm]
Weight
[kg]
700
715
840
16
Knives
[pcs.]
KB 252
2,00
~ 1,60
2,50
~ 2,20
168
20
from 80
1000
from 90
II
FLAIL MOWER
FLAIL MOWERS
KBK 181
KBK 251
1.
soil fertalisation aiding plants (lupinus, phacelia, sias plant remains like thick stalks as corn stalks for
ploughing.
2. It is also used for treatment of sterile pastures and
maintenance of green areas which are not cultivated.
4.
possible
4.
diameter - KbK
5.
6. Perfect ground following for optimal mowing
quality
7.
8. Top quality protective chains
quality
9.
Type
2,80
~ 2,80
36
203
9.
Drive transmission through belt gear acts as
8.
Cutting
shaft
diameter
[mm]
applied
been reduced
Knives
[pcs.]
168. RIO
Operating
output
[ha/h]
Operating
width
[m]
1. Outlet damper
overload clutch
11. PTO shaft with overrunning clutch as standard
12. Possibility of mounting hydraulic cylinder for
cutterbar shifting
Tractor
power
[HP]*
PTO
[rpm]
from 140
1000
3-point
linkage
Cat.
Dimensions
w/l/h
[cm]
Weight
[kg]
II
1040
Type
Operating
width
[m]
Operating
output
[ha/h]
KBK 181
1,80
~ 1,30
2,00
~ 1,60
2,50
~ 2,20
20
2,80
~ 2,80
36
KBK 251
Knives
[pcs.]
16
Cutting
shaft
diameter
[mm]
Tractor
power
[HP]*
PTO
[rpm]
3-point
linkage
Cat.
from 70
168
from 80
from 90
203
1000
from 140
* Note! Power values apply only to municipal works - few mowing occasions per year.
I/II
II
Dimensions
w/l/h
[cm]
Weight
[kg]
625
645
770
1050
11
FLAIL MOWERS
FLAIL MOWERS
ted on tractors rear 3-point linkage. They are perfect for mowing
road shoulders, ditches, slopes,
greenery belts (inclination up to
-65, +90). Strong, thick-walled
1. Mowing weeds, grass and mulching shrubs and
The mower is
protected against
damage
in case of driving onto an
obstacle by hydraulic
safety
device,
which
forces its retraction and at the same time lifts the machine up even
up to 50 cm thanks to hydraulic cylinder. Upon passing
by an obstacle the mower automatically returns to its
operating position - no operators action required.
Type
Operating
width
[m]
Operating
output
[ha/h]
Knives
[pcs.]
1,40
~ 0,60
12
12
~ 1,00
14
1.
chards, vineyards).
90
65
Cutting
shaft
diameter
[mm]
Tractor
power
[HP]*
PTO
[rpm]
3-point
linkage Cat.
540
II
from 50
133
1,60
er is additionally equipped
with transverse shift option
to provide easier passing of
obstacles and adjusting the
most comfortable turning.
from 70
* Note! Power values apply only to municipal works - few mowing occasions per year.
Weight
[kg]
670
Type
Operating
width
[m]
Operating
output
[ha/h]
Knives
[pcs.]
1,40
~ 1,20
26
Cutting
shaft
diameter
[mm]
Tractor
power
[HP]*
1,90
~ 1,80
34
3-point
linkage
Cat.
540
II
from 90
133
705
PTO
[rpm]
from 90
Dimensions
w/l/h
[cm]
Weight
[kg]
490
620
13
FLAIL MOWERS
REAR SIDE
ON PANTOGRAPH
HEAvY DUTY
KBRP rear
side
conditions
type
KBRP mowers are machines mounted on tractors rear. These machines are perfect for mowing road
shoulders, slopes, green division
belts (incination up to -60; +90).
Mowers equipped with type I knives are able to shred trunks with
diameter even up to 8 cm.
90
60
and
unbelivable durability of components guarantee reliable operation even with load exceeding
1,500 manhour anually.
D
B
6. New shaft bearing bedding bigger bearings lo1. Mulching shrubs and bushes (up to
8 cm)
KbRP 160
205
52
289
160
140
KbRP 200
205
52
329
200
180
linkage
ter
quality
168 mm
Type
5.
clutch
on pantograph meet standards of both municpal service companies as well as individual farmers offering services of mowing
road shoulders, slopes, embankments, ditches and water channels.
bearings are placed inside lnkage frame, which protects them against
mechanical damage.
Type
Operating
width
[m]
Operating
output
[ha/h]
1,60
~ 1,00
2,00
~ 1,60
Hedge
trimming
Road
shoulder
mowin
Knives
[pcs.]
