Professional Documents
Culture Documents
GPS+GSM+SMS/GPRS
User Guide
( Version V1.0)
GT06
1 / 12
Preface
This manual shows how to operate the device smoothly and correctly. Make sure to read this
manual carefully before using this product. The introduction in this book is just for your reference, if
product appearance and colors different from the real products, please follow the products.
Contents
1Accessories
2 Product Features
3. Installation Instructions
4. Usage
5. Troubleshooting
6. Warranty
.1.Accessories
1.1 Power Cord
1.2 Installation Guide
1.3 Microphone ( optional )
1.4 SOS button ( optional )
1.5 Relay ( optional )
.2 Product features
2.1 GPS and Quad Band GSM 850/900/1800/1900Mhz
2.2 Input Voltage :8-50VDC or 8-100VDC (optional );
2.3 Tracking by SMS/GPRS
2.4 Tracking on Mobile Phone
2.5 ACC ignition signal be detected , ACC ignition signal is detected , the vehicle's state be prompted ;
2.6 Built-in vibration sensor , to achieve the vehicle intelligent anti-theft ;
2.7 specific number can be set up for SOS alarm and Security alarm ;
2 / 12
3.2.4.1 the front windshield hiding place beneath the decorative plates ;
3.2.4.2 Car meter ( epidermis of non-metallic material ) surrounding the shelter ;
3 / 12
Please use the original power cord , the red line is the positive power , black for negative power , negative
4 / 12
power installation, choose a separate grounding or grounding , not connected with other common ground . If
ACC auto- theft feature is required, being sure to connect the ACC line , the device state to decide whether to
enter the ACC fortified state ; Without access ACC line, the vehicle will enter the fortified state , vibration
occurs at the maximum security state of the vehicle is running , it will trigger vibration alarm .
3.5 Proper use of the product : Installation Power Settings Registration
Installation : The installation , you should make the GPS antenna towards the sky , above themounting location
must be no electromagnetic wave absorption materialQuality ( such as metal , heat -proof membrane ) occlusion
place.
Power : the SIM card installed in the right direction , according to the terminal wiringdirection , according to the
terminal wiringswitch.Settings: must be done , or can not perform other operations , the use of owners mobile
phoneto send text messages to set a specific number to the owner of the terminal number and SIM card .
Registration : registration method based on different dealers platforms. registration method is different , please
consult your dealer.
3.6 Indicator Description
3.6.1Red LED---indicate charge sate
state
Flashing(every 2 second)
No light
means
charging was completed normal
Powerti
is low / no boot
means
Flashing(every 2 second)
GSM initializing
Constant Lighting
No light
GSM sleep
state
means
Flashing(every 2 second)
Constant Lighting
No light
GPS sleep
.4. User
Note : GPS vehicle positioning terminal communicationsset parameters via SMS , the owners phone number to
send SMS code to the GPS vehicle positioning terminal communication SIM card number, separated by a
comma symbol , the following function parameter setting instruction format Comma English input state format.
4.1 owners password setting : the owner can only bind a number ,the last number of owners is valid default
owner password is: 123456 Set the owner number instruction are : admin123456 13712345678
5 / 12
Modify the owner password command : password123456 666888 (666888 is the new password )
4.2 SOS set a specific number
Specific number is the alarm number , you can send text messages to increase the terminal commands specific
numbers to add numbers , you can add three ,
101 is the first , 102 is the second , 103 is the third , in the alarm state , the terminal will send thePositioning
information or help to a specific number ( information is based on the needs to be set ) , and the cycle call until
the dial up . Before setting specific numbers , all numbers can be set and query. After setting a specific
number ,specific number without a password can only be associated with the instruction set .
4.2.1 increase the specific number : Instruction Format: 101 # number #
Example : # 13712345678 # 101
reply message : ok
4.2.2 delete a specific number:
Instruction format:
D101 #
D102 #
D103 #
Example : D101 # indicate to delete the first number.
Reply Information : OK
4.2.3 query a specific number : Instruction Format : C10 #
Example : C10 #
Reply Information : 101 # 13712345678
102 # 13712345688
103 # 13712345698
4.3 off the main power alarm settings
4.3.1 turned on the power-off alarm message : pwrsms123456, 1 ( default ) Reply : pwr sms alarm set ok
4.3.2 shut off SMS alarm : pwrsms123456, 0 reply : pwr sms alarm set ok
4.3.3 turned on the power-off phone alarm : pwrcall123456, 1 Reply : pwr call alarm set ok
6 / 12
4.3.4 shut off phone alarm : pwrcall123456, 0 ( default ) Reply : pwr call alarm set ok
4.4 ACC alarm settings ( lines need to be properly connected to the ACC )
4.4.1 ACC ( open start switch by car keys ) in the open state , if it is the auto-arming state , ACC can open to
Anti- automatic solution . If fortification via SMS or platform , ACC does not anti- solution automatically as it
is turned on.
4.4.2 ACC in the closed ( car key switch is turned off ) state , after a set period of time , will enter into the autoarming state.
