Professional Documents
Culture Documents
Hans-Herlof Hardtke
Zeven, Germany
Headquarters
Bondoufle, France
Shanghai, China
Netherton, England
Wittenburg, Germany
(LISEGA affiliate for fasteners)
Overall contents
Detailed information on contents in the individual sections
Technical specifications
LICAD
Plug-in
and
Libraries
Product Group
0
1
2
Supplementary services,
engineering, field service
Product Group 1
Constant hangers, constant supports, types 11, 12, 19
Product Group 2
Spring hangers, spring supports, types 21, 22, 28, 29
Product Group 3
Snubbers, energy absorbers, rigid struts, viscoelastic
dampers, dynamic clamps, types 30-39
Product Group 4
Pipe clamps, clamp bases, pipe connecting parts,
types 41-46, 48-49
Product Group 5
Roller bearings, pipe saddles, cryogenic clamp bases,
types 51-58
Product Group 6
Threaded connecting elements, types 60-67
Product Group 7
Structural attachments, trapezes, clamps, slide plates,
types 73-79
Product Group 8
LISEGA software tools for planning and design
Product Group 9
Supplementary services, engineering, field service
Product
group
Technical
specifications
Technical
specifications
Technical
specifications
Contents
Page
PRODUCT
GROUP
2
3
4
5
6
7
8
9
0.0
Technical
specification
The products outlined in
this catalog - Standard
Supports 2020 - are fully
in line with the latest
developments in support
technology and satisfy
general requirements for
plant installation at the
highest level. For the
general design of LISEGA
standard supports, uniform criteria are applied.
They are described in the
following Technical specifications and are binding
for the contents of this
catalog. Componentrelated
features are outlined in the
corresponding sections of
the product groups and in
the type data sheets
1.1 Requirements
1.2 Definition
Unless expressly agreed
otherwise, the stipulations Standard supports must fulfill the following
criteria:
in the catalog Standard
Supports 2020 apply to
component shapes are uniform and
all our shipments.
designed to make the optimum use
of material
components are compatible regarding
dimensions and load capacity
components are cataloged and clearly
designated via an identification system
components are manufactured in series
production
components comply with the approved
standards and international codes
the functional capacity, suitability and durability of the components is well proven
components are certified and approved for
use by independent certification bodies
The relevant codes for pipe supports in German
and European plant construction (power stations), the DIN EN 13480-T3 and VGB Guideline
R 510 L, require the preferential use of standard
supports and define the criteria as follows:
3.2 Functionality
The standardization of components at LISEGA
is specifically directed toward their systematic
interaction as support configurations. To this
end, load and travel ranges as well as the geometry of the connections are harmonized. The
LISEGA standard support program has been
developed in this fashion as a fully functional
and effective modular system. The individual
components therein form modules and guarantee
load compatibility. This enables a wide range of
combinations to produce tailor-made support
configurations as required. The comprehensive
selection of components enables adaptation
widely to differing support situations and application conditions.
Product Groups
+ load groups
+ travel ranges
+ connection compatibility
= Modular System
Modular System
3.4 Load groups
+ CAD design
The goal of the LISEGA product strategy is to
To ensure uniform loading in component
+ IT Logistics System
achieve optimum user benefits for customers at combinations the product groups are arranged
the lowest cost, following the economic principle. throughout according to clearly classified static
and dynamic load groups (see p. 0.5 and p. 0.6). = High-Tech Application
The LISEGA modular system provides the corresponding basis. The standardization of components is the decisive prerequisite for:
0.2
product group
Constant
hangers &
supports
Spring
hangers
Dynamic
components
Pipe
connecting
components
Pipe
bearings
and saddle
components,
cryogenic
clamp bases
Threaded
connecting
elements
Structural
attachment
elements
constant
travel range
[mm]
0 - 75
0 - 150
0 - 300
0 - 450
0 - 600
0 - 750
0 - 900
hangers
type
designation
1. .1 ..
1. .2 ..
1. .3 ..
1. .4 ..
1. .5 ..
1. .6 ..
1. .7 ..
spring hangers
travel range
type
[mm] designation
0 - 50
2. .1 ..
0 - 100
2. .2 ..
0 - 200
2. .3 ..
0 - 300
2. .4 ..
0 - 400
2. .5 ..
type
150
300
400
500
600
750
100
30
30
30
30
30
30
30/31
30/31
200
0.3
type
designation
3.
3.
3.
3.
3.
3.
3.
.2
.3
.4
.5
.6
.7
.8
..
..
..
..
..
..
..
3. .9 ..
standard components
type
component
11
12-14
16
17
18
19
19
71
79
20
21
22
25
26
27
28
29
72
79
30
31
32
33
34
35
36-38
39
3D
3L
3R
40
41
42-44
45,46,48
49
77
51
52
53
54
54
55
56
57
57
58
60
61
62
63
64
65
66
67
70
73
74
75
76
78
79
Constant hangers
Constant hangers, multi-cell
Constant supports, multi-cell
Servo hangers
Constant hangers, low profile
Constant supports, low profile
Angulating const. supp., low profile
Brackets for constant hangers
Constant hanger trapezes
Angulating spring supports
Spring hangers
Heavy duty spring hangers
Spring hangers, seated
Heavy duty spr. hang. (seated)
Sway braces
Heavy duty spring supports
Spring supports
Base plates
Spring hanger trapezes
Snubbers
Large bore snubbers
Energy absorbers
Installation extensions
Dynamic pipe clamps
Weld-on brackets
Dynamic pipe clamps
Rigid struts
Viscoelastic dampers
Shear lugs
Pipe whip restraints
U-bolts
Weld-on lugs
Horizontal clamps
Riser clamps
Clamp bases, lift-off restraints
Connection plates
Cylinder roller bearings
Double taper roller bearings
Double cylinder roller bearings
Weld-on pipe saddles
Pipe saddle with pipe clamps
Lift-off restraints
Cryogenic clamp bases
Cryogenic axial stops
Weld-on pipe shoes
Stanchions
Eye nuts
Clevises
Turnbuckles
Hexagon nuts
Rod couplings
Tie rods L/R
Tie rods
Threaded rods / stud bolts
Sliding components
Weld-on clevises
Weld-on plates with sph. washers
Weld-on eye nuts
Beam adapters
Beam clamps
Trapezes
Constant hangers,
constant supports
Pipe clamps,
clamp bases,
pipe connections
Cryogenics,
stanchions, roller bearings,
pipe saddles
Load and
connection compatibility
M
10
M
10
M
12
M
12
M
16
M
20
M
24
M
30
M
36
M
42
M
48
M
56x
M 4
64
M x4
68
M x4
72
M x4
80x
4
10
C
10
D
12
1
12
2
16
3
20
4
24
5
33
6
40
7
45
8
50
9
60 0
1
70 0
2
70 0
3
80 0
4
90 0
5
Connecting
components
Snubbers,
rigid struts, energy absorbers,
viscoelastic dampers,
dynamic clamps
1
0.3
2
0.6
5
1.2
0
2.5
0
5.0
0
0
.
10
00
20.
00
40.
00
60.
00
80.
0
0
.
100 0
.0
0
6
1 0
.0
200 0
.0
0
4
2
.00
0
30 0
.0
400
nominal load kN
LISEGA Software
Tools for Planning
and Design
bolts
load group
thread
Structural attachments,
trapezes, beam adapters,
slide plates
Spring hangers,
spring supports
0.4
Cold load:
The cold load is the load determined by the pipe system calculations for the support point in shut
down condition.
4. Permissible loads
dynamically determined
components product group 3
load nominal connectgroup load [kN] ing bolt
1
3
10
2
4
10
3
8
12
4
18
15
5
46
20
6
100
30
7
200
50
8
350
60
9
550
70
10
1000
100
20
2000
120
30
3000
140
40
4000
160
50
5000
180
0.5
For dynamically loaded components the nominal load corresponds at the same time to the
operating load for load case H (under normal
conditions) or load A/B (ASME).
code
ASME section III, NF
RCCM
MSS SP-58
DIN EN 13480
VGB-R 510 L
KTA 3205.3
examples
load case HZ
(emergency)
H x 1.5
H x 1.33
H x 1.2
H x 1.2
H x 1.15
H x 1.15
load case HS
(faulted condition)
H x 1.6
H x 1.6
no data
no data
H x 1.5
H x 1.5
faulted condition HS/faulted
80C
150C
1.4
1.3
4.3
3.8
7.2
6.4
13.3
12
22.2
20
41
37
61
55
96
86
140
126
195
175
255
230
381
343
512
461
585
526
650
585
840
755
4
5.5
8
11
faulted condition
level D
80C
150C
5.2
5.0
6.9
6.7
13.7
12.6
31
28.5
77
74.5
180
162
336
301
655
588
935
910
1740
1612
3440
3270
5160
4900
6880
6530
8600
8150
16
22
60 120
80 160
3D .. .. -D
3D .. .. -L
2.5
5.0
5
10
10
15
20
25
30
40
40
50
60
80 100
0.6
5. Type designations
2nd digit 3rd digit 4th digit 5th digit 6th digit
constant load group travel
field of
production
hanger
[kN] range [mm] application
series
8= CH short
D=M10 1=75
1=M12 2=150
2=M12 3=300
3=M16
4=M20
9= C-support, 5=M24
Angulating 6=M30
constant 7=M36
support,
8=M42
short
9=M48
1
2
3
4
5
=
=
=
=
=
C=M10
D=M10
1=M12
2=M12
3=M16
4=M20
5=M24
6=M30
7=M36
8=M42
9=M48
2=150 1= standard
3=300 5= <increased
4=450
require5=600
ments>
6=750
7=900
8LG10
9LG20
3= CH 3 x
coupled
8LG30
9LG40
4= CH 4 x
coupled
6= heavy con.
support
8LG40
9LG50
8160kN 2=150mm 2= coupled 2 x
9200kN 3=300mm
8240kN
3= coupled 3 x
9300kN
8320kN
4= coupled 4 x
9400kN
5=M24
6=M30
7=M36
8=M42
9=M48
0.7
1,2= standard
constant support
3,4= standard
angulating
constant support
5,6= support
<incr. requirem.>
constant support
7,8= <increased
requirements>
angulating
constant support
6=with high
temp. SE*
7=with
PTFE-SE*
2=150 1= standard
3=300 5= <increased
requirements>
6=with high
temp. SE*
7=with
PTFE-SE*
9=without
SE*
5=1985
6= dynamic
pipe
clamps
with
U-bolt
7= dynamic
clamps
with strap
9= rigid
struts
C=M10
D=M10
1=M12
2=M12
3=M16
4=M20
5=M24
6=M30
7=M36
8=M42
9=M48
1= 50
2=100
3=200
4=300
5=400
9 = Ext.
f. type 20
& type 27
& type 29
1= standard
5= <increased
requirements>
2= telescopable
spring support
6= <increased
requirements>
4=1994
8=1978
6=with high
temp. SE*
7=with
PFTE-SE*
9=1999
1=1991
1=M56x4 1= 50
2=M64x4 2=100
3=M68x4 3=200
4=M72x4
5=M80X4
1= standard
9=1999
5= <increased
requirements>
2= standard
6= <increased
6=with high
requirements> temp. SE*
7=with
PFTE-SE*
T0=1016
T1=1067
T2=1118
T3=1168
T4=1219
2=4
3=8
4=18
5=46
6=100
7=200
8=350
9=550
0=1000
0= hydr.
snubber
serial
version
2= energy
absorber
3= extension
1=3
2=4
3=8
4=18
5=46
6=100
7=200
8=350
9=550
0=1000
2=150 1= standard
3=300 5= <increased
4=400
requirements>
5=500 9= to 600C
8=100
9=200
1= hydr.
snubber
large
bore
2=2000
3=3000
4=4000
5=5000
9=550
0=1000
8=100
9=200
79=200 1= standard
89=350 5= <increased
requirements>
99=550
09=1000
20=2000
2=2002
3=1993
6=1986
8=1988
1=1991
3=1993
9=1989
8=1988
standard
1=to 350C
2=to 500C
3=to 560C
4=to 600C
<increased
requirements>
6=to 350C
7=to 500C
8=to 560C
9=to 600C
1-3= 1 x
U-bolt
4-5= 2 x
U-bolt
1-6= 1 x
Strap
7-8= 2 x
Strap
Middle installation
dimension in mm/100
3-4=
standard
8-9=
<increased
requirem.>
2nd digit
design
D= viscouselastic
damper
40=40 3=30
50=50 4=40
60=60 5=50
80=80
H1=100
3=30
4=40
5=50
.. .. ..-L = limit
PG 3 Dynamic components
5= weld-on 19=3
brackets 29=4
39=8
49=18
59=46
69=100
Pipe diameter
in mm/10
.. .. ..-D = depend
2nd digit 3rd digit 4th digit 5th digit 6th digit
load
travel
field of
production
design group [kN] range [mm] application
series
2= CH 2 x
coupled
7= servo
hanger
3=2013
5=1985
9=1999
9=2009
2nd digit 3rd digit 4th digit 5th digit 6th digit
pipe diameter
field of
production
design
series
load group [kN] application
01=21.3
03=33.7
05=48.3
07=73.0
09=88.9
11=114.3
14=139.7
17=168.3
22=219.1
horiz. clamp 26=267.0
32=323.9
2= 1-hole
37=368.0
2= 2-hole
42=419.0
3= 3-hole
51=508.0
4= with
61=609.6
U-bolt
or strap 71=711.2
81=812.8
riser clamp 91=914.4
5= flat steel T0=1016
6= box-sh. T2=1118
for shear lugs T4=1219
8= box-sh
for trunnions
02=26.9
04=42.4
06=60.3
08=76.1
10=108.0
13=133.0
16=159.0
19=193.7
24=244.5
27=273.0
36=355.6
41=406.4
46=457.2
56=558.8
66=660.4
76=762.0
86=863.6
97=965.2
T1=1067
T3=1168
1=standard
for straight
pipes max.
insulation
thickness
in mm
1=10
2=100
1=standard
for pipe
elbows
R1.5OD
max
insul.
thickn.
in mm
3,4=10
5,6=100
standard
1=to 350C
2=to 500C
3=to 560C
4=to 600C
5=to 650C
depending on
Load
Group
and
design
<increased
requirements>
6=to 350C
7=to 500C
8=to 560C
0=special material
design
9= clamp
base
0= U-bolt
9= lift-off
restraint for
clamp base
01=21.3
03=33.7
05=48.3
07=73.0
09=88.9
11=114.3
14=139.7
17=168.3
22=219.1
26=267.0
32=323.9
37=368.0
42=419.0
51=508.0
61=609.6
71=711.2
81=812.8
91=914.4
T0=1016
T2=1118
T4=1219
02=26.9
04=42.4
06=60.3
08=76.1
10=108.0
13=133.0
16=159.0
19=193.7
24=244.5
27=273.0
36=355.6
41=406.4
46=457.2
56=558.8
66=660.4
76=762.0
86=863.6
97=965.2
T1=1067
T3=1168
00= lift-off
restraint
1= low
2= middle
3= low,
welded
4= med.,
welded
5= high,
welded
1= S235JR
8=
3= 1.4301
standard
<incr. requirem.>
6= S235JR
8= 1.4301
0= lift-off
restraint
1-5=
compon.
size
design
1= cyl. roller bear.
2= doub.tap.roll.bear.
3= doub. cyl. roll.
bear.
5= lift-off restraint
for roll. bear.
4= pipe saddle
with pipe
clamps,
weld-on
saddles
6= cryogenic
clamp base
7= cryogenic
axial stop
6= pipe bearing
with cold
block
A= weld-on
bearing
8= pipe
supports
th
04= 4kN
08= 8kN
12= 120kN
16= 16kN
35= 35kN
60= 60kN
01= 21.3mm
02= 26.9mm
03= 33.7mm
05= 48.3mm
06= 60.3mm
07= 73.0mm
08= 76.1mm
09= 88.9mm
10=108.0mm
11=114.3mm
13=133.0mm
14=139.7mm
16=159.0mm
17=168.3mm
19=193.7mm
22=219.1mm
24=244.5mm
26=267.0mm
27=273.0mm
32=323.9mm
36=355.6mm
37=368.0mm
41=406.4mm
42=419.0mm
46=457.2mm
51=508.0mm
56=558.8mm
61=609.6mm
66=660.4mm
71=711.2mm
76=762.0mm
81=812.8mm
91=914.4mm
97=965.2mm
th
2nd digit
design
load group
0= eye nut
1= clevis
2= turnbuckle
4= rod
coupling
D9= M10-0.62kN
29= M12-2.50kN
39= M16-5.00kN
49= M20-10.0kN
59= M24-20.0kN
69= M30-40.0kN
79= M36-60.0kN
89= M42-80.0kN
99= M48-100kN
10= M56x4-160kN
20= M64x4-200kN
30= M68x4-240kN
40= M72x4-300kN
50= M80x4-400kN
3= hex. nut
Length: 1= standard
1=not 5= <increased
standard requirements>
2= 500mm
3=1000mm
4=1500mm
5=2000mm
6=2500mm
7=3000mm
10=M56x4
Length
20=M64x4
not
30=M68x4 stand40=M72x4 ardized
50=M80x4
D=M10
2=M12
3=M16
4=M20
5=M24
6=M30
7=M36
8=M42
9=M48
Type designation
1 2 3 4 5 6
Production series/travel/variant
Field of application/travel
Travel range/pipe /function
Load gr./pipe /thread
Design
Product Group (PG)
1= without
pipe clamps
2,3= with
pipe clamps
Length:
3=150mm
5=300mm
7=500mm
8=750mm
Insulation
thickness
in mm
0=25
1=40
2=50
3=80
4=100
5=130
6=150
7=180
8=200
9=250
9= pipe
1= pipe
bearing with bearing
cold block
Examples
design
0= sliding
elements
Length
1= 50
2=100
3=150
4=200
6=300
7=390
8=490
1 1 5 3 1 5
4 9 5 1 8 5
1= welded 1=
2,3= bolted rectangular,
up to 180C
4=
rectangular,
up to 350C
1= support
bearing
for heavy
constant
hanger
2=150
3=300
4=450
5=600
6=750
(7=900)
6= standard 1= single
8= <increased support
requirements>
8=160kN
9=200kN
2= coupled
2x
8=240kN
9=300kN
3= coupled
3x
8=320kN
9=400kN
4= coupled
4x
2= standard 8= 1978
7= <increased
requirements>
1= standard 2= 1982
5= <increased 3= 1993
requirements> 9= 1989
5= weld-on
eye plate
6= beam
adapters
& combinations
1= 2001
C2= size 1=
cantilever
6= vertical
connection
7= horizontal
connection
00=lift-off restraints
1...4= size
1= 1991
9= constant
3 to 6 digits correspond to
1985 hanger trapezes
single hangers in each case (see PG1)
Standard design 9= spring
3rd to 5th digits correspond to
1= welded
hanger
single
hangers in each case (see PG2) unit
Travel range 3/0-300mm
trapezes
9= with
Load gr. 5/FN = 20kN
individual
Individual design
supports
Constant hanger 9= rigid
C4=
2,3=
3= standard 7=
trapezes
Load Group depending 7= <increased L-profile
on design requirements> 9= U-profile,
29=
Load Group type
centric
High design, welded
connection
rd
Pipe connection
th
0 LG9
220=
Load Group
1= Standard 1= out of
T-section
2= out of
U-section
1,2=for
str. pipes
3,4=for
elbows
R DA
5,6=for
pipe elbows
R1.5 DA
2nd digit
2= standard 3=1993
3= 25CrMo4 8=1978
5= <increased 9=1999
requirements>
th
1= standard 9=1989
2= movable
laterally
1= rigid
pipe
supports
2= pipe
supports,
adjustable
PG 7 Structural attachments
and trapezes
4=
U-profile
4 4 6 1 4 8
3 9 6 2 5 4
Rigid strut
Pipe connection
0.8
Worldwide coverage of
recognized standards
Europe
Germany
Germany
Germany
France
USA
USA
USA
USA
Japan
Japan
Russia
7. Materials
Materials are exclusively used that conform to
DIN-EN, ASTM or CN steel material requirements.
0.9
temperature of medium in C
ASTM
DIN-EN
S235JR
S235JR
S235JR
S355J2
S355J2
S355J2
P235TR1
P235GH
P355NH
16Mo3
13CrMo4-5
10CrMo9-10
X10CrMoVNb9-1+NT/QT
X5CrNi18-10
42CrMo4+QT
X10CrMoVNb9-1+NT/QT
21CrMoV5-7+QT
25CrMo4+QT
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
CN-Steel
Q235B
560
x
x
x
x
x
x
x
600 650
x
x
x
x
x
x
8. Welding
All welding is carried out as gas metal arc welding
under protective gas according to DIN EN ISO
4063.
0.10
9.1.6 Snubbers
Snubbers are manufactured completely from corrosion resistant materials and require no special
coating.
The separate connection lugs of type 30, are
manufactured from carbon-steel, and treated
according to 9.1.7.
9.1.3 Electrogalvanizing
0.11
up to 350C
[3. .. 1. / 4. .. 1.]
[3. .. 6. / 4. .. 6.]
electrogalvanization
2.]
3.]
4.]
5.]
7.]
8.]
Ethylsilicate
coating outside
the insulation
Primer coating
inside the
insulation
Insulation
For components not suited to hot dip galvanization due to the material used or the application
area, the version Increased corrosion protection
C4 corresponding to 9.2 represents a good
alternative.
0.13
10.1 Function
10.1.1 Constant hangers / supports
Constant hangers and constant supports of the
product group 1 are designed, that in theory,
minimum load deviation occurs over the whole
operating range. The total deviation arising from
springs, bearing friction and production tolerances is restricted to 5% in series production. Load
adjustment is made to an accuracy level of 2%.
load F
FN
Fmin
Fmax
= nominal load
= minimum load
(upward travel)
= maximum load
(downward travel)
= nominal travel
(incl. reserve)
Fmax
Fmin
sN
travel s
spring hanger
sN
1.05 FN
FN
0.95 FN
FH
FC
s
travel s
nominal load
nominal travel
(incl. reserve)
hot load a
(operating load)
for downward
operational travel
cold load a
(installation load)
operational travel
snubbers
sa =
load F
Snubbers are designed, in the event of an impact load between the component to be secured
and the building structure, to produce an instantaneous rigid connection. Slow displacement
due to thermal expansion must not be resisted.
Hence the locking mechanism that blocks the
component reacts to velocity. The individual
functional data are specified in section 3, p. 3.7.
FH =
FC =
10.1.3 Snubbers
FN =
sN =
sb =
piston rod
tolerance
piston rod travel
sb =
operational stroke
travel s
sa
sb
viscoelastic damper
load F
dissipated
energy
travel s
sb
reduced friction force
load F
=0.3
Reduction in reaction
forces in the piping
system by the use of
slide plates.
=0.1
travel s
0.14
[%]
relaxation
[N/mm2]
shear stress
In contrast to common practise, LISEGA exclusively uses specially treated springs that exhibit
practically no relaxation.
In these springs the expected settling loss is
anticipated through hot setting. This method
is called prerelaxation.
type 75
type 61
type 66
type 67
type 60
type 42
X
Et
This E dimension denotes the respective installation length of the components minus the thread
engagement depths (X dimensions) of the connecting tie rods and threaded rods.
The length of the rods required is given by the
total installation height (pipe axis to reference
edge of connection surface) minus the sum
of the E dimensions of the components to be
connected.
To determine the total length of the rods in
a load chain all the E dimensions are added
together. The sum is compared with the total
installation dimension. If a difference results
which is greater than the sum of the thread
engagement depths (X dimensions), then the
chain selected is correct for the total installation height.
= Thread depth
= Total installation
dimension
(Et=Etotal)
For load chains solely with bolted connections
= Length adapted to
the minimum installation dimension results from
individual installation the sum of all E dimensions.
conditions
Product-related details are to be found in the
selection tables.
0.15
11.2 Regulation of total installation length Further instructions are given in the corresponding installation instructions.
Constructive devices
available for the subsequent adjustment of
installation lengths!
max
min
Turnbuckle type 62
The particular measures ensuring quality undertaken by QM are outlined in the quality management program (QMP), which covers the whole
The QMP, as an integral
organization. These measures and activities to
component, forms an entity
promote quality are an integral component in
the processing cycle and are firmly rooted in the with the processing cycle!
procedures.
0.16
12.2 Raw material and goods reception inspection of the quality management
All the materials used are monitored by way of
a receiving inspection check by quality management regarding compliance with the technical
specifications. The materials used are, according to requirements, certified by material test
approvals according to ASME and DIN EN 10204.
0.17
program
inspection of the materials used
inspection of the design documentation
verification of the computer-based tensile
stress values
experimental testing on
function
overload capacity
continuous load capacity
Separate production
processes of components
meeting increased requirements for the traceability
of certified materials!
certifing body
certification No.
ISO 9001
TV Nord
BSI
TV Rheinland
AFAQ
LRQA
TV Nord
78 100 034445
FS 557331
01 100 038965
1996 / 5030.4
MEA6011026/1
07 100 010963
EN 1090-1:2009/A1:2011
TV Nord
TV Nord
TV Nord
TV Nord
TV Nord
AFAQ
0045-CPR-1090-1.00151
TVNORD.2013.002
DIN 18800-7 / 0513-EW /13/0
07-203-1282-HP-0513/13
07-202-1282-EN -0513/13
78 116 034445
2010/38940.1
TV Nord
78 104 034445
TV Nord
78 106 034445
N 3092
N 3025
KTA 1401
NNSA Designing
NNSA Manufacturing
ASME
ASME
VGB, EnBW Kernkraft,
RWE, E.ON, Vattenfall
China National Nuclear
Safety Administration
N 3169
N 2951
1405
1406
TN VED / Rostechnazor
PPC 00-043746
GOST R
RST Expert
POCC DE.A80.H02052
POCC DE.A80.H02053
POCC DE.A80.H02054
SPIR-O-2008
SSMFS 2008:13
ASME section III Div. I, Subs.
NF Class 1.23, MC, ASME section XI
POCC RU.0001.01A00.00.10.2849
Tractebel Belgium
2951
5477
0.18
16. Warranty
0.19
0.20
1
PRODUCT
GROUP
Constant hangers,
constant supports
Constant hangers,
constant supports
Constant hangers,
constant supports
Contents
Page
1
0
PRODUCT
GROUP
3
4
5
6
7
8
9
1.0
Field of application
To avoid unacceptable
forces and moments in
pipe systems, the thermal
expansion of the piping
must not be restricted.
1.1
Constant hanger
type 11
The function principle is based on the arrangement of three springs resulting in the parallelogram of forces. The design is distinguished
by highly functional accuracy along with wide
load adjustment ranges. The favorable powerto-weight ratios and symmetrical designs
enable easy installation. For further typical
advantages, see p. 1.3.
Constant hanger
type 18
As a rule, the pipe support
engineer allows for sufficient
installation space for the
supports required. However,
due to limitations of space the
installation height can be too
small for the typical standard
solution with type 11.
This sometimes occurs, especially when replacing existing installations. To provide the
optimum solution in such cases, type 18, a
low profile design, is available from the LISEGA
hanger range, beside the main type 11 series.
The function principle of this design is based
on the lever principle. Unlike the usual leverarm type hangers, the load displacement here
is linear and is constant, following the LISEGA
principle (see function principle, p. 1.6).
Constant hanger
type 18
On the basis of their special function principles and modes of design, LISEGA constant
hangers and supports have, for the past five
decades, proven their outstanding operational safety and reliability many thousands of
times. Further descriptions of their mode of
operation and function are set out on p. 1.6
and their design features from p. 1.7.
In the case of constant hangers, the pipe systems are suspended from roof constructions
or the steelwork. If the piping is laid out near
ground level it may be appropriate to take up
the loads from below with constant supports.
1.2
8
2
10
3
10
4
5
Constant hanger
type 11
axis of symmetry
3
1
2
10
Constant hanger
type 18
3
7
1
2
10
9
Constant support
type 19
1.3
Type 11
Type 18
Type 19
Servohanger type 17 52 15 to 17 93 15
Servohangers are equipped with additional
active load regulation and can reduce overloading in the piping system to a permissible
harmless level.
Type 16
1.4
WIRKUNGSWEISE UND
Mode of operation and function
FUNKTION
WIRKUNGSWEISE UND
Types 11, 12, 13, 14, 16, 79
FUNKTION
Besondere Anforderungen
An die zuverlssige Funktion von Konstanthngern
sind
strenge Anforderungen zu
Besondere
Anforderungen
The LISEGA Function Principle
stellen:
An die zuverlssige Funktion von KonstantThe LISEGA Function Principle is based on the
hngern sind strenge Anforderungen zu
interaction
of the force from a mainspring and
exakte
Konstantheit
bei jeder
stellen:
Lasteinstellung
the resulting force of two connected balance
exakte Konstantheit
bei The
jeder force directions of the pre-loaded
springs.
minimierte mechanische
Reibungskrfte
Lasteinstellung
compensating springs are thereby angled
F2
E
FD2
E
CD
C
B
B
A
F
A
Ebenso
sind frmechanische
die
laufende
berwachung
against
each
other in the shape of a parallel minimierte
Reibungskrfte
des Rohrleitungsverhaltens
ogram ofbesondere
forces. Voraussetzungen
zudie
erfllen:
Ebenso sind fr
laufende berwachung
des Rohrleitungsverhaltens besondere VorThe
suspended
zuverlssige
fr load F acts directly on the
aussetzungen
zu Kontrollanzeigen
erfllen:
mainspring
Einstelllast und
Wegstellung B via the load tube A . The pre zuverlssige Kontrollanzeigen
fr
loaded compensating
springs C act additionally
ausreichende und przise
Einstelllast und
Wegstellung
on
the
load
tube
as
the
resulting force F2 via
Nachstellmglichkeit der Last
D
pivoting
cams
and
roller
supports E . The
ausreichende und przise
Nachstellmglichkeit
der Lastforce F1 and the resulting force
mainspring
Das LISEGA-Funktionsprinzip
F2 change on the shifting of the load over the
Fr die Erfllung der Anforderungen bietet
displacement
range in accordance with the
das
LISEGA-Funktionsprinzip die
Das patentierte
LISEGA-Funktionsprinzip
specified
spring
constants, the cam path, and
besten
Hiernach beruht
Fr die Voraussetzungen.
Erfllung der Anforderungen
bietet
the
angular
position
die
Wirkungsweise
auf
dem
Zusammenwirdas patentierte LISEGA-Funktionsprinzip dieof the cam components.
ken
derVoraussetzungen.
Kraft aus einer Hauptfeder
und der
besten
Hiernach beruht
resultierenden
Kraft
zweier
die Wirkungsweise
auf
demzugeschalteter
ZusammenwirThe
course
of the resulting force corresponds
Ausgleichsfedern.
Kraftrichtungen
derder
ken der Kraft aus Die
und
toeiner
theHauptfeder
characteristics
of the mainspring. In this
vorgespannten
Ausgleichsfedern
sind dabei
resultierenden Kraft
zweier zugeschalteter
way
the
mainspring
force
is balanced out,
nach
Art eines Krfteparallelogramms
winklig
Ausgleichsfedern.
Die Kraftrichtungen der
without
deviations,
to
a
constant
support force.
gegeneinander
gerichtet.
vorgespannten Ausgleichsfedern sind dabei
nach Art eines Krfteparallelogramms winklig
F wirkt ber das
Die
anhngendegerichtet.
Last
gegeneinander
J The
LISEGA function principle leads to
Lastrohr A direkt auf die Hauptfeder B .
absolute
constancy which by theory can
Die Vorspannkrfte
derF Ausgleichsfedern
anhngende Last
wirkt ber das C
easily
be
F2 berproven.
wirken
Kraft
schwenkB .
LastrohralsAresultierende
direkt auf die
Hauptfeder
bare
Kurventeile D und
die Sttzrollen E C
Die Vorspannkrfte
der Ausgleichsfedern
zustzlich
dasJLastrohr.
Die
HauptfederF2 ber
wirken als auf
resultierende
KraftLISEGA
schwenk The
function principle permits an
F2 verndern
F1 und die D
kraft
Resultierende
E load adjustment range of
bare Kurventeile
und
die Sttzrollen
especially
wide
sich
bei Verschiebung
der Last
den
zustzlich
auf das Lastrohr.
Die ber
Hauptfeder40% 100%
the nominal load.
s entsprechend
Bewegungsbereich
denofvorF2 verndern
kraft F1 und die Resultierende
gegebenen
Federkonstanten,
derber
Kurvenbahn
sich bei Verschiebung
der Last
den
und
der Winkelstellung
der Kurventeile.
s entsprechend
Bewegungsbereich
den vorgegebenen Federkonstanten, der Kurvenbahn
Der
der Resultierenden
entspricht
und Verlauf
der Winkelstellung
der Kurventeile.
exakt der Kennlinie der Hauptfeder. Dadurch
wird
die Kraft
Hauptfeder ohne
AbweiDer Verlauf
derder
Resultierenden
entspricht
chungen
einer konstanten
Sttzkraft
ausexakt derzu
Kennlinie
der Hauptfeder.
Dadurch
geglichen.
wird die Kraft der Hauptfeder ohne Abweichungen zu einer konstanten Sttzkraft ausgeglichen.
Load adjustment
Obere Stellung
F
Obere Stellung
E
C
E
D
C
D
B
F1
B
FA1
A
F
Mittlere Stellung
Mittlere Stellung
F2
D
FC2
ED
C
E
B
F1
B
F1
A
A
F
Untere Stellung
Untere Stellung
F
G Funktionsweise der
LISEGA-Konstanthnger.
G Funktionsweise der
LISEGA-Konstanthnger.
1.13
1.13
Adjustment screws
1.5
25
50
=75
50
25
=75
75
=75
100
25
=75
The load adjustment is carried out by a preloading of the mainspring. As the characteristics of the resulting balancing force and the
mainspring are the same, only a linear shifting of the initial force thereby occurs F . This
way, the change in force is the same at every
point of the movement and the ultimate load
remains constant at each load setting.
1
A
C
B
D
A
B
C
D
Load adjustment
D
C
Spring force
Lever arm
Leverage
Load arm
Load
1.6
Design features
type 79
trapeze
Design Structure
Performance range
Connection possibilities
type 71
support bearing
type 11
constant
hanger
Spring relaxation
When subjected to loads and temperature over
a period of time, conventional helical coil springs
lose part of their reset force through relaxation
(settling loss). In constant and spring hangers
this can, in the long term, lead to a reduction
in the set ultimate load of more than 10%
(see calculation example).
LISEGA exclusively uses springs that, through
an artificial aging process, show no appreciable settling loss. The spring relaxation
normally to be expected is anticipated by
producing preplastification in a hot setting
process with greater coil lengths.
steelwork
provided
by customer
1.7
boi
ler
out
let
hea
der
planned
condition
connection
point /
hanger
ler
boi
set load of
hanger
hanger
load
58.93
67.50
54.33
78.35
53.04
60.75
48.90
70.52
58.42
58.31
35.97
47.65
54.10
67.26
52.58
52.48
32.37
42.89
48.69
60.53
7.30
17.25
36.70
Calculation example of
cumulative additional loads
due to hanger relaxation
A pipe system was observed
(dia = 525mm, s = 27mm,
temperature = 540C, pressure =
50 bar). The effect of a 10% loss
of force in the hangers was assumed. Due to this loss, the pipe
system is displaced by 36.4mm.
0.0
-1.0
-5.1
-6.9
0.3
0.0
-4.4
-20.7
-30.4
-36.4
-19.2
-1.0
0.0
Corrosion protection
The constant hangers are finished with a LISEGA
standard coating which, together with a metallically pure treated surface, offers superior
corrosion protection with high mechanical
stability. Bearings and bearing bolts for the
constant hangers are plated or made of nonrusting materials. All threaded components
and cams are electro-galvanized. The surface
of the spring is given a special finish (technical specifications p. 0.11).
Constant hangers with standard corrosion
protection need no maintenance if installed
in buildings or in locations protected from
the weather. For operation in the open or
in special situations, corresponding extra
corrosion protection can be arranged see
the corrosion protection section in technical
specifications, p. 0.10.
Paintshop
1.8
Function testing
Functional performance
Function testing
Applying a selection process, with limited load Before shipment, all constant hangers and
and travel ranges, it is possible to reduce this supports are tested for flawless functioning
even further.
and set to the load ordered. The test results
are recorded.
The calibration values are stamped onto a
riveted name plate. The calibration load is
also marked permanently on the load scale.
Hot and cold positions are noted on the travel
scale in red and white respectively.
The respective travel positions can be read
directly off the travel scale in mm or inches.
1.9
1.10
Installation overview
Universal adaption to
existing installation
spaces
The installation of the
constant hangers can be
adapted to any situation
in the plant through the
use of universal accessory
components from the
modular system.
Automatic designing
type 73
type 60
type 63
type 67
type 63
type 11
type 75
type 61
type 67
type 11
type 63
type 66
type 63
type 63
type 67
type 61
type 49
type 44
type 63
type 61
type 79
type 73
type 60
type 67
type 11
type 11
type 67
type 63
type 60
type 49
type 63
type 67
type 63
type 61
type 79
type 75
type 61
type 67
type 11
type 63
type 67
type 63
type 18
type 63
type 61
type 79
type 61
type 63
type 43
type 67
type 49
type 63
type 67
type 63
type 61
type 79
type 60
type 63
type 67
type 63
type 61
type 44
type 63
type 61
type 79
type 11
type 71
type 37
type 63
type 49
type 66
type 19
type 19
type 63
type 60
type 43
1.11
type 35
type 73
type 60
type 67
type 61
type 79
type 61
type 63
type 67
type 63
type 61
type 79
type 61
type 63
type 67
1
type 73
type 60
type 67
type 11
type 63
type 63
type 67
type 63
type 61
type 79
type 61
type 63
type 11
type 67
type 67
type 60
type 43
type 63
type 61
type 48
type 73
type 60
type 63
type 66
type 63
type 75
type 61
type 67
type 11
type 11
type 63
type 63
type 66
type 67
type 63
type 61
type 46
type 63
type 61
type 48
type 71
type 11
type 63
type 66
type 63
type 60
type 43
type 73
type 18
type 63
type 67
type 63
type 61
type 44
1.12
Selection overview
Types 11, 12, 13, 14, 16, 79
Constant hangers, heavy-duty constant supports
750
700
650
600
550
500
450
400
350
300
250
200
150
100
50
0
0.625
1.25
2.5
10
15
20
30
40
50
60
70
80
90
100
120
140
load [kN]
Selection
example:
24kN/210mm
Zwischenwerte
Intermediate
knnen
intervalues can
be
poliert
werden
interpolated.
...2..(150mm)
type designation
11 66
11 76
11 86
11 96
12 86
12 96
13 86
13 96
14 86
14 96
11 15
11 25
11 35
11 45
11 55
11 65
11 75
11 85
11 95
12 85
12 95
13 85
13 95
14 85
14 95
11 14
11 24
11 34
11 44
11 54
11 64
11 74
11 84
11 94
12 84
12 94
13 84
13 94
14 84
14 94
11 C3
11 D3
11 13
11 23
11 33
11 43
11 53
11 63
11 73
11 83
11 93
12 83
12 93
13 83
13 93
14 83
14 93
load [kN]
0.13 0.14
11 D2
0.25 0.27
11 12
0.54
0.50
11 22
1.08
1.00
11 32
2.17
2.00
11 42
4.33
4.00
11 52
8.67
8.00
11 62
16.00 17.33
11 72
24.00 26.00
11 82
32.00 34.66
11 92
40.00 43.33
12 82 64.00 69.33
12 92 80.00 86.66
13 82 96.00 104.00
13 92 120.00 130.00
14 82 128.00 138.70
14 92 160.00 173.30
0.15
0.29
0.58
1.17
2.33
4.66
9.33
18.66
28.00
37.33
46.66
74.66
93.30
112.00
140.00
149.30
186.70
0.16
0.31
0.63
1.25
2.50
5.00
10.00
20.00
30.00
40.00
50.00
80.00
100.00
120.00
150.00
160.00
200.00
0.17
0.33
0.67
1.33
2.67
5.33
10.67
21.33
32.00
42.66
53.33
85.33
106.70
128.00
160.00
170.70
213.30
0.18
0.35
0.71
1.42
2.83
5.66
11.33
22.66
34.00
45.33
56.66
90.66
113.30
136.00
170.00
181.30
226.70
0.19
0.38
0.75
1.50
3.00
6.00
12.00
24.00
36.00
48.00
60.00
96.00
120.00
144.00
180.00
192.00
240.00
0.20
0.40
0.79
1.58
3.17
6.33
12.67
25.33
38.00
50.66
63.33
101.30
126.70
152.00
190.00
202.70
253.30
0.21
0.42
0.83
1.66
3.33
6.66
13.33
26.66
40.00
53.33
66.66
106.66
133.30
160.00
200.00
213.30
266.70
0.22
0.44
0.88
1.75
3.50
7.00
14.00
28.00
42.00
56.00
70.00
112.00
140.00
168.00
210.00
224.00
280.00
140
145
150
145
140
135
130
125
120
250
240
135
...3..(300mm)
270
280
290
300
290
280
270
260
...4..(450mm)
405
420
435
450
435
420
405
390
375
360
...5..(600mm)
540
560
580
600
580
560
540
520
500
480
...6..(750mm)
675
700
725
750
725
700
675
650
625
600
1.13
150
100
50
0
60
80
100
125
150
175
200
225
250
275
300
325
350
375
400
500
600
load [kN]
load [kN]
type designation
0.23
0.46
0.92
1.83
3.67
7.33
14.67
29.33
44.00
58.66
73.33
117.30
146.70
176.00
220.00
234.70
293.30
0.24
0.48
0.96
1.92
3.83
7.66
15.33
30.66
46.00
61.33
76.66
122.66
153.30
184.00
230.00
245.30
306.70
0.25
0.50
1.00
2.00
4.00
8.00
16.00
32.00
48.00
64.00
80.00
128.00
160.00
192.00
240.00
256.00
320.00
0.26
0.52
1.04
2.08
4.17
8.33
16.67
33.33
50.00
66.66
83.33
133.30
166.70
200.00
250.00
266.70
333.30
0.27
0.54
1.08
2.16
4.33
8.66
17.33
34.66
52.00
69.33
86.66
138.66
173.30
208.00
260.00
277.30
346.70
0.28
0.56
1.13
2.25
4.50
9.00
18.00
36.00
54.00
72.00
90.00
144.00
180.00
216.00
270.00
288.00
360.00
0.29
0.58
1.17
2.33
4.67
9.33
18.67
37.33
56.00
74.66
93.33
149.30
186.70
224.00
280.00
298.70
373.30
0.30
0.60
1.21
2.42
4.83
9.66
19.33
38.66
58.00
77.33
96.66
154.66
193.30
232.00
290.00
309.30
386.60
0.31
0.63
1.25
2.50
5.00
10.00
20.00
40.00
60.00
80.00
100.00
160.00
200.00
240.00
300.00
320.00
400.00
0.37
0.73
1.45
2.91
5.83
11.66
23.33
46.66
70.00
93.33
116.66
186.66
233.33
280.00
350.00
373.35
466.65
0.42
0.83
1.66
3.33
6.66
13.33
26.66
53.33
80.00
106.66
133.33
213.33
266.66
320.00
400.00
426.70
533.30
11 D2
11 12
11 22
11 32
11 42
11 52
11 62
11 72
11 82
11 92
12 82
12 92
13 82
13 92
14 82
14 92
115
110
105
100
95
90
85
80
75
50
25
mm
230
220
210
200
190
180
170
160
150
100
50
mm
345
330
315
300
285
270
255
240
225
mm
460
440
420
400
380
360
340
320
300
mm
575
550
525
500
475
450
425
400
375
mm
11 C3
11 D3
11 13
11 23
11 33
11 43
11 53
11 63
11 73
11 83
11 93
12 83
12 93
13 83
13 93
14 83
14 93
11 14
11 24
11 34
11 44
11 54
11 64
11 74
11 84
11 94
12 84
12 94
13 84
13 94
14 84
14 94
11 15
11 25
11 35
11 45
11 55
11 65
11 75
11 85
11 95
12 85
12 95
13 85
13 95
14 85
14 95
11 66
11 76
11 86
11 96
12 86
12 96
13 86
13 96
14 86
14 96
1.14
Constant hangers
Type 11
B
D
X
E
d5
H
P
d6
Constant hangers
type 11 C3 19 to 11 96 15
Serialized standard design,
delivery from stock.
d2
X
d2
C
L
X = minimum engagement
depth. At the lower connection, maximum engagement
depth = X + 300mm.
Order details:
constant hanger
type 11 .. ..
marking:
calibration load: kN
travel: mm up/down
blocking position
(as required): mm
1.15
type
d2
d5
d6
11 C3 19
11 D2 19
11 D3 19
11 12 15
11 13 15
11 14 15
11 15 15
11 22 15
11 23 15
11 24 15
11 25 15
11 32 15
11 33 15
11 34 13
11 35 13
11 42 15
11 43 15
11 44 13
11 45 13
11 52 15
11 53 15
11 54 15
11 55 15
11 62 15
11 63 15
11 64 15
11 65 15
11 66 15
11 72 15
11 73 15
11 74 15
11 75 15
11 76 15
11 82 15
11 83 15
11 84 15
11 85 15
11 86 15
11 92 15
11 93 15
11 94 15
11 95 15
11 96 15
350
300
410
385
415
435
465
445
460
480
530
445
490
545
615
500
570
610
665
590
710
745
845
725
815
845
885
1145
780
850
1000
1160
1275
815
945
1110
1200
1260
865
1095
1240
1255
1305
130
110
130
130
130
130
135
160
160
160
165
170
170
185
190
185
185
185
190
230
230
230
230
275
275
275
275
280
300
300
300
305
305
320
320
320
320
325
350
350
350
355
355
150
155
170
140
140
140
150
180
185
185
195
190
190
210
220
220
220
220
240
270
270
285
285
335
335
345
345
345
380
380
400
400
400
390
390
400
420
420
435
435
455
455
455
105
86
106
106
106
106
108
132
132
132
136
132
132
150
155
150
150
150
155
190
190
190
190
230
230
230
230
232
252
252
252
256
256
256
256
256
256
260
276
276
276
280
280
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M20
M20
M20
M20
M24
M24
M24
M24
M30
M30
M30
M30
M30
M36
M36
M36
M36
M36
M42
M42
M42
M42
M42
M48
M48
M48
M48
M48
9
11
11
12
12
12
12
12
12
12
12
12
12
12
12
16
16
16
16
20
20
20
20
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
9
11
11
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M20
M20
M20
M20
M24
M24
M24
M24
M24
E
530
350
545
375
645
935
1225
385
650
945
1215
390
675
960
1240
440
740
1040
1285
470
770
1105
1405
555
900
1285
1630
2030
610
945
1375
1710
2150
705
1140
1645
2085
2585
760
1190
1735
2160
2700
H
455
250
445
265
445
615
795
270
455
635
810
275
470
645
820
315
495
675
855
345
515
705
880
420
565
750
925
1330
455
635
785
975
1425
585
715
925
1115
1625
630
785
960
1090
1620
250
230
260
285
285
285
295
350
360
360
370
360
360
370
370
400
410
410
420
490
490
490
490
580
580
600
600
600
650
650
650
660
660
650
650
670
690
690
750
750
770
770
770
40
0
45
25
20
25
25
20
45
45
25
10
70
40
40
25
110
55
65
30
105
75
60
40
160
150
120
155
50
140
195
65
210
50
215
305
125
250
50
250
380
250
290
265
195
280
135
270
325
450
140
270
320
460
165
260
370
465
260
250
370
540
210
285
410
530
240
300
355
460
650
285
300
400
665
710
330
340
390
740
850
350
355
380
585
800
240
125
255
40
165
225
350
45
195
245
365
30
180
260
360
135
210
275
455
70
215
310
415
85
260
310
380
600
110
205
360
490
675
115
280
420
595
825
135
325
480
570
820
43
43
43
86
86
86
86
86
86
86
86
112
110
110
110
105
105
105
105
115
126
126
135
145
145
149
149
149
170
170
179
184
184
200
200
200
200
200
195
195
195
195
195
weight
X [kg]
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
25
25
25
25
30
30
30
30
35
35
35
35
35
45
45
45
45
45
50
50
50
50
50
60
60
60
60
60
14
10
19
15
25
34
52
21
35
48
75
27
43
66
105
44
66
86
145
73
115
159
212
134
183
264
337
495
195
262
378
550
690
263
364
509
731
965
336
475
677
862
1130
detail Z
transportation lug
G1
K1
base plate
C
L
F
A1
constant bracket
h. type type
11 C3 19
11 D2 19
11 D3 19
11 12 15
11 13 15
11 14 15
11 15 15
11 22 15
11 23 15
11 24 15
11 25 15
11 32 15
11 33 15
11 34 13
11 35 13
11 42 15
11 43 15
11 44 13
11 45 13
11 52 15
11 53 15
11 54 15
11 55 15
11 62 15
11 63 15
11 64 15
11 65 15
11 66 15
11 72 15
11 73 15
11 74 15
11 75 15
11 76 15
11 82 15
11 83 15
11 84 15
11 85 15
11 86 15
11 92 15
11 93 15
11 94 15
11 95 15
11 96 15
71 C3 .1
71 D2 .1
71 D3 .1
71 12 .1
71 13 .1
71 14 .1
71 15 .1
71 22 .1
71 23 .1
71 24 .1
71 25 .1
71 32 .1
71 33 .1
71 34 .1
71 35 .1
71 42 .1
71 43 .1
71 44 .1
71 45 .1
71 52 .1
71 53 .1
71 54 .1
71 55 .1
71 62 .1
71 63 .1
71 64 .1
71 65 .1
71 66 .1
71 72 .1
71 73 .1
71 74 .1
71 75 .1
71 76 .1
71 82 .1
71 83 .1
71 84 .1
71 85 .1
71 86 .1
71 92 .1
71 93 .1
71 94 .1
71 95 .1
71 96 .1
B1
A1
B1
E
G1
K1
weight
[kg]
420
370
480
495
525
545
575
575
590
610
660
575
620
655
725
640
710
750
805
750
870
905
1005
915
1005
1035
1075
1335
980
1050
1200
1360
1475
1025
1155
1320
1410
1470
1105
1335
1480
1495
1545
70
70
70
115
115
115
115
140
140
140
140
140
140
140
140
160
160
160
160
200
200
200
200
250
250
250
250
250
270
270
270
270
270
280
280
300
320
320
300
300
320
340
340
150
155
170
140
140
140
150
180
185
185
195
190
190
210
220
220
220
220
240
270
270
285
285
335
335
345
345
345
380
380
400
400
400
390
390
400
420
420
435
435
455
455
455
265
145
265
145
265
385
505
145
265
385
505
150
270
400
520
155
275
425
600
160
280
400
520
165
285
405
525
345
175
295
415
535
280
180
300
420
540
270
190
310
430
550
260
40
40
40
60
60
60
60
75
75
75
75
75
75
75
75
80
80
80
80
90
90
90
90
110
110
110
110
110
115
115
115
115
115
120
120
120
120
120
140
140
140
140
140
810
510
825
535
925
1335
1745
545
930
1345
1735
560
965
1380
1780
620
1040
1490
1910
660
1080
1535
1955
755
1220
1725
2190
2410
830
1285
1835
2290
2475
935
1490
2115
2675
2905
1010
1560
2225
2770
3020
355
260
380
270
480
720
950
275
475
710
925
285
495
735
960
305
545
815
1055
315
565
830
1075
335
655
975
1265
1080
375
650
1050
1315
1050
350
775
1190
1560
1280
380
775
1265
1680
1400
250
230
260
285
285
285
295
350
360
360
370
360
360
370
370
400
410
410
420
490
490
490
490
580
580
600
600
600
650
650
650
660
660
650
650
670
690
690
750
750
770
770
770
6
6
6
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
60
60
60
100
100
100
100
120
120
120
120
120
120
120
120
140
140
140
140
180
180
180
180
220
220
220
220
220
240
240
240
240
240
240
240
260
280
280
260
260
280
320
320
13
13
13
17
17
17
17
17
17
17
17
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
40
40
40
40
40
40
40
40
40
40
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
8
12
17
25
31
15
21
31
38
16
23
32
40
18
29
41
49
30
42
58
72
45
62
90
112
112
56
80
106
128
128
65
91
139
184
184
82
109
162
273
273
Order details:
constant hangers
type 11 .. ..
with support bracket
type 71 .. ..
marking: ...
calibration load: kN
travel: mm up/down
blocking position
(as required): mm
1.16
Constant hangers
Types 12-14
Constant hangers
type 12 82 35 to 14 96 35
Standard design, multi-cell
arrangement, delivery from
stock.
R1
B
D
m
ax
d3
70
RW
+ 250
H
P
O W
ma
x
d3
R1
L
C
N
M
Dimension E applies to
upper blocking position,
in other blocking positions
E changes accordingly.
Order details:
constant hangers
type 1. .. 35
marking: ...
calibration load: kN
travel: mm up/down
blocking position
(as required): mm
1.17
type
d3
E
12 82 35
12 83 35
12 84 35
12 85 35
12 86 35
12 92 35
12 93 35
12 94 35
12 95 35
12 96 35
13 82 35
13 83 35
13 84 35
13 85 35
13 86 35
13 92 35
13 93 35
13 94 35
13 95 35
13 96 35
14 82 35
14 83 35
14 84 35
14 85 35
14 86 35
14 92 35
14 93 35
14 94 35
14 95 35
14 96 35
860
990
1155
1245
1305
910
1140
1285
1300
1350
860
990
1155
1245
1305
910
1140
1285
1300
1350
860
990
1155
1245
1305
910
1140
1285
1300
1350
635
635
635
635
645
695
695
695
705
705
935
935
935
935
950
1025
1025
1025
1040
1040
1235
1235
1235
1235
1250
1355
1355
1355
1375
1375
390
390
400
420
420
435
435
455
455
455
390
390
400
420
420
435
435
455
455
455
390
390
400
420
420
435
435
455
455
455
555
555
555
555
565
605
605
605
615
615
855
855
855
855
870
935
935
935
950
950
1155
1155
1155
1155
1170
1265
1265
1265
1280
1280
60
60
60
60
60
70
70
70
70
70
70
70
70
70
70
80
80
80
80
80
80
80
80
80
80
90
90
90
90
90
1205
1640
2145
2585
3085
1310
1740
2285
2710
3250
1305
1740
2245
2685
3185
1420
1850
2395
2820
3360
1385
1820
2325
2765
3265
1460
1890
2435
2860
3400
585
715
925
1115
1625
630
785
960
1090
1620
585
715
925
1115
1625
630
785
960
1090
1620
585
715
925
1115
1625
630
785
960
1090
1620
80
80
80
80
80
90
90
90
90
90
80
80
80
80
80
90
90
90
90
90
80
80
80
80
80
90
90
90
90
90
540
540
540
540
545
590
590
590
595
595
840
840
840
840
850
920
920
920
930
930
1140
1140
1140
1140
1150
1250
1250
1250
1260
1260
300
300
300
300
304
330
330
330
334
334
2x300
2x300
2x300
2x300
2x304
2x330
2x330
2x330
2x334
2x334
3x300
3x300
3x300
3x300
3x304
3x330
3x330
3x330
3x334
3x334
50
215
305
125
250
50
250
380
250
290
50
215
305
125
250
50
250
380
250
290
50
215
305
125
250
50
250
380
250
290
330
340
390
740
850
350
355
380
585
800
330
340
390
740
850
350
355
380
585
800
330
340
390
740
850
350
355
380
585
800
90
90
90
90
90
105
105
105
105
105
105
105
105
105
105
120
120
120
120
120
120
120
120
120
120
135
135
135
135
135
R1max
95
95
95
95
95
110
110
110
110
110
125
125
125
125
125
140
140
140
140
140
180
180
180
180
180
180
180
180
180
180
weight
[kg]
30
30
30
30
30
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
40
40
40
40
40
160
160
160
160
160
175
175
175
175
175
210
210
210
210
210
230
230
230
230
230
250
250
250
250
250
250
250
250
250
250
615
820
1110
1555
2020
785
1070
1475
1845
2380
955
1265
1700
2370
3070
1215
1640
2245
2810
3615
1305
1715
2300
3190
4125
1665
2230
3040
3790
4870
transportation lug
K
1
E
G1
G2 + 250
70
detail Z
C
A1
constant
h. type
bracket
type
A1
B1
12 82 35
12 83 35
12 84 35
12 85 35
12 86 35
12 92 35
12 93 35
12 94 35
12 95 35
12 96 35
13 82 35
13 83 35
13 84 35
13 85 35
13 86 35
13 92 35
13 93 35
13 94 35
13 95 35
13 96 35
14 82 35
14 83 35
14 84 35
14 85 35
14 86 35
14 92 35
14 93 35
14 94 35
14 95 35
14 96 35
71 82 .2
71 83 .2
71 84 .2
71 85 .2
71 86 .2
71 92 .2
71 93 .2
71 94 .2
71 95 .2
71 96 .2
71 82 .3
71 83 .3
71 84 .3
71 85 .3
71 86 .3
71 92 .3
71 93 .3
71 94 .3
71 95 .3
71 96 .3
71 82 .4
71 83 .4
71 84 .4
71 85 .4
71 86 .4
71 92 .4
71 93 .4
71 94 .4
71 95 .4
71 96 .4
1025
1155
1320
1410
1470
1105
1335
1480
1495
1545
1025
1155
1320
1410
1470
1105
1335
1480
1495
1545
1025
1155
1320
1410
1470
1105
1335
1480
1495
1545
580
580
600
620
620
630
630
650
675
675
880
880
900
920
920
960
960
980
1010
1010
1180
1180
1200
1220
1230
1290
1290
1310
1340
1340
Z
B1
E
390
390
400
420
420
435
435
455
455
455
390
390
400
420
420
435
435
455
455
455
390
390
400
420
420
435
435
455
455
455
180
300
420
540
270
190
310
430
550
260
180
300
420
540
270
190
310
430
550
260
180
300
420
540
270
190
310
430
550
260
120
120
120
120
120
140
140
140
140
140
120
120
120
120
120
140
140
140
140
140
120
120
120
120
120
140
140
140
140
140
G1
G2
K1
985
1540
2175
2730
2960
1070
1615
2285
2830
3080
985
1550
2175
2730
2960
1070
1620
2285
2830
3080
990
1550
2175
2730
2960
1075
1620
2285
2830
3080
1095
1530
2040
2480
2980
1190
1620
2170
2595
3135
1145
1585
2090
2530
3030
1245
1680
2225
2650
3190
1190
1625
2130
2570
3070
1270
1700
2245
2670
3210
350
775
1190
1560
1280
380
775
1265
1680
1400
350
775
1190
1560
1280
380
775
1265
1680
1400
350
775
1190
1560
1280
380
775
1265
1680
1400
300
300
300
300
304
330
330
330
334
334
300
300
300
300
304
330
330
330
334
334
300
300
300
300
304
330
330
330
334
334
15
15
15
15
15
20
20
20
20
20
15
15
15
15
15
20
20
20
20
20
15
15
15
15
15
20
20
20
20
20
240
240
260
280
280
260
260
280
320
320
240
240
260
280
280
260
260
280
320
320
240
240
260
280
280
260
260
280
320
320
300
300
300
300
304
330
330
330
334
334
600
600
600
600
608
660
660
660
668
668
900
900
900
900
912
990
990
990
1002
1002
weight
[kg]
4
142
4
194
4
292
4
383
4
383
5
181
5
235
5
341
5
574
5
574
4
216
4
294
4
440
4
576
4
576
5
276
5
357
5
515
5
864
5
864
4
289
4
392
4
587
4
769
4
770
5
369
5
477
5
687
5 1153
5 1155
Order details:
constant hangers
type 1. .. ..
with support bracket
type 71 .. ..
marking: ...
calibration load: kN
travel: mm up/down
blocking position
(as required): mm
1.18
Constant hangers
Type 18
A
d3
R
H
position right at top in
other blocking positions
E lengthens accordingly.
