Professional Documents
Culture Documents
Q.4 What is the meaning of Fe415 ?Ans Fe415 rafers for Ferrous material ie iron
from which the reinforcement steel bars are manufactured. The number 415 indicat
es that the Yield Strength (tensile strength when it is subjected to elongation)
of steel is 415 N/mm2. The reinforcement steel bars used in RCC (Reinforced Cem
ent Concrete) are designated in grades of Fe250, Fe415 or Fe500 depending on the
ir Yield Strength.
Q.5 How are the freeway bridges built?Ans.The traffic that is likely to go over
the bridge at a time is estimated and the cement, rocked with rubber stanchions
is placed over the freeway to build a bridge. Off-ramp from freeway to the bridg
e and on-ramp from the bridge to the freeway are constructed. Cement slabs are p
laced one by one to build a platform.
Q.7 An R.C.C. column is treated as long if its slenderness ratio is greater than
?
Ans..50
Q.8 Difference between routine maintenance and major maintenance for school faci
lities?
Ans..Routine maintenance is handling the minor repairs of the school campus. Maj
or maintenance can be total reconstruction or renovation of the school.
Q.9 Cantilever retaining walls can safely be used for a height not more than?
Ans..6 m
Ans..4%
Q. 2 What is the tallest man made structure in the world?
Ans. KVLY-TV is the best man made construction in the world. Its height is 2063
feet.
And The another one is Burj Dubai. Its height is 800 meter.
Q.3 How we can measure the concrete?
Ans. Cubic Feet, Cubic Yard and Cubic Meter are the three method which are used
to measure the concrete size.
Q. 4 What is braced excavation all about?
Ans. Excavation are braced to reduce the cave-in of surrounding unstable soil. I
t is useful to confirm the strength of the basement.
Q. 5 What do you understand by aggregate?
Ans. To resist the compression stress of a composite material,an special compone
nt is used This special component is known as aggregate.
Q.6 what is meant by shearing strain?
ANS. shearing strain is defined as the change in right angle of a body , measure
d in radians due to applied shear stress
(or)
(or)
(or)
Source: Art & Civil Engineering Image A new perspective of La Tour Eiffel.
How Much Percent (%) Useful is This Hub For You?
Less Then 50
50 to 80
80 to 100
ANS..Ennore (madras)
Q.6 Why we are not provide bar in the center of the column and bar?
Ans... Steel are provided for tension. In column max. tesile stresses are genera
ted along the column face.
Q.9 what is the difference between sill beam,Tie beam and plinth beam?( asked in
l&T )
Ans 1 Sill beam:- flexural member2 Tie beam:- fully compression member 3 plinth
beam :- loading from bottom (soil mass) is UDL so4 main reinforcement is in top
of beam.
Q.10 The foundation in which a cantilever beam is provided to join two footings,
is known as?
Ans..strap footing
Q.13 What are the cause of failure or the error made in the design of the failed
wall is ?
Ans.. The main reason of failure of a wall is overturning.