Professional Documents
Culture Documents
Year: 1st
Practical: 1
Practical: 54
Objectives:
To enhance the knowledge of Inorganic and Analytical chemistry and their reaction with
process industry.
Course Outline:
Periodic classification of elements on the basis of the structure of atoms; Periodic properties,
Solutions; Solubility; Raoult's law; Azeotropic solution; Vapour pressure and distillation of
partially miscible and immiscible liquids; Solubility Products, Colligative Properties and
determination of the molecular weight; Free Energy and equilibrium; Chemical Equilibrium;
Surface Phenomena and Catalysis; Electrochemistry: Electrolysis, Electrolytic conductance;
Transport number; Ionic equilibria; Activity co-efficient; Redox potential; Galvanic Cells,
Acids and Bases; Potentiometric titrations; pH; Buffer solution; Acid-base indicators.
Lab Outline:
Practical are based on, Inorganic Preparations Qualitative analysis; Preparation of standard
solution by ion exchange chromatography; Trace amount determination by
spectrophotometer, Conductrometric titrations, Potentiometer titrations
Books Recommended:
1. Finar I. L., Organic Chemistry- The Fundamental Principles 1975, Vol-I, The English
Language Book Society and Longman Group Limited.
2. Glasstone S. Textbook of Physical Chemistry 1951, 2nd Ed. Macmillan and Co.
Limited.
3. Volhardt K. Peter C. Organic Chemistry W.H.Freeman and Company.
4. Maron Samuel H., Prutton Carl F. Principles of Physical Chemistry 4 th Ed. Machmillan
Publishing Co.
5. Younis, M. Organic Chemistry.
Res. No.
Page 1
Year: 1st
Practical: 0
Practical: 0
Objectives:
To develop understanding with the concepts of calculus and analytic geometry and the
applications of these concepts to the solution of engineering problems. Statistics applicable to
Engineering problems is also taught.
Course Outline:
Differentiation and its applications; Maclaurin and Taylor series; Maxima and Minima of
functions of single variable; Revision of elementary integration; Integration by substitution
and by parts; Definite integrals; Application of Integrals; Area under the curve; Length of
Arc; Mean and root mean square values and centroid; Area of surfaces and volumes of solids
of revolution; Theorem of Pappus and Guldinus; Algebra of matrices and determinants.
Solution of system of equations; Linear Transformations and Eigen value problems; Vectors;
Tensors and their simple applications; Motion along a straight line with uniform acceleration;
Motion along a curved path; Tangential and Normal components of acceleration; Simple
Harmonic motion. Projectile; Power, Momentum and conservation of momentum and energy;
Force balance on submerged bodies
Books Recommended:
1. George B. Thomas JR. Calculus & Analytical Geometry 1993, 9th Ed, Addison-Wesley
Publishing Co.
2. Kreyszig Erwin. Advanced Engineering Mathematics 18993, 7th Ed. John Willey &
Sons.
Res. No.
Page 2
Year: 1st
Theory: 0
Practical: 1
Theory: 0
Practical: 54
Objectives:
To enable the students to meet their real life communication needs.
Lab Outline:
Introduction to Communication Skills (the process and principles of communication;
Importance of good communication skills in business / technical environment; Internal
communication in an organization; Challenge of the communication in the global market)
Study Skills, Components of the communication; Non-verbal communications, Functional
English; Assessment Week; Public Speaking (difference between the reading and writing,
reading text of good public speeches and the analysis of their components, listening to the
famous public speeches and exercise in public speaking), Formal Presentation (Modes of the
formal presentations, purpose of oral presentations, mechanics of the presentations, written
communication)
Books Recommended:
1. Practical English Grammar by A. J. Thomson and A. V. Martinet. Exercises 1. Third
edition. Oxford University Press. 1997. ISBN 0194313492
2. Practical English Grammar by A. J. Thomson and A. V. Martinet. Exercises 2. Third
edition. Oxford University Press. 1997. ISBN 0194313506
3. Writing. Intermediate by Marie-Christine Boutin, Suzanne Brinand and Francoise Grellet.
Oxford Supplementary Skills. Fourth Impression 1993. ISBN 0 19 435405 7 Pages 20-27
and 35-41.
4. Reading. Upper Intermediate. Brain Tomlinson and Rod Ellis. Oxford Supplementary
Skills. Third Impression 1992. ISBN 0 19 453402 2.
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 3
Year: 1st
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To give working knowledge & skills of coding (C++ syntax.), how to avoid common coding
pitfalls, to use and create own functions and classes. The course will enable students
recognize the advantages of using pointers and references & to understand the fundamental
ideas of object oriented (OO) design.
Course Outline:
Introduction to Computers: Logging in proper usage, access and security; Use of keyboard
and mouse; General feature and operation of graphic user interfaces; Menus and windows
operations; Use of online help and tutorials. General Operations: File and directories naming,
handling and good practice; Copying, cutting and pasting; operating systems in practices.
Word Processors: Document creation and editing; Formatting, layout, use of fonts; Spell
checking. Extensive hands on practice on computing machines.
Spreadsheets: Data, formulae, label input and management; Layout and good practice.
Graphics: Basic use of graph making and drawing packages; Creation and presentation of
different types. Comprehensive designing and auto-calculation of spread sheet, data sorting
and graphic display of data, development of D.B.M.S.
Integration: Cutting and pasting via clipboard and by direct import from compatible software
to create composite documents.
Network Operations: Use of printer servers and drivers; Electronic mail for receiving and
submitting assignments
Lab Outline:
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 4
In the laboratory, the student will be familiarized with: basic use of flow charts, introduction
to office tools including spreadsheet, word processing and presentation, overview of different
browsers and different microsofts.
Books Recommended:
1. Norton, P. Computing Fundamentals Sixth Edition, McGraw Hill Publishers, 2006.
2. Davis, G. H., How to Do Everything with Microsoft Office Excel 2003, McGraw-Hill
Book Co., Osborne, 2003.
3. Nelson, S.L., Kelley, J., Office XP: The Complete Reference, McGraw Hill Publishers,
2001.
Res. No.
Page 5
Year: 1st
Theory: 0
Practical: 1
Theory: 0
Practical: 54
Objectives:
To provide an understanding of fundamentals of engineering drawing.
Lab Outline:
Introduction and importance of drawing in engineering; Use of instruments; Planning of a
drawing sheet; The projection of simple solids in simple positions; The oblique and auxiliary
plans; Lettering; Dimensioning; The principal requirements of a working drawing; Isometric
and pictorial projection of solid figures, Making of free-hand sketches from solid object and
from orthographic projections; Sections of solid; Tangent planes to surfaces in contact, Intersection of surfaces and inter-penetration of solids; Development of surfaces; Screw thread
systems; Key and cotters; Couplings and simple bearings; Preparation of detailed and few
assembly drawing.