X = minimum engagement
depth. At lower connection
max. engagement depth =
X + 150mm.
Max. permissible stresses:
Emergency (HZ) at 80C
= Calibration load x 1.33
Faulted condition (HS)
at 150C = Calibration
load x 1.66
Order details:
constant hangers
type 18 .. ..
marking: ...
calibration load: kN
travel: mm up/down
blocking position
(as required): mm
1.19
type
min. max.
load load
[kN] [kN] travel
18 D3 17 0.21 0.51
18 D1 27 0.21 0.72
18 D2 27 0.21 0.72
18 D3 27 0.37 0.72
18 11 27 0.54 1.71
18 12 27 0.54 1.71
18 13 27 0.54 1.71
18 21 17 1.25
3.0
18 22 17 1.25
3.0
18 23 17 1.25
3.0
18 21 27
2.2
4.0
18 22 27
2.2
4.0
18 23 27
2.2
4.0
18 31 17
2.8 5.15
18 32 17
2.8 5.15
18 33 17
2.8 5.15
18 31 27
3.8
6.8
18 32 27
3.8
6.8
18 33 27
3.8
6.8
18 41 17
5.0
9.3
18 42 17
5.0
9.3
18 43 17
5.0
9.3
18 41 27
6.9 12.4
18 42 27
6.9 12.4
18 43 27
6.9 12.4
18 51 17
9.2 16.2
18 52 17
9.2 16.2
18 53 17
9.2 16.2
18 51 27 11.9 21.9
18 52 27 11.9 21.9
18 53 27 11.9 21.9
18 61 17 16.15 29.9
18 62 17 16.15 29.9
18 63 17 16.15 29.9
18 61 27 22.1 40.5
18 62 27 22.1 40.5
18 63 27 22.1 40.5
18 71 17 29.8 47.0
18 72 17 29.8 47.0
18 73 17 29.8 47.0
18 71 27 35.0 60.0
18 72 27 35.0 60.0
18 73 27 35.0 60.0
18 81 17 44.2 80.0
18 82 17 44.2 80.0
18 83 17 44.2 80.0
18 91 17 59.0 100.0
18 92 17 59.0 100.0
18 93 17 59.0 100.0
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
d2
Dimension E in blocking
Constant hangers
type 18 D3 17 to 18 93 17
Standard design,
delivery from stock.
d2
d3
E
X
weight
[kg]
973
610
664
973
610
664
973
610
664
973
610
664
973
652
837
1099
652
837
1099
755
934
1099
755
934
1288
755
934
1288
812
1055
1426
878
1140
1592
878
1302
1720
976
1446
1720
1072
1570
1935
1251
1805
1965
1520
1805
1965
205
205
205
205
205
205
205
205
205
205
205
205
205
205
233
233
205
233
233
233
261
233
233
261
261
233
261
261
261
276
276
261
291
291
261
278
302
276
291
302
291
302
362
302
362
347
302
362
347
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
M20
M20
M20
M20
M20
M20
M24
M24
M24
M24
M24
M24
M30
M30
M30
M30
M30
M30
M36
M36
M36
M36
M36
M36
M42
M42
M42
M48
M48
M48
17
17
17
17
17
17
17
17
17
17
17
17
17
21
21
21
21
21
21
21
21
21
25
25
25
25
25
25
25
25
25
34
34
34
41
41
41
41
41
41
41
41
41
51
51
51
51
51
51
464
267
304
464
267
304
464
267
304
464
267
304
464
282
336
483
282
336
483
328
351
482
331
354
500
330
353
499
334
372
508
358
380
514
368
392
527
395
398
578
417
425
571
462
486
621
457
486
621
430
234
270
430
234
270
430
234
270
430
234
270
430
244
293
440
244
293
440
286
302
440
286
302
455
286
302
455
290
315
460
315
333
467
315
335
472
340
343
472
362
370
513
390
413
547
385
413
547
25
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
40
50
50
50
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
18
18
18
20
20
20
20
20
20
22
22
22
25
25
25
25
25
25
24
24
24
24
24
24
24
24
24
24
24
24
24
36
36
36
36
36
36
36
36
36
32
32
32
32
32
32
32
34
34
34
34
34
44
44
44
44
44
44
44
44
44
64
64
64
64
64
64
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
25
25
25
25
25
25
30
30
30
30
30
30
35
35
35
35
35
35
45
45
45
45
45
45
50
50
50
60
60
60
52
30
34
52
31
35
57
32
39
57
32
39
58
36
74
97
36
74
98
69
102
104
70
113
152
71
114
153
96
159
210
115
190
261
118
194
326
158
230
341
190
296
498
269
482
691
316
484
719
Constant supports
Type 19
A
Constant supports
type 19 D3 17 to 19 93 17
Standard design,
delivery from stock.
K
L1
d4
M
A1
type
19 D3 17
19 D1 27
19 D2 27
19 D3 27
19 11 27
19 12 27
19 13 27
19 21 17
19 22 17
19 23 17
19 21 27
19 22 27
19 23 27
19 31 17
19 32 17
19 33 17
19 31 27
19 32 27
19 33 27
19 41 17
19 42 17
19 43 17
19 41 27
19 42 27
19 43 27
19 51 17
19 52 17
19 53 17
19 51 27
19 52 27
19 53 27
19 61 17
19 62 17
19 63 17
19 61 27
19 62 27
19 63 27
19 71 17
19 72 17
19 73 17
19 71 27
19 72 27
19 73 27
19 81 17
19 82 17
19 83 17
19 91 17
19 92 17
19 93 17
N
B1
min. max.
load load
[kN] [kN] travel
0.21 0.51
0.21 0.72
0.21 0.72
0.37 0.72
0.54 1.71
0.54 1.71
0.54 1.71
1.25
3.0
1.25
3.0
1.25
3.0
2.2
4.0
2.2
4.0
2.2
4.0
2.8 5.15
2.8 5.15
2.8 5.15
3.8
6.8
3.8
6.8
3.8
6.8
5.0
9.3
5.0
9.3
5.0
9.3
6.9 12.4
6.9 12.4
6.9 12.4
9.2 16.2
9.2 16.2
9.2 16.2
11.9 21.9
11.9 21.9
11.9 21.9
16.15 29.9
16.15 29.9
16.15 29.9
22.1 40.5
22.1 40.5
22.1 40.5
29.8 47.0
29.8 47.0
29.8 47.0
35.0 60.0
35.0 60.0
35.0 60.0
44.2 80.0
44.2 80.0
44.2 80.0
59.0 100.0
59.0 100.0
59.0 100.0
Order details:
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
A1
B1
d4
E
973
610
664
973
610
664
973
610
664
973
610
664
973
652
837
1099
652
837
1099
755
934
1099
755
934
1288
755
934
1288
812
1055
1426
878
1140
1592
878
1302
1720
976
1446
1720
1072
1570
1935
1251
1805
1965
1520
1805
1965
245
245
245
245
245
245
245
245
245
245
245
245
245
245
300
300
245
300
300
300
300
300
300
300
300
300
300
300
300
400
400
300
400
400
300
400
400
400
400
380
398
400
400
400
400
400
400
400
400
205
205
205
205
205
205
205
205
205
205
205
205
205
205
233
233
205
233
233
233
261
233
233
261
261
233
261
261
261
276
276
261
291
291
261
278
302
276
291
302
291
302
362
302
362
347
302
362
347
163
163
163
163
163
163
163
163
163
163
163
163
163
163
189
189
163
189
189
189
205
189
189
205
205
189
205
205
205
220
220
205
233
233
205
220
240
220
233
240
233
240
300
240
300
285
240
300
285
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
14.5
18.5
18.5
14.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
22.5
22.5
18.5
22.5
22.5
18.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
22.5
913
490
600
913
490
600
913
490
600
913
490
600
913
499
639
969
499
639
969
565
667
969
565
667
987
577
668
987
581
713
1016
607
718
1021
607
717
1041
655
728
1041
672
757
1111
744
829
1186
739
829
1186
430
234
270
430
234
270
430
234
270
430
234
270
430
244
293
440
244
293
440
286
302
440
286
302
455
286
302
455
290
315
460
315
333
467
315
335
472
340
343
472
362
370
513
390
413
547
385
413
547
K
80
80
80
80
80
80
80
80
80
80
80
80
80
80
100
100
80
100
100
100
100
100
100
100
100
100
100
100
100
120
120
100
120
120
100
120
120
120
120
120
120
120
120
120
120
120
120
120
120
weight
[kg]
185
185
185
185
185
185
185
185
185
185
185
185
185
185
210
210
185
210
210
210
210
210
210
210
210
210
210
210
210
280
280
210
280
280
210
280
280
280
280
260
278
280
280
280
280
280
280
280
280
103
103
103
103
103
103
103
103
103
103
103
103
103
103
124
124
103
124
124
124
140
124
124
140
140
124
140
140
140
150
150
140
163
163
140
150
170
150
163
170
163
170
230
170
230
215
170
230
215
60
36
41
60
37
42
65
37
46
65
38
46
66
42
83
110
43
83
111
78
113
116
78
123
171
82
128
171
107
176
231
127
208
282
129
211
354
176
251
368
208
316
524
290
515
740
336
516
767
Dimension E in blocking
position right at top in other
blocking positions E shortens
accordingly and allows adjustment of + 60mm.
L1
40
40
40
65
65
65
110
150
150
150
1.20
Dimension E on blocking
position right at top, in other
blocking positions E shortens
accordingly and allows adjustment of +200mm.
Connection possibilities:
See bolt diameter of weld-on
brackets type 35 or dynamic
clamps (Product Group 3).
Max. permissible stresses:
Emergency (HZ) at 80C
= Calibration load x 1.33
Faulted condition (HS)
at 150C = Calibration
load x 1.66
Max. blocking load at 80C
= Calibration load x 1.5.
Order details:
angulating constant
support type 19 .. ..
marking:
calibration load: kN
travel: mm up/down
blocking position
(as required): mm
1.21
d3
B1
A1
type
SW
min. max.
load load
[kN] [kN] travel
19 D3 37 0.21 0.51
19 D1 47 0.21 0.72
19 D2 47 0.21 0.72
19 D3 47 0.37 0.72
19 11 47 0.54 1.71
19 12 47 0.54 1.71
19 13 47 0.54 1.71
19 21 37 1.25
3.0
19 22 37 1.25
3.0
19 23 37 1.25
3.0
19 21 47
2.2
4.0
19 22 47
2.2
4.0
19 23 47
2.2
4.0
19 31 37
2.8 5.15
19 32 37
2.8 5.15
19 33 37
2.8 5.15
19 31 47
3.8
6.8
19 32 47
3.8
6.8
19 33 47
3.8
6.8
19 41 37
5.0
9.3
19 42 37
5.0
9.3
19 43 37
5.0
9.3
19 41 47
6.9 12.4
19 42 47
6.9 12.4
19 43 47
6.9 12.4
19 51 37
9.2 16.2
19 52 37
9.2 16.2
19 53 37
9.2 16.2
19 51 47 11.9 21.9
19 52 47 11.9 21.9
19 53 47 11.9 21.9
19 61 37 16.15 29.9
19 62 37 16.15 29.9
19 63 37 16.15 29.9
19 61 47 22.1 40.5
19 62 47 22.1 40.5
19 63 47 22.1 40.5
19 71 37 29.8 47.0
19 72 37 29.8 47.0
19 73 37 29.8 47.0
19 71 47 35.0 60.0
19 72 47 35.0 60.0
19 73 47 35.0 60.0
19 81 37 44.2 80.0
19 82 37 44.2 80.0
19 83 37 44.2 80.0
19 91 37 59.0 100.0
19 92 37 59.0 100.0
19 93 37 59.0 100.0
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
A1
B1
d3
E
SW
weight
[kg]
973
610
664
973
610
664
973
610
664
973
610
664
973
652
837
1099
652
837
1099
755
934
1099
755
934
1288
755
934
1288
812
1055
1426
878
1140
1592
878
1302
1720
976
1446
1720
1072
1570
1935
1251
1805
1965
1520
1805
1965
245
245
245
245
245
245
245
245
245
245
245
245
245
245
300
300
245
300
300
300
290
300
300
290
290
300
290
290
290
400
400
300
400
400
300
400
400
400
400
380
398
400
400
400
400
400
400
400
400
205
205
205
205
205
205
205
205
205
205
205
205
205
205
233
233
205
233
233
233
261
233
233
261
261
233
261
261
261
276
276
261
291
291
261
278
302
276
291
302
291
302
362
302
362
347
302
362
347
163
163
163
163
163
163
163
163
163
163
163
163
163
163
189
189
163
189
189
189
205
189
189
205
205
189
205
205
205
220
220
205
220
220
205
220
220
220
233
240
233
240
300
240
300
285
240
300
285
10
10
10
10
10
10
10
12
12
12
12
12
12
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
30
30
30
30
30
30
30
30
30
50
50
50
903
480
590
903
480
590
903
490
600
913
490
600
913
512
632
965
512
632
965
561
663
965
561
663
982
609
700
1020
613
727
1030
641
732
1035
641
731
1058
708
781
1094
725
810
1156
789
881
1238
812
904
1261
45
45
45
45
45
45
45
53
53
53
53
53
53
59
59
59
59
59
59
59
59
59
59
59
59
80
80
80
80
80
80
80
80
80
80
80
80
93
93
93
93
93
93
93
93
93
106
106
106
430
234
270
430
234
270
430
234
270
430
234
270
430
244
293
440
244
293
440
286
302
440
286
302
455
286
302
455
290
315
460
315
333
467
315
335
472
340
343
472
362
370
513
390
413
547
385
413
547
27
27
27
27
27
27
27
34
34
34
34
34
34
36
36
36
36
36
36
36
36
36
36
36
36
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
70
70
70
23
23
23
23
23
23
23
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
40
40
40
40
60
60
60
60
60
60
60
60
60
70
70
70
58
35
40
58
35
40
63
36
44
64
36
44
64
41
81
108
41
81
108
76
111
114
76
122
169
83
129
172
109
178
232
129
209
283
132
212
355
179
255
374
212
320
534
291
523
747
341
528
778
d3
B1
type
79 D3 17
79 D1 27
79 D2 27
79 D3 27
79 11 27
79 12 27
79 13 27
79 21 17
79 22 17
79 23 17
79 21 27
79 22 27
79 23 27
79 31 17
79 32 17
79 33 17
79 31 27
79 32 27
79 33 27
79 41 17
79 42 17
79 43 17
79 41 27
79 42 27
79 43 27
79 51 17
79 52 17
79 53 17
79 51 27
79 52 27
79 53 27
79 61 17
79 62 17
79 63 17
79 61 27
79 62 27
79 63 27
79 71 17
79 72 17
79 73 17
79 71 27
79 72 27
79 73 27
79 81 17
79 82 17
79 83 17
79 91 17
79 92 17
79 93 17
0.42
0.42
0.42
0.74
1.08
1.08
1.08
2.5
2.5
2.5
4.4
4.4
4.4
5.6
5.6
5.6
7.6
7.6
7.6
10
10
10
13.8
13.8
13.8
18.4
18.4
18.4
23.8
23.8
23.8
32.3
32.3
32.3
44.2
44.2
44.2
59.6
59.6
59.6
70
70
70
88.4
88.4
88.4
118
118
118
1.02
1.44
1.44
1.44
3.42
3.42
3.42
6.0
6.0
6.0
8.0
8.0
8.0
10.3
10.3
10.3
13.6
13.6
13.6
18.6
18.6
18.6
24.8
24.8
24.8
32.4
32.4
32.4
43.8
43.8
43.8
59.8
59.8
59.8
81
81
81
94
94
94
120
120
120
160
160
160
200
200
200
min. max.
load load
[kN] [kN] travel Lmax
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
75
150
300
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
1800
1800
1800
1800
1800
1800
A
973
610
664
973
610
664
973
610
664
973
610
664
973
652
837
1099
652
837
1099
755
934
1099
755
934
1288
755
934
1288
812
1055
1426
878
1140
1592
878
1302
1720
976
1446
1720
1072
1570
1935
1251
1805
1965
1520
1805
1965
d3
205
205
205
205
205
205
205
205
205
205
205
205
205
205
233
233
205
233
233
233
261
233
233
261
261
233
261
261
261
276
276
261
291
291
261
278
302
276
291
302
291
302
362
302
362
347
302
362
347
17
17
17
17
17
17
17
17
17
17
17
17
17
21
21
21
21
21
21
21
21
21
25
25
25
25
25
25
25
25
25
34
34
34
41
41
41
41
41
41
41
41
41
51
51
51
51
51
51
E
569
372
409
569
393
430
590
393
430
590
393
430
590
410
464
611
410
464
611
472
488
626
475
491
644
489
512
658
493
521
667
521
544
678
531
556
690
586
589
769
607
617
762
677
702
836
694
725
859
25
25
25
25
25
25
25
25
25
25
25
25
25
30
30
30
30
30
30
30
30
30
40
40
40
40
40
40
40
40
40
50
50
50
65
65
65
65
65
65
65
65
65
80
80
80
80
80
80
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
18
18
18
20
20
20
20
20
20
22
22
22
25
25
25
25
25
25
80
80
80
80
80
80
80
80
80
80
80
80
80
120
120
120
120
120
120
140
140
140
140
140
140
180
180
180
180
180
180
260
260
260
260
260
260
300
300
300
300
300
300
300
300
300
300
300
300
weight for
type 79 D3 17 to 79 93 17
L=1000 per 100mm
B1
[kg]
[kg]
140
121
1.7
Dimension E right at top in
140
140
140
140
140
140
140
140
140
140
140
140
190
190
190
190
190
190
200
200
200
200
200
200
230
230
230
230
230
230
310
310
310
310
310
310
350
350
350
350
350
350
350
350
350
350
350
350
79
87
121
79
87
131
79
93
131
79
93
133
100
176
222
100
176
224
172
238
242
174
260
338
190
276
354
240
366
468
312
460
604
318
470
736
418
562
780
482
694
1098
644
1070
1486
730
1066
1538
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
1.7
2.7
2.7
2.7
2.7
2.7
2.7
3.2
3.2
3.2
3.2
3.2
3.2
4.4
4.4
4.4
4.4
4.4
4.4
7.6
7.6
7.6
7.6
7.6
7.6
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
9.2
lengthened to 2400mm, on
reduction of the permissible
center load by 5% per 100mm
extension.
Order details:
trapeze type 79 .. ..
L = mm
marking:
calibration load: kN
of the support point
trave: mm up/down
blocking position
(as required): mm
1.22
G
D
L
A
Order details:
trapeze type 79 .. ..
L = mm
Z = mm
marking:
calibration load: kN
of the support point
travel: mm up/down
blocking position
(as required): mm
1.23
type
Amax
79 D2 15
79 D3 15
79 12 15
79 13 15
79 22 15
79 23 15
79 32 15
79 33 15
79 34 13
79 35 13
79 42 15
79 43 15
79 44 13
79 45 13
79 52 15
79 53 15
79 54 15
79 55 15
79 62 15
79 63 15
79 64 15
79 65 15
79 66 15
79 72 15
79 73 15
79 74 15
79 75 15
79 76 15
79 82 15
79 83 15
79 84 15
79 85 15
79 86 15
79 92 15
79 93 15
79 94 15
79 95 15
79 96 15
1210
1230
1930
1930
1960
1960
2170
2170
2170
2170
2185
2185
2185
2190
2330
2330
2330
2330
2375
2375
2375
2375
2380
2400
2400
2400
2405
2405
2420
2420
2420
2420
2425
2450
2450
2450
2455
2455
325
435
515
545
575
590
605
650
700
775
640
710
750
805
740
860
895
1005
895
985
1015
1055
1315
970
1040
1200
1360
1475
1015
1145
1310
1400
1460
1065
1295
1440
1455
1505
C
365
560
390
660
400
665
410
695
960
1240
465
765
1040
1285
500
800
1135
1435
590
935
1320
1665
2065
655
990
1420
1755
2195
755
1190
1695
2135
2635
820
1250
1795
2220
2760
D
110
130
130
130
160
160
170
170
185
190
185
185
185
190
230
230
230
230
275
275
275
275
280
300
300
300
305
305
320
320
320
320
325
350
350
350
355
355
E
Lmax
X
180
245
235
380
240
355
235
370
560
735
190
415
625
685
275
420
660
845
315
480
815
1085
1265
320
560
820
1020
1275
380
650
1015
1275
1545
430
665
1055
1395
1680
15
15
30
30
30
30
45
45
45
45
55
55
55
55
65
65
65
65
70
70
70
70
70
85
85
85
85
85
95
95
95
95
95
100
100
100
100
100
1100
1100
1800
1800
1800
1800
2000
2000
2000
2000
2000
2000
2000
2000
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
15
15
15
15
15
15
20
20
20
20
25
25
25
25
30
30
30
30
35
35
35
35
35
45
45
45
45
45
50
50
50
50
50
60
60
60
60
60
6.6
6.6
23.8
23.8
23.8
23.8
36.4
36.4
36.4
36.4
44.0
44.0
44.0
44.0
50.6
50.6
50.6
58.8
66.4
66.4
66.4
66.4
66.4
83.6
83.6
92.4
92.4
92.4
119.0
119.0
119.0
119.0
119.0
119.0
119.0
119.0
119.0
119.0
B
D
C
E
H
P
A
L
N
F
Z
B1
M
A1
33
type
A A1
16 82 29 860 640
16 83 29 990 640
16 92 29 910 740
16 93 29 1140 740
16 82 39 860 640
16 83 39 990 640
16 92 39 910 740
16 93 39 1140 740
16 82 49 860 640
16 83 49 990 640
16 92 49 910 740
16 93 49 1140 740
B
635
635
695
695
935
935
1025
1025
1235
1235
1355
1355
B1
580
580
630
630
880
880
960
960
1180
1180
1290
1290
C
500
500
570
570
800
800
900
900
1100
1100
1230
1230
D
555
555
605
605
855
855
935
935
1155
1155
1265
1265
E
1120
1855
1190
1915
1120
1855
1190
1915
1120
1855
1190
1915
E
1132
1867
1202
1927
1132
1867
1202
1927
1132
1867
1202
1927
F
120
120
140
140
120
120
140
140
120
120
140
140
H
585
715
630
785
585
715
630
785
585
715
630
785
K
300
755
320
745
300
755
320
745
300
755
320
745
L
200
200
240
240
200
200
240
240
200
200
240
240
M
490
490
570
570
490
490
570
570
490
490
570
570
N
300
300
330
330
300
300
330
330
300
300
330
330
50
215
50
250
50
215
50
250
50
215
50
250
330
340
350
355
330
340
350
355
330
340
350
355
15
15
20
20
15
15
20
20
15
15
20
20
15
15
20
20
15
15
20
20
15
15
20
20
300
300
330
330
600
600
660
660
900
900
990
990
weight
[kg]
635
920
805
1165
965
1395
1220
1765
1295
1865
1635
2365
E
Order details:
constant support
type 16 .. ..
marking:
calibration load: kN
travel: mm up/down
blocking position
(as required): mm
slide plate (as required):
1.24
Servohangers
Type 17
Under certain conditions,
pipe systems or other
components are restricted
in their thermal displacement through friction or
other influences, despite
the use of spring and constant hangers or constant
supports. In such cases
servohangers can actively
overcome the restriction.
Application
In standard cases, the weight of the pipe systems
is practically in equilibrium with the calibration
load of the constant hangers and constant
supports. The sum of the deviations occurring
and the additional stresses in the piping due to
this then remain within the permissible harmless range.
In certain cases, the sum of the deviations
occurring can also exceed a permissible level
and considerably reduce the life of the piping
systems or their connections (in the creep
strength range) in the form of additional secondary stresses.
Deviations can arise through:
ine
turb
hot position
1.25
boi
ler
cen
ter
ine
turb
For theoretical (temp.) / actual (travel) deviations a tolerance range can be set. If the
deviation is outside these values, the control
switches off automatically.
Manual switch-off
For any maintenance work required on the
system or the boiler, the servo support can
be switched on or off manually.
Design sizes
Load Groups 5 (FN 20kN) to 9 (FN 100kN) with
travel ranges 2 (150mm) and 3 (300mm) are
considered standard. For other cases, special
designs can be supplied.
Operating instructions
Installation and commissioning instructions, as
well as servicing recommendations, are included
in the scope of supply.
2 = travel range 2
3 = travel range 3
servohanger
type
17 5. 15
17 6. 15
17 7. 15
17 8. 15
17 9. 15
nom. load
FN [kN]
20
40
60
80
100
set load
[kN]
8 20
16 40
24 60
32 80
40 100
load-dependent travel
travel range 2 travel range 3
[mm]
[mm]
75 150
150 300
75 150
150 300
75 150
150 300
75 150
150 300
75 150
150 300
supplementary
servo power [kN]
8
20
20
20
20
Electrohydraulic control
The hydraulic unit and the control are located
separately from each other in a separate switch
cabinet situated near the servohanger (max.
distance 16m).
hydr.
control
electr.
control
The hydraulic pistons for control of the movement are located in the load tube of the
constant hanger.
Safety switch
The electrohydraulic control is so designed that
in the event of an operational breakdown (e.g.
power loss) only the servo support is lost, but
the unit will continue to function effectively as
a constant hanger.
Function chart
1.26
2 Delivery condition
stop
If not otherwise agreed, LISEGA constant hangguide bolt
ers are set to the desired cold load position
name plate
red marking for
hot position
retaining screw with
washer for stop (after
deblocking)
travel scale
blocking strip
indicator for
calibration load
load scale
load adjustment screw
load tube
inspection hole for
min. engagement depth
Constant hanger type 11
lock nut
(installation condition) and blocked. The adjustment values can be read off the load and travel
scale as well as the name plate.
On the travel scale the theoretical hot position
is marked with a red sticker and the theoretical
cold position with a white one. The order load
set at the delivery inspection is permanently
marked on the load scale with an X.
Low profile constant hanger type 18
adjustment
spindle
Constant support type 19
support brackets
ball bushing
adjustment spindle
1.27
Angulating constant support type 19
ball
bushing
type 79
traverse
type 71
support
bearing
type 11
constant
hanger
Connections type 11 C3 .. - 11 96 ..
(single cell hangers)
The upper connection is designed as an inner
thread with limited engagement depth. The
lower connection is designed as a spherical lock
nut pivotable in all directions by min. 4. The
connection threads are greased and sealed with
plastic caps.
Inspection
hole
(heavy duty)
Connections type 19
The upper connections of the constant supports
are fitted either with a load plate or slide plate
to reduce friction from lateral displacement,
or with a ball-joint lug for angulating constant
supports. The lower connections are therefore
either a pedestal or a lug. During welding work
at the pedestal the components inside constant
supports must be protected.
1.28
B) The connecting rods are to be installed vertically for the purpose of better inspection.
A controlled angled position in operating condition is thereby permitted.
At all events, uniform specifications for the
whole installation should exist.
The connecting rods and points are to be
force-fitted.
Type 11 C3 .. 11 96 ..
(single cell hanger)
cold position
For installation of the constant hangers, transport lugs or other assembly devices can be
screwed into the threaded holes on the sides.
After deblocking of the hanger (see point 4)
the stops are to be screwed on here for safe
keeping. For constant hangers with support
brackets type 71 the hangers are fitted with
transport lugs instead of the upper connection
these can also store the stops.
warm position
1 Retaining rod
2 Washer
3 Retaining nut
Transport lock
type 12 82 .. 14 96 ..
The transport lock is loosened only on completion of hanger installation and at the same
time as the removal of the blocking plates.
warm position
cold position
For this, the retaining nut marked in red is removed at the lower end with a socket wrench.
Both parts (retaining rod and nut) are to be
stored in the same place as the stops. When
making the force-fit connection, care must be
taken that the lower yoke plate is screwed
into the lock nuts at least up to the inspection
hole. The installation dimension of the lower
yoke plate can be lengthened with the lock
nuts by 250mm or shortened by 70mm.
Constant hangers
types 12 82 .. 14 96 ..
For installation of the hangers, the side openings
of the upper yoke plate can be used for hooking
on. For hangers with support brackets, the upper
yoke plate is replaced by a transport lug.
4 Deblocking
Requirements
The correct deblocking of the constant hangers
in accordance with the following instructions is
crucial for the subsequent faultless functioning
of the pipe systems.
The stops are to be removed, as far as possible,
immediately before commissioning.
The stops must be removed as a matter of
principle in a systematic way, one after the
other, beginning at a fixed point or connection
point.
The whole system should be inspected beforehand according to point 3 of these installation
instructions.
Actual and theoretical condition
When it has been ensured that all connections
are firmly force-fitted, the suspended weight is
completely taken up by the constant hangers or
supports.
Blocked condition
a) Bolt is free:
Calibration load of the constant
hangers agrees with the weight
applied. Blocking plate can be
removed.
Assembly of the
1)
Completed:
deblocked condition
1.30
2)
6 Auxiliary devices
Tightening or loosening of the connecting
rods, as well as load calibration, can be performed manually on all hangers. For hangers in the higher load groups this work can
require a great deal of effort due to the higher
load calibration.
To facilitate the work, an auxiliary device can
be made available with which a hydraulic load
take-up using a handpump can be effected. It
is operated by LISEGA personnel.
3)
Procedure:
1) Unlock tab washer.
2) Turn adjusting screws equally on both
sides until the guide bolt is free.
3) Secure adjusting screws against twisting
by locking the tab washers.
1.31
2
PRODUCT
GROUP
Spring hangers,
spring supports
Spring hangers,
spring supports
Spring hangers,
spring supports
Contents
Page
2
0
1
PRODUCT
GROUP
3
4
5
6
7
8
9
2.0
Field of application
To avoid constraints in the
system, thermal expansion
in high-temperature piping
must not be restricted. The
piping must therefore be
supported in a correspondingly elastic manner.
Spring components
To balance slight vertical displacement in the
pipe systems, spring components are used as
supports. These components function on the
basis of preset helical coil springs which exert
a variable supporting load over the range of
movement in accordance with their specified
spring characteristics. Load variations resulting
from this are limited through the stress analysis
calculations, depending on the sensitivity of the
piping.
As standard practice, the permissible force deviation between cold position (blocking position)
and hot position should not exceed 25 % in
relation to the hot load.
Moreover, as a rule constant hangers/supports
are used that maintain a constant hanger/support force over the whole displacement range.
2.1
Special advantages of
LISEGA spring hangers
axis of symmetry
1
4
9
3
5
7
8
Spring hanger
type 21
axis of symmetry
standardized components.
2.2
Overview of types
Spring hangers and spring supports
0.04 100kN
Spring support
type 28
2.3
The angulating spring supports are fitted on one side with an adjustable load tube
and a rotating ball bushing joint and on the other with a fixed ball bushing joint.
The joints provide the appropriate connection to the type 35 weld-on brackets and
the dynamic clamps in product group 3.
load pre-tensioning
installation dimensions
free stroke
Add-on components
Slide plate for spring
supports type 29/28
To reduce friction between
the load plate and mating
component (e.g. clamp base),
PTFE sliding materials (up to 180C) or suitable
material for higher temperatures are used. The
counter component should in this case have a
stainless steel sliding surface. The selection of
slide plates can be found on p. 2.11.
2
Spring support type 29 .. 2.
(telescopic)
E dimension
load
Extended field of application with telescopic spring support 29 .. 2.
2.4
Selection overview,
spring components
Selection criteria for spring
hangers and supports
Permissible force variation
Spring rates
Design type
Extra-long springs
Maximum travel
To avoid functional variations through
instability from springs with long travel,
maximum travel of 50mm should not, as
a rule, be exceeded.
Economical size
The following selection procedures can be
followed to determine the most economical component size:
Spring hangers type 21, spring hangers type 25 for seating, spring supports type 29, angulating spring supports type 20
travel range
1..
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
42.5
45.0
47.5
50.0
2..
spring
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
3.. 4..
travel [mm]
0
0
10
15
20
30
30
45
40
60
50
75
60
90
70
105
80
120
90
135
100
150
110
165
120
180
130
195
140
210
150
225
160
240
170
255
180
270
190
285
200
300
type designation
5..
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340
360
380
400
21 C2 19 21
25
29 C2 19 29
20
0.04
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
0.13
0.14
0.16
0.17
0.18
0.19
0.20
0.21
0.22
0.23
0.24
0.25
2.1
D.
D.
D.
D.
19
19
19
19
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.46
0.48
0.50
0.52
2.1
4.1
8.3
21
25
29
20
1.
1.
1.
1.
18
18
18
14
0.41
0.45
0.50
0.54
0.58
0.62
0.66
0.70
0.75
0.79
0.83
0.87
0.91
0.95
1.00
1.04
1.08
1.12
1.16
1.20
1.25
4.1
8.3
16.6
21
25
29
20
2.
2.
2.
2.
18
18
18
14
0.83
0.91
1.00
1.08
1.16
1.25
1.33
1.41
1.50
1.58
1.66
1.75
1.83
1.91
2.00
2.08
2.16
2.25
2.33
2.41
2.50
8.3
16.6
33.3
21
25
29
20
3.
3.
3.
3.
18
18
18
14
21 4. 18 21 5. 18
25 4. 18 25 5. 18
29 4. 18 29 5. 18
20 4. 14 20 5. 14
load [kN]
1.66
3.33
6.66
1.83
3.66
7.33
2.00
4.00
8.00
2.16
4.33
8.66
2.33
4.66
9.33
2.50
5.00
10.00
2.66
5.33
10.66
2.83
5.66
11.33
3.00
6.00
12.00
3.16
6.33
12.66
3.33
6.66
13.33
3.50
7.00
14.00
3.66
7.33
14.66
3.83
7.66
15.33
4.00
8.00
16.00
4.16
8.33
16.66
4.33
8.66
17.33
4.50
9.00
18.00
4.66
9.33
18.66
4.83
9.66
19.33
5.00
10.00
20.00
spring rate c [N/mm]
33.3
11.1
22.2
44.4
16.6
33.3
66.6
33.3
66.6
133.3
66.6
133.3
266.6
21
25
29
20
6.
6.
6.
6.
18
18
18
14
21
25
29
20
7.
7.
7.
7.
18
18
18
14
21
25
29
20
8.
8.
8.
8.
18
18
18
14
21
25
29
20
9.
9.
9.
9.
18
18
18
14
13.33
14.66
16.00
17.33
18.66
20.00
21.33
22.66
24.00
25.33
26.66
28.00
29.33
30.66
32.00
33.33
34.66
36.00
37.33
38.66
40.00
20.00
22.00
24.00
26.00
28.00
30.00
32.00
34.00
36.00
38.00
40.00
42.00
44.00
46.00
48.00
50.00
52.00
54.00
56.00
58.00
60.00
26.66
29.33
32.00
34.66
37.33
40.00
42.66
45.33
48.00
50.66
53.33
56.00
58.66
61.33
64.00
66.66
69.33
72.00
74.66
77.33
80.00
33.33
36.66
40.00
43.33
46.66
50.00
53.33
56.66
60.00
63.33
66.66
70.00
73.33
76.66
80.00
83.33
86.66
90.00
93.33
96.66
100.00
66.6
88.9
133.3
266.6
533.3
100.0
133.3
200.0
400.0
800.0
133.3
177.8
266.6
533.3
1066.6
166.6
222.2
333.3
666.6
1333.3
Example:
Example:
Operating load
Permissible deviation
Travel (upwards)
F = 6000N
p 25%
s = 15mm
c
Selection type
Spring rate
25 42 18
c = 66.6N/mm
Cold load
FK= 7000N
Change in force =
F =
15mm 66.6N/mm
= 0.1665
6000N
F [%] = 16.65%
Spring hangers type 22, spring hangers type 26 for seating, spring supports type 28
travel range
1..
0
2.5
5.0
7.5
10.0
12.5
15.0
17.5
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
42.5
45.0
47.5
50.0
2..
spring travel [mm]
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
type designation
3..
22 1. 19
26 1. 19
28 1. 19
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
53.33
58.66
64.00
69.33
74.66
80.00
85.33
90.66
96.00
101.33
106.66
112.00
117.33
122.66
128.00
133.33
138.66
144.00
149.33
154.66
160.00
533.3
1066.6
2133.3
22 2. 19
26 2. 19
28 2. 19
22 3. 19
22 4. 19
26 3. 19
26 4. 19
28 3. 19
28 4. 19
load [kN]
66.66
80.00
100.00
73.33
88.00
110.00
80.00
96.00
120.00
86.66
104.00
130.00
93.33
112.00
140.00
100.00
120.00
150.00
106.66
128.00
160.00
113.33
136.00
170.00
120.00
144.00
180.00
126.66
152.00
190.00
133.33
160.00
200.00
140.00
168.00
210.00
146.66
176.00
220.00
153.33
184.00
230.00
160.00
192.00
240.00
166.66
200.00
250.00
173.33
208.00
260.00
180.00
216.00
270.00
186.66
224.00
280.00
193.33
232.00
290.00
200.00
240.00
300.00
spring rate c [N/mm]
666.6
800
1000
1333.3
1600
2000
2666.6
3200
4000
22 5. 19
26 5. 19
28 5. 19
133.33
146.66
160.00
173.33
186.66
200.00
213.33
226.66
240.00
253.33
266.66
280.00
293.33
306.66
320.00
333.33
346.66
360.00
373.33
386.66
400.00
type designation.
For the availability of the
different travel ranges, see
dimension tables on pp. 2.7
to 2.17.
1333.3
2666.6
5333.3
2.6
Spring hangers
Type 21
d2
SW
Spring hanger
type 21 C2 19 to 21 95 18
Standard design,
delivery from stock.
SW
d2
A
Dimension E increases on
loading by the corresponding
spring travel (see load table
on p. 2.5).
Order details:
spring hangers type 21 .. ..
marking:
set load: kN
travel: mm up/down
2.7
type
d2
E
21 C2 19
21 D2 19
21 D3 19
21 11 18
21 12 18
21 13 18
21 21 18
21 22 18
21 23 18
21 31 18
21 32 18
21 33 18
21 34 18
21 41 18
21 42 18
21 43 18
21 44 18
21 51 18
21 52 18
21 53 18
21 54 18
21 55 18
21 61 18
21 62 18
21 63 18
21 64 18
21 65 18
21 71 18
21 72 18
21 73 18
21 74 18
21 75 18
21 81 18
21 82 18
21 83 18
21 84 18
21 85 18
21 91 18
21 92 18
21 93 18
21 94 18
21 95 18
80
90
90
90
90
90
115
115
115
115
115
115
115
155
155
155
155
180
180
180
180
180
220
220
220
220
220
245
245
245
245
245
245
245
245
245
245
275
275
275
275
275
11
11
11
11
11
11
12
12
12
13
13
13
13
17
17
17
17
21
21
21
21
21
24
24
24
24
24
30
30
30
30
30
30
30
30
30
30
36
36
36
36
36
M10
M10
M10
M12
M12
M12
M12
M12
M12
M16
M16
M16
M16
M20
M20
M20
M20
M24
M24
M24
M24
M24
M30
M30
M30
M30
M30
M36
M36
M36
M36
M36
M42
M42
M42
M42
M42
M48
M48
M48
M48
M48
205
250
475
155
250
475
155
255
475
160
255
475
840
185
290
525
920
215
305
540
1035
1275
245
360
640
1205
1490
280
405
675
1300
1575
305
470
845
1430
1810
330
505
870
1515
1885
SW
weight [kg]
205
245
470
145
245
470
150
250
460
155
250
470
725
180
290
525
800
215
305
540
825
1065
245
360
640
980
1265
285
410
680
1070
1345
320
485
860
1330
1710
355
530
895
1395
1765
19
19
19
19
19
19
19
19
19
24
24
24
24
30
30
30
30
36
36
36
36
36
46
46
46
46
46
55
55
55
55
55
65
65
65
65
65
75
75
75
75
75
15
15
15
15
15
15
15
15
15
20
20
20
20
25
25
25
25
30
30
30
30
30
35
35
35
35
35
45
45
45
45
45
50
50
50
50
50
60
60
60
60
60
1.9
3.0
5.0
2.1
3.1
5.5
3.8
5.3
8.6
4.3
6.0
9.7
14.0
9.2
12.8
20.0
29.0
16.5
20.5
32.0
46.0
57.0
31.0
40.0
62.0
90.0
114.0
48.0
63.0
89.0
133.0
160.0
58.0
80.0
126.0
182.0
228.0
84.0
111.0
164.0
243.0
296.0
Spring hangers
type 22 11 19 to 22 53 19
blocking device
SW2
SW1
d2
A
type
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
11
12
13
21
22
23
31
32
33
41
42
43
51
52
53
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
d2
d3
525
525
525
545
545
545
590
590
590
625
625
625
645
645
645
80
80
80
95
95
95
95
95
95
115
115
115
140
140
140
60
60
60
70
70
70
75
75
75
80
80
80
90
90
90
M56x4
M56x4
M56x4
M64x4
M64x4
M64x4
M68x4
M68x4
M68x4
M72x4
M72x4
M72x4
M80x4
M80x4
M80x4
62
62
62
72
72
72
72
72
72
82
82
82
92
92
92
E
SW1
SW2
weight
[kg]
440
560
840
475
595
875
490
610
890
555
685
955
630
800
1175
350
470
750
370
490
770
385
505
785
430
560
830
480
650
1025
90
90
90
105
105
105
105
105
105
120
120
120
135
135
135
30
30
30
30
30
30
30
30
30
35
35
35
35
35
35
85
85
85
95
95
95
100
100
100
105
105
105
115
115
115
46
46
46
46
46
46
46
46
46
55
55
55
65
65
65
65
65
65
75
75
75
80
80
80
85
85
85
95
95
95
240
270
340
285
320
410
360
405
510
455
515
625
550
655
865
Dimension E increases on
loading by the corresponding
spring travel (see load table
on p. 2.6).
Order details:
spring hangers type 22 .. ..
marking:
set load: kN
travel: mm up/down
2.8
Spring hangers
Type 25
Spring hangers for seating
type 25 D2 19 to 25 93 18
Standard design,
delivery from stock.
d4
d2
A
d6
C
B
type
72 D9 28
72 19 28
72 29 28
72 39 28
72 49 28
72 59 28
72 69 28
72 79 28
72 89 28
72 99 28
B
125
125
150
150
190
220
260
290
290
340
C
95
95
115
115
140
170
200
215
215
255
d6
12
12
14
14
18
18
23
23
27
33
E [kg]
8 1.0
8 1.0
10 1.6
12 1.8
12 3.0
12 4.0
15 6.9
20 10.9
20 10.9
25 18.2
load group
type
B
d2
d4
Xmax
weight [kg]
25 D2 19
25 D3 19
25 11 18
25 12 18
25 13 18
25 21 18
25 22 18
25 23 18
25 31 18
25 32 18
25 33 18
25 41 18
25 42 18
25 43 18
25 51 18
25 52 18
25 53 18
25 61 18
25 62 18
25 63 18
25 71 18
25 72 18
25 73 18
25 81 18
25 82 18
25 83 18
25 91 18
25 92 18
25 93 18
90
90
90
90
90
115
115
115
115
115
115
155
155
155
180
180
180
220
220
220
245
245
245
245
245
245
275
275
275
350
675
200
350
675
205
355
665
210
355
675
230
395
730
265
405
740
300
465
845
350
530
900
385
605
1075
415
645
1110
M10
M10
M12
M12
M12
M12
M12
M12
M16
M16
M16
M20
M20
M20
M24
M24
M24
M30
M30
M30
M36
M36
M36
M42
M42
M42
M48
M48
M48
13
13
13
13
13
13
13
13
18
18
18
25
25
25
28
28
28
34
34
34
40
40
40
47
47
47
54
54
54
245
470
145
245
470
150
250
460
155
250
470
180
290
525
215
305
540
245
360
640
300
430
700
335
500
875
370
545
910
380
705
230
380
705
235
385
695
250
395
715
280
445
780
325
465
800
375
540
920
440
620
990
495
715
1185
535
765
1230
2.8
4.9
2.1
3.1
5.5
3.5
5.1
8.4
3.7
5.3
8.9
8.0
11.5
18.6
14.5
18.0
29.0
26.0
35.0
56.0
40.0
53.0
79.0
44.0
66.0
111.0
67.0
92.0
143.0
Order details:
spring hangers type 25 .. ..
marking:
set load: kN
travel: mm up/down
2.9
d4
blocking device
SW
d2
A
26
26
26
26
26
26
26
26
26
26
26
26
26
26
26
type
B
d2
d4
SW
Xmax
weight [kg]
11
12
13
21
22
23
31
32
33
41
42
43
51
52
53
510
510
510
560
560
560
610
610
610
610
610
610
610
610
610
395
565
945
405
575
955
420
590
970
470
650
1025
530
750
1220
M56x4
M56x4
M56x4
M64x4
M64x4
M64x4
M68x4
M68x4
M68x4
M72x4
M72x4
M72x4
M80x4
M80x4
M80x4
60
60
60
70
70
70
70
70
70
80
80
80
90
90
90
345
465
745
355
475
755
370
490
770
420
550
825
480
650
1020
46
46
46
46
46
46
46
46
46
55
55
55
65
65
65
530
700
1080
560
730
1110
585
755
1135
645
825
1200
725
945
1415
205
235
310
265
300
390
345
390
490
395
450
555
465
545
725
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
Order details:
spring hangers type 26
marking:
set load: kN
travel: mm up/down
2.10
Spring supports
Type 29
D
Spring supports
type 29 C2 19 to 29 93 18
Standard design,
delivery from stock.
L1
d6
L1
40
40
40
40
40
65
65
110
110
150
150
d6
E
weight
[kg]
29 C2 19
29 D1 19
29 D2 19
29 D3 19
29 11 18
29 12 18
29 13 18
29 21 18
29 22 18
29 23 18
29 31 18
29 32 18
29 33 18
29 41 18
29 42 18
29 43 18
29 51 18
29 52 18
29 53 18
29 61 18
29 62 18
29 63 18
29 71 18
29 72 18
29 73 18
29 81 18
29 82 18
29 83 18
29 91 18
29 92 18
29 93 18
80
90
90
90
90
90
90
115
115
115
115
115
115
155
155
155
180
180
180
220
220
220
245
245
245
245
245
245
275
275
275
105
125
125
125
125
125
125
150
150
150
150
150
150
190
190
190
220
220
220
260
260
260
290
290
290
290
290
290
340
340
340
75
95
95
95
95
95
95
115
115
115
115
115
115
140
140
140
170
170
170
200
200
200
215
215
215
215
215
215
255
255
255
10
12
12
12
12
12
12
14
14
14
14
14
14
18
18
18
18
18
18
23
23
23
23
23
23
27
27
27
33
33
33
270
195
305
550
195
305
550
200
310
540
205
310
550
240
360
615
270
370
625
305
430
730
360
500
790
400
575
965
440
625
1010
36
36
36
36
36
36
36
36
36
36
36
36
36
48
48
48
50
50
50
50
50
50
52
52
52
55
55
55
60
60
60
210
145
245
470
145
245
470
150
250
460
155
250
470
180
290
525
210
300
535
245
360
640
300
425
695
335
500
870
370
545
910
80
80
80
80
80
80
80
100
100
100
100
100
100
120
120
120
150
150
150
170
170
170
200
200
200
200
200
200
240
240
240
6
8
8
8
8
8
8
10
10
10
12
12
12
12
12
12
12
12
12
15
15
15
20
20
20
20
20
20
25
25
25
2.6
3.2
4.3
6.6
3.4
4.6
7.2
5.6
7.6
11.1
6.3
8.4
13.0
11.9
16.0
25.0
20.0
24.3
37.0
34.0
44.0
68.0
53.0
68.0
97.0
60.0
84.0
133.0
91.0
118.0
173.0
Dimension E is independent of
the load adjustment; it changes on
loading by the respective spring
travel (see load table on p. 2.5).
Adjustment possibility + 30mm.
typ e
type 29 .9 15-E
load group
Spring support
type 28 11 19 to 28 53 19
blocking device
L2
L1
SW
d6
type
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
11
12
13
21
22
23
31
32
33
41
42
43
51
52
53
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
d6
E
SW
weight
[kg]
510
510
510
560
560
560
610
610
610
610
610
610
610
610
610
530
530
530
580
580
580
630
630
630
630
630
630
630
630
630
440
440
440
490
490
490
530
530
530
530
530
530
530
530
530
420
420
420
420
420
420
450
450
450
450
450
450
480
480
480
33
33
33
33
33
33
33
33
33
39
39
39
39
39
39
405
535
835
450
585
880
460
595
890
505
685
1075
560
750
1135
60
60
60
65
65
65
65
65
65
70
70
70
75
75
75
330
450
730
370
500
775
380
510
785
425
595
965
475
655
1020
25
25
25
25
25
25
25
25
25
30
30
30
35
35
35
46
46
46
46
46
46
46
46
46
55
55
55
65
65
65
230
260
360
310
350
460
380
430
555
440
520
740
495
580
785
Dimension E is independent
of the load adjustment; it
changes on loading by the
respective spring travel (see
load table p. 2.6). Adjustment
possibility + 30mm.
L1
L2
80
80
110
110
150
300
300
310
310
300
L1
L2
80
80
110
110
150
300
300
310
310
300
Typical application
Order details:
spring supports type 28 .. ..
marking: ...
set load: kN
travel: mm up/down
2.12
E
d3
6
SG
G R
Dimension E is independent
Order details:
angulating spring support
type 20 .. ..
marking:
set load: kN
travel: mm up/down
E +87.5
37.5
A+50
type
20 D2 19
20 D3 19
20 12 14
20 13 14
20 22 14
20 23 14
20 32 14
20 33 14
20 42 14
20 43 14
20 52 14
20 53 14
20 62 14
20 63 14
20 72 14
20 73 14
20 82 14
20 83 14
20 92 14
20 93 14
90
90
90
90
115
115
115
115
155
155
180
180
220
220
245
245
245
245
275
275
d3
E
SG
weight
[kg]
10
10
10
10
12
12
15
15
15
15
20
20
20
20
30
30
30
30
50
50
370
615
370
615
380
615
390
645
440
700
470
730
535
835
650
940
735
1125
815
1200
45
45
45
45
50
50
58
58
58
58
65
65
65
65
100
100
100
100
130
130
15
15
15
15
19
19
21
21
21
21
31
31
31
31
50
50
52
52
62
62
260
485
260
485
260
475
260
495
300
540
315
555
370
655
430
700
505
875
550
910
15
15
15
15
20
20
23
23
23
23
30
30
30
30
45
45
45
45
60
60
9
9
9
9
10
10
12
12
12
12
16
16
16
16
22
22
22
22
35
35
4
7
4
8
7
11
7
12
15
25
24
37
45
69
70
101
87
139
120
182
d3
L37.5
type
Installation dimensions
E max with load reduction
possible. Shorter L dimensions
can be supplied, but then
without adjustment possibility
of 37.5mm.
Order details:
extension for angulating
spring support type 20 .9 ..
L dimension: mm
2.13
20 D9 19
20 D9 19
20 19 14
20 19 14
20 29 14
20 29 14
20 39 14
20 39 14
20 49 14
20 49 14
20 59 14
20 59 14
20 69 14
20 69 14
20 79 14
20 79 14
20 89 14
20 89 14
20 99 14
20 99 14
20 D2 19 325 42
20 D3 19 570 42
20 12 14 325 42
20 13 14 570 42
20 22 14 330 48
20 23 14 565 48
20 32 14 332 60
20 33 14 587 60
20 42 14 382 60
20 43 14 642 60
20 52 14 405 76
20 53 14 665 76
20 62 14 470 76
20 63 14 770 76
20 72 14 550 89
20 73 14 840 89
20 82 14 635 89
20 83 14 1025 89
20 92 14 685 102
20 93 14 1070 102
d3
10
10
10
10
12
12
15
15
15
15
20
20
20
20
30
30
30
30
50
50
L37.5
87.5
87.5
E + 37.5
min E + 37.5
max min
525
770
525
770
535
770
547
802
597
857
675
935
740
1040
835
1125
920
1310
1015
1400
1220
1220
1220
1220
1465
1465
1460
1460
1460
1460
1950
1950
1950
1950
1925
1925
2425
2425
2410
2410
200
200
200
200
205
205
215
215
215
215
270
270
270
270
285
285
285
285
330
330
L37.5
max
895
650
895
650
1135
900
1128
873
1078
818
1545
1285
1480
1180
1375
1085
1790
1400
1725
1340
weld-on
bracket
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
29
29
29
29
39
39
49
49
49
49
59
59
59
59
69
69
69
69
79
79
13
13
13
13
13
13
13
13
13
13
19
19
19
19
19
19
19
19
19
19
weight
for Lmin [kg] pipe [kg/m]
1.1
1.1
1.1
1.1
1.3
1.3
2.5
2.5
2.5
2.5
8.0
8.0
8.0
8.0
10.6
10.6
10.6
10.6
16.5
16.5
3.8
3.8
3.8
3.8
4.4
4.4
8.4
8.4
8.4
8.4
14.6
14.6
14.6
14.6
21.1
21.1
21.1
21.1
30.6
30.6
L
X
d2
The 4th digit of the type designation refers to the travel range
of the spring hanger 1=50mm,
2=100mm, 3=200mm.
E 50
type
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
D.19
1. 19
2. 19
3. 19
3. 19
4. 19
4. 19
5. 19
5. 19
6. 19
6. 19
7. 19
7. 19
8. 19
8. 19
9. 19
nominal
load
[kN] d2 Lmax
1.04
2.5
5
10
10
20
20
40
40
80
80
120
120
160
160
200
M10
M12
M12
M16
M16
M20
M20
M24
M24
M30
M30
M36
M36
M42
M42
M48
1700
1700
1700
900
1800
1400
1800
1250
1800
1250
2400
1800
2400
1200
1800
1800
E
for travel range
1
2
3
290
290
315
300
345
345
405
390
445
435
505
500
560
555
610
385
385
390
410
395
450
450
495
480
560
550
630
625
725
720
785
610
610
610
630
615
685
685
730
715
840
830
900
895
1100
1095
1150
80
80
80
80
120
120
140
140
180
200
260
260
300
260
300
300
90
90
115
115
115
155
155
180
180
220
220
245
245
245
245
275
140
140
140
140
190
190
200
200
230
250
310
310
350
310
350
350
15
15
15
20
20
25
25
30
30
35
35
45
45
50
50
60
d2
24
28
29
41
53
61
77
93
138
174
214
245
242
273
335
26
26
31
32
45
60
68
85
101
156
192
244
275
286
317
390
30
31
37
39
52
74
82
108
124
200
236
296
327
378
410
495
1.7
1.7
1.7
1.7
2.7
2.7
3.2
3.2
4.4
5.1
7.6
7.6
9.2
7.6
9.2
9.2
travel range
E dim. approx.
1
2
3
30
55
105
lengthened by up to 2400mm
on reduction of the permissible
center loading by 5% per
100mm extension.
Order details:
spring hanger trapeze type 79 .. 19
L = mm, marking: ,
set load: kN
travel: mm up/down
Spring hanger trapezes
(welded version)
type 79 D. 11 to 79 9. 11
see above.
type
nominal
load
[kN]
d2
Lmax
79 D.11
79 1. 11
79 2. 11
79 3. 11
79 4. 11
79 5. 11
79 6. 11
79 7. 11
79 8. 11
79 9. 11
1.04
2.5
5
10
20
40
80
120
160
200
M10
M12
M12
M16
M20
M24
M30
M36
M42
M48
1400
1400
1600
1600
1750
2100
2100
2100
2150
2200
80
100
100
100
120
160
200
240
260
280
19
26
27
41
68
110
159
186
243
16
21
29
30
48
76
128
189
230
297
20
26
35
38
63
99
172
241
322
403
per
100mm
[kg]
1.1
1.6
2.0
2.0
2.7
4.3
6.1
8.3
9.3
10.3
2.14
Sway braces
Type 27
Sway braces
type 27 D2 19 to 27 62 19
d3
load adjustment
C37.5
6
SG
adjustment
free stroke
type
Order details:
sway brace type 27 .2 19
marking:
set load: kN
travel: mm up/down
27 D2 19 0.52
27 12 19 1.25
27 22 19 2.50
27 32 19 5.00
27 42 19 10.00
27 52 19 20.00
27 62 19 40.00
0.12
0.41
0.83
1.66
3.33
6.66
13.33
0.42
1.04
2.08
4.16
8.33
16.66
33.33
4.1
8.3
16.6
33.3
66.6
133.3
266.6
90
90
90
90
115
90
115
90
155
90
180 100
220 100
SG
50
50
50
55
55
75
75
295
295
300
305
355
380
445
15
15
19
21
21
30
30
9
9
10
12
12
16
16
29
29
39
49
49
59
59
13
13
13
13
13
19
19
5.5
5.8
10.0
11.0
23.0
39.0
62.0
L37.5
A 37.5
Installation dimensions
2.15
Order details:
extension for sway brace
type 27 .9 19
L dimension: mm
640
640
650
665
730
810
875
E 75
d3
10
10
12
15
15
20
20
type
27
27
27
27
27
27
27
D9 19
19 19
29 19
39 19
49 19
59 19
69 19
A37.5
590
590
600
610
675
735
800
42
42
48
60
60
76
76
d3
min
10
10
12
15
15
20
20
790
790
805
825
890
1005
1070
E75
max
L37.5
min
max
1600
1600
2000
2000
2000
2400
2400
200
200
205
215
215
270
270
1010
1010
1400
1390
1325
1665
1600
weight
for Lmin [kg] pipe [kg/m]
1.1
1.1
1.3
2.5
2.5
8.0
8.0
3.8
3.8
4.4
8.4
8.4
14.6
14.6
tension
nominal load
min. load
strength
Function diagram
25
25
travel [mm]
compression
upper ball
bushing joint
lock nut
lock nut
guide pipe
threaded pipe
lock nut
guide rod
type plate with
travel scale
travel scale
lower ball
bushing joint
spring plate
spring
free stroke
load adjustment
compression force
neutral position
tension force
Load transmission on
alternating force direction
2.16
D
L1
slide plate
d6
Order details:
spring support type 29 .. 2.
marking:
set load: kN
travel: mm up/down
2.17
type
29 D1 2.
29 D2 2.
29 D3 2.
29 11 2.
29 12 2.
29 13 2.
29 21 2.
29 22 2.
29 23 2.
