Professional Documents
Culture Documents
ROMES
Basic Operation
Training
Introduction
Making Connection
Dongle
Antenna
TSMW
LAN Cable
Power
GPS
Antenna
Firmware/Options Installation
Start ROMES
Creating Workspace
l A workspace contains all measurement settings
l It only needs to be created once and can be recalled on following
measurements
Create
workspace
Software Drivers(Loading)
l
Add/Remove Hardware
Loading of respective technologies drivers.
Available Drivers
Dependent on options purchased by Customer.
Software Drivers(Loading)
l
Resource Allocation
Allocate resources on various Front End.
Wrong Allocation prevent user from connection.
Clicking on Distribution allows auto allocation by system.
Software Drivers(Loading)
l
Loaded Drivers
Right Window shows successful loaded drivers.
Software Drivers(Configuration)
l
Sub Title2
Content
Software Drivers(Configuration)
l
CDMA Driver
Name of carriers
Frequency/channel/band etc to decode
Software Drivers(Configuration)
l
CDMA Driver
Saving/Loading of configured driver as Template.
Software Drivers(Configuration)
l
UMTS PN Driver
Name of carriers
Frequency/channel/band etc to decode
Software Drivers(Configuration)
l
UMTS PN Driver
Saving/Loading of configured driver as Template.
Software Drivers(Configuration)
l
Wimax Driver
Name of carriers
Frequency/Bandwidth etc to decode
Software Drivers(Configuration)
l
Wimax Driver
Saving/Loading of configured driver as Template.
Software Drivers(Configuration)
l
GSM Driver
Specify the GSM network, channels etc to decode.
Saving/Loading of Template.
Software Drivers(Configuration)
l
BTSPE Driver
Enable required technologies for BTSPE.
Dependent on options purchased by customer.
(Note: Wimax BTSPE is not supported)
Software Drivers(Configuration)
l
BTSPE Driver
l Min. position error (estimation cutoff)
Defines a distance in meter which limits the position
estimation to a reasonable accuracy for performance reasons.
If 66% probability of the estimated position falls below this
distance, the estimation process for this transmitter is finished.
Software Drivers(Configuration)
l
BTSPE Driver
l Update rate of results
Defines the period in seconds between estimation orders for
the position estimator. After executing the estimation order,
new position estimation results will be requested from the
position estimator and will be stored in the measurement file
(*.rscmd).
Software Drivers(Configuration)
l
BTSPE Driver
l
Software Drivers(Configuration)
l
BTSPE Driver
l
Software Drivers(Configuration)
l
RF PowerScan Driver
Software Drivers(Configuration)
l
RF PowerScan Driver
l
Basic Settings
Specify Sweep Name, Frequency etc.
Software Drivers(Configuration)
l
RF PowerScan Driver
l
Measurement Settings
Specify Bandwidth/FTT etc.
Software Drivers(Configuration)
l
RF PowerScan Driver
l
Detector Settings
Specify Count of Lines/RMS/Max etc.
Software Drivers(Configuration)
l
RF PowerScan Driver
l
Channel Filter
Enable filtering on specify signal in RF power scan
Software Drivers(Configuration)
l
RF PowerScan Driver
l
Example setting.
MapInfor Map
Right Click on the Navigation View
Click on Map -> Load MapInfo Map -> Load Map
User need to provide own license map
Open StreetMap
Configure Map
Saved WorkSpace
l
Workspace
Load Workspace
l
Workspace
Start Measurement
Stop Measurement
Navigation View
Maps
Navigation View
Maps
Navigation View
Maps
Reference: http://wise.cnit.it/files/user79/indoor-map.png
Indoor Driver
Repeat Step 2 by loading respective technologies driver. For navigation driver,
change to indoor input.
Hot Spot
Continuous
Indoor Driver
Hot Spot
Indoor Driver
Continuous
Operator Name
Operator Country
Operator
Logo
To
provide
the
operators logo. The
logo need to be in
.ico format.
Operator Name
Operator Country
Operator
Logo
To
define
the
Operators and its
supported
technology, band and
channels
Note
l
Title
l
Sub Title1
Content
Sub Title2
Content
THE END