Books Recommended:
1. Parkinson, A. C. A First Year Engineering Drawing 1958, Sir Isaac Pitman & Sons.
2. Engineering Drawing and Graphic Technology 14thEdition by T.E. French, C.J. Vierk and
R.J. Foster
3. Elementary Engineering Drawing by N.D. Bhatt
Res. No.
Page 6
Year: 1st
Practical: 1
Practical: 54
Objectives:
To provide understanding of the fundamentals of particle technology with the emphasis on
applications and practical problems in chemical and process industries.
Course Outline:
Importance of Particle Technology in Chemical/Process Industries; Characterization of the
Particles; Detailed study of the following unit operations; Screening, , mixing, size reduction
crystallization, filtration, and sedimentation; Different types of screening equipment, , mixers,
centrifuges, filters ,size reduction equipment and crystallizers, with emphasis on the
followings; mechanical construction, operation and the working principle, design and the
controlling parameters, efficiency, economic evaluation, applications and the selection
criteria. Role of different mechanical separation techniques in Chemical /Process Industry.
Lab Outline:
Energy calculations for ball mill, Jaw crusher, Hammer mill, Pebble mill, ultrafine grinders,
smooth roll crushers, Sieve analysis. Determine the rate of mixing of granular solids by
kneader mixer and separation efficiency of cyclone separator
Books Recommended:
1. Richardson, J. F., Harker, J. H. and Buckhurst, J. R. Coulson & Richardson's Chemical
Engineering, Vol. 2, 5th Ed., Butter Worth Heinemann, 2002.
2. McCabe, L. W., Smith, J.C. and Harriot, P., Unit Operations of Chemical Engineering,
7th Ed., McGraw-Hill Book Co. New York, 2005.
Res. No.
Page 7
Year: 1st
Theory: 0
Practical: 1
Theory: 0
Practical: 54
Objectives:
To enable the students to understands the applications of mechanics.
Lab Outline:
Experimental work related to the following core areas of mechanics; Inertia and moment of
inertia analysis of flywheel; Determination of coefficient of friction for different systems;
Basiler suspension; mechanics of Weston differential pulley; Performance evaluation of Tie
and Jib and forces analysis; Mechanical advantages in mechanical and applications;
Estimation of efficiency losses for various systems and study of techniques to improve
efficiency.
Books Recommended:
1. JL Meriam and LG Kraige, Engineering Mechanics: Statics
2. JL Meriam and LG Kraige. Engineering Mechanics: Dynamics
Res. No.
Page 8
Year: 1st
GPA
Credit hours:
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
To develop understanding of basic calculations involved in chemical engineering.
Course Outline:
Units and dimensions, conversion of units, dimensional analysis; Stoichiometric and
composition relations; Concepts of an ideal gas; Study of non-ideal behavior of gases and
related calculations; Vapor pressure saturation and humidity as applied to material balance
calculations. Introduction to material and energy balance computations.
Books Recommended:
1.
Res. No.
Page 9
Year: 1st
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
The objective of this subject is to provide knowledge about physics
theorems and principles with the emphasis on engineering.
Course Outline:
Thermometry; Heat transfer; Heat insulation; Properties of materials for use in buildings,
Geometrical optics; The focal length of a spherical surface; The focal length of a lens;
Magnification; Compound lenses; Resolving power. Laws of illumination and photometry;
Sextant Spectrometer, Principles of refracting telescopes, Polarization of light; Waves and
oscillation; Sound waves; Resultant of two simple harmonic motions; Resonance and beats.
Acoustics and its application in design of flats, Interference: Wavelength and frequency; units
and measurement of intensity, Reflection and refraction of sound; Reverberation time.
Magnetic effect of current; C.G.S. and practical units; Relation between magnetism and
electricity; Magnetic Field due to current in a long wire; Force on a current carrying
conductor in magnetic field ; Laws of electromagnetic induction ; Galvanometer, Ammeter ;
Voltmeter ; Avometer ; Condensers and dielectrics ; Magnetic Materials ; BH curves,
Hysteresis ; Magnetic circuit Calculations ; Solenoids, Pull of an electromagnet ; Principles
of diode and triode ; Cathode-ray tube and photo-multiplier tube. Atomic and Nuclear
physics: Atomic structure; Nuclear Structure; Radioactivity; Nuclear Theory, Fission and
Fusion.
Lab Outline:
Power supply, Solenoid, 6ES Tube for experiment of charge to mass ratio; Photo cell for
Photo Electric Effect; Tangent Galvanometer; Spectrometer; Bread Boards, Multimeters,
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 10
Diodes, Power Supply; Morse key, Two-Way key, Potentiometer, Power Supply, Capacitors;
Triode Characteristics Apparatus; Ionization Potential of Mercury.
Books Recommended:
1. Physics for Scientists and Engineers, by Douglas C. Giancoli, 4 th Edition, Prentice Hall,
2009.
Res. No.
Page 11
Year: 1st
GPA
Credit hours:
Theory: 0
Practical: 1
Theory: 0
Practical: 54
Objectives:
To develop practical skills in the use of workshop tools and equipment.
Lab Outline:
Workshop practice to learn basic workshop techniques and operations, Elementary Machines
Shop: Detailed study of Centre Lathe and accessories; Plain and Taper turning, Simple Screw
Cutting; Introduction to the Shaper, Slotter, Planner, Pillar and Radial Drilling Machines.
Fitting Shop: The use and care of fitters tools; Laying out and marking of jobs, Practice in
filing, sawing, drilling, dicing, tapping and reaming of holes in metallic jobs; Familiarizing
with the working of Arbor Press and Power Hacksaw.
Electric Shop: Study of tools, materials and accessories used in wiring practice; Cables, their
sizes, types and current ratings. Switch gear used on domestic installations. Types of Wiring
systems and use of Distribution Boards.Earthing, its necessity and methods of installation of
earth electrodes. Use of magger testing set. Evolution of neutral in a distribution system.
Smith Shop: The use and care of Smithy tools. Study and use of open hearth forge. Practice in
upsetting, drawing out, spreading, bending, cutting and punching. Hardening and tempering
of small cutting and punching of small cutting tools; Soldering; brazing; Electric, gas and
forge welding.
Carpentry Shop: The use and care of carpentry tools. Timber: its defects and preservation
methods; Practice in planning and sawing; Study of joints.
Books Recommended:
1) Workshop Technology, W.A.J. Chapman, 4th Edition, Elsevier Butter-worthHeinemann,
1972.
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 12
Year: 1st
GPA
Credit hours:
Theory: 2
Practical: 0
Theory: 36
Practical: 0
Objectives:
To familiarize the students with material properties and their applications.
Course Outline:
Significance of materials in engineering equipment designs and fabrication; Fundamental
concept of stress & strain their estimation and applications; Chemical Engineering Design;
Mechanical & thermal properties & the applications of the following materials of
construction; Iron & steel, stainless steel, Nickel, Hastelloy, Copper alloys, Aluminium & its
alloys, Lead, titanium & tantalum; Phase equilibrium diagrams of stainless steel; Polymeric
materials; Composite materials; Glass, Stoneware, Acid-resistant bricks & tiles; Selection of
materials of construction; Introduction to corrosion and its types.
