You are on page 1of 2

International Journal of Research in Advanced Technology - IJORAT

Vol. 1, Issue 1, March 2015

Template for Research Publish Journal


<Title, 24 point, Bold>
Author1, Author2, Author3<12 point>
Designation, Department, College, City, Country 1<10 point>
Designation, Department, College, City, Country 2<10 point>
Designation, Department, College, City, Country 3<10 point>
Abstract: This document gives formatting instructions for authors preparing papers for publication in the
Proceedings of an International Journal. The authors must follow the instructions given in the document for the
papers to be published. You can use this document as both an instruction set and as a template into which you can
type your own text. <10 point,BOLD>
Keywords: Include at least 4 keywords or phrases<10 point>
I. INTRODUCTION<11 POINT,BOLD>
This document is a template. An electronic copy can be
downloaded from the conference website. For questions on
paper guidelines, please contact the conference publications
committee as indicated on the conference website.
Information about final paper submission is available from
the conference website. <10 point>

Authors Name

12

Author Affiliation

10

Abstract And Keywords

10

Headings

11

Sub Headings

10

Bold o

II. PAGE LAYOUT<11 POINT,BOLD>

Body Text, Equations

10

An easy way to comply with the conference paper


formatting requirements is to use this document as a
template and simply type your text into it. <10 point>

References

Acknowledgement

A. Page Layout<10 point,BOLD>


Authors are advised to prepare their Manuscript in
separate A4 size document and cut or copy their research
paper and paste it in this template. Other option is use this
Template for writing their research work. All the research
work of authors is only accepted in ENGLISH language and
Font face is TIMES NEW ROMAN only. Major font and
paragraph specifications are given in TABLE I. Number
style used may be Number or Roman Numerals depends on
author way of writing Manuscript. Heading and Subheading
of the section is written as I. INTRODUCTION or 1.
Introduction, it may be Uppercase or Sentence case. Try to
keep Manuscript precise and not more than 5 to 8 pages. All
the body text is justified (not heading and sub heading).
Major details of paper layout are given in TABLE II. All
paragraphs must be indented. All paragraphs must be
justified, i.e. both left-justified and right-justified.
TABLE I: FONT AND PARAGRAPH
SPECIFICATIONS <10 point, Bold>
Fonts: Times New Roman

Font Size

Title of Paper

24

TABLE II: PAPER LAYOUT


Header
Footer
Line Spacing for Body Text
Top Margins of Paper
Bottom Margins of Paper
Left Margins of Paper
Right Margins of Paper
B. Figures, Graphs and Tables
Figures and tables must be centered in the column. Large
figures and tables may span across both columns. Any table
or figure that takes up more than 1 column width must be
positioned either at the top or at the bottom of the page.
Graphics must not use stipple fill patterns because they may
not be reproduced properly. Please use only SOLID FILL
colors which contrast well both on screen and on a blackand-white hardcopy, as shown in Fig. 1.

All Rights Reserved 2015 IJORAT

International Journal of Research in Advanced Technology - IJORAT


Vol. 1, Issue 1, March 2015

acknowledge someone, then acknowledgement section


should include in research paper after conclusion. Appendix
section (if required) appears before acknowledgement
section.

III. CONCLUSION <11 point, Bold>


This paper shows the basic format of research paper
preparation and can be used as template writing research
paper. Conclusion of research paper is between 150 to 350
words.

Fig. 1 A sample line graph using colors which contrast well both on screen
and on a black-and-white hardcopy

Figures, graphs and tables should be inside the


margins of page. Figure caption is placed below the figures
and written as Fig. 1. Similarly, Table caption is placed
above the Tables and written as TABLE I. Do not use to put
figure inside the border. Figures, Graph and Tables captions
are flush centre and labels should be legible, 8 to 9 point.
Fig. 1, is used for referring figure in the text body. Similarly,
Tables and Graphs are used for referring table and graph in
the text body. First figure starts from Fig. 1 and last figure
ends with Fig. N (N is last figure of research paper).

Fig. 2. Example of an image

C. Conclusion Acknowledgement and Appendix


Conclusion section is mandatory and contains
advantages, disadvantages, review the main part of research
paper and use of research work. If author want to

ACKNOWLEDGMENT<11 POINT, BOLD>


The heading of the Acknowledgment section and the
References section must not be numbered.
REFERENCES<10 POINT, BOLD>
[1]

S. M. Metev and V. P. Veiko, Laser Assisted


Microtechnology, 2nd ed., R. M. Osgood, Jr., Ed. Berlin,
Germany: Springer-Verlag, 1998.
[2]
J. Breckling, Ed., The Analysis of Directional Time Series:
Applications
to Wind Speed and Direction, ser. Lecture
Notes in Statistics. Berlin, Germany: Springer, 1989, vol. 61.
[2] S. Zhang, C. Zhu, J. K. O. Sin, and P. K. T. Mok, A novel
ultrathin elevated channel low-temperature poly-Si TFT,
IEEE Electron Device Lett., vol. 20, pp. 569571, Nov. 1999.
[3] M. Wegmuller, J. P. von der Weid, P. Oberson, and N. Gisin,
High resolution fiber distributed measurements with
coherent OFDR, in Proc. ECOC00, 2000, paper 11.3.4, p.
109.
[4] R. E. Sorace, V. S. Reinhardt, and S. A. Vaughn, High-speed
digital-to-RF converter, U.S. Patent 5 668 842, Sept. 16,
1997.
[5]
(2002) The IEEE website. [Online]. Available:
http://www.ieee.org/
[6] M. Shell. (2002) IEEEtran homepage on CTAN. [Online].
Available:
http://www.ctan.org/texarchive/macros/latex/contrib/supported/IEEEtran/
[7] FLEXChip Signal Processor (MC68175/D), Motorola, 1996.
[8] PDCA12-70 data sheet, Opto Speed SA, Mezzovico,
Switzerland.
[9] A. Karnik, Performance of TCP congestion control with rate
feedback: TCP/ABR and rate adaptive TCP/IP, M. Eng.
thesis, Indian Institute of Science, Bangalore, India, Jan.
1999.
[10] J. Padhye, V. Firoiu, and D. Towsley, A stochastic model of
TCP Reno congestion avoidance and control, Univ. of
Massachusetts, Amherst, MA, CMPSCI Tech. Rep. 99-02,
1999.<9 points>

All Rights Reserved 2015 IJORAT

You might also like