Professional Documents
Culture Documents
E
ELECTRICAL TECHNOLOGY
UNIT-I
1.
2.
3.
4.
5.
6.
7.
UNIT-II
1. The readings of two watt meters of 3-phase power measurement are 50 W and 100 W
respectively. Calculate power factor.
2. Define synchronous impedance of an alternator.
3. Define regulation of AC Generator?
4. Give the relationship between line quantities of voltage and current for a delta connected 3phase system?
5. What do you understand by 3-phase balanced loads?
6. Define voltage regulation of an Alternator?
7. (a) Draw Star-Delta connections of a 3-phase system and derive line and phase voltage for
both star and Delta connections.
(b) Determine voltage regulation by the synchronous impedance method.
8. A balanced star connected load of (8-j4) /phase is connected to a 3-, 400V, 50Hz supply.
Find the line current, power factor and power.
9. a) Explain power measurement by two wattmeter method.
b) Explain armature reaction in alternator with neat diagrams?
10. A delta-connected balanced 3-phase load is supplied from a 3-phase, 400V supply. The line
current is 20A and the power taken by the load is 10Kw find i) Impedance in each branch
ii) line current iii) Power factor
UNIT-III
1
Name of the Faculty: P.ANIL KUMAR
UNIT-IV
1. a) Mention the application of auto-transformer.
b)Define regulation and efficiency of transformer
2. Define efficiency and regulation of transformer.
3. What are the various losses in transformer?
4. Explain the importance of OC and SC tests in transformers.
5. Define transformation ratio of transformer.
6. Draw the phasor diagram of a transformer for an Inductive load.
7. (a) Explain how the efficiency of a transformer may be estimated from the open
circuit and short circuit tests.
(b) Discuss the principle of operation and application of single phase auto
Transformer and explain its advantages and disadvantages.
8. A 10 KVA, 200/400 V, 50Hz, 1- transformer has the following test results
OC test - 200V, 1.3A, 120W on LV side.
SC test - 22V, 30A, 200W on HV side
9. a) Derive expression for condition for maximum efficiency of a transformer.
b) A single phase transformer has a core whose cross-sectional area is 150cm2 operates at a
maximum flow density of 1.1wb/m2 from a 50Hz supply. If the secondary winding has 66
turns, determine the output in KVA when connected to a load of 4 impedance. Neglect
voltage drop.
UNIT-V
1. Define the term slip in induction motor.
2
Name of the Faculty: P.ANIL KUMAR
3
Name of the Faculty: P.ANIL KUMAR