Books Recommended:
1. Fisher, L.W., Selection of Engineering Materials and adhesives, Taylor and Francis
Group, 2005.
2. John, V., Introduction to Engineering Materials, 4th Ed., Pal Grave Macmillan, 2003.
3. Callister, W.D., Material Science and Engineering- An Introduction, 7th Ed., John
Wiley & Sons, 2007.
Res. No.
Page 13
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To provide an understanding of processes of different chemical and process industries
Course Outline:
Introduction to process flow sheeting, Process flow diagrams, standard symbols; Detailed
study of the following group of industries (i) Water treatment; Silicate industries (Cement,
Glass and Ceramics); (ii) Agro- based industries(Pulp and Paper, Soap and Detergent, Oil and
Ghee, Sugar); (iii) Acid industries( Hydrochloric acid, Sulphuric acid, Nitric acid and
Phosphoric acid); (iv) Alkali industries ( Soda Ash, Caustic Soda and Ammonia) Fertilizer
(NPK based fertilizers); Classified chemicals (Insecticides; Explosives and Surface coating
industries). (v) Petro-chemicals)
Lab Outline:
Preparation of soap, Leather analysis, Milk analysis, Fermentation, Preparation of
nitrobenzene, Aspirin, Acetic acid and Oxalic acid.
Books Recommended:
1. Austin G.T., Shreve's Chemical Process Industries . 5th Ed., McGraw-Hill Book Co.
Inc., 1984
2. Speight, J. G., Chemical Process and Design Handbook, McGraw-Hill Book Co. Inc.,
2002.
Res. No.
Page 14
GPA
Credit hours:
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
Develop vision of historical perspective, government, politics, contemporary Pakistan,
ideological background of Pakistan..Study the process of governance, national development,
issues arising in the modern age and posing challenges to Pakistan.
Course Outline:
Part-I: Quran and Sunnah; Al-Quran al-karim; Al hadith al sharif, Den-e-Islam, the study of
cardinals articles of faith; SerahtunNabi; Islam and modern science; Ethics
Part-II: Ideology of Pakistan; A brief history of Muslim society in subcontinent; Historical
back ground of the Ideology of Pakistan national & reformative movements; Hazrat Sheikh
Mujaddad Alf-I-Sani; Educational efforts; Pakistan movement.
Books Recommended:
1) Pakistan Studies by Muhammad Ikram Rabbani, Urdu Bazar publishers, 2005
Res. No.
Page 15
Year: 2nd
GPA
Credit hours:
Minimum contact hours:
Theory: 3
Theory: 54
Practical: 1
Practical: 54
Objectives:
The objective of the course is to impart the basic knowledge of electrical and electronics that
is generally part of process industry.
Course Outline:
Basic concepts; electrical quantities and units, basic circuits, laws, Circuit components,
Multiple load circuits, Complex Circuit Analysis; Magnetism and electromagnetism;
Alternating current voltages, power in AC circuits, Capacitance, Inductance, Transformer,
R.C and L circuits, Electric Motors, Instruments and measurements, Residential Wiring
Concepts.
Lab Outline:
Introduction and use of Electrical tools, Electrical materials, To learn and make T-joint &
Straight joint, To study and implement staircase wiring using two way switches, To study old
and new house wiring schemes, To study and observe working of fluorescent tube light with
and without starter, To find the light wavelength of sodium vapor lamp, To study
commutation process, DC motor & generator working, To learn PCB Designing and to design
a sample circuit on a PCB SHEET, To study repairing of home appliances such as Heater,
Electric iron and fans etc., To study and make transformer winding, To prepare layout on a
metal sheet by marking and prepare rectangular tray, To mark punch and drill holes on a
metal sheet, To prepare Joints for butt- welding and lap welding.
Books Recommended:
1) Workshop Technology, W.A.J. Chapman, 4th Edition, Elsevier Butter-worth
Heinemann, 1972.
2) Electrical Workshop: A Textbook, by R.P. Sing, 2nd Edition, International Publishing
House, 2008.
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 16
GPA
Credit hours:
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
To familiarize students with the concept of thermodynamic, heat and its application in
chemical engineering
Course Outline:
Scope of thermodynamics; Fundamental Quantities, terminologies and related parameters;
First law of thermodynamics and its applications to chemical engineering processes; PVT
behavior of pure fluids; Equations of state; Heat effects; Concept of entropy and second law
of thermodynamics; Thermodynamic properties of fluids; Generalized correlation for gases;
Thermodynamics of flow processes.
Books Recommended:
1. Smith, J. M., Van Ness, H.C., Abbot, M. M., Chemical Engineering Thermodynamics",
7th Ed., McGraw-Hill Book Co. New York. 2010.
2. Cengel.Y.A., Bole.M.A. Thermodynamics An
Engineering approach, 5th Ed.,
McGraw Hill, 2006.
3. Eastop,T.D.,McConkey.A., Applied Thermodynamics, 5th Ed., Pearson Education Ltd.
Res. No.
Page 17
Year: 2nd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To apply knowledge of organic chemistry for unit processes in organic synthesis. To
introduce students to Biochemistry.
Course Outline:
Organic chemistry: Introduction to chemical bondings; Resonance and its applications;
Mechanism; Methods of determining; Tautorism; Functional Groups; Addition to carboncarbon and carbon oxygen double bond; Substitution and Elimination reactions; Aromatic
Compounds; inter conversion of functional groups; Organic nitrogen compounds and
heterocyclic systems; Introduction to bio-chemistry: Chemistry of bi molecules, Enzymes;
Bio-energetic; Bio-chemical techniques; Bio-chemical technology.
Lab Outline:
Practicals to be based on: Determination of optimum conditions for any unit process;
Preparation of ethers on Semi-batch process. Preparation of organic compounds.
Books Recommended:
1. Shreve's Chemical Process Industries, G.T. Austen, McGraw Hill 1995.
2. Riegels Handbook of Industrial Chemistry, James A. Kent 10th Ed. Springer/Van
Nostrard Reinhold, 2003.
Res. No.
Page 18
Year: 2nd
GPA
Credit hours:
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
To familiarize students with the concept of fluid and particle mechanics
Course Outline:
Introduction and importance of fluid mechanics; Description of fluids; Types of fluids and
classification of fluid flows; Compressible vs. Incompressible fluids, Steady and unsteady
fluid flows; Properties of fluids; Basic equation of fluid flow; Flow of incompressible fluids
in pipes, laminar and turbulent flowing closed channels; Processes of compressible fluid
flows; Flow through variable area conduits; Boundry layer concept, Prandtls Boundary
layer equations, Turbulent boundary layer; Dimensional analysis.
Books Recommended:
1. McCabe, L. W., Smith, J.C. and Harriot, P., Unit Operations of Chemical Engineering,
7th Ed., McGraw-Hill Book Co. Inc., 2005.