29 31 2.
29 32 2.
29 33 2.
29 41 2.
29 42 2.
29 43 2.
29 51 2.
29 52 2.
29 53 2.
29 61 2.
29 62 2.
29 63 2.
29 71 2.
29 72 2.
29 73 2.
29 81 2.
29 82 2.
29 83 2.
29 91 2.
29 92 2.
29 93 2.
130
130
130
130
130
130
155
155
155
155
155
155
195
195
195
220
220
220
275
275
275
300
300
300
300
300
300
325
325
325
155
155
155
155
155
155
180
180
180
180
180
180
220
220
220
245
245
245
305
305
305
330
330
330
330
330
330
370
370
370
125
125
125
125
125
125
145
145
145
145
145
145
180
180
180
200
200
200
245
245
245
265
265
265
270
270
270
295
295
295
d6
L1
80
80
80
80
80
80
100
100
100
100
100
100
120
120
120
150
150
150
170
170
170
200
200
200
200
200
200
245
245
245
12
12
12
12
12
12
14
14
14
14
14
14
18
18
18
18
18
18
23
23
23
23
23
23
27
27
27
33
33
33
40
40
40
40
40
40
40
40
40
40
40
40
65
65
65
65
65
65
110
110
110
110
110
110
150
150
150
150
150
150
8
8
8
8
8
8
10
10
10
12
12
12
12
12
12
12
12
12
18
18
18
20
20
20
22
22
22
25
25
25
170
230
375
170
230
370
175
235
365
180
240
380
195
255
400
220
290
430
260
330
515
295
375
555
335
450
735
375
505
775
0.20
0.20
0.20
0.58
0.58
0.58
1.16
1.16
1.16
2.33
2.33
2.33
4.66
4.66
4.66
9.33
9.33
9.33
18.66
18.66
18.66
36.00
36.00
36.00
53.33
53.33
53.33
66.66
66.66
66.66
0.52
0.52
0.52
1.25
1.25
1.25
2.5
2.5
2.5
5
5
5
10
10
10
20
20
20
40
40
40
60
60
60
80
80
80
100
100
100
8.3
4.1
2.1
16.6
8.3
4.1
33.3
16.6
8.3
66.6
33.3
16.6
133.3
66.6
33.3
266.6
133.3
66.6
533.3
266.6
133.3
800
400
200
1066.6
533.3
266.6
1333.3
666.6
333.3
5.0
6.5
9.5
5.5
7.0
10.0
8.0
10.5
15.0
8.5
11.0
16.5
15.0
20.0
29.0
24.0
30.0
43.0
44.0
53.0
80.0
63.0
76.0
105.0
71.0
91.0
142.0
96.0
124.0
181.0
2.18
upper connection
travel scale
blocking device
name plate
lower connection
spring plate
cover plate
securing strap
support tube
2 Delivery condition
If not agreed otherwise, LISEGA spring hangers
are set and blocked at the desired cold position
(installation condition). Special blocking devices
fix the spring plates in both directions. The adjustment values can be read off the travel scale or
name plate.
Stamped on the name plate are:
Spring hanger
type 21
type 22
type 26
3 Installation
On installation, the specifications in the installation instructions for the piping systems should
also be observed, especially the desired installation position of the connecting rods over the
whole load chain. There are two possibilities:
Name plate for spring hangers
2.19
Spring hanger type 21
(blocked)
Spring hanger type 22
(blocked)
Spring support type 29
(blocked)
Spring support type 28
(blocked)
hot position
cold position
Angulating spring support
type 20 (blocked)
Sway brace type 27
Sway brace
type 27 angled
arrangement
Sway brace
type 27 simple
arrangement
2.20
minimum
engagement
depth
minimum
engagement
depth
4 Deblocking
The spring hangers/supports may only be deblocked when the set load is fully applied on all
the supports making up a support system. If this
is the case the blocking devices can be easily
removed. If the devices are jammed, the load actually applied does not agree with the theoretical
setting (see point 5, load correction).
2.21
fixing screw
Type 25, 26
Load adjustment can be made by loosening or
tightening the load nut.
Type 20, 28, 29
Load adjustment can be made by adjusting the
support tube of the spring supports.
hydraulic
cylinder
hydraulic
cylinder
B
A
E
6 Auxiliary devices
To facilitate load adjustment or deblocking, an
auxiliary installation device can be supplied for
the higher load groups. The load transfer is then
taken up by means of a hydraulic pump. This is
operated by LISEGA technicians.
5 Load correction
Before every load adjustment, under all circumstances the technical department responsible
must be consulted.
2.22
3
PRODUCT
GROUP
Page
3
0
1
2
PRODUCT
GROUP
4
5
6
7
8
9
3.0
Field of application
To avoid unacceptable
stresses and moments in
the piping systems, unplanned deflections in the
piping or other plant components must be prevented.
Thermal displacement must,
however, not be obstructed!
Dynamic events
start-up / shut-down
pressure impacts from valve operations
water hammer
boiler detonations
pipe rupture
wind loads
seismic events
aircraft crashes
explosions
pipe systems
pumps
valve assemblies
pressure vessels
steam generators
boilers, heat exchangers
3.1
Main products
Snubbers type 30, 31
The use of snubbers is preferred in thermally operating plant components. In a dynamic
event, snubbers provide an instantaneous,
fixed, practically rigid connection between the
component to be secured and the surrounding
structure. In this way the dynamic energy from
abrupt displacement can at once be transmitted and harmlessly dissipated. The thermal
displacements during routine operation are not
restricted.
3
s
Stroke
If operational displacements have to be restricted, e.g. in zero crossings, rigid struts are used.
These components form rigid connections from
connection point to connection point and do
not permit movement of any kind in the axial
direction. As they are fitted with articulated
bearings they permit slight lateral displacement.
rigid
If only minor operational displacement is expected at the load application point, energy absorbers can be used. These components allow slight
movements limited in the end positions by an
adjustable gap. Any components affected are
protected from overloading because, due to the
design, the dynamic energy applied is transformed into plastic deformation of the absorber.
free stroke
(adjustable)
dissipated
energy
s
sb
(working stroke)
tension
dissipated
energy
elongation
3.2
Instructions on use
The components in product group 3 are dynamically stressed. When using them, the following
points must be observed for their effective
functioning:
1. In the conception of dynamic fixed points the
rigidity of the whole system, i.e. of all components in the support chain, must be taken into
account.
type 35
type 35
type 33
type 37
type 39
type 30
type 30
type 33
type 35
type 34
7. The installation drawings should clearly indicate the degree of freedom of possible angulation of the components.
type 36
type 36
type 39
type 30
type 35
type 35
type 35
type 35
type 39
type 30
type 36
type 30
type 38
special design
type 35
type 39
type 37
type 32
type 39
type 38
type 35
special design
3.3
special
design
type 36
type 39
type 34
type 35
special
design
Snubbers
Type 30, 31
LISEGA snubbers have stood the test of time in
practical applications for well over four decades
and have thereby proven their outstanding reliability. Extensive operational experience has,
together with continuous further development,
led to highly acclaimed state-of-the-art products
and to worldwide market leadership.
Access to snuubbers after installation is almost
always difficult and, due to possible danger
to personnel from radiation when installed in
nuclear power plants, is subject to stringent
safety regulations. For this reason the most
stringent demands are made on reliable, maintenance-free, continuous functionality.
For the reliable operational safety of snubbers,
besides the function principle and whole design,
the quality of critical components is crucial:
sealing systems
piston and rod guides
hydraulic fluid
sliding surfaces
corrosion-resistant materials
corrosion-free interiors
control valves
Snubbers type 30
At LISEGA, sealing systems, guides and hydraulic fluid are certified by reliable qualification
procedures to give at least 23 years of troublefree operation under normal operating conditions in a nuclear power station.
The following quality features prove the
superior functioning and long life of LISEGA
snubbers:
corrosion-resistant materials
special sealing systems
vibration-resistant special guides
pressurized hydraulic systems
dynamic functional behavior
exchangeable valves (type 31)
tested and approved for min. 23 years
maintenance-free operation
60-year design life
certified by suitability tests acc.
to KTA 3205.3
approvals acc. to ASME-NCA 3800
3.4
Design features
Snubbers Type 30, 31
Design features
The snubbers form a closed hydraulic system
without external bolted pressure fittings. The
individual parts of the units are connected
without welding by precision fits and screw
connections, and are mechanically secured.
As a protection against corrosion, LISEGA snubbers are manufactured exclusively from corrosion resistant materials.
The connecting lugs are of carbon steel and
protected with a galvanic coating.
The guides on piston rods and pistons are made
of a special friction-resistant, non-metallic material.
The compensating reservoir is sealed against
the atmosphere by a preloaded piston so that
slight overpressure is maintained in the hydraulic system. This ensures the permanent
functioning of all seals and the positive feed
of hydraulic fluid to the cylinder regardless of
the installed orientation.
The control valves are vital for dynamic function. To achieve high functional accuracy the
valve parameters have been optimized by extensive testing and special calculation models.
Seals
The decisive design features for long-lasting
function are the sealing systems. Besides the
hydraulic fluid and guide bands, they form part
of the non-metallic materials and are therefore
exposed to natural aging and wear.
The most important requirement for a long-lasting sealing effect is the choice of the correct
sealing material. The crucial factor thereby is
the seals restitution behavior (shape memory)
or compression set, providing the lowest possible stress relaxation.
For optimum utilization of material properties
the special shape of the seals is also important,
while for final functional efficiency the best
combination of the following features are
critical:
3.5
thermal resistance
radiation resistance
resistance to wear, especially highfrequency vibrations
good restitution behavior (shape memory)
good dry run characteristics
limited tendency to diffusion in seal
surfaces
minimal transfer from static to sliding
friction (stick-slip effect)
Design features
Snubbers Type 30, 31
Type 30
Connection possibilities
connection A
connection A
special lugs
short extension without
possibility of length
adjustment
standard extension with
possibility of length
adjustment
Non-corroding materials.
Radiation-resistant, wear-resistant seals.
type 33
Type 31
3.6
Function
Control valves
The function of the LISEGA hydraulic snubbers
type 30 is controlled by a main control valve
(B) positioned axially in the hydraulic piston (A).
On slow displacement of the piston
( 2mm/s) the valve is held open by spring
force and the hydraulic fluid can freely flow
from one cylinder chamber into the other. On
rapid piston displacement above a velocity
limit (approx. 2mm/s), back pressure
develops on the valve disk and closes the
valve. The hydraulic flow is interrupted
and the displacement blocked. Due to
the compressibility of the hydraulic fluids,
damaging load peaks are also prevented.
On displacement in pressure direction, the compensating valve (D) also closes almost synchronously with the piston valve.
type 37
type 30
type 33
type 35
D
type 35
type 30
type 38
special design
type 35
type 39
type 36 type 30
3.7
C
Function diagram,
snubber type 30
Bypass
Function diagram,
snubber type 31
In-service testing
The valve system is designed to be replaceable, so that all the snubbers type 31 need not
be removed for routine function testing. In this
way, in the event of a recurrent test only
the valve units are replaced by a previously
certified valve assembly. A special shut-off
device thereby prevents loss of fluid. The
replaced valve assembly can subsequently
be tested on a test snubber and prepared
for future use. This design meet the intent of
Compensating reservoir
sub-component testing according to ASME OM
To balance the piston rod volume, as well as to
Code, Subsection ISTD.
change the volume of hydraulic fluid on change
of temperature, volume compensation via a
To prevent the valves from remaining in a blocked
condition they are designed with a bypass system.
This permits a gentle after-flow at continuous
force and ensures the safe opening of the valves
in both cylinder chambers through rapid pressure balance. The compensating valve works
synchronously with the main valve in the same
way.
Function Tests
Snubbers type 30, 31
Especially stringent safety demands in
the nuclear field require flawless proof
of the function parameters for snubbers.
This applies both to initial delivery inspection and to recurrent tests.
The LISEGA test technology is permanently improved in-house and complies
with the most up-to-date technical standards. The test benches function as
dynamic Hydropuls units with optional
A
3.8
Operational behavior
Snubbers Type 30, 31
Operational behavior
On dynamic loading, LISEGA snubbers offer a
constant, predictable, functional behavior subject to the load spectrum.
The specified values correspond to the recognized international specifications and practical
requirements. Observation of the values is certified and recorded during factory testing.
type 30
type 31
travel range
8, 2, 9
travel range 3
(stroke 300)
travel range 8
(stroke 100)
travel range 9
(stroke 200)
6mm
8mm
10mm
12mm
lockup velocity at Rt
bypass velocity at FN und Rt
0.2-2mm/s
at FN 8kN
2.5% FN
at FN 8kN
largest value out
of 200N or 1%FN
(short-term, max. 1hr) the push rod travel can increase by up to about 50%
due to changed oil viscosity.
1%FN
Force F
FFaulted
FEmergency
FN
rigidity
2FN
K= ____
sb
sa
sb
-FN
s
t
-FFaulted
3.9
sb
-FEmergency
Permissible loads
Snubbers Type 30, 31
Operational demands
LISEGA hydraulic snubbers are designed as
standard for the following operational demands. The specified values are certified by
KTA suitability tests.
continuous operation
max. 80C
max. 150C
at 10-150C
100%
up to max. 150C
X=1
energy dose
cumulative
continuous operation
0.5-1 bar
short-term
ambient pressure
3
Test facilities for snubbers
in Zeven plant, Germany
hydraulic fluid
(silicon oil)
setting point
50C
flash point
300C
ignition point
500C
Resistance to fatigue
Proof of operational durability is based on the
following accumulated load cycles:
nominal load FN . . . . . . . . . . . . . . load cycle
10% . . . . . . . . . . . . . . . . . . . . . . . 2,000,000
50% . . . . . . . . . . . . . . . . . . . . . . . . 100,000
80% . . . . . . . . . . . . . . . . . . . . . . . . . 20,000
100% (Level A/B). . . . . . . . . . . . . . . . 10,000
133% (Level C) . . . . . . . . . . . . . . . . . . . .100
172% (LeveI D) . . . . . . . . . . . . . . . . . . . . .10
The load cycle figures correspond to an assumed maximum dynamic load capacity from
diverse load events over a period of 40 years.
They also comply to the requirements of the
test programs of the KTA suitability tests performed. The test results certify that the snubbers endure these loads while maintaining their
operational capability.
Due to their specially designed guides, the
snubbers are extremely resilient to any continuous operational vibrations. This is proven by
confirmed practical experience.
3.10
z
me
type 35
Typ 33
Typ 33
Design
Typ 35
special design
isdie
der
er
Typ 35
Typ 35
typeTyp
39 30
type 34
Mode of operation
Typ 37
en
mtte-
aun
Tasks
Typ 35
type 35
Typ
type 39
39
Typ 36
Typ 36
vollTyp 36
in
Typ 35
eAn-
n
chti-
st
bll-
Typ
39 surface
Typ 30
type 36
Typ
35
Typ 35
Typ 30
Typ 39
Typ 36
3.11
Typ 30
taper disks B
free stroke
(tension)
E A
C
D
length adjustment
adjustment of free stroke H
Function certification
LISEGA energy absorbers have gone through an
exhaustive test program to prove their functional
reliability. In numerous dynamic and static stress
tests, as well as load capacity tests, their safety
has been clearly demonstrated.
Energy absorbers are maintenance-free during
operation and require no in-service testing.
3.12
load
F
dissipated
energy
travel
s
sb
(displacement range)
Viscoelastic damper with
transport brackets without offset
name plate
position indicator
transport brackets
Hysteresis of a viscoelastic
damper
Viscoelastic damper
with adjusted offset
3.13
connecting plates
OD
tension
dissipated
energy
elongation
3.14
shear lug
3.15
If the customer order does not show a particular modification of the layout, the bracket
connection is fitted so that the main angulation
range runs along the pipe axis.
Type 36 .. .1/2/3
Type 37 .. .1/2/3/4/5/6
Type 36 .. .4/5
Type 37 .. .7/8/9
1, 2
3
4
5
6
7
8
9
85
81
75
65
40
25
0
125
121
115
105
80
65
40
0
E dimension reduction E
0
4
0
10
6
0
20
16
10
0
45
41
35
25
0
60
56
50
40
15
0
Special designs
In some cases special designs are advisable in
addition to the dynamic clamps type 36 and 37.
In particular, for parallel and angulating arrangements, standardized design and calculation
methods have been proved successful.
permiss. permanent
tension stress
100%
100%
80%
80%
65%
55%
65%
60%
type 39
type 34
special design
type 39
type 37
type 35
type 39
type 35
type 39
type 34
special design
Horizontal axial stop with rigid strut type 39 and pipe clamp type 34 incl. spacer
3.16
Dynamic clamps
Type 34
Dynamic stresses frequently
arise in the direction of the
pipe axis (e.g. from shock
impacts or other forms of
excitation). To absorb these
loads the special dynamic
clamp type 34 was developed.
Type 34
Securing positions
Design
For the design of the dynamic clamps type 34
the following parameters are required:
Type 34 with snubbers type 30
and trunnions
3.17
3
Horizontal axial stop with rigid struts type 39 and pipe clamp type 34
3.18
Snubbers
Type 30
Snubbers
type 30 18 16 to 30 03 12
Serial standard design.
Delivery from stock.
Only corrosion-resistant
materials are used.
travel indicator
connecting lug
fluid inspection
SG
name plate
piston rod cover
ma
x. 90
d3
R
F
E
type
Order details:
snubber type 30 .. ..
with 2 weld-on brackets
type 35 .. ..
marking: ...
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
18
38
39
42
43
52
53
62
63
72
73
82
83
92
93
02
03
16
16
16
16
16
13
13
16
16
16
16
16
16
13
13
12
12
4.0
10.6
10.6
23.9
23.9
61
61
141
141
267
267
472
472
735
735
1335
1335
100
100
200
150
300
150
300
150
300
150
300
150
300
150
300
150
300
54
70
70
85
85
135
135
170
170
200
200
270
270
300
300
390
390
d3
E
E
min
max
F
SG
weight
[kg]
10
12
12
15
15
20
20
30
30
50
50
60
60
70
70
100
100
220
315
410
395
545
445
595
535
685
615
765
730
880
760
910
935
1085
320
415
610
545
845
595
895
685
985
765
1065
880
1180
910
1210
1085
1385
18
50
50
58
58
65
65
100
100
130
130
165
165
165
165
240
240
15
20
20
22.5
22.5
30
30
45
45
60
60
75
75
105
105
147
147
9
10
10
12
12
16
16
22
22
35
35
44
44
49
49
70
70
1.9
4.3
5.7
8.3
12
20
29
37
51
61
78
122
147
175
207
390
460
3.19
can be supplied.
Snubbers
Type 31
Snubbers
type 31 98 16 to 31 58 16
travel indicator
name plate
valves
SG
connecting lug
ball bushing joint
max.
45
L
d3
F
E
type
31
31
31
31
31
31
31
31
98
99
08
09
28
38
48
58
16
16
16
16
16
16
16
16
735
735
1335
1335
2660
4000
5320
6650
100
200
100
200
100
100
100
100
240
240
330
330
440
540
580
630
d3
E
E
min
max
70
70
100
100
120
140
160
180
620
735
765
880
870
1020
1050
1140
720
935
865
1080
970
1120
1150
1240
95
95
120
120
160
190
205
230
90
90
110
110
155
180
200
220
310
310
385
385
450
620
585
670
SG
weight
[kg]
115
145
145
200
150
100
255
205
105
105
140
140
160
200
245
290
49
49
70
70
85
90
105
105
152
181
285
338
648
968
1300
1750
Lmax
Lmax at 80C
Order details:
snubber type 31 .. ..
marking: ...
3.20
Installation extensions
Type 33
Installation extensions
type 33 18 18 to 33 03 12
Serial standard design.
Type 33 extensions are
used if greater installation
lengths are required.
Connection to the snubber
or energy absorber is made
at the cylinder base. By
means of serially-produced
screw connections the
change over easily be made
from standard connecting
lugs to extensions. This also
applies to special connections, which are particularly
useful when exchanging
other makes, as in this way
the connections on site can
still be used. Further connection possibilities can be
found on p. 3.6.
Material:
body
extension
paddle
lock nut
A
L37.5
E
P355NH
P250GH
C45E+QT
S355J2
Order details:
installation extension
type 33 .. ..
L = ...mm for
hydr. snubber
or energy absorber
d3
nom.
load
[kN]
snubber
stroke
A
18
18
18
18
18
13
13
18
18
18
18
18
18
3
8
8
18
18
46
46
100
100
200
200
350
350
100
100
200
150
300
150
300
150
300
150
300
150
300
33 92 13
550
33 93 13
33 02 12
33 03 12
type
33
33
33
33
33
33
33
33
33
33
33
33
33
18
38
39
42
43
52
53
62
63
72
73
82
83
E
max
min
max
240
315
460
412
635
455
680
510
735
560
785
640
865
10
12
12
15
15
20
20
30
30
50
50
60
60
25
30
30
35
35
49
49
64
64
83
83
102
102
445
515
660
617
840
720
945
780
1005
875
1100
1030
1255
760
760
690
1175
930
1405
1180
1900
1700
2415
2040
2400
2320
205
200
200
205
205
265
265
270
270
315
315
390
390
520
445
230
763
295
950
500
1390
965
1855
1255
1760
1455
0.80
1.00
1.00
1.60
1.60
3.70
3.70
6.00
6.00
12.00
12.00
22.50
22.50
0.39
0.55
0.55
0.75
0.75
0.73
0.73
2.00
2.00
3.20
3.20
4.75
4.75
150
670
70
115
127
1155
1671
1670
2870
485
1001
1000
2200
41.00
44.50
5.50
7.20
550
300
895
70
115
127
1380
1696
1695
2795
485
801
800
1900
41.00
44.50
5.50
7.20
1000
1000
150
300
770
995
100
100
160
160
1415
1640
2300
2325
645
645
1530
1330
92.00
92.00
9.50
9.50
E L 37.5 L 37.5
weight [kg]
Lmin
+per
100mm
d3
min
max
3.21
Weld-on brackets
Type 35
F
B
d3
Weld-on brackets
type 35 19 13 to 35 20 19
Serial standard design.
type
35
35
35
35
35
35
35
35
35
35
35
19
29
39
49
59
69
79
89
99
09
20
nom. load
[kN]
d3
weight
[kg]
3
4
8
18
46
100
200
350
550
1000
2000
25
25
30
35
54
90
110
150
180
390
520
32
32
37
43
54
79
100
130
230
310
320
12
12
12
13
15
23
25
34
40
58
65
10
10
12
15
20
30
50
60
70
100
120
30
30
34
40
50
75
90
115
155
212
245
9.5
9.5
10.5
12.5
16.5
22.5
35.5
45
50
72
87
42
42
46
52
65
95
115
160
220
305
320
13
13
15
18
27
45
55
75
80
100
135
0.2
0.2
0.3
0.5
1.0
3.7
7.9
17.0
41.0
132.0
215.0
13
13
13
13
19
19
19
19
11
13
19
Fit: H7 f8.
type
35
35
35
35
35
35
35
35
35
35
35
19
29
39
49
59
69
79
89
99
09
20
13
13
13
13
19
19
19
19
11
13
19
=15
= 6
=30
= 6
=45
= 6
3.0
3.0
3.0
3.0
5.5
7.5
10.5
14.5
15.0
14.0
23.0
3.0
3.0
3.0
4.0
7.0
9.5
13.5
18.0
20.0
17.0
3.0
3.0
3.0
5.0
8.0
11.0
15.5
21.0
23.0
19.0
3.22
Energy absorber
Type 32
Energy absorber
type 32 18 16 to 32 92 16
Serial standard design.
SG
length adjustment
d3
d3
t1
t2
type
32
32
32
32
32
32
32
32
18
38
42
52
62
72
82
92
16
16
16
16
16
16
16
16
nom. load
[kN]
3
8
18
46
100
200
350
550
s
t1
t2
5.0
5.0
5.0
5.0
6.5
9.5
12.5
0-20
0-22
0-25
0-25
0-25
0-28
0-30
0-20
0-22
0-25
0-25
0-25
0-28
0-30
56
60
80
115
130
195
250
Individual application
The standard designs shown in the table above
represents only part of the suppliable range.
The products can be adapted by LISEGA to the
particular requirements of the user.
This applies especially to those cases where
loads and strokes exceed standard parameters.
Order details:
energy absorber
type 32 .. 16
t1 = mm, t2 = mm
marking: ...
3.23
d3
10
12
15
20
30
50
60
E
300
85 50
355
95 50
440 125 75
490 150 75
575 165 75
715 175 75
945 225 75
on request
SG
weight
[kg]
18
50
58
65
100
130
165
15
20
22.5
30
45
60
75
9
10
12
16
22
35
44
0.8
1.8
3.6
11.5
18.5
47.0
105.0
3
Snubbers type 31 prior to delivery
Type 31
Commissioning of type 30
3.24
Viscoelastic damper
Type 3D .. 44-D
Selection and dimensions
Viscoelastic damper
type 3D 03 44-D
to 3D H1 44-D
E-middle
type
Order details:
viscoelastic damper
type 3D .. 44-D
marking:
nominal load: kN
offset:
x: mm, y: mm, z: mm
operating temperature: C
3D 03 44-D
3D 05 44-D
3D 10 44-D
3D 20 44-D
3D 30 44-D
3D 40 44-D
3D 60 44-D
3D 80 44-D
3D H1 44-D
nom. load
[kN]
2.5
5
10
20
30
40
60
80
100
B
C
M
weight
[kg]
240
240
240
280
320
335
350
390
405
270
290
340
390
440
470
510
535
580
215
230
270
320
350
380
410
430
460
8
8
10
12
15
18
20
25
30
34
34
38
42
46
46
53
59
59
14
14
18
22
26
26
33
39
39
M16
M16
M16
M16
M16
M16
M16
16
19
31
51
84
109
149
191
246
type
nom. load
[kN]
5
[Hz]
35
[Hz]
3D 03 44-D
3D 05 44-D
3D 10 44-D
3D 20 44-D
3D 30 44-D
3D 40 44-D
3D 60 44-D
3D 80 44-D
3D H1 44-D
2.5
5
10
20
30
40
60
80
100
15.7
27.8
47.3
89.3
143.9
162.7
189.4
229.9
340.2
12.0
21.1
36.0
67.9
109.4
123.7
144.0
174.8
258.7
7.3
14.0
12.9
23.7
21.9
37.4
41.4
94.0
66.7 148.7
75.4 229.9
87.8 293.0
106.5 367.3
157.7 554.1
3.25
10.2
18.0
30.7
57.9
93.2
105.4
122.7
148.9
220.4
9.1
16.0
27.4
51.6
83.2
94.1
109.5
132.9
196.7
8.3
14.7
25.0
47.3
76.2
86.1
100.3
121.7
180.1
C
M
B
7.7
13.7
23.3
44.0
70.9
80.1
93.3
113.2
167.6
5
[Hz]
35
[Hz]
10.8
18.3
28.8
72.5
114.5
177.1
225.8
283.0
427.0
5.1
8.6
13.6
34.2
54.1
83.6
106.6
133.7
201.7
8.6
14.6
22.9
57.8
91.5
141.2
180.0
225.6
340.4
7.0
12.0
18.9
47.5
75.1
116.2
148.1
185.6
280.0
6.0
10.2
16.1
40.6
64.2
99.2
126.5
158.5
239.2
5.4
9.1
14.4
36.3
57.4
88.7
113.1
141.8
214.0
Viscoelastic dampers
Type 3D .. 33-L, 3D .. 55-L
Selection and dimensions
E-middle
s
The choice of damper size depends on the nominal load. The offset in horizontal and vertical directions must be taken into account for the cold
load position. For LISEGA dampers in the 33-L
and 55-L series it amounts to 30mm and
50mm respectively in horizontal / vertical
directions.
3D
3D
3D
3D
3D
3D
05
10
15
25
40
50
3D
3D
3D
3D
3D
3D
05
10
15
25
40
50
type
3D
3D
3D
3D
3D
3D
05
10
15
25
40
50
..-L
..-L
..-L
..-L
..-L
..-L
C
B
C
M
weight
[kg]
5
10
15
25
40
50
270
270
280
290
300
380
260
295
335
425
540
590
195
230
265
340
440
480
10
10
15
20
25
30
38
38
42
46
53
59
18
18
22
26
33
39
M16
M16
M16
M16
M16
M16
21
30
48
106
193
288
nom. load
[kN]
B
C
M
weight
[kg]
5
10
15
25
40
50
390
390
410
410
490
500
325
360
420
525
590
730
260
290
345
420
470
590
10
10
20
20
25
30
38
42
46
46
53
59
18
22
26
26
33
39
M16
M16
M16
M16
M16
M16
39
49
107
158
282
489
55-L
55-L
55-L
55-L
55-L
55-L
nom. load
[kN]
5
[Hz]
35
[Hz]
5
[Hz]
5
10
15
25
40
50
9.6
18.6
28.2
52.2
98.0
166.0
7.3
14.1
21.5
39.8
74.8
126.7
4.5
8.7
13.2
24.4
45.8
77.7
11.0
22.8
38.9
95.0
206.4
416.4
6.3
12.1
18.4
34.0
63.8
108.1
5.6
10.8
16.4
30.4
57.0
96.7
nom. load
[kN]
33-L
33-L
33-L
33-L
33-L
33-L
type
B
M
Viscoelastic dampers
type 3D 05 33-L
to 3D 50 55-L
When selecting viscoelastic dampers the temperature on site is important. Series 3D .. ..-L is
designed for use in a temperature range from
-10C up to +40C. In this temperature range the
damper functions with relatively constant characteristics. The values were determined for a
temperature of 20C.
5.1
9.9
15.1
27.8
52.3
88.6
4.8
9.2
14.0
25.9
48.7
82.5
Order details:
viscoelastic damper
type 3D .. ..
marking:
nominal load: kN
offset:
x: mm, y: mm z: mm
operating temperature: C
35
[Hz]
8.2
17.1
29.3
71.5
155.3
313.4
4.9
10.2
17.5
42.8
92.9
187.5
7.0
14.5
24.8
60.5
131.5
265.4
6.2
12.9
22.0
53.8
116.9
235.9
5.6
11.8
20.1
49.1
106.7
215.2
5.2
10.9
18.6
45.5
99.0
199.7
3.26
Rigid struts
Type 39
Selection
When selecting rigid struts from the
below tables, these points must
be noted:
type
39 .0
39 .0
39 .0
39 .0
39 .0
39 .1
39 .1
39 .1
39 .1
39 .2
39 .2
39 .2
39 .2
39 .3
39 .3
39 .3
39 .3
39 .4
39 .4
39 .4
39 .4
39 .5
34
44
54
74
84
04
24
54
74
04
24
54
74
04
24
54
74
04
24
54
74
04
18
adjustment
range
E middle
300
400
500
600
750
850
1100
1350
1600
1850
2100
2350
2600
2850
3100
3350
3600
3850
4100
4350
4600
4850
1.4
1.9
2.3
2.4
2.2
2.9
3.6
3.4
2.3
3.0
3.7
4.9
3.3
4.1
4.9
(5.8)
(6.6)
(7.4)
4.5
5.5
6.6
7.6
12.5
14.1
15.7
6.5
8.0
10
11
13
15
16
(18)
(19)
(21)
(23)
450
550
650
900
900
1150
1400
1650
1900
2150
2400
2650
2900
3150
3400
3650
3900
4150
4400
4650
4900
5150
375
475
575
750
825
1000
1250
1500
1750
2000
2250
2500
2750
3000
3250
3500
3750
4000
4250
4500
4750
5000
46
100
200
350
7.0
8.5
8.8
7.6
9.1
13
11
13
14
16
18
20
22
24
(26)
(28)
(30)
(31)
17
21
25
29
33
37
41
45
49
53
57
61
(65)
(69)
(73)
(77)
load group
weight [kg]
15.9
22
28
34
40
46
52
58
65
71
77
83
89
95
101
107
113
(119)
(126)
reduced loads for overlength (below red line) see diagram on p. 3.28
slenderness ratio 150, for greater lengths the slenderness ratio can range between
150 and 200; the weight of these rigid struts is given in brackets.
The type designation is to be completed in the 3rd place with the load group.
3.27
40
47
57
67
77
86
96
106
115
125
135
144
154
164
174
183
193
203
550 1000
load group
type
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
.0
.0
.1
.1
.1
.1
.1
.1
.1
.2
.2
.2
.2
.3
.3
.3
.3
.4
.4
.4
.4
.5
.5
.5
.5
.6
83
93
03
13
23
33
23
53
73
03
23
53
73
03
23
53
73
03
23
53
73
03
23
53
73
03
adjustment
range
E middle
800
900
1000
1100
1200
1300
1100
1350
1600
1850
2100
2350
2600
2850
3100
3350
3600
3850
4100
4350
4600
4850
5100
5350
5600
5850
950
1050
1150
1250
1350
1450
1400
1650
1900
2150
2400
2650
2900
3150
3400
3650
3900
4150
4400
4650
4900
5150
5400
5650
5900
6150
875
975
1075
1175
1275
1375
1250
1500
1750
2000
2250
2500
2750
3000
3250
3500
3750
4000
4250
4500
4750
5000
5250
5500
5750
6000
weight [kg]
71
77
82
88
121
139
157
175
193
211
229
247
265
283
301
319
337
355
372
390
(408)
(426)
172
182
192
231
247
270
294
350
379
409
438
467
497
526
555
585
614
644
673
702
732
761
790
600
500
400
600
500
400
300
300
200
200
100
80
100
80
60
50
40
60
50
40
30
30
20
20
10
8
10
8
6
5
4
6
5
4
1500
2000
2500
3000
3500
4000
4500
5000
5500
P235GH
P355NH
strut paddle P250GH
C45E+QT
S355J2
42CrMo4+QT
6000
length [mm]
left-hand thread
SW2
SG
d3
right-hand thread
load [kN]
1000
800
E 75
E 150
type
39
39
39
39
39
39
39
39
39
2.
3.
4.
5.
6.
7.
8.
9.
0.
.4
.4
.4
.4
.4
.4
.4
.3
.3
nom. load
[kN]
E
d3
min
max
4
8
18
46
100
200
350
550
1000
30
38
45
60
82
120
150
210
293
(30) 38
(40) 43/57
(40) 57
61
(60) 83
(75) 102
115
115/127
159/169
10
12
15
20
30
50
60
70
100
300
300
300
400
400
500
750
800
1000
1900
2150
2400
2150
2900
3150
2900
3400
3650
SW1
27
32
36
60
60
70/75
95
110
155
SW2
SG
(27) 32
(32) 36/46
(32) 46
50
(50) 70
(60) 85
100
100/110
135/145
9
10
12
16
22
35
44
49
70
() Values in brackets:
up to Emax = 650mm.
Depending on load group and length
the struts are subject to alternative
manufacturing technoloies which
may result in designs different to
the shown.
Order details:
rigid strut type 39 .. ..
3.28
Dynamic clamps
Selection overview OD 33.7 - OD 88.9
OD 33.7 (ND 25)
permissible load [kN]
d1
type 100 250 350 450 500 510 530 560 580 600C
Emax
B1
10
10
10
10
110
155
160
160
75
75
75
75
50
50
50
50
20
20
20
20
9
9
9
9
Emax
B1
12
12
10
10
130
175
175
175
85
85
85
85
50
50
50
50
20
20
20
20
9
9
9
9
Emax
B1
12
12
10
10
130
175
175
175
90
90
90
90
50
50
50
50
20
20
20
20
9
9
9
9
Emax
B1
15
12
12
12
150
190
195
195
110
110
110
110
50
50
50
50
25
25
25
25
9
9
9
9
Emax
B1
15
12
12
12
160
210
215
215
120
120
120
120
50
50
50
50
25
25
25
25
9
9
9
9
Emax
B1
160
210
215
215
125
125
125
125
50
50
50
50
25
25
25
25
9
9
9
9
B1
185
230
235
235
150
150
150
150
50
50
50
50
30
30
30
30
11
11
11
11
36 03 11 4.0
36 03 21
36 03 31
36 03 41
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
3.2
4.0
3.2
2.4
max wt.
load gr. [kg]
2
2
2
2
0.9
1.1
1.1
1.1
d1
8.0
8.0
7.2
6.3
5.8
4.0
4.0
4.0
3.1
4.0
3.3
2.5
max wt.
load gr. [kg]
3
3
2
2
1.2
1.4
1.3
1.3
B1
36 04 11 8.0
36 04 21
36 04 31
36 04 41
type 36 .. .1
36 05 11 8.0
36 05 21
36 05 31
36 05 41
8.0
7.9
7.2
6.3
5.9
4.0
4.0
4.0
3.2
4.0
3.2
2.4
max wt.
load gr. [kg]
3
3
2
2
1.2
1.5
1.4
1.4
36 06 11
36 06 21
36 06 31
36 06 41
16
15
12
8.0
8.0
8.0
8.0
8.0
7.9
5.1
6.5
5.3
3.8
max wt.
load gr. [kg]
4
3
3
3
1.9
2.2
2.2
2.2
36 07 11
36 07 21
36 07 31
36 07 41
16
14
13
8.0
8.0
8.0
8.0
8.0
7.6
4.9
6.3
5.1
3.8
max wt.
load gr. [kg]
4
3
3
3
2.2
2.7
2.6
2.6
36 08 11
36 08 21
36 08 31
36 08 41
16
14
13
8.0
8.0
8.0
8.0
8.0
7.6
4.9
6.3
5.1
3.8
15
12
12
12
max wt.
load gr. [kg]
4
3
3
3
2.2
2.7
2.7
2.7
3.29
27
24
22
18
18
18
17
17
15
9.8
12
10
7.2
20
15
15
15
Emax
max wt.
load gr. [kg]
5
4
4
4
3.8
4.4
4.3
4.3
Dynamic clamps
Selection overview OD 108.0 - OD 159.0
OD 108.0 (ND 100)
permissible load [kN]
d1
type 100 250 350 450 500 510 530 560 580 600C
36 10 11 32
36 10 21
36 10 31
36 10 41
29
26
18
18
18
16
16
14
9.1
11
9.3
6.8
20
15
15
15
Emax
B1
205
265
270
270
165
165
165
165
50
50
50
50
35
35
30
30
11
11
11
11
max wt.
load gr. [kg]
5
4
4
4
5.0
6.2
5.3
5.3
A
29
46
26
18
46
18
46
18
42
16
41
16
41
13
35
9.0
22
11
28
9.1
21
6.8
14
20
15
20
15
20
15
20
210
270
280
280
290
280
290
175 50 35
175 50 35
175 100 60
175 50 30
175 100 60
175 50 30
175 100 60
11
11
13
11
13
11
13
max wt.
load gr. [kg]
5
4
5
4
5
4
5
5.1
6.5
12.3
5.5
12.4
5.6
12.4
d1
B1
B1
type 36 .. .1
26
18
46
18
46
17
43
16
42
16
41
13
35
9.1
22
11
29
8.5
23
6.5
16
20
15
20
15
20
15
20
Emax
225
275
285
285
295
285
295
B1
190 50 35
190 50 30
190 100 60
190 50 30
190 100 60
190 50 30
190 100 60
11
11
13
11
13
11
13
max wt.
load gr. [kg]
5
4
5
4
5
4
5
5.8
6.3
13.5
6.1
13.7
6.1
13.7
d1
36 13 11 31
36 13 21
36 13 24 46
36 13 31
36 13 34
36 13 41
36 13 44
36 11 11 31
36 11 21
36 11 24 46
36 11 31
36 11 34
36 11 41
36 11 44
Emax
36 14 11 31
36 14 21
36 14 24 60
36 14 31
36 14 34
36 14 41
36 14 44
28
18
43
46
45
20
15
30
15
20
15
20
230
285
320
295
305
295
305
Emax
55
26
18
50
Emax
16
40
16
41
16
40
13
34
8.9
22
11
29
8.5
23
6.5
16
B1
200 50 35
200 50 30
200 100 60
200 50 30
200 100 60
200 50 30
200 100 60
11
11
13
11
13
11
13
max wt.
load gr. [kg]
5
4
6
4
5
4
5
6.1
6.7
16.9
6.4
14.5
6.4
14.5
B1
type 36 .. .4
36 16 11 30
36 16 21
36 16 24 59
36 16 31
36 16 34
36 16 41
36 16 44
28
54
25
18
49
18
43
46
44
16
40
16
41
15
40
13
34
8.8
22
11
28
8.8
23
6.7
17
20
15
30
15
20
15
20
245
300
335
310
320
310
320
B1
220 50 35
220 50 30
220 100 60
220 50 30
220 100 60
220 50 30
220 100 60
11
11
13
11
13
11
13
max wt.
load gr. [kg]
5
4
6
4
5
4
5
6.8
7.5
18.7
7.2
16.2
7.2
16.2
3.30
Dynamic clamps
Selection overview OD 168.3 - OD 219.1
OD 168.3 (ND 150)
permissible load [kN]
d1
type 100 250 350 450 500 510 530 560 580 600C
d1
B1
36 17 11
36 17 12
36 17 21
36 17 22
36 17 24
36 17 31
36 17 32
36 17 34
36 17 41
36 17 42
36 17 44
29
50
270
270
315
315
340
320
320
345
320
320
345
Emax
100
54
95
24
36
18
35
49
20
30
15
20
30
15
15
30
15
15
30
59
26
46
Emax
87
17
29
43
76
16
28
40
16
18
70
15
18
69
13
18
58
8.6
14
38
11
16
49
9
13
40
6.8
9.8
29
B1
230 50 35
240 50 45
230 50 30
240 50 40
230 100 60
230 50 30
240 50 40
240 100 80
230 50 30
240 50 40
240 100 80
11
11
11
11
13
11
11
16
11
11
16
max wt.
load gr. [kg]
5
6
4
5
6
4
4
6
4
4
6
36 19 11 50
36 19 12 65
36 19 21
36 19 22
36 19 24 100
36 19 31
36 19 32
36 19 34
36 19 41
36 19 42
36 19 44
type 36 .. .1/2
d1
B1
type 36 .. .4
46
59
30
30
20
30
30
15
20
30
15
20
30
285
285
355
355
355
350
350
375
350
350
375
Emax
95
41
54
33
52
87
29
45
76
27
42
70
18
39
68
18
39
67
18
34
57
14
23
37
17
25
47
13
20
38
10
15
29
B1
265 50 45
275 50 45
265 50 40
275 50 45
265 100 80
265 50 40
275 50 45
265 100 80
265 50 40
275 50 45
265 100 80
11
13
11
13
13
11
13
16
11
13
16
max wt.
load gr. [kg]
6
6
5
6
6
4
5
6
4
5
6
12.7
14.1
13.3
18.0
29.8
12.3
15.5
31.1
12.4
15.5
31.1
36 22 11 49
36 22 12 65
36 22 21
36 22 22
36 22 24 100
36 22 31
36 22 32
36 22 34
36 22 41
36 22 42
36 22 44
45
59
93
41
55
32
50
85
28
44
74
26
41
68
18
40
67
18
40
66
18
35
56
14
22
36
17
26
47
13
20
38
10
15
28
30
30
20
30
30
15
20
30
15
20
30
310
310
385
385
385
370
370
395
370
370
395
B1
290 50 45
300 50 45
290 50 40
300 50 45
290 100 80
290 50 40
300 50 45
290 100 80
290 50 40
300 50 45
290 100 80
11
13
11
13
13
11
13
16
11
13
16
max wt.
load gr. [kg]
6
6
5
6
6
4
5
6
4
5
6
3.31
7.7
11.4
8.1
11.0
19.5
7.7
10.4
26.8
7.7
10.4
26.9
14.4
16.0
14.2
20.2
34.1
12.3
16.4
34.7
12.3
16.4
34.7
Dynamic clamps
Selection overview OD 244.5 - OD 273.0
OD 244.5 (ND 225)
100
149
45
59
92
137
41
53
32
50
85
125
28
44
74
109
26
40
68
100
18
37
63
95
18
37
62
93
18
33
55
83
14
22
36
54
18
24
44
66
14
18
34
52
10
13
26
38
30
30
20
30
30
50
15
20
30
30
15
20
30
30
B1
320
320
400
400
400
415
395
395
420
420
395
395
420
420
315
330
315
330
315
330
315
330
315
330
315
330
315
330
50
50
50
50
100
100
50
50
100
100
50
50
100
100
45
45
40
45
80
90
40
45
80
90
40
45
80
90
11
13
11
13
13
16
11
13
16
16
11
13
16
16
max wt.
load gr. [kg]
6
6
5
6
6
7
4
5
6
6
4
5
6
6
15.3
17.0
15.3
21.6
36.0
49.2
13.7
17.9
36.6
44.3
13.7
17.9
36.6
44.3
d1
49
65
B1
36 24 11
36 24 12
36 24 21
36 24 22
36 24 24
36 24 25
36 24 31
36 24 32
36 24 34
36 24 35
36 24 41
36 24 42
36 24 44
36 24 45
Emax
100
150
44
59
93
137
41
54
32
50
85
125
28
44
74
109
26
40
68
101
18
38
66
97
18
38
64
96
18
34
55
83
14
22
35
54
18
25
46
68
14
19
36
53
11
15
27
40
30
30
20
30
30
50
15
20
30
30
15
20
30
30
B1
335
335
410
410
410
425
410
410
435
435
410
410
435
435
340
350
340
350
340
350
340
350
340
350
340
350
340
350
50
50
50
50
100
100
50
50
100
100
50
50
100
100
45
45
40
45
80
90
40
45
80
90
40
45
80
90
11
13
11
13
13
16
11
13
16
16
11
13
16
16
max wt.
load gr. [kg]
6
6
5
6
6
7
4
5
6
6
4
5
6
6
16.5
18.2
16.0
22.2
37.3
51.0
14.4
18.8
38.3
46.5
14.4
18.9
38.3
46.5
48
65
110
165
44
59
101
151
40
54
88
130
32
50
84
124
B1
type 36 .. .1/2
d1
49
65
36 26 11
36 26 12
36 26 21
36 26 22
36 26 24
36 26 25
36 26 31
36 26 32
36 26 34
36 26 35
36 26 41
36 26 42
36 26 44
36 26 45
Emax
27
43
73
108
25
40
67
100
18
37
63
95
18
37
62
94
18
32
53
81
13
21
34
52
17
24
44
67
14
18
36
52
10
13
27
38
30
30
50
50
20
30
30
50
15
20
30
30
15
20
30
30
Emax
B1
345
345
360
360
420
420
420
435
435
435
460
460
435
435
460
460
345
355
345
355
345
355
345
355
345
355
345
355
345
355
345
355
50
50
100
100
50
50
100
100
50
50
100
100
50
50
100
100
45
45
80
90
40
45
80
90
40
45
80
90
40
45
80
90
11
13
13
16
11
13
13
16
11
13
16
16
11
13
16
16
max wt.
load gr. [kg]
6
6
7
7
5
6
6
7
4
5
6
6
4
5
6
6
17.2
18.9
34.9
42.4
16.5
22.8
38.4
52.5
15.4
20.1
41.5
49.5
15.4
20.1
41.5
49.5
type 36 .. .4/5
3.32
Dynamic clamps
Selection overview OD 323.9 - OD 355.6
OD 323.9 (ND 300)
permissible load [kN]
d1
type 100 250 350 450 500 510 530 560 580 600C
d1
B1
type 36 .. .1/2/3
Emax
B1
20
30
30
50
50
20
30
30
50
50
15
20
30
30
50
15
20
30
30
50
380
380
380
395
395
450
450
450
465
465
450
470
470
470
485
450
470
470
470
485
400
415
430
415
430
400
415
430
415
430
400
415
430
415
430
400
415
430
415
430
60
60
60
120
120
60
60
60
120
120
60
60
60
120
120
60
60
60
120
120
40
45
60
90
120
40
45
60
90
120
40
45
60
90
120
40
45
60
90
120
11
13
13
16
16
11
13
13
16
21
11
13
13
16
21
11
13
13
16
21
Emax
B1
395
395
395
410
410
480
480
480
495
495
475
495
495
495
510
475
495
495
495
510
435
445
465
445
465
435
445
465
445
465
435
445
465
445
465
435
445
465
445
465
60
60
60
120
120
60
60
60
120
120
60
60
60
120
120
60
60
60
120
120
40
45
60
90
120
40
45
60
90
120
40
45
60
90
120
40
45
60
90
120
11
13
13
16
16
11
13
13
16
21
11
13
13
16
21
11
13
13
16
21
36 32 11
36 32 12
36 32 13
36 32 14
36 32 15
36 32 21
36 32 22
36 32 23
36 32 24
36 32 25
36 32 31
36 32 32
36 32 33
36 32 34
36 32 35
36 32 41
36 32 42
36 32 43
36 32 44
36 32 45
44
65
100
163
200
40
59
100
149
200
37
56
88
137
177
31
49
88
123
186
27
43
73
107
172
25
40
69
99
165
18
38
71
98
157
18
38
70
97
155
18
32
59
82
145
13
21
38
53
94
17
25
48
69
117
14
19
37
56
91
11
15
27
42
71
max wt.
load gr. [kg]
5
6
6
7
7
5
6
6
7
7
4
5
6
6
7
4
5
6
6
7
20
24
34
52
72
21
28
38
61
86
20
25
39
56
85
19
25
39
56
85
d1
B1
type 36 .. .4/5
36 36 11
36 36 12
36 36 13
36 36 14
36 36 15
36 36 21
36 36 22
36 36 23
36 36 24
36 36 25
36 36 31
36 36 32
36 36 33
36 36 34
36 36 35
36 36 41
36 36 42
36 36 43
36 36 44
36 36 45
44
65
100
165
200
40
59
100
151
200
200
37
56
96
138
193
30
48
89
121
186
200
26
42
74
105
172
175
24
39
71
97
165
18
38
70
97
164
18
37
69
96
162
18
31
59
81
143
13
20
38
53
93
17
26
49
68
119
13
20
39
55
95
10
16
28
41
73
20
30
30
50
50
20
30
30
50
50
15
20
30
30
50
15
20
30
30
50
max wt.
load gr. [kg]
5
6
6
7
7
5
6
6
7
7
4
5
6
6
7
4
5
6
6
7
3.33
22
26
36
56
77
22
30
42
66
93
21
27
41
61
91
21
27
42
61
91
Dynamic clamps
Selection overview OD 368.0 - OD 406.4
OD 368.0 (ND 350)
B
B1
20
30
30
50
60
20
30
30
50
50
15
20
30
30
50
15
20
30
30
50
400
400
400
415
440
485
485
485
500
500
480
500
500
500
515
480
500
500
500
515
445
455
475
455
475
445
455
475
455
475
445
455
475
455
475
445
455
475
455
475
60
60
60
120
120
60
60
60
120
120
60
60
60
120
120
60
60
60
120
120
40
45
60
90
120
40
45
60
90
120
40
45
60
90
120
40
45
60
90
120
11
13
13
16
16
11
13
13
16
21
11
13
13
16
21
11
13
13
16
21
Emax
44
65
100
166
279
41
59
100
151
256
200
37
56
99
139
181
31
48
89
121
186
200
27
42
76
105
168
178
24
39
72
97
159
18
38
70
97
167
18
37
69
96
165
18
31
59
81
143
13
20
38
53
93
17
23
49
68
120
14
18
39
55
97
11
14
29
41
73
5
6
6
7
8
5
6
6
7
7
4
5
6
6
7
4
5
6
6
7
22
26
36
57
88
23
31
42
67
94
22
28
42
62
92
23
27
42
62
93
B1
type 36 .. .1/2/3
B1
36 37 11
36 37 12
36 37 13
36 37 14
36 37 15
36 37 21
36 37 22
36 37 23
36 37 24
36 37 25
36 37 31
36 37 32
36 37 33
36 37 34
36 37 35
36 37 41
36 37 42
36 37 43
36 37 44
36 37 45
max wt.
load gr. [kg]
d1
d1
Emax
350
338
307
36
54
100
137
232
30
48
89
120
186
290
291
26
41
77
105
172
244
266
24
38
71
97
165
229
18
37
69
96
164
226
250
18
36
68
94
162
223
247
18
31
58
80
142
215
231
13
20
37
52
92
161
17
25
48
67
118
161
14
19
39
55
96
126
10
15
29
41
72
94
20
30
30
50
60
20
30
30
50
50
60
15
20
30
30
50
60
15
20
30
30
50
60
B1
430
430
430
445
470
510
510
510
525
525
580
510
530
530
530
545
600
510
530
530
530
545
600
485
495
515
495
515
485
495
515
495
515
490
485
495
515
495
515
490
485
495
515
495
515
490
60
60
60
120
120
60
60
60
120
120
310
60
60
60
120
120
310
60
60
60
120
120
310
40
45
60
90
120
40
45
60
90
120
230
40
45
60
90
120
230
40
45
60
90
120
230
11
13
13
16
21
11
13
13
16
21
21
11
13
13
16
21
21
11
13
13
16
21
21
5
6
6
7
8
5
6
6
7
7
8
4
5
6
6
7
8
4
5
6
6
7
8
24
29
40
64
98
25
34
46
73
104
187
24
30
46
67
99
191
23
30
46
67
101
191
type 36 .. .4/5
A
d1
40
59
100
150
253
B1
43
65
100
163
277
36 41 11
36 41 12
36 41 13
36 41 14
36 41 15
36 41 21
36 41 22
36 41 23
36 41 24
36 41 25
37 41 27
36 41 31
36 41 32
36 41 33
36 41 34
36 41 35
37 41 37
36 41 41
36 41 42
36 41 43
36 41 44
36 41 45
37 41 47
max wt.
F load gr. [kg]
type 37 .. .7
3.34
Dynamic clamps
Selection overview OD 419.0 - OD 457.2
OD 419.0 (ND 400)
permissible load [kN]
d1
type 100 250 350 450 500 510 530 560 580 600C
d1
B1
type 36 .. .4/5
Emax
B1
20
30
30
50
60
20
30
30
50
50
60
15
20
30
30
50
60
15
20
30
30
50
60
440
440
440
455
480
530
530
530
545
545
595
520
540
540
545
560
605
520
540
540
545
560
605
495
510
525
510
525
495
510
525
510
525
500
495
510
525
510
525
500
495
510
525
510
525
500
60
60
60
120
120
60
60
60
120
120
310
60
60
60
120
120
310
60
60
60
120
120
310
40
45
60
90
120
40
45
60
90
120
230
40
45
60
90
120
230
40
45
60
90
120
230
11
13
13
16
21
11
13
13
16
21
21
11
13
13
16
21
21
11
13
13
16
21
21
Emax
B1
470
470
470
485
510
550
550
550
585
585
615
550
570
570
575
590
635
675
550
570
570
575
590
635
675
535
545
565
545
565
535
545
565
545
565
540
535
545
565
545
565
540
550
535
545
565
545
565
540
550
60
60
60
120
120
60
60
60
120
120
310
60
60
60
120
120
310
340
60
60
60
120
120
310
340
40
45
60
90
120
40
45
60
90
120
230
40
45
60
90
120
230
250
40
45
60
90
120
230
250
13
13
13
16
21
13
13
13
16
21
21
13
13
13
16
21
21
26
13
13
13
16
21
21
26
36 42 11
36 42 12
36 42 13
36 42 14
36 42 15
36 42 21
36 42 22
36 42 23
36 42 24
36 42 25
37 42 27
36 42 31
36 42 32
36 42 33
36 42 34
36 42 35
37 42 37
36 42 41
36 42 42
36 42 43
36 42 44
36 42 45
37 42 47
43
65
100
163
276
350
39
59
100
149
253
336
307
36
55
100
136
231
29
47
87
118
186
289
291
26
40
76
103
172
243
266
24
37
70
95
165
228
18
37
69
95
158
226
250
18
36
68
93
156
224
247
18
31
57
79
140
215
231
13
20
37
51
91
161
17
25
48
66
117
161
14
21
39
54
93
126
10
15
29
40
69
94
max wt.
load gr. [kg]
5
6
6
7
8
5
6
6
7
7
8
4
5
6
6
7
8
4
5
6
6
7
8
25
30
42
66
101
26
35
48
76
108
192
25
31
48
69
102
194
24
31
47
69
104
194
d1
B1
type 37 .. .7/8
36 46 11
36 46 12
36 46 13
36 46 14
36 46 15
36 46 21
36 46 22
36 46 23
36 46 24
36 46 25
37 46 27
36 46 31
36 46 32
36 46 33
36 46 34
36 46 35
37 46 37
37 46 38
36 46 41
36 46 42
36 46 43
36 46 44
36 46 45
37 46 47
37 46 48
42
65
100
160
273
350
550
38
59
100
147
250
336
504
35
55
100
134
229
29
46
87
115
186
289
433
26
40
76
100
172
242
364
24
37
70
92
165
228
18
36
68
93
166
225
342
18
35
66
92
163
222
337
18
30
56
78
139
214
321
13
19
37
51
90
160
223
16
25
47
65
116
160
223
13
20
38
53
94
125
170
10
15
29
40
70
94
125
20
30
30
50
60
20
30
30
50
50
60
15
20
30
30
50
60
70
15
20
30
30
50
60
70
max wt.
load gr. [kg]
5
6
6
7
8
5
6
6
7
7
8
4
5
6
6
7
8
9
4
5
6
6
7
8
9
3.35
29
34
47
72
111
29
38
52
84
118
203
27
35
52
74
114
208
294
26
34
52
75
115
208
294
Dynamic clamps
Selection overview OD 508.0 - OD 558.8
OD 508.0 (ND 500)
B
B1
30
50
60
70
70
30
50
50
60
60
60
70
30
30
50
60
60
70
30
30
30
50
50
70
515
530
560
600
600
595
620
620
650
650
650
650
625
625
640
665
665
710
625
625
625
640
640
710
595
620
640
660
590
575
590
605
625
635
670
605
580
600
600
640
640
605
580
600
600
640
640
625
170
170
230
330
320
140
170
180
240
240
250
340
140
170
180
230
240
340
145
170
180
235
240
395
130
136
180
260
230
104
130
136
180
190
190
250
104
130
136
180
190
250
104
130
140
180
190
290
13
13
16
21
21
13
13
16
21
21
21
26
13
13
16
21
26
26
13
13
16
21
26
26
Emax
550
314
520
535
45
73
108
153
213
69
95
131
213
235
269
446
488
58
80
110
179
197
227
375
447
54
75
104
168
184
212
352
53
75
102
166
183
340
430
52
74
101
164
180
336
427
45
71
95
156
170
319
394
31
49
72
109
132
222
31
50
74
110
134
275
24
39
58
84
105
215
18
29
43
62
77
158
6
7
8
9
9
6
7
7
8
8
8
9
6
6
7
8
8
9
6
6
6
7
7
9
43
66
105
187
213
41
66
90
150
181
200
298
42
63
92
148
182
318
42
63
92
138
173
397
37 56 11
37 56 12
37 56 13
37 56 14
37 56 17
37 56 21
37 56 22
37 56 23
37 56 24
37 56 25
37 56 26
37 56 28
37 56 31
37 56 32
37 56 33
37 56 34
37 56 35
37 56 38
37 56 39
37 56 41
37 56 42
37 56 43
37 56 44
37 56 45
37 56 48
37 56 49
81
133
181
269
365
350
550
550
62
100
142
206
295
313
504
550
550
44
72
108
153
213
67
94
131
212
234
269
433
485
537
B1
type 37 .. .1/2/3/4/5/6
Calculation of intermediate values: linear
interpolation.
