Professional Documents
Culture Documents
General Contractor shall visit the site, review the building shell drawings as submitted by
the Landlord or Starbucks Site Surveyor, and become thoroughly familiar with the site
conditions prior to bidding or construction.
2. General Contractor shall consult with Starbucks Construction Manager to resolve any
changes, omissions, or plan discrepancies prior to bidding or construction.
3. All work shall be performed in strict compliance with local, county, state, and federal codes
and ordinances.
Room Schedule
Name
Backbar
Cafe Seating
Retail
Unisex Restroom
Vestibule
Workroom
Grand total
Vicinity Plan
Area
361 SF
818 SF
173 SF
101 SF
31 SF
374 SF
1857 SF
R
C 2011 Starbucks Coffee Company
7. The General Contractor is responsible for obtaining permits for fire protection, plumbing,
mechanical, and electrical systems prior to installation of such systems.
8. General Contractor shall retain one set of the plans to note and document all changes
during construction. This set shall be a part of the General Contractors Store Close-out
Package as described in the Construction Management Agreement.
9. General Contractor is responsible for coordinating delivery of materials from Starbucks
contracted Third Party Logistics distribution services and Vendor Direct shipments. Refer to
Construction Management Agreement for methods and lead times.
10. Responsibility for supply and delivery of materials and equipment is identified in the
drawing schedule sheets under the column labeled "Responsibility".
11. For the purpose of the documents, to install, shall mean to provide all fasteners,
miscellaneous hardware, blocking, electrical connections, plumbing connections, and other
items required for a complete and operation installation, unless otherwise noted.
12. All item substitutions must be approved by the Starbucks Design Manager.
13. Refer to item cutsheets for additional information.
Code Information
A-2
Type of Construction:
VB, Sprinklered
1,857 s.f.
Occupancy Load:
3/4/2013 12:58:46 PM
Retail:
Seating:
Beverage/Prep:
Workroom/Storage:
173 s.f. / 30 = 6
818 s.f. / 15 = 55
361 s.f. / 200 = 2
374 s.f. / 300 = 2
total occupancy = 65
Starbucks Coffee
Company
Abbreviations
3PL
A/C
ACT
ADJ
AFF
AMP
ARCH
Air Conditioning
Acoustical Ceiling Tile
Adjustable
Above Finished Floor
Ampere
Architect
BOH
Back of House
CAB
CL
CLG
CM
CTR
CX
CXA
Cabinet
Center Line
Ceiling
Construction Manager
Center
Commissioning
Commissioning Agent
DEG
DET
DIA
DIM
DM
DN
Degree
Detail
Diameter
Dimension
Design Manager
Down
EA
EL
EQ
EXIST
EXT
Each
Elevation
Equal
Existing
Exterior
FF&E
FIO
FLR
FOH
FT
G
GC
Ground
General Contractor
HC
HDW
HM
HORIZ
HR
HT
HVAC
Hollow Core
Hardware
Hollow Metal
Horizontal
Hour
Height
"Heating, Ventilating, and Air Conditioning"
Interior Seating:
ID
Inside Diameter
Exterior Seating:
LL
Landlord
MAX
MEP
MFR
MIN
Maximum
"Mechanical, Electrical, and Plumbing"
Manufacturer
Minimum
NIC
NL
NTS
Not in Contract
Night Light
Not to Scale
OC
OD
OF/CI
OF/OI
On Center
Outside Diameter
Owner Furnished/Contractor Installed
Owner Furnished/Owner Installed
PD
PLC
PM
Production Designer
Place
Project Manager
Architect of Record
Rev
Sheet
North Arrow
PXXX-ES
Paint Tag
Exterior Elevation
XXXXX
Design ID Tag
Interior Elevation
XXXXX
Section Callout
Detail Callout
Door/Window Tag
Datum Point
XX
Revision Tag
R
Radius
RCM
Renovations Construction Manager
REF
Reference
REQ(D) Require(d)
REV
Revision
RND
Round
XX
Keynote Tag
X' XX"
SB
SC
SF
SHT
SIM
SPEC
SQ
Starbucks
Solid Core
Square Feet
Sheet
Similar
Specification
Square
TEMP
TYP
Temporary
Typical
UON
VD
VERT
VIF
Vendor Direct
Vertical
Verify in Field
Revision Cloud
Revision Schedule
By
Description
Index of Sheets
Symbol Legend
Date
Sheet Title
General
G-001
G-010
G-011
G-012
G-013
General Information
Design Specifications - Commercial Interiors
Design Specifications - Commercial Interiors
Design Specifications - Commercial Interiors
Design Specifications - Commercial Interiors
Architectural
A-101
A-102
A-103
A-201
A-202
A-600
Interiors
I-101
I-112
I-113
I-114
I-115A
I-115B
I-116
I-117
I-118
I-119
I-211
I-212
I-213
I-401
I-402
I-501
I-502
I-503
I-504
I-505
I-506
I-507
I-508
I-509
I-601
I-602
Code/Accessibility Plan
Floor Plan
Penetration Plan
FF and E Plan