2. Richardson, J. F., Harker, J. H. and Buckhurst, J. R., Coulson & Richardson's Chemical
Engineering, Vol. 1, 6th Ed., Elsevier, 2005.
3. Fox, R. W., Mc Donald, A.T. and Pritchard, P.J., Introduction to Fluid Mechanics, John
Willey & Sons. 2004.
Res. No.
Page 19
Year: 2nd
GPA
Credit hours:
Theory: 0
Practical: 1
Theory: 0
Practical: 54
Objectives:
The objective of this subject is to develop communication skills in
researching, writing essays, reports and short business documents,
working cooperatively in teams, and presenting group projects. It also
provides an overview of communication theory and an insight into the
processes of professional communication.
Lab Outline:
Introduction, written communication, correctness of language, business correspondence
(memorandums, minutes of a meeting, emails, resume and cover letter writing, application
and follow up letters, business letters, analysis of sample letters), interview skills, assessment
week, phonetics and phonology, vocabulary building, written reports, presentations, seminars.
Books Recommended:
1. Business Communication: Making Connections in a Digital World, by
Lesikar, 12th Edition, McGraw Hill, 2010.
Res. No.
Page 20
Theory: 100
Practical: 0
Credit hours:
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
To familiarize the students with the basic concepts of Halal and Haram,
rights of Muslims & non-Muslims and rights of woman in Islam. Detailed
knowledge about five pillars of Islam and Seerat (Life of Prophet (SAW)).
This subject also provides knowledge about ideology of Pakistan and role
of different personalities in Pakistan Movement.
Course Outline:
Part-I: Al-Quran al-karim; Al-hadith al-sharif; Den-I-Islam; Serahtu Nabi; Ethics
Part-II: Formation of Pakistan; The land of Pakistan; Efforts for execution of Islamic
system in Pakistan; Foreign policy of Pakistan
Books Recommended:
1. Pakistan Studies by Muhammad Ikram Rabbani, Urdu Bazar publishers, 2005.
Res. No.
Page 21
Year: 2nd
GPA
Credit hours:
Theory: 4
Practical: 0
Theory: 72
Practical: 0
Objectives:
To focus use and application of differential equations in the areas relevant to process.
Course Outline:
Differentiation and its applications; Maclaurin and Taylor series; Maxima and Minima of
functions of single variable; Revision of elementary integration; Integration by substitution
and by parts; Definite integrals; Application of Integrals; Area under the curve; Length of
Arc; Mean and root mean square values and centroid; Area of surfaces and volumes of solids
of revolution; Theorem of Pappus and Guldinus; Algebra of matrices and determinants.
Solution of system of equations; Linear Transformations and Eigen value problems; Vectors;
Tensors and their simple applications; Motion along a straight line with uniform acceleration;
Motion along a curved path; Tangential and Normal components of acceleration; Simple
Harmonic motion. Projectile; Power, Momentum and conservation of momentum and energy;
Force balance on submerged bodies
Books Recommended:
1. Edwards, C., and D. Penney. Elementary Differential Equations with Boundary Value
Problems. 6th ed. Upper Saddle River, NJ: Prentice Hall, 2003.
2. Erwin Kreyszig, Advanced Engineering Mathematics, John Wiley, 2006
Res. No.
Page 22
Year: 2nd
GPA
Credit hours:
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
In depth study of calculation in chemical engineering involving both mass balance and energy
balance for design and operation applications
Course Outline:
Material balances involving multiple reactions and multiple units ; Material balances
involving recycle, by-pass and purge streams, Material balances involving phase change,
General energy balance with and without chemical reactions; combined material and energy
balance in chemical/ process industries.
Books Recommended:
1. Himmelblau, D. M., Basic Principles and Calculations in Chemical Engineering, 7 th
Ed., McGraw-Hill Book Co. New York, 2009.
2. Felder, R. M. and Rousseau, R. W., Elementary Principles of Chemical Processes, 3 rd
Ed., John Wiley & Sons Inc., 2001.
3. Hougen, O. A., Watson, K. M. and Ragatz, R. A., Chemical Process Principles, 2 nd Ed.,
John Wiley & Sons Inc., 1954.
Res. No.
Page 23
Year: 2nd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To understand the various industrial processes and its application.
Course Outline:
Industrial Application of the following unit Processes with emphasis on their kinetic
behavior and economic importance: Nitration; Esterification; Amination; Halogenations;
Sulfonation; Oxidation and Hydrogenation. Introduction to biochemical Engineering
Processes.
Lab Outline:
Preparation of Bakelite from Phenol and Formaldehyde; Ethyl Acetate from Acetic acid and
Ethyl alcohol; Sodium Sulphate from Sodium chloride and Sulphuric acid;Production of
Picric acid by Phenol, Sulphuric acid and Nitric acid; Nitro Benzene from Nitric acid and
Benzene;Oxalic acid from Nitric acid and Sugar; Glacial Acetic Acid from Sulfuric acid,
Methanol & water ; Oxalic acid from Nitric acid and Sugar
Books Recommended:
1. Groggins, P. H., Unit Processes in Organic Synthesis, 5th Ed., McGraw-Hill Book Co.
Inc., 1995.
2. Smiths, J.M., Chemical Engineering Kinetics, 3rd Ed., McGraw-Hill Book Co. Inc.,
1990.
3. Speight, J. G., Chemical Process and Design Handbook, McGraw-Hill Book Co. Inc.,
2002.
Res. No.
Page 24
Year: 2nd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To develop understanding of applying governing equations of mass, momentum
and energy to simulate chemical engineering processes.
Course Outline:
Introduction to fluid dynamics; Transportation of fluids; Selection, Design procedure and
cost for storage tank, pipes, fittings and valves; Selection of pipes, pumps, Fans, Blowers,
Compressor, Turbines and expanders; Design procedure and costs; Metering of fluids;
Agitation and mixing of fluids; Static fluid phenomena in static mixers; Dynamic mixers;
Flow passed immersed bodies; Fluidization; Chemical Engineering computational fluid
Dynamics; Cavitation prevention of pumps; Chocking prevention of pipes; Corrosion
prevention; Surging in compressors.
Lab Outline:
To verify the characteristics curves of centrifugal pump using the computer controlled
centrifugal pump bench. To study the single, series, parallel pump operation with variable
flow rate.To study the Fluidization characteristics in sand-air system. To study the
Fluidization characteristics in water-air system. To study the behavior of a fan ay different
outlet flow rates.To determine he input voltage by running empty equipments& draw a graph
between calculated power & input power. To determine the air flow using inlet nozzle
dimensions & pressure changes.Measure the velocity profile by Pilot static tube. To find air
flow using Pitot tube &comparison with the results from nozzle. To measure the duct
resistance, fan characteristics & their effect on flowrate.To prove fan law for a fan. To draw
curves of head against flow efficiency & specific speeds for fans. To determine the velocity
of air w.r.t. different positions & to measure mach number.