57
79
110
178
197
226
364
408
473
53
74
103
167
184
211
342
53
75
102
166
182
340
382
443
52
74
101
164
180
336
377
437
45
72
95
155
170
319
355
396
31
49
72
108
132
222
276
31
50
72
108
132
222
276
24
39
57
82
103
169
216
18
29
42
61
76
125
159
30
50
60
70
70
30
50
50
60
60
60
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
B1
550
565
595
635
635
640
655
655
680
680
680
725
650
650
665
695
695
735
735
650
650
665
695
695
735
735
645
670
690
705
645
630
640
655
675
685
720
655
630
650
650
690
690
655
665
630
650
650
690
690
655
665
170
170
230
330
320
140
170
180
240
240
250
340
140
170
180
230
240
340
400
145
170
180
235
240
340
400
130
136
180
260
230
104
130
136
180
190
190
250
104
130
136
180
190
250
290
104
130
136
180
190
250
290
F minus 1mm;
B1 plus 2mm
(see p. 3.44).
max wt.
F load gr. [kg]
13
13
16
21
21
13
13
16
21
21
21
26
13
13
16
21
21
26
26
13
13
16
21
21
26
26
6
7
8
9
9
6
7
7
8
8
8
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
47
70
111
195
228
45
70
96
157
190
210
337
46
67
96
154
191
334
410
46
67
100
154
191
334
410
d1
350
550
62
101
142
206
294
B1
82
133
182
269
365
37 51 11
37 51 12
37 51 13
37 51 14
37 51 17
37 51 21
37 51 22
37 51 23
37 51 24
37 51 25
37 51 26
37 51 28
37 51 31
37 51 32
37 51 33
37 51 34
37 51 35
37 51 38
37 51 41
37 51 42
37 51 43
37 51 44
37 51 45
37 51 48
max wt.
load gr. [kg]
d1
Emax
type 37 .. .7/8/9
3.36
Dynamic clamps
Selection overview OD 609.6 - OD 660.4
OD 609.6 (ND 600)
permissible load [kN]
d1
type 100 250 350 450 500 510 530 560 580 600C
d1
B1
type 37 .. .1/2/3/4/5/6
Calculation of intermediate values: linear
interpolation.
B1
30
50
60
70
70
70
30
50
50
60
60
60
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
575
590
620
660
660
660
670
685
685
715
715
715
760
685
685
700
730
730
770
770
685
685
700
730
730
770
770
700
720
740
760
695
705
680
690
705
725
735
770
705
680
700
700
740
740
705
720
680
700
700
740
740
720
730
170
180
230
330
320
335
140
170
180
240
240
250
340
140
170
180
230
240
340
400
145
170
180
235
240
400
435
130
136
180
260
230
250
104
130
136
180
190
190
250
104
130
136
180
190
250
290
104
130
136
180
190
290
340
16
16
16
16
21
21
16
16
16
21
21
21
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
Emax
B1
605
620
650
690
690
690
700
715
715
750
750
750
790
715
715
730
755
755
795
795
715
715
730
755
755
795
795
750
770
790
810
745
755
730
745
760
775
785
820
755
730
755
755
790
790
755
770
730
755
755
790
790
770
780
170
185
230
330
320
335
145
175
180
240
240
250
340
145
175
180
230
240
340
400
145
180
180
235
240
400
435
130
136
180
260
230
250
110
136
136
180
190
190
250
110
136
136
180
190
250
290
110
136
136
180
190
290
340
16
16
16
16
21
21
16
16
16
21
21
21
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
37 61 11
37 61 12
37 61 13
37 61 14
37 61 17
37 61 18
37 61 21
37 61 22
37 61 23
37 61 24
37 61 25
37 61 26
37 61 28
37 61 31
37 61 32
37 61 33
37 61 34
37 61 35
37 61 38
37 61 39
37 61 41
37 61 42
37 61 43
37 61 44
37 61 45
37 61 48
37 61 49
82
128
182
272
368
543
550
550
62
101
143
206
297
412
501
550
550
45
73
108
155
214
297
67
94
131
211
233
268
430
483
533
57
79
110
177
196
225
362
406
471
53
75
103
167
183
211
340
52
75
102
164
181
338
380
440
52
74
100
163
179
334
375
435
427
45
71
95
154
170
317
355
394
416
30
49
72
108
131
221
275
31
50
72
108
131
275
346
24
39
56
82
102
214
268
18
29
42
60
75
158
209
max wt.
load gr. [kg]
6
7
8
9
9
9
6
7
7
8
8
8
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
50
73
115
199
239
299
49
75
101
166
199
220
359
50
72
101
163
201
357
438
50
72
106
163
201
438
510
d1
B1
type 37 .. .7/8/9
3.37
Emax
37 66 11
37 66 12
37 66 13
37 66 14
37 66 17
37 66 18
37 66 21
37 66 22
37 66 23
37 66 24
37 66 25
37 66 26
37 66 28
37 66 31
37 66 32
37 66 33
37 66 34
37 66 35
37 66 38
37 66 39
37 66 41
37 66 42
37 66 43
37 66 44
37 66 45
37 66 48
37 66 49
82
127
182
272
369
545
550
550
62
101
143
206
298
413
500
550
535
45
73
109
155
215
298
69
96
131
211
233
267
429
483
488
58
81
110
177
196
225
361
406
447
55
76
103
166
183
210
339
54
76
102
166
182
338
380
430
53
75
101
164
180
334
375
427
427
46
73
95
155
170
317
355
394
416
31
50
72
108
132
221
275
32
51
72
108
132
275
346
25
39
56
82
103
215
268
18
30
42
61
76
158
209
30
50
60
70
70
70
30
50
50
60
60
60
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
max wt.
load gr. [kg]
6
7
8
9
9
9
6
7
7
8
8
8
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
51
78
120
207
252
316
56
86
105
175
209
231
382
57
84
106
171
209
377
460
57
89
111
171
209
460
536
Dynamic clamps
Selection overview OD 711.2 - OD 762.0
OD 711.2 (ND 700)
550
550
503
550
550
484
550
58
81
110
179
198
227
363
407
486
55
76
103
168
185
213
341
54
76
102
167
183
338
381
455
53
75
101
165
181
334
376
449
427
46
73
95
156
170
317
355
407
416
31
50
73
109
133
221
275
32
51
73
109
133
284
347
25
40
57
83
103
222
269
18
30
43
61
76
163
210
30
50
60
70
70
70
30
50
50
60
60
60
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
B1
635
650
680
720
720
720
725
745
745
770
770
770
815
740
740
755
780
780
825
825
740
740
755
780
780
785
825
800
825
840
860
880
810
780
795
810
830
840
875
810
780
805
805
845
845
810
820
780
805
805
845
845
820
835
170
190
230
330
355
335
145
175
180
240
240
250
340
145
175
180
230
240
340
400
145
180
180
235
240
400
435
130
136
180
260
260
250
110
136
136
180
190
190
250
110
136
136
180
190
250
290
110
136
136
180
190
290
340
16
16
16
16
21
21
16
16
16
21
21
21
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
max wt.
load gr. [kg]
6
7
8
9
9
9
6
7
7
8
8
8
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
54
83
127
213
245
331
59
87
111
178
217
240
396
59
89
112
175
217
394
483
59
94
117
175
217
458
567
45
73
109
156
186
299
69
96
131
213
235
270
432
d1
62
101
143
206
253
414
82
126
182
272
328
546
B1
type 37 .. .1/2/3/4/5/6
Calculation of intermediate values: linear
interpolation.
82
126
182
285
329
407
547
550
550
62
101
143
216
251
308
414
504
550
550
44
73
109
156
187
233
299
69
96
131
213
271
433
487
538
57
81
110
179
228
364
410
475
54
76
103
168
213
342
54
77
103
168
185
341
383
444
53
76
102
166
182
336
378
439
427
46
73
95
157
170
320
355
398
416
31
51
73
110
133
223
277
32
52
74
110
133
277
349
25
40
58
83
104
216
271
18
30
43
61
77
160
211
30
50
60
70
70
70
70
30
50
50
60
60
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
B1
665
680
710
750
750
750
750
760
775
775
800
800
845
765
765
780
805
805
850
850
765
765
780
805
805
850
850
850
875
895
910
930
935
860
835
845
860
880
925
860
835
855
855
895
895
860
870
835
855
855
895
895
870
885
170
190
235
330
345
370
335
145
175
180
240
250
340
145
175
180
230
240
340
400
145
180
180
235
240
400
435
130
136
180
260
260
260
250
110
136
136
180
190
250
110
136
136
180
190
250
290
110
140
140
180
190
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
58
85
133
226
249
276
349
63
92
117
186
249
417
63
89
117
182
225
411
504
63
94
123
182
225
504
582
d1
37 76 11
37 76 12
37 76 13
37 76 14
37 76 15
37 76 16
37 76 18
37 76 21
37 76 22
37 76 23
37 76 24
37 76 26
37 76 28
37 76 31
37 76 32
37 76 33
37 76 34
37 76 35
37 76 38
37 76 39
37 76 41
37 76 42
37 76 43
37 76 44
37 76 45
37 76 48
37 76 49
Emax
B1
37 71 11
37 71 12
37 71 13
37 71 14
37 71 15
37 71 18
37 71 21
37 71 22
37 71 23
37 71 24
37 71 25
37 71 26
37 71 28
37 71 31
37 71 32
37 71 33
37 71 34
37 71 35
37 71 38
37 71 39
37 71 41
37 71 42
37 71 43
37 71 44
37 71 45
37 71 48
37 71 49
Emax
type 37 .. .8/9
3.38
Dynamic clamps
Selection overview OD 812.8 - OD 863.6
OD 812.8 (ND 800)
permissible load [kN]
d1
type 100 250 350 450 500 510 530 560 580 600C
d1
B1
type 37 .. .1/2/3/4/5/6
Calculation of intermediate values: linear
interpolation.
B1
30
50
60
70
70
70
70
30
50
50
60
60
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
700
715
745
785
785
785
785
790
805
805
830
830
875
790
790
805
830
830
875
875
790
790
805
830
830
875
875
905
925
950
960
985
985
910
885
895
910
930
975
910
885
905
905
945
945
910
920
885
905
905
945
945
920
935
170
185
235
330
345
370
335
145
175
180
240
250
340
145
175
180
230
240
340
400
145
180
180
250
270
400
435
130
136
180
260
260
260
250
110
136
136
180
190
250
110
136
136
180
190
250
290
110
140
140
180
190
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
Emax
B1
725
740
770
810
810
815
810
815
830
830
855
855
900
815
815
830
855
855
900
900
815
815
830
855
855
900
900
955
980
990
1015
1035
1040
965
935
950
965
985
1030
965
935
960
960
1000
1000
965
975
935
960
960
1000
1000
975
990
155
170
215
295
295
305
335
145
180
200
260
240
340
145
180
180
235
235
340
400
145
180
180
250
270
400
435
130
136
180
260
260
260
250
110
136
136
180
190
250
110
136
136
180
190
250
290
110
140
140
180
190
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
37 81 11
37 81 12
37 81 13
37 81 14
37 81 15
37 81 16
37 81 18
37 81 21
37 81 22
37 81 23
37 81 24
37 81 26
37 81 28
37 81 31
37 81 32
37 81 33
37 81 34
37 81 35
37 81 38
37 81 39
37 81 41
37 81 42
37 81 43
37 81 44
37 81 45
37 81 48
37 81 49
76
126
183
284
328
399
545
550
550
59
100
143
215
248
307
413
505
550
550
42
72
108
155
186
233
298
69
96
131
214
271
434
490
541
58
81
110
180
228
365
412
478
54
76
103
169
213
343
54
77
103
169
186
343
385
447
54
76
102
167
183
338
381
441
427
46
74
95
158
170
321
360
400
416
32
51
71
107
134
224
279
32
52
74
110
134
279
351
25
40
58
84
105
217
273
19
30
43
62
77
160
213
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
60
90
135
235
258
286
372
67
101
123
195
261
440
66
98
121
191
234
432
523
66
104
127
193
236
523
612
d1
B1
type 37 .. .8/9
3.39
Emax
37 86 11
37 86 12
37 86 13
37 86 14
37 86 15
37 86 16
37 86 18
37 86 21
37 86 22
37 86 23
37 86 24
37 86 26
37 86 28
37 86 31
37 86 32
37 86 33
37 86 34
37 86 35
37 86 38
37 86 39
37 86 41
37 86 42
37 86 43
37 86 44
37 86 45
37 86 48
37 86 49
79
125
179
277
317
387
518
550
550
61
100
143
216
248
307
415
509
550
550
43
72
109
156
187
233
300
69
96
132
215
273
437
493
545
58
81
111
181
229
367
415
481
55
76
104
170
214
345
55
77
104
170
187
345
388
450
54
76
103
168
184
341
383
444
427
47
74
95
159
170
323
360
403
416
32
51
72
110
135
225
281
32
52
74
111
135
281
353
25
41
58
84
105
219
274
19
31
44
62
78
162
214
30
50
60
70
70
70
70
30
50
50
60
60
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
66
101
145
243
273
304
393
72
113
136
211
286
474
70
109
133
207
255
465
564
70
116
140
207
255
566
659
Dynamic clamps
Selection overview OD 914.4 - OD 965.2
OD 914.4 (ND 900)
B1
75
121
181
285
329
400
544
760
775
805
845
845
845
845
840
855
855
880
880
925
925
850
850
865
880
880
935
935
850
850
865
880
880
935
935
1005
1030
1045
1065
1085
1090
1015
985
1000
1015
1035
1080
1015
1025
985
1010
1010
1050
1050
1015
1025
985
1010
1010
1050
1050
1025
1040
180
185
250
330
365
390
335
145
175
220
240
250
340
400
145
175
180
230
240
340
400
145
180
180
260
320
400
435
130
136
180
260
260
260
250
110
136
136
180
190
250
290
110
136
136
180
190
250
290
110
140
140
180
190
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
550
550
61
100
143
216
248
301
413
511
550
550
43
72
108
156
186
233
299
69
97
132
216
274
438
495
544
58
81
111
181
230
368
416
479
55
77
104
170
215
346
390
54
77
103
170
187
343
387
449
53
76
102
168
185
339
382
443
427
46
74
95
156
170
322
360
402
416
32
51
68
97
135
225
280
32
52
74
111
135
280
353
25
40
58
84
106
219
274
18
30
43
62
78
161
214
30
50
60
70
70
70
70
30
50
50
60
60
70
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
69
100
146
245
275
306
394
72
112
137
213
288
478
574
73
110
134
206
258
475
579
73
117
141
208
264
579
680
d1
B1
type 37 .. .1/2/3/4/5/6
Calculation of intermediate values: linear
interpolation.
B1
75
128
181
277
328
387
518
785
800
830
870
870
870
870
865
880
880
905
905
950
950
875
875
890
905
905
960
960
875
875
890
905
905
960
960
1055
1080
1090
1115
1135
1140
1065
1040
1060
1080
1090
1130
1065
1075
1040
1060
1080
1105
1125
1065
1075
1040
1080
1080
1100
1120
1075
1090
155
180
230
295
290
295
335
145
180
225
250
300
340
400
145
180
225
240
295
340
440
145
180
225
240
295
400
435
130
150
195
260
260
260
250
110
146
186
205
250
250
290
120
146
186
205
250
250
330
120
150
190
205
250
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
550
550
58
103
146
216
249
324
415
513
550
550
550
41
74
111
156
187
234
300
69
100
144
225
295
440
498
512
546
59
84
119
186
247
370
418
431
482
55
79
113
177
232
348
391
51
79
115
170
202
345
403
450
51
78
113
168
199
341
398
445
427
48
76
105
166
185
324
380
403
416
33
52
67
98
140
226
292
33
53
82
115
146
281
354
26
41
64
88
114
220
275
19
31
48
65
84
162
215
30
50
60
70
70
70
70
30
50
50
60
60
70
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
72
112
163
262
296
353
430
81
118
152
231
308
512
603
81
115
151
224
293
510
613
81
124
159
221
288
608
690
d1
37 97 11
37 97 12
37 97 13
37 97 14
37 97 15
37 97 16
37 97 18
37 97 21
37 97 22
37 97 23
37 97 24
37 97 26
37 97 28
37 97 29
37 97 31
37 97 32
37 97 33
37 97 34
37 97 35
37 97 38
37 97 39
37 97 41
37 97 42
37 97 43
37 97 44
37 97 45
37 97 48
37 97 49
Emax
B1
type
37 91 11
37 91 12
37 91 13
37 91 14
37 91 15
37 91 16
37 91 18
37 91 21
37 91 22
37 91 23
37 91 24
37 91 26
37 91 28
37 91 29
37 91 31
37 91 32
37 91 33
37 91 34
37 91 35
37 91 38
37 91 39
37 91 41
37 91 42
37 91 43
37 91 44
37 91 45
37 91 48
37 91 49
Emax
type
type 37 .. .8/9
3.40
Dynamic clamps
Selection overview OD 1016 - OD 1067
OD 1016 (ND 1000)
A
d1
type
B1
type 37 .. .1/2/3/4/5/6
Calculation of intermediate values: linear
interpolation.
Emax
B1
77
120
182
281
323
387
518
30
50
60
70
70
70
70
30
50
50
60
60
70
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
810
825
855
895
895
895
895
890
905
905
930
930
975
975
900
900
915
930
930
985
985
900
900
915
930
930
985
985
1110
1130
1140
1165
1185
1190
1115
1090
1110
1130
1140
1180
1115
1125
1090
1110
1130
1155
1175
1115
1125
1090
1130
1130
1150
1170
1125
1140
165
180
230
295
295
305
335
145
180
225
250
300
340
400
145
180
225
240
295
340
440
145
180
225
240
295
400
435
130
150
195
260
260
270
250
110
146
186
205
250
250
290
120
146
186
205
250
250
330
120
150
190
205
250
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
Emax
B1
76
120
182
281
323
387
518
835
850
880
920
930
930
920
915
930
930
955
955
1000
1000
925
925
940
955
955
1010
1010
925
925
940
955
955
1010
1010
1160
1185
1190
1220
1240
1245
1170
1140
1165
1185
1195
1235
1170
1180
1140
1165
1185
1210
1230
1170
1180
1140
1185
1185
1205
1225
1180
1195
165
180
230
295
295
305
335
145
180
225
250
300
340
400
145
180
225
240
295
340
440
145
180
225
240
290
400
435
130
150
195
260
260
270
250
110
146
186
205
250
250
290
120
146
186
205
250
250
330
120
150
190
205
250
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
550
550
59
102
142
217
250
328
416
515
550
550
550
42
74
111
157
188
237
301
70
100
141
225
290
442
499
514
548
59
84
117
187
240
371
420
433
484
55
79
111
177
228
349
393
52
79
115
171
203
346
405
452
51
78
114
169
200
342
400
447
427
48
76
106
167
185
325
380
405
416
33
52
66
103
137
226
293
33
53
82
116
147
282
356
26
42
64
88
114
220
276
19
31
48
65
84
163
216
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
76
111
166
267
298
359
435
82
117
155
236
324
519
606
81
113
154
226
295
513
620
81
122
159
225
288
614
726
B1
type 37 .. .8/9
3.41
37 T0 11
37 T0 12
37 T0 13
37 T0 14
37 T0 15
37 T0 16
37 T0 18
37 T0 21
37 T0 22
37 T0 23
37 T0 24
37 T0 26
37 T0 28
37 T0 29
37 T0 31
37 T0 32
37 T0 33
37 T0 34
37 T0 35
37 T0 38
37 T0 39
37 T0 41
37 T0 42
37 T0 43
37 T0 44
37 T0 45
37 T0 48
37 T0 49
37 T1 11
37 T1 12
37 T1 13
37 T1 14
37 T1 15
37 T1 16
37 T1 18
37 T1 21
37 T1 22
37 T1 23
37 T1 24
37 T1 26
37 T1 28
37 T1 29
37 T1 31
37 T1 32
37 T1 33
37 T1 34
37 T1 35
37 T1 38
37 T1 39
37 T1 41
37 T1 42
37 T1 43
37 T1 44
37 T1 45
37 T1 48
37 T1 49
550
550
59
100
141
218
254
327
417
516
550
550
42
75
111
157
187
236
302
70
100
144
226
289
443
501
516
550
59
84
119
187
239
373
421
434
485
55
79
113
177
227
350
394
52
80
115
171
203
348
406
454
51
79
114
169
201
343
401
448
427
48
76
105
168
186
326
382
407
416
33
53
66
98
137
227
293
33
53
82
116
147
283
357
26
42
64
89
115
221
277
19
31
48
65
85
163
216
30
50
60
70
70
70
70
30
50
50
60
60
70
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
86
121
179
282
318
362
470
88
127
166
251
342
559
655
88
123
165
243
317
550
664
88
134
170
240
308
659
770
Dynamic clamps
Selection overview OD 1118 - OD 1168
OD 1118 (ND 1100)
B1
77
120
186
281
323
387
518
860
875
905
945
955
955
945
940
955
955
980
980
1025
1025
950
950
965
980
980
1035
1035
950
950
965
980
980
1035
1035
1210
1235
1240
1270
1290
1295
1220
1190
1215
1235
1245
1285
1220
1230
1190
1215
1235
1260
1280
1220
1230
1190
1235
1235
1255
1275
1230
1245
165
180
235
295
295
310
335
145
180
230
250
300
340
400
145
180
225
240
295
340
440
145
180
225
240
295
400
435
130
150
195
260
260
280
250
110
146
190
205
250
250
290
120
146
186
205
250
250
330
120
150
190
205
250
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
550
550
59
100
138
217
254
326
414
518
550
550
42
75
109
158
188
239
303
70
100
148
227
294
445
503
518
550
59
82
121
191
243
374
423
436
487
55
78
114
179
231
351
395
52
80
116
172
204
349
408
456
51
79
114
170
201
344
402
450
427
48
76
106
168
185
327
382
408
416
33
52
67
98
139
228
293
34
54
80
116
148
284
358
26
42
62
89
115
222
278
19
31
47
65
85
164
217
30
50
60
70
70
70
70
30
50
50
60
60
70
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
86
127
180
290
321
403
472
87
126
174
256
347
557
656
86
122
169
247
323
553
668
88
131
169
243
312
664
773
d1
B1
type 37 .. .1/2/3/4/5/6
Calculation of intermediate values: linear
interpolation.
B1
75
120
181
279
323
387
518
885
900
930
970
980
980
970
965
980
980
1005
1005
1050
1050
975
975
990
1005
1005
1060
1060
975
975
990
1005
1005
1060
1060
1260
1285
1295
1320
1340
1345
1270
1240
1265
1285
1295
1335
1270
1280
1240
1265
1285
1310
1330
1270
1280
1240
1285
1285
1305
1325
1280
1295
165
180
235
295
295
310
335
145
180
230
250
300
340
400
145
180
225
240
295
340
440
145
180
225
240
295
400
435
130
150
195
260
260
280
250
110
146
190
205
250
250
290
120
146
186
205
250
250
330
120
150
190
205
250
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
550
550
58
98
139
219
254
326
420
519
550
550
41
75
111
158
188
239
303
70
101
149
227
293
446
504
520
550
59
85
121
189
242
375
424
437
488
56
80
114
179
230
352
397
52
80
116
172
205
350
409
457
51
79
115
170
202
345
404
451
427
48
77
107
169
186
328
383
409
416
33
53
66
98
138
229
293
34
54
80
117
148
285
359
26
42
62
89
115
222
279
19
32
47
66
85
164
218
30
50
60
70
70
70
70
30
50
50
60
60
70
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
93
127
194
295
342
414
495
94
138
186
272
369
563
654
94
133
180
264
342
594
667
94
144
182
260
333
661
831
d1
37 T3 11
37 T3 12
37 T3 13
37 T3 14
37 T3 15
37 T3 16
37 T3 18
37 T3 21
37 T3 22
37 T3 23
37 T3 24
37 T3 26
37 T3 28
37 T3 29
37 T3 31
37 T3 32
37 T3 33
37 T3 34
37 T3 35
37 T3 38
37 T3 39
37 T3 41
37 T3 42
37 T3 43
37 T3 44
37 T3 45
37 T3 48
37 T3 49
Emax
B1
type
37 T2 11
37 T2 12
37 T2 13
37 T2 14
37 T2 15
37 T2 16
37 T2 18
37 T2 21
37 T2 22
37 T2 23
37 T2 24
37 T2 26
37 T2 28
37 T2 29
37 T2 31
37 T2 32
37 T2 33
37 T2 34
37 T2 35
37 T2 38
37 T2 39
37 T2 41
37 T2 42
37 T2 43
37 T2 44
37 T2 45
37 T2 48
37 T2 49
Emax
type
type 37 .. .8/9
3.42
Dynamic clamps
Selection overview OD 1219
OD 1219 (ND 1200)
type
d1
B1
type 37 .. .1/2/3/4/5/6
37 T4 11
37 T4 12
37 T4 13
37 T4 14
37 T4 15
37 T4 16
37 T4 18
37 T4 21
37 T4 22
37 T4 23
37 T4 24
37 T4 26
37 T4 28
37 T4 29
37 T4 31
37 T4 32
37 T4 33
37 T4 34
37 T4 35
37 T4 38
37 T4 39
37 T4 41
37 T4 42
37 T4 43
37 T4 44
37 T4 45
37 T4 48
37 T4 49
Emax
B1
74
122
183
281
323
387
518
910
925
955
995
1005
1005
995
990
1005
1005
1030
1030
1075
1075
1000
1000
1015
1030
1030
1085
1085
1000
1000
1015
1030
1030
1085
1085
1315
1335
1345
1370
1390
1395
1320
1295
1315
1335
1345
1385
1320
1330
1295
1315
1335
1360
1380
1320
1330
1295
1335
1335
1355
1375
1330
1345
165
180
235
295
295
310
335
145
180
230
250
300
340
400
145
180
225
240
295
340
440
145
180
225
240
295
400
435
130
150
195
260
265
280
250
110
146
190
205
250
250
290
120
146
186
205
255
250
330
120
150
190
205
250
290
340
16
16
16
16
21
21
21
16
16
16
21
21
26
26
16
16
16
21
21
26
26
16
16
16
21
21
26
26
550
56
99
137
217
254
322
415
521
550
550
40
75
108
159
189
240
304
67
101
147
228
293
447
505
521
550
55
84
121
189
242
376
425
438
490
52
80
115
179
230
353
398
52
80
116
173
206
350
410
458
51
79
115
171
204
346
405
452
427
49
77
107
169
188
329
385
410
416
31
52
66
98
139
229
293
34
54
78
117
148
286
361
26
42
60
89
116
223
280
19
32
45
66
85
165
218
max wt.
load gr. [kg]
6
7
8
9
9
9
9
6
7
7
8
8
9
9
6
6
7
8
8
9
9
6
6
7
8
8
9
9
d1
The connection load group is to be specified when ordering. On selection of a smaller load group than that
shown in the table, the E dimensions of the clamp are reduced (see table on p. 3.15). Fit: H7 f8.
type 37 .. .8/9
3.43
30
50
60
70
70
70
70
30
50
50
60
60
70
70
30
30
50
60
60
70
70
30
30
50
60
60
70
70
93
136
195
310
362
415
530
94
139
186
275
373
607
708
92
134
183
267
364
596
718
94
142
183
263
337
712
831
Shear lugs
Type 3L
Fx
Fcontor.
Selection
OD
Fpipe
Ffriction
Ffriction = Fpipe
= 0.1...0.4 (friction figure)
catalog dimensions
B1 plus 2mm
Fx E = (Fcontor. + Ffriction) OD
2
N
2xN
0 2mm
The shear lugs secure the position of the dynamic clamps in the expected direction of force
and are practically unstressed. Even in a load
case, friction forces from the pipe-clamp-contact ensure firm positioning. Lateral forces are
negligable.
1
2
3
4
5
6
material
S235JR
S355J2
16Mo3
13CrMo4-5
10CrMo9-10
X10CrMoVNb9-1
Order details:
shear lug
type 3L .. .. - ..
Order example
For shear lug on a pipe clamp type 36 22 31
for a pipe made from material 13CrMo4-5:
Order number 3L 22 31-04
3.44
type 36
type 30
sight glass
3 Installation
travel indicator
type 35
name plate
piston rod casing
connecting lug
2 Delivery condition
The shock absorbers are supplied as fully
operational components including hydraulic
fluid. On type 30 the connecting lugs are
bolted on one side to the base of the shock
absorber and on the other to the piston rod
and secured with locking bolts.
LISEGA shock absorbers are manufactured entirely of non-rusting materials. They therefore
require no additional surface treatment. The
threaded connecting lugs are galvanized and
white chromatized.
Weld-on brackets type 35 are supplied separately
with the appropriate bolts. The surface protection
hereby consists of a weldable primer.
For shipment the type 30 shock absorbers are
packed singly with retracted pistons in suitable
crates.
3.45
type designation
nominal load
theoretical travel
description of hydraulic fluid
serial number
order number
marking and ident. number, if required
name plate
travel indicator
connection lug
max.
90
travel reserve
for piston end
Type 30
travel reserve
for piston end
working range
3.46
Under normal operating conditions the service life of the snubbers is designed to match
the maximum operational life (60 years) of a
plant. The seals and hydraulic fluid should be
exchanged at least once during this period, at
the latest after 23 years.
Under certain conditions of use (extreme loading), premature aging or increased mechanical
wear cannot be excluded. In accordance with
the stringent demands concerning reliability,
preventive maintenance is recommended.
The performance of maintenance work is the
responsibility of the plant operator.
Measures
1. Regular inspection
Visual inspection once a year
2. Extended testing
Function test, at the latest after
12 years of operation
Implementation
The inspection and maintenance work must be
carried out by specially trained personnel.
3.47
3
Securing pipe systems with
snubbers type 30
2 Extended inspection
A supplementary inspection is carried out after
an operational period of 12 years in which a
small selection of the snubbers installed (min.
2 units per type) are subjected to an additional
function test.
3.48
1 Delivery condition
Welding procedure
2 Installation
The connection components and connecting
brackets on site must be fully welded.
type
35
35
35
35
35
35
35
35
35
35
35
19
29
39
49
59
69
79
89
99
09
20
13
13
13
13
19
19
19
19
11
13
19
3.0
3.0
3.0
4.0
7.0
9.5
13.5
18.0
20.0
17.0
3.0
3.0
3.0
5.0
8.0
11.0
15.5
21.0
23.0
19.0
=
in mm
3.49
Schweifolge Type 35
3 Surface protection
After completion of the attachment, the primer
surface of the weld-on brackets can be painted.
It is urgently advised to do this before installation of the snubber.
3 Installation
lower connection plate
casing
position indicator
transport bracket
upper connection plate
connection thread
thread
size
M
M
M
M
M
M
12
16
20
24
30
36
screw torque
values * [Nm]
4.6
5.6
29
71
138
235
475
1080
39
95
184
315
635
1440
type
serial and commission number
nominal load
operating temperature
ident. number
3D 10 44-D
13-GF-12
10kN
1310741
40C
LAB15BQ020
Name plate type 3D
3.50
2 Delivery condition
LISEGA dynamic clamps are supplied with all
the necessary boltings for installation. For reasons of dispatch optimization the clamps may
be delivered partially assembled.
Shear lugs
In order to avoid any kind of twist of the clamp
it is recommended that shear lugs be fitted.
See also p. 3.44 on this.
Type 37 .. .1/2/3/4/5/6
3 Installation
Type 36
This design consists of a massive upper section with integrated connecting bracket and,
depending on the load range, with one or two
U-bolts and a shim plate.
Type 36 .. .4/5
Type 37 .. .7/8/9
3.51
4
PRODUCT
GROUP
Page
4
0
1
2
3
PRODUCT
GROUP
5
6
7
8
9
4.0
Product group 4
Field of application
In high temperature pipe
systems, pipe clamps and
clamp bases are the most
highly stressed and hence
the most vulnerable components in the support
chain due to the effects of
such high temperatures.
However, pipe clamps
are seldom checked, as
access is difficult after
commissioning due to the
surrounding insulation.
Standardization
Pipe clamps, clamp bases, pipe weld-on lugs
and U-bolts all fall into the category of pipe
connections. For these products, the design
criteria of the pipe systems lead to wide variations, and so to a particularly large number
of components. The dynamic clamps of product
group 3 also belong in principle to this group.
The design of both horizontal and vertical
piping is determined by:
diameters
loads
temperature of the medium
insulation thicknesses
4.1
4
Quality
4.2
Product description
Horizontal clamps Type 41, 42, 43, 44
1 Weld-on lug type 41
Type 41
Type 42 .. 17
Type
44 .. .1
.2
.3
This type is mainly used as a pipe connection A rigid yoke takes up the load from a pipefor pipe systems under 80C on horizontal
surrounding U-bolt with a shim plate. From
pipes or pipe elbows.
certain diameters, temperatures or load ranges,
a flat steel strap is used instead of a round
steel U-bolt.
2.1 Horizontal clamp type 42 .. 17
This clamp can be used as a construction
Completely eliminating welds, the individual
clamp or hanger clamp in cold piping syscomponents are formfitted with plug connectems. The field of application is limited to
tions and bolted to each other (Patent No.
smaller pipe dimensions.
DE 3817059).
Type
44 .. .4
.5
.6
.7
.8
.9
Type 44 .. 51
.2
.3
.4
.5
.6
.7
Pipe clamp type 43
weight 27kg
U-bolt type 44
weight 14kg
4.3
Product description
Riser clamps Type 45, 46, 48
1 Riser clamp type 45
S235JR
horizontal clamps
type 41
type 42
type 43
type 44
riser clamps
type 45
type 46
type 48
clamp bases
type 49 .. .1
type 49 .. .2
type 49 .. .3
type 49 .. .4
type 49 .. .5
S355J2
16Mo3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
pipe diameter
x
OD 100
OD 100 OD 400
OD 400
N-Dim.
OD + 12mm
OD + 22mm
OD + 32mm
4.4
Product description
Clamp base Type 49
Clamp bases are generally used as slide
bearings (loose supports) for horizontally
arranged pipe systems.
As with pipe clamps, the application spectrum covers a diameter range from OD 21.3
to OD 1219 and a temperature range up to
600C; for OD up to 88.9: 650C.
Different applications, according to temperature and loads, require different clamp base
designs.
If required, components with special dimensions can be supplied. A small selection is
shown on p. 4.9 in the section Special designs.
material
Steel / steel
~0.3
Steel / PTFE
~0.1
~0.25
Clamp base heights dependent on temperature of the medium and on pipe diameter
4.5
50
100
150
200
Pipe
21.388.9
21.3558.8
1081219
323.91219
100
150
200
250
300
Pipe
21.326.9
33.776.1
88.9193.7
219.1457.2
5081219
150
200
250
300
Pipe
21.376.1
88.9168.3
193.7323.9
355.61219
150 (200)
200 (250)
250
300
Pipe
21.376.1
88.9168.3
193.7323.9
355.61219
3 Special designs
Version 1:
Clamp base for low pipe
temperatures
type 49 .. .1, 49 .. .2
Version 2:
Clamp base for medium
and high temperatures
type 49 .. .3, .4, .. .5
These clamp bases can be used in a variety of ways. By using two lower sections
set against each other, a double guide can
be easily produced (Fig. 2). By additionally
fitting lateral guides, guidance from all sides
can be provided.
Examples of use:
(Fig. 1)
Clamp base type 49 with lift-off
restraint. Permissible loads and
dimensions, see p. 4.68
(Fig. 2)
Clamp base type 49 .. .. GP
as double guide
4.6
3 Lift-off restraints
type 49 00 01 to 49 00 05
Lift-off restraint
4.7
4
Connection plates type 77
on pipe clamps type 43/44
Type 49 .. .. -G2P
Type 49 .. .. -G2A
Pipe bearing (type 49 .. .. -G2P)
type
42
42
42
42
42
42
42
00
00
00
00
00
00
00
04
05
06
07
08
09
10
width [mm]
b=40
b=50
b=60
b=70
b=80
b=90
b=100
type
42
42
42
42
42
42
00
00
00
00
00
00
11
12
15
17
20
22
width [mm]
b=110
b=120
b=150
b=170
b=200
b=220
Type 49 .. .. -G3
Type 49 .. .. -G4
4.8
Special designs
For pipe supports, the
application of standardized
components has long since
proven itself through
enormous savings in time
and costs where design,
shipment and installation
are concerned. This applies particularly to pipe
clamps and clamp bases.
However, the general complexity of pipe systems requires an extremely wide
range of applications for
these components, which
in special cases demands
the use of special designs.
For the technically correct
solution it is necessary
in such cases to rely on
experienced professionals, who can offer triedand-tested solutions and
calculation processes.
Special designs
The standardized LISEGA program of pipesurrounding support components is comprehensive and covers all general cases of
applications, going well beyond the usual
spectrum in this field. In spite of this, more
complicated cases sometimes occur where
only a special design can provide the best
solution. Among other things, special designs
are most often called for in the following
situations:
4.9
4.10
Selection table
OD 21.3
Pipe clamps, clamp bases, OD 21.3 (ND 15), type 42, 43, 45, 49
d4
type
100
42 01 17
2.5
type
100
250
350
560
d4
wt.
[kg]
load
group
10.5
22
43
26
0.14
C-D
d2
wt.
[kg]
load
group
M10
28
30
0.3
C-2
600C
d1
wt.
[kg]
load
group
1.5
12
12
12
100
135
135
30
30
30
0.5
0.6
0.6
C-2
C-2
C-2
580 600C
E
A
d2
E
E
L
d1
4.11
350
560
580
600C
42 01 19 5.3
4.0
2.9
Heat-resistant materials, see pp. 0.9 and 4.4
d1
250
type
100
250
350
43 01 19
43 01 39
43 01 49
6.1
4.7
3.4
5.8
type
100
250
350
45 01 11
45 01 11
45 01 11
45 01 11
45 01 11
45 01 31
45 01 31
45 01 31
45 01 31
45 01 41
45 01 41
45 01 41
45 01 41
4.4
3.7
2.7
2.1
1.9
9.0
6.6
5.2
4.3
8.7
6.4
5.0
4.2
3.6
2.9
2.2
1.7
1.4
7.6
5.6
4.4
3.7
7.8
5.8
4.5
3.7
2.5
2.1
1.5
1.2
1.0
6.5
4.8
3.8
3.1
7.3
5.4
4.2
3.5
5.6
4.1
3.3
2.7
6.4
4.7
3.7
3.0
type
100
250
350
49 01 11
49 01 12
49 01 25
49 01 35
49 01 45
1.1
1.6
3.7
4.2
5.4
0.8
1.2
2.8
3.8
4.6
0.6
0.9
2.4
3.2
4.4
5.2
4.3
6.7
3.6
5.9
2.3
4.5
1.9
2.8
3.9
4.9
3.6
2.8
2.3
4.9
3.6
2.8
2.3
1.8
2.6
3.7
4.0
3.0
2.3
1.9
4.3
3.2
2.5
2.0
2.6
3.6
560
2.6
1.9
1.5
1.2
3.2
2.4
1.9
1.5
2.5
3.4
580
1.2
2.8
560
2.1
wt. load
[kg] group
580 600C
d1
1.3
1.0
0.8
0.6
2.0
1.5
1.2
1.0
1.5
1.1
0.8
0.7
12
12
12
12
12
12
12
12
12
12
12
12
12
25
25
25
25
25
25
25
25
25
25
25
25
25
50
50
50
50
50
70
70
70
70
70
70
70
70
250
300
400
500
600
300
400
500
600
300
400
500
600
2.2
2.5
3.2
3.8
4.4
4.2
5.3
6.4
7.5
4.2
5.3
6.4
7.5
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
560
580 600C
wt.
[kg]
61
111
111
161
161
100
150
175
175
175
40
65
70 230
100 230
100 230
50
100
100
150
150
0.6
1.3
1.6
2.3
2.7
1.7
2.3
1.7
1.1
0.8
0.6
0.5
1.3
Selection table
OD 26.9
Pipe clamps, clamp bases, OD 26.9 (ND 20), type 42, 43, 45, 49
100
42 02 17
2.5
type
100
250
350
560
d4
wt.
[kg]
load
group
10.5
25
48
26
0.15
C-D
d2
wt.
[kg]
load
group
M10
33
30
0.3
C-2
600C
d1
wt.
[kg]
load
group
1.5
12
12
12
110
135
135
30
30
30
0.5
0.6
0.6
C-2
C-2
C-2
580 600C
d4
E
A
type
250
350
43 02 19
43 02 39
43 02 49
6.1
4.7
3.4
5.8
type
100
250
350
45 02 11
45 02 11
45 02 11
45 02 11
45 02 11
45 02 31
45 02 31
45 02 31
45 02 31
45 02 41
45 02 41
45 02 41
45 02 41
4.6
3.7
2.7
2.2
1.8
9.3
6.8
5.3
4.4
8.9
6.5
5.1
4.2
3.7
3.0
2.2
1.7
1.4
7.8
5.7
4.5
3.7
8.1
5.9
4.6
3.8
2.6
2.1
1.6
1.2
1.0
6.7
4.9
3.8
3.2
7.5
5.5
4.3
3.5
5.8
4.2
3.3
2.7
6.5
4.8
3.7
3.1
type
100
250
350
49 02 11
49 02 12
49 02 25
49 02 35
49 02 45
1.1
1.6
3.7
4.3
5.4
0.8
1.2
2.8
3.8
4.6
0.6
0.9
2.4
3.3
4.4
5.2
4.3
6.7
3.6
5.9
2.3
4.5
1.9
2.8
4.0
5.0
3.7
2.9
2.4
5.0
3.7
2.9
2.4
1.8
2.7
3.7
4.1
3.0
2.4
2.0
4.4
3.2
2.5
2.1
2.6
3.7
560
2.7
2.0
1.5
1.2
3.3
2.4
1.9
1.6
2.6
3.4
580
1.2
2.8
560
2.1
d1
1.4
1.0
0.8
0.6
2.1
1.5
1.2
1.0
1.5
1.1
0.9
0.7
12
12
12
12
12
12
12
12
12
12
12
12
12
25
25
25
25
25
25
25
25
25
25
25
25
25
50
50
50
50
50
70
70
70
70
70
70
70
70
250
300
400
500
600
300
400
500
600
300
400
500
600
2.2
2.5
3.2
3.8
4.4
4.2
5.3
6.4
7.5
4.2
5.3
6.4
7.5
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
560
580 600C
wt.
[kg]
63
113
113
163
163
100
150
175
175
175
40
65
70
100
100
230
230
230
50
100
100
150
150
0.6
1.4
1.6
2.3
2.7
1.7
2.3
1.8
1.3
d2
wt. load
[kg] group
580 600C
1.1
0.8
0.6
0.5
L
d1
E
100
type
42 02 19 5.3
4.0
2.9
Heat-resistant materials, see pp. 0.9 and 4.4
d1
600C
580
560
350
250
4.12
Selection table
OD 33.7
Pipe clamps, clamp bases, OD 33.7 (ND 25), type 42, 43, 45, 49
d4
type
100
42 03 17
2.5
type
100
250
350
560
580 600C
d4
wt.
[kg]
load
group
10.5
32
54
26
0.16
C-D
E
A
d2
350
560
580
d2
wt.
[kg]
load
group
M10
36
30
0.4
C-2
600C
d1
wt.
[kg]
load
group
1.8
12
12
12
120
165
165
30
30
40
0.6
0.8
1.1
C-2
C-2
C-2
600C
42 03 19 5.3
4.0
2.9
Heat-resistant materials, see pp. 0.9 and 4.4
type
100
250
350
43 03 19
43 03 39
43 03 49
6.1
4.7
6.5
3.4
5.8
type
100
250
350
45 03 11
45 03 11
45 03 11
45 03 11
45 03 11
45 03 31
45 03 32
45 03 31
45 03 32
45 03 31
45 03 32
45 03 31
45 03 32
45 03 41
45 03 42
45 03 41
45 03 42
45 03 41
45 03 42
45 03 41
45 03 42
5.8
4.7
3.4
2.6
2.2
9.6
10
6.9
10
5.4
10
4.5
10
9.3
4.6
3.8
2.7
2.2
1.8
8.1
10
5.9
10
4.6
10
3.8
10
8.3
3.3
2.7
2.0
1.5
1.3
6.9
9.8
5.0
9.8
3.9
9.8
3.2
9.8
7.8
6.0
9.3
4.3
9.3
3.4
9.3
2.8
9.3
6.8
5.2
9.0
3.7
9.0
2.9
9.0
2.4
9.0
5.2
4.3
9.0
3.1
9.0
2.4
9.0
2.0
9.0
4.6
6.7
6.0
5.6
4.9
3.8
3.3
5.2
4.7
4.4
3.8
3.0
4.3
3.9
3.6
3.1
2.4
2.6
9.0
2.1
9.0
type
100
250
350
49 03 11
49 03 12
49 03 25
49 03 35
49 03 45
1.1
1.6
3.3
4.6
5.4
0.8
1.2
2.8
4.1
4.6
0.6
0.9
2.4
3.5
4.4
5.2
6.7
4.3
6.7
3.6
6.7
560
2.3
5.3
580
1.2
3.4
2.5
d1
250
d1
2.8
8.9
2.0
8.9
1.6
8.2
1.3
6.8
3.5
8.9
2.5
8.9
1.9
8.9
1.6
8.4
560
wt. load
[kg] group
580 600C
d1
1.4
7.3
1.0
5.3
0.8
4.2
0.6
3.5
2.2
8.7
1.6
8.1
1.2
6.4
1.0
5.3
1.6
8.2
1.1
6.0
0.9
4.7
0.7
3.9
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
60
60
60
60
60
70
90
70
90
70
90
70
90
70
90
70
90
70
90
70
90
250
300
400
500
600
300
300
400
400
500
500
600
600
300
300
400
400
500
500
600
600
2.7
3.0
3.8
4.5
5.3
4.2
10.2
5.3
13.0
6.4
15.8
7.5
18.7
4.2
10.2
5.3
13.0
6.4
15.8
7.5
18.7
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
560
580 600C
wt.
[kg]
67
117
167
167
167
100
150
175
175
175
45
70
102
102
102
230
230
230
50
100
150
150
150
0.7
1.5
2.3
2.4
2.8
1.2
6.1
0.8
4.5
0.6
3.5
0.5
2.9
4.13
1.9
3.0
4.0
1.8
2.8
3.7
2.8
3.7
2.7
3.4
1.9
2.3
1.8
1.3
Selection table
OD 42.4
Pipe clamps, clamp bases, OD 42.4 (ND 32), type 42, 43, 45, 49
100
42 04 17
2.5
type
100
250
350
560
580 600C
d4
wt.
[kg]
load
group
10.5
45
66
26
0.19
C-D
d4
E
A
type
560
580
d2
wt.
[kg]
load
group
M10
40
30
0.4
C-2
600C
d1
wt.
[kg]
load
group
1.8
12
12
12
135
180
180
30
30
40
0.7
0.9
1.2
C-2
C-2
C-2
600C
100
250
350
43 04 19
43 04 39
43 04 49
6.1
6.7
4.7
6.5
3.4
5.8
6.7
4.3
6.7
3.6
6.7
560
2.3
5.3
580
1.2
3.4
2.5
type
42 04 19 5.3
4.0
2.9
Heat-resistant materials, see pp. 0.9 and 4.4
d2
350
d1
250
350
45 04 11
45 04 11
45 04 11
45 04 11
45 04 39
45 04 31
45 04 32
45 04 39
45 04 31
45 04 32
45 04 39
45 04 31
45 04 32
45 04 39
45 04 31
45 04 32
45 04 41
45 04 42
45 04 41
45 04 42
45 04 41
45 04 42
45 04 41
45 04 42
9.0
6.5
5.1
4.1
7.2
5.2
4.0
3.3
5.1
3.7
2.9
2.4
18
24
15
24
13
23
11
22
10
22
14
24
12
24
10
23
8.8
21
7.6
19
11
24
9.6
23
8.2
20
7.1
17
9.5
23
8.0
19
6.9
17
5.9
14
6.1
15
5.0
5.1
13
9.9
22
7.7
19
6.2
15
5.2
13
9.9
24
8.3
20
10
22
8.0
19
6.7
16
5.0
5.5
13
4.1
4.1
10
3.3
3.3
8.5
2.8
2.8
7.1
6.8
17
5.1
13
4.1
10
3.4
8.8
2.8
2.8
7.1
2.1
2.1
5.4
1.7
1.7
4.3
1.4
1.4
3.6
4.3
10
3.2
8.3
2.6
6.6
2.2
5.5
580 600C
d1
3.2
8.1
2.4
6.1
1.9
4.9
1.6
4.1
12
12
12
12
12
16
16
12
16
16
12
16
16
12
16
16
12
16
12
16
12
16
12
16
25
25
25
25
25
30
30
25
30
30
25
30
30
25
30
30
25
30
25
30
25
30
25
30
70
70
70
70
70
70
100
70
70
100
70
70
100
70
70
100
70
100
70
100
70
100
70
100
300
400
500
600
350
350
350
450
450
450
550
550
550
650
650
650
350
350
450
450
550
550
650
650
2.4
6.0
1.8
4.6
1.4
3.7
1.2
3.1
wt. load
[kg] group
4.3
5.4
6.5
7.6
7.2
7.2
13.4
8.9
8.9
16.5
10.5
10.5
19.7
12.2
12.2
22.8
7.0
13.4
8.6
16.5
10.3
19.7
11.9
22.8
C-4
C-4
C-4
C-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
L
d1
10
24
9.1
22
10
23
9.2
22
7.7
19
8.4
21
5.0
6.3
16
5.0
5.1
13
4.3
4.3
10
9.0
22
6.8
17
5.4
13
4.5
11
560
250
100
type
type
100
250
350
49 04 11
49 04 12
49 04 25
49 04 35
49 04 45
1.1
1.6
3.4
4.7
5.5
0.8
1.2
2.9
4.2
4.7
0.6
0.9
2.4
3.6
4.5
2.0
3.1
4.0
1.8
2.9
3.8
2.9
3.7
2.8
3.5
560
1.9
2.4
580 600C
1.8
1.3
wt.
[kg]
71
121
171
171
171
100
150
175
175
175
45
70
102
102
102
230
230
230
50
100
150
150
150
0.7
1.6
2.4
2.4
2.9
4.14
Selection table
OD 48.3
Pipe clamps, clamp bases, OD 48.3 (ND 40), type 42, 43, 45, 49
d4
type
100
42 05 17
2.5
type
100
250
350
560
580 600C
d4
wt.
[kg]
load
group
10.5
54
77
26
0.25
C-D
E
A
d2
350
560
580
d2
wt.
[kg]
load
group
M10
45
30
0.4
C-2
600C
d1
wt.
[kg]
load
group
1.8
12
12
12
140
185
185
30
30
40
0.7
0.9
1.2
C-2
C-2
C-2
600C
42 05 19 5.3
4.0
2.9
Heat-resistant materials, see pp. 0.9 and 4.4
type
100
250
350
43 05 19
43 05 39
43 05 49
6.1
6.7
4.7
6.5
6.7
3.4
5.6
6.7
4.8
6.7
4.3
6.7
3.6
6.7
560
1.2
3.4
2.3
5.3
580
2.5
d1
250
d1
100
250
350
45 05 11
45 05 11
45 05 11
45 05 11
45 05 39
45 05 31
45 05 32
45 05 39
45 05 31
45 05 32
45 05 39
45 05 31
45 05 32
45 05 39
45 05 31
45 05 32
45 05 41
45 05 42
45 05 41
45 05 42
45 05 41
45 05 42
45 05 41
45 05 42
10
7.7
5.9
4.9
8.1
5.9
4.6
3.7
5.8
4.2
3.3
2.7
22
24
18
24
16
23
13
22
12
22
16
24
14
24
12
23
10
22
9.0
22
13
24
11
24
9.6
23
8.3
21
11
24
9.3
24
8.0
20
6.9
17
7.2
19
5.0
6.0
16
10
type
49 05 11
49 05 12
49 05 25
49 05 35
49 05 45
10
11
9.1
22
7.2
19
6.0
16
9.9
22
5.0
7.5
19
5.0
6.0
16
4.9
4.9
13
9.8
22
8.0
21
6.4
17
5.3
14
5.0
6.5
17
4.9
4.9
13
3.9
3.9
10
3.2
3.2
8.7
8.0
21
6.0
16
4.8
12
4.0
10
9.6
24
10
23
8.9
23
9.4
22
7.8
20
100
250
350
1.1
1.6
3.4
4.7
5.6
0.8
1.2
2.9
4.2
4.8
0.6
0.9
2.4
3.6
4.5
560
wt. load
[kg] group
580 600C
d1
3.3
3.3
8.9
2.5
2.5
6.7
2.0
2.0
5.3
1.6
1.6
4.4
5.0
13
3.8
10
3.0
8.2
2.5
6.8
3.7
10
2.8
7.5
2.2
6.0
1.8
5.0
12
12
12
12
12
16
16
12
16
16
12
16
16
12
16
16
12
16
12
16
12
16
12
16
25
25
25
25
25
30
30
25
30
30
25
30
30
25
30
30
25
30
25
30
25
30
25
30
80
80
80
80
80
80
120
80
80
120
80
80
120
80
80
120
80
120
80
120
80
120
80
120
300
400
500
600
350
350
350
450
450
450
550
550
550
650
650
650
350
350
450
450
550
550
650
650
4.9
6.2
7.4
8.7
8.3
8.3
16.1
10.1
10.1
19.9
12.0
12.0
23.6
13.9
13.9
27.4
8.0
16.1
9.9
19.9
11.7
23.6
13.6
27.4
C-4
C-4
C-4
C-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
560
580 600C
wt.
[kg]
74
124
174
174
174
100
150
175
175
175
50
75
102
102
102
230
230
230
50
100
150
150
150
0.8
1.7
2.4
2.5
2.9
2.8
7.5
2.1
5.6
1.7
4.5
1.4
3.7
type
4.15
2.0
3.1
4.0
1.8
2.9
3.8
2.9
3.7
2.8
3.5
1.9
2.4
1.8
1.3
Selection table
OD 60.3
Pipe clamps, clamp bases, OD 60.3 (ND 50), type 42, 43, 45, 49
100
42 06 17
2.5
type
100
250
350
560
580 600C
d4
wt.
[kg]
load
group
10.5
75
94
26
0.27
C-D
d4
E
A
type
350
560
580
d2
wt.
[kg]
load
group
M12
55
40
0.8
C-2
600C
d1
wt.
[kg]
load
group
2.5
12
12
12
155
200
200
40
50
50
1.2
1.6
2.1
C-4
C-4
C-4
600C
42 06 19 6.7
5.5
4.0
Heat-resistant materials, see pp. 0.9 and 4.4
d2
250
100
250
350
43 06 19
43 06 39
43 06 49
7.5
9.2
5.7
8.6
4.1
8.2
6.3
5.2
6.0
560
3.4
6.0
580
1.8
4.7
3.4
9.0
24
6.5
17
5.1
13
4.1
11
6.7
18
4.8
13
3.8
10
3.1
8.5
4.8
13
3.4
9.4
2.7
7.4
2.2
6.1
24
24
20
24
17
23
15
22
13
22
11
22
18
24
16
24
13
23
11
22
10
22
15
24
13
24
11
23
9.6
20
8.4
18
12
24
11
22
9.4
19
8.1
17
7.1
15
8.6
18
5.0
7.0
15
5.0
5.9
12
9.8
22
9.2
19
7.5
16
6.3
13
24
11
23
10
23
10
21
10
22
9.2
19
9.9
22
8.5
18
7.1
15
5.0
7.4
15
5.0
5.6
12
4.5
4.5
9.8
3.8
3.8
8.2
9.1
19
7.0
14
5.6
12
4.7
10
560
3.7
3.7
8.0
2.9
2.9
6.2
2.3
2.3
5.0
1.9
1.9
4.2
5.7
12
4.4
9.4
3.5
7.6
3.0
6.4
580 600C
d1
4.2
9.0
3.2
7.0
2.6
5.6
2.2
4.7
12
16
12
16
12
16
12
16
12
16
16
12
16
16
12
16
16
12
16
16
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
25
30
30
25
30
30
25
30
30
25
30
30
25
30
25
30
25
30
25
30
70
80
70
80
70
80
70
80
100
100
120
100
100
120
100
100
120
100
100
120
100
120
100
120
100
120
100
120
300
300
400
400
500
500
600
600
400
400
400
500
500
500
600
600
600
700
700
700
400
400
500
500
600
600
700
700
3.2
6.7
2.4
5.2
2.0
4.2
1.6
3.5
wt. load
[kg] group
4.4
7.4
5.5
9.3
6.6
11.2
7.7
13.1
11.6
11.6
18.1
13.9
13.9
21.9
16.3
16.3
25.7
18.6
18.6
29.4
11.2
18.1
13.6
21.9
15.9
25.7
18.3
29.4
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
L
d1
E
45 06 11
45 06 12
45 06 11
45 06 12
45 06 11
45 06 12
45 06 11
45 06 12
45 06 39
45 06 31
45 06 32
45 06 39
45 06 31
45 06 32
45 06 39
45 06 31
45 06 32
45 06 39
45 06 31
45 06 32
45 06 41
45 06 42
45 06 41
45 06 42
45 06 41
45 06 42
45 06 41
45 06 42
350
250
100
type
d1
type
type
100
250
350
49 06 11
49 06 12
49 06 25
49 06 35
49 06 45
1.2
1.7
4.0
4.7
7.0
0.9
1.3
3.4
4.2
6.0
0.7
0.9
2.8
3.6
5.7
2.3
3.1
5.1
2.1
2.9
4.8
2.9
4.7
2.8
4.4
560
1.9
3.0
580 600C
2.3
1.6
wt.
[kg]
80
130
180
180
180
150
200
220
220
220
50
75
110
110
110
285
285
290
50
100
150
150
150
1.3
2.4
3.5
3.6
4.2
4.16
Selection table
OD 73
Pipe clamps, clamp bases, OD 73 (ND 65), type 42, 43, 45, 46, 48, 49
d4
type
100
250
350
560
580 600C
wt.
[kg]
load
group
13
95
120
32
0.52
C-2
wt.
E
A
42 07 17 5.0
d4
d2
type
250
350
560
580
d2
[kg]
load
group
M12
60
40
0.8
C-2
wt.
600C
d1
[kg]
load
group
2.5
12
12
12
165
215
215
40
50
50
1.2
1.8
2.3
C-4
C-4
C-4
wt.
