Professional Documents
Culture Documents
Warning
1. Do not give excessive tension, twist or bending to the Tube. Such forces may cause the crushing, breakage
or falling out of the Tube.
2. Protect the Tube against damage from abrasion or twining. Otherwise the Tube may break.
3. Never use tubes other than spatter tube where the tube is exposed to spatter. Spatter can cause fire.
4. For the usage of VAC Tubes, please use VAC fittings or the one in accordance with Industrial standards.
5.
When the water is used in certain condition, be careful not to let water freeze.
6. Please avoid using the tubes having cracks, surface damage, collapsed, kinked parts and so forth.
7. The tubes cannot be used for active gas such as oxygen, hydrogen, LPG and so forth.
8. There is no guarantee for the tubes treated by someone except VAC.
9. The burst pressure of tubes depend upon the temperature, so always refer to the graph showing the
relationship between temperature and maximum running pressure.
10. Never use tubes other than antistatic tube where the system must be protected from static electricity or
charging. Static electricity may cause malfunction and other troubles with the system.
Caution
VAC - Pneumatic
Polyurethane
Tubing
SPECIFICATIONS
Compatible Fluid Type
0~145PSI
0~10.2Kgf/cm2
-29.5inHg
-750mmHg(10Torr)
-15~60 oC
Tube Series
Notes
VAC - Pneumatic
Tube Series
PU
Polyurethane Tubings
VAC Polyurethane Tubing is highly resistant to abrasion, pressure and wear, offers outstanding resistance
to kinks, excellent tensile and tear propagation strength, very good cushioning capacity and temperature
flexibility. It is also highly resistant to oil, grease, oxygen and ozone. The level of deformation remains
low even with longterm stress.
Special Physical Features
Light weight
Wide temperature range
High resistance versus moisture
Saltwater insensitive
Long service time
Mechanical Features
Advantages
Applications
Compressed air, lubrication grease / oil, gasoline, vacuum, water (not drinking water).
Technical Data
Properties
Hardness
Specific Gravity
Tensile Strength
Ultimate Elongation
300% Modulus
Tear Strength
Method
ASTM
ASTM
ASTM
ASTM
ASTM
ASTM
D2240
D792
D412
D412
D412
D624
Value
98 Shore A
1.15g/cm
450kg/cm 2
500%
160kg/cm 2
90kg/cm
VACVAC
- Pneumatic
- PneumaticC-01
Tube Series
PU
Polyurethane Tubings
Model
Tube OD
(mm)
Tube ID
(mm)
W/P
(kg/cm2)
Burst Pressure
(kg/cm2)
4
6
8
10
11
12
14
16
2.5
4
6
8
8
9
10
12
10
15
20
25
35
35
50
10
10
10
10
10
10
10
10
25
25
25
25
25
25
25
25
W/P
(kg/cm2)
Burst Pressure
(kg/cm2)
17
26.5
36
30
54
62
10
10
10
10
10
10
10
10
25
25
25
25
25
25
25
25
VPU-3
VPU-4
VPU-6
VPU-8 (10)
VPU-8
VPU-9
VPU-10
VPU-13
For Push-In One Touch Fittings
Model
Tube OD
(mm)
VPUN-4 x 0.75
VPUN-6 x 1
VPUN-8 x 1.25
VPUN-8 x 1.5
VPUN-10 x 1.5
VPUN-12 x 2
VPUN-14 x 2.5
VPUN-16 x 2.5
4
6
8
8
10
12
14
16
Wall. Thick
(mm)
0.75
1
1.25
1.50
1.50
2
2.5
2.5
88
Pressure [bar]
A = PU
Temperature [C]
C-02
VAC - Pneumatic
Tube Series
PUCH
VAC Polyurehtane recoil tubing is perfectly suited for installations requiring flexibility within a reduced
space, thanks to its small coil diameters. Straightened extremities and good resistance to shocks and
abrasion enable safe and easy manipulation of pneumatic machinery.
Advantages
Extremely flexible - resists kinking
Impervious to abrasions, heat and oil
Superior elasticity and coil memory
Working length is 1.25 x tube length
Very small bending radius and tight coil diameter economizes on work and storage space
25% lighter than rubber - easy handling
Highly resistant to wear - five times the life of rubber
Low tension - easy to work which eases user fatigue
Applications
Pneumatic control and power lines, Air tools, Assembly workstations, Laboratories, Electronic assemblies,
Robotics, Machine tools, Instrumentation etc.