Books Recommended:
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 25
1. McCabe, L. W., Smith, J.C. and Harriot, P., Unit Operations of Chemical Engineering,
7th Ed., McGraw-Hill Book Co. New York, 2005.
2. Richardson, J. F., Harker, J. H. and Buckhurst, J. R., Coulson & Richardson's Chemical
Engineering, Vol. 1, 6th Ed., Elsevier, 2005.
3. Abulencia, P. J., Theodore, L., Fluid Flow For The Practicing Chemical Engineer, John
Wiley & Sons, Inc., New Jersey, 2009.
4. Volk, M., Pump Characteristics and Applications, 2nd Ed., Taylor and Francis Group,
LLC., 2005.
Res. No.
Page 26
Year: 2nd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
The objective of this course is to equip the students with the basic
knowledge and skills of engineering drawing and its application in
practical scenarios.
Course Outline:
Introduction to energy, types of energy and sources of energy,
Introduction to Fuels in solid, liquid and gaseous state. Renewable and
non-renewable energy resources: Introduction of hydropower, solar
energy, wind energy, tidal energy, geothermal, nuclear energy, fossil
fuels, Extraction, advantages and limitations of each energy resource,
Availability of these energy resources in Pakistan, Environmental impacts
of energy resources. Fuel processing: Carbonization, Combustion,
Gasification, Fuel up-gradation, Energy from biomass.
Lab Outline:
To determine the Aniline point & Diesel Index of the given sample of oil. To
determine the softening point of the given sample of coal tar using
softening point apparatus. To determine the viscosity of the given fuel oil
using the Engler viscometer.To determine the vapor pressure of the given
sample of fuel oil using the Reid vapor pressure apparatus.To determine
the smoke point of the given sample of oil.To determine the cloud point of
the given sample of oil.To determine the Pour point of the given sample of
oil.To determine the moisture content in the given sample of coal.To find
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 27
out the %age Ash content in the given sample of coal.To find out the %age
volatile component in the given sample of coal.
Books Recommended:
1. Gupta, O. P., Elements of Fuels, Furnaces and Refractories, Khana
Publishers, 2006.
2. Harker, J. H., Buckhurst, J. R., Fuel and Energy, Academic Press, 1981.
3. Sorensen, B., Renewable Energy, 3rd Ed., Academic Press, 2004.
Res. No.
Page 28
Year: 3rd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To enable students using structured programming techniques in suitable programming
languages and implement numerical solutions using MATLAB.
Course Outline:
Introduction to computer set up; Basic Principles of digital computer programming; Program
structure and flow charts; Introduction to machine codes and compilers; Introduction to
Fortran language; Methods for analysis of simple elementary problems and preparation of
computer program; A review of basic Fortran concepts and exercises. Introduction to
numerical analysis; Finite differences; Difference Operators and Tables; Differences of
polynomials; Newton's and Gauss's interpolating techniques for equally spaced data; Simple
theorems on divided differences; Newton's formula for unequal intervals; Lagrange's formula
of interpolation. Numerical differentiation and numerical integration; Difference equations;
Numerical solution of system of linear equations; Numerical solution of ordinary
differential equations; Runge Kutta's and Picard's Method.
Lab Outline:
Practice and uses of different methods that are involve in calculations of different processes.
Books Recommended:
1. Zhilin Li, Lubin & Vulkov, Jerzy Wasniewski, Numerical analysis and its applications,
Springer, 2005, ISBN 3540249370.
2. Michelle Schatzman, Numerical Analysis Oxford University Press, 2002, ISBN
0198508522.
3. Steven T. Karris, Numerical Analysis Orchard Publications, 2004, ISBN 0974423912.
Res. No.
Page 29
Year: 3rd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To apply the knowledge of chemistry, thermodynamics and chemical engineering
for designing of reactors.
Course Outline:
Fundamentals of Chemical Reaction Engineering and its importance: Rate of reaction; Rate
equation; Molecularity and order of reaction; Kinetic models and mechanism for nonelementary reactions, Analysis of Rate Data: Integral and differential methods of analysis for
single irreversible / reversible reactions for constant and variable volume reactors, Ideal
Reactors, for Single Reactions: Design / performance equations for homogenous batch and
flow reactors; Holding time and space-time for flow reactors; Comparison of reactors,
Multiple Reactors System: Reactors of equal and different sizes used in series/parallel;
Determining best set up for given conversion. Recycle reactors, Auto catalytic reactions.
Lab Outline:
To standardize the conductivity meter with standard solution of Sodium hydroxide & draw
the curve to show the relationship between conductivity & concentration. (Method A). To
standardize the conductivity meter with standard solution of Sodium hydroxide & draw the
curve to show the relationship between conductivity & concentration. (Method B).To
calibrate the feed pump used for Sodium hydroxide & Ethyl Acetate tanks and draw the
calibration curve to show the relationship between various flow rates & speeds (regulator
positions).To investigate the reaction of Sodium hydroxide & Ethyl Acetate & study the
behavior of instantaneous conversion with time. Also find the overall conversion & draw
graph between concentration vs time.To study the effect of stoichiometric ratio of reactants
(Sodium hydroxide & Ethyl Acetate) on conversion & find out the optimum ratio of
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 30
reactants.To draw a graph between Conductivity & Concentration by using the Least square
method. (Best fit straight line). To draw a graph between Conductivity & Concentration by
using the Least square method. (Best fit parabolic curve).To study the kinetics ( n and
k ) for the given reaction between Sodium hydroxide & Ethyl Acetate Using Integral
Analysis.To study the kinetics ( n and k ) for the given reaction between Sodium
hydroxide & Ethyl Acetate Using Differential Analysis.To study the kinetics ( n and k )
for the given reaction between Sodium hydroxide & Ethyl Acetate Using Fractional Life
Method.To study the kinetics ( n and k ) for the given reaction between Sodium
hydroxide & Ethyl Acetate Using Empirical Rate Equation.To find Arhenous law parameters
(E &Ko) for the given reaction in lab. To study the rate constant for the given reaction
between Sodium hydroxide & Ethyl Acetate (Sponification reaction) Using Titration
method.To study the kinetics of the given reaction (Sodium hydroxide & Ethyl Acetate)
through the Conductometric method by finding Specific rate constant & Overall order of the
reaction.
Books Recommended:
1. Levenspiel, O., Chemical Reaction Engineering, 3rd Ed. John Wiley & Sons Inc., 2003.
2. Smith, J.M., Chemical Engineering Kinetics 3rd Ed., McGraw-Hill Book Co. New
York, 1981.
3. Fogler, H. S., Elements of Reaction Engineering, 3rd Ed., Prentice Hall India, 2005.
Res. No.
Page 31
Year: 3rd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To understand the various processes and its applications.
Course Outline:
Industrial application of the following unit processes with emphasis on their kinetic behavior
and economic importance: Nitration; Esterification; Amination; Halogenations; Sulphonation;
Oxidation and Hydrogenation, Introduction to biochemical engineering processes.
