Professional Documents
Culture Documents
Please Find 5.2. WIFI / WLAN connection / operating instructions to see HOW TO SET.
I: Production introduction
This WIFI video surveillance system uses wireless P2P and remote live viewing technology
for secure and reliable transmission. It supports smart phone and tablet PC(Android and IOS
systems).Real-time viewing or remote live viewing are available on your devices anytime.
Motion detection supports photo send to authorized mailbox.
II: Applications:
Applications: warehouses, shopping malls, home security, child care and the elderly
III: Features
Support IEEE802.11b/g/n Standard
Support local video 720P,you can remotely download local video to mobile phones
Support video and audio recording simultaneously on Camera and PC device, but no
sound on your phone)
Support mobile phones and tablet with android and Apple system
Support 32G SD card
HD 1.3 Mega Pixel CMOS image sensor
Support loop override function
Support WIFI point to point and remote viewing and recording
1: Switch on camera
ADC5V power Input
When DC power plugs, wifi camera is ready to work after about 20-30 seconds, then motion
detection record is ready about 3-5 seconds later.
LED light function as below:
Green indicator led light is on : camera connect to internet normally.
Green indicator led flash: camera is off network
Blue indicator led light is on: boot into standby.
Blue indicator led flash: camera is recording.
Red indicator led light is on: Charging indicator and low battery voltage.
B: Battery powered
Long press power key 3 seconds for switch on /switch off. Charging indicator is off when there
is no external power supply.
2 : When light around the camera is darker than light of night vision control ,IR led light works
automatically, camera achieve all-weather surveillance . IR-CUT does not work during the day
, the product work in the state with a color filter , images is colorful and clear. At night working
in the state of night vision can improve the pass rate of light, so that the image displayed more
clearly at night .
3. Wifi module reset switch ( inside the battery jar) : When user forgot the password ,long
press the wifi power button for 5 seconds or more under the normal working, it will
automatically restore the factory default settings, the password is blank. Disconnect the power
and restart camera again, delete the information camera saved before. Restore setting after
searching of camera again. Seeing the shown in the following operation to add the camera.
phone's file browser, click on the World-Camera. apk file to install the software, as follows:
Click the connection (WIFI-CAMERA) WIFI hot spot, after connected Worl-dcanera .can be
opened to View tool
5.3 . Adding cameras
Find installed Worldcanera shortcut icon on the desktop phone ,Click to enter , start the
software , as follows:
As follows:
click
as follows:
Click on the search or the LAN search , search IP cam video service equipment , as follows:
Select the the camera searched out, click Add this camera, as shown below:
After clicking Finish, you can see the device ID added to the list of cameras; do not need to
enter the camera name, user name, password, these are automatic, [the user's own set a
password, follow-up to enter a password before they can log in] Click Finish. Set the machine
to connect to WIFI router, it can be accessed via the wireless network.
Click WIFI Settings to enter WIFI setting interface, select "Manage wifi network" search
nearby WIFI hot spots, choose to use your own wireless router, after enter the password click
finish.
IP cam will automatically restart, when the phone's WIFI connection is disconnected, wait a
few seconds after the IP cam WIFI hot spots automatically connect to the router, and then
connect the phone WIFI router just set; into WIFI settings in just to see if the connection is
successful; displays connection instructions IP cam is connected to the router, as long as the
phone can access the place, just the device will be displayed online, you can click into the
preview.
If you are not online you can click on the red arrow place. Click Refresh online connectivity, in
addition to click editing function to delete the ID number, camera name can change, ID
numbers without modification, each camera ID number is unique.
User Settings:
Mail settings:
Mail settings as follows:
The main function is to e-mail alarm, if alarm is triggered by the camera, alarm messages will
be sent to the setting email:
Sender: Enter the sender e-mail address
Recipient: Fill in the e-mail address to receive alarm messages
SMTP server: Enter the sender's mailbox mail box websites; such as QQ-mail: smtp.qq.com
163 mailboxes for smtp.163.com
SMTP user: Enter the sender's mailbox user name (mailbox @ before the name)
SMTP Password: Enter the password for the sender's mailbox
SMTP Port: To check port number of your own mailbox, 163.QQ is 25
Also certified check, SSL select SSL
After The camera is connected to the Internet it has this feature, if the sender mail password
changed, keep the password setting with the mailbox password consistent in order to
properly use this feature
Video settings:
Click on
Voice Monitor
Capture images
Contrast Adjustment
Brightness adjustment
Mirror image
Image Flip
Click
to put icons into view playback files online play, mobile local video viewing;
remote video download View (this video is a video camera recording the premises).
Click
Click
Click
After the software is installed by default each boot automatically run. Need to turn on / off the
power to run, type msconfig in the Start menu item, and press Enter, as shown below
Click Start, the computer will pop up after the project start-up procedures will be canceled
Device Client hook before the boot program does not start automatically, check the open
automatically on startup software. After recognizing the need to restart your computer.
2: Remote Viewing
After running DeviceClient_v2.0.1.0 software, click on the device list, click the Add button,
enter the information for each device, as shown below
Device Name: Fill out the name of the mobile terminal search, DID: fill mobile client search out
DID, user name: Enter the user name mobile terminal settings, passwords handheld terminal
is set to fill in the correct password is not set then empty. Select the other figure, settings and
click OK OK back to the main screen, under the list of devices that will be using the left mouse
button and drag the display device corresponding video display box, as shown below.
If the camera is working properly online, then immediately display images, the camera did not
work or take the camera displays the camera is not online.
Other settings in the system settings menu, as shown below:
Select the Automatically start the video, then open the software automatically adds the device
to directly display options box, click and drag the mouse is not required for unattended
operation.
Voice choices are: Simplified Chinese, English, Traditional Chinese. After selecting the
appropriate voice software need to turn off the software reboot to take effect.
3: Video Playback
Click on the main screen video playback buttons under the following diagram
Select the desired playback video information of the camera at the NETCAM , local search is
a PC video, remote search is recording to TF card. Video content is shown below
Click to start video playback. After the computer installed, the file name in the installation
folder is AP Camera, The video download (remote) downloads in the file below the Downloads
folder.
VIIElectrical parameters
lens
Video
picture
memory
Operating
voltage
interface
WIFI
Night
vision
Visual angle
range
Video resolution
50-60 degree
Local video1280 x 720 pixels @30AVI format
Frame rate
Video format
AVI
Picture format
AC110-240V
Circuit interface