Casework Plan
Upper Casework Plan
Reflected Ceiling Plan
Lighting Plan
Floor Finish Plan
Wall Finish Plan
Interior Elevations
Interior Elevations
Interior Elevations
Enlarged Restroom Plan and Elevations
Restroom Details
Casework Details
Casework Details
Casework Details
Casework Details
Casework Details
Casework Details
Design Details
Design Details
Design Details
Schedules
Schedules
Mechanical
M100
M200
Electrical
E001
E100
E110
E111
E112
E113
E200
E210
Plumbing
P100
P200
P300
P400
P500
Electrical Specifications
Electrical Site Plan
Penetration Plan
Power Plan
Signage, Lighting Plan & Schedule
Roof Power Plan
Typical Details
Panel Schedules, One-Line Diagram & Energy
Code Compliance
6. General Contractor shall patch and repair all existing walls, floors, ceilings, or other
surfaces identified to remain that may become damaged during the course of the work.
Project Name:
5. General Contractor to verify all dimensions, including clearances required by other trades,
and notify Starbucks Construction Manager of any discrepancies prior to proceeding with the
work. All dimensions are to the face of the finished surface unless noted otherwise. All
dimensions to be taken from designated datum point. Do not scale drawings.
Project Contacts
Project Address:
General Notes
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Sheet Title:
General Information
As indicated
Scale:
Sheet Number:
G-001
3/4/2013 12:58:50 PM
Site Construction
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
These Drawings and Specifications are confidential
and shall remain the sole property of Starbucks
Corporation, which is the owner of the copyright in
this work. They shall not be reproduced (in whole
or in part), shared with third parties or used in any
manner on other projects or extensions to this
project without the prior written consent of
Starbucks Corporation. These drawings and
specifications are intended to express Design Intent
for a prototypical Starbucks store (which is subject
to change at anytime) and do not reflect actual site
conditions. Neither party shall have any obligation
nor liability to the other (except as stated above)
until a written agreement is fully executed by both
parties.
Architect of Record
Rev
Date
Revision Schedule
By
Description
Concrete
Project Address:
Project Name:
General Conditions
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
LEED
AP:
Production Designer:
Checked by:
Sheet Title:
Scale:
Sheet Number:
G-010
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
These Drawings and Specifications are confidential
and shall remain the sole property of Starbucks
Corporation, which is the owner of the copyright in
this work. They shall not be reproduced (in whole
or in part), shared with third parties or used in any
manner on other projects or extensions to this
project without the prior written consent of
Starbucks Corporation. These drawings and
specifications are intended to express Design Intent
for a prototypical Starbucks store (which is subject
to change at anytime) and do not reflect actual site
conditions. Neither party shall have any obligation
nor liability to the other (except as stated above)
until a written agreement is fully executed by both
parties.
Architect of Record
Rev
Date
Revision Schedule
By
Description
Metals
Project Address:
Project Name:
Concrete (Continued)
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 12:58:51 PM
Sheet Title:
Scale:
Sheet Number:
G-011
3/4/2013 12:58:52 PM
Finishes (Continued)
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
These Drawings and Specifications are confidential
and shall remain the sole property of Starbucks
Corporation, which is the owner of the copyright in
this work. They shall not be reproduced (in whole
or in part), shared with third parties or used in any
manner on other projects or extensions to this
project without the prior written consent of
Starbucks Corporation. These drawings and
specifications are intended to express Design Intent
for a prototypical Starbucks store (which is subject
to change at anytime) and do not reflect actual site
conditions. Neither party shall have any obligation
nor liability to the other (except as stated above)
until a written agreement is fully executed by both
parties.