Lab Outline:
Preparation of Bakelite from Phenol and Formaldehyde; Ethyl Acetate from Acetic acid and
Ethyl alcohol; Sodium Sulphate from Sodium chloride and Sulphuric acid;Production of
Picric acid by Phenol, Sulphuric acid and Nitric acid; Nitro Benzene from Nitric acid and
Benzene;Oxalic acid from Nitric acid and Sugar; Glacial Acetic Acid from Sulfuric acid,
Methanol & water ; Oxalic acid from Nitric acid and Sugar
Books Recommended:
1. Groggins, P. H., Unit Processes in Organic Synthesis, 5th Ed., McGraw-Hill Book Co.
Inc., 1995.
2. Smiths, J.M., Chemical Engineering Kinetics, 3rd Ed., McGraw-Hill Book Co. Inc.,
1990.
3. Speight, J. G., Chemical Process and Design Handbook, McGraw-Hill Book Co. Inc.,
2002.
Res. No.
Page 32
Year: 3rd
GPA
Credit hours:
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To familiarize the students with mass transfer operations in chemical engineering
Course Outline:
Introduction to mass transfer and its applications; Mass conservation equations for single and
multi-component mixture Principles of diffusions transfer between phases; Ficks law,
Analogies with momentum and heat transfer; Steady state Diffusion in gases and liquids;
Transient diffusion; Mass transfer theories; Mass transfer coefficients through various
geometries and flow patterns; Equilibrium stage operations: Equipment for stage contacts,
Distillation: Flash distillation, Continuous distillation with reflux. Design of plate and packed
columns.
Lab Outline:
Leaching, liquid-liquid extraction, gas-liquid absorption, diffusion, crystallization, distillation
and ion exchange
Books Recommended:
1. Richardson, J. F., Harker, J. H. and Buckhurst, J. R. Coulson & Richardson's Chemical
Engineering, Vol. 2, 5th Ed., Butter Worth Heinemann, 2002.
2. McCabe, L. W., Smith, J.C. and Harriot, P., Unit Operations of Chemical Engineering,
7th Ed., McGraw-Hill Book Co. Inc., 2005.
3. Treybal, R.E.,Mass Transfer Operations, 3rd Ed., McGraw Hill Book Co. Inc., 1981.
Res. No.
Page 33
Year: 3rd
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
To provide in-depth knowledge of mathematical methods.
Course Outline:
Application of the followings to the Chemical Engineering problems: Ordinary differential
equations; Simultaneous differential equations; Partial differential equations; Series Solution;
Laplace Transformations.
Books Recommended:
1. Sherwood, T. K., Reed, C. E. and Mickley, H. S., Applied Mathematics in Chemical
Engineering, 2nd Ed., McGraw-Hill Book Co. Inc., 1989.
2.
3.
Rice, R.G. and Do, D.D., Applied Mathematics and Modeling for Chemical Engineers,
John Wiley & Sons, 1995.
Jenson, V.G. and Jeffreys, G.V., Mathematical Methods in Chemical Engineering, 2 nd
Ed., Academic Press, 1997.
Res. No.
Page 34
Year: 3rd
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
To enable students to apply the knowledge in chemical engineering application.
Course Outline:
Power cycles, refrigeration and liquefaction; Concepts of equilibrium; Phase rule; Vapour
liquid equilibrium at low to moderate pressure; Simple models for vapour liquid
equilibrium and modified Raoults law; Vapour-liquid equilibrium from K- value
correlations; Solution thermodynamics: Fundamental property relation; Maxwell equations;
Chemical potential and phase equilibria; partial properties, ideal gas mixture, fugacity,
fugacity coefficient for pure species and for a species in solution; Generalized correlation for
fugacity coefficients; Ideal solutions: excess properties, liquid phase properties from vaporliquid equilibrium data, Models for excess Gibbs energy. Property changes of mixing, heat
effects of mixing process; Chemical reaction equilibrium; Chemical reaction equilibrium for
homogeneous and heterogeneous systems.
Lab Outline:
To calculate the COP of Refrigeration Unit, air conditioning unit (Both Heating and Cooling
Cycle) and heat pump; To calculate the efficiency of Compressor installed in refrigeration
unit, Air Conditioning Unit (Both Heating and Cooling Cycle) and Heat Pump; To draw P-V
& T-S diagram for Refrigeration cycle, Air Conditioning Unit and heat pump; To study the
two stroke and four engine on Two stroke and four stroke Models
Books Recommended:
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 35
1. Smith, J.M., Van Ness, H.C., Abbot, M.M., Chemical Engineering Thermodynamics ",
7th Ed., McGraw-Hill Book Co. Inc., 2010.
2. Cengel,Y.A., Bole,M.A. Thermodynamics An Engineering approach, 5th Ed., McGraw
Hill, 2006.
3. Winnick, J., Chemical Engineering Thermodynamics, John Willey & Sons. Inc., 2001.
Res. No.
Page 36
Year: 3rd
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
To equip the graduate engineers to identify the economically feasible process in the
engineering field.
Course Outline:
Importance of economics in engineering; Market and process surveys in relation to feasibility
analysis; Plant location; Estimation of capital investment; Physical-plant cost; Manufacturing
cost; General expenses: Interest, taxes, insurance, and depreciation; Sales and profit; Cost
accounting; Alternative investments and replacements :Marketing.
Books Recommended:
1. Peters, M.S. and Timmerhaus, K.D., Plant Design & Economics for Chemical
Engineers. 5th Ed., McGraw Hill Book Co. Inc., 1991.
2. Riggss J. L. David D. Bedworth., Engineering Economics4th Ed., McGraw Hill Book
Co. Inc., 2004.
3. James R. Couper., Process Engineering Economics. 4th Ed., Marcel Dekker Inc. New
York, 2003.
Res. No.
Page 37
Year: 3rd
Theory: 3
Practical: 1
Theory: 54
Practical: 0
Objectives:
To give and overview of different energies, ossil fuels. Students should be able to understand
the significance of combustion in process industry. After this course, student should be able to
design industrial furnaces and boilers. He should also be able to develop techniques and
technologies to comply with emission legislation in this regard..
Course Outline:
Introduction to energy, types of energy and sources of energy, Introduction to Fuels in solid,
liquid and gaseous state. Renewable and non-renewable energy resources: Introduction of
hydropower, solar energy, wind energy, tidal energy, geothermal, nuclear energy, fossil fuels,
Extraction, advantages and limitations of each energy resource, Availability of these energy
resources in Pakistan, Environmental impacts of energy resources. Fuel processing:
Carbonization, Combustion, Gasification, Fuel up-gradation, Energy from biomass.