Tube OD(mm)
Length (m)
Tube Color
4
6
8
10
12
14
16
2
3
4
5
6
8
10
Blue (B)
Yellow (Y)
Red (R)
Green (G)
Orange (O)
Black (Bk)
Transparent (T)
VACVAC
- Pneumatic
- PneumaticC-03
Tube Series
PUC-R
Model
Technical Data
Properties
Hardness
Abrasion Resistance
Tensile Strength
Ultimate Elongation
Tear Strength
PUC-S
Method
ASTM D2240
ASTM D746
ASTM D412
ASTM D412
ASTM D412
Value
85
2 Shore A
49 Cycles
5800psi
520%
425psi
PUC-R-2
PUC-R-3
PUC-R-4
PUC-R-5
PUC-R-6
PUC-R-7
PUC-R-8
PUC-R-9
PUC-R-10
PUC-R-12
PUC-R-14
PUC-R-15
PUC-R-18
Technical Data
Hardness
Abrasion Resistance
Tensile Strength
Ultimate Elongation
Tear Strength
C-04
VAC - Pneumatic
Std. Length
(mtrs)
2
3
4
5
6
7
8
9
10
12
14
15
18
400
400
200
200
200
100
100
100
50
50
50
50
30
Model
Properties
Tube OD
(mm)
Method
ASTM D2240
ASTM D746
ASTM D412
ASTM D412
ASTM D412
Value
90
2 Shore A
39 Cycles
6400psi
500%
600psi
PUC-S-2
PUC-S-3
PUC-S-4
PUC-S-5
PUC-S-6
PUC-S-7
PUC-S-8
PUC-S-9
PUC-S-10
PUC-S-12
PUC-S-14
PUC-S-15
PUC-S-16
PUC-S-18
Tube OD
(mm)
Std. Length
(mtrs)
2
3
4
5
6
7
8
9
10
12
14
15
16
18
400
400
200
200
200
100
100
100
50
50
50
50
50
30
Nylon Tubing
SPECIFICATIONS
Compatible Fluid Type
0~2844PSI
0~200Kgf/cm2
-29.5inHg
-750mmHg(10Torr)
-40~90oC
Tube Series
Notes
VAC - Pneumatic
Tube Series
NY
Nylon Tubings
VAC Nylon Tubing is chararacterised by a combination of high strength, toughness and abrasion
resistance and is ranked as an Engineering plastic. Nylon, also known as polyamide. This is because of
its unique balance of mechanical, thermal, frictional and chemical properties. Nylon behaves in a
predictable, reproducible manner under load and in known environments. Nylon components retain
their high level of performance and engineering properties in long terms applications even at comparitively
high temperatures.
Because of its unique combination of physical & chemical properties VAC Nylon tubings have many
diversified applications, available in both Semi Flexible & Super Flexible grades & made out of respective
grades of PA-6 & PA-12.
Special Physical Features
Light weight
Low co-efficient of friction
Flexibility
Good dimensional stability
Good heat resistance
Self extingusihing
Good Chemical resistance
Non Toxic
Withstands High pressure
Advantages
Resistance to corrosion - stress - cracking - impact - rusting - internal sealing
Can be used with light weight connections
Translucent and permits visual inspection
Different colors for identification
Sound proof
Easy to transport & handle
Resistance to ageing, fatigue, abrasion, pressure, oil greases, gasoline, chemical, solvents, weather
& ozone.
Better resistance to high temperature, pressure, hammering, fatigue, impact, weather
Applications
Automotive gasoline, High pressure lubricants, Refrigeration lines, Air lines on pneumatic control
systems,Gasolines in various industries, Fuel lines for petrol engines, Beverage lines, Lines for air
compressors & Vacuum pumps, For conveying hydro carbon, vegetable oil, ester, etc, Centralised
lubrication systems, Transporting lines for ailmentary liquids such as milk and beer and biological liquids
such as blood, Serum, etc.
VACVAC
- Pneumatic
- PneumaticC-05
Tube Series
NY6
Model
NY6-3x1.5
NY6-4x2
NY6-4x2.5
NY6-4x3
NY6-4.7x2.7
NY6-5x3
NY6-5x4
NY6-6x3
NY6-6x4
NY6-6x5
NY6-6.35x4.35
NY6-8x5
NY6-8x6
NY6-9.5X7.5
NY6-9.5X6
NY6-10X8
NY6-12X10
NY6-12.5X10
NY6-15X12
NY6-16X14
Tube OD
Tube ID
Burst Pressure
(mm)
(mm)
(mm)
(kg/cm2)
3
4
4
4
4.7
5
5
6
6
6
6.35
8
8
9.5
9.5
10
12
12.5
15
16
1.5
2
2.5
3
2.7
3
4
3
4
5
4.35
5
6
7.5
6
8
10
10
12
14
20
20
20
20
25
35
40
40
40
40
40
60
50
60
70
60
80
85
100
110
600
600
360
200
440
400
150
600
300
120
275
360
200
160
350
150
120
150
90
85
Note:
The working pressure or service pressure is obtained by applying an appropriate safety factor to the value
mentioned above for bursting pressure. The safety factor depends on the use of which the tube is generally
between 3 and 5.
