Professional Documents
Culture Documents
Missing components
Customers provide the list of tools or components which they need
the manufacturer to use in coming up with their design product. A
tool list is embedded in the Excellon drill file or it can be sent as an
independent file. Using the tool list which is provided on the
fabrication is not professionals since it eliminates automatic
verifications and may cause some errors in data entry. We highly
recommend that you provide minimum overages so as to compensate
for any assembly attrition. Failure to do this might lead to holding of
the assembly of the board.
yourself in such a situation, we will listen to you and find the best way
out.
Non-marked polarities
In PCB assembly, there are many components used like the diodes
and batteries which have polarities. These polarities ought to be
clearly marked so that our experts might distinguish between the
cathode and anode. This is because connecting the wrong polarity to
the wrong terminal leads to a short-circuit which might blow up the
whole circuit or destroy some components due to thermal discharges.
Always ensure that the polarity of each component you provide is
clearly marked. Please note that we have most of the PCB assembly
components in our stores so to avoid such dubious mistakes, please
pay us a visit
athttp://www.raypcb.com/pcb-circuit-design-electronic-pcb-layouton-line and place your quote.
- See more
at: http://www.raypcb.com/0-13mm-single-layer-flexible-printed-cir
cuit-board-manufacturer
This applies for both non-plated and plated holes. Most of the inner
clearances are 0.010-inch inner clearance
Inner Clearance = Spacing+ Annular Ring
If you provide the above specifications, please ensure that they fit
your board precisely otherwise we will have to hold the PCB assembly
process. However, we advise our customers in advance if we see some
of such errors.
Pcb Design
Circuit Design
Written by
Sally Fang