4.5 vibrating alarm settings
4.5.1 Open the vibration alarm messages : 125 # ( default )
Reply message : OK
Reply message : OK
Reply message : OK
Reply : no sossms ok
4.6.3 SOS alarm call open instruction , soscall123456 ( default )
Reply : soscall ok
4.6.4 SOS alarm call close instruction , no soscall123456
Reply : no soscall ok
4.7 Remote monitoring
SMS Format: 88
When the owners number or a specific number to send this command to the terminal SIM card , call back to
achieve the monitoring function.
Note: The implementation of this function must first set the owner number and SOS specific numbers.
4.8 Voice Intercom ( optional ) when the terminal is called the call center or caller, the terminal product can
achieve voice intercom with the called person, to provide help in the emergency , Simultaneously, care staff or
call center can also take the initiative to be custodial staff . Click the SOS button , make a call , press to hang
up . When an incoming call, there is ringing reminder , click the SOS button to answer , press again to hang up .
Note: The implementation of this function must first set up a specific number.
4.9 SMS query location
4.9.1 As the location information of the terminal equipment needs to be queried , you can write the location
query message and sent to the terminal device SIM card the terminal reply the last location information .
SMS : 123
Note: The device can only resolve the Chinese address, users in other countries can use our mobile APP
4.9.2 owners and specific card number calls back to the location information ,the bell twice to hang up
4.10 speed alarm setting
speed limit of the speed alarm message : speed123456 080 set the speed limit of 80 km / h
4.10.1 Close speeding SMS notification : speed123456 000 ( default )
Reply : speed ok
4.10.2 Open the speeding SMS notification : speed123456 080 Re : speed ok
4.11 Displacement alarm setting
8 / 12
Displacement alarm settings command : move123456 300 ( default ) Unit : meter Re : move ok
4.12 fortification disarm SMS setting
SMS fortification : SF Re : SF OK
SMS disarm : CF Re : CF OK
Reply : apnuser ok
Set APN corresponding password command format : apnpasswd123456 password
Reply : apnpasswd ok
4.19 set the server IP and port :
SMS : IP + space + IP address + space + port number
Example : IP 219.143.106.193 8500
Re : set IP OK
4.20 -platform applications ( the dealers platforms are different, consult your dealer platforms URL )
4.20.1 Real-time monitoring, network / phone search vehicles
GPS + LBS Bi-mode positioning , GPS positioning accuracy of 2 meters , when there is GPS signals
to use the GPS positioning, in a place with no GPS signal to use LBS base station location, automatic
switching bi-mode, keep your GPS vehicle positioning terminal communication online , make sure
your monitoring 365 days 24 hours and always online.
4.20.1 Mobile real-time monitoring : mobile Internet to landing the domain
For example:
4.20.2 platform for real-time monitoring : PC Internet logindomain
Example : http://www.aika110.com
4.20.2 track playback
Landing platform , click the historical track playback function
4.20.3 report statistics logistics enterprises can set being monitored cargos departure time , route point
notification , alarm lines , regional alarm , heavy collision warning , rollover warning , driving speed,
etcthrough the software , we will analyze goods Comprehensively in transit conditions, issued
statements.
Landing platform , point report statistics .
.5. Troubleshooting
5.1 terminal was unable to connect to the backend server after the initial installation , the background is
not displayed on-line , check the terminal installation:
5.1.1 whether main power wiring is correct, pay attention not to connect the interior vehiclecontrol
line.
10 / 12
5.1.2 Whether the SIM card is properly installed , please refer to the installation instructions.
5.1.3 Whether power switch is turned on, the switch in the open edge of the back cover .
5.1.4 Check the LED state , please refer to indicators .
5.1.5 check whether the GPS has located, if not to go outside to the open space for initial positioning.
5.2 terminal in the background display offline firstly observe the three indicators are normal or not , in
the absence of the conditions observation, you can check the status of the SIM card , the steps as
follow:
5.2.1 dial SIM card number of equipment , see if you can hear the sound that the phone is turned on .
5.2.2 whether the vehicle is not covered GSM network signal in the basement.
5.2.3 Observethe dropped region ,as hte dropped individually or all dropped to determine whether it is
network problems from the service provider .
5.2.4 SIM card is arrears .
5.2.5 GPRS service is canceled ( offlineat the end of the last day ) .
5.2.6 query parameters, check that GPRS transmission interval is correct.
5.3 If the terminal GPS function has been activated, but it has not located for a long time , check that
whether the terminal installation location meets the requirements,
Please refer to the installation instructions.
5.4 When GPS signal reception is being in the poor environment ( surrounded by tall buildings and
block the GPS signal ) , please drive to the wide place to locate , general TTFF takes 1-2 minutes.
5.5 Upon receipt alarm messagesof a specific phone number off to ensurethat whether it is the illegal
cutting line , otherwise check that whether the fuse in the power line is blown or not , if yes ,please
contact your dealer to changethe fuse of standard models, only afterexclude the terminal internal fault
can the power working again .
.6.Warranty
Special statement:
1. If the products have any technical changes in the future , without notice.
2.if the appearance and colors of product are different from the real products, please follow the
products.
Please do not hesitate to email us at maryqu83@gmail.com if you have any questions.
11 / 12
12 / 12