600C
42 07 19 6.7
5.5
4.0
Heat-resistant materials, see pp. 0.9 and 4.4
d1
100
d1
type 46
L
EK
d3
type
100
250
350
43 07 19
43 07 39
43 07 49
7.5
9.2
5.7
8.6
4.1
8.2
type
100
250
17
27
13
23
14
22
10
16
11
17
8.3
12
5.0
6.6
10
45 07 19
45 07 11
45 07 12
45 07 19
45 07 11
45 07 12
45 07 19
45 07 11
45 07 12
45 07 19
45 07 11
45 07 12
9.0
13
350
6.3
6.1
5.2
6.0
560
3.4
6.0
580
1.8
4.7
560
3.4
580 600C
5.0
9.2
16
5.0
7.5
11
5.0
6.0
9.1
4.7
4.7
7.3
d1
[kg]
load
group
12
16
16
12
16
16
12
16
16
12
16
16
25
30
30
25
30
30
25
30
30
25
30
30
70
70
100
70
70
100
70
70
100
70
70
100
300
300
300
400
400
400
500
500
500
600
600
600
6.6
6.6
9.3
8.2
8.2
11.7
9.9
9.9
14.0
11.5
11.5
16.4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
type 48
L
ER
d3
36
type
4. 07 31 19
4. 07 32 22
4. 07 33 46
4. 07 41
4. 07 42
4. 07 43
18
21
45
18
21
44
16
20
41
11
15
28
10 8.0 5.0
13 10 6.6
25 20 12
7.3 5.3 3.9
11 8.1 5.9
25 24 18 13 10
21
21
25
21
21
25
350
350
350
350
350
350
750
750
750
750
750
750
15
25
30
15
25
30
8.0
8.0
12
7.0
9.0
12
15 70
17 75
27 100
15 70
19 85
27 115
7.0
7.0
11
6.0
7.0
9.0
14
16
23
14
17
24
C-4
C-4
3-5
C-4
C-4
3-5
type
4.17
100
250
350
49 07 11 1.2
49 07 12 1.7
49 07 25 4.0
49 07 35 7.0
49 07 45 10.1
0.9
1.3
3.4
6.3
8.6
0.7
0.9
2.8
5.5
8.2
2.3
4.6
7.4
2.1
4.3
6.8
4.3
6.8
4.2
5.8
wt.
560
2.6
3.8
580 600C
2.8
2.0
[kg]
87
137
187
187
187
150
200
220
220
220
55
80
110
110
110
285
285
290
50
100
150
150
150
1.5
2.6
3.7
3.8
4.3
Selection table
OD 76.1
Pipe clamps, clamp bases, OD 76.1 (ND 65), type 42, 43, 45, 46, 48, 49
100
42 08 17
5.0
type
100
250
350
wt.
560
580 600C
d4
[kg]
load
group
13
95
120
32
0.54
C-2
wt.
d4
E
A
type
560
580
d2
[kg]
load
group
M12
60
40
0.9
C-2
wt.
600C
d1
[kg]
load
group
2.5
12
12
12
165
215
215
40
50
50
1.2
1.8
2.3
C-4
C-4
C-4
wt.
600C
350
43 08 19
43 08 39
43 08 49
7.5
9.2
5.7
8.6
4.1
8.2
type
100
45 08 19
45 08 11
45 08 12
45 08 19
45 08 11
45 08 12
45 08 19
45 08 11
45 08 12
45 08 19
45 08 11
45 08 12
250
17
27
13
23
14
22
10
16
11
17
8.3
12
5.0
6.6
10
9.0
13
350
6.3
6.1
5.2
6.0
560
3.4
6.0
580
1.8
4.7
560
3.4
580 600C
5.0
9.2
16
5.0
7.5
11
5.0
6.0
9.1
4.7
4.7
7.3
d1
[kg]
load
group
12
16
16
12
16
16
12
16
16
12
16
16
25
30
30
25
30
30
25
30
30
25
30
30
70
70
100
70
70
100
70
70
100
70
70
100
300
300
300
400
400
400
500
500
500
600
600
600
6.6
6.6
9.4
8.3
8.3
11.7
9.9
9.9
14.1
11.6
11.6
16.4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
L
d1
E
250
100
type 46
L
d3
EK
type
42 08 19 6.7
5.5
4.0
Heat-resistant materials, see pp. 0.9 and 4.4
d2
d1
350
250
type 48
4. 08 31 19
4. 08 32 23
4. 08 33 47
4. 08 41
4. 08 42
4. 08 43
18
22
45
18
21
44
16
20
41
11
15
28
10 8.0 5.0
13 10 6.7
25 20 12
7.3 5.3 3.9
11 8.1 5.9
25 24 18 13 10
21
21
25
21
21
25
350
350
350
350
350
350
750
750
750
750
750
750
15
15
30
15
25
30
8.0
9.0
13
7.0
9.0
12
15 70
18 75
27 100
15 70
19 85
27 115
7.0
7.0
11
6.0
7.0
9.0
14
16
23
14
17
24
d3
C-4
C-4
3-5
C-4
C-4
3-5
ER
type
36
type
250
350
0.9
1.3
3.4
6.3
8.8
0.7
0.9
2.8
5.4
8.4
2.3
4.6
7.6
2.1
4.3
7.0
4.3
6.9
4.2
5.9
560
2.6
3.9
580 600C
2.8
2.1
wt.
[kg]
88
138
188
188
188
150
200
220
220
220
55
80
110
110
110
285
285
290
50
100
150
150
150
1.5
2.6
3.7
3.8
4.3
100
49 08 11 1.2
49 08 12 1.7
49 08 25 4.0
49 08 35 7.0
49 08 45 10.3
4.18
Selection table
OD 88.9
Pipe clamps, clamp bases, OD 88.9 (ND 80), type 42, 43, 45, 46, 48, 49
d4
type
100
42 09 17
5.0
type
100
250
350
560
580 600C
d4
wt.
[kg]
load
group
13
100
121
32
0.60
C-2
E
A
d2
250
350
560
580
d2
wt.
[kg]
load
group
M12
70
40
1.0
C-2
600C
d1
wt.
[kg]
load
group
2.5
12
16
12
16
12
170
170
235
235
235
40
40
50
50
50
1.4
1.4
1.9
1.9
2.5
C-D
1-4
C-D
1-4
C-4
600C
42 09 19 6.3
4.5
3.5
Heat-resistant materials, see pp. 0.9 and 4.4
d1
d1
type 46
L
EK
d3
type
100
250
350
43 09 18
43 09 19
43 09 38
43 09 39
43 09 49
2.5
7.4
2.5
5.7
11
9.9
2.5
4.1
2.5
8.5
type
100
250
17
27
13
23
12
19
8.9
14
5.0
6.6
10
5.0
5.2
7.9
45 09 19
45 09 11
45 09 12
45 09 19
45 09 11
45 09 12
45 09 19
45 09 11
45 09 12
45 09 19
45 09 11
45 09 12
9.0
13
7.1
10
350
2.5
7.3
2.5
6.3
6.1
2.5
5.2
6.0
560
2.5
3.4
6.0
580
1.7
1.7
4.7
560
3.4
580 600C
5.0
9.5
16
5.0
6.4
10
3.7
4.7
7.3
3.7
3.7
5.6
d1
12
16
16
12
16
16
12
16
16
12
16
16
25
30
30
25
30
30
25
30
30
25
30
30
70
70
100
70
70
100
70
70
100
70
70
100
300
300
300
450
450
450
600
600
600
750
750
750
wt. load
[kg] group
6.7
6.7
9.5
9.2
9.2
13.0
11.6
11.6
16.5
14.1
14.1
20.1
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
C-D
1-4
1-4
type 48
L
ER
d3
36
type
4. 09 31 17
4. 09 32 22
4. 09 33 45
4. 09 41
4. 09 42
4. 09 43
16
21
44
16
20
42
15
20
40
11
15
28
27
10 7.9 5.0
13 10 6.7
25 20 12
7.3 5.3 3.9
10 8.1 5.9
27 26 19 14 10
21
21
25
21
21
25
350
350
350
350
350
350
850
850
850
850
850
850
15
25
35
15
25
35
8.0
8.0
12
8.0
9.0
13
19 75
24 85
35 100
18 75
24 100
36 105
7.0
7.0
10
7.0
8.0
9.0
16
19
27
17
21
29
C-4
C-4
3-5
C-4
C-4
3-5
4.19
type
100
250
350
49 09 11
49 09 12
49 09 25
49 09 35
49 09 45
1.8
2.5
4.0
7.0
10.3
1.4
1.9
3.4
6.3
8.9
1.0
1.3
2.8
5.4
8.4
2.3
4.6
7.6
2.1
4.3
7.0
4.3
6.9
4.2
6.5
560
2.6
4.5
580 600C
3.3
2.4
wt.
[kg]
94
144
244
244
244
150
200
270
270
270
60
85
146
146
146
340
340
340
50
100
200
200
200
2.3
3.8
5.4
5.8
6.7
Selection table
OD 108
Pipe clamps, clamp bases, OD 108 (ND 100), type 42, 43, 45, 46, 48, 49
560
580
d2
wt.
[kg]
load
group
M16
90
50
2.0
1-4
600C
d1
wt.
[kg]
load
group
2.5
4.3
12
16
12
12
16
12
16
200
200
240
270
270
270
270
50
50
40
50
50
70
70
2.5
2.5
1.3
3.0
3.0
4.1
4.1
C-D
1-4
C-4
C-D
1-4
C-D
1-4
600C
100
250
350
43 10 18
43 10 19
43 10 29
43 10 38
43 10 39
43 10 48
43 10 49
2.5
10
2.5
8.3
2.5
6.0
3.3
type
45 10 19
45 10 11
45 10 19
45 10 11
45 10 19
45 10 11
45 10 19
45 10 11
15
14
100
250
17
13
12
9.3
9.4
7.0
5.0
5.6
7.5
11
2.8
2.5
10
2.0
2.5
8.6
2.5
7.1
14
13
13
13
350
560
2.5
4.6
2.5
12
580
2.4
2.4
2.5
7.8
560
2.5
5.7
580 600C
5.0
9.7
5.0
6.7
5.0
5.0
4.0
4.0
d1
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
80
80
80
80
80
80
80
80
350
350
500
500
650
650
800
800
wt. load
[kg] group
8.7
8.7
11.6
11.6
14.4
14.4
17.2
17.2
d1
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
type
42 10 19 10
7.8
6.0
Heat-resistant materials, see pp. 0.9 and 4.4
350
d2
250
d1
100
type
type 46
L
EK
d3
4. 10 12
4. 10 31
4. 10 32
4. 10 33
4. 10 41
4. 10 42
4. 10 43
14
22
37
66
10
21
37
64
20
34
60
16
23
40
15
21
37
11 6.6
16 10
29 18
10 8.1 5.9
14 10 7.9
27 26 20 15
25
21
25
34
21
25
34
L
min max
type 46
type 48
load
EK [kg min] [kg max] ER [kg min] [kg max] group
350
350
350
350
350
350
350
5
15
25
35
15
25
35
800
950
950
950
950
950
950
9.0
10
15
19
10
14
18
18
26
37
51
28
36
52
70
85
85
120
100
110
130
7.0
8.0
10
16
8.0
10
15
16
23
31
44
26
31
44
type 48
3-5
C-4
3-5
3-6
C-4
3-5
3-6
L
d3
ER
type
51
type
250
350
1.8
2.4
4.2
6.8
8.9
1.3
1.8
3.5
5.8
8.4
2.8
4.9
7.6
2.6
4.7
7.0
4.6
6.9
4.5
6.5
560
2.6
4.5
580 600C
3.3
2.4
wt.
[kg]
154
204
254
254
254
150
200
265
265
270
95
125
152
152
152
345
345
350
100
150
200
200
200
4.0
6.3
7.9
8.1
9.3
100
49 10 11 2.3
49 10 12 3.2
49 10 25 4.9
49 10 35 7.6
49 10 45 10.3
4.20
Selection table
OD 114.3
Pipe clamps, clamp bases, OD 114.3 (ND 100), type 42, 43, 45, 46, 48, 49
type
d2
250
350
560
d2
wt.
[kg]
load
group
M16
90
50
2.1
1-4
600C
d1
wt.
[kg]
load
group
2.5
4.3
12
16
12
12
16
12
16
200
200
240
270
270
270
270
50
50
40
50
50
70
70
2.6
2.6
1.5
3.0
3.0
4.2
4.2
C-D
1-4
C-4
C-D
1-4
C-D
1-4
580
600C
42 11 19 10
7.8
6.0
Heat-resistant materials, see pp. 0.9 and 4.4
d1
100
type
100
250
350
43 11 18
43 11 19
43 11 29
43 11 38
43 11 39
43 11 48
43 11 49
2.5
10
2.5
8.3
2.5
6.0
3.3
type
100
250
17
13
12
9.3
9.4
7.0
5.0
5.6
15
14
11
2.7
2.5
9.6
2.0
2.5
8.6
2.5
7.1
14
13
13
13
d1
type 46
45 11 19
45 11 11
45 11 19
45 11 11
45 11 19
45 11 11
45 11 19
45 11 11
7.5
350
560
2.5
4.6
2.5
12
580
2.4
2.4
2.5
7.8
560
2.5
5.7
580 600C
5.0
9.7
5.0
6.7
5.0
5.0
4.0
4.0
d1
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
80
80
80
80
80
80
80
80
350
350
500
500
650
650
800
800
wt. load
[kg] group
8.8
8.8
11.6
11.6
14.4
14.4
17.3
17.3
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
EK
d3
type 48
type
ER
d3
51
4. 11 12
4. 11 31
4. 11 32
4. 11 33
4. 11 41
4. 11 42
4. 11 43
14
22
36
64
10
21
35
63
20
33
59
16
23
40
15
21
37
11 6.6
16 10
29 18
10 8.1 5.9
14 10 7.9
27 26 20 15
25
21
25
34
21
25
34
350
350
350
350
350
350
350
800
950
950
950
950
950
950
5
15
25
35
15
25
35
9.0
10
16
20
10
14
18
18
28
37
51
29
36
53
70
85
85
120
100
110
130
7.0
8.0
10
16
8.0
10
15
16
23
31
44
26
31
44
3-5
C-4
3-5
3-6
C-4
3-5
3-6
type
4.21
100
250
350
49 11 11 2.3
49 11 12 3.2
49 11 25 5.0
49 11 35 7.6
49 11 45 10.3
1.8
2.4
4.2
6.8
8.9
1.3
1.8
3.5
5.9
8.4
2.9
5.0
7.6
2.7
4.7
7.0
4.7
6.9
4.5
6.5
560
2.7
4.5
580 600C
3.3
2.4
wt.
[kg]
157
207
257
257
257
150
200
265
265
265
95
125
152
152
152
345
345
350
100
150
200
200
200
4.1
6.4
7.9
8.3
9.4
Selection table
OD 133
Pipe clamps, clamp bases, OD 133 (ND 125), type 42, 43, 45, 46, 48, 49
560
d2
wt.
[kg]
load
group
M16
100
50
2.2
1-4
600C
d1
wt.
[kg]
load
group
2.5
3.8
12
16
12
16
12
16
12
16
220
220
270
270
290
290
290
290
50
50
50
50
60
60
70
70
2.8
2.8
2.3
2.3
3.9
3.9
5.6
5.6
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
580
600C
100
250
350
43 13 18
43 13 19
43 13 28
43 13 29
43 13 38
43 13 39
43 13 48
43 13 49
2.5
10
2.5
8.3
2.5
6.0
2.5
5.1
2.5
4.3
13
12
14
14
type
100
45 13 19
45 13 11
45 13 19
45 13 11
45 13 19
45 13 11
45 13 19
45 13 11
250
18
14
13
9.7
9.9
7.4
5.0
5.9
8.0
350
10
2.5
3.1
2.5
8.8
2.5
7.3
2.5
4.8
13
13
13
10
560
580
2.5
2.5
2.5
6.9
560
2.5
5.1
580 600C
5.0
10
5.0
6.9
5.0
5.3
4.2
4.2
d1
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
90
90
90
90
90
90
90
90
400
400
550
550
700
700
850
850
wt. load
[kg] group
11.1
11.1
14.3
14.3
17.5
17.5
20.6
20.6
L
d1
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
type
16
42 13 19
10
7.8
5.5
Heat-resistant materials, see pp. 0.9 and 4.4
350
d2
250
d1
100
type
type 46
L
d3
23
24
40
72
19
23
38
70
13
23
38
67
22
35
62
20
25
45
17
22
40
33
13 7.1
17 11
31 18
12 9.2 7.0
25 18 13 10
33 31 23 17
25
21
25
34
21
25
34
370
400
400
400
400
400
400
850
1000
1000
1000
1000
1000
1000
10
15
30
40
15
30
40
12
13
17
26
13
18
26
23
34
43
59
34
45
66
70
95
100
130
105
115
145
8.0
9.0
13
19
11
13
20
20
26
36
50
31
38
53
EK
4. 13 12
4. 13 31
4. 13 32
4. 13 33
4. 13 41
4. 13 42
4. 13 43
3-5
C-4
3-5
4-6
C-4
3-5
4-6
type 48
L
d3
ER
type
51
49 13 11 2.5
49 13 12 3.8
49 13 25 8.3
49 13 35 12.1
49 13 45
2.0
3.0
7.0
10.9
1.4
2.0
5.8
9.3
4.8
8.0
4.4
7.5
7.4
7.0
6.5
560
3.7
4.5
580 600C
3.3
2.4
wt.
[kg]
167
217
267
267
267
150
200
270
270
275
105
130
160
160
160
350
350
350
100
150
200
200
200
5.3
8.3
9.6
9.8
9.7
350
250
100
type
4.22
Selection table
OD 139.7
Pipe clamps, clamp bases, OD 139.7 (ND 125), type 42, 43, 45, 46, 48, 49
type
d2
250
350
560
580
d2
wt.
[kg]
load
group
M16
105
50
2.4
1-4
600C
d1
wt.
[kg]
load
group
2.5
3.8
12
16
12
16
12
16
12
16
225
225
275
275
295
295
295
295
50
50
50
50
60
60
70
70
2.9
2.9
2.5
2.5
4.1
4.1
5.7
5.7
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
600C
42 14 19 9.6
7.4
5.3
Heat-resistant materials, see pp. 0.9 and 4.4
d1
100
d1
type 46
type
100
250
350
43 14 18
43 14 19
43 14 28
43 14 29
43 14 38
43 14 39
43 14 48
43 14 49
2.5
10
2.5
8.3
2.5
5.9
2.5
5.1
2.5
4.1
13
11
14
14
type
100
250
18
14
13
9.7
9.9
7.4
5.0
5.9
45 14 19
45 14 11
45 14 19
45 14 11
45 14 19
45 14 11
45 14 19
45 14 11
16
8.0
350
10
2.5
3.1
2.5
8.8
2.5
7.3
13
13
13
560
2.5
4.8
2.5
10
580
2.4
2.4
2.5
6.9
560
2.5
5.1
580 600C
5.0
10
5.0
6.9
5.0
5.3
4.2
4.2
d1
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
90
90
90
90
90
90
90
90
400
400
550
550
700
700
850
850
wt. load
[kg] group
11.2
11.2
14.3
14.3
17.5
17.5
20.7
20.7
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
EK
d3
type 48
L
51
type
4.23
4. 14 12
4. 14 31
4. 14 32
4. 14 33
4. 14 41
4. 14 42
4. 14 43
18
23
39
68
12
23
39
67
22
36
62
20
26
45
17
23
40
33
13 7.1
17 11
30 18
12 9.3 6.9
25 18 13 10
33 31 23 17
25
21
25
34
21
25
34
400
400
400
400
400
400
400
850
1000
1000
1000
1000
1000
1000
10
15
30
40
15
30
40
11
13
20
26
14
19
25
24
34
44
59
35
46
66
70
95
100
130
105
115
145
8.0
10
13
20
11
13
20
20
27
36
50
31
38
53
3-5
C-4
3-5
4-6
C-4
3-5
4-6
ER
d3
type
100
250
350
49 14 11 2.5
49 14 12 3.8
49 14 25 8.3
49 14 35 12.3
49 14 45
2.0
3.0
7.0
11.0
1.4
2.0
5.9
9.3
4.8
8.0
4.5
7.6
7.5
7.1
6.5
560
3.8
4.5
580 600C
3.4
2.5
wt.
[kg]
170
220
270
270
270
150
200
270
270
275
105
130
160
160
160
350
350
350
100
150
200
200
200
5.5
8.5
9.7
10.1
9.9
Selection table
OD 159
Pipe clamps, clamp bases, OD 159 (ND 150), type 42, 43, 46, 48, 49
350
560
580
d2
wt.
[kg]
load
group
M16
115
50
2.5
1-4
600C
d1
wt.
[kg]
load
group
2.5
5.1
12
16
12
16
12
16
12
16
245
245
300
300
315
315
315
315
50
50
50
50
80
80
80
80
3.1
3.1
3.4
3.4
6.9
6.9
8.4
8.4
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
600C
42 16 19 8.6
6.6
4.7
Heat-resistant materials, see pp. 0.9 and 4.4
type
100
250
350
43 16 18
43 16 19
43 16 28
43 16 29
43 16 38
43 16 39
43 16 48
43 16 49
2.5
9.7
2.5
7.5
11
9.5
2.5
5.4
2.5
7.9
2.5
6.4
15
14
14
13
d2
250
2.5
4.9
2.5
13
2.5
13
2.5
8.5
12
12
560
580
2.5
4.3
2.5
9.3
2.5
6.9
d1
100
type
type 46
L
18
29
49
84
15
24
24
47
80
11
17
23
47
79
22
44
71
19
30
53
17
28
47
36
13 7.0
21 13
36 21
12 9.3 7.0
19 14 10
36 35 26 20
21
25
21
25
34
21
25
34
400
400
450
450
450
450
450
450
900
900
1050
1050
1050
1050
1050
1050
15
15
25
40
50
25
40
50
11
13
16
23
32
17
21
33
23
32
36
52
75
38
51
79
90
85
100
120
150
110
130
165
9.0
10
11
17
25
13
17
26
21
25
31
44
63
35
45
67
C-4
3-5
C-4
3-5
4-6
C-4
3-5
4-6
EK
4. 16 11
4. 16 12
4. 16 31
4. 16 32
4. 16 33
4. 16 41
4. 16 42
4. 16 43
d3
type 48
L
d3
ER
type
63
49 16 11
49 16 14
49 16 25
49 16 35
49 16 45
2.5
4.4
9.5
17
2.0
3.8
8.1
15
1.4
3.6
6.7
13
5.5
11
5.0
10
10
9.9
9.5
560
5.5
6.5
580 600C
4.9
3.6
wt.
[kg]
180
230
280
280
280
200
240
315
320
320
115
140
171
171
171
340
395
400
400
100
150
200
200
200
6.7
9.2
11.0
12.7
12.4
350
250
100
type
4.24
Selection table
OD 168.3
Pipe clamps, clamp bases, OD 168.3 (ND 150), type 42, 43, 46, 48, 49
type
d2
250
350
560
580
d2
wt.
[kg]
load
group
M16
120
50
2.6
1-4
600C
d1
wt.
[kg]
load
group
2.5
5.1
12
16
12
16
12
16
12
16
250
250
300
300
320
320
320
320
50
50
50
50
80
80
80
80
3.2
3.2
3.6
3.6
7.3
7.3
8.5
8.5
C-D
1-4
C-D
1-4
C-D
1-4
C-D
1-4
600C
42 17 19 8.2
6.3
4.5
Heat-resistant materials, see pp. 0.9 and 4.4
d1
100
type
100
250
350
43 17 18
43 17 19
43 17 28
43 17 29
43 17 38
43 17 39
43 17 48
43 17 49
2.5
9.3
2.5
7.1
11
9.5
2.5
5.1
2.5
7.9
2.5
6.4
15
14
14
13
2.5
4.9
2.5
13
2.5
13
2.5
8.5
12
12
560
580
2.5
4.3
2.5
9.3
2.5
6.9
type 46
L
d3
EK
type
type 48
L
63
4.25
18
29
49
84
15
24
24
47
80
11
17
23
47
79
22
43
72
19
31
53
17
28
47
13
21
36
36
36
7
13
21
12 9.3 6.9
19 14 10
35 26 20
21
25
21
25
34
21
25
34
410
410
450
450
450
450
450
450
900
900
1050
1050
1050
1050
1050
1050
15
15
25
40
50
25
40
50
12
17
16
23
33
17
23
34
23
33
38
53
74
38
53
80
90
85
100
120
150
110
130
165
9.0
10
11
17
26
13
18
26
22
25
31
44
64
35
45
67
C-4
3-5
C-4
3-5
4-6
C-4
3-5
4-6
ER
d3
4. 17 11
4. 17 12
4. 17 31
4. 17 32
4. 17 33
4. 17 41
4. 17 42
4. 17 43
type
100
250
350
49 17 11
49 17 14
49 17 25
49 17 35
49 17 45
2.5
4.7
9.6
17
2.0
4.1
8.2
15
1.4
3.9
6.8
13
5.6
11
5.2
10
10
10
9.6
560
5.6
6.6
580 600C
4.9
3.6
wt.
[kg]
184
234
284
284
284
200
240
315
320
320
120
152
171
171
171
340
395
400
400
100
150
200
200
200
6.9
9.6
11.1
12.7
12.5
Selection table
OD 193.7
Pipe clamps, clamp bases, OD 193.7 (ND 175), type 42, 43, 46, 48, 49
350
560
580
d2
wt.
[kg]
load
group
M16
135
50
2.9
1-4
600C
d1
wt.
[kg]
load
group
8.6
8.6
12
16
12
16
16
20
16
20
270
270
335
335
355
355
355
355
50
50
50
50
70
70
100
100
4.7
4.7
4.2
4.2
10.8
10.8
15.4
15.4
C-D
1-5
C-D
1-5
1-3
3-6
1-3
3-6
600C
type
100
250
350
43 19 18
43 19 19
43 19 28
43 19 29
43 19 38
43 19 39
43 19 48
43 19 49
2.5
12
2.5
10
2.5
7.2
2.5
6.8
10
20
23
10
21
42 19 19 7.1
5.5
3.9
Heat-resistant materials, see pp. 0.9 and 4.4
2.5
5.5
9.6
19
d2
250
2.5
4.2
9.4
19
9.3
19
11.3
19
9.2
14
11.3
19
560
580
7.5
7.5
11.3
15
11
11
d1
100
type
type 46
46
91
43
83
14
22
25
40
42
81
23
37
40
78
16
26
15
28
39
70
15
25
35
64
60
type
100
250
350
49 19 13
49 19 14
49 19 25
49 19 35
49 19 45
4.6
7.3
12
24
4.2
6.2
11
21
4.0
5.9
9.3
18
11 6.0
19 10
26 13
48 25
10 8.0 5.9
17 13 10
24 18 13
58 46 34 24
7.6
16
7.0
15
14
14
13
21
25
21
25
21
25
25
41
21
25
25
41
450
460
460
460
550
550
550
550
550
550
550
550
950
950
1000
1000
1150
1150
1150
1150
1150
1150
1150
1150
15
20
15
30
25
30
40
50
25
30
40
50
15
18
17
24
19
27
34
48
20
28
36
53
29
41
39
51
41
54
64
98
42
58
77
108
80
90
100
110
110
110
130
160
115
130
140
160
10
13
12
16
15
19
24
37
17
21
26
39
26
33
32
42
32
42
52
79
37
50
61
89
C-4
3-5
C-4
3-5
C-4
3-5
3-5
4-7
C-4
3-5
3-5
4-7
d3
EK
42
19
31
25
41
type 48
L
d3
ER
24
38
63
560
9.0
9.4
580 600C
7.1
5.2
wt.
[kg]
197
247
297
347
347
240
240
320
315
315
130
152
181
203
203
345
355
400
415
415
100
150
200
250
250
8.7
11.6
13.3
18.7
18.7
4. 19 11
4. 19 12
4. 19 21
4. 19 22
4. 19 31
4. 19 32
4. 19 33
4. 19 34
4. 19 41
4. 19 42
4. 19 43
4. 19 44
type
4.26
Selection table
OD 219.1
Pipe clamps, clamp bases, OD 219.1 (ND 200), type 42, 43, 44, 46, 48, 49
type
d2
E
E
d3
E
350
100
250
350
43 22 18
43 22 19
43 22 28
43 22 29
2.5
11
2.5
9.0
12
11
2.5
6.4
2.5
9.4
2.5
7.7
type
100
250
350
44 22 12
44 22 31
44 22 32
44 22 33
44 22 41
44 22 42
44 22 43
30
25
20
12
28
53
type
EK
d3
type 48
L
ER
d3
4. 22 11
4. 22 12
4. 22 21
4. 22 22
4. 22 31
4. 22 32
4. 22 33
4. 22 34
4. 22 41
4. 22 42
4. 22 43
4. 22 44
34
67
79
30
59
69
66
E
H
4.27
580
d2
wt.
[kg]
load
group
M16
145
50
3.1
1-4
d1
wt.
[kg]
load
group
12
16
12
16
295
295
365
365
50
50
50
50
5.0
5.0
5.6
5.6
C-D
1-5
C-D
1-5
600C
d3
wt.
[kg]
load
group
5.1
11
18
34
21
34
46
21
34
46
275
375
375
375
375
375
375
85
94
96
122
103
110
132
9.0
9.0
13
22
10
15
24
3-6
C-4
4-6
5-8
C-4
4-6
5-8
600C
560
580
600C
2.5
5.5
10
26
45
9.4
24
41
59
56
9.3
23
40
55
560
8.9
20
39
580
6.1
11
20
8.9
19
33
50
6.9
14
24
20
33
33
48
14
24
33
48
30
44
36
61 59 57 55
113 108 105 101
21
30
15
35
51
88
15
32
45
79
61
560
type
type 46
79
250
42 22 19 6.7
5.2
3.7
Heat-resistant materials, see pp. 0.9 and 4.4
d1
100
type
100
250
350
49 22 13
49 22 14
49 22 25
49 22 35
49 22 45
7.1
10
12
27
6.5
9.2
12
26
6.2
8.6
10
22
11 6.1
24 13
34 18
60 31
10 8.0 5.9
23 17 12
36 32 24 18
60 55 42 31
8.9
19
8.2
18
17
17
15
21
25
25
34
21
25
41
46
21
25
41
46
560
9.6
10
480
480
480
480
550
550
550
550
550
550
550
550
1100
1100
1200
1200
1350
1350
1350
1350
1350
1350
1350
1350
580 600C
8.1
6.0
15
25
35
40
25
40
50
60
25
40
50
60
16
24
26
30
21
36
44
64
22
39
48
69
38
54
64
75
50
79
102
142
54
93
113
165
105
110
120
150
130
150
170
200
130
155
185
200
12
16
18
24
17
25
32
48
19
28
34
51
36
46
52
64
44
67
83
119
50
76
93
133
C-4
3-5
3-5
4-6
C-4
3-5
4-7
5-8
C-4
3-5
4-7
5-8
wt.
[kg]
210
260
360
360
360
235
250
325
315
315
130
156
210
210
210
350
365
410
415
415
100
150
250
250
250
10.1
13.6
16.5
20.2
19.8
Selection table
OD 244.5
Pipe clamps, clamp bases, OD 244.5 (ND 225), type 42, 43, 44, 46, 48, 49
560
580
d2
wt.
[kg]
load
group
M16
160
50
3.3
1-4
d1
wt.
[kg]
load
group
12
16
12
16
310
310
390
390
50
50
50
50
6.1
6.1
5.8
5.8
C-D
1-5
C-D
1-5
600C
d3
wt.
[kg]
load
group
5.0
11
18
34
46
21
34
46
21
34
46
300
330
390
390
390
390
390
390
75
81
94
96
122
103
110
132
9.0
12
9.0
14
23
11
16
25
3-6
5-8
C-4
4-6
5-8
C-4
4-6
5-8
600C
42 24 19 6.1
4.7
3.3
Heat-resistant materials, see pp. 0.9 and 4.4
100
250
350
43 24 18
43 24 19
43 24 28
43 24 29
2.5
12
2.5
11.4
10
2.5
8.2
2.5
8.7
2.5
7.1
type
100
250
350
44 24 12
44 24 13
44 24 31
44 24 32
44 24 33
44 24 41
44 24 42
44 24 43
20
40
16
35
13
29
11
29
52
79
57
68
65
560
580
600C
2.5
5.5
9.8
26
44
9.1
24
41
59
55
9.0
23
40
54
560
8.5
20
39
580
6.0
11
20
8.9
18
33
50
6.9
14
24
type
65
d2
350
d1
250
100
d3
type
type 46
30
50
25
42
57
55
18
30
38
54
35
49
41
66 64 62 59
122 117 113 109
25
34
18
40
56
96
16
36
50
86
13 7.0
27 14
38 20
66 35
12 9.2 6.9
24 18 13
37 36 27 20
64 61 46 34
25
34
25
34
25
25
41
46
25
25
41
46
490
500
500
520
550
550
550
550
550
550
550
550
1100
1100
1200
1200
1350
1350
1350
1350
1350
1350
1350
1350
25
35
40
45
30
45
50
60
30
45
50
60
21
33
30
39
25
40
50
72
26
43
53
77
47
63
68
80
56
86
110
156
61
100
123
178
100
120
130
150
110
150
160
180
120
150
160
190
14
21
21
28
17
28
34
51
20
29
36
54
39
52
56
70
47
74
88
124
54
80
98
142
3-5
4-6
3-5
4-6
3-5
3-5
4-7
5-8
3-5
3-5
4-7
5-8
d3
EK
4. 24 11
4. 24 12
4. 24 21
4. 24 22
4. 24 31
4. 24 32
4. 24 33
4. 24 34
4. 24 41
4. 24 42
4. 24 43
4. 24 44
type 48
L
d3
ER
type
79
100
250
350
49 24 13
49 24 14
49 24 25
49 24 35
49 24 45
7.1
11
21
34
6.6
10
18
32
6.2
9.5
15
30
12
26
11
24
24
24
21
22
560
12
15
580 600C
11
8.7
wt.
[kg]
222
272
372
372
372
235
250
315
320
320
130
171
222
222
222
350
365
415
420
420
100
150
250
250
250
10.6
14.9
20.5
24.4
24.4
type
4.28
Selection table
OD 267
Pipe clamps, clamp bases, OD 267 (ND 250), type 42, 43, 44, 46, 48, 49
type
d2
E
E
d3
E
250
350
560
580
d2
wt.
[kg]
load
group
M20
175
60
4.6
3-4
d1
wt.
[kg]
load
group
16
24
16
24
340
340
410
410
70
70
70
70
12.0
12.0
10.5
10.5
1-3
3-6
1-3
3-6
600C
d3
wt.
[kg]
load
group
4.9
11
18
34
46
21
34
46
21
34
46
340
360
425
425
425
425
425
425
75
112
94
96
122
110
117
132
10
20
10
16
24
13
19
27
4-6
5-8
C-4
4-6
5-8
C-4
4-6
5-8
600C
42 26 19 6.3
4.9
3.5
Heat-resistant materials, see pp. 0.9 and 4.4
d1
100
type
100
250
350
43 26 18
43 26 19
43 26 28
43 26 29
9.6
28
9.0
21
18
8.6
15
11.3
15
11.3
12
type
100
250
350
44 26 12
44 26 13
44 26 31
44 26 32
44 26 33
44 26 41
44 26 42
44 26 43
26
61
22
54
16
44
10
25
48
72
61
59
560
580
600C
9.6
9.6
9.1
23
40
8.5
22
37
53
50
8.4
21
36
560
8.0
19
35
49
580
5.6
11
20
7.9
20
33
45
6.3
15
24
type 46
L
EK
d3
type 48
L
ER
d3
92
type
4. 26 11
4. 26 12
4. 26 21
4. 26 22
4. 26 31
4. 26 32
4. 26 33
4. 26 34
4. 26 41
4. 26 42
4. 26 43
4. 26 44
29
43
21
31
40
55
26
36
20
42 40
73 67 65 62 58
134 122 119 115 100
58
56
37
51
20
37
53
90
70
15 8.0
28 15
40 21
69 36
14
27
39 38
70 65
10
20
28
49
7.9
15
21
36
25
34
25
34
25
25
41
46
25
25
41
46
520
550
550
560
600
600
600
600
600
600
600
600
1150
1150
1300
1300
1400
1400
1400
1400
1400
1400
1400
1400
35
45
30
50
30
50
50
70
30
50
50
70
25
37
35
42
35
47
57
83
36
51
64
90
55
69
78
99
66
96
120
172
74
111
137
199
105
130
140
150
120
150
160
185
140
175
165
205
18
26
26
33
21
33
42
57
25
35
44
63
47
59
66
85
55
79
98
137
64
90
110
158
3-5
4-6
3-5
4-6
3-5
3-5
4-7
5-8
3-5
3-5
4-7
5-8
4.29
type
100
250
350
49 26 13
49 26 14
49 26 25
49 26 35
49 26 45
8.7
17
25
41
7.9
15
21
35
7.5
14
18
34
14
31
13
29
27
25
27
22
25
560
14
17
580 600C
13
9.8
wt.
[kg]
234
284
384
384
384
240
255
340
345
345
160
171
229
229
229
365
395
450
460
460
100
150
250
250
250
13.7
19.3
24.6
29.3
28.3
Selection table
OD 273
Pipe clamps, clamp bases, OD 273 (ND 250), type 42, 43, 44, 46, 48, 49
560
580
d2
wt.
[kg]
load
group
M20
180
60
4.7
3-4
d1
wt.
[kg]
load
group
16
24
16
24
340
340
415
415
70
70
70
70
12.5
12.5
11.0
11.0
1-3
3-6
1-3
3-6
600C
d3
wt.
[kg]
load
group
5.0
11
18
34
46
21
34
46
21
34
46
340
360
425
425
425
425
425
425
75
112
94
96
122
110
117
132
10
20
10
16
25
13
19
27
4-6
5-8
C-4
4-6
5-8
C-4
4-6
5-8
600C
42 27 19 6.2
4.7
3.4
Heat-resistant materials, see pp. 0.9 and 4.4
100
250
350
43 27 18
43 27 19
43 27 28
43 27 29
9.6
27
9.0
21
18
8.6
15
11.3
15
11.3
12
type
100
250
350
44 27 12
44 27 13
44 27 31
44 27 32
44 27 33
44 27 41
44 27 42
44 27 43
26
60
22
54
16
44
10
26
48
62
60
560
580
600C
9.6
9.6
9.2
24
40
8.6
22
38
54
51
8.5
21
37
560
8.1
19
36
50
580
5.7
11
21
8.0
20
33
46
6.4
15
24
type
73
d2
350
d1
250
100
d3
type
type 46
35
53
29
43
20
31
41
54
27
36
20
42 41
73 67 65 62 58
134 122 119 115 100
57
55
39
50
20
37
53
89
70
15 8.0
28 15
40 21
69 36
14
27
39 38
70 65
10
20
28
49
7.9
14
20
35
25
34
25
34
25
25
41
46
25
25
41
46
480
520
550
570
600
600
600
600
600
600
600
600
1150
1150
1300
1300
1400
1400
1400
1400
1400
1400
1400
1400
35
45
45
50
30
50
50
70
30
50
50
70
27
39
36
47
35
48
58
88
37
51
65
94
57
70
80
100
67
97
121
173
75
111
138
203
105
130
140
150
120
150
160
185
140
175
165
205
16
25
29
34
22
33
42
57
25
35
44
63
47
59
69
85
55
79
98
137
64
90
111
159
3-5
4-6
3-5
4-6
3-5
3-5
4-7
5-8
3-5
3-5
4-7
5-8
d3
EK
4. 27 11
4. 27 12
4. 27 21
4. 27 22
4. 27 31
4. 27 32
4. 27 33
4. 27 34
4. 27 41
4. 27 42
4. 27 43
4. 27 44
type 48
L
d3
ER
type
92
100
250
350
49 27 13
49 27 14
49 27 25
49 27 35
49 27 45
8.7
17
25
39
7.9
15
22
35
7.5
14
18
34
14
31
13
29
28
25
28
22
25
560
14
17
580 600C
13
10
wt.
[kg]
237
287
387
387
387
240
255
340
345
345
160
171
229
229
229
360
395
450
460
460
100
150
250
250
250
13.9
19.4
24.7
29.5
28.5
type
4.30
Selection table
OD 323.9
Pipe clamps, clamp bases, OD 323.9 (ND 300), type 42, 43, 44, 46, 48, 49
type
d2
E
E
d3
E
350
560
type 46
L
EK
d3
type 48
L
ER
d3
type
100
250
350
43 32 18
43 32 19
43 32 28
43 32 29
9.6
28
9.0
22
29
24
8.6
15
11.3
19
11.3
16
type
100
250
350
44 32 12
44 32 13
44 32 31
44 32 32
44 32 33
44 32 41
44 32 42
44 32 43
38
73
32
61
25
51
21
46
74
type
118
250
580
d2
wt.
[kg]
load
group
M20
205
60
5.3
3-4
d1
wt.
[kg]
load
group
16
24
16
24
375
375
440
440
80
80
70
70
16.0
16.0
15.0
15.0
1-3
3-6
1-3
3-6
600C
d3
wt.
[kg]
load
group
9.8
18
30
46
51
25
41
46
25
41
46
375
390
470
470
470
470
470
470
80
113
110
115
165
143
132
189
17
28
19
27
47
22
31
53
5-8
6-9
3-5
5-7
5-8
3-5
5-7
5-8
600C
42 32 19 5.4
4.2
3.0
Heat-resistant materials, see pp. 0.9 and 4.4
d1
100
4. 32 11
4. 32 12
4. 32 13
4. 32 21
4. 32 22
4. 32 23
4. 32 31
4. 32 32
4. 32 33
4. 32 34
4. 32 35
4. 32 41
4. 32 42
4. 32 43
4. 32 44
4. 32 45
89
90
78
73
70
20
39
62
63
560
580
600C
11.3
13
19
36
58
59
18
35
57
560
16
34
55
58
580
11
20
36
17
32
55
57
13
24
41
25
43
62
88
62
85
18
31
49
28
61
84
27
56
77
68
99 96 93 89
125 124 122 115
202 185 179 166
20
39
55
29 27 21
63 56 43
85 75 58
110 98 75
144 131 101
62
78
102 101
12
22
31
40
53
21
40
54
70
93
16
29
40
53
70
11
21
30
39
51
25
34
41
25
34
46
25
41
46
46
51
25
41
46
46
51
570
570
590
620
650
700
620
650
670
670
790
700
700
700
700
800
1200
1200
1200
1300
1300
1300
1400
1400
1400
1400
1400
1400
1400
1400
1400
1400
35
40
55
30
30
30
50
50
50
50
50
50
50
50
50
50
31
42
63
41
56
76
49
76
89
106
145
55
83
98
115
154
58
77
101
72
111
132
89
135
164
190
239
106
153
190
224
268
120
140
135
120
150
160
150
180
195
205
200
165
180
210
225
235
22
30
39
27
42
58
32
51
61
71
88
39
53
70
80
101
52
69
90
64
93
109
76
111
131
154
181
88
122
145
174
212
3-5
4-6
5-7
3-5
4-6
5-8
3-5
4-7
5-8
5-8
6-9
3-5
4-7
5-8
5-8
6-9
4.31
type
100
250
350
49 32 13
49 32 14
49 32 25
49 32 35
49 32 45
13
20
31
46
50
12
17
26
40
43
11
16
22
38
41
18
34
37
16
32
34
28
34
25
32
560
16
22
580 600C
16
12
wt.
[kg]
262
362
412
412
412
250
255
340
345
345
180
229
248
254
254
375
395
450
460
460
100
200
250
250
250
17.2
27.0
27.8
32.7
32.3
Selection table
OD 355.6
Pipe clamps, clamp bases, OD 355.6 (ND 350), type 42, 43, 44, 46, 48, 49
560
580
d2
wt.
[kg]
load
group
M20
220
60
5.7
3-4
d1
wt.
[kg]
load
group
16
24
16
24
390
390
470
470
90
90
90
90
19.0
19.0
20.5
20.5
1-3
3-6
1-3
3-6
600C
d3
wt.
[kg]
load
group
9.9
18
31
46
51
25
41
46
25
41
46
400
420
485
485
485
485
485
485
85
113
110
122
165
143
132
189
20
30
21
31
49
24
33
55
6-8
6-9
3-5
5-7
5-8
3-5
5-7
5-8
600C
42 36 19 5.1
3.9
2.8
Heat-resistant materials, see pp. 0.9 and 4.4
250
350
43 36 18
43 36 19
43 36 28
43 36 29
9.6
29
9.0
23
33
28
8.6
16
11.3
23
11.3
19
type
100
250
350
44 36 12
44 36 13
44 36 31
44 36 32
44 36 33
44 36 41
44 36 42
44 36 43
48
82
41
66
32
53
21
47
74
type
4. 36 11
4. 36 12
4. 36 13
4. 36 21
4. 36 22
4. 36 23
4. 36 24
4. 36 31
4. 36 32
4. 36 33
4. 36 34
4. 36 35
4. 36 41
4. 36 42
4. 36 43
4. 36 44
4. 36 45
89
90
78
74
70
64
560
580
600C
11.3
15
19
36
58
60
18
35
57
560
16
34
55
59
580
11
21
36
17
32
55
57
13
24
42
80
100
134
195
30
50
72
21
40
55
25
35
76
95
24
33
71
88
17
24
77
49
96
62
25 24 18
32 32 25
74 67 60 46
129 125 120 112 102 79
186 180 174 167 149 115
10
13
24
41
61
18
25
43
73 72
139 138 107
13
19
32
54
80
10
14
23
40
58
34
34
46
25
34
41
51
25
34
41
46
51
25
34
41
46
51
660
660
660
660
660
770
790
700
700
710
720
790
700
700
800
800
800
1300
1300
1300
1400
1400
1400
1400
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
35
40
60
30
40
40
45
40
50
60
60
70
40
50
60
60
70
45
57
77
38
58
84
95
52
63
89
118
176
56
68
104
136
186
74
106
131
76
99
144
166
91
117
158
226
287
103
129
183
252
335
120
130
145
115
140
155
160
135
160
180
205
230
155
170
190
240
245
30
41
48
29
35
60
68
32
40
60
82
104
37
46
69
102
119
66
92
96
66
79
117
131
74
90
125
173
218
86
106
141
196
256
4-6
4-6
6-8
3-5
4-6
5-7
6-9
3-5
4-6
4-7
5-8
6-9
3-5
4-6
4-7
5-8
6-9
type 46
L
d3
EK
100
type 48
L
d3
ER
type
20
39
62
d2
350
d1
250
100
d3
type
118
100
250
350
49 36 13
49 36 14
49 36 25
49 36 35
49 36 45
22
26
31
62
21
22
30
59
56
19
21
30
52
54
24
45
48
22
42
45
42
44
39
41
560
23
28
580 600C
21
15
wt.
[kg]
278
378
428
478
478
300
300
400
400
400
230
235
260
280
280
445
455
510
525
525
100
200
250
300
300
25
34
34
46
46
type
4.32
Selection table
OD 368
Pipe clamps, clamp bases, OD 368 (ND 350), type 42, 43, 44, 46, 48, 49
type
d2
250
350
560
580
d2
wt.
[kg]
load
group
M20
225
60
5.8
3-4
d1
wt.
[kg]
load
group
16
24
16
24
395
395
475
475
90
90
90
90
18.5
18.5
21.0
20.5
1-3
3-6
1-3
3-6
600C
d3
wt.
[kg]
load
group
9.8
18
31
46
51
25
41
46
25
41
46
400
420
490
490
490
490
490
490
85
113
110
122
165
143
132
189
20
31
21
31
50
24
33
56
6-8
6-9
3-5
5-7
5-8
3-5
5-7
5-8
600C
42 37 19 5.0
3.9
2.8
Heat-resistant materials, see pp. 0.9 and 4.4
type
100
250
350
43 37 18
43 37 19
43 37 28
43 37 29
9.6
29
9.0
22
33
28
8.6
16
11.3
23
11.3
19
type
100
250
350
44 37 12
44 37 13
44 37 31
44 37 32
44 37 33
44 37 41
44 37 42
44 37 43
48
70
41
62
32
53
22
47
75
560
580
600C
11.3
15
d3
d1
100
type
type 46
L
EK
d3
type 48
L
ER
d3
118
91
79
70
21
39
63
64
19
37
58
60
18
36
57
560
16
35
56
59
580
11
21
36
17
32
55
58
13
24
42
4. 37 11 37 30 21
4. 37 12 66 50 40
4. 37 13 93 73 55
4. 37 21
25 23 17
4. 37 22
35 33 24
4. 37 23 80 77 76 70 49
4. 37 24 100 96 95 88 62
4. 37 31
25 24 18 10
4. 37 32
32 32 24 13
4. 37 33
76 69 61 47 25
4. 37 34 137 129 125 121 112 102 79 41
4. 37 35 199 199 191 178 167 149 114 61
4. 37 41
18
4. 37 42
25
4. 37 43
43
4. 37 44
79 72
4. 37 45
139 138 106
13
19
32
54
80
10
13
23
40
58
34
34
46
25
34
41
46
25
34
41
46
51
25
34
41
46
51
680
680
680
680
680
770
790
700
700
720
740
820
750
750
750
750
850
1300
1300
1300
1400
1400
1400
1400
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
35
40
60
30
40
40
45
40
50
60
60
70
40
50
60
60
70
46
62
80
39
49
79
101
53
64
89
124
179
59
72
100
135
195
73
107
133
78
101
144
169
93
115
161
229
292
104
131
180
255
339
120
130
145
115
140
155
160
135
160
180
220
230
155
170
190
240
245
31
42
49
29
36
61
68
32
41
62
85
108
39
49
67
98
125
67
93
96
66
79
117
132
75
90
127
177
220
86
106
142
197
257
4-6
4-6
6-8
3-5
4-6
5-7
6-8
3-5
4-6
4-7
5-8
6-9
3-5
4-6
4-7
5-8
6-9
4.33
type
100
250
350
49 37 13
49 37 14
49 37 25
49 37 35
49 37 45
22
27
32
63
66
21
23
31
61
59
19
22
30
54
56
24
46
50
23
43
47
42
46
40
43
560
24
30
580 600C
22
16
wt.
[kg]
284
384
434
484
484
300
300
400
400
400
230
241
260
292
292
445
460
510
525
525
100
200
250
300
300
25
34
35
48
47
Selection table
OD 406.4
Pipe clamps, clamp bases, OD 406.4 (ND 400), type 42, 43, 44, 46, 48, 49
250
350
560
580
d2
wt.
[kg]
load
group
M24
255
70
9.7
3-5
d1
wt.
[kg]
load
group
16
24
16
24
430
430
500
500
100
100
100
100
23.0
23.0
24.5
24.5
1-3
3-6
1-3
3-6
600C
d3
wt.
[kg]
load
group
9.6
23
34
51
61
41
51
25
46
51
25
46
51
440
450
500
500
520
520
520
520
520
520
92
135
117
135
110
144
149
143
164
189
26
35
25
38
23
44
63
26
58
92
6-9
7-10
5-7
6-9
3-5
5-8
6-9
3-5
5-8
6-9
600C
42 41 19 8.0
6.2
4.5
Heat-resistant materials, see pp. 0.9 and 4.4
d2
100
type
100
250
350
43 41 18
43 41 19
43 41 28
43 41 29
9.6
30
9.0
23
33
28
8.6
16
11.3
23
11.3
20
type
100
250
350
44 41 12 59
44 41 13 93
44 41 22
44 41 23
44 41 31
44 41 35
44 41 36 101
44 41 41
44 41 45
44 41 46 151
49
75
40
63
36
61
560
580
600C
132
117
109
15
36
60
108
11
24
33
16
42
64
98
12
31
48
36
55
85
26
43
67
29 28
41 39
95 91 90 84
118 114 112 104
20
28
58
73
30 28 21
47 44 35
83 78 71 55
141 129 125 121 112 100 77
236 232 225 210 193 174 134
12
20
29
41
71
21
36
51
77 72
142 141 125
16
27
38
54
94
11
20
27
40
69
34
41
46
25
34
41
46
25
41
46
46
51
25
41
46
46
51
780
780
780
780
780
820
820
800
800
800
800
870
800
800
800
800
900
1400
1400
1400
1500
1500
1500
1500
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
30
40
55
40
40
50
60
45
50
70
70
80
45
50
70
70
80
60
73
109
59
77
109
121
70
98
120
148
221
76
107
131
164
247
95
131
150
95
123
185
213
116
163
205
250
375
135
188
234
290
422
155
160
175
145
150
180
180
160
180
200
220
260
175
205
225
225
265
43
56
73
40
49
79
85
44
64
80
97
149
51
73
85
106
159
87
111
132
85
102
149
172
99
132
159
203
286
114
153
187
232
322
4-6
5-7
6-8
3-5
4-6
5-7
6-8
3-5
4-7
5-8
5-8
6-9
3-5
4-7
5-8
5-8
6-9
67
17
37
62
type 46
L
d3
EK
4. 41 11
4. 41 12
4. 41 13
4. 41 21
4. 41 22
4. 41 23
4. 41 24
4. 41 31
4. 41 32
4. 41 33
4. 41 34
4. 41 35
4. 41 41
4. 41 42
4. 41 43
4. 41 44
4. 41 45
139
81
26
44
18
38
63
580
type 48
L
d3
ER
type
93
28
48
560
d3
11.3
15
d1
type
144
100
250
350
49 41 13
49 41 14
49 41 25
49 41 35
49 41 45
25
47
59
90
91
23
40
53
84
83
22
37
43
72
79
35
61
71
32
57
66
57
64
55
60
560
34
41
580 600C
30
23
wt.
[kg]
303
403
453
503
503
280
300
400
400
400
260
241
273
300
300
450
480
535
550
550
100
200
250
300
300
33
44
47
63
63
type
4.34
Selection table
OD 419
Pipe clamps, clamp bases, OD 419 (ND 400), type 42, 43, 44, 46, 48, 49
type
d2
250
350
560
580
d2
wt.
[kg]
load
group
M24
260
70
9.7
3-5
d1
wt.
[kg]
load
group
16
24
16
24
435
435
500
500
100
100
100
100
23
23
24.5
25
1-3
3-6
1-3
3-6
600C
d3
wt.
[kg]
load
group
9.6
23
34
51
61
41
51
25
46
51
25
46
51
445
460
500
500
525
525
525
525
525
525
92
162
117
140
110
144
149
143
164
189
26
60
26
44
23
44
64
27
58
96
6-9
7-10
5-7
6-9
3-5
5-8
6-9
3-5
5-8
6-9
600C
42 42 19 8.0
6.2
4.4
Heat-resistant materials, see pp. 0.9 and 4.4
type
100
250
350
43 42 18
43 42 19
43 42 28
43 42 29
9.6
29
9.0
22
33
28
8.6
16
11.3
23
11.3
19
type
100
250
350
44 42 12 59
44 42 15 151
44 42 22
44 42 25
44 42 31
44 42 35
44 42 36
44 42 41
44 42 45
44 42 46 151
49
116
40
84
36
75
560
580
600C
11.3
15
d3
d1
100
type
type 46
L
EK
d3
type 48
L
ER
d3
144
4. 42 11
4. 42 12
4. 42 13
4. 42 21
4. 42 22
4. 42 23
4. 42 24
4. 42 31
4. 42 32
4. 42 33
4. 42 34
4. 42 35
4. 42 41
4. 42 42
4. 42 43
4. 42 44
4. 42 45
98
140
85
133
28
59
71
118
26
53
18
38
67
110
17
37
65
560
15
36
64
108
580
11
25
34
16
42
64
99
12
31
48
35
55
85
25
43
67
29 28
41 39
95 91 90 83
117 114 113 104
20
28
58
73
30 28 21
47 45 35
83 78 70 54
139 129 125 121 113 100 77
234 230 223 209 194 176 136
12
20
29
41
71
21
36
50
77 72
140 139 125
16
27
38
54
94
11
20
28
40
69
34
41
46
25
34
41
46
25
41
46
46
51
25
41
46
46
51
800
800
800
800
800
830
830
800
800
800
810
890
800
800
800
900
900
1400
1400
1400
1500
1500
1500
1500
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
30
40
55
40
40
50
60
45
50
70
70
80
45
50
70
70
80
62
75
112
61
78
103
125
72
96
122
152
228
78
106
134
175
252
94
131
162
97
124
184
214
118
166
204
261
381
137
185
237
293
427
155
160
175
145
150
180
180
160
180
200
220
260
175
205
225
225
265
44
58
75
41
50
80
87
44
64
81
99
153
51
73
86
116
160
88
112
132
85
103
155
173
99
133
160
204
287
114
154
187
224
323
4-6
5-7
6-8
3-5
4-6
5-7
6-8
3-5
4-7
5-8
5-8
6-9
3-5
4-7
5-8
5-8
6-9
4.35
type
100
250
350
49 42 13
49 42 14
49 42 25
49 42 35
49 42 45
37
47
61
91
92
32
40
53
85
85
24
37
43
72
80
35
61
72
32
57
67
57
65
55
61
560
34
42
580 600C
32
23
wt.
[kg]
310
410
460
510
510
300
300
400
400
400
241
241
273
300
300
420
480
535
555
555
100
200
250
300
300
31
44
48
64
64
Selection table
OD 457.2
Pipe clamps, clamp bases, OD 457.2 (ND 450), type 42, 43, 44, 46, 48, 49
560
580
d2
wt.
[kg]
load
group
M24
280
70
10.4
3-5
d1
wt.
[kg]
load
group
16
24
450
450
100
100
24
24
1-3
3-6
600C
d3
wt.
[kg]
load
group
9.1
17
34
47
51
51
61
41
51
51
25
46
51
51
25
46
51
51
470
470
480
540
540
540
560
560
560
560
560
560
560
560
112
113
162
96
122
136
102
135
149
209
143
145
189
229
30
36
62
24
36
46
25
40
66
114
29
44
96
145
6-9
7-9
7-10
5-7
6-9
6-9
3-5
5-8
6-9
6-9
3-5
5-8
6-9
6-9
600C
350
43 46 18
43 46 19
9.6
27
9.0
21
8.6
15
type
100
250
350
44 46 12 59
44 46 13 81
44 46 15 150
44 46 22
44 46 23
44 46 25
44 46 31
44 46 32
44 46 35
44 46 36 151
44 46 41
44 46 42
44 46 45
44 46 46 151
50
66
117
39
51
84
28
58
69
type
133
148
76
125
126
140
560
22
45
55
63
104
112
127
20
42
50
14
32
59
98
104
120
13
31
58
97
103
117
560
11
30
57
94
580
580
10
20
33
52
15
32
64
91
98
114
600C
12
24
47
66
26
35
73
89
36 34
59 55
139 133 132 119
156 152 150 138
24
40
85
98
50 46 35
58 53 42
123 112 101 78
275 252 244 236 227 203 156
298 285 276 267 257 233 181
20
22
41
83
94
36 27
41 31
72 54
157 145 109
201 199 163 123
20
22
40
80
90
34
41
46
51
34
41
46
51
41
46
46
51
61
41
46
46
51
61
770
820
850
850
800
800
930
930
900
900
900
930
980
900
900
900
1000
1000
1450
1450
1450
1450
1600
1600
1600
1600
1700
1700
1700
1700
1700
1700
1700
1700
1700
1700
35
40
50
60
45
50
55
55
50
50
60
70
85
50
50
60
70
85
71
76
131
138
81
103
160
172
117
132
184
298
333
128
142
197
318
357
112
125
173
214
131
170
262
298
184
206
287
456
513
211
242
326
528
577
150
155
170
185
160
170
185
200
180
190
225
245
250
195
210
235
295
295
47
59
86
86
50
69
113
123
75
81
116
175
204
86
92
125
205
228
97
109
143
156
107
141
210
232
147
158
224
331
366
171
185
254
387
416
4-6
5-7
6-8
6-9
4-6
5-7
6-8
7-9
4-7
5-8
5-8
6-9
7-10
4-7
5-8
5-8
6-9
7-10
type 46
L
d3
type 48
L
d3
144
type
100
250
350
49 46 13 37
49 46 14 75
49 46 25
49 46 35 100
49 46 45 105
32
57
55
94
95
24
41
44
80
90
36
68
81
33
64
75
64
74
62
70
560
39
48
580 600C
36
26
wt.