C-06
VAC - Pneumatic
Tube Series
NY12
Model
NY12-3x1.5
NY12-4x2
NY12-4x2.5
NY12-4x3
NY12-4.7x2.7
NY12-5x3
NY12-5x4
NY12-6x3
NY12-6x4
NY12-6x5
NY12-6.35x4.35
NY12-8x5
NY12-8x6
NY12-9.5X7.5
NY12-9.5X6
NY12-10X8
NY12-12X10
NY12-12.5X10
NY12-15X12
NY12-16X14
Tube OD
Tube ID
Burst Pressure
(mm)
(mm)
(mm)
(kg/cm2)
3
4
4
4
4.7
5
5
6
6
6
6.35
8
8
9.5
9.5
10
12
12.5
15
16
1.5
2
2.5
3
2.7
3
4
3
4
5
4.35
5
6
7.5
6
8
10
10
12
14
20
20
20
20
25
25
30
30
30
30
30
40
40
50
50
50
80
85
90
110
180
180
110
60
230
120
45
185
90
35
80
110
60
50
105
45
35
45
65
25
Note:
The working pressure or service pressure is obtained by applying an appropriate safety factor
to the value mentioned above for bursting pressure. The safety factor depends on the use of
which the tube is generally between 3 and 5.
VACVAC
- Pneumatic
- PneumaticC-07
Tube Series
NYCH6
VAC Nylon recoil tubing is perfectly suited for installations requiring flexibility within a reduced space, thanks to
its small coil diameters. Straightened extremities and good resistance to shocks and abrasion enable safe and
easy manipulation of pneumatic machinery.
Applications
Pneumatic control and power lines, Air tools, Assembly workstations, Laboratories, Electronic assemblies,
Robotics, Machine tools, Instrumentation etc.
C-08
VAC - Pneumatic
Tube OD(mm)
Length (m)
Tube Color
4
6
8
10
12
14
16
2
3
4
5
6
8
10
Blue (B)
Yellow (Y)
Red (R)
Green (G)
Orange (O)
Black (Bk)
Transparent (T)
Tube Series
A......
B......
Gas
Carbon Dioxide
Chlorine Gas
Hydrogen
Hydrogen Sulfide
Nitrogen
Oxygen
Ozone
Sulfur Dioxide
PU
Nylon
A
D
A
B
A
A
C
B
A
D
A
A
A
A
C
A
PU
Nylon
Chromic Acid
Hydrochloric Acid (10% RT)
Hydrochloric Acid (30% RT)
Hypochlorous Acid
Nitric Acid (10% RT)
Phosphoric Acid (50% RT)
Sulfuric Acid (10% RT)
Sulfuric Acid (30% RT)
D
C
D
D
D
D
C
D
D
B
D
D
C
B
B
C
Aliphatic Hydrocarbon
PU
Nylon
A
A
B
B
B
C
A
A
A
A
A
A
A
A
A
A
B
A
A
A
A
A
Inorganic Acid
Acetylene
ASTM Oil No.1
ASTM Oil No.3
ASTM Reference Fuel A
ASTM Reference Fuel C
Benzine
Butane
Gasoline
Hexane
Isooctane
Kerosene
C......
D......
Inorganic Compound
Ammonium Hydroxide
Sodium Hydroxide (10% RT)
Sodium Hydroxide (30% RT)
Sodium Hypochlorite (50% RT)
Aluminium Chloride
Aluminium Nitrate
Calcium Chloride
Calcium Hydroxide
Potassium Chloride
Potassium Hydroxide
Sulfur
Zinc Chloride
Zinc Sulfate
Organic Acid
PU
Nylon
C
B
C
D
B
B
A
D
B
C
A
A
A
A
A
B
D
B
B
A
D
A
B
A
A
A
PU
Nylon
Acetic Acid
Citric Acid
Formic Acid
Lactic Acid
Oleic Acid
Oxalic Acid
Tannic Acid
Tartaric Acid
C
C
D
C
C
C
B
B
C
B
D
B
B
B
B
B
Auromatic Hydrocarbon
PU
Nylon
C
D
D
C
C
C
B
D
D
B
B
B
Benzene
Cresol
Dichloro Benzene
Napthalene
Toluene
Xylene
VACVAC
- Pneumatic
- PneumaticC-09
Tube Series
Hydrocarbon Halide
Chloroform
Freon 12
Freon 22
Methyl Chloride
Perchloroethylene
Trichloroethylene
PU
D
A
C
D
D
D
Nylon
D
A
B
D
C
C
A......
B......
C......
D......