Lab Outline:
To determine the Aniline point & Diesel Index of the given sample of oil, the softening point
of the given sample of coal tar using softening point apparatus, the viscosity of the given fuel
oil using the Engler viscometer, the vapor pressure of the given sample of fuel oil using the
Reid vapor pressure apparatus, the smoke point of the given sample of oil; the cloud point of
the given sample of oil; the Pour point of the given sample of oil; the moisture content in the
given sample of coal, the %age Ash content in the given sample of coal; the %age volatile
component in the given sample of coal; the Aniline point & Diesel Index of the given sample
of oil; the softening point of the given sample of coal tar using softening point apparatus; the
viscosity of the given fuel oil using the Engler viscometer; the vapor pressure of the given
sample of fuel oil using the Reid vapor pressure apparatus; the smoke point of the given
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 38
sample of oil; the cloud point of the given sample of oil; the Pour point of the given sample
of oil, the moisture content in the given sample of coal, the %age Ash content in the given
sample of coal and the %age volatile component in the given sample of coal.
Books Recommended:
1. Gupta, O. P., Elements of Fuels, Furnaces and Refractories, Khana Publishers, 2006.
2. Harker, J. H., Buckhurst, J. R., Fuel and Energy, Academic Press, 1981.
3. Sorensen, B., Renewable Energy, 3rd Ed., Academic Press, 2004.
Res. No.
Page 39
Year: 3rd
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
Plant life depends on its proper maintenance and up keep safety is very essential for any
productive unit and it is said that safety and productivity go in hand and hand. The subject
prepare the students for above mentioned aims.
Course Outline:
Types of maintenance and their applications; Maintenance Management; Maintenance of
pumps, Machines and Piping, Lubrication programs, Forms of corrosion, prevention and
inhibition, Design considerations; Layout and construction; Overall safety of plant and
personnel; fire and explosion; Health hazards; Accident prevention; Government Regulations
for industrial safety.
Books Recommended:
1. Higgins, L. R. and Mobley, R. K., Maintenance Engineering Handbook, 6th Ed.,
McGraw-Hill Book Co., New York, 2001.
2. Dhillon, B. S., Engineering Maintenance: A Modern Approach, CRC Press, 2002.
Res. No.
Page 40
Year: 4th
Theory: 3
Practical: 1
Practical: 54
Objectives:
To familiarize the students with process parameter measurements and their instruments,
various control strategies and response analysis.
Course Outline:
Introduction & significance of control; Feedback& feed forward control; Design & Hardware
elements of control; Dynamics of first & second order systems; Overall transfer function
testability; Controllers (P, PI, PID etc) & final control elements; Representation of control
systems; Multiple control loops; cascade, ratio, over-riding etc. Introduction to stability of
chemical processes; introduction to frequency response techniques; Routh's criteria, Bode
plots, Nyquist method; Computer control, Introduction to Distributed Control Systems; Case
study: Development of control scheme of complete plant.
Lab Outline:
Study the K & J type thermocouples, Study of control loops, Process plant training.
Books Recommended:
1. Stephanopoulos, G.., Chemical Process Control, Pearson Prentice Hall, 2006.
2. Smith C.A., Corripio A.B Principles and Practice of automatic Process Control 3rd Ed,
John Wiley and Sons, 2006.
3. Luyben, W.L., Process modeling, Simulation and Control for Chemical Engineers, 2nd
edition, McGraw-Hill Book Co. Inc.,1996.
Res. No.
Page 41
Year: 4th
Theory: 4
Practical: 0
Theory: 72
Practical: 0
Objectives:
To develop understanding of simultaneous heat and mass transfer operations.
Course Outline:
Multi-component distillation, Azeotropic and extractive distillation, Equipment evaluation
and design; Drying mechanisms; Humidification & Dehumidification and equipment design;
Fixed-bed operations : Adsorption and Ion Exchange.
Books Recommended:
1. McCabe, L. W., Smith, J.C. and Harriot, P., Unit Operations of Chemical Engineering,
7th Ed., McGraw-Hill Book Co. New York, 2005.
2. Dutta B.K., Principles of Mass Transfer and Separation Processes. PHI Private
learning , New Delhi, 2009.
3. Richardson, J. F., Harker, J. H. and Buckhurst, J. R. Coulson & Richardson's Chemical
Engineering, Vol. 2, 5th Ed., Butter Worth Heinemann, 2002.
Res. No.
Page 42
Year: 4th
Theory: 3
Practical: 1
Theory: 54
Practical: 54
Objectives:
This course will make capable the students to understand basic needs and
requirement of a plant design practices and techniques by using design
codes and standards.
Course Outline:
Introduction; Process design development; General design considerations;
Optimum design; Materials of fabrication and their selection; Material
transfer handling and equipment design; Heat transfer equipment design;
Mass transfer equipment design; Application of computer aided design of
software.
Lab Outline:
Practicals related to softwares, design of differents eqiupments and
process related to the dield.
Books Recommended:
1. Peters, S.M., Timmerhaus, K.D., and West, R.E., Plant Design
Economics for Chemical Engineers, 5th Edition, McGraw-Hill Book Co.
Inc., 2003.
2. Ludwig .E, Applied Process Design, 2nd Vol., 3rd Ed., Houston Texas,
2002.
3. Sinnott R.KChemical Engineering Design 4th Ed. Butterworth
Heinemann
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 43
Year: 4th
Theory: 0
Practical: 2
Theory: 0
Practical: 54
Objectives:
This course will make capable the students to understand basic needs and
requirement of a plant design practices and techniques by using design
codes and standards in industries.
Lab Outline:
Plant design project is the practical demonstration of students theoretical knowledge. In plant
design project groups of students are assigned a project which includes process selection,
capacity setting, overall material and energy balance, design of different units or equipments,
instrumentation and control, economic analysis of plant, hazard assessment & HAZOP study
etc. Students are required to present project in front of class and teaching faculty in a seminar
which helps to improve their interpersonal & communication skills.
Books Recommended:
All chemical engineering and other related books.
Res. No.
Page 44
Year: 4th
Theory: 3
Practical: 0
Theory: 54
Practical: 0
Objectives:
This enables the students to understand the organization and managing
its operations.
Course Outline:
Resources and management processes; Environment of engineering organization and
managers; Social, Ethical, Global and Multicultural environment; Elements of planning and
decision making; Decision making and their types; Managing strategy and strategic planning;
Elements of an organization. Organization design, change and innovation; Human resource
management; Managing motivation and performance; Managing work groups and teams;
Organizational communication and interpersonal relations in engineering organizations;
Types of control; Managing operation, quality and productivity of an engineering
organization.
Books Recommended:
1. Griffin, W., Management, 8th Ed., Houghton Mifflin Company, 2006.
2. Dhillon, B. S., Engineering Management: Concepts, Procedures, and Models,
Technomic Pub. Co., 1987.
Res. No.
Page 45
Year: 4th
Theory: 3
Practical: 0
Practical: 0
Objectives:
This course covers the laws related to engineering projects.
Course Outline:
Laws for environmental concerns/regulations and penalties, engineering projects bidding
and compliance requirement, rules, responsibilities and obligation. Understanding banking
and credit institution, legislation, labor loss, safely rules and regulations, certification,
procedure and opportunities. Government and company legislation, codes and conducts of
engineering projects.