[kg]
329
429
479
529
529
350
350
400
400
400
241
260
292
324
324
485
500
535
555
555
100
200
250
300
300
36
49
51
68
69
4. 46 11
4. 46 12
4. 46 13
4. 46 14
4. 46 21
4. 46 22
4. 46 23
4. 46 24
4. 46 31
4. 46 32
4. 46 33
4. 46 34
4. 46 35
4. 46 41
4. 46 42
4. 46 43
4. 46 44
4. 46 45
87
145
EK
250
ER
100
type
42 46 19 7.5
5.8
4.1
Heat-resistant materials, see pp. 0.9 and 4.4
d2
350
d1
250
100
d3
type
4.36
Selection table
OD 508
Pipe clamps, clamp bases, OD 508 (ND 500), type 42, 44, 46, 48, 49
type
d2
E
d3
E
type 46
L
EK
d3
type 48
L
ER
d3
560
580
d2
wt.
[kg]
load
group
M24
305
70
11.4
3-5
600C
d3
wt.
[kg]
load
group
11
22
35
63
21
34
51
61
71
25
41
51
61
25
46
51
61
25
46
51
61
500
500
500
500
520
570
570
570
570
590
590
590
590
590
590
590
590
80
80
92
162
222
99
100
122
164
128
144
189
196
164
164
196
254
25
27
35
58
106
28
31
42
75
37
48
82
118
42
63
108
190
1-4
4-6
6-9
7-10
8-30
3-5
5-7
6-9
7-10
3-5
5-8
6-9
7-10
3-5
5-8
6-9
7-10
600C
250
350
44 51 14 10
44 51 15 28
44 51 16 57
44 51 17 98
44 51 18 189
44 51 25
44 51 26
44 51 27
44 51 28
44 51 35
44 51 36
44 51 37
44 51 38
44 51 45
44 51 46
44 51 47
44 51 48 222
8.9
24
48
81
158
7.5
19
37
65
125
16
30
59
117
4. 51 11
4. 51 12
4. 51 13
4. 51 14
4. 51 21
4. 51 22
4. 51 23
4. 51 24
4. 51 31
4. 51 32
4. 51 33
4. 51 34
4. 51 35
4. 51 41
4. 51 42
4. 51 43
4. 51 44
4. 51 45
155
222
147
217
13
23
47
100
140
202
12
22
42
90
17
35
81
131
189
16
34
80
122
186
560
14
33
68
98
580
11
23
35
52
19
40
65
113
164
15
30
48
84
34
41
46
51
34
41
46
61
41
46
46
51
61
41
46
46
51
61
860
860
900
900
920
920
1000
1050
1000
1000
1000
1030
1030
1000
1000
1000
1050
1050
1500
1500
1500
1500
1650
1650
1650
1650
1800
1800
1800
1800
1800
1800
1800
1800
1800
1800
35
40
60
65
50
60
60
60
60
70
80
80
90
60
70
80
80
90
86
94
151
173
104
122
182
235
139
154
208
324
393
151
169
230
363
429
123
150
193
234
153
192
295
335
208
234
327
512
601
238
270
380
589
687
160
175
175
180
170
180
200
220
200
200
230
265
300
210
225
250
315
315
60
71
97
101
67
77
129
148
85
97
136
199
248
97
111
149
243
275
111
133
159
182
130
151
231
259
162
181
252
375
456
188
209
287
435
499
4-6
5-7
6-8
6-9
4-6
5-7
6-8
7-10
4-7
5-8
5-8
6-9
7-10
4-7
5-8
5-8
6-9
7-10
350
100
type
173
250
42 51 19 6.9
5.4
3.8
Heat-resistant materials, see pp. 0.9 and 4.4
type
100
4.37
type
100
250
350
49 51 13 46
49 51 14 84
49 51 25
49 51 35 129
49 51 45 148
40
66
62
125
135
29
49
61
107
129
54
90
116
50
85
108
84
107
81
99
560
48
68
580 600C
52
38
wt.
[kg]
354
454
554
554
554
350
350
400
395
400
241
280
330
330
330
500
500
550
565
580
100
200
300
300
300
42
52
70
81
87
Selection table
OD 558.8
Pipe clamps, clamp bases, OD 558.8 (ND 550), type 42, 44, 46, 48, 49
560
580
d2
wt.
[kg]
load
group
M30
350
90
24
5-6
600C
d3
wt.
[kg]
load
group
23
35
47
63
34
46
51
61
71
34
51
51
61
46
51
61
61
46
51
61
61
530
530
530
530
545
600
600
600
600
620
620
620
620
620
620
620
620
85
107
113
162
222
100
122
132
164
138
189
196
229
164
196
216
254
31
36
44
60
110
33
46
49
80
51
89
121
166
68
121
152
211
3-6
5-8
6-9
7-10
8-30
4-6
6-9
6-9
7-10
5-8
6-9
7-10
7-10
5-8
6-9
7-10
7-10
600C
100
250
350
44 56 14
44 56 15
44 56 16
44 56 17
44 56 18
44 56 25
44 56 26
44 56 27
44 56 28
44 56 35
44 56 36
44 56 37
44 56 38
44 56 45
44 56 46
44 56 47
44 56 48
20
45
75
101
182
17
38
60
84
151
15
29
45
67
120
24
59
69
116
type
222
137
175
222
130
166
222
19
47
55
99
124
158
211
18
43
51
90
35
83
120
150
194
34
82
119
149
188
560
33
68
98
126
580
25
35
52
83
40
65
86
115
167
31
48
66
85
34
41
51
51
34
41
51
51
41
46
46
51
61
41
46
46
51
61
820
880
920
930
960
960
1100
1100
1100
1100
1100
1100
1180
1100
1100
1100
1100
1200
1550
1550
1550
1550
1700
1700
1700
1700
1900
1900
1900
1900
1900
1900
1900
1900
1900
1900
40
50
60
65
55
60
65
65
60
60
70
90
100
60
60
70
90
100
84
111
164
206
117
137
233
282
168
204
239
368
506
186
229
266
411
567
130
162
227
283
171
203
323
405
254
324
360
563
746
289
348
419
654
860
170
185
195
205
180
190
205
240
200
230
240
270
320
225
220
260
285
360
61
76
101
118
74
83
147
182
107
130
148
224
321
122
140
171
246
359
117
128
177
237
140
159
247
306
191
235
271
422
553
224
265
318
470
623
4-6
5-7
6-9
7-9
4-6
5-7
6-9
7-9
4-7
5-8
5-8
6-9
7-10
4-7
5-8
5-8
6-9
7-10
type 46
L
d3
type 48
L
d3
173
type
100
250
350
49 56 13 55
49 56 14 107
49 56 25
49 56 35 161
49 56 45 174
44
84
70
147
150
32
62
66
127
142
56
105
128
52
99
119
97
111
91
107
560
55
73
580 600C
55
40
wt.
[kg]
380
480
580
580
580
400
395
450
450
450
241
292
343
350
350
570
585
620
635
650
100
200
300
300
300
71
89
100
116
120
4. 56 11
4. 56 12
4. 56 13
4. 56 14
4. 56 21
4. 56 22
4. 56 23
4. 56 24
4. 56 31
4. 56 32
4. 56 33
4. 56 34
4. 56 35
4. 56 41
4. 56 42
4. 56 43
4. 56 44
4. 56 45
200
EK
type
42 56 19 17
13
9.9
Heat-resistant materials, see pp. 0.9 and 4.4
ER
350
250
d2
100
d3
type
4.38
Selection table
OD 609.6
Pipe clamps, clamp bases, OD 609.6 (ND 600), type 42, 44, 46, 48, 49
type
d2
E
E
type 46
L
EK
d3
type 48
L
ER
d3
560
580
d2
wt.
[kg]
load
group
M30
375
90
26
5-6
600C
d3
wt.
[kg]
load
group
21
34
59
77
34
51
51
61
71
41
51
61
61
46
51
61
71
46
51
61
71
560
560
560
560
580
645
645
645
645
685
685
685
685
685
685
685
685
115
98
119
162
222
120
122
143
164
164
189
209
229
182
196
260
254
37
44
50
66
114
43
49
75
86
62
100
142
182
76
119
214
244
3-6
6-9
6-9
7-10
8-30
4-7
6-9
7-10
7-10
5-8
6-9
7-10
8-30
5-8
6-9
7-10
8-30
600C
100
250
350
44 61 14
44 61 15
44 61 16
44 61 17
44 61 18
44 61 25
44 61 26
44 61 27
44 61 28
44 61 35
44 61 36
44 61 37
44 61 38
44 61 45
44 61 46
44 61 47
44 61 48
29
56
80
110
195
24
45
69
87
159
21
38
50
74
125
23
55
86
110
4. 61 11
4. 61 12
4. 61 13
4. 61 14
4. 61 15
4. 61 21
4. 61 22
4. 61 23
4. 61 24
4. 61 31
4. 61 32
4. 61 33
4. 61 34
4. 61 35
4. 61 36
4. 61 41
4. 61 42
4. 61 43
4. 61 44
4. 61 45
4. 61 46
268
340
128
248
305
122
215
291
22
43
71
92
116
179
263
21
39
67
85
38
78
110
169
247
37
77
108
165
243
560
36
66
91
137
25
35
52
82
39
64
106
142
141
219
580
29
47
81
103
53 41 22
90 70 40
123 96 53
198 152 80
306 235 125
375 288 156
39 30 22
71 54 40
96 72 53
141 106 78
256 217 162 120
306 303 272 205 150
41
46
51
51
61
41
51
51
61
41
46
46
51
61
71
41
46
46
51
61
71
1000
1000
1000
1000
1000
1010
1060
1090
1110
1200
1200
1200
1210
1240
1260
1200
1200
1200
1300
1300
1300
1600
1600
1600
1600
1600
1800
1800
1800
1800
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
40
45
50
55
65
60
60
60
70
60
70
90
90
110
110
60
70
90
90
110
110
122 165
151 199
176 244
217 293
275 340
155 231
252 362
310 477
381 540
191 266
274 398
324 469
417 613
565 820
677 962
211 316
302 463
365 541
486 708
646 952
766 1127
185
195
190
205
230
190
220
235
265
220
235
280
285
325
360
230
275
280
295
355
365
87
108
115
130
142
105
150
188
231
125
172
202
264
357
433
135
197
233
298
403
482
150
184
191
242
280
190
273
336
397
217
299
347
467
609
718
242
350
409
515
683
793
4-7
6-8
6-9
7-9
7-10
4-7
6-9
7-9
8-10
4-7
5-8
5-8
6-9
7-10
8-30
4-7
5-8
5-8
6-9
7-10
8-30
350
type
type
199
250
42 61 19 16
13
9.3
Heat-resistant materials, see pp. 0.9 and 4.4
d3
100
4.39
type
100
250
350
49 61 13 76
49 61 14 117
49 61 25
49 61 35 172
49 61 45 202
74
88
73
152
173
54
64
70
131
165
64
108
148
59
102
138
99
125
94
121
560
59
83
580 600C
62
45
wt.
[kg]
455
505
605
605
605
400
395
450
450
450
273
311
362
370
370
570
585
620
635
650
150
200
300
300
300
80
95
108
122
128
Selection table
OD 660.4
Pipe clamps, clamp bases, OD 660.4 (ND 650), type 42, 44, 46, 48, 49
250
350
15
12
8.8
type
100
250
350
44 66 14
44 66 15
44 66 16
44 66 17
44 66 18
44 66 19
44 66 25
44 66 26
44 66 27
44 66 28
44 66 35
44 66 36
44 66 37
44 66 38
44 66 45
44 66 46
44 66 47
44 66 48
34
58
86
130
183
306
28
47
71
106
145
241
24
36
57
85
116
174
22
61
101
169
560
580
d2
wt.
[kg]
load
group
M30
400
90
28
5-6
600C
d3
wt.
[kg]
load
group
22
44
60
78
41
51
51
61
71
71
41
51
61
71
46
51
61
71
46
51
61
71
610
610
610
610
610
635
680
680
680
680
700
700
700
700
700
700
700
700
115
113
162
162
210
229
120
132
158
196
164
196
209
229
164
216
260
254
41
48
66
79
118
172
44
55
83
135
65
127
146
191
79
160
222
250
4-7
6-9
6-9
7-10
8-30
9-30
4-7
6-9
7-10
8-30
5-8
6-9
7-10
8-30
5-8
6-9
7-10
8-30
600C
42 66 19
d2
type 100
340
260
312
226
298
188
270
253
39
79
112
173
160
249
38
77
96
139
25
52
53
83
39
78
112
142
153
222
30
60
84
105
Heat-resistant materials,
see pp. 0.9 and 4.4
20
44
76
134
40
80
113
175
580
d3
22
48
83
142
560
60
90
139
202
308
378
47 25
70 40
107 57
155 82
237 125
291 155
45 33 24
72 54 40
100 74 54
146 110 80
262 218 164 120
329 321 272 204 150
1030
1050
1050
1050
1050
1120
1250
1250
1280
1250
1250
1250
1250
1320
1320
1250
1250
1250
1250
1350
1350
1650
1650
1650
1650
1650
1900
1900
1900
1900
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
2050
40
50
55
60
70
65
65
70
80
65
65
90
90
100
110
65
65
90
90
100
110
103
127
137
170
185
133
191
232
281
150
190
233
296
391
467
168
221
263
334
433
518
173
210
218
291
303
237
312
385
453
260
328
401
504
643
759
295
386
461
562
726
834
5-7
6-8
6-9
7-10
8-10
4-7
6-9
7-9
8-10
4-7
5-8
5-8
6-9
7-10
8-30
4-7
5-8
5-8
6-9
7-10
8-30
type 46
L
d3
EK
41
46
51
61
61
41
51
51
61
41
46
46
51
61
71
41
46
46
51
61
71
type 48
L
d3
224
type
100
250
350
49 66 13
49 66 14
49 66 25
49 66 35
49 66 45
89
122
113
167
226
76
96
99
161
194
56
71
81
160
185
66
128
166
61
120
154
116
145
103
139
560
72
96
580 600C
72
53
wt.
[kg]
480
530
630
630
630
400
395
450
450
450
300
330
370
381
381
570
585
620
650
650
150
200
300
300
300
86
101
113
134
136
60 46 36
90 71 56
136 102 81
217 159 126
257 196 155
66 63 45
118 111 80
195 192 176 125
256 246 243 223 158
61
91
155
273 250 242 234 225
399 362 350 340 337
488 474 460 439 421
ER
type
4. 66 11
4. 66 12
4. 66 13
4. 66 14
4. 66 15
4. 66 21
4. 66 22
4. 66 23
4. 66 24
4. 66 31
4. 66 32
4. 66 33
4. 66 34
4. 66 35
4. 66 36
4. 66 41
4. 66 42
4. 66 43
4. 66 44
4. 66 45
4. 66 46
281
4.40
Selection table
OD 711.2
Pipe clamps, clamp bases, OD 711.2 (ND 700), type 42, 44, 46, 48, 49
type 100
250
350
42 71 19
14
11
8.1
type
100
250
350
44 71 14
44 71 15
44 71 16
44 71 17
44 71 18
44 71 19
44 71 25
44 71 26
44 71 27
44 71 28
44 71 29
44 71 35
44 71 36
44 71 37
44 71 38
44 71 39
44 71 45
44 71 46
44 71 47
44 71 48
42
95
125
152
188
307
35
76
102
121
145
243
30
63
83
88
115
176
33
56
78
118
168
d2
d3
Heat-resistant materials,
see pp. 0.9 and 4.4
type
type 46
L
EK
d3
type 48
L
ER
d3
224
235
316
298
205
274
285
560
26
44
68
98
141
24
41
62
88
132
40
72
109
160
215
170
229
258
242
39
71
108
157
210
238
560
38
67
92
138
175
25
35
52
82
91
42
90
115
143
221
580
580
d2
wt.
[kg]
load
group
M30
430
90
30
5-6
600C
d3
wt.
[kg]
load
group
23
47
63
78
41
51
61
71
71
71
41
51
61
71
71
46
51
61
71
71
46
51
61
71
630
630
630
630
630
650
720
720
720
720
720
740
740
740
740
740
740
740
740
740
143
162
168
181
222
235
122
138
149
164
196
164
189
209
229
267
189
229
276
254
58
71
82
99
133
187
51
63
88
100
143
72
108
156
198
257
95
180
243
262
4-7
6-9
7-10
8-30
8-30
9-30
5-7
6-9
7-10
8-30
8-30
5-8
6-9
7-10
8-30
9-30
5-8
6-9
7-10
8-30
600C
32
66
85
105
60
90
158
202
307
394
46 27
70 40
121 64
155 82
236 125
303 162
49 37 27
72 54 40
115 86 63
145 109 80
228 217 163 120
338 335 283 213 155
41
46
51
51
61
46
51
51
61
41
46
51
51
61
71
41
46
51
51
61
71
1030
1080
1080
1090
1090
1200
1210
1320
1350
1300
1300
1300
1310
1390
1450
1300
1300
1300
1400
1400
1450
1700
1700
1700
1700
1700
2000
2000
2000
2000
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
45
55
60
80
90
70
70
70
90
70
70
100
100
100
130
70
70
100
100
100
130
124
147
160
191
214
152
195
276
309
163
203
268
313
432
522
186
236
297
375
462
578
197
231
293
309
337
266
341
441
488
278
342
441
524
676
780
317
402
513
583
733
879
5-7
6-8
7-9
7-9
8-10
5-8
6-9
7-9
8-10
4-7
5-8
6-9
6-9
7-10
8-30
4-7
5-8
6-9
6-9
7-10
8-30
4. 71 11
4. 71 12
4. 71 13
4. 71 14
4. 71 15
4. 71 21
4. 71 22
4. 71 23
4. 71 24
4. 71 31
4. 71 32
4. 71 33
4. 71 34
4. 71 35
4. 71 36
4. 71 41
4. 71 42
4. 71 43
4. 71 44
4. 71 45
4. 71 46
340
4.41
type
100
250
350
49 71 13
49 71 14
49 71 25
49 71 35
49 71 45
95
135
118
203
253
79
106
114
195
218
58
78
100
188
207
82
157
186
76
147
173
135
167
120
160
560
82
111
580 600C
83
61
wt.
[kg]
506
556
656
656
656
400
395
450
450
450
320
350
394
413
413
570
585
635
650
650
150
200
300
300
300
92
107
129
147
147
Pipe clamps, clamp bases, OD 762 (ND 750), type 42, 44, 46, 48, 49
10
7.7
type
100
250
350
44 76 14
44 76 15
44 76 16
44 76 17
44 76 18
44 76 19
44 76 25
44 76 26
44 76 27
44 76 28
44 76 29
44 76 35
44 76 36
44 76 37
44 76 38
44 76 39
44 76 45
44 76 46
44 76 47
44 76 48
44 76 49
54
83
120
151
196
308
45
67
95
116
151
239
37
53
76
87
120
174
54
76
117
156
242
type
340
284
340
338
340
43
64
97
121
192
40
59
88
113
176
40
71
108
158
266
284
340
340
39
70
106
156
261
340
560
38
67
91
139
202
26
35
52
83
106
50
90
115
143
195
223
309
580
38
66
85
106
146
wt.
[kg]
load
group
M30
455
90
31
5-6
600C
d3
wt.
[kg]
load
group
28
47
63
78
108
41
51
61
71
71
71
51
61
71
71
71
46
51
61
71
71
46
51
61
71
71
670
670
670
670
670
690
760
760
760
760
760
770
770
770
770
770
770
770
770
770
770
156
162
168
181
222
235
138
149
164
196
218
171
189
209
225
260
196
218
276
260
279
72
73
84
102
133
188
67
91
112
148
206
86
122
163
220
297
133
189
253
285
375
4-7
6-9
7-10
8-30
8-30
9-30
6-9
7-10
8-30
8-30
9-30
5-8
6-9
7-10
8-30
9-30
5-8
6-9
7-10
8-30
9-30
69
90
140
202
306
461
53 30
70 40
109 60
155 83
236 125
354 188
54 41 30
72 54 40
108 82 60
145 109 80
253 219 163 120
385 382 326 246 179
41
46
51
51
61
46
51
51
61
41
46
51
51
61
71
41
46
51
51
61
71
1120
1120
1150
1150
1150
1400
1400
1420
1490
1500
1500
1500
1500
1500
1580
1500
1500
1500
1500
1500
1600
1750
1750
1750
1750
1750
2200
2200
2200
2200
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
2300
145 218
161 257
187 314
216 343
256 394
190 316
242 403
316 516
396 621
210 342
254 402
313 502
386 616
495 796
695 1023
243 393
286 469
361 590
437 706
538 881
751 1152
5-7
6-8
7-9
7-9
8-10
5-8
6-9
7-9
8-10
4-7
5-8
6-9
6-9
7-10
8-30
4-7
5-8
6-9
6-9
7-10
8-30
Heat-resistant materials,
see pp. 0.9 and 4.4
type 46
L
d3
type 48
L
d3
250
type
100
250
350
49 76 13
49 76 14
49 76 25
49 76 35
49 76 45
111
157
151
274
291
96
124
144
238
250
71
91
114
217
238
94
182
214
87
171
199
165
193
147
186
560
104
128
580 600C
96
70
wt.
[kg]
531
581
681
681
681
400
395
445
450
450
343
370
400
420
420
590
585
635
650
650
150
200
300
300
300
104
115
136
157
157
4. 76 11
4. 76 12
4. 76 13
4. 76 14
4. 76 15
4. 76 21
4. 76 22
4. 76 23
4. 76 24
4. 76 31
4. 76 32
4. 76 33
4. 76 34
4. 76 35
4. 76 36
4. 76 41
4. 76 42
4. 76 43
4. 76 44
4. 76 45
4. 76 46
307
d2
600C
EK
13
580
42 76 19
560
350
d2
250
d3
type 100
ER
Selection table
OD 762
4.42
Selection table
OD 812.8
Pipe clamps, clamp bases, OD 812.8 (ND 800), type 42, 44, 46, 48, 49
type 100
250
350
42 81 19
13
10
7.4
type
100
250
350
44 81 14
44 81 15
44 81 16
44 81 17
44 81 18
44 81 19
44 81 25
44 81 26
44 81 27
44 81 28
44 81 29
44 81 35
44 81 36
44 81 37
44 81 38
44 81 39
44 81 45
44 81 46
44 81 47
44 81 48
54
89
122
154
208
308
44
71
98
119
168
239
37
57
79
87
125
174
55
77
119
164
248
d2
d3
Heat-resistant materials,
see pp. 0.9 and 4.4
type
type 46
L
EK
d3
type 48
L
ER
d3
250
340
292
340
336
340
560
43
65
100
127
196
40
59
87
119
180
69
104
150
159
259
280
340
339
68
103
149
158
258
334
560
67
86
138
153
201
35
52
83
89
105
85
114
142
197
218
310
580
580
65
84
105
146
d2
wt.
[kg]
load
group
M30
480
90
33
5-6
600C
d3
wt.
[kg]
load
group
47
63
78
108
41
51
61
71
71
71
51
61
71
71
71
51
61
71
71
71
51
61
71
71
700
700
700
700
700
720
790
790
790
790
790
810
810
810
810
810
810
810
810
810
156
162
168
181
222
235
138
149
171
196
218
189
209
225
276
260
218
283
260
286
76
78
90
109
149
198
72
98
120
153
218
121
173
231
264
312
197
263
300
410
4-7
6-9
7-10
8-30
8-30
9-30
6-9
7-10
8-30
8-30
9-30
6-9
7-10
8-30
8-30
9-30
6-9
7-10
8-30
9-30
600C
68 55
102 81
156 123
208 165
250 198
74 70 50
117 111 80
226 219 207 145
332 319 315 289 204
81
104
149
228 220
400 363 351 341 338
662 606 587 568 556
80
102
140
198
306
502
62 34
80 46
109 60
152 81
236 125
386 207
60 45 34
82 62 46
108 81 60
147 108 80
250 219 163 120
398 394 365 273 200
46
51
61
61
71
46
51
61
71
46
46
51
51
61
71
46
46
51
51
61
71
1200
1200
1200
1200
1200
1500
1500
1560
1560
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
1800
1800
1800
1800
1800
2300
2300
2300
2300
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
162 266
177 279
224 338
257 392
281 448
209 338
271 438
386 597
449 717
261 398
295 461
343 537
420 654
540 854
773 1153
282 447
335 532
394 628
477 761
591 947
818 1322
5-8
6-9
7-10
8-10
9-30
5-8
6-9
7-10
8-30
5-8
5-8
6-9
6-9
7-10
8-30
5-8
5-8
6-9
6-9
7-10
8-30
4. 81 11
4. 81 12
4. 81 13
4. 81 14
4. 81 15
4. 81 21
4. 81 22
4. 81 23
4. 81 24
4. 81 31
4. 81 32
4. 81 33
4. 81 34
4. 81 35
4. 81 36
4. 81 41
4. 81 42
4. 81 43
4. 81 44
4. 81 45
4. 81 46
307
4.43
type
100
250
350
49 81 13
49 81 14
49 81 25
49 81 35
49 81 45
118
162
158
280
350
102
128
152
243
301
74
94
130
218
286
108
184
257
100
173
240
168
232
150
210
560
106
154
580 600C
116
85
wt.
[kg]
556
606
706
706
706
400
395
445
450
445
362
400
425
425
425
590
585
635
650
650
150
200
300
300
300
109
122
145
161
167
Selection table
OD 863.6
Pipe clamps, clamp bases, OD 863.6 (ND 850), type 42, 44, 46, 48, 49
250
350
13
10
7.2
type
100
250
350
44 86 14
44 86 15
44 86 16
44 86 17
44 86 18
44 86 19
44 86 25
44 86 26
44 86 27
44 86 28
44 86 29
44 86 35
44 86 36
44 86 37
44 86 38
44 86 46
44 86 47
44 86 48
51
88
151
208
300
308
42
70
119
173
221
238
36
59
87
125
176
172
78
119
168
188
254
580
d2
wt.
[kg]
load
group
M30
504
100
37
5-6
600C
d3
wt.
[kg]
load
group
60
78
108
41
51
61
71
71
71
51
71
71
71
71
61
71
71
71
61
71
71
735
735
735
735
735
760
815
815
815
815
815
845
845
845
845
845
845
845
171
162
203
222
248
229
149
171
198
218
218
210
225
276
270
276
276
286
81
86
117
161
215
215
101
124
169
223
233
191
248
300
319
294
334
441
4-7
6-9
7-10
8-30
8-30
9-30
7-9
8-30
8-30
8-30
9-30
7-10
8-30
8-30
9-30
7-10
8-30
9-30
600C
42 86 19
560
d2
type 100
340
340
333
340
280
340
340
101
150
185
260
87
138
175
200
335
216
308
52
82
91
104
109
142
197
84
105
146
Heat-resistant materials,
see pp. 0.9 and 4.4
d3
60
87
125
136
184
102
151
187
263
580
296
65
100
137
149
201
560
80
100
140
197
306
504
62 34
80 46
109 60
152 80
235 124
388 206
60 45 34
81 61 46
106 80 60
143 108 80
212 211 162 120
373 359 272 200
46
51
61
61
71
46
51
61
71
46
46
51
51
61
71
46
46
51
51
61
71
1230
1230
1250
1250
1250
1550
1550
1550
1550
1650
1650
1650
1650
1650
1650
1650
1650
1650
1650
1650
1650
1850
1850
1850
1850
1850
2350
2350
2350
2350
2450
2450
2450
2450
2450
2450
2450
2450
2450
2450
2450
2450
176 296
198 310
235 376
260 437
283 466
225 366
295 469
376 596
469 745
270 417
317 490
371 576
450 695
580 903
786 1214
303 477
351 556
422 665
486 770
625 996
872 1375
5-8
6-9
7-10
8-10
9-30
5-8
6-9
7-10
8-30
5-8
5-8
6-9
6-9
7-10
8-30
5-8
5-8
6-9
6-9
7-10
8-30
type 46
L
d3
type 48
L
d3
279
type
100
250
350
49 86 13
49 86 14
49 86 25
49 86 35
49 86 45
136
242
203
411
553
115
190
176
355
406
84
154
153
305
460
139
252
414
129
238
353
233
320
209
283
560
148
199
580 600C
156
117
wt.
[kg]
582
632
732
732
732
450
445
495
495
495
360
420
451
480
485
650
660
715
715
755
150
200
300
300
300
126
145
176
200
232
70 55
101 80
156 124
208 165
248 196
73 70 50
116 110 80
226 218 181 146
331 318 314 262 204
83
101
153
224 218
397 361 349 340 337
661 605 586 567 555
EK
90
135
202
273
319
ER
type
4. 86 11
4. 86 12
4. 86 13
4. 86 14
4. 86 15
4. 86 21
4. 86 22
4. 86 23
4. 86 24
4. 86 31
4. 86 32
4. 86 33
4. 86 34
4. 86 35
4. 86 36
4. 86 41
4. 86 42
4. 86 43
4. 86 44
4. 86 45
4. 86 46
307
4.44
Selection table
OD 914.4
Pipe clamps, clamp bases, OD 914.4 (ND 900), type 42, 44, 46, 48, 49
type 100
250
350
42 91 19
13
10
7.6
type
100
250
350
44 91 14
44 91 15
44 91 16
44 91 17
44 91 18
44 91 19
44 91 25
44 91 26
44 91 27
44 91 28
44 91 29
44 91 35
44 91 36
44 91 37
44 91 38
44 91 46
44 91 47
44 91 48
51
88
153
208
254
308
43
70
117
170
209
238
36
56
87
125
167
172
78
120
169
188
255
560
580
d2
wt.
[kg]
load
group
M30
530
100
40
5-6
600C
d3
wt.
[kg]
load
group
63
78
108
41
51
61
71
71
71
51
71
71
71
71
61
71
71
71
61
71
71
760
760
760
760
760
785
840
840
840
840
840
870
870
870
870
870
870
870
156
162
201
222
229
235
149
171
196
218
218
209
225
276
260
283
260
286
83
86
120
163
220
220
107
133
168
224
238
191
251
289
340
293
330
439
4-7
6-9
7-10
8-30
8-30
9-30
7-9
8-30
8-30
9-30
9-30
7-10
8-30
9-30
9-30
7-10
8-30
9-30
600C
d2
d3
Heat-resistant materials,
see pp. 0.9 and 4.4
type
type 46
L
EK
d3
type 48
L
ER
d3
279
340
297
340
329
340
65
101
133
149
201
60
88
125
136
184
102
152
186
255
274
340
340
101
150
184
252
85
139
170
202
335
218
308
560
52
83
90
105
115
143
198
580
85
105
146
72 57
102 81
158 125
210 167
249 197
84
122
215 208
317 305 301
387 371 367
81 60
117 85
197 140
275 200
332 240
91
140
203
444 424 410 399 395
680 630 610 590 576
680 680 680 680 676
90
139
185
360
518
608
70 40
109 60
145 80
277 147
398 214
468 252
72
109
145
260 255
410 364
476 468 438
54 40
81 60
110 80
192 140
272 200
330 240
46
51
61
61
71
46
51
61
71
71
46
46
51
61
71
71
46
46
51
61
71
71
1300
1300
1300
1300
1300
1600
1600
1600
1600
1600
1700
1700
1700
1700
1760
1780
1700
1700
1700
1700
1800
1800
1900
1900
1900
1900
1900
2400
2400
2400
2400
2400
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
2500
50
60
70
90
100
80
90
100
100
110
100
110
110
130
130
160
100
110
110
130
130
160
262
309
442
556
616
383
487
666
862
930
500
636
771
1152
1532
1750
547
692
851
1216
1581
1776
320
379
514
618
704
514
643
861
1105
1278
645
828
1021
1500
1945
2116
737
942
1154
1655
2091
2393
255 204
240 214
240 263
265 305
295 339
250 272
270 316
300 414
325 482
345 562
300 314
330 390
350 469
385 691
455 913
440 998
300 342
345 443
370 544
445 764
445 946
490 1109
310
329
407
471
537
407
498
639
756
876
479
594
718
1035
1291
1447
537
694
849
1136
1451
1642
5-8
6-9
7-10
8-10
9-30
5-8
6-9
7-10
8-30
9-30
5-8
5-8
6-9
7-10
8-30
9-30
5-8
5-8
6-9
7-10
8-30
9-30
wt.
[kg]
607
657
757
757
757
450
450
500
500
495
362
420
451
483
483
650
660
715
715
755
150
200
300
300
300
129
149
180
203
236
4. 91 11
4. 91 12
4. 91 13
4. 91 14
4. 91 15
4. 91 21
4. 91 22
4. 91 23
4. 91 24
4. 91 25
4. 91 31
4. 91 32
4. 91 33
4. 91 34
4. 91 35
4. 91 36
4. 91 41
4. 91 42
4. 91 43
4. 91 44
4. 91 45
4. 91 46
307
4.45
type
100
250
350
49 91 13
49 91 14
49 91 25
49 91 35
49 91 45
137
249
203
397
559
116
193
176
346
486
85
157
153
309
466
140
255
419
130
240
356
236
323
209
285
560
148
201
580 600C
156
118
Selection table
OD 965.2
Pipe clamps, clamp bases, OD 965.2 (ND 950), type 42, 44, 46, 48, 49
13
10
7.4
type
100
250
350
44 97 14
44 97 15
44 97 16
44 97 17
44 97 18
44 97 19
44 97 25
44 97 26
44 97 27
44 97 28
44 97 29
44 97 35
44 97 36
44 97 37
44 97 38
44 97 39
44 97 46
44 97 47
44 97 48
51
89
149
208
299
366
43
71
119
173
233
295
36
60
87
126
175
215
85
123
171
246
299
346
340
311
340
97
126
178
227
101
148
188
201
241
259
340
340
99
146
185
199
238
560
85
140
170
192
232
335
d2
wt.
[kg]
load
group
M30
554
100
41
5-6
600C
d3
wt.
[kg]
load
group
61
78
108
41
51
61
71
71
81
51
71
71
71
81
61
71
71
71
71
61
71
71
785
785
785
800
800
820
865
865
865
865
880
900
900
900
900
900
900
900
900
171
162
203
222
248
276
182
189
210
218
255
210
225
270
276
286
276
276
286
89
94
130
179
241
309
118
144
193
246
317
200
265
304
352
464
307
349
463
4-7
6-9
7-10
8-30
9-30
10-40
7-9
8-30
8-30
9-30
10-40
7-10
8-30
8-30
9-30
9-30
7-10
8-30
9-30
600C
52
83
91
105
155
107
143
198
305
580
83
106
147
Heat-resistant materials,
see pp. 0.9 and 4.4
type
100
250
350
49 97 13
49 97 14
49 97 25
49 97 35
49 97 45
139
249
264
414
581
118
197
225
358
500
87
160
178
308
475
80
114
181
250
345
441
383
680 626 606 586
680 680 680 680
760 760 742 715
60
85
143
200
280
360
90
139
201
380
574
673
689
89
139
185
359
520
612
684
70
109
145
276
400
471
570
40
60
80
147
213
250
310
71
106
140
252
385 368
472 422
586 581 557
53
80
106
189
270
318
419
146
255
427
136
240
386
237
339
231
300
40
60
80
140
200
239
310
46
51
61
61
71
81
46
51
61
71
71
81
46
46
51
61
71
71
81
46
46
51
61
71
71
71
1350
1400
1400
1400
1400
1400
1650
1650
1650
1650
1650
1700
1750
1750
1750
1750
1770
1770
1770
1750
1750
1750
1750
1750
1750
1780
2000
2000
2000
2000
2000
2000
2450
2450
2450
2450
2450
2450
2550
2550
2550
2550
2550
2550
2550
2550
2550
2550
2550
2550
2550
2550
50
60
70
90
100
100
80
90
100
100
110
110
100
110
110
130
130
160
160
100
110
110
130
130
160
160
285
338
437
542
745
863
417
523
703
858
1037
1244
511
639
764
1174
1556
1805
1897
586
746
875
1249
1599
1807
2166
347
419
546
643
825
995
554
696
888
1114
1399
1647
659
842
1002
1539
2000
2257
2506
777
990
1166
1679
2152
2433
2914
295
300
315
330
330
370
305
345
375
405
450
460
330
345
395
430
465
485
520
300
345
370
445
445
490
490
267
300
304
349
406
455
312
351
438
540
670
813
336
429
519
761
1022
1060
1164
373
471
552
815
970
1121
1290
363 5-8
389 6-9
450 7-10
536 8-10
602 9-30
690 10-40
442 5-8
546 6-9
670 7-10
831 8-30
1019 9-30
1203 10-40
509 5-8
647 5-8
777 6-9
1097 7-10
1377 8-30
1542 9-30
1733 10-40
589 5-8
727 5-8
858 6-9
1249 7-10
1500 8-30
1734 9-30
1966 9-30
wt.
[kg]
633
683
783
783
783
450
445
500
500
500
400
460
490
520
520
650
660
715
715
755
150
200
300
300
300
137
159
191
214
249
type 46
L
d3
EK
72
101
160
209
287
370
type 48
L
d3
ER
96
134
216
278
383
492
330
4. 97 11
4. 97 12
4. 97 13
4. 97 14
4. 97 15
4. 97 16
4. 97 21
4. 97 22
4. 97 23
4. 97 24
4. 97 25
4. 97 26
4. 97 31
4. 97 32
4. 97 33
4. 97 34
4. 97 35
4. 97 36
4. 97 37
4. 97 41
4. 97 42
4. 97 43
4. 97 44
4. 97 45
4. 97 46
4. 97 47
type
380
103
137
193
247
580
42 97 19
560
350
d2
250
d3
type 100
560
163
212
580 600C
165
125
4.46
Selection table
OD 1016
Pipe clamps, clamp bases, OD 1016 (ND 1000), type 42, 44, 46, 48, 49
type 100
d2
31
350
23
16
42 T0 19
250
d3
Heat-resistant materials,
see pp. 0.9 and 4.4
type
100
250
350
44 T0 14
44 T0 15
44 T0 16
44 T0 17
44 T0 18
44 T0 19
44 T0 24
44 T0 25
44 T0 26
44 T0 27
44 T0 28
44 T0 29
44 T0 35
44 T0 36
44 T0 37
44 T0 38
44 T0 39
44 T0 46
44 T0 47
44 T0 48
92
149
208
288
373
405
73
120
173
230
295
359
60
87
125
174
212
259
87
123
171
249
299
343
type
type 46
L
EK
d3
type 48
L
ER
d3
330
4.47
4. T0 11
4. T0 12
4. T0 13
4. T0 14
4. T0 15
4. T0 16
4. T0 21
4. T0 22
4. T0 23
4. T0 24
4. T0 25
4. T0 26
4. T0 31
4. T0 32
4. T0 33
4. T0 34
4. T0 35
4. T0 36
4. T0 37
4. T0 41
4. T0 42
4. T0 43
4. T0 44
4. T0 45
4. T0 46
4. T0 47
380
380
340
560
69
103
137
197
242
280
63
97
125
180
222
258
99
146
188
199
242
340
333
98
144
185
197
239
328
560
84
139
170
192
232
52
83
91
105
155
107
143
198
304
580
580
82
106
147
d2
wt.
[kg]
load
group
M30
592
150
85
5-6
600C
d3
wt.
[kg]
load
group
61
78
108
51
61
71
71
81
91
51
71
71
71
81
81
61
71
71
71
71
61
71
71
810
810
850
850
860
915
890
890
890
890
910
910
930
930
930
930
930
930
930
930
162
203
222
248
276
276
182
189
210
218
276
283
210
225
270
276
286
255
276
286
97
137
184
252
323
370
123
150
198
254
326
376
205
274
311
361
478
315
359
476
6-9
7-10
8-30
9-30
10-40
20-50
7-9
8-30
8-30
9-30
10-40
10-40
7-10
8-30
8-30
9-30
9-30
7-10
8-30
9-30
600C
72
101
159
235
351
459
57
80
126
187
279
364
86
119
208
303
436 427
562 541 512
81
114
181
253
360
416
60
84
141
200
285
390
91
141
188
388
680 627 608 588 574
680 680 680 680 676
760 760 760 760 760
type
100
250
350
49 T0 13
49 T0 14
49 T0 25
49 T0 35
49 T0 45
175
299
295
414
583
133
221
251
358
502
108
179
200
308
477
90
140
185
359
520
611
742
70
109
145
276
400
470
581
40
60
80
147
213
250
310
71
107
139
253
370 367
433 424
588 583 556
53
80
108
189
270
320
419
164
255
428
152
240
386
237
339
231
300
40
60
80
139
199
240
310
46
51
61
61
71
81
46
51
61
71
71
81
46
46
51
61
71
71
81
46
46
51
61
71
71
81
560
163
212
1570
1570
1600
1600
1600
1600
1800
1800
1800
1800
1800
1820
1900
1900
1900
1900
1900
1900
1980
1900
1900
1900
1900
1900
1900
1900
2200
2200
2200
2200
2200
2200
2600
2600
2600
2600
2600
2600
2700
2700
2700
2700
2700
2700
2700
2700
2700
2700
2700
2700
2700
2700
50
60
70
90
100
100
80
90
100
100
110
110
100
110
110
130
130
160
160
100
110
110
130
130
160
160
580 600C
165
125
323
380
492
655
880
1195
462
583
782
1016
1176
1338
561
710
852
1338
1688
1911
2140
663
828
980
1382
1771
2029
2407
395
467
608
817
1048
1267
619
758
1002
1232
1537
1730
728
916
1107
1655
2156
2444
2736
854
1082
1275
1841
2344
2649
3182
295
300
315
330
330
370
305
345
375
405
450
460
330
345
395
430
465
485
520
300
345
370
445
445
490
490
658
708
808
808
808
435
445
495
495
500
410
470
500
540
540
318
330
352
414
506
609
338
388
487
604
798
865
391
474
577
802
1097
1143
1370
425
522
617
910
1083
1249
1443
411
466
520
600
766
870
531
588
743
903
1123
1222
567
699
850
1192
1492
1679
1889
633
794
931
1352
1635
1831
2153
5-8
6-9
7-10
8-10
9-30
10-40
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
wt.
[kg]
705
715
760
760
810
150
200
300
300
300
231
251
291
311
346
Selection table
OD 1067
Pipe clamps, clamp bases, OD 1067 (ND 1050), type 42, 44, 46, 48, 49
type
100
250
350
44 T1 14
44 T1 15
44 T1 16
44 T1 17
44 T1 18
44 T1 19
44 T1 24
44 T1 25
44 T1 26
44 T1 27
44 T1 28
44 T1 29
44 T1 35
44 T1 36
44 T1 37
44 T1 38
44 T1 39
44 T1 46
44 T1 47
44 T1 48
92
151
208
293
373
405
73
118
172
236
297
357
61
87
125
175
214
258
87
123
172
252
300
347
380
340
69
104
137
198
241
280
63
97
125
180
223
258
99
146
188
199
242
340
334
98
144
185
197
239
329
560
84
139
170
191
233
52
83
91
106
157
107
143
199
304
580
83
106
146
wt.
[kg]
load
group
M30
618
150
89
5-6
600C
d3
wt.
[kg]
load
group
61
79
108
51
61
71
71
81
91
51
71
71
71
81
81
61
71
71
71
71
61
71
71
835
835
875
875
885
940
915
915
915
915
935
935
955
955
955
955
955
955
955
955
162
203
222
248
276
276
182
189
210
218
276
283
210
225
270
276
286
276
276
286
104
144
195
266
338
379
129
157
208
266
342
392
215
287
326
377
501
331
376
499
6-9
7-10
8-30
9-30
10-40
20-50
7-9
8-30
8-30
9-30
10-40
10-40
7-10
8-30
8-30
9-30
9-30
7-10
8-30
9-30
Heat-resistant materials,
see pp. 0.9 and 4.4
57
81
126
186
280
364
84
118
208
295
435 422
594 544 508
type
100
250
350
49 T1 13
49 T1 14
49 T1 25
49 T1 35
49 T1 45
172
301
296
414
579
134
222
251
358
498
109
180
200
308
473
81
114
182
256
364
413
60
84
140
200
286
390
93
141
188
388
680 627 608 588 574
680 680 680 680 676
760 760 760 760 760
90
140
185
359
520
614
741
70
109
145
277
400
473
580
40
60
80
147
213
250
310
71
107
147
253
358 356
479 431
582 580 570
54
81
108
189
270
324
419
166
255
425
154
240
387
237
342
231
302
40
60
80
140
200
240
310
46
51
61
61
71
81
46
51
61
71
71
81
46
46
51
61
71
71
81
46
46
51
61
71
71
81
560
163
214
1500
1640
1650
1650
1650
1650
1850
1850
1850
1850
1850
1870
1950
1950
1950
1950
1950
1950
1950
1950
1950
1950
1950
1950
1950
1950
2250
2250
2250
2250
2250
2250
2650
2650
2650
2650
2650
2650
2750
2750
2750
2750
2750
2750
2750
2750
2750
2750
2750
2750
2750
2750
50
60
70
90
100
100
80
90
100
100
110
110
100
110
110
130
130
160
160
100
110
110
130
130
160
160
580 600C
165
125
336
407
527
702
935
1124
504
627
832
1034
1251
1424
603
757
904
1417
1865
2026
2265
708
873
1052
1481
1877
2139
2601
417
498
646
865
1139
1300
642
790
1066
1290
1624
1824
763
969
1164
1722
2256
2557
2859
896
1138
1372
1926
2462
2842
3357
295
300
315
330
330
370
305
345
375
405
450
460
330
345
395
430
465
485
520
300
345
370
445
445
490
490
684
734
834
834
834
435
445
495
495
500
440
500
530
570
570
312
345
374
436
565
635
365
404
507
631
789
903
407
493
599
836
1121
1190
1387
441
546
645
943
1126
1299
1490
423
493
552
663
800
900
560
607
767
930
1164
1265
602
721
876
1235
1543
1735
1969
670
838
964
1398
1688
1876
2216
5-8
6-9
7-10
8-10
9-30
10-40
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
wt.
[kg]
705
715
760
760
810
150
200
300
300
300
243
263
304
324
361
type 46
L
d3
EK
97
134
213
317
464
595
type 48
L
d3
ER
4. T1 11
4. T1 12
4. T1 13
4. T1 14
4. T1 15
4. T1 16
4. T1 21
4. T1 22
4. T1 23
4. T1 24
4. T1 25
4. T1 26
4. T1 31
4. T1 32
4. T1 33
4. T1 34
4. T1 35
4. T1 36
4. T1 37
4. T1 41
4. T1 42
4. T1 43
4. T1 44
4. T1 45
4. T1 46
4. T1 47
330
type
380
d2
600C
16
580
d2
23
560
31
350
42 T1 19
250
d3
type 100
4.48
Selection table
OD 1118
Pipe clamps, clamp bases, OD 1118 (ND 1100), type 42, 44, 46, 48, 49
type 100
250
350
42 T2 19
31
23
16
type
100
250
350
44 T2 14
44 T2 15
44 T2 16
44 T2 17
44 T2 18
44 T2 19
44 T2 24
44 T2 25
44 T2 26
44 T2 27
44 T2 28
44 T2 29
44 T2 35
44 T2 36
44 T2 37
44 T2 38
44 T2 39
44 T2 46
44 T2 47
44 T2 48
92
151
207
294
369
405
74
113
164
232
296
358
59
87
125
174
214
259
88
123
172
249
301
348
d2
d3
Heat-resistant materials,
see pp. 0.9 and 4.4
type
type 46
L
EK
d3
type 48
L
ER
d3
374
380
340
560
69
104
137
195
241
280
63
98
125
181
223
259
100
146
188
200
242
340
334
98
144
185
197
239
329
560
84
139
170
193
233
52
83
91
106
157
107
143
199
305
580
580
83
106
147
d2
wt.
[kg]
load
group
M30
644
150
93
5-6
600C
d3
wt.
[kg]
load
group
61
79
109
51
61
71
71
81
91
51
71
71
71
81
81
61
71
71
71
71
61
71
71
860
860
900
900
915
965
940
940
940
940
960
960
980
980
980
980
980
980
980
980
162
203
222
248
276
276
182
189
210
218
276
283
210
225
270
276
286
276
276
286
109
151
200
277
346
397
132
161
213
272
349
401
220
294
332
384
511
338
383
509
6-9
7-10
8-30
9-30
10-40
20-50
7-9
8-30
8-30
9-30
10-40
10-40
7-10
8-30
8-30
9-30
9-30
7-10
8-30
9-30
600C
72
101
159
235
354
459
57
80
126
187
280
364
90
119
208
300
435 429
539 524 508
81
116
178
252
366
419
60
85
142
200
285
390
92
141
186
389
680 629 610 590 576
680 680 680 680 673
760 760 760 760 760
90
140
185
360
518
612
741
70
109
144
277
399
471
580
40
60
80
146
213
250
310
72
107
146
257
406 367
480 430
589 584 569
54
80
108
189
271
324
419
40
60
80
140
200
240
310
46
51
61
61
71
81
46
51
61
71
71
81
46
46
51
61
71
71
81
46
46
51
61
71
71
81
1560
1570
1670
1670
1690
1690
1900
1900
1900
1900
1900
1970
2000
2000
2000
2000
2030
2030
2030
2000
2000
2000
2000
2000
2000
2000
2300
2300
2300
2300
2300
2300
2700
2700
2700
2700
2700
2700
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
2800
50
60
70
90
100
100
80
90
100
100
110
110
100
110
110
130
130
160
160
100
110
110
130
130
160
160
362
427
562
718
992
1230
532
664
869
1097
1385
1545
642
806
958
1491
1963
2134
2382
754
926
1109
1571
1989
2292
2773
458
540
685
918
1206
1409
677
833
1118
1355
1713
1965
807
1020
1226
1809
2377
2691
3000
956
1187
1440
2040
2574
2993
3519
295
300
315
330
330
370
305
345
375
405
450
460
330
345
395
430
465
485
520
300
345
370
445
445
490
490
709
759
859
859
859
435
445
495
495
500
450
510
550
590
590
357
373
459
514
612
680
415
496
546
679
843
983
436
536
606
893
1159
1280
1482
497
600
687
966
1202
1329
1570
480
573
608
721
868
984
637
667
817
992
1238
1335
661
774
894
1300
1634
1828
2111
719
890
1026
1430
1784
1981
2318
5-8
6-9
7-10
8-10
9-30
10-40
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
wt.
[kg]
700
715
760
760
810
150
200
300
300
300
251
272
315
335
373
4. T2 11
4. T2 12
4. T2 13
4. T2 14
4. T2 15
4. T2 16
4. T2 21
4. T2 22
4. T2 23
4. T2 24
4. T2 25
4. T2 26
4. T2 31
4. T2 32
4. T2 33
4. T2 34
4. T2 35
4. T2 36
4. T2 37
4. T2 41
4. T2 42
4. T2 43
4. T2 44
4. T2 45
4. T2 46
4. T2 47
380
4.49
type
100
250
350
49 T2 13
49 T2 14
49 T2 25
49 T2 35
49 T2 45
174
305
298
414
581
135
223
254
358
500
110
181
204
308
475
167
255
427
155
240
389
237
343
231
304
560
163
214
580 600C
166
126
Selection table
OD 1168
Pipe clamps, clamp bases, OD 1168 (ND 1150), type 42, 44, 46, 48, 49
type
100
250
350
44 T3 14
44 T3 15
44 T3 16
44 T3 17
44 T3 18
44 T3 19
44 T3 24
44 T3 25
44 T3 26
44 T3 27
44 T3 28
44 T3 29
44 T3 35
44 T3 36
44 T3 37
44 T3 38
44 T3 39
44 T3 46
44 T3 47
44 T3 48
95
152
208
302
360
405
75
116
168
240
290
357
63
87
125
174
210
258
87
124
173
251
302
346
380
340
68
104
137
199
237
274
63
98
125
182
221
256
100
146
188
200
231
340
334
98
144
185
197
231
329
560
84
140
170
192
225
52
83
91
106
156
107
144
198
301
580
83
106
148
wt.
[kg]
load
group
M30
670
150
97
5-6
600C
d3
wt.
[kg]
load
group
61
79
109
51
61
71
71
81
91
51
71
71
71
81
81
61
71
71
71
71
61
71
71
162
203
222
248
276
276
182
189
210
225
276
283
210
225
270
276
286
276
276
298
113
156
211
288
368
414
138
169
223
307
365
419
231
308
348
403
539
354
402
532
6-9
7-10
8-30
9-30
10-40
20-50
7-9
8-30
8-30
9-30
10-40
10-40
7-10
8-30
8-30
9-30
9-30
7-10
8-30
9-30
885
885
925
925
985
1000
965
965
965
965
985
985
1005
1005
1005
1005
1020
1005
1005
1005
Heat-resistant materials,
see pp. 0.9 and 4.4
72
101
159
234
355
460
57
80
126
186
282
365
87
124
209
301
434 422
580 531 514
type
100
250
350
49 T3 13
49 T3 14
49 T3 25
49 T3 35
49 T3 45
174
308
300
414
578
137
225
255
358
497
111
183
204
308
472
80
116
179
252
366
421
90
139
183
357
522
608
742
70
107
145
275
402
468
580
40
60
80
147
213
250
310
71
106
147
258
410 367
480 424
588 583 571
54
80
108
189
271
319
420
40
60
80
140
200
240
309
1630
1650
1720
1720
1750
1750
1950
1950
1950
1950
1950
2060
2050
2050
2050
2050
2050
2100
2100
2050
2050
2050
2050
2050
2120
2120
2350
2350
2350
2350
2350
2350
2750
2750
2750
2750
2750
2750
2850
2850
2850
2850
2850
2850
2850
2850
2850
2850
2850
2850
2850
2850
50
60
70
90
100
100
80
90
100
100
110
110
100
110
110
130
130
160
160
100
110
110
130
130
160
160
389
459
598
761
1050
1263
565
704
907
1160
1424
1637
678
859
1013
1576
2119
2264
2524
798
995
1188
1662
2104
2471
2941
482
577
730
969
1271
1443
707
876
1171
1422
1795
2060
849
1070
1287
1904
2497
2798
3209
992
1257
1508
2131
2700
3158
3684
295
300
315
330
330
370
305
345
375
405
450
460
330
345
395
430
465
485
520
300
345
370
445
445
490
490
734
784
884
884
884
435
445
495
495
500
470
540
580
620
620
373
391
494
531
639
714
428
511
607
704
878
983
453
555
632
928
1167
1339
1548
512
621
716
1005
1249
1417
1672
493
588
658
756
891
1029
651
693
879
1021
1274
1380
675
797
926
1343
1688
1885
2180
741
916
1054
1476
1838
2044
2399
5-8
6-9
7-10
8-10
9-30
10-40
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
wt.
[kg]
700
715
760
760
810
150
200
300
300
300
261
284
328
348
388
type 46
L
d3
type 48
L
d3
374
398
665 617 602 589
680 680 680 680
760 760 760 760
60
85
143
201
285
390
93
141
184
394
576
673
759
46
51
61
61
71
81
46
51
61
71
71
81
46
46
51
61
71
71
81
46
46
51
61
71
71
81
EK
4. T3 11
4. T3 12
4. T3 13
4. T3 14
4. T3 15
4. T3 16
4. T3 21
4. T3 22
4. T3 23
4. T3 24
4. T3 25
4. T3 26
4. T3 31
4. T3 32
4. T3 33
4. T3 34
4. T3 35
4. T3 36
4. T3 37
4. T3 41
4. T3 42
4. T3 43
4. T3 44
4. T3 45
4. T3 46
4. T3 47
ER
type
380
d2
600C
16
580
d2
23
560
31
350
42 T3 19
250
d3
type 100
167
255
425
156
240
396
237
359
231
347
560
163
240
580 600C
180
132
4.50
Selection table
OD 1219
Pipe clamps, clamp bases, OD 1219 (ND 1200), type 42, 44, 46, 48, 49
type 100
d2
31
350
23
16
42 T4 19
250
d3
Heat-resistant materials,
see pp. 0.9 and 4.4
type
100
250
350
44 T4 14
44 T4 15
44 T4 16
44 T4 17
44 T4 18
44 T4 19
44 T4 24
44 T4 25
44 T4 26
44 T4 27
44 T4 28
44 T4 29
44 T4 35
44 T4 36
44 T4 37
44 T4 38
44 T4 39
44 T4 46
44 T4 47
44 T4 48
95
152
208
301
361
405
76
121
166
235
290
359
60
87
125
174
210
260
90
124
170
250
301
347
type
type 46
L
EK
d3
type 48
L
ER
d3
374
380
340
560
70
102
134
197
239
277
64
95
125
182
221
256
100
151
188
200
234
340
334
98
149
185
197
231
330
560
85
140
170
192
227
52
83
92
106
157
107
144
200
303
580
580
83
106
148
d2
wt.
[kg]
load
group
M30
694
150
100
5-6
600C
d3
wt.
[kg]
load
group
61
79
110
51
61
71
71
81
91
51
71
71
71
81
81
61
71
71
71
71
61
71
71
162
203
222
248
276
276
182
189
210
225
283
283
210
225
270
276
286
276
276
298
119
167
217
301
376
424
143
172
228
313
395
432
236
318
355
410
549
360
409
544
6-9
7-10
8-30
9-30
10-40
20-50
7-9
8-30
8-30
9-30
10-40
10-40
7-10
8-30
8-30
9-30
9-30
7-10
8-30
9-30
600C
910
910
950
950
1010
1030
990
990
990
990
1010
1020
1030
1030
1030
1030
1045
1030
1030
1030
72
101
159
235
354
459
57
80
126
186
281
364
90
122
208
297
435 427
580 540 505
80
116
179
252
367
410
396
656 609 594 581
680 680 680 680
760 760 760 759
60
85
141
200
285
390
92
141
189
392
574
675
751
90
140
185
360
522
613
741
70
109
144
277
402
472
580
40
60
80
146
213
250
310
71
105
146
247
405 361
473 426
568 565
54
80
108
189
270
321
420
40
60
80
140
200
240
310
46
51
61
61
71
81
46
51
61
71
71
81
46
46
51
61
71
71
81
46
46
51
61
71
71
81
1780
1780
1780
1800
1800
1800
2000
2000
2000
2000
2030
2120
2100
2100
2100
2100
2170
2180
2180
2100
2100
2100
2100
2100
2230
2230
2400
2400
2400
2400
2400
2400
2800
2800
2800
2800
2800
2800
2900
2900
2900
2900
2900
2900
2900
2900
2900
2900
2900
2900
2900
2900
50
60
70
90
100
100
80
90
100
100
110
110
100
110
110
130
130
160
160
100
110
110
130
130
160
160
419
497
638
874
1112
1384
600
757
976
1216
1521
1725
726
911
1073
1651
2199
2409
2701
846
1055
1245
1761
2224
2630
3142
512
602
777
1024
1341
1565
752
923
1230
1504
1892
2156
896
1116
1348
1992
2587
2915
3383
1049
1328
1574
2240
2836
3277
3861
295
300
315
330
330
370
305
345
375
405
450
460
330
345
395
430
465
485
520
300
345
370
445
445
490
490
760
810
910
910
910
435
445
495
495
500
490
560
610
650
650
402
418
512
567
670
766
441
527
629
734
923
1026
473
580
654
967
1241
1402
1571
533
647
741
1039
1297
1500
1770
506
603
690
793
928
1129
666
709
911
1057
1317
1425
690
817
952
1415
1733
1942
2238
761
948
1088
1515
1889
2108
2531
5-8
6-9
7-10
8-10
9-30
10-40
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
5-8
5-8
6-9
7-10
8-30
9-30
10-40
wt.