Cutting
shaft
diameter
[mm]
14
090
060
Tractor
power
[HP]*
PTO
[rpm]
Linkage
hitch Cat.
from 70
168
16
760
540
from 80
Weight
[kg]
II
825
* Note! Power values apply only to municipal works - few mowing occasions per year.
14
15
EXTENSION
ARMS
REAR
IN
TIO
VA
O
N
N!
410
310
270
120
455
220
Machine
type
16
Operating
reach of arm
[m]
4,0
4,5
Tractor
power
[HP]
Control
PTO rpm*
[rpm]
55
link
540
Min. tractors
weight
[kg]
Transport
width
[m]
Transport
height
[m]
Weight
[kg]
2 400
2,65
1,75
530
2 900
2,90
1,85
550
17
EXTENSION
ARM
REAR
For
hard to
reach
1.
3
2
hard steel,
b
Head
E
D
F
18
340
110
640
290
190
570
450
340
130
640
290
190
580
450
350
150
650
290
190
580
450
350
120
650
290
190
660
530
430
110
720
300
190
660
530
430
130
720
300
190
675
540
440
150
730
300
190
670
540
440
150
730
300
190
Type
B
440
protects
machine against damage - in
the event of driving onto an obstacle extension arm is retracted.
A
570
As an option, installation of
electric control is possible.
Operating range
Tractors weight
of arm
[kg]
[m]
5,70
4000
6,50
4500
PTO rpm
[rpm]*
Control
Transport
width/height/length
[m]
Weight
[kg]
1 320
1 400
540
link
5,80
3 700
1 250
6,70
4 000
1 320
19
EXTENSION
ARMS
REAR
IN
TIO
VA
O
N
N!
of operation
Reach
[cm]
900
690
660
120
960
520
CAMEL 900
extension arm with LAMA 120 [cm]
mowing head
Transport positions:
Machine type
strengthening links
Optionally:
Operating
reach [m]
Control
PTO rpm*
[rpm]
Transport
width [m]
Transport
width [m]
Transport
height [m]
Weight
[kg]
9,0
link
540
6 500
2,25
4,0
1370
Electrical control
21
OPERATING
FITTINGS
OPERATING
FITTINGS
Mowing head is designed for grass trimming. It features low weight to considerably improve operation comfort.
Type
Working width [m]
Knives [pcs.]
1,20
1,40
20
24
210
210
Weight [kg]
185
205
Type
KW 125
1,10
1,25
1,40
10
10
12
Required pump
output [L/min.]
210
210
210
Weight [kg]
265
305
330
Type
Working width [m]
Nominal pressure [MPa]
Required pump delivery [L/min]
Drive type
Number of washing brushes [pcs.]
Weight [kg]
1,00
22
210
hydraulic
Perfect for both vertical and horizontal trimming of branches, bushes and hedges.
225
Type
Operating width [m]
1,50
2,00
Thickness of cut
branches max [mm]
100
100
45-60
45-60
160
200
240
Type
1,10
20
420
40
70 -100
hydraulic
2
160
Type
Weight [kg]
80-100
Weight [kg]
trees.
Capacity [l]
80 cm
90 - 100
Hydraulic
pressure [bar]
90 - 100
Type
1000
II
170
Following wheel
Yes
210
Weight [kg]
255
Type
L / H / W [cm]
60 / 47 / 50
210
70-100
370 x 12
16
Weight [kg]
90
23
SELF - COLLECTING
FLAIL MOWER WITH
CONTAINER
mower guaran-
tees long lasting and defect free operation related to maintenance of municipal infrastructure. It has 1.5 m3 container,
which is emptied with use of two cylinders tractors hydraulics (with no need of operator leaving tractor). For easier and
more comfortable operation of cutterbar, the mower is equipped with access panel.
Thanks to lowering container for mowed grass
cabin. Has 1.2 m3 container which is emptied with use of
tractors hydraulics.
allows long lasting and defect free operation related
to maintenance of municipal infrastructure. Has container with
Knives
[pcs]
Container
volume
[m3]
Cutting
shaft
diameter
[mm]
Tractor
power
[HP]*
PTO
[rpm]
3-point
linkage
Cat.
1,50
1,60
~ 1,00
14
1,20
1,40
ul. Trawiasta 15
Poland
www.samasz.com
168
60
540
II
Dimensions
w/l/h
[cm]
Weight
[kg]
735
710
905
Edition 1 / 2013 / 32
Type
Operating
width
[m]