Professional Documents
Culture Documents
Home
About
Archiv e s
Contact Us
Re source s
Search
M isce llane ous
T e chnology
Obje cts
Scie nce
Language
Busine ss
Recommend Us
Like 22,820 people like this. Sign Up to see w hat your friends lik
The SCADA often controls pumps, fans, and other machinery along with their other
characteristics. The controlling mechanisms are electronic circuits known as programmable
logic circuits or PLCs. The PLC controls the machine as well as polls the sensors for data. The
data is then sent to the control room. In the control room, the operator needs to make sense
of the data as well as issue commands like turning the machines on or off. This is where the
HMI, or Human Machine Interface, comes in. The HMI is usually a graphical layout of the
open in browser PRO version
entire system with gauges, lights, and controls situated in the corresponding locations of the
y our inbox:
machines. The gauges show the normal range of operation as well as the abnormal range so
that the operator knows if the equipment is within the accepted operating range. The lights
Em ail
may indicate if the machine is working or not, as well as the occurrence of faults. The
Subscribe
controls send the instructions to the PLC, which in turn control the machine.
The SCADA is the entirety of the system that
controls and monitors the operations of a
plant. But in general operation, most of its
parts are not really to be dealt with on a
regular basis. The majority of the time, only
the HMI is visible and interacted with. This
makes people think that SCADA and HMI are
the same or are different implementations of
the same system, when one is just an integral
part of the other.
Summary:
1. The HMI is just a part of the SCADA.
2. SCADA is a complete control system while the HMI is what the human operator
works with.
Share t his:
Search DifferenceBetween.net :
open in browser PRO version
83 emails
Difference Between Objective and
Subjective - 65 emails
Search
Custom Searc h
More
Email This Post : If you like this article or our site. Please spread the word. Share it with
your friends/family.
Difference Between DCS and SCADA
Difference Between ECM and PCM
Difference Between Human and Machine
Difference between Dcs and Plc
Difference Between PLC and RTU
Difference Between Process Capability
and Machine Capability
Difference Between Client and Server
DifferenceBetween
29,319 likes
Like Page
Share
pdfcrowd.com
Editor's Picks
Difference Between Queen and Full
Difference Between Management and
Control
L eave a Response
Email ( required )
Website
pdfcrowd.com
Please note: comment moderation is enabled and may delay your comment. There is no need
to resubmit your comment.
Submit Comment
Notify me of followup comments via e-mail
Written by : Ben Joan. and updated on October 15, 2012
pdfcrowd.com
Articles on DifferenceBetween.net are general information, and are not intended to substitute
for professional advice. The information is "AS IS", "WITH ALL FAULTS". User assumes all
risk of use, damage, or injury. Y ou agree that we have no liability for any damages.
MLA Format
Ben Joan. "Differences Between SCADA and HMI." DifferenceBetween.net. October 15, 2012
< http://www.differencebetween.net/technology/industrial/differences-between-scada-andhmi/ >.
Copyright 2016 Difference Between Use of this web site constitutes acceptance
of the Terms of Use and Privacy Policy stated here :
Legal
Subscribe Comments
pdfcrowd.com