[kg]
700
715
760
760
810
150
200
300
300
300
271
294
341
367
402
4. T4 11
4. T4 12
4. T4 13
4. T4 14
4. T4 15
4. T4 16
4. T4 21
4. T4 22
4. T4 23
4. T4 24
4. T4 25
4. T4 26
4. T4 31
4. T4 32
4. T4 33
4. T4 34
4. T4 35
4. T4 36
4. T4 37
4. T4 41
4. T4 42
4. T4 43
4. T4 44
4. T4 45
4. T4 46
4. T4 47
380
4.51
type
100
250
350
49 T4 13
49 T4 14
49 T4 25
49 T4 35
49 T4 45
175
308
301
488
575
137
227
256
422
494
112
185
206
363
470
169
298
422
157
280
393
277
360
270
348
560
192
240
580 600C
180
132
600
610
650C
45 01 51
45 01 51
45 01 51
45 01 51
3.5
2.6
2.0
1.7
3.1
2.2
1.8
1.5
2.7
1.9
1.5
1.3
1.7
1.2
1.0
0.8
type
600
610
650C
49 01 55
4.4
4.0
3.6
2.5
2.3
1.7
1.3
1.1
3.2
2.0
1.5
1.1
0.9
2.8
wt.
[kg]
load
group
12
12
12
12
25
25
25
25
70
70
70
70
300
400
500
600
3.9
5.0
6.1
7.2
C-4
C-4
C-4
C-4
wt.
[kg]
211
250
140
330
200
5.6
wt.
[kg]
load
group
d1
650C
45 02 51
45 02 51
45 02 51
45 02 51
3.6
2.6
2.0
1.7
3.2
2.3
1.8
1.5
2.7
2.0
1.6
1.3
1.8
1.3
1.0
0.8
12
12
12
12
25
25
25
25
70
70
70
70
300
400
500
600
3.9
5.0
6.1
7.2
C-4
C-4
C-4
C-4
type
600
610
650C
wt.
[kg]
49 02 55
4.5
4.0
3.6
2.5
213
250
140
330
200
5.7
2.4
1.7
1.3
1.1
3.2
2.1
1.5
1.2
1.0
2.8
d1
type 43
B
d1
600
type
Pipe clamps, clamp bases, OD 33.7 (ND 25), type 43, 45, 49
wt.
[kg]
load
group
235
50
1.4
C-2
610
650C
43 03 59
4.4
3.9
3.4
2.3
650C
1.8
6.0
1.3
4.4
1.0
3.4
0.8
2.8
12
12
12
12
12
12
12
12
25
25
25
25
25
25
25
25
70
100
70
100
70
100
70
100
217
250
3.0
2.7
type
600
610
45 03 51
45 03 52
45 03 51
45 03 52
45 03 51
45 03 52
45 03 51
45 03 52
3.7
9.3
2.7
8.8
2.1
6.9
1.7
5.6
3.3
9.3
2.4
7.7
1.8
6.0
1.5
5.0
2.8
9.2
2.0
6.7
1.6
5.3
1.3
4.3
type
600
610
650C
49 03 55
4.7
4.2
3.8
2.6
2.5
8.0
1.8
5.9
1.4
4.6
1.1
3.7
3.3
2.1
6.9
1.5
5.1
1.2
4.0
1.0
3.2
2.9
d1
12
d1
wt.
[kg]
load
group
300
300
400
400
500
500
600
600
3.9
8.1
5.0
10.5
6.1
12.8
7.2
15.2
C-4
C-4
C-4
C-4
C-4
C-4
C-4
C-4
wt.
[kg]
140
330
200
6.0
type 45
L
d1
E
600
type
Pipe clamps, clamp bases, OD 42.4 (ND 32), type 43, 45, 49
610
4.4
3.9
3.4
type
600
610
650C
45 04 51
45 04 52
45 04 51
45 04 52
45 04 51
45 04 52
45 04 51
45 04 52
7.3
18
5.5
14
4.4
11
3.7
9.4
6.4
16
4.8
12
3.9
9.9
3.2
8.3
5.5
14
4.2
10
3.4
8.6
2.8
7.2
3.5
9.2
2.7
6.9
2.2
5.6
1.8
4.7
type
600
610
650C
49 04 55
5.2
4.7
4.1
2.9
3.0
4.8
12
3.6
9.3
2.9
7.5
2.4
6.3
3.7
2.7
4.2
10
3.2
8.1
2.5
6.5
2.1
5.4
3.2
650C
2.3
12
d1
d1
240
50
1.4
load
group
C-2
wt.
[kg]
load
group
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
70
100
70
100
70
100
70
100
350
350
450
450
550
550
650
650
6.6
12.8
8.2
15.9
9.9
19.0
11.5
22.2
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
wt.
[kg]
221
250
140
330
200
6.1
type 49
C
600
43 04 59
wt.
[kg]
type
4.52
type 43
d1
type
600
610
650C
d1
wt.
[kg]
load
group
43 05 59
4.4
3.9
3.4
2.3
12
240
50
1.4
C-2
type
600
610
650C
d1
wt.
[kg]
load
group
45 05 51
45 05 52
45 05 51
45 05 52
45 05 51
45 05 52
45 05 51
45 05 52
8.6
20
6.5
17
5.2
13
4.3
12
7.5
20
5.7
15
4.5
12
3.8
10
6.6
17
4.9
13
3.9
10
3.3
8.8
4.2
11
3.2
8.6
2.5
6.9
2.1
5.7
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
80
120
80
120
80
120
80
120
350
350
450
450
550
550
650
650
7.5
15.4
9.4
19.1
11.3
22.9
13.2
26.7
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
type
600
610
650C
wt.
[kg]
49 05 55
5.2
4.7
4.2
2.9
224
250
140
330
200
6.2
3.0
5.7
15
4.3
11
3.4
9.2
2.8
7.7
3.7
2.7
5.0
13
3.7
10
3.0
8.0
2.5
6.7
3.2
type 45
L
d1
type
600
610
650C
d1
wt.
[kg]
load
group
43 06 59
4.7
4.6
4.6
3.6
12
250
50
2.4
C-4
type
600
610
650C
d1
wt.
[kg]
load
group
45 06 51
45 06 52
45 06 51
45 06 52
45 06 51
45 06 52
45 06 51
45 06 52
9.3
20
7.5
16
6.0
13
5.1
10
8.6
18
6.6
14
5.3
11
4.5
9.6
7.5
15
5.7
12
4.6
9.9
3.9
8.3
4.8
10
3.7
7.9
3.0
6.4
2.5
5.4
12
16
12
16
12
16
12
16
25
30
25
30
25
30
25
30
100
120
100
120
100
120
100
120
400
400
500
500
600
600
700
700
10.7
17.4
13.0
21.2
15.4
24.9
17.7
28.7
C-4
1-4
C-4
1-4
C-4
1-4
C-4
1-4
type
600
610
650C
wt.
[kg]
49 06 55
5.9
5.3
4.8
3.3
230
250
140
330
200
6.6
Pipe clamps, clamp bases, OD 60.3 (ND 50), type 43, 45, 49
type 48
L
ER
d3
dN
4.6
6.5
13
5.0
10
4.0
8.6
3.4
7.3
4.2
4.2
5.6
12
4.3
9.0
3.5
7.5
2.9
6.3
3.7
type 49
C
600
610
650C
d1
wt.
[kg]
load
group
43 07 59
4.7
4.6
4.6
3.6
12
255
50
2.5
C-4
type
600
610
650C d3
dN
ER
min
48 07 51
48 07 52
48 07 53
7.9
11
19
7.0
10
17
6.2
9.0
15
4.1
6.0
10
36
36
36
70
70
100
350
350
350
type
600
610
650C
49 07 55
5.9
5.3
4.8
3.3
4.53
type
4.6
5.4
8.0
13
4.2
4.2
4.6
7.0
11
3.7
21
21
25
[kg]
max min max
750
750
750
6.0
8.0
10
14
18
23
load
group
C-4
C-4
3-5
wt.
[kg]
237
250
140
330
200
6.8
600
610
650C
d1
wt.
[kg]
load
group
43 08 59
4.7
4.6
4.6
3.6
12
255
50
2.5
C-4
type
600
610
650C d3
dN
ER
min
48 08 51
48 08 52
48 08 53
7.9
11
19
7.0
10
17
6.2
9.0
15
4.1
6.0
10
36
36
36
70
70
100
350
350
350
type
600
610
650C
49 08 55
6.1
5.5
4.9
3.4
4.4
4.6
7.0
11
3.8
21
21
25
wt. [kg]
max min max
750
750
750
6.0
8.0
10
14
18
23
load
group
C-4
C-4
3-5
wt.
[kg]
238
250
140
330
200
6.9
type 43
Pipe clamps, clamp bases, OD 88.9 (ND 80), type 43, 48, 49
600
610
43 09 59
4.7
4.6
4.6
type
600
610
650C d3
dN
ER
min
48 09 51
48 09 52
48 09 53
8.1
11
19
7.2
10
17
6.4
9.0
15
4.2
6.0
10
36
36
36
75
85
100
350
350
350
type
600
610
650C
49 09 55
8.9
8.0
7.2
4.9
4.6
5.5
7.9
13
6.3
650C
d1
3.6
12
260
4.2
4.8
6.8
11
5.6
21
21
25
wt.
[kg]
load
group
50
2.7
C-4
wt. [kg]
max min max
850
850
850
7.0
7.0
10
17
21
28
type
load
group
C-4
C-4
3-5
wt.
[kg]
294
305
170
385
250
10.0
type 48
600
610
43 10 59
9.7
9.2
8.2
type
600
610
650C d3
dN
ER
min
48 10 51
48 10 52
48 10 53
11
15
30
10
13
27
9.1
12
24
6.1
8.0
16
51
51
51
85
95
140
350
350
350
7.1
8.0
10
21
650C
d1
5.1
16
270
6.1
7.0
9.2
18
21
25
34
wt.
[kg]
load
group
70
5.1
1-4
wt. [kg]
max min max
950
950
950
9.0
10
17
25
30
48
L
d3
load
group
ER
5.4
8.0
13
4.2
d1
4.6
dN
C-4
3-5
3-6
610
650C
d1
wt.
[kg]
load
group
43 11 59
9.7
9.2
8.2
5.1
16
275
70
5.2
1-4
type 49
650C d3
dN
ER
min
load
group
9.1
12
24
6.1
8.0
16
51
51
51
85
95
140
350
350
350
600
610
48 11 51
48 11 52
48 11 53
11
15
30
10
13
27
8.0
10
21
6.1
7.0
9.2
18
21
25
34
wt. [kg]
max min max
950
950
950
9.0
10
17
25
30
48
C-4
3-5
3-6
type
7.1
type
type
600
610
650C
d1
wt.
[kg]
load
group
43 13 59
9.7
9.6
9.5
6.8
16
290
80
8.1
1-4
type
600
610
48 13 51
48 13 52
48 13 53
13
19
33
12
17
29
10
15
26
8.9
9.2
13
23
7.9
8.0
11
19
wt. [kg]
max min max
650C d3
dN
ER
min
7.0
9.9
17
51
51
51
95
110
150
400 1000
400 1000
400 1000
21
25
34
11
13
21
30
37
55
load
group
C-4
3-5
4-6
4.54
type 43
d1
type
600
610
650C
d1
wt.
[kg]
load
group
43 14 59
9.7
9.6
9.5
6.8
16
295
80
8.2
1-4
type
600
610
48 14 51
48 14 52
48 14 53
13
19
33
12
17
29
10
15
26
8.9
9.2
13
23
7.9
wt. [kg]
max min max
650C d3
dN
ER
min
7.0
9.9
17
51
51
51
95
110
150
400 1000
400 1000
400 1000
8.0
11
19
21
25
34
11
14
21
30
37
55
load
group
C-4
3-5
4-6
600
610
650C
d1
wt.
[kg]
load
group
43 16 59
9.7
9.6
9.5
6.8
16
315
80
8.8
1-4
type
600
610
48 16 51
48 16 52
48 16 53
13
21
40
12
19
36
10
17
32
8.9
9.2
15
28
7.9
wt. [kg]
max min max
650C d3
dN
ER
min
7.0
11
21
63
63
63
100
125
150
450 1050
450 1050
450 1050
8.0
13
24
21
25
34
12
15
26
31
40
69
load
group
C-4
3-5
4-6
d3
type
600
610
650C
d1
wt.
[kg]
load
group
43 17 59
9.7
9.6
9.5
6.8
16
320
80
9.1
1-4
type
600
610
48 17 51
48 17 52
48 17 53
13
21
40
12
19
36
10
17
32
8.9
9.2
15
28
7.9
wt. [kg]
max min max
650C d3
dN
ER
min
7.0
11
21
63
63
63
100
125
150
450 1050
450 1050
450 1050
8.0
13
24
21
25
34
12
15
26
31
40
70
load
group
C-4
3-5
4-6
type 48
L
dN
4.55
ER
d3
type
600
610
650C
d1
wt.
[kg]
load
group
43 19 59
15.1
14.9
14.9
11.6
20
355
100
16
3-6
type
600
610
650C d3
dN
ER
min
48 19 51
48 19 52
48 19 53
48 19 54
11
17
28
50
10
17
25
44
9.0
15
22
39
6.0
10
14
26
63
63
63
63
110
125
150
160
550
550
550
550
14.8
8.0
13
19
34
13.4
6.9
11
16
29
21
25
25
41
wt. [kg]
max min max
1150
1150
1150
1150
16
20
25
51
34
45
59
102
load
group
C-4
3-5
3-5
4-7
600
610
44 22 51
44 22 52
44 22 53
11
27
40
10
23
35
type
600
610
48 22 51
48 22 52
48 22 53
48 22 54
11
26
34
61
10
23
31
54
650C
d3
max.
insul.
wt.
[kg]
load
group
8.9
20
30
5.6
13
19
21
34
46
430
460
485
115
105
165
280
280
280
18
33
50
C-4
4-6
5-8
7.7
18
26
6.7
15
23
650C d3
dN
ER
min
9.2
20
27
48
6.1
13
18
31
79
79
79
79
130
150
170
200
550
550
550
550
8.1
17
24
42
7.1
15
20
36
21
25
41
46
wt. [kg]
max min max
1350
1350
1350
1350
16
23
30
54
43
67
79
133
load
group
C-4
3-5
4-7
5-8
600
610
44 24 51
44 24 52
44 24 53
11
26
40
10
23
35
type
600
610
48 24 51
48 24 52
48 24 53
48 24 54
14
27
40
68
12
25
36
60
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
9.1
19
30
5.8
12
19
21
34
46
440
475
500
120
105
172
280
280
280
20
34
53
C-4
4-6
5-8
8.0
17
27
6.8
15
23
9.7
19
28
46
650C d3
dN
ER
min
7.3
14
21
35
79
79
79
79
110
150
160
180
550
550
550
550
8.4
17
24
40
25
25
41
46
wt. [kg]
max min max
1350
1350
1350
1350
17
27
38
62
47
71
97
153
load
group
3-5
3-5
4-7
5-8
610
44 26 51
44 26 52
44 26 53
11
27
42
10
23
37
type
600
610
48 26 51
48 26 52
48 26 53
48 26 54
15
29
41
74
14
26
37
65
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
9.1
20
32
5.8
13
20
21
34
46
455
485
505
125
112
182
280
280
280
21
36
57
C-4
4-6
5-8
8.1
17
28
6.8
15
24
11
20
29
50
650C d3
dN
ER
min
8.3
15
22
38
92
92
92
92
120
150
160
195
600
600
600
600
9.5
17
25
43
25
25
41
46
wt. [kg]
max min max
1400
1400
1400
1400
21
29
41
68
52
75
100
158
type 44
d3
load
group
type
3-5
3-5
4-7
5-8
610
44 27 51
44 27 52
44 27 53
10
27
40
10
23
37
type
600
610
48 27 51
48 27 52
48 27 53
48 27 54
15
29
41
74
14
26
37
65
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
9.1
20
32
5.8
13
20
21
34
46
455
485
505
125
112
182
280
280
280
21
37
57
C-4
4-6
5-8
8.1
17
28
6.8
15
24
11
20
29
50
650C d3
dN
ER
min
8.3
15
22
38
92
92
92
92
120
150
160
195
600
600
600
600
9.5
17
25
43
25
25
41
46
wt. [kg]
max min max
1400
1400
1400
1400
21
29
41
69
53
75
100
159
type 48
L
load
group
3-5
3-5
4-7
5-8
d3
dN
ER
type
type
600
610
44 32 51
44 32 52
44 32 53
44 32 54
18
30
60
82
18
30
59
80
type
600
610
48 32 51
48 32 52
48 32 53
48 32 54
48 32 55
48 32 56
23
40
60
71
92
150
21
39
53
68
90
136
18
34
47
60
80
120
18
29
53
70
15
27
47
62
16
30
41
52
70
106
13
23
40
53
14
26
35
45
61
92
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
11
20
34
43
25
34
46
51
500
510
530
545
100
175
147
195
290
290
290
290
35
55
80
105
3-5
4-6
5-8
6-9
dN
ER
min
118
118
118
118
118
118
150
180
180
210
250
250
700
700
700
700
800
800
650C d3
12
23
31
40
53
80
25
41
46
46
51
51
wt. [kg]
max min max
1400
1400
1400
1400
1400
1400
32
48
61
75
94
120
70
103
129
156
183
238
load
group
3-5
4-7
5-8
5-8
6-9
6-9
4.56
type
600
610
44 36 51
44 36 52
44 36 53
44 36 54
21
30
56
92
20
30
54
80
type
600
610
48 36 51
48 36 52
48 36 53
48 36 54
48 36 55
48 36 56
20
28
48
73
120
177
18
25
42
71
105
158
16
22
37
63
93
140
18
29
52
69
16
27
46
61
13
19
32
55
81
122
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
11
20
33
43
25
34
46
51
520
525
545
555
105
182
147
195
290
290
290
290
39
59
84
113
3-5
4-6
5-8
6-9
dN
ER
min
118
118
118
118
118
118
140
160
180
220
240
240
700
700
800
800
800
800
13
23
39
52
650C d3
12
16
28
48
70
106
10
14
24
42
62
93
25
34
41
46
51
51
wt. [kg]
max min max
1500
1500
1500
1500
1500
1500
32
37
65
89
108
138
72
87
126
178
220
286
load
group
3-5
4-6
4-7
5-8
6-9
6-9
type 44
d3
type 48
type
600
610
44 37 51
44 37 52
44 37 53
44 37 54
20
30
54
91
19
30
53
79
type
600
610
48 37 51
48 37 52
48 37 53
48 37 54
48 37 55
48 37 56
20
28
48
73
120
177
18
25
42
71
105
158
16
22
37
63
93
140
18
29
52
69
16
28
47
60
13
19
32
55
81
122
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
12
20
33
43
25
34
46
51
530
535
550
560
112
190
150
195
290
290
290
290
41
63
87
115
3-5
4-6
5-8
6-9
dN
ER
min
118
118
118
118
118
118
140
160
180
220
240
240
750
750
750
750
850
850
14
24
40
51
650C d3
12
16
28
48
70
106
10
14
24
42
62
93
25
34
41
46
51
51
wt. [kg]
max min max
1500
1500
1500
1500
1500
1500
33
39
63
86
113
145
72
87
127
179
221
287
load
group
3-5
4-6
4-7
5-8
6-9
6-9
L
d3
dN
4.57
ER
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
11
26
43
57
25
46
51
51
560
580
580
590
112
140
200
190
300
300
300
300
44
84
121
138
3-5
5-8
6-9
6-9
dN
ER
min
144
144
144
144
144
144
160
180
200
240
230
230
800
800
800
800
900
900
type
600
610
44 41 51
44 41 52
44 41 53
44 41 54
19
45
78
108
18
44
77
106
type
600
610
650C d3
48 41 51
48 41 52
48 41 53
48 41 54
48 41 55
48 41 56
23
41
54
82
137
196
21
36
49
72
125
186
18
32
43
64
110
165
12
21
29
42
73
109
17
42
68
94
15
37
60
81
16
28
38
56
96
144
13
32
51
68
14
24
33
48
83
125
25
41
46
46
51
61
wt. [kg]
max min max
1600
1600
1600
1600
1600
1600
43
62
72
94
128
177
96
128
149
195
254
348
load
group
3-5
4-7
5-8
5-8
6-9
7-10
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
12
28
45
57
25
46
51
51
565
585
585
595
115
140
210
195
300
300
300
300
45
87
127
140
3-5
5-8
6-9
6-9
dN
ER
min
144
144
144
144
144
144
160
180
200
240
230
230
800
800
800
900
900
900
type
600
610
44 42 51
44 42 52
44 42 53
44 42 54
18
46
77
105
18
45
76
104
type
600
610
650C d3
48 42 51
48 42 52
48 42 53
48 42 54
48 42 55
48 42 56
23
41
54
82
137
196
21
36
49
72
125
186
18
32
43
64
110
165
12
21
29
42
73
109
18
44
71
94
16
38
62
82
16
28
38
56
96
144
14
33
53
69
14
24
33
48
83
125
25
41
46
46
51
61
wt. [kg]
max min max
1600
1600
1600
1600
1600
1600
43
62
73
103
129
178
97
128
150
196
255
349
load
group
3-5
4-7
5-8
5-8
6-9
7-10
type 44
max
B
max.
insul.
wt.
[kg]
load
group
12
20
40
64
89
25
46
51
51
61
590
600
605
620
640
122
140
195
315
255
300
300
300
300
300
50
80
128
176
218
3-5
5-8
6-9
6-9
7-10
dN
ER
min
144
144
144
144
144
144
600
610
44 46 51
44 46 52
44 46 53
44 46 54
44 46 55
19
38
71
108
144
19
37
70
106
143
18
33
64
101
137
type
600
610
650C d3
48 46 51
48 46 52
48 46 53
48 46 54
48 46 55
48 46 56
39
46
73
153
168
260
36
41
70
144
161
242
32
36
62
128
143
214
21
24
41
84
95
142
28
32
54
111
126
187
14
24
48
76
103
24
27
47
96
109
162
41
46
46
51
61
61
wt. [kg]
max min max
73
78
110
185
199
241
142
152
211
340
363
496
650C
type
16
29
56
89
120
d3
load
group
4-7
5-8
5-8
6-9
7-10
7-10
type 48
L
d3
max
B
11
23
45
60
94
25
46
51
61
61
615
630
635
650
665
122
140
230
220
280
dN
ER
min
173
173
173
173
173
173
185
200
235
275
310
310
1000
1000
1000
1050
1050
1050
type
600
610
44 51 51
44 51 52
44 51 53
44 51 54
44 51 55
19
39
76
122
161
18
38
75
113
160
17
36
72
99
146
type
600
610
650C d3
48 51 51
48 51 52
48 51 53
48 51 54
48 51 55
48 51 56
41
46
78
144
202
284
36
41
71
144
179
266
32
36
63
128
158
236
21
24
42
84
105
156
15
32
63
86
128
28
32
55
111
138
206
13
27
54
72
110
24
28
48
96
119
178
41
46
46
51
61
61
max.
insul.
wt.
[kg]
load
group
300
300
300
300
300
54
92
152
209
264
3-5
5-8
6-9
7-10
7-10
wt. [kg]
max min max
1800
1800
1800
1800
1800
1800
87
94
129
186
236
303
164
174
240
352
407
547
dN
ER
d3
load
group
4-7
5-8
5-8
6-9
7-10
7-10
4.58
type 44
type
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 56 51
44 56 52
44 56 53
44 56 54
44 56 55
37
77
117
145
229
36
76
114
143
226
36
72
100
134
199
23
46
60
80
120
46
51
61
61
71
655
665
675
690
705
140
242
230
312
277
300
300
300
300
300
100
167
225
273
369
5-8
6-9
7-10
7-10
8-30
type
600
610
650C d3
dN
ER
min
48 56 51
48 56 52
48 56 53
48 56 54
48 56 55
48 56 56
44
61
79
149
236
324
39
54
71
141
217
322
34
48
63
125
192
288
23
32
42
83
128
190
173
173
173
173
173
173
200
235
240
280
355
355
1100
1100
1100
1100
1200
1200
32
63
86
116
173
30
42
55
109
168
251
27
54
73
97
145
26
37
48
94
146
217
41
46
46
51
61
61
wt. [kg]
max min max
1900
1900
1900
1900
1900
1900
103
128
148
216
327
401
184
226
264
391
546
672
load
group
4-7
5-8
5-8
6-9
7-10
7-10
d3
type 48
L
dN
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 61 51
44 61 52
44 61 53
44 61 54
44 61 55
39
80
116
164
249
38
79
113
162
245
37
73
99
159
221
24
46
60
96
135
46
51
61
71
71
695
705
715
740
750
140
255
239
230
328
310
310
310
310
310
113
186
246
332
445
5-8
6-9
7-10
8-30
8-30
type
600
610
650C d3
dN
ER
min
48 61 51
48 61 52
48 61 53
48 61 54
48 61 55
48 61 56
48 61 57
43
83
101
147
223
280
424
39
73
93
141
215
266
399
34
65
83
125
190
236
353
23
43
55
83
126
157
234
199
199
199
199
199
199
199
220
225
280
295
355
350
350
1200
1200
1200
1300
1300
1300
1300
33
64
86
137
194
30
57
72
110
166
207
308
28
55
72
115
163
26
49
62
95
143
179
267
41
46
46
51
61
71
71
wt. [kg]
max min max
2000
2000
2000
2000
2000
2000
2000
123
171
194
249
331
429
517
209
294
338
418
573
689
851
load
group
4-7
5-8
5-8
6-9
7-10
8-30
8-30
ER
d3
type
4.59
type
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 66 51
44 66 52
44 66 53
44 66 54
44 66 55
36
76
120
164
247
36
75
113
162
244
35
72
99
157
222
23
45
60
95
135
46
51
61
71
71
720
730
745
770
775
140
260
250
235
338
310
310
310
310
310
119
200
265
355
477
5-8
6-9
7-10
8-30
8-30
type
600
610
650C d3
dN
ER
min
48 66 51
48 66 52
48 66 53
48 66 54
48 66 55
48 66 56
48 66 57
51
82
113
158
226
300
440
45
72
99
144
219
270
401
40
64
88
127
194
239
355
26
42
58
84
129
159
235
224
224
224
224
224
224
224
230
230
280
310
330
350
350
1250
1250
1250
1250
1350
1350
1350
32
63
86
136
194
35
56
77
111
170
209
310
27
54
72
114
163
30
48
66
96
147
181
268
L
41
46
46
51
61
71
71
wt. [kg]
max min max
2050
2050
2050
2050
2050
2050
2050
155
190
223
263
361
448
534
262
320
377
458
615
709
874
load
group
4-7
5-8
5-8
6-9
7-10
8-30
8-30
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 71 51
44 71 52
44 71 53
44 71 54
44 71 55
44 71 56
50
75
116
148
206
265
50
74
112
147
203
262
45
72
99
142
187
248
28
45
60
86
113
155
46
51
61
61
71
71
740
760
770
785
795
810
165
270
255
217
287
265
310
310
310
310
310
310
146
217
286
326
449
542
5-8
6-9
7-10
7-10
8-30
9-30
type
600
610
650C d3
dN
ER
min
48 71 51
48 71 52
48 71 53
48 71 54
48 71 55
48 71 56
48 71 57
56
77
127
154
228
316
469
49
72
112
141
218
282
427
43
64
99
125
194
250
379
29
42
66
83
129
166
251
224
224
224
224
224
224
224
230
230
280
310
335
355
355
1300
1300
1300
1400
1400
1450
1450
33
48
75
95
147
189
286
41
46
51
51
61
71
71
wt. [kg]
max min max
2100
2100
2100
2100
2100
2100
2100
168 280
201 333
247 416
292 471
383 640
495 759
600 1016
load
group
4-7
5-8
6-9
6-9
7-10
8-30
9-30
type
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 76 51
44 76 52
44 76 53
44 76 54
44 76 55
44 76 56
50
78
116
164
225
322
49
77
113
162
222
320
46
72
99
160
210
292
29
45
60
97
127
180
46
51
61
71
71
81
770
790
800
815
820
835
175
280
265
252
330
322
310
310
310
310
310
310
160
235
305
421
537
700
5-8
6-9
7-10
8-30
9-30
10-40
type
600
610
650C d3
dN
ER
min
48 76 51
48 76 52
48 76 53
48 76 54
48 76 55
48 76 56
48 76 57
61
82
121
144
230
364
507
54
72
107
143
216
322
485
48
64
94
127
192
286
430
32
42
63
84
127
190
285
250
250
250
250
250
250
250
260
260
310
340
330
410
410
1500
1500
1500
1500
1500
1600
1600
42
56
83
110
168
250
375
35
54
72
116
153
220
36
48
72
96
145
217
325
41
46
51
51
61
71
71
wt. [kg]
max min max
2300
2300
2300
2300
2300
2300
2300
214 345
252 393
300 480
344 558
425 713
632 960
798 1214
load
group
4-7
5-8
6-9
6-9
7-10
8-30
9-30
type
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 81 51
44 81 52
44 81 53
44 81 54
44 81 55
44 81 56
76
119
164
166
225
325
75
113
162
164
222
323
73
99
150
163
208
294
46
60
91
106
126
180
51
61
71
71
71
81
825
840
850
855
855
875
295
277
245
287
340
338
320
320
320
320
320
320
257
335
436
493
572
754
6-9
7-10
8-30
8-30
9-30
10-40
type
600
610
650C d3
dN
ER
min
48 81 51
48 81 52
48 81 53
48 81 54
48 81 55
48 81 56
48 81 57
69
85
118
151
232
381
563
61
82
107
144
219
366
545
54
73
95
128
194
324
483
36
48
63
85
129
215
320
250
250
250
250
250
250
250
280
300
330
350
350
450
450
1600
1600
1600
1600
1600
1600
1600
47
63
83
111
170
283
421
55
72
109
127
151
221
41
55
72
96
147
245
365
type 48
L
d3
dN
64
86
130
151
180
258
d3
40
63
86
138
181
256
type 44
46
46
51
51
61
71
71
wt. [kg]
max min max
2400
2400
2400
2400
2400
2400
2400
257 395
292 451
329 519
379 598
474 773
706 1100
901 1390
ER
38
56
87
109
170
218
330
34
54
72
103
136
186
39
63
85
123
161
218
load
group
5-8
5-8
6-9
6-9
7-10
8-30
9-30
4.60
type 44
d3
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 86 51
44 86 52
44 86 53
44 86 54
44 86 55
44 86 56
85
122
164
203
225
339
76
116
160
188
222
335
65
100
139
163
197
292
41
65
85
100
119
180
51
61
71
71
71
81
845
870
880
890
885
910
270
245
236
280
335
347
320
320
320
320
320
320
265
340
438
499
583
806
6-9
7-10
8-30
8-30
9-30
10-40
type
600
610
650C d3
dN
ER
min
48 86 51
48 86 52
48 86 53
48 86 54
48 86 55
48 86 56
48 86 57
74
89
122
171
256
409
617
65
87
112
157
246
387
575
58
77
100
139
218
343
510
38
51
66
92
145
229
338
279
279
279
279
279
279
279
280
300
330
350
350
450
450
1650
1650
1650
1650
1650
1650
1650
57
88
121
143
171
256
50
68
88
121
191
301
444
49
76
102
120
144
220
43
59
76
105
165
261
385
46
46
51
51
61
71
71
wt. [kg]
max min max
2450
2450
2450
2450
2450
2450
2450
290 434
323 496
365 566
423 662
576 892
779 1192
989 1500
load
group
5-8
5-8
6-9
6-9
7-10
8-30
9-30
type 48
L
dN
ER
d3
4.61
type
type
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 91 51
44 91 52
44 91 53
44 91 54
44 91 55
44 91 56
81
116
164
166
225
330
79
113
162
164
222
328
72
99
148
163
208
294
45
60
90
109
126
180
51
61
71
71
71
81
870
895
905
915
910
935
305
293
255
312
360
357
320
320
320
320
320
320
299
380
487
567
649
849
6-9
7-10
8-30
8-30
9-30
10-40
type
600
610
650C d3
dN
ER
min
48 91 51
48 91 52
48 91 53
48 91 54
48 91 55
48 91 56
48 91 57
81
121
163
278
393
473
685
71
108
144
252
366
432
646
63
96
128
223
324
383
573
42
64
84
150
215
254
380
279
279
279
279
279
279
279
300
330
350
385
470
450
450
1700
1700
1700
1700
1800
1800
1800
63
86
128
155
179
258
55
84
111
197
283
334
501
54
72
107
130
151
221
48
73
96
171
245
290
434
46
46
51
61
71
71
81
wt. [kg]
max min max
load
group
5-8
5-8
6-9
7-10
8-30
9-30
10-40
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 97 51
44 97 52
44 97 53
44 97 54
44 97 55
44 97 56
77
110
160
184
218
332
75
109
157
181
217
330
65
97
139
161
191
291
41
60
85
100
119
180
51
61
71
71
71
81
895
920
930
940
935
960
287
250
250
296
350
360
320
320
320
320
320
320
298
373
483
549
664
886
6-9
7-10
8-30
8-30
9-30
10-40
type
600
610
650C d3
dN
ER
min
48 97 51
48 97 52
48 97 53
48 97 54
48 97 55
48 97 56
48 97 57
81
127
166
289
398
468
718
80
126
147
255
373
444
665
71
111
130
226
330
393
590
47
74
86
150
219
261
392
330
330
330
330
330
330
330
300
330
350
385
470
450
450
1750
1750
1750
1750
1850
1850
1850
57
85
121
141
167
255
62
98
114
197
288
343
516
49
73
102
121
143
220
53
85
98
171
250
297
447
46
46
51
61
71
71
81
wt. [kg]
max min max
2550 360
2550 437
2550 469
2550 672
2550 899
2550 965
2550 1215
552
664
721
1015
1295
1450
1825
load
group
5-8
5-8
6-9
7-10
8-30
9-30
10-40
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 T0 51
44 T0 52
44 T0 53
44 T0 54
44 T0 55
44 T0 56
44 T0 57
73
114
164
193
234
329
422
72
111
159
187
223
327
419
65
96
138
162
193
288
385
40
60
85
100
119
180
240
51
61
71
71
71
81
91
920
950
960
970
970
990
1000
290
255
255
303
340
365
370
320
320
320
320
320
320
320
314
396
513
587
715
930
1151
6-9
7-10
8-30
8-30
9-30
10-40
20-50
type
600
610
650C d3
dN
ER
min
48 T0 51
48 T0 52
48 T0 53
48 T0 54
48 T0 55
48 T0 56
48 T0 57
100
155
171
301
426
510
766
89
137
159
280
410
486
735
79
121
141
248
363
431
652
52
80
94
164
242
286
433
330
330
330
330
330
330
330
300
330
350
385
470
450
450
1800
1800
1800
1800
1900
1900
1900
57
85
121
142
170
252
338
68
106
124
216
319
376
570
49
73
102
120
146
217
290
59
92
107
187
276
326
494
46
46
51
61
71
71
81
wt. [kg]
max min max
load
group
5-8
5-8
6-9
7-10
8-30
9-30
10-40
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 T1 51
44 T1 52
44 T1 53
44 T1 54
44 T1 55
44 T1 56
44 T1 57
75
114
164
196
237
338
427
74
113
160
185
224
335
421
64
97
140
160
194
292
391
40
60
85
100
119
180
240
51
61
71
71
71
81
91
950
980
985
1000
1000
1020
1030
295
265
261
312
350
382
385
320
320
320
320
320
320
320
333
424
546
619
758
991
1226
6-9
7-10
8-30
8-30
9-30
10-40
20-50
type
600
610
650C d3
dN
ER
min
48 T1 51
48 T1 52
48 T1 53
48 T1 54
48 T1 55
48 T1 56
48 T1 57
99
151
163
282
430
516
766
87
139
161
280
407
484
733
77
123
143
248
361
429
650
51
81
95
165
239
285
430
330
330
330
330
330
330
330
300
330
350
385
470
450
450
1850
1850
1850
1850
1950
1950
1950
56
85
121
141
170
256
343
68
107
125
218
315
375
566
48
73
102
120
144
220
290
59
93
108
188
273
325
491
46
46
51
61
71
71
81
wt. [kg]
max min max
load
group
5-8
5-8
6-9
7-10
8-30
9-30
10-40
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 T2 51
44 T2 52
44 T2 53
44 T2 54
44 T2 55
44 T2 56
44 T2 57
76
110
164
200
232
324
427
73
108
157
182
221
323
421
63
95
136
158
191
292
385
40
60
85
100
119
180
240
51
61
71
71
71
81
91
980
1010
1015
1020
1030
1050
1065
300
265
268
318
355
392
390
320
320
320
320
320
320
320
351
440
566
662
792
1041
1285
6-9
7-10
8-30
8-30
9-30
10-40
20-50
type
600
610
650C d3
dN
ER
min
48 T2 51
48 T2 52
48 T2 53
48 T2 54
48 T2 55
48 T2 56
48 T2 57
99
142
181
279
433
502
766
87
139
161
279
408
485
731
77
123
143
248
361
430
648
51
81
95
166
240
285
431
374
374
374
374
374
374
374
300
330
350
385
470
450
450
1900
1900
1900
1900
2000
2000
2000
68
107
125
218
315
375
567
48
71
102
119
144
220
290
58
93
108
189
273
325
492
d3
type 48
L
d3
dN
type
55
83
120
138
168
256
337
type 44
46
46
51
61
71
71
81
wt. [kg]
max min max
load
group
5-8
5-8
6-9
7-10
8-30
9-30
10-40
ER
600
type
4.62
type 44
d3
type
600
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 T3 51
44 T3 52
44 T3 53
44 T3 54
44 T3 55
44 T3 56
44 T3 57
73
120
164
196
241
328
427
72
112
156
184
218
326
421
64
97
136
160
189
286
381
40
60
85
100
119
180
240
51
61
71
71
71
81
91
1005
1025
1045
1045
1060
1075
1095
312
275
274
328
360
392
395
320
320
320
320
320
320
320
372
485
594
699
831
1078
1335
6-9
7-10
8-30
8-30
9-30
10-40
20-50
type
600
610
650C d3
dN
ER
min
48 T3 51
48 T3 52
48 T3 53
48 T3 54
48 T3 55
48 T3 56
48 T3 57
94
139
173
279
441
510
766
87
139
161
278
408
486
733
77
123
143
248
361
431
650
52
82
96
164
240
286
431
374
374
374
374
374
374
374
300
330
350
385
470
450
450
56
85
119
140
166
251
334
68
108
126
216
315
376
568
48
73
102
120
142
215
287
59
93
109
187
273
326
492
46
46
51
61
71
71
81
wt. [kg]
max min max
load
group
1950
1950
1950
1950
2050
2050
2050
2750 456
2750 559
2750 595
2750 809
2750 1130
2750 1205
2750 1575
5-8
5-8
6-9
7-10
8-30
9-30
10-40
673
816
907
1242
1580
1780
2217
610
650C
d3
max
B
max.
insul.
wt.
[kg]
load
group
44 T4 51
44 T4 52
44 T4 53
44 T4 54
44 T4 55
44 T4 56
44 T4 57
77
116
164
197
236
337
427
74
112
158
186
219
325
421
64
97
137
161
190
281
381
40
60
85
100
119
180
240
51
61
71
71
71
81
91
1035
1050
1080
1075
1090
1110
1125
322
280
284
335
370
405
405
320
320
320
320
320
320
320
397
506
633
739
874
1130
1404
6-9
7-10
8-30
8-30
9-30
10-40
20-50
type
600
610
650C d3
dN
ER
min
48 T4 51
48 T4 52
48 T4 53
48 T4 54
48 T4 55
48 T4 56
48 T4 57
90
139
165
282
446
523
740
88
139
161
280
407
485
733
78
123
143
248
361
430
649
52
82
95
164
240
285
432
374
374
374
374
374
374
374
300
330
350
385
470
450
450
2000
2000
2000
2000
2100
2100
2100
type
type 48
L
dN
4.63
ER
d3
56
85
120
141
166
247
334
69
108
125
216
316
375
568
48
73
102
121
143
212
287
59
93
108
188
274
325
492
46
46
51
61
71
71
81
wt. [kg]
max min max
load
group
2800 521
2800 577
2800 617
2800 885
2800 1175
2800 1255
2800 1635
5-8
5-8
6-9
7-10
8-30
9-30
10-40
694
839
934
1285
1635
1830
2287
U-bolts
Type 40
U-bolts
type 40 01 .8 to 40 91 .8
OD
d2
A
type
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
01
02
03
04
05
06
07
08
09
10
11
14
17
22
27
32
36
41
46
51
61
71
76
91
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
.8
OD
21.3
26.9
33.7
42.4
48.3
60.3
73.0
76.1
88.9
108.0
114.3
139.7
168.3
219.1
273.0
323.9
355.6
406.4
457.2
508.0
609.6
711.2
762.0
914.4
30
35
40
53
60
72
87
91
103
123
130
155
188
238
295
350
381
432
485
537
638
740
790
943
70
70
70
75
75
85
95
95
100
115
115
130
155
180
215
245
260
285
320
345
395
450
475
550
d2 x L
M6
M6
M6
M10
M10
M10
M12
M12
M12
M12
M12
M12
M16
M16
M20
M20
M20
M20
M24
M24
M24
M24
M24
M24
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
65
65
65
65
65
70
75
75
75
75
75
75
95
95
110
110
110
110
125
125
125
125
125
125
weight
[kg]
11
13
17
21
24
30
37
38
44
54
57
70
84
110
137
162
178
203
229
254
305
356
381
457
0.05
0.05
0.05
0.15
0.16
0.18
0.30
0.31
0.32
0.36
0.37
0.42
0.91
1.08
2.07
2.35
2.55
2.80
4.55
4.90
5.70
6.50
6.90
8.00
Order details:
type 40 .. .8
Scope of delivery:
incl. 4 nuts
4.64
E
ax
sm
OD
d3
Material: S235JR
type 41 .. 11 smax = 10mm
type 41 .. 12 smax = 100mm
type
d3
41 D9 11
41 D9 12
41 29 11
41 29 12
41 39 11
41 39 12
41 49 11
41 49 12
41 59 11
41 59 12
41 69 11
41 69 12
41 79 11
41 79 12
30
30
35
65
45
70
80
120
85
130
120
165
170
230
10.5
10.5
12.5
12.5
16.5
16.5
20.5
20.5
24.5
24.5
34
34
41
41
25
115
25
115
30
120
40
125
40
130
50
140
60
150
15
15
17.5
17.5
22.5
22.5
30
30
32.5
32.5
40
40
50
50
15
15
22
22
28
28
37
37
40
40
50
50
65
65
10
10
10
10
10
10
10
10
10
10
10
10
10
10
8
8
10
10
12
12
15
15
20
20
25
25
30
30
Order details:
weld-on lugs for pipes
type 41 .9 1.
4.65
F perm. (T)
250C
350C
a
3.0
3.0
3.0
3.0
4.5
4.5
4.5
4.5
5.5
5.5
6.5
6.5
6.5
6.5
weight
[kg]
0.06
0.23
0.11
0.49
0.21
0.75
0.53
1.60
0.75
2.30
1.60
4.10
3.20
7.30
type
0.13
0.13
0.13
0.13
0.24
0.13
0.25
0.14
0.25
0.14
0.25
0.14
0.62
0.14
0.62
0.25
0.87
0.25
0.88
0.25
0.90
0.25
0.90
0.25
0.90
0.26
0.90
0.62
1.40
0.62
1.50
0.62
1.50
0.65
1.50
0.65
1.50
0.90
3.40
0.90
3.40
0.90
3.40
0.90
3.40
0.90
3.40
0.90
3.40
0.90
3.40
41 06 15
41 07 15
41 08 15
41 09 15
41 09 16
41 10 15
41 10 16
41 11 15
41 11 16
41 13 15
41 13 16
41 14 15
41 14 16
41 16 15
41 16 16
41 17 15
41 17 16
41 19 15
41 19 16
41 22 15
41 22 16
41 24 15
41 24 16
41 26 15
41 26 16
41 27 15
41 27 16
41 32 15
41 32 16
41 36 15
41 36 16
41 37 15
41 37 16
41 41 15
41 41 16
41 42 15
41 42 16
41 46 15
41 46 16
41 51 15
41 51 16
41 56 15
41 56 16
41 61 15
41 61 16
41 66 15
41 66 16
41 71 15
41 71 16
41 76 15
41 76 16
135
135
135
135
140
135
140
135
140
135
140
135
145
135
145
140
150
135
145
135
145
130
145
125
140
130
145
130
145
115
125
120
130
105
115
115
125
100
120
95
110
85
105
80
95
70
85
60
80
50
70
OD
3.0
3.0
3.0
3.0
4.5
3.0
4.5
3.0
4.5
3.0
4.5
3.0
4.5
3.0
4.5
4.5
5.5
4.5
5.5
4.5
5.5
4.5
5.5
4.5
5.5
4.5
5.5
4.5
6.5
4.5
6.5
4.5
6.5
4.5
6.5
4.5
6.5
5.5
6.5
5.5
6.5
5.5
6.5
5.5
6.5
5.5
6.5
5.5
6.5
5.5
6.5
0.44
0.44
0.44
0.44
0.75
0.44
0.75
0.45
0.75
0.46
0.77
0.47
1.60
0.47
1.70
0.78
2.30
0.78
2.30
0.80
2.30
0.80
2.40
0.80
2.40
0.80
2.40
1.70
3.70
1.70
3.70
1.80
3.70
1.80
3.70
1.80
3.80
2.40
7.10
2.50
7.10
2.50
7.10
2.50
7.10
2.50
7.10
2.50
7.20
2.50
7.20
60.3
73
76.1
88.9
88.9
108
108
114.3
114.3
133
133
139.7
139.7
159
159
168.3
168.3
193.7
193.7
219.1
219.1
244.5
244.5
267
267
273
273
323.9
323.9
355.6
355.6
368
368
406.4
406.4
419
419
457.2
457.2
508
508
558.8
558.8
609.6
609.6
660.4
660.4
711.2
711.2
762
762
load
group
C-2
C-2
C-2
C-2
2-3
C-2
2-3
C-2
2-3
C-2
2-3
C-2
3-4
C-2
3-4
2-3
4-5
2-3
4-5
2-3
4-5
2-3
4-5
2-3
4-5
2-3
4-5
3-4
5-6
3-4
5-6
3-4
5-6
3-4
5-6
3-4
5-6
4-5
6-7
4-5
6-7
4-5
6-7
4-5
6-7
4-5
6-7
4-5
6-7
4-5
6-7
R1
d3
22
22
22
22
28
22
28
22
28
22
28
22
37
22
37
28
40
28
40
28
40
28
40
28
40
28
40
37
50
37
50
37
50
37
50
37
50
40
65
40
65
40
65
40
65
40
65
40
65
40
65
17.5
17.5
17.5
17.5
22.5
17.5
22.5
17.5
22.5
17.5
22.5
17.5
30
17.5
30
22.5
32.5
22.5
32.5
22.5
32.5
22.5
32.5
22.5
32.5
22.5
32.5
30
40
30
40
30
40
30
40
30
40
32.5
50
32.5
50
32.5
50
32.5
50
32.5
50
32.5
50
32.5
50
8
8
8
8
10
8
10
8
10
8
10
8
15
8
15
10
18
10
18
10
18
10
18
10
18
10
18
15
20
15
20
15
20
15
20
15
20
18
25
18
25
18
25
18
25
18
25
18
25
18
25
12.5
12.5
12.5
12.5
16.5
12.5
16.5
12.5
16.5
12.5
16.5
12.5
20.5
12.5
20.5
16.5
24.5
16.5
24.5
16.5
24.5
16.5
24.5
16.5
24.5
16.5
24.5
20.5
34
20.5
34
20.5
34
20.5
34
20.5
34
24.5
41
24.5
41
24.5
41
24.5
41
24.5
41
24.5
41
24.5
41
R1
OD
E
35
30
35
30
35
30
35
30
35
25
30
25
40
25
40
25
40
20
35
20
35
15
30
10
25
15
25
15
25
-10
5
0
15
-15
-5
-10
5
-20
0
-30
-10
-40
-20
-45
-30
-55
-35
-65
-45
-75
-55
weight
[kg]
type
41 06 13
41 07 13
41 08 13
41 09 13
41 09 14
41 10 13
41 10 14
41 11 13
41 11 14
41 13 13
41 13 14
41 14 13
41 14 14
41 16 13
41 16 14
41 17 13
41 17 14
41 19 13
41 19 14
41 22 13
41 22 14
41 24 13
41 24 14
41 26 13
41 26 14
41 27 13
41 27 14
41 32 13
41 32 14
41 36 13
41 36 14
41 37 13
41 37 14
41 41 13
41 41 14
41 42 13
41 42 14
41 46 13
41 46 14
41 51 13
41 51 14
41 56 13
41 56 14
41 61 13
41 61 14
41 66 13
41 66 14
41 71 13
41 71 14
41 76 13
41 76 14
Smax = 100mm
weight
[kg]
Smax = 10mm
sm
ax
t
41 .. 13
14
15
16
max
s=10mm
max
s=100mm
F perm. (T)
250C
350C
Order details:
weld-on lug for pipe
elbows R 1.5 OD
type 41 .. 1.
4.66
Connection plates
Type 77
Connection plates for
coupling pipe clamps
type 43
d3
type 77 09 39 to 77 19 39
B
type
for clamps
loadgroup
d3
weight
[kg]
77 09 39
77 17 39
77 19 39
43 01 19 to 43 09 59
43 10 19 to 43 17 59
43 19 19 to 43 19 59
D-5
3-6
4-7
25
34
46
65
70
90
90
90
105
0.8
1.2
2.4
Order details:
connection plate
type 77.. ..
load group ...
4.67
type 60
d1
type
load
group
77 22 .. to 77 27 ..
77 32 .. to 77 37 ..
77 41 .. to 77 46 ..
77 51 .. to 77 56 ..
77 61 .. to 77 91 ..
77 97 .. to 77 T4 ..
5-10
5-30
6-30
7-50
7-50
7-50
d1
min
max
33
33
40
45
45
45
60
70
70
90
90
90
Bmax
weight
[kg]
135
140
140
200
190
190
180
225
275
300
325
390
10-23
11-32
16-52
30-75
31-78
47-81
type
49 00 01
49 00 01
49 00 01
49 00 01
49 00 01
49 00 01
49 00 02
49 00 02
49 00 02
49 00 02
49 00 02
49 00 03
49 00 04
49 00 05
49 01 11 to 49 17 11
49 01 12 to 49 14 12
49 01 25 to 49 11 25
49 01 35 to 49 06 35
49 01 45 to 49 11 45
49 01 55 to 49 09 55
49 19 13 to 49 32 13
49 16 14 to 49 32 14
49 13 25 to 49 32 25
49 07 35 to 49 32 35
49 13 45 to 49 32 45
49 36 13 to 49 51 45
49 56 13 to 49 91 45
49 97 13 to 49 T4 45
35
35
35
35
35
35
55
55
55
55
55
80
110
115
15
15
15
15
15
15
32
32
32
32
32
45
50
50
23
23
23
23
23
23
35
35
35
35
35
55
80
85
8
8
8
8
8
8
17
17
17
17
17
22
22
22
8
8
8
8
8
8
12
12
12
12
12
15
20
25
wt./pair
[kg]
3.0
3.0
3.0
3.0
3.0
3.0
4.0
4.0
4.0
4.0
4.0
5.0
7.0
8.0
0.1
0.1
0.1
0.1
0.1
0.1
0.3
0.3
0.3
0.3
0.3
0.7
1.5
1.9
Order details:
lift-off restraint
type 49 00 ..
4.68
Type 42 .. 17
2 Delivery condition
Type 42 .. .9
3 Installation
3.1 Horizontal clamp
Type 42
This clamp is used as a horizontal clamp in
connection with threaded eye nut type 60.
When tightening the bolts, care must be
taken that the clamp halves are parallel to
each other. The bolts are to be secured with
lock nuts.
Installation of type 44 for temperatures over 600C
Type 43
Type 43
Connection is made with this horizontal clamp
3.2 Riser clamps
via a separate connection bolt with a threaded
Type 45
eye nut type 60. The bolts must be secured
When installing these clamps care must be
with the cotter pins provided; otherwise protaken to place the spacers supplied onto the
ceed as with type 42.
bolts between the clamp halves. The bolts are
then tightened and locked. The clamp is hung
Type 44, U-bolt/ strap for temperatures
up via the outer support bolts, which are secup to 600C
ured with washers and cotter pins. The specThese clamps consist of an upper section with
ified height of the clamp is set by tightening
a connecting lug and, depending on load and
the suspended parts and creating a force-and
temperature range, a U-bolt with an inlay plate
formfitting connection with the shear lugs.
or a flat steel strap as lower section. For
installation, remove the pre-assembled lower
part by loosening the locking nuts or removing the connection bolts. The upper section
is seated on the piping and the lower one
inserted and held by tightening the U-bolt or
flat steel strap. After alignment of the clamp
the bolts are to be firmly tightened. The
U-bolts are secured with lock nuts and the
flat steel straps with tab washers under the
Riser clamp type 45 with connection components
hexagon nuts.
Type 44 for temperatures over 600C
These clamps consist of an upper section
with a connection lug and restrainer and
a flat steel strap as lower part.
4.69
Type 46
This riser clamp is supplied in single parts
sealed in plastic shrink wrap.
For installation it is best to first fit the front
plates into the suspended parts. These parts
should be tightened at the lowest level, then
both side plates can be attached one after
another. In the case of large clamps, the
opposite side must hereby be temporarily
propped up.
4
Riser clamp type 46 with
connection components
Type 46
Type 48
4.70
2 Delivery condition
Clamp bases for smaller pipe
diameters type 49 .. .1, 49 .. .2
3 Installation
Type 49 .. .1 and 49 .. .2
Type 49
LISEGA clamp bases are slidable supports that
are fastened to pipe systems by clamping
tension. On installation it is essential that the
whole clamp base bottom lies flush and can
slide unobstructed over the given stretches.
Clamp bases for larger pipe
diameters type 49 .. .3, .. .4, .. .5
4.71
Type 49 .. .3, 4
Type 49 .. .3, 4, 5
5
PRODUCT
GROUP
Page
5
0
1
2
3
4
PRODUCT
GROUP
6
7
8
9
5.0
Special pipe saddle type 54 with double cylinder roller bearing type 53 and lift-off restraints type 55
5.1
Roller bearings
The roller bearings can be fastened with
simple bolted connections or welded to the
supporting surface. In all cases the whole
base plate must lie flush on the surface.
Pipe saddles
Lift-off restraints
maintenance-free operation
5.2
Roller bearings
Type 51, 52
Cylinder roller bearings
type 51 08 19 to 51 35 19
A1
F
Surface:
hot dip galvanized
A2
Order details:
cylinder roller bearing
type 51 .. 19
type
load FN
[kN]
A1
A2
weight
[kg]
51 08 19
51 16 19
51 35 19
8
16
35
90
120
145
70
100
120
80
100
130
50
60
85
35
55
60
60
75
95
20
24
26
10
12
14
5
6
10
1.2
2.4
5.5
G
x
C
s
E = 1.064 x R + x
load FN
[kN]
type
Order details:
double taper roller bearing
type 52 .. 19
52
52
52
52
04
08
16
35
Surface:
hot dip galvanized
A
F
19
19
19
19
4
8
16
35
R
27
84
110
136
100
130
165
230
105
135
165
230
90
100
120
160
70
85
100
135
weight
[kg]
55
75
90
130
70
75
90
120
20
20
24
26
10
10
12
14
4
6
8
12
54
64
74
102
1.8
3.3
5.4
14.0
E
min. max.
83
153
191
247
160
202
250
347
A
F
a
travel 50mm
E = 1.064 x R + x
Order details:
double taper roller bearing
(laterally movable)
type 52 .. 29
5.3
type
52
52
52
52
04
08
16
35
29
29
29
29
Surface:
hot dip galvanized
load FN
[kN]
4
8
16
35
R
27
84
110
136
A
100
130
165
230
155
90
185 100
215 120
280 160
C
70
85
100
135
E
min. max.
83
153
191
247
160
202
250
347
weight
[kg]
105
120
140
180
70
75
90
120
20
20
24
26
10
10
12
14
4
6
8
12
54
64
74
102
2.0
3.6
6.0
15.5
Double cylinder
rollers bearing
type 53 08 19 to 53 12 19
Surface:
hot dip galvanized
A2
a
F
A1
type
53
53
53
53
53
08
16
35
60
12
19
19
19
19
19
load FN
[kN]
8
16
35
60
120
R
30
85
175
250
400
190
310
440
520
675
E
min. max.
A1
A2
210
310
420
490
620
190
285
370
430
525
80
100
130
150
180
65
90
110
135
165
72
135
240
329
495
242
375
520
615
785
140 60
230 75
320 90
370 100
460 115
weight
[kg]
20
24
26
31
31
10
12
14
18
22
5
6
10
12
18
40
45
53
63
70
2.5
5.5
14.0
23.0
48.0
E = 1.064 x R + x
Order details:
double cylinder roller bearing
type 53 .. 19
Double cylinder roller
bearings (laterally movable)
type 53 08 29 to 53 12 29
Surface:
hot dip galvanized
C
A + travel s
type
53
53
53
53
53
08
16
35
60
12
29
29
29
29
29
E
load FN
[kN]
min. max.
8
16
35
60
120
30 190
85 310
175 440
250 520
400 675
260
350
475
530
700
210
300
410
465
635
50
50
60
70
80
10
12
14
18
23
72
135
240
329
495
242
375
520
615
785
F
145
160
215
250
315
165 65
185 90
245 110
290 130
360 160
60
75
100
120
145
5
5
6
8
10
40
45
53
63
70
weight [kg]
for s = + per
100mm 100mm
6
10
23
35
70
0.6
0.6
1.0
1.0
1.7
E = 1.064 x R + x
Travel s = 100600mm.