Books Recommended:
1. Dhillon, B. S., Engineering Management: Concepts, Procedures, and Models,
Technomic Pub. Co., 1987.
2. Higgins, L. R. and Mobley, R. K., Maintenance Engineering Handbook, 6th Ed.,
McGraw-Hill Book Co., New York, 2001.
Res. No.
Page 46
Year: 4th
Theory: 3
Practical: 1
Practical: 54
Objectives:
The graduate will have knowledge in the area of environmental engineering that includes
types of pollution, sampling, monitoring, pollution control considering the international and
national standards.
Course Outline:
Introduction to ecology of environment; Impact of technology on ecology of system; The
effects of industrial pollutants on human environments; Environmental impact assessment
and sustainable development; Air pollution and its control; Water pollution and its control;
Industrial waste water and its control; Industrial noise pollution and its control; Future
requirements of process industries and developments under the constraints of diminishing
world resources and ecological elements of human environment, EIA method and techniques
for impact prediction and evaluation
Lab Outline:
Study the operation of cyclone separator and determine the collection efficiency of given
cyclone separator.Measure of hardness of water by complex matrix method. Measure of
chlorides in water. Determination of total acidity in water. Determination of total alkalinity in
water. Measurement of dissolved oxygen in sample water.Measurement of chemical oxygen
demand in sample water. Measurement of biological oxygen demand in sample water.
Measurement of total solids in sewage. Measurement of total dissolved solids in sewage.
Measurement of total settable solids in sewage. Study the process of reverse osmosis for
water treatment. Study the coagulation, flocculation, decantation unit for the turbidity
clearance in water. Determination of velocity gradient of flocculation unit.
Books Recommended:
Approval: Board of Studies:
Dated: -----------
Res. No.
Page 47
Res. No.
Page 48
Year: 4th
Theory: 3
Practical: 0
Practical: 0
Objectives:
To familiarize the students with the concept of Transport Phenomena and its application in
the process industry.
Course Outline:
Viscosity and the mechanism of momentum transport; Velocity distribution in laminar flow;
The equations of change for isothermal systems; Velocity distribution with more than one
independent variable; Thermal conductivity and mechanism of energy transport;
Temperature distribution in solids and in laminar flow; The equations of change for non
isothermal systems; Diffusivity and the mechanism of mass transport; Concentration
distribution in solids and in laminar flow; The equations of change for multi-component
systems.
Books Recommended:
1. Bird, R. B., Lightfoot, E. N. and Stewart, W. E., Transport Phenomena, 2nd Ed., John
Wiley and Sons Inc., 2006.
2. Bennett, C.O. and Mayers, J.E, Momentum Heat and Mass Transfer, 3rd edition,
McGraw Hill Book Co. Inc., 1982.
3. Sissom, L.E. and Pitts, D.R., Elements of Transport Phenomena, McGraw Hill Book
Co. Inc., 1972.
4. Geankoplis, C.J.,Transport Processes- Momentum, Heat and Mass, Allyn and Bacon,
Inc., 1983
Res. No.
Page 49
Year: 4th
Theory: 3
Practical: 0
Practical: 0
Objectives:
To familiarize students with gas separation & techniques for production of natural gas or
LPG.
Course Outline:
Introduction to natural gas industry; Phase behavior of natural gas systems; Properties of
natural gas and volatile hydrocarbon liquids; Gas hydraulics; Compressor station; Pipe loops
vs Compression; Gas distribution network (analysis and simulation), Selected elements of
graph theory, formulation of equations for steady state analysis, numerical solution of
algebric equations, methods of steady state analysis; Gas purification by low temperature
processes; Sweetening and dehydration of crude gas; Corrosion protection of gas pipelines;
Pipeline economics.
Books Recommended:
1. Kidney, A, J., Parrish, W.R., Fundamentals of Natural Gas Processing, Taylor &
Francis Group, LLC, 2006.
2. Menon ,E.S., Gas Pipeline Hydraulics, 2nd Ed., Taylor and Francis, 2005.
3. Katz, Donald L., Cornel, D., Vary, John A., Kobayashi, R., Elenbass, J.R., and
Poettmann, F.H., Hand Book of Natural Gas Engineering, McGraw Hill Book Co.
Inc., 1959.
Res. No.
Page 50
Year: 4th
Theory: 3
Practical: 0
Practical: 0
Objectives:
To develop know how to utilize microbes carryout chemical conversions and to design for
above purpose
Course Outline:
Introduction; Chemical Engineering and Biotechnology; Cells, Cell structure, Cell types;
Lipids, Saccharine, RNA, DNA, Amino acids and proteins; Enzymes production and
kinectics, Substrate and its utilization; Biomass production and product formation;
Experimental techniques; Immobilization materials and techniques; Biochemical reactors;
Downstream processing; Application and future of biotechnology.
Books Recommended:
1. Malsch, H.N., Biomedical Nano -Technology, 2nd Ed., Taylor and Francis, 2005.
2. Greo, S. R., Pring, B. F. and Smith, R. L., Nanoscale Technology in Biological
Systems, 4th Ed., Taylor and Francis, 2004
Res. No.
Page 51
Year: 4th
Theory: 0
Practical: 2
Practical: 54
Objectives:
This course will make capable the students to understand basic needs and
requirement of a plant design practices and techniques by using design
codes and standards in industries.
Lab Outline:
Plant design project is the practical demonstration of students theoretical knowledge. In
plant design project groups of students are assigned a project which includes process
selection, capacity setting, overall material and energy balance, design of different units or
equipments, instrumentation and control, economic analysis of plant, hazard assessment &
HAZOP study etc. Students are required to present project in front of class and teaching
faculty in a seminar which helps to improve their interpersonal & communication skills.
Books Recommended:
All chemical engineering and other related books.
Res. No.
Page 52
Year: 4th
Theory: 2
Practical: 1
Practical: 54
Objectives:
To develop understanding of various simulations and programming tools for process design.
Course Outline:
Computer simulation in process engineering , steps in simulation approach , architecture of
flow sheeting software, selection of simulation software, steady state flow sheeting ,
dynamics simulation, introduction to various design and simulation software, eg HYSYS,
CamCad etc. ( a particular software may be selected to cover the rest of the course content) a
review of capabilities and limitations of the design/simulation software, flow sheets and sub
flow sheets, defining process streams and use of fluid packages, adding common unit
operations in the flow sheets, drawing simple process flow diagram ( PFD) in HYSYS,
steady state material and energy balances using graphical user interface and worksheet,
adding instrumentation and control components. Simple transient calculations
Lab Outline:
Material and energy balance, Flow sheeting on HYSIS, Chem Cad and Matlab
Books Recommended:
1. HYSYS (or ChemCAD) User and Tutorial Guides.
2. Chau, Pao C. Process Control : A First Course with MATLAB, Cambridge University
Press, 2002.
3. Davis, Timothy A. and Sigmon, Kermit, MATLAB Primer, 7th Ed. Chapman &
Hall/CRC, 2004.
Res. No.
Page 53