Nitrogenous Compound
Alcohol
Butyl Alcohol
Cyclohexanol
Ethyl Alcohol
Ethylene Glycol
Glycerin
Isopropyl Alcohol
Methyl Alcohol
Ester
Buthyl Acetate
Ethyl Acetate
Fatty Acid Ester
Stearin
C-10
VAC - Pneumatic
PU
Nylon
C
C
B
B
B
C
C
C
B
B
A
A
B
C
PU
Nylon
C
C
B
B
B
B
A
A
Aniline
Dimethyl Formamide
Nitrobenzene
Urea
Others
Water
Soap Solution
Bleach
Minecal Grease
Silicon Grease
Lacquer Thinner
Gelatine
Vinegar
Cottonseed Oil
Lard
PU
Nylon
B
C
C
D
D
B
C
C
C
C
PU
Nylon
D
D
D
A
D
D
D
A
PU
Nylon
B
B
C
A
A
C
A
B
B
B
A
A
C
A
A
C
A
B
A
A
Tube Series
Blow Gun Set consisting of PU Coil Hose & ABG-100 Plastic Gun
Standard Tube Size
Standard End Fittings
: 8mm OD X 5.5mm ID
: One End 1/2 BSP (M) with Spring
Guard
Other End 1/4 BSP(M) with Spring
Guard
Optional Accessories
: Quick Release Coupling, One Touch
Fittings, Swivel Brass Fittings
Available Working Lengths : 2Mtrs, 3Mtrs, 5Mtrs, 6Mtrs, 8Mtrs
& 10Mtrs
Standard Color of the tube : Blue / Yellow
Optional Colors available : Green, Red, Orange, Transparent,
Milky White, Metallic Silver, Black
Blow Gun Set consisting of PU Coil Hose & DA-107L Dong-A Korea Brand Aluminum Air Gun
Standard Tube Size
Standard End Fittings
: 8mm OD X 5.5mm ID
: One End 1/2 BSP (M) with Spring
Guard
Other End 1/4 BSP(M) with Spring
Guard
Optional Accessories
: Quick Release Coupling, One Touch
Fittings, Swivel Brass Fittings
Available Working Lengths : 2Mtrs, 3Mtrs, 5Mtrs, 6Mtrs, 8Mtrs
& 10Mtrs
Standard Color of the tube : Blue / Yellow
Optional Colors available : Green, Red, Orange, Transparent,
Milky White, Metallic Silver, Black
Blow Gun Set consisting of PU Coil Hose & TD-30H Joplax, Japan Brand Plastic Air Gun
with unique Flow Control Type (Output)
Standard Tube Size
Standard End Fittings
: 8mm OD X 5.5mm ID
: One End 1/2 BSP (M) with Spring
Guard
Other End 1/4 BSP(M) with Spring
Guard
Optional Accessories
: Quick Release Coupling, One Touch
Fittings, Swivel Brass Fittings
Available Working Lengths : 2Mtrs, 3Mtrs, 5Mtrs, 6Mtrs, 8Mtrs
& 10Mtrs
Standard Color of the tube : Blue / Yellow
Optional Colors available : Green, Red, Orange, Transparent,
Milky White, Metallic Silver, Black
VACVAC
- Pneumatic
- PneumaticC-11
Tube Series
Specification
Model
ABG-100
Media
Working Pressure
Air
0.1 ~ 9kg/cm2
Temperature
Connection
Material
Weight
0 ~ 600 C
G1/4
Polypropylene Resin
100g
Main Features
Compact design.
Easy to control the air flow by unique lever trigger.
Polypropylene resin is used for body material. High
Chemical resistance and durabiity.
Light weight.
Specification
Model
TD-10H
Media
Working Pressure
Temperature
Connection
Material
Weight
Main Features
Specification
C-12
VAC - Pneumatic
Model
Media
Working Pressure
Temperature
Connection
Output
Weight
Air
0.1 ~ 9kg/cm2
0 ~ 600 C
G1/4
40 ~ 290l/min(controlable) (5kg/cm2)
90g
Tube Series
Specification
Model
Media
Working Pressure
Temperature
Connection
Material
Weight
DA-107L
Air
0.1 ~ 9kg/cm2
0 ~ 600 C
G1/4
Aluminium
225g
DA-107 2L
Air
0.1 ~ 9kg/cm2
0 ~ 600 C
G1/4
Aluminium
300g
Tube Cutter
Characteristics
Safe, efficient, accurate tool for cutting tubing.
The tube cutter is capable of smoothly cutting
polyurethane & nylon tubes for piping of pneumatic
equipment.
High class cutter steel assures superior cutting
performance and endurance.
Suitable from 4mm to 16mm OD tube diameters.
Light weight, made of polyacetal material.
VACVAC
- Pneumatic
- PneumaticC-13
Tube Series
Notes
VAC - Pneumatic