Middle fixed point from
travel s = 300mm.
Order details:
double cylinder roller
bearing (laterally movable)
type 53 .. 29
with s = mm
5.4
OD
60
from
OD 508
R
up to
OD 406.4
Surface:
weldable primer
60
Order details:
weld-on pipe saddle
type 54 .. 19
R = mm
type
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
06
08
09
11
14
17
19
22
27
32
36
41
51
61
71
81
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
load FN
[kN]
OD
1.4
1.4
1.4
1.8
4.0
4.0
5.0
8.0
12
20
20
38
50
65
100
120
60.3
76.1
88.9
114.3
139.7
168.3
193.7
219.1
273.0
323.9
355.6
406.4
508.0
609.6
711.2
812.8
L=300
R
80
90
95
110
120
135
150
160
190
215
230
255
325
375
430
480
180
190
195
210
220
235
250
260
290
315
330
355
415
465
520
570
3.0
3.0
3.0
3.0
3.0
3.0
3.0
4.0
4.0
4.0
4.0
5.0
5.0
5.0
6.0
6.0
3
3
3
3
4
5
5
6
10
12
12
15
10
12
15
20
weight
[kg]
1.4
1.5
1.5
1.5
2.0
3.0
3.0
4.0
6.7
9.6
10
13
10
12
16
19
3.5
3.7
3.8
4.0
5.0
6.5
6.8
8.0
13.5
18
18
25
16
21
26
33
Surface:
hot dip galvanized
OD
from
OD 508
up to
OD 406.4
OD
60
60
L=300
Order details:
pipe saddle with clamps
type 54 .. 29
R = mm
5.5
type
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
06
08
09
11
14
17
19
22
27
32
36
41
51
61
71
81
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
29
load FN
[kN]
OD
1.4
1.4
1.4
1.8
4.0
4.0
5.0
8.0
12
20
20
38
50
65
100
120
60.3
76.1
88.9
114.3
139.7
168.3
193.7
219.1
273.0
323.9
355.6
406.4
508.0
609.6
711.2
812.8
R
80
90
95
110
120
135
150
160
190
215
230
255
325
375
430
480
180
190
195
210
220
235
250
260
290
315
330
355
415
465
520
570
40
40
40
50
50
50
50
50
60
60
60
70
70
90
90
90
3
3
3
3
4
5
5
6
10
12
12
15
10
12
15
20
weight
[kg]
2.5
2.8
3.1
5.0
6.0
7.0
8.0
9.0
15
19
21
30
32
63
75
84
4.8
5.8
6.0
7.0
9.0
12
13
15
20
26
30
40
38
72
86
98
OD
L=300
90
type
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
54
06
08
09
11
14
17
19
22
27
32
36
41
51
61
71
81
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
39
load FN
[kN]
OD
weight
[kg]
0.8
0.8
1.2
1.5
4.0
4.0
5.0
8.0
10
15
20
35
40
60
80
100
60.3
76.1
88.9
114.3
139.7
168.3
193.7
219.1
273.0
323.9
355.6
406.4
508.0
609.6
711.2
812.8
34
41
48
62
75
90
102
116
143
170
188
214
264
317
370
421
3
3
5
5
5
5
5
6
6
8
10
10
10
12
15
15
1.7
2.0
2.6
4.7
5.4
5.9
6.6
7.5
11
14
16
24
28
56
68
75
Lift-off restraints
type 55 08 19 to 55 12 19
OD
R
Surface:
hot dip galvanized
B
L=300
type
55
55
55
55
55
08
16
35
60
12
19
19
19
19
19
compatible with
roller bearing, type
53
53
53
53
53
08
16
35
60
12
19
19
19
19
19
Order details:
pipe saddle with clamps
type 54 .. 39
226
335
455
560
700
80
100
130
150
180
R
30
85
175
250
400
190
310
440
520
675
Order details:
lift-off restraint
type 55 .. 19
for special pipe saddles
type 54 .. .9
R = mm
5.6
LISEGA insulated pipe supports are standardized and designed according to recognized
international technical codes and standards.
They cover pipe sizes ranging from OD 21.3mm
to OD 965.2mm, with insulation thicknesses
from 25mm to 250mm. The supports are made
from materials suitable for the specified loads
and temperatures (temperature of medium as
low as -196C).
Insulating material
The material of the insulated standard pipe
supports is made from fire-retarding polyurethane foam of high density (HD-PUF) and
forms an integral part of the piping insulation.
insulation
thickness
[mm]
insulation
level thickness [mm]
80
40 / 40
100
50 / 50
130
50 / 40 / 40
150
50 / 50 / 50
180
50 / 80 / 50
200
50 / 100 / 50
250
75 / 100 / 75
5.7
Insulation foam
with thicknesses of
80mm to 100mm
are single layer with
an extended step at
either side. For type 56,
insulation foam thicknesses of 130mm and
higher are supplied as double-layer with two
steps. To achieve load transmission for axial
stop type 57, the HD-PUF cradles are designed
as single-layers.
Both single-layer and double-layer HD-PUF
insulations have stepped longitudinal joints.
The size of these joints must be adjusted
during installation to a specified gap dimension to ensure a clamping force from the
insulated pipe support on the piping. Once
installed the longitudinal gaps are then filled
with a flexible insulating foam. The clamping force, which is applied by means of disc
spring bolting, prevents relative movement
between pipe support and piping.
Special advantages of
HIPAC insulated pipe supports
5
Finite element analysis
of a special design
Insulated standard
pipe support type 57
5.8
Type 56 .. ..
Type 56 .. .. -G2a
Design
Special design
Type 56 is a conventional insulated pipe support and functions as a slide or guide support.
type 57 is similar to type 56 but serves as an
axial stop that absorbs increased axial loads by
means of thrust rings. The thrust rings on the
piping consist of two half-rings which are welded together at site to form a single ring. The
rings, which are movable on the piping, are
fixed by means of shear lugs welded onto the
pipe.
Type 56 .. .. -G2p
Type 56 .. .. -G3
Type 56 .. .. -G4
5.9
5
Suspension with cryogenic pipe clamps
5.10
Weld-on supports
Type 57
Weld-on pipe shoes made
from T/U profiles
type 57 .. 11 and 57 .. 12
OD
5-T-16
Material: S235JR
OD
Type designation:
57 .. 11 (T Shoe)
57 .. 12 (U Shoe)
min 50
min 50
B
Order details:
weld-on pipe shoes
type 57 .. 1.
5.11
type
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
57
03
03
03
03
03
07
07
07
07
13
13
13
13
13
13
24
24
24
24
24
36
36
36
42
42
42
51
51
61
61
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
load F [kN]
at 80C
OD
1.0
1.0
1.0
1.0
1.0
1.5
1.5
1.5
1.5
2.0
2.0
2.0
2.0
2.0
2.0
6.0
6.0
6.0
6.0
6.0
8.0
10
10
10
10
12
15
15
20
20
21.3
26.9
33.7
42.4
48.3
60.3
73.0
76.1
88.9
108.0
114.3
133.0
139.7
159.0
168.3
193.7
219.1
244.5
267.0
273.0
323.9
355.6
368.0
406.4
419.0
457.2
508.0
558.8
609.6
660.4
100
100
100
100
100
150
150
150
150
150
150
150
150
150
150
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
B
70
70
70
70
70
70
70
70
70
100
100
100
100
100
100
100
100
100
100
100
160
160
160
200
200
200
240
240
300
300
E
81
83
87
91
94
100
107
108
115
154
157
167
170
180
184
135
150
163
175
178
210
226
233
255
262
283
312
340
370
400
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
weight
[kg]
0.8
0.8
0.8
0.8
0.8
1.2
1.2
1.2
1.2
2.5
2.5
2.5
2.5
2.5
2.5
2.7
2.7
2.7
2.7
2.7
4.7
4.7
4.7
6.3
6.3
6.3
8.3
8.3
11.6
11.6
Emax
250
250
250
250
250
250
250
250
250
300
300
300
300
300
300
300
300
300
300
300
300
350
350
350
350
350
350
350
350
350
350
400
400
400
400
400
400
450
450
450
450
500
500
500
500
550
550
550
600
600
650
650
700
1000
1000
1100
1000
1100
1000
1100
1000
1100
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1200
1200
1200
1200
1200
1200
1200
1200
1250
1250
1250
1250
1250
1250
1300
1300
1300
1300
1300
1300
1350
1350
1350
1350
1400
1400
1450
1450
1500
1550
Emin
Dxs
A
Type 58 .. 11
Type 58 .. 12
Dxs
N
24
30
30
37
37
38
38
44
44
54
54
57
57
67
67
70
70
80
80
84
84
97
97
110
110
122
122
134
134
137
137
162
162
178
178
184
184
203
203
210
210
229
229
254
254
279
279
305
330
356
381
406
457
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
3.0
5.0
3.0
5.0
5.0
7.0
5.0
7.0
7.0
5.0
7.0
5.0
7.0
5.0
7.0
5.0
7.0
5.0
5.0
7.0
5.0
7.0
5.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
a
a
b
a
b
a
b
a
b
b
c
b
c
b
c
c
d
c
d
c
d
d
e
d
e
d
e
e
f
e
f
f
g
f
g
f
g
f
g
f
g
g
h
g
h
g
h
h
h
h
h
h
h
4.5
4.5
5.0
4.5
5.0
4.5
5.0
4.5
5.0
5.0
7.0
5.0
7.0
5.0
7.0
7.0
5.6
7.0
5.6
7.0
5.6
5.6
8.8
5.6
8.8
5.6
8.8
8.8
10
8.8
10
10
8.0
10
8.0
10
8.0
10
8.0
10
8.0
8.0
10
8.0
10
8.0
10
10
10
10
10
10
10
A
150
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
75
33.7
33.7
48.3
33.7
48.3
33.7
48.3
33.7
48.3
48.3
73.0
48.3
73.0
48.3
73.0
73.0
88.9
73.0
88.9
73.0
88.9
88.9
114.3
88.9
114.3
88.9
114.3
114.3
139.7
114.3
139.7
139.7
219.1
139.7
219.1
139.7
219.1
139.7
219.1
139.7
219.1
219.1
323.9
219.1
323.9
219.1
323.9
323.9
323.9
323.9
323.9
323.9
323.9
t
48.3
60.3
60.3
73.0
73.0
76.1
76.1
88.9
88.9
108.0
108.0
114.3
114.3
133.0
133.0
139.7
139.7
159.0
159.0
168.3
168.3
193.7
193.7
219.1
219.1
244.5
244.5
267.0
267.0
273.0
273.0
323.9
323.9
355.6
355.6
368.0
368.0
406.4
406.4
419.0
419.0
457.2
457.2
508.0
508.0
558.8
558.8
609.6
660.4
711.2
762.0
812.8
914.4
stanchions
type
(L)
58 05 .1
58 06 .1
58 06 .2
58 07 .1
58 07 .2
58 08 .1
58 08 .2
58 09 .1
58 09 .2
58 10 .1
58 10 .2
58 11 .1
58 11 .2
58 13 .1
58 13 .2
58 14 .1
58 14 .2
58 16 .1
58 16 .2
58 17 .1
58 17 .2
58 19 .1
58 19 .2
58 22 .1
58 22 .2
58 24 .1
58 24 .2
58 26 .1
58 26 .2
58 27 .1
58 27 .2
58 32 .1
58 32 .2
58 36 .1
58 36 .2
58 37 .1
58 37 .2
58 41 .1
58 41 .2
58 42 .1
58 42 .2
58 46 .1
58 46 .2
58 51 .1
58 51 .2
58 56 .1
58 56 .2
58 61 .1
58 66 .1
58 71 .1
58 76 .1
58 81 .1
58 91 .1
Dxs
OD
OD
(L)
type
OD
Type 58 .. 21
Type 58 .. 22
Order details:
stanchion for
horizontal piping
type 58 .. .., E = ...mm
5.12
(L)
t
Dxs
A
Type 58 .. 13
Type 58 .. 14
OD
(L)
75
A
t
150
Dxs
Type 58 .. 23
Type 58 .. 24
Order details:
stanchion for short radius elbows R DA
type 58 .. .., E = ...mm
5.13
type
OD
58 05 .3
58 06 .3
58 06 .4
58 07 .3
58 07 .4
58 08 .3
58 08 .4
58 09 .3
58 09 .4
58 10 .3
58 10 .4
58 11 .3
58 11 .4
58 13 .3
58 13 .4
58 14 .3
58 14 .4
58 16 .3
58 16 .4
58 17 .3
58 17 .4
58 19 .3
58 19 .4
58 22 .3
58 22 .4
58 24 .3
58 24 .4
58 26 .3
58 26 .4
58 27 .3
58 27 .4
58 32 .3
58 32 .4
58 36 .3
58 36 .4
58 37 .3
58 37 .4
58 41 .3
58 41 .4
58 42 .3
58 42 .4
58 46 .3
58 46 .4
58 51 .3
58 51 .4
58 56 .3
58 56 .4
58 61 .3
58 66 .3
58 71 .3
58 76 .3
58 81 .3
58 91 .3
48.3
60.3
60.3
73.0
73.0
76.1
76.1
88.9
88.9
108.0
108.0
114.3
114.3
133.0
133.0
139.7
139.7
159.0
159.0
168.3
168.3
193.7
193.7
219.1
219.1
244.5
244.5
267.0
267.0
273.0
273.0
323.9
323.9
355.6
355.6
368.0
368.0
406.4
406.4
419.0
419.0
457.2
457.2
508.0
508.0
558.8
558.8
609.6
660.4
711.2
762.0
812.8
914.4
Dxs
33.7
33.7
48.3
33.7
48.3
33.7
48.3
33.7
48.3
48.3
73.0
48.3
73.0
48.3
73.0
73.0
88.9
73.0
88.9
73.0
88.9
88.9
114.3
88.9
114.3
88.9
114.3
114.3
139.7
114.3
139.7
139.7
219.1
139.7
219.1
139.7
219.1
139.7
219.1
139.7
219.1
219.1
323.9
219.1
323.9
219.1
323.9
323.9
323.9
323.9
323.9
323.9
323.9
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
4.5
4.5
5.0
4.5
5.0
4.5
5.0
4.5
5.0
5.0
7.0
5.0
7.0
5.0
7.0
7.0
5.6
7.0
5.6
7.0
5.6
5.6
8.8
5.6
8.8
5.6
8.8
8.8
10
8.8
10
10
8.0
10
8.0
10
8.0
10
8.0
10
8.0
8.0
10
8.0
10
8.0
10
10
10
10
10
10
10
stanchions
type
a
a
b
a
b
a
b
a
b
b
c
b
c
b
c
c
d
c
d
c
d
d
e
d
e
d
e
e
f
e
f
f
g
f
g
f
g
f
g
f
g
g
h
g
h
g
h
h
h
h
h
h
h
Emin
Emax
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
3.0
5.0
3.0
5.0
5.0
7.0
5.0
7.0
7.0
5.0
7.0
5.0
7.0
5.0
7.0
5.0
7.0
5.0
5.0
7.0
5.0
7.0
5.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
10
10
10
15
15
15
15
15
15
15
15
20
20
20
20
25
25
25
25
30
30
30
30
35
35
35
35
40
40
45
45
50
50
40
40
45
45
50
50
50
50
55
55
60
60
65
65
70
80
85
90
95
110
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
300
300
300
300
300
300
300
300
300
300
300
300
300
300
350
350
350
350
350
350
350
350
350
350
350
350
400
400
400
400
450
450
450
450
450
450
500
550
1000
1000
1100
1000
1100
1000
1100
1000
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1100
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1200
1000
1000
1050
1000
1050
1000
1050
1000
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1050
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
950
950
950
950
950
900
Dxs
A
Type 58 .. 15
Type 58 .. 16
OD
Dxs
E
200
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
300
300
250
250
250
250
300
300
300
300
300
300
350
350
350
350
400
400
450
450
500
550
0
0
0
5
5
0
0
5
5
5
5
10
10
10
10
15
15
15
15
15
15
20
20
25
25
25
25
30
30
30
30
40
40
65
65
65
65
70
70
75
75
80
80
90
90
100
100
110
115
125
135
145
160
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
5.0
3.0
5.0
3.0
5.0
5.0
7.0
5.0
7.0
7.0
5.0
7.0
5.0
7.0
5.0
7.0
5.0
7.0
5.0
5.0
7.0
5.0
7.0
5.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
OD
a
a
b
a
b
a
b
a
b
b
c
b
c
b
c
c
d
c
d
c
d
d
e
d
e
d
e
e
f
e
f
f
g
f
g
f
g
f
g
f
g
g
h
g
h
g
h
h
h
h
h
h
h
Emax
A
150
4.5
4.5
5.0
4.5
5.0
4.5
5.0
4.5
5.0
5.0
7.0
5.0
7.0
5.0
7.0
7.0
5.6
7.0
5.6
7.0
5.6
5.6
8.8
5.6
8.8
5.6
8.8
8.8
10
8.8
10
10
8.0
10
8.0
10
8.0
10
8.0
10
8.0
8.0
10
8.0
10
8.0
10
10
10
10
10
10
10
Emin
75
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
t
33.7
33.7
48.3
33.7
48.3
33.7
48.3
33.7
48.3
48.3
73.0
48.3
73.0
48.3
73.0
73.0
88.9
73.0
88.9
73.0
88.9
88.9
114.3
88.9
114.3
88.9
114.3
114.3
139.7
114.3
139.7
139.7
219.1
139.7
219.1
139.7
219.1
139.7
219.1
139.7
219.1
219.1
323.9
219.1
323.9
219.1
323.9
323.9
323.9
323.9
323.9
323.9
323.9
48.3
60.3
60.3
73.0
73.0
76.1
76.1
88.9
88.9
108.0
108.0
114.3
114.3
133.0
133.0
139.7
139.7
159.0
159.0
168.3
168.3
193.7
193.7
219.1
219.1
244.5
244.5
267.0
267.0
273.0
273.0
323.9
323.9
355.6
355.6
368.0
368.0
406.4
406.4
419.0
419.0
457.2
457.2
508.0
508.0
558.8
558.8
609.6
660.4
711.2
762.0
812.8
914.4
stanchions
type
58 05 .5
58 06 .5
58 06 .6
58 07 .5
58 07 .6
58 08 .5
58 08 .6
58 09 .5
58 09 .6
58 10 .5
58 10 .6
58 11 .5
58 11 .6
58 13 .5
58 13 .6
58 14 .5
58 14 .6
58 16 .5
58 16 .6
58 17 .5
58 17 .6
58 19 .5
58 19 .6
58 22 .5
58 22 .6
58 24 .5
58 24 .6
58 26 .5
58 26 .6
58 27 .5
58 27 .6
58 32 .5
58 32 .6
58 36 .5
58 36 .6
58 37 .5
58 37 .6
58 41 .5
58 41 .6
58 42 .5
58 42 .6
58 46 .5
58 46 .6
58 51 .5
58 51 .6
58 56 .5
58 56 .6
58 61 .5
58 66 .5
58 71 .5
58 76 .5
58 81 .5
58 91 .5
Dxs
(L)
OD
(L)
type
Type 58 .. 25
Type 58 .. 26
Order details:
stanchion for long radius elbows
R 1.5 OD
type 58 .. .., E = ...mm
5.14
Stanchions
Type 58
Field weld
The weld seam stress
amounts to max. 50N/mm2
for the specified weld seam
thickness and permissible loads.
Type designation:
58 .. 1.
58 .. 2.
stanchion
telescopic
stanchion
Table data A x t.
The permissible loading of
pipe
type
a
b
c
d
e
f
g
h
Dxs
33.7
48.3
73.0
88.9
114.3
139.7
219.1
323.9
x
x
x
x
x
x
x
x
Axt
4.5
5.0
7.0
5.6
8.8
10
8.0
10
90
115
130
150
190
215
305
405
x
x
x
x
x
x
x
x
10
10
10
10
12
15
20
25
1.9
3.7
7.9
11
25
35
69
185
1.1
2.3
5.0
7.1
16.0
22.5
43.5
113.0
1.3
2.1
3.5
4.0
7.7
11.7
22.1
45.7
1.8
4.0
4.4
6.6
10.8
15.8
26.8
54.1
+ per
100mm
0.32
0.53
1.1
1.2
2.3
3.2
4.2
7.7
Permissible load in dependence on length of stanchion for slide bearing or fixed point
F/Fmax
Materials:
base plate S235JR
S355J2
stanchion P235GH
Surface protection:
weldable primer
[mm]
5.15
PRODUCT
GROUP
Connection components
Contents
Page
6
0
1
2
3
4
5
PRODUCT
GROUP
7
8
9
6.0
Threaded connections
Type 60 to 64
Precision-fit threads, reliable material properties
and design with sufficient
load reserves are prerequisites for the reliability
of the whole load chain.
The connections in product group 6 are specially shaped bolting components to connect
the connecting rods to other support components. They connect components in the load
chains with their counterparts, such as lugs,
U-bolts or eye plates.
The connections in product group 6 form an
independent group within the modular system
and were specially designed for optimum use
as pipe support components.
They are largely drop-forged and, except for
turnbuckle type 62, so designed that they
enable a little length regulation despite low
installation heights.
Turnbuckle type 62
6.1
: 60 .9 04-HT;
(60 D9 04-HT
Threaded clevises
with pin
: 61 .9 04-HT;
(61 D9 04-HT
Turnbuckles : 62 .9 04-HT;
(62 D9 04-HT
Rod couplings : 64 .9 04-HT;
(64 D9 04-HT
to 60 99 04-HT)
to 61 99 04-HT)
to 62 99 04-HT)
to 64 99 04-HT)
Eye nuts
type 60 D9 19 to 60 50 12
d3
Material: P250GH
drop-forged.
d2
type
60 D9 19
60 29 12
60 39 12
60 49 12
60 59 12
60 69 12
60 79 12
60 89 12
60 99 12
60 10 12
60 20 12
60 30 12
60 40 12
60 50 12
24
33
44
59
72
88
100
110
120
135
150
160
220
250
40
60
75
90
110
127
140
157
180
200
230
230
250
280
11
15
20
25
30
37
45
52
60
65
70
70
120
140
17
24
30
35
44
50
60
70
80
95
105
110
125
140
G
H
F
d2
d3
weight
[kg]
M10
M12
M16
M20
M24
M30
M36
M42
M48
M56x4
M64x4
M68x4
M72x4
M80x4
13
17
25
29
35
42
47
52
62
62
72
72
82
92
25
40
45
55
65
75
75
85
85
105
130
130
100
120
5
6
10
10
15
17
20
25
30
40
40
40
50
60
15
19
26
35
44
54
62
72
78
80
85
90
110
125
15
20
30
35
45
52
65
72
95
95
100
100
150
160
0.05
0.10
0.20
0.40
0.80
1.20
2.00
2.90
4.70
7.70
8.80
9.30
27.00
45.00
d1
d2
shape-type 61 40 12, 61 50 12
type
61 D9 19
61 29 12
61 39 12
61 49 12
61 59 12
61 69 12
61 79 12
61 89 12
61 99 12
61 10 12
61 20 12
61 30 12
61 40 12
61 50 12
23
33
42
55
65
72
85
100
120
130
155
155
150
165
50
70
80
90
110
130
150
170
180
215
230
230
240
260
11
15
20
25
30
35
40
50
60
65
70
70
80
90
17
25
33
40
46
51
61
72
83
90
110
110
d1 d2
10
12
16
20
24
33
40
45
50
60
70
70
80
90
Order details:
eye nuts
type 60..1.
M10
M12
M16
M20
M24
M30
M36
M42
M48
M56x4
M64x4
M68x4
M72x4
M80x4
35
50
50
55
65
80
90
100
95
120
130
125
130
140
11
12
17
20
22
27
32
37
42
50
60
60
56
64
50
60
70
90
105
125
140
165
185
210
245
245
230
240
25
34
44
57
68
80
93
110
130
150
175
175
150
165
21
24
32
46
53
64
80
90
100
120
150
150
150
180
L
5x9
8x12
11x15
16x21
19x25
19x29
22x36
27x40
33x44
30x45
35x55
35x55
90
110
15
20
30
35
45
50
60
70
85
95
100
105
110
120
weight
[kg] Bolts
0.1
0.2
0.4
1.0
1.6
2.7
4.4
7.2
10.4
14.8
24.4
24.4
42.0
60.0
Order details:
threaded clevises with pin
type 61..1.
6.2
Turnbuckles Type 62
Rod couplings Type 64
Turnbuckles
type 62 D9 19 to 62 50 15
D
X
Material: S23SJR
drop-forged.
L
B
Order details:
turnbuckle
type 62..1.
type
SW
62 D9 19
62 29 12
62 39 19
62 49 19
62 59 19
62 69 12
62 79 12
62 89 12
62 99 12
62 10 15
62 20 15
62 30 15
62 40 15
62 50 15
30
34
42
52
62
74
86
104
130
110
130
140
150
165
125
125
150
170
240
255
295
330
355
300
320
330
390
410
18
21
27
33
39
45
55
63
75
60
70
75
80
90
16
18
24
30
36
46
55
65
75
80
90
100
100
120
d2
M10
M12
M16
M20
M24
M30
M36
M42
M48
M56x4
M64x4
M68x4
M72x4
M80x4
E
35
35
50
60
80
85
95
100
105
80
80
80
90
90
weight
[kg]
45
45
50
55
80
85
100
115
125
110
120
125
150
160
0.15
0.20
0.40
0.70
1.20
1.80
3.00
4.80
7.80
10.00
15.00
18.00
22.00
32.00
weight
[kg]
L
9x 8
11x 9
14x11
17x14
22x17
23x20
28x23
32x27
40x35
80x23
90x28
100x30
100x33
120x37
Rod coupling
type 64 D9 19 to 64 50 15
Material: S235JR
drop-forged.
d2
Order details:
rod coupling
type 64 .. 1.
6.3
type
64 D9 19
64 29 18
64 39 18
64 49 18
64 59 18
64 69 18
64 79 18
64 89 18
64 99 18
64 10 15
64 20 15
64 30 15
64 40 15
64 50 15
34
34
42
52
62
74
86
104
130
110
130
140
150
165
45
45
60
75
90
105
120
150
180
190
220
240
250
280
15
15
20
25
30
35
40
50
60
60
70
75
80
90
21
21
27
32
39
45
55
63
75
80
90
100
100
120
d2
M10
M12
M16
M20
M24
M30
M36
M42
M48
M56x4
M64x4
M68x4
M72x4
M80x4
11x 9
11x 9
14x11
17x14
22x17
23x20
28x23
32x27
40x35
80x23
90x28
100x30
100x33
120x37
0.1
0.1
0.2
0.5
0.7
1.2
1.6
2.6
5.1
7.0
11.0
14.0
15.0
23.0
Connecting rods
Type 63, 65, 66, 67
Application
Length adjustment
Corrosion protection
Rolled threads
Designs
Threaded rods type 67 with continuous threading up to M48 and tie rods type 66 (from M20)
are available in fixed 500mm length increments
in the length range from 500mm up to 3,000mm.
The tie rods have thread lengths of 300mm on
one side and 600mm on the other. The short
thread is for length adjustment, e.g. as a connection for spring and constant hangers. The long
thread is for the fitted length. This can be shortened as required according to the installation
height on site.
Special properties:
Often there is a need to use the connecting members even in areas which are above the standard
range of application and can exposed to with
higher temperatures. For this LISEGA SE offers
products made from the material 21CrMoV57 or
25CrMo4 for hex nuts. The load limits for use up
to 500C correspond to the nominal load of each
load groups.
Standard lengths
Tie rod
Hexagon nut :
Manufacture of threaded
components
66 .. 03-HT;
(66 46 03 to 66 97-HT-03 HT)
63 .9 3. ; (63 D9 39 and
63 19 38 to 63 99 38)
6.4
Order details:
tie rod LR
type 65..1.
L
L2
d2
L1
d
Material:
M10 to M16: S235JR
from M20: S355J2.
right
left
type
65 D1 19
65 21 13
65 31 13
65 41 13
65 51 13
65 61 13
65 71 13
65 81 13
65 91 13
65 10 13
65 20 13
65 30 13
65 40 13
65 50 13
8.75
10.74
14.54
18.20
21.85
27.55
33.15
38.91
44.53
53.22
61.20
65.20
69.20
77.20
d2
M10
M12
M16
M20
M24
M30
M36
M42
M48
M56x4
M64x4
M68x4
M72x4
M80x4
L1
right
L2
left
weight
[kg]
250
250
250
250
350
350
350
450
450
550
550
550
600
600
80
80
80
80
120
120
120
160
160
200
200
200
220
220
130
130
130
130
190
190
190
220
220
270
270
270
300
300
0.1
0.2
0.3
0.5
1.0
1.6
2.4
4.2
5.5
9.6
12.7
14.4
17.7
22.1
Hexagon nuts
type 63 D9 29 to 63 50 28
Stud bolts
type 67 D1 19 to 67 91 13
Material:
M10 to M16: S235JR
from M20: S355J2.
LISEGA threaded
rods should only be
replaced in kind.
type
Order details:
hexagon nut
type 63..2.
6.5
63 D9 29
63 29 28
63 39 28
63 49 28
63 59 28
63 69 28
63 79 28
63 89 28
63 99 28
63 10 28
63 20 28
63 30 28
63 40 28
63 50 28
size
M10
M12
M16
M20
M24
M30
M36
M42
M48
M56x4
M64x4
M68x4
M72x4
M80x4
weight
[kg]
0.01
0.02
0.03
0.06
0.11
0.22
0.39
0.65
0.98
1.40
1.90
2.25
2.60
3.40
type
d2
weight
[kg]
67 D1 19
67 21 13
67 31 13
67 41 13
67 51 13
67 61 13
67 71 13
67 81 13
67 91 13
30
35
50
60
75
90
110
125
145
M10
M12
M16
M20
M24
M30
M36
M42
M48
0.02
0.03
0.07
0.12
0.22
0.42
0.75
1.17
1.77
Order details:
stud bolts
type 67..1.
Material:
M10 to M16: S235JR
from M20: S355J2.
300
d2
L
600
type designation at L=
1500
2000
d2
500
1000
M 10
M 12
M 16
M 20
M 24
M 30
M 36
M 42
M 48
67 D2 19
67 22 13
67 32 13
67 42 13
67 52 13
67 62 13
67 72 13
67 82 13
67 92 13
67 D3 19
67 23 13
67 33 13
67 43 13
67 53 13
67 63 13
67 73 13
67 83 13
67 93 13
67 D5 19
67 25 13
67 35 13
67 45 13
67 55 13
67 65 13
67 75 13
67 85 13
67 95 13
3000
weight
[kg/m]
67 D6 19
67 26 13
67 36 13
66 46 13
66 56 13
66 66 13
66 76 13
66 86 13
66 96 13
67 D7 19
67 27 13
67 37 13
66 47 13
66 57 13
66 67 13
66 77 13
66 87 13
66 97 13
0.5
0.7
1.3
2.0
2.9
4.7
6.8
9.3
12.2
d2
67 D4 19
67 24 13
67 34 13
67 44 13
67 54 13
67 64 13
67 74 13
67 84 13
67 94 13
2500
L1
L2
d2
L
type designation
(L / L1 / L2 please note at order)
d2
M
M
M
M
M
56x4
64x4
68x4
72x4
80x4
66
66
66
66
66
10
20
30
40
50
13
13
13
13
13
weight
[kg/m]
67
67
67
67
67
10
20
30
40
50
13
13
13
13
13
17.5
23.1
26.2
29.5
36.8
Order details:
from M56x4:
threaded rod / tie rod
type 6. .. ..
L = mm
L1 = mm
L2 = mm
6.6
PRODUCT
GROUP
Structural attachments,
trapezes, clamps, slide plates
Page
7
0
1
2
3
4
5
6
PRODUCT
GROUP
8
9
7.0
Product group 7
Connecting components for the direct attachment to the structure and trapezes form part of
product group 7.
The permissible loads for the components correspond to the load table for statically determined
components in the technical specifications, p. 0.6.
For weld-on clevises type 73 well suited for
connection to hollow sections - and weld-on eye
nuts type 75 the specified minimum weld seam
thicknesses must be taken into account. These
are calculated not to exceed a maximum weld
seam stress of 75N/mm2 (load case H). For the
calculations, a force applied conically below 6
was served as the basis.
The weld-on plates type 74 enable use of the
maximum pendulum length in restricted spaces
by means of a plug connection. Here too, a force
applied conically below 6 served as the basis.
type 73
type 74
type 75
The trapeze profiles are protected against corrosion according to LISEGA standard color coating
(see p. 0.10).
All components can on request be supplied with
material certifications.
type 76
type 78
Standardized connection possibilities
7.1
Weld-on clevises
type 73 29 13 to 73 50 12
Material: S355J2
drop-forged.
A
F
H
G
type
73
73
73
73
73
73
73
73
73
73
73
73
73
29
39
49
59
69
79
89
99
10
20
30
40
50
13
13
13
13
12
12
12
12
12
12
12
12
12
d1
K
shape type 73 20 12
to 73 50 12
d1
min. weld
seam
weight
[kg]
40
50
65
75
95
120
120
120
150
170x175
170x175
150x190
180x220
12
16
20
24
33
40
45
50
60
70
70
80
90
35
40
50
60
90
110
120
130
140
150
150
170
195
12
17
20
22
27
32
37
42
50
60
60
56
64
60
70
90
105
125
140
165
185
210
245
245
230
240
34
44
57
68
80
93
110
120
150
165
165
150
165
24
32
46
53
64
80
90
100
120
170
170
150
180
75
75
90
110
3.0
3.0
3.0
3.0
3.5
4.0
5.5
7.5
8.5
9.0
10.5
12.5
13.5
0.3
0.4
1.1
2.1
3.8
6.8
9.2
11.1
18.5
37.0
37.0
38.0
58.0
Order details:
weld-on clevises 73 .. 1.
d3
type
d3
min. weld
seam
75 D1 19
75 21 12
75 31 12
75 41 12
75 51 12
75 61 12
75 71 12
75 81 12
75 91 12
75 10 12
75 20 12
75 30 12
75 40 12
75 50 12
30
35
45
60
65
80
100
120
130
150
170
180
220
250
10.5
12.5
16.5
20.5
24.5
34
41
46
51
61
71
71
81
91
40
45
50
55
60
70
80
90
100
110
120
130
140
150
18
22
28
37
40
50
65
75
80
90
100
110
120
135
6
8
10
12
15
20
25
30
30
40
45
45
50
60
3.0
4.0
4.5
6.0
7.0
8.5
9.5
10.5
13.5
15.5
18.0
20.5
18.5
20.0
weight
[kg]
0.10
0.13
0.24
0.45
0.65
1.25
2.35
3.9
4.6
7.7
10.6
12.6
18.5
27.5
Order details:
weld-on eye plates
type 75 .. 1.
7.2
Weld-on plates
with spherical washers Type 74
B
d4
Weld-on plates
with spherical washers
type 74 D1 19 to 74 50 13
Material spherical washers:
case-hardened steel.
From load group 5: C15
weld-on plate: S235JR.
For s 20: S355J2.
6 6
D
max. F
A
Order details:
weld-on plate with spherical
washer type 74 .. 1.
7.3
type
for
thread
d4
max. F
weight
[kg]
74 D1 19
74 21 13
74 31 13
74 32 13
74 33 13
74 41 13
74 42 13
74 43 13
74 51 13
74 52 13
74 61 13
74 62 13
74 71 13
74 72 13
74 81 13
74 82 13
74 91 13
74 92 13
74 10 13
74 20 13
74 30 13
74 40 13
74 50 13
M10
M12
M16
M16
M16
M20
M20
M20
M24
M24
M30
M30
M36
M36
M42
M42
M48
M48
M56x4
M64x4
M68x4
M72x4
M80x4
60
70
70
95
130
70
95
130
95
130
130
170
130
170
130
170
130
170
225
250
250
300
350
21
24
30
30
30
36
36
36
44
44
56
56
68
68
78
78
92
92
103
120
128
136
152
15
18
25
25
25
30
30
30
35
35
45
45
50
50
59
59
66
66
76
89
95
98
110
10.5
13
17
17
17
21
21
21
25
25
31
31
37
37
43
43
50
50
58
66
70
75
83
12
17
17
22
22
18
23
23
24
24
35
35
37
37
39
39
46
41
47
54
61
61
64
35
40
45
45
45
50
50
50
55
55
60
60
70
70
90
90
120
120
140
150
160
160
180
10
11
15
15
15
18
18
18
21
21
27
27
32
32
37
37
41
41
50
59
64
70
78
15
17
22
22
22
27
27
27
32
32
41
41
50
50
58
58
67
67
79
93
100
107
120
10
15
15
20
20
15
20
20
20
20
30
30
30
30
30
30
35
30
35
40
45
45
45
0.3
0.6
0.6
1.4
2.7
0.6
1.4
2.7
1.4
2.7
4.0
6.8
4.0
6.8
4.0
6.8
4.5
6.8
13.9
19.6
22.0
31.8
43.3
Beam clamps
type 78 21 11 to 78 71 11
A
E
E0
E = E0 t
d3
d3
46
82
11 17
11 21
11 25
11 34
11 41
11 51
80
80
125
125
180
180
55
55
70
type
78
78
78
78
78
78
21
31
41
51
61
71
E0 up to beam width b=
100 125 140 180 220
65
70
65
70
85
95
65
70
90
95
75
80
90
105
100
115
85
90
100
115
100
115
260
300
100
105
130
110
125
110
115
140
110
130
8
10
15
15
20
20
tmax
15
20
25
25
30
30
weight
[kg]
0.8
2.0
6.7
6.8
17.7
18.2
1.6
3.6
8.9
9.5
19.8
20.8
Order details:
beam clamp
type 78 .1 11
beam width b = mm
flange thickness t = mm
80
d4
type
Lmax
d4
79 C2 37
79 D2 37
79 12 37
79 12 37
79 22 37
79 22 37
79 32 37
79 32 37
79 42 37
79 42 37
1000
1000
600
1000
600
1100
600
1200
600
1200
25
25
25
25
30
30
30
30
40
40
40
60
60
70
70
80
80
100
100
130
22
25
25
28
28
32
32
35
38
42
11
11
11
11
14
14
14
14
18
18
0.3
0.46
0.46
0.64
0.64
1.0
1.0
1.5
1.5
2.4
Order details:
trapeze
type 79 .2 37, L = mm
7.4
Trapezes
Type 79
Trapezes
type 79 22 34 to 79 20 34
100
d3
load
group
d3
s
79 22 34
79 32 34
D4
D4
21
21
10
10
79 42 34
34
21
lengthened up to 2400mm
on load reduction of 5%
per 100mm extension.
79 52 34
45
79 62 34
Lmax
1700
1700
20
20
80
80
140
140
19
19
1.7
1.7
12
900
1800
20
40
80
120
140
190
19
31
1.7
2.7
25
18
1400
1800
40
40
120
140
190
200
31
38
2.7
3.2
56
34
20
1250
1800
40
55
140
180
200
230
38
54
3.2
4.4
79 72 34
67
41
25
1400
1800
60
65
180
200
230
250
54
65
4.4
5.1
79 82 34
68
46
25
1250
2400
70
80
200
260
250
310
65
102
5.1
7.6
79 92 34
79
51
30
1800
2400
85
90
260
300
310
350
102
129
7.6
9.2
79 10 34
79 20 34
8 10
9 10
61
61
30
30
2000
1800
95
95
300
300
350
350
129
129
9.2
9.2
Trapeze
type 79 23 39 to 79 93 39
B
d3
d3
Order details:
trapeze
type 79 .. 34, L = mm
Order details:
trapeze
type 79 .3 39, L = mm
7.5
type
79
79
79
79
79
79
79
79
23
33
43
53
63
73
83
93
39
39
39
39
39
39
39
39
load
group
d3
Lmax
D4
D4
35
46
57
68
69
7 10
21
21
25
34
41
46
51
61
1700
1700
1800
1800
1800
1800
2400
2400
40
40
40
60
65
65
95
120
80
80
120
140
180
200
260
300
140
140
190
200
230
250
310
350
40
40
50
60
70
80
90
100
10
10
12
18
20
25
25
30
1.7
1.7
2.7
3.2
4.4
5.1
7.6
9.2
Beam adapters
Type 76
On alterations or extensions of the pipe
systems or steelwork in existing plants,
clamp connections are frequently preferred
to welded connections. Clamp connections
are strictly specified in cases where welding
connections are excluded for safety reasons.
The safety of the clamping effect of such
connections depends essentially on the
nature of the existing contact surfaces and
the prestressing forces applied. The design
of the clamping components used is therefore decisive for a reliable connection.
For the creation of safe and reliable clamp
connections LISEGA offers the beam adapter
system type 76. These components enable
the connection of very different components to
existing steelwork without welding or drilling.
Assembly is simple and timesaving. On tightening, LISEGA beam adapters adjust independently
to the existing beam thickness.
The special support segments are the main feature of the LISEGA beam adapters. Due to their
shape they automatically adapt to any position
and to existing profile angles.
Beam adapters
type 76 D2 11 to 76 42 11
Material: cast iron hot dip
galvanized.
type
76 D2 11
76 22 11
76 32 11
76 42 11
on bolting 8.8
support force tight. torque
[kN]
[Nm] max
2.5
6.0
8.5
15.0
35
70
150
300
d2
Hmin
Hmax
48
57
70
83
24
30
37
46
M10
M12
M16
M20
31
37
44
55
37
45
54
65
t
(clamp thickness)
min
max
3
4
6
6
15
17
20
25
weight
[kg]
0.1
0.2
0.3
0.6
Order details:
beam adapter (without bolt)
type 76 .. 11
bolts for beam adapters,
see p. 7.7.
7.6
Example of connections
with beam adapters
Cross-connection
dimensions
M10
M10
M10
M12
M12
M12
M16
M16
M16
M20
M20
M20
x
x
x
x
x
x
x
x
x
x
x
x
65
80
100
70
90
120
90
120
150
120
150
180
weight [kg]
0.06
0.07
0.08
0.09
0.10
0.12
0.19
0.23
0.27
0.39
0.45
0.51
type
thickness of
inlay plate
76 D2 11
76 22 11
76 32 11
76 42 11
10
24
34
60
10
12
15
18
Profile connection
Order details:
bolt for beam adapter
type 76 .2 11-
7.7
Fz
L= b + 2c
a1
Fx
a2
b
type
76
76
76
76
00
00
00
00
lift-off restraint
type with
lift-off restraint
11
12
13
14
76
76
76
76
00
00
00
00
tightening
torque [Nm]
21
22
23
24
35
70
150
300
Fz
[kN]
Fx
[kN]
1.0
1.7
2.8
4.7
3.5
4.5
6.5
6.5
a1
a2
bmin
30
30
40
40
50
60
80
80
42
50
64
73
40
45
55
65
1.7
2.8
4.9
7.2
0.60
0.95
1.40
1.40
If required, the guides can be supplied with an additional lift-off restraint (width 80mm).
(When ordering also specify clamp base type.)
Fz: the permissible short-duration lift-off load is limited in every case by the permissible
lift-off load of the clamp base. See p. 4.68 for this.
Order details:
lateral guide
type 76 00 1.; b = mm
Order details:
lateral guide with lift-off
restraint
type 76 00 2. 49 .. ..
(clamp base type), b = mm
Cantilever with
beam adapters
type 76 C1 16 to 76 21 16
Material:
cantilever S235JR.
a
t
d4
Lmin = 0 mm
Lmax = b
2 +c
type
tightening
torque [Nm]
axs
bmin
bmax
d4
76 C1 16
76 D1 16
76 11 16
76 21 16
35
70
150
300
40x6
60x6
70x7
80x8
42
50
55
64
300
300
300
300
40
45
55
65
11
11
14
17
25
45
48
55
weight [kg]
tmax for b=100 L=50 + per 100mm
15
17
20
25
0.9
1.5
2.5
3.9
0.35
0.55
0.75
1.00
Order details:
cantilever with beam
adapters type 76 .1 16
b = mm, L = mm
7.8
a
e
d3
L = b
2 +c
Friction value = 0.14
Order details:
cantilever with beam
adapters type 76 .1 17
b = mm, L = mm
type
76 C1 17
76 D1 17
76 11 17
76 21 17
40x6
60x6
70x7
80x8
Example of use:
roller bearing fitted at works
with lateral support plates
7.9
46
55
64
73
c d3 e
E tmax
40
45
55
65
20
20
25
25
11
11
14
14
22
25
28
30
15
17
20
25
weight [kg]
for b = 100
Lmax up to beam width b=
82 100 125 140 180 220 260 300 +per L=100 100mm
120
105
110
145
230
170
140
160
270
200
170
190
310
250
200
235
320
280
230
265
Example of use:
clamp base on trapeze
340
340
290
290
360
360
350
310
380
380
380
330
1.0
1.8
2.8
4.4
0.35
0.55
0.75
1.00
Slide plates
Type 70
Application and field of use
The pipe systems resting on pipe bearings are
subject to displacement as a result of thermal
expansion. This displacement must be permitted to prevent unacceptable stresses that could
damage the piping system. Furthermore, the
slight friction caused by these movements is
reduced by inserting slide plates between the
clamp base and supporting framework.
LISEGA slide plates consist of different low-friction materials for different temperature ranges.
During the planning phase the reduction of fric- For use at a constant temperature up to 180C
tion forces is extremely important. Since friction (at the bottom of the clamp base) the standard
PTFE slide plate is recommended. For temperforces can represent considerable additional
forces to the operational loads, they are usually atures above 180C to a maximum of 350C a
distributed into the supporting framework (buil- special high-temperature material is used.
ding structure or secondary steelwork) by the
use of low friction materials/surfaces.
Advantages of the low-friction materials
By lowering friction forces the dimensioning of
building structures and secondary steelwork can
be, under the aspect of cost saving, reduced.
Also the reaction forces in the pipe statics.
Slide plates are commonly used in all pipe systems in industrial processes / chemical plants, in
the power station field, in liquefied gas transport
or in district heating pipe systems.
7.10
The counterface is a stainless steel plate. Optionally the stainless steel plate, that must be
ordered separately, can be welded to carbon
steel support plate or it is attached to the bottom of the clamp base in the factory and can
be used immediatly.
1
z
y
x
2
standard PTFE
low-friction material
high temperature
low-friction material
7.11
150C
180C
280C
300C
350C
0.1
0.1 0.18
0.25
load%
nom. load
travel range 1
travel range 2
travel range 3
type
7.12
Order details:
slide plate to weld-on
type 70 .. 1.
type
70 11 1.
70 12 1.
70 13 1.
70 14 1.
70 16 1.
70 17 1.
70 18 1.
70 22 1.
70 23 1.
70 24 1.
70 26 1.
70 27 1.
70 28 1.
70 33 1.
70 34 1.
70 36 1.
70 37 1.
70 38 1.
70 44 1.
70 46 1.
70 47 1.
70 48 1.
Order details:
slide plate to weld-on
type 70 .. 1.
7.13
13
22
37
52
82
105
135
59
98
138
219
280
360
163
228
358
465
595
318
498
645
825
7
13
22
31
49
62
80
36
60
84
132
168
216
99
138
216
276
354
192
300
384
492
25
40
70
100
160
205
265
120
200
280
440
560
720
330
460
720
920
1180
640
1000
1280
1640
sliding surface
weight
[kg]
50
50
50
50
50
50
50
100
100
100
100
100
100
150
150
150
150
150
200
200
200
200
50
100
150
200
300
390
490
100
150
200
300
390
490
150
200
300
390
490
200
300
390
490
10
10
10
10
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
40
30 x 80
30 x 130
30 x 180
30 x 280
2 x 30 x 180
2 x 30 x 230
80 x 80
80 x 130
80 x 180
80 x 280
2 x 80 x 180
2 x 80 x 230
130 x 130
130 x 180
130 x 280
2 x 130 x 180
2 x 130 x 230
180 x 180
180 x 280
2 x 180 x 180
2 x 180 x 230
0.2
0.3
0.4
0.6
0.8
1.0
1.3
0.7
1.0
1.3
1.9
2.5
3.1
1.4
1.9
2.7
3.6
4.4
2.4
3.6
5.4
6.8
50
85
100
130
170
200
10
12
12
12
12
12
type
70
70
70
70
70
70
05
08
10
13
17
20
1.
1.
1.
1.
1.
1.
7
19
30
57
106
152
25
65
100
190
350
505
sliding surface
40
65
80
110
150
180
weight
[kg]
0.1
0.4
0.5
0.9
1.4
1.9
A
6
G
B
F
C
11
12
13
14
16
17
18
22
23
24
26
27
28
33
34
36
37
38
44
46
47
48
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
2.
13
22
37
52
82
105
135
59
98
138
219
280
360
163
228
358
465
595
318
498
645
825
7
13
22
31
49
62
80
36
60
84
132
168
216
99
138
216
276
354
192
300
384
492
25
40
70
100
160
205
265
120
200
280
440
560
720
330
460
720
920
1180
640
1000
1280
1640
50
50
50
50
50
50
50
100
100
100
100
100
100
150
150
150
150
150
200
200
200
200
50
100
150
200
300
390
490
100
150
200
300
390
490
150
200
300
390
490
200
300
390
490
bore
holes
weight
[kg]
100
100
100
100
100
100
100
150
150
150
150
150
150
200
200
200
200
200
250
250
250
250
75
75
75
75
75
75
75
125
125
125
125
125
125
175
175
175
175
175
225
225
225
225
0
60
100
150
250
300
350
60
100
150
250
300
350
100
150
250
300
350
150
250
300
350
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
12
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
0.5
1.0
1.5
2.0
2.9
3.8
4.7
1.7
2.5
3.3
5.0
6.4
8.1
3.6
4.7
7.0
9.1
11.4
6.1
9.0
11.7
14.7
H sliding surface
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
40
30 x 80
30 x 130
30 x 180
30 x 280
2 x 30 x 180
2 x 30 x 230
80 x 80
80 x 130
80 x 180
80 x 280
2 x 80 x 180
2 x 80 x 230
130 x 130
130 x 180
130 x 280
2 x 130 x 180
2 x 130 x 230
180 x 180
180 x 280
2 x 180 x 180
2 x 180 x 230
TK
Order details:
slide plate for bolting
type 70 .. 2.
(3x120)
DA
type
70
70
70
70
70
70
05
08
10
13
17
20
2.
2.
2.
2.
2.
2.
7
19
30
57
106
152
25
65
100
190
350
505
DA
50
85
100
130
170
200
90
125
150
180
220
260
22
22
22
22
22
22
sliding surface TK
40
65
80
110
150
180
70
105
125
155
195
230
weight
[kg]
12
12
14
14
14
18
0.5
1.2
1.6
2.5
3.9
5.4
Order details:
slide plate for bolting
type 70 .. 2.
7.14
Order details:
slide plate for bolting
type 70 .. 3.
Supplementary order
details:
slide plate 70 .. ..-MB
7.15
B
d
G
C
12
13
14
16
17
18
23
24
26
27
28
34
36
37
38
46
47
48
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
3.
22
37
52
82
105
135
98
138
219
280
360
228
358
465
595
498
645
825
13
22
31
49
62
80
60
84
132
168
216
138
216
276
354
300
384
492
40
70
100
160
205
265
200
280
440
560
720
460
720
920
1180
1000
1280
1640
50
50
50
50
50
50
100
100
100
100
100
150
150
150
150
200
200
200
100
150
200
300
390
490
150
200
300
390
490
200
300
390
490
300
390
490
H sliding surface
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
22
30 x 80
30 x 130
30 x 180
30 x 280
2 x 30 x 180
2 x 30 x 230
80 x 130
80 x 180
80 x 280
2 x 80 x 180
2 x 80 x 230
130 x 180
130 x 280
2 x 130 x 180
2 x 130 x 230
180 x 280
2 x 180 x 180
2 x 180 x 230
bore
holes
weight
[kg]
150
200
250
350
440
540
200
250
350
440
540
250
350
440
540
350
440
540
0
0
0
0
0
0
60
60
60
60
60
100
100
100
100
150
150
150
125
175
225
325
415
515
175
225
325
415
515
225
325
415
515
325
415
515
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
12
12
12
12
12
12
14
14
14
14
14
14
14
14
14
14
14
14
0.9
1.3
1.6
2.3
3.0
3.7
2.4
3.1
4.5
5.8
7.1
4.6
6.6
8.5
10.6
8.8
11.3
14.0
LICAD
PRODUCT
GROUP
Page
8
0
1
2
3
4
5
6
7
PRODUCT
GROUP
9
8.0
3D
planning
LICAD
Pipe
supports
Steelworks
LICAD
LICAD is a registered
trademark of LISEGA SE.
All other products, fonts
and company names are
trade names or registered
trade descriptions of the
respective companies.
8.1
From the point of view of quality this single-source function is particularly important.
Internet communication system for downloading the latest program versions and
information on projects, including drawings
and orders
Planning software
LICAD
Software with profit effect
Needed first designed last
As a rule the project planning of complex pipe
systems runs through numerous phases of optimization. The design of pipe supports inevitably
takes place at the end of the whole process and
so their deployment frequently comes far too
late. Although the supports are needed on site
beforehand for optimum installation of the pipe
systems, they lie right at the end of the planning chain - all the more important to avoid unnecessary delay. The time factor is now crucial.
Future-orientated logistics
With LICAD, great savings in time are possible
in the logistics process, from planning right
through to delivery. For example, the LICAD
data can if required be transmitted directly for
processing on the same day by e-mail as a
computerized order list. This fits in perfectly
with ever-tighter order deadlines.
The downloading and use of LICAD is free
of charge.
8.2
pipe diameter
temperature of medium
operating load
displacement
installation height
support configuration
True-to-scale drawings
8.3
Interference checks
For larger plant projects the design of the
building structure, including steelwork, main
components and connecting piping system, is
carried out via 3D CAD programs such as
8.4
8.5
8
Pipe systems in AutoPIPE
Export of 2D data
LICAD plug-ins
AutoCAD, Autodesk
AutoCAD Plant 3D, Autodesk
MicroStation, Bentley Systems
SmartPlant 3D /Smart 3D, Intergraph
PDS, Intergraph
SUPPORT MODELER, Intergraph
For the above mentioned programs the corresponding modules are to be uploaded and
installed.
For the PDMS and AVEVA software no addon is registered. A menu extension is available by which data can be conventionally
imported and exported.
8.6
Component Libraries
AutoCAD , Autodesk
AutoCAD Plant 3D, Autodesk
MicroStation , Bentley Systems
SmartPlant 3D / Smart 3D , Intergraph
PDS , Intergraph
PDMS, AVEVA
SUPPORT MODELER , Intergraph
TEKLA Structures, TEKLA
8.7
8
LICAD plug-in for TEKLA Structures
With the development of the steelwork interface LISEGA supplies a tool that can reduce the
enormous investment in time and so optimize
the quality of the planning process.
LICAD updates
The necessary license numbers are thereby forwarded automatically by e-mail to the recipient.
Further license numbers can be obtained by
telephone.
8.8
PRODUCT
GROUP
Supplementary services,
engineering, field service
Supplementary services,
engineering, field service
Supplementary services,
engineering, field service
Contents
Page
9
0
1
2
3
4
5
6
7
8
PRODUCT
GROUP
9.0
Supplementary services
Product group 9
The LISEGA product
program presented in
this catalog STANDARD
SUPPORTS incorporates
the latest technical developments with respect to
the proper support of pipe
systems in industrial
plant construction.
The relevant international
stipulations are observed
to the fullest extent.
Service areas
The LISEGA performance package includes
not only the product spectrum but a range of
services within the framework of product application. In the field of engineering they cover
the whole process chain from pipe system
design to support planning in all the current
3D design sectors. The service field comprises
the usual support when commissioning, right
through to plant analyses and walk-downs.
9.1
Spray painting
9.2
Special treatment
Besides the standard designs available from
stock, special designs providing extra corrosion protection can be agreed on. For this,
separate manufacturing may be required.
9.4 Pre-assembly
9.6 Packaging
9.3
Together with the simplified customs procedures granted by the AEO certificate for the
accelerated export of goods, the independent declaration of preferences, as well as
the package acceptance free of any control
for airfreight due to our Known Consignor
status, this contributes noticeably to the
trouble-free preferential export processing of
LISEGA products.
9
Project-related order logistics
Our notable competence in shipping processing is matched by the high standards of packTo ensure and properly execute export control, aging and marking at LISEGA, fully covering
LISEGA has set up structures that correspond, all international standardized stipulations in
the land, sea and air transport sectors. This
on the one hand, to legal requirements and,
is confirmed by the unanimously high accepton the other, to a smooth and effective work
ance shown by our customers.
flow.
By certification as Authorized Economic
Operator (AEO-F) in the year 2009 and as
Known Consignor in March 2012, LISEGA
has shown that it meets all prerequisites for
the support of a secure supply chain.
9.7 Transport
If requested, we will take charge of the logistics
processing for shipment of the components
to the construction site or any other shipping
addresses.
9.4
Engineering
support design
The proper functional integration of pipe supports
into the existing piping
and plant concept has a
decisive influence on the
long-term behavior of the
pipe systems. Support design should therefore be
given the same care and
attention as the piping
itself. In this regard, selection of the component, the
availability of the latest
design software and especially the long experience
of the planning engineers
have a decisive influence
on the quality of design.
LICAD
AutoCAD
MicroStation
PDMS
Staad.Pro (static/dynamic calculations
for secondary steelwork)
SmartPlant review
Navisworks
ROHR2
CAESAR II
LICAD
support point
function
marking number
load cases
3. Occasional loads
earthquakes
wind
pressure impact loads
4. Test loads
water pressure tests
pickling (acid clean)
On the basis of the stipulations and information, ready-to-install load chains from standard
attachments to pipe-surrounding components
are generated with the LISEGA design program
LICAD.
travel + twist
Step 1:
Step 2:
9.6
Support design in 3D
For the design of pipe supports in 3D the
customer provides a model complete with
pipe systems, steelwork, building structures
and components, as well as all the necessary
databases. In addition, any specific requirements are to be indicated for the design of
the pipe supports.
Step 3:
Step 4:
9.7
Generation of drawings
A 2D drawing is generated directly from the
PDMS model in DXF format with different
views. Parts list, site plan and all the technical
specifications are stored as data sets and can
be further edited. If required an isometric display
of the support on the drawing is possible.
Step 5:
Step 6:
9.8
Step 7:
9.9
Welding certification
In accordance with the specified codes,
individual weld seam certification for
steelwork attachments can be provided.
Field service
Plant service
A particular problem often arises in aged installations when spring and constant hangers
with springs that are not pre-relaxed (see p.
1.15 on this). In these cases an ever-increasing loss of ultimate load occurs due to growing relaxation over time. The resulting load
deviations can lead to impermissible additional stresses, especially at sensitive points
such as connections. Timely inspection in the
plant can contribute to the prompt identification and elimination of critical stresses.
9.10
9.11
9.12
LISEGA 2015
LISEGA SE - Germany
Gerhard-Liesegang-Strae 1
27404 Zeven
Postfach 1357
27393 Zeven
Tel.: +49 (0) 42 81 - 713 - 0
Fax: +49 (0) 42 81 - 713 - 214
E-Mail: info@de.lisega.com
www.lisega.de