Professional Documents
Culture Documents
A
Project Second Status Report
By
NARA IDA JOSLIN
(Reg.no:13691D3833)
Under the Guidance of
Mr. S.ARUN, M.Tech
Asst. professor
Submitted to
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY, ANANTAPUR
In partial fulfilment of the requirements for the award of the degree of
Master of Technology
In
DIGITAL ELECTRONICS AND COMMUNICATION SYSTEMS
BONAFIDE CERTIFICATE
This is to certify that the Project Report on Secured ATM Card Accessing
System Using RFID is a bonafide work done by NARA IDA JOSLIN (13691D3833) in
partial fulfillment for the award of M.Tech degree in Electronics and
Communication Engineering in Madanapalle Institute of Technology and Science,
Madanapalle, affiliated to Jawaharlal Nehru Technological University, Anantapur
during the year 2013-2015.
PROJECT GUIDE
Mr.S. ARUN,M.Tech
DR.A.R.REDDY, Ph.D
Assitant professor,
Dept.of ECE,
Dept.of ECE,
MITS, madanapalle.
MITS,madanapalle.
ABSTRACT
An automatic transaction machine (ATM) has become essential in our daily life. Security
in the ATM Network is primary concern because of financial transaction. This thesis presents an
ATM card access secured system using microcontroller LPC2148. The RFID card in the
proposed system identifies specific client. The identification is done by comparing serial number
of the user RFID tag with the stored data in the system. If the serial number of the RFID tag of
the user is matched with the stored data, then the system generates one time password (OTP) to a
particular client through GSM module. If the OTP entered is matched then transaction is done. If
the false character is entered buzzer will be activated and if more than three times false character
is entered then the transaction from microcontroller will stop . The system utilizes serial
communication with microcontroller to verify the information of the card holder. The proposed
ATM card access system Using RFID add one more level of security to exiting ATM.
INDEX
CHAPTER NO
1
CONTENTS
P.NO
Introduction
1.1 Objective
1.2 Methodology
Literature survey
Proposed Method
3.1.2 RFID
3.1.6 MAX232
3.1.7.Keypad
Hardware Components
Software Components
Software Implementation
Flow chart
14
LIST OF FIGURES
S.NO
3.1
CONTENTS
Block diagram of secured ATM Card
P NO
3
12
6.2
Selecting a device
13
6.3
13
6.4
14
6.5
14
7.1
15
CONTENTS
Literature survey of Secured ATM Card
P NO
2