You are on page 1of 6

STEVAL-MKI094V1

MEMS demonstration board based on the LYPR540AH


(three-axis analog output gyroscope)
Data brief

Features

Two different working modes:


analog (AWM)
digital (DWM)

RoHS compliant

Description
The STEVAL-MKI094V1 is a demonstration kit
designed to provide the user with a complete,
ready-to-use platform for demonstration of the
LYPR540AH product family.
The kit includes a sensing element and an IC
interface capable of translating information from
the sensing element into a measured signal that
can be used for external applications.

STEVAL-MKI094V1

In addition to the MEMS sensor, the


demonstration board uses an ST7 microcontroller
which functions as a bridge between the sensor
and the PC. This makes it possible to download
the graphical user interface (GUI) from the
website or to use dedicated software routines for
customized applications.
The STEVAL-MKI094V1 demonstration board has
been designed for use in two different working
modes: analog and digital
In analog mode (AWM) the microcontroller on the
board is disabled and the analog outputs of the
device are available to the user on a dedicated
connector. This is the default working mode when
the power supply is applied either through the
USB connector or through the supply connector.
In digital mode (DWM) the microcontroller on the
board is enabled and it allows the user to digitally
acquire the output signals of the device, to see
them on the PC through the dedicated GUI, and
to control the control pins of the device.

September 2010

Doc ID 17907 Rev 1

For further information contact your local STMicroelectronics sales office.

1/6
www.st.com

2/6
9

.#

.#
.#

.#
.#

2%3
X8

&),46$$?'

6#/.4?'

X9

X:


Doc ID 17907 Rev 1


#
N&

2


+



+



2





#
N&

2
+

.#


#
N&

X8

.#

2
+

2%3

6#/.4?'

.#

#
N&

.#

2
+


9









5
,902!( 6DDDUT

#
N&

2%3

2%3

2%3

6$$

2%3

X9

X:


34

&),46$$?' 

34


6#/.4?' 

'.$

0$


6#/.4?' 




.#

#
N&

'.$

#
N&

2
+

#
N&


#
N&

2
+

2

2
+









# N&

(EADER

*0
8
9
:
X8
X9
X:

Figure 1.

2

Schematic diagrams
STEVAL-MKI094V1

Schematic diagrams
Sensor section







!-6

*

6

$
$0

NC

'.$
53"?MINI?"

Doc ID 17907 Rev 1

#
N&

2
+

2

#
N&

#
#
N& U&







6DDF


2LED

'LED
$&5?3%, 

#

U&





#
U&

6##

40

40

56SS
5$5$0
56CC
56DD
6DDF
6SSF
0%
0%
0%
0"
0"
0"
0"
0"
0"

!).
53"%.
)###,+
)##$!4!
6DD
6DDA
6SSA
6SS
/3#).
/3#/54
6SS
6DD
3#+
-/3)
-)3/
33
0!
0!
0!
0!
0!
0!
0!
0!
0"
0"










 34?U




 (0?U

37


















6##

#
N&

X9
9
X8
8

5
34&!24%

#
U&

07-
!).
!).
!).
!).
!).
/#-0
/#-0
0$
0$
0$
0$
0#
0#
0#
0#

07-
6PP)##3%,
2%3%4
3#,
3$!

2
+

#
N&

!).

$

.OT- OUNTED

2

2

2
2

6DDDUT

#OSC
P&

OSCIN





0$

.OT- OUNTED

34

*0

2LED

'LED

$

2
2

6DDF

-(Z

9OSCM

6DDF

34?U

2
2

#OSC
P&

OSCOUT

'


ICCSEL
N2%3%4




X:

ICCCLK
ICCDATA

6DDF


OSCIN
OSCOUT
6DDF

34
2
+

Figure 2.

2

STEVAL-MKI094V1
Schematic diagrams

Microcontroller section

AMV

3/6

Schematic diagrams
Figure 3.

STEVAL-MKI094V1
Power supply, DFU, ICP section

0/7%23500,9




*0
#URRENT?-EASURE
5
6DD?DUT
#
N&

6DDF
#
U&

#
U&











*

6##










#
N&




40

0OWER3UPPLY

,%#$

$&5
N&

5



#

N& 


1
342

6##


#

3($.

#

'.$

#

6/54

#

6##

*0




#




ICCSEL


#
N&

34!"$



#
U&6

2
+


#
U&6

2
2

1
3/

$&5?3%,

2
+

)#0
*

6##













ICCDATA
ICCCLK
N2%3%4
ICCSEL

)#0

2
+

37
.2ESET

#
N&

!-V

4/6

Doc ID 17907 Rev 1

STEVAL-MKI094V1

Revision history

Revision history
Table 1.

Document revision history

Date

Revision

10-Sep-2010

Changes
Initial release.

Doc ID 17907 Rev 1

5/6

STEVAL-MKI094V1

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to STs terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USERS OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.


Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

2010 STMicroelectronics - All rights reserved


STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

6/6

Doc ID 17907 Rev 1

You might also like