Architect of Record
Rev
Finishes
Date
Revision Schedule
By
Description
Project Address:
Project Name:
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Sheet Title:
Scale:
Sheet Number:
G-012
3/4/2013 12:58:53 PM
indicated.
1.3
QUALITY ASSURANCE
SECTION 09910 - INTERIOR PAINTING
A.
Quality Standards: "MPI Approved Products List" and "MPI Architectural Painting Specification
1.1
SUMMARY
Manual."
A.
Surface preparation and the application of paint systems on interior substrates.
1.4
GENERAL
1.2
SUBMITTALS
A.
Chemical Components of Field-Applied Interior Paints and Coatings:
A.
Samples for Verification:
1.
VOC Limits:
1.
For each non-standard latex topcoat color and gloss indicated.
a.
Clear Wood Finishes, Varnishes: VOC not more than 350 g/L.
2.
For each type of non-standard paint system and in each color and gloss of topcoat
b.
Shellacs, Clear: VOC not more than 730 g/L.
indicated.
c.
Stains: VOC not more than 250 g/L.
1.3
QUALITY ASSURANCE
d.
Primers, Sealers, and Undercoaters: 200 g/L.
A.
Quality Standards: "MPI Approved Products List" and "MPI Architectural Painting
1.5
PRIMERS AND SEALERS
Specification Manual."
A.
Exterior Oil Wood Primer: MPI #7.
B.
Mockups for each color and finish.
1.6
STAINS
1.4
MANUFACTURERS
A.
Exterior Semitransparent Latex Stain: MPI #13.
A.
Manufacturers: Subject to compliance with requirements, provide products by one of the
B.
Exterior, Solid-Color Latex Stain: MPI #16.
following:
C.
Stain, Semi-Transparent, for Interior Wood: MPI #90.
Product one for RNA only.
1.7
VARNISHES
1.
Sherwin-Williams Company (The).
A.
Interior Varnish (Semigloss): MPI #74,
2.
or approved equal.
B.
Interior Varnish (Gloss): MPI #75, Gloss Level 6, alkyd type.
1.5
GENERAL
1.8
EXTERIOR WOOD-FINISH-SYSTEM SCHEDULE
A.
Chemical Components of Field-Applied Interior Paints and Coatings:
A.
Solid-Color Latex Stain System: MPI EXT 6.3K.
1.
VOC Limits:
1.
Prime Coat If Tannin Bleeding occurs: Exterior oil wood primer.
a.
Flat Paints and Coatings: VOC content of not more than 50 g/L.
2.
Two Stain Coats: Exterior, solid-color latex stain.
b.
Nonflat Paints and Coatings: VOC content of not more than 150 g/L.
B.
Semitransparent Stain System: MPI EXT 6.3D.
c.
Primers, Sealers, and Undercoaters: 200 g/L.
1.
Two Stain Coats: Exterior semitransparent latex stain.
d.
Anticorrosive Coatings: VOC content of not more than 250 g/L.
1.9
INTERIOR WOOD-FINISH-SYSTEM SCHEDULE
1.6
PRIMERS/SEALERS
A.
Semitransparent Stain System: MPI INT 6.3C
A.
Primer Sealer, Interior, Institutional Low Odor/VOC: MPI #149.
1.
Prime Coat: Stain, semi-transparent, matching topcoat.
Product one for RNA only.
2.
Topcoat: Stain, semi-transparent, for interior wood.
1.
Sherwin-Williams Company; Harmony Interior Latex Primer
B.
Polyurethane Varnish System: MPI INT 6.3K.
2.
or approved equal
a.
Two Field-Applied Finish Coats: Interior Varnish [(satin)] [(gloss)].
B.
Wood-Knot Sealer: Sealer recommended in writing by topcoat manufacturer for use in paint
END OF SECTION 09931
systems indicated.
1.7
METAL PRIMERS
A.
Rust-Inhibitive Primer (Water Based): MPI #107.
1.8
LATEX PAINTS
A.
Latex, Interior, Institutional Low Odor/VOC, (Gloss Level 2): MPI #144.
Product one for RNA only.
1.
Sherwin-Williams Company; Harmony Interior Latex
2.
or approved equal
SECTION 10522 - FIRE EXTINGUISHER CABINETS
B.
Latex, Interior, (Gloss Level 2): MPI #44.
1.1
SUBMITTALS
Product one for RNA only.
A.
Product Data: For each type of product indicated. Include construction details, material
1.
Sherwin-Williams Company; Color Accents Interior Latex
descriptions, dimensions of individual components and profiles, and finishes for fire protection
2.
or approved equal
cabinets.
C.
Latex, Interior, High Performance Architectural, Semi-Gloss (Gloss Level 5): MPI #141.
1.
Fire Protection Cabinets: Include roughing-in dimensions, details showing mounting
1.9
INTERIOR PAINTING SCHEDULE
methods, relationships of box and trim to surrounding construction, door hardware,
A.
Steel Substrates:
cabinet type, trim style, and panel style.
1.
Institutional Low-Odor/VOC Latex System: MPI INT 5.1S.
1.2
PRODUCTS
a.
Prime Coat: Rust-inhibitive primer (water based).
A.
Security Fire Protection Cabinet:
b.
Intermediate Coat: Institutional low-odor/VOC interior latex matching topcoat.
1.
Type: For fire extinguisher.
c.
Topcoat: Institutional low-odor/VOC interior latex (Gloss Level as indicated in
a.
Basis of Design: The design is based on Larsen's Manufacturing Company;
paint schedule).
Model #SS2409-R1.
B.
Glue-Laminated Beam and Column Substrates:
2.
Construction: [Nonrated] [1-hour fire rated] [2-hour fire rated].
1.
Institutional Low-Odor/VOC Latex System: MPI INT 6.1Q.
3.
Mounting: Recessed.
a.
Prime Coat: Interior latex primer/sealer.
4.
Door Style: Emergency cylinder lock, continuous hinge; and clear vision panel.
b.
Intermediate Coat: Institutional low-odor/VOC interior latex matching topcoat.
5.
Finish: Steel, baked enamel or powder coated.
c.
Topcoat: Institutional low-odor/VOC interior latex (Gloss Level as indicated in
END OF SECTION 10522
paint schedule).
C.
Wood Substrates:
SECTION 10523 - FIRE EXTINGUISHERS
1.
Institutional Low-Odor/VOC Latex System: MPI INT 6.3V.
1.1
SUMMARY
a.
Prime Coat: Interior latex primer/sealer.
A.
Owner-Furnished Material: Hand-carried fire extinguishers.
b.
Intermediate Coat: Institutional low-odor/VOC interior latex matching topcoat.
1.2
QUALITY ASSURANCE
c.
Topcoat: Institutional low-odor/VOC interior latex (Gloss Level as indicated in
A.
Fire Extinguishers: NFPA 10 [and FMG listed].
paint schedule).
1.3
PRODUCTS
D.
Gypsum Board Substrates:
A.
Portable, Hand-Carried Fire Extinguishers:
1.
Institutional Low-Odor/VOC Latex System: MPI INT 9.2M.
1.
Multipurpose dry-chemical type, manufacturer's standard container.
a.
Prime Coat: Interior latex primer/sealer.
B.
Mounting Brackets: Steel with identification lettering.
b.
Intermediate Coat: Institutional low-odor/VOC interior latex matching topcoat.
END OF SECTION 10523
c.
Topcoat: Institutional low-odor/VOC interior latex (Gloss Level as indicated in
paint schedule).
E.
High-Impact Gypsum Board Substrates:
1.
High-Performance Architectural Latex System: MPI INT 9.2B.
a.
Prime Coat: Interior latex primer/sealer.
b.
Intermediate Coat: Institutional low-odor/VOC interior latex matching topcoat.
c.
Topcoat: Institutional low-odor/VOC interior latex (Gloss Level as indicated in
paint schedule).
F.
Plaster Substrates:
1.
Institutional Low-Odor/VOC Latex System: MPI INT 9.2M.
a.
Prime Coat: Interior latex primer/sealer.
b.
Intermediate Coat: Institutional low-odor/VOC interior latex matching topcoat.
c.
Topcoat: Institutional low-odor/VOC interior latex (Gloss Level as indicated in paint
schedule).
G.
Acoustical Ceiling Tile:
1.
Institutional Low-Odor/VOC Latex System: MPI INT 9.2M.
a.
Prime Coat: Interior latex primer/sealer.
b.
Topcoat: Institutional low-odor/VOC interior latex (Gloss Level as indicated in paint
schedule).
END OF SECTION 09910
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
These Drawings and Specifications are confidential
and shall remain the sole property of Starbucks
Corporation, which is the owner of the copyright in
this work. They shall not be reproduced (in whole
or in part), shared with third parties or used in any
manner on other projects or extensions to this
project without the prior written consent of
Starbucks Corporation. These drawings and
specifications are intended to express Design Intent
for a prototypical Starbucks store (which is subject
to change at anytime) and do not reflect actual site
conditions. Neither party shall have any obligation
nor liability to the other (except as stated above)
until a written agreement is fully executed by both
parties.
Architect of Record
Rev
Specialties
Date
Revision Schedule
By
Description
Project Address:
Finishes (Continued)
Finishes (Continued)
Project Name:
Finishes (Continued)
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Sheet Title:
Scale:
Sheet Number:
G-013
Starbucks Coffee
Company
8
A-202
1
10
0"
.
typ
Sheet Notes
1. 5-Panel Menu board and speaker located at car 5. See
details 3, 6, 8, 9 & 10/A-102.
A-201
5
A-103
Architect of Record
4. Not used.
2
2
A-201
3' - 0"
11305
5. Not used.
1
6. Thank You / Do Not Enter directional sign. See details
2 & 4/A-103.
Rev Date
2
2/22/12
Revision Schedule
By
Description
HVAC/Sign Revisions
10052
10046
3
A-102
10050
Project Name:
1
A-102
Project Address:
x0018
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
3' - 0"
8' - 0"
EQ. EQ.
10' - 0"
max.
12732 3
5
A-102
Checked by:
11305
3/4/2013 12:57:51 PM
Sheet Title:
Site Plan
Scale:
1" = 10'-0"
5'
10'
20'
As indicated
Scale:
Sheet Number:
A-101
CLEARANCE BAR
4"
5' - 6"
2' - 3"
3' - 0"
1 1/4"
2"
1' - 0"
9'-6" CLEARANCE
TOP VIEW
1' - 7"
FINISHED GRADE
5"
R
C 2011 Starbucks Coffee Company
3' - 6"
2' - 5 1/4"
9"
FINISHED GRADE
1/2" = 1'-0"
1/2" = 1'-0"
1' - 1"
#3 TIES, TYP.
@ 12" O.C.
Conduit
Detector loop centered on
speaker post 2" (50mm) below
final grade
Concrete footing
Scale:
1/4" = 1'-0"
3/4" CONDUIT
FOR POWER
POST BOTTOM
PLATE OUTLINE
8 1/2"
FINISHED
GRADE
Edge of curb
ELEVATION
8' - 1 1/4"
1/2" = 1'-0"
PLAN
1/2" = 1'-0"
4' - 1"
10"
10"
Camera
Microphone
4' - 1"
Engraved
sign
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Speaker
2' - 0 1/4"
Scale:
4 3/4"
1' - 10"
Outline of
speaker/camera post
x0018
Bollard, see
detail 9/A-103
6' - 1 1/4"
Edge of
concrete curb
1' - 0"
CONDUIT BUNDLE
2' - 6"
Concrete footing
1/2" = 1'-0"
2' - 0"
4' - 0"
5' - 4"
Outline of menu
board above
Scale:
4' - 0"
Clearance bar,
see detail 4/A-102
12732
Minimum Clearance
30
1' - 0"
5' - 1"
#5 VERTICALS
(6 EACH)
DIAMETER
4' - 6"
Revision Schedule
By
Description
PLAN
2' - 0"
Date
1/2" = 1'-0"
SIDE ELEVATION
Rev
Project Address:
FRONT ELEVATION
#3 TIES (3 EACH)
PLATE DETAIL
Project Name:
MENU BOTTOM
PLATE OUTLINE
4"
2' - 2"
FINISHED GRADE
2' - 0"
MOUNTING PLATE
Pre-Menu 30 Deg
Scale:
1/2" = 1'-0"
Architect of Record
Scale:
FREE-STANDING MENU
(DESIGN VARIES)
2' - 1 3/4"
Edge of
concrete curb
DECOR PANEL
8 3/4"
3' - 0"
4' - 6"
Concrete footing
see additional
details for
construction
Minimum Clearance
Outline of menu
board above
1 1/2"
30
2"
4' - 1"
Starbucks Coffee
Company
PLAN
NOTES:
1. FOOTING DEPTH MAY VARY AS PER SITE AND SOIL
CONDITIONS.
SPLIT FRAME
5"
Sheet Title:
Site Details
2' - 2"
Front elevation
Finished grade
Side elevation
As indicated
Scale:
1/2" = 1'-0"
10
1/2" = 1'-0"
Sheet Number:
A-102
2
2
THANK
YOU
DO NOT
ENTER
SIDE A
SIDE B
2' - 1"
6"
#3 TIES, TYP.
#4 VERTICALS (4 EA.)
1' - 6" DIA.
FRONT ELEVATION
FINISHED GRADE
FINISHED
GRADE
Starbucks Coffee
Company
#3 TIES (3 EA.)
SIDE ELEVATION
DIRECTIONAL
PLATE OUTLINE
1"
SIGN
GRAPHIC
DIRECTIONAL SIGN
3' - 7"
3' - 10"
1' - 0"
10"
6"
1/2" = 1'-0"
PLAN
Scale:
1/2" = 1'-0"
Architect of Record
Concrete infill
full length
of drive thru lane
Rev Date
2
2/22/12
4' - 11 1/2"
Window
per plan
3' - 11 1/2"
EQ
EQ
2"
1 3/4"
Bollard
3' - 0"
1/2" = 1'-0"
1 1/2" = 1'-0"
6"
SMOOTH CURVED SURFACE
Hoop rack
Existing concrete
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Sheet Title:
3"
3/4/2013 12:57:55 PM
3/4" = 1'-0"
Project Address:
Scale:
Project Name:
1/4" = 1'-0"
MIN.
Scale:
33" - 36"
6"
4' - 0"
Stainless steel
angle to cap interior
wall. Hem bottom edge
Hold
Existing or new
exterior wall
system
Revision Schedule
By
Description
HVAC/Sign Revisions
Align
Centerline
bump-out
Plan
Concrete
curb
6"
Site Details
Core holes no less than 3"
diameter (4" recommended)
As indicated
Scale:
Bollard Detail
Scale:
1/2" = 1'-0"
10
Bike Rack
Scale:
1 1/2" = 1'-0"
Sheet Number:
A-103
x0002 typ.
R
C 2011 Starbucks Coffee Company
2' - 7"
Starbucks Coffee
Company
2' - 4"
13163
4
EQ. EQ.
Sheet Notes
11392
Architect of Record
Rev
Revision Schedule
By
Description
Date
13157
West Elevation
Scale:
1/4" = 1'-0"
10020 3
Project Name:
Project Address:
13163
2' - 4"
2' - 7"
x0002 typ.
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 12:57:59 PM
Sheet Title:
Exterior Elevations
2
East Elevation
Scale:
1/4" = 1'-0"
Scale:
1/4" = 1'-0"
Sheet Number:
A-201
V.I.F.
11392
1' - 11 1/4"
V.I.F.
13163
Starbucks Coffee
Company
13163
x0002 typ.
x0002
typ.
Sheet Notes
x0003
Architect of Record
Rev
Revision Schedule
By
Description
Date
10020 2
4
North Elevation
Project Address:
1/4" = 1'-0"
Scale:
Project Name:
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 12:58:02 PM
Sheet Title:
Exterior Elevations
1/4" = 1'-0"
Scale:
Sheet Number:
A-202
CUT PENETRATION
FLASHING AND FOLD
THROUGH ROUGH
OPENING, MINIMUM 2"
9"
2"
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
18
"
AT SILL, INSTALL
SEALANT JOINT BETWEEN
BACKDAM OF SILL PAN
AND WINDOW
1" = 1'-0"
3/8" = 1'-0"
3/8" = 1'-0"
3/8" = 1'-0"
COORDINATE HEIGHT OF
BACK DAM WITH THRESHOLD
AND JAMB AT DOORS, NO
ATTACHMENTS THROUGH
HORIZONTAL SILL PAN
6"
6"
ATTACH PENETRATION
FLASHING TO ROUGH
OPENING AT INTERIOR
FACE OF FRAMING
CUT PENETRATION
FLASHING AND
FOLD THROUGH
ROUGH OPENING,
MINIMUM 2"
INSTALL 24 GA HEAD
FLASHING, SEE
DETAILS FOR TYPICAL
FLASHING DETAILS
FACTORY FORMED
CORNER BOOTS
9"
9"
9"
2"
Rev
9"
9"
10
1" = 1'-0"
3/8" = 1'-0"
3/8" = 1'-0"
2"
3/8" = 1'-0"
FLASHING
1 1/2" = 1'-0"
9"
MI
N
9"
18"
15
9"
9"
9"
2"
11
3/8" = 1'-0"
3/8" = 1'-0"
MI
N
3/8" = 1'-0"
AD H
HE EPT
D /8"
+1
1"
UNBROKEN FOLDED END DAM
24 GAUGE SHEET METAL
HEAD FLASHING WITH 7
DEGREE SLOPE
6"
HEMMED DRIP
EDGE, TYPICAL
1/4"
12
3/4" = 1'-0"
AD H
HE EPT
D /8"
+1
1"
LINTEL
9"
Project Address:
SILL
SHEET ALUM.
END DAM
9"
18"
SEALANT
Project Name:
Scale:
Revision Schedule
By
Description
12
"
Date
12"
9"
SECURE TO SUBSTRATE, COORDINATE
ATTACHMENTS WITH WATERPROOFING
MEMBRANE MANUFACTURER, SEE DETAILS
FOR LEG CONFIGURATION
Architect of Record
EXTEND
PENETRATION
FLASHING 12"
BEYOND ROUGH
OPENING AT EACH
END OF SILL
BUTTERFLY BOTTOM
CORNERS WITH
SELF-ADHESIVE
FLEXIBLE FLASHING.
3"
14
6"
13
9"
2"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
LEED
AP:
Production Designer:
Checked by:
Sheet Title:
1/2"
Flashing Details
As indicated
Scale:
Step G: Storefront
Scale:
3/8" = 1'-0"
3/8" = 1'-0"
Sheet Number:
A-600
A-2
Total occupants:
65
Exits:
required
provided
Maximum overall diagonal:
2
3
Exit separation:
allowed
provided
>25'
26'
<75'
41' - 6"
<250'
85' - 7"
ADA Key
1. All thresholds to be ADA compliant per all applicable codes.
2. Barrier-free path of travel.
3. 30" x 48" clear for wheelchair access.
4. 32" minimum clear at restroom door.
5. 60" diameter clear for wheelchair access. See sheet I-402 for
restroom clearances.
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
These Drawings and Specifications are confidential
and shall remain the sole property of Starbucks
Corporation, which is the owner of the copyright in
this work. They shall not be reproduced (in whole
or in part), shared with third parties or used in any
manner on other projects or extensions to this
project without the prior written consent of
Starbucks Corporation. These drawings and
specifications are intended to express Design Intent
for a prototypical Starbucks store (which is subject
to change at anytime) and do not reflect actual site
conditions. Neither party shall have any obligation
nor liability to the other (except as stated above)
until a written agreement is fully executed by both
parties.
Architect of Record
6. POS, condiment cart, and hand-off plane are 2'-10" AFF for
wheelchair accessibility.
Rev
Date
Revision Schedule
By
Description
in.
M
"
36
Ma
xim
um
ove
rall
dia
gon
75'
al
in.
M
"
36
4
5
Code/Accessibility Plan
Scale:
1/4" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
2'
Scale: 1/4" = 1'-0"
3/4/2013 12:59:07 PM
RESTROOM
Project Address:
8
RESTROOM
5
4
Project Name:
4'
8'
Sheet Title:
Code/Accessibility Plan
1/4" = 1'-0"
Scale:
Sheet Number:
I-101
Existing Wall
5"
Existing Wall
4 1/4"
7 1/4"
ITEM
WEIGHT
HEIGHT AFF
APPROX. WIDTH
125 LBS
3'-0" TO 3'-4"
200 LBS
5'-8" TO 6'-0"
7 1/4"
Verify existing GWB in areas near moisture is a moisture resistant gypsum wallboard.
Replace as necessary. Secure moisture resistant GWB to studs with drywall screws at 10"
O.C. at panel edges and 12" O.C. at intermediate supports.
300 LBS
200 LBS
2'-6" TO 3'-0"
5'-0" AROUND WC
200 LBS
3'-0" TO 3'-4"
250 LBS
Sheet Notes
1
"
-2
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
These Drawings and Specifications are confidential
and shall remain the sole property of Starbucks
Corporation, which is the owner of the copyright in
this work. They shall not be reproduced (in whole
or in part), shared with third parties or used in any
manner on other projects or extensions to this
project without the prior written consent of
Starbucks Corporation. These drawings and
specifications are intended to express Design Intent
for a prototypical Starbucks store (which is subject
to change at anytime) and do not reflect actual site
conditions. Neither party shall have any obligation
nor liability to the other (except as stated above)
until a written agreement is fully executed by both
parties.
5
6
Architect of Record
1
x0035
'10
typ.
4"
1/
Rev
Date
Revision Schedule
By
Description
4
typ.
CAFE
SEATING
1
3
1
BACKBAR
I-507
'22
7
2"
1/
F
6'
"
-6
RETAIL
C
7' - 7 1/4"
Min.
4"
6'
-6
2"
1/
4"
3
6'
1' - 1"
1
-1
2"
1/
2'
"
-0
WORKROOM
5' - 11 1/2"
5"
Project Name:
7' - 7 1/2"
3
2'
2"
1/
4"
1/
10190
'13
3'
RESTROOM
4"
1/
RESTROOM
6
VESTIBULE
10190
D
2
1
B
4' - 5"
Project Address:
7' - 5"
11' - 5 1/4"
4'
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Floor Plan
Scale:
Existing Wall
1/4" = 1'-0"
3/4/2013 12:59:12 PM
Sheet Title:
Existing Column
0
2'
Scale: 1/4" = 1'-0"
4'
Floor Plan
8'
As indicated
Scale:
Sheet Number:
I-112
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
Sheet Notes
1. Floor sink. See cutsheets for component specifications and
cutout requirements. Ensure sink is easily accessible for
servicing.
8"
10
10
4"
1/
4"
1/
3. Toilet Floor Penetrations. Refer to product cutsheet for stubup location relative to finished wall.
9"
5'
1
-1
4"
1/
1'
-5
Architect of Record
8'
2"
1/
-6
2"
1/
7. Existing column.
Rev
Date
Revision Schedule
By
Description
1'
7"
4"
1/
4'
1
5'
CAFE
SEATING
-4
2"
1/
"
11
10
2"
1/
4"
1/
1'
1
8'
2'
7
2"
1/
-0
-6
2"
1/
2"
1/
3'
2'
6"
1'
2
-5
4"
1/
4
1
5
7
1' - 4 3/4"
WORKROOM
4'
Project Name:
2"
5' - 2 1/2"
8' - 9 1/2"
1' - 0"
Penetration Plan
Scale:
Floor Sink
1/4" = 1'-0"
2'
3/4/2013 12:59:15 PM
4'
3'
4"
3/
RESTROOM
Project Address:
1' - 10 1/2"
2' - 1 1/2"
4'
RESTROOM
7"
VESTIBULE
2"
1/
'14
6'
-2
2"
-1
9'
1' - 4 3/4"
7'
4"
1/
RETAIL
4"
1/
3'
BACKBAR
4"
3/
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Floor Penetration
8'
Sheet Title:
Penetration Plan
1/4" = 1'-0"
Scale:
Sheet Number:
I-113
x0006 25
2
I-501
R
C 2011 Starbucks Coffee Company
10042 (2)
12161
12482
Sheet Notes
0"
12187 (7)
12722 (7)
OUTDOOR
SEATING
(3) 12321
11823
11851
12631
13
CAFE
SEATING
10267
1
(2) 10075
10153 10527
10215 10874
10267 11003 12808
12694
x0004
12379 (4)
17
RETAIL
BACKBAR
6
10293 2
18
(2) 10014
10024
10028
10029 (4)
10091
10152 10305
10312 (2)
10314 10549
10396 10724
10746
10855 (2)
10856 (4)
15. Custom community table at 36" AFF with custom base. See
detail 1/I-501.
10597
11115
12376 (3)
12407
10501
VESTIBULE
RESTROOM
13
10075
24
12618
23
10581
10947
10977
23
22 10102
10971
12
10176
20
27
WORKROOM
12383
22. Ice Machine. See details 5/I-503 & 4/I-505 and Electrical
and Plumbing sheets for more information.