Professional Documents
Culture Documents
Use:
For installations in which the termination
is to be used as a fixed connection point and
in installations where there is a risk of
continuous very high creepage currents.
APECB 245 P
APECB 245
Standard:
Meets the requirements of:
SS, IEC (see page 8).
APECB 1703 P
insulator
synthetic
insulating oil
stress cone
base part
cable clamp
APECB 1452
APECB 841
Installation:
Installation can be simplified by assembling
the termination horizontally on the ground
before lifting it into place.
Voltage
APECB 245
APECB 170
APECB 245
kV
170
245
300
XLPE-diameter Outer
mm
sheath
min
max
mm
45.5
45.5
80
107
120
120
top bolt
APECB 1452
Design:
The cable termination consists of a
porcelain or composite insulator installed
on a box body made of Al castings.
The box body consists partly of
insulating material, which provides
insulated installation. The base part
must be installed on a bracket.
The field control component is a
prefabricated stress cone.
The insulator is filled with synthetic
insulating oil. The insulator has alternating
large and small sheds. The porcelain
insulator can be ordered in brown
or grey. The composite insulator is only
available in grey.
For the maximum permitted diameter
across the outer sheath of the cable and
the diameter across prepared insulation,
see the table below.
A screw clamp in the top fitting is used to
connect the conductor to the top bolt. Top
bolt and screw clamp are included in the kit.
Reliable
Proven
Screw technology
Can be assembled
horizontally
on the ground before
installation
Will fit large cables
Low total weight
Integrated insulated
installation
Few components
170
170
170
Prepared insulation
ABB Kabeldon
2006 Edition 1
We reserve the right to alter the design and range of our products.
95
Technical specification
APECB, APECB P
All dimensions in mm
18
Max. permissible forces
acting on the top bolt,
horizontally and
vertically: 2000 N.
378
345-350
140
345-350
Creepage distance
125
min 280
62
Fixing to bracket for 84-245 kV
Insulated or non-insulated: four 18 mm holes
for M16 bolts.
235
Designation*
Voltage
Insulator
Dimensions
B
mm
A
kV
APECB 841
APECB 1452
APECB 1703
APECB 1704
APECB 1705
APECB 2456
APECB 3006
APECB 841
APECB 1452
APECB 1703
APECB 1704
APECB 1705
APECB 2456
APECB 3006
P
P
P
P
P
P
P
84
145
170
170
170
245
300
Porslin
Porslin
Porslin
Porslin
Porslin
Porslin
Porslin
1300
1620
1860
2120
2620
2570
2570
84
145
170
170
170
245
300
Komposit
Komposit
Komposit
Komposit
Komposit
Komposit
Komposit
1320
1620
1820
2140
2720
3030
3030
Creepage
distance min
mm
40/50/54
40/50/54
40/50/54
40/50/54
40/50/54
40/50/54/60
40/50/54/60
40/50/54
40/50/54
40/50/54
40/50/54
40/50/54
40/50/54/60
40/50/54/60
Net weight
kg/kit
386
386
386
386
386
520
520
2710
3870
4570
5500
7250
8300
8300
160
185
220
230
325
515
515
359
359
359
359
359
480
480
2820
3750
4500
5950
8000
9360
9360
100
105
110
120
135
290
290
96
We reserve the right to alter the design and range of our products.
ABB Kabeldon
2006 Edition 1
30
GAP-APEC
Rod gap.
Inclination up to 30.
OPTO 1
Optofibre kit for cables with
integrated optical fibres in the
earth screen.
To be ordered separately:
Designation
Description
Use
GAP-APEC
Rod gap
97
OPTO 1
Optofibre kit
97
JSA
Earthing kit
SCK
Screen connection
ABB Kabeldon
2006 Edition 1
We reserve the right to alter the design and range of our products.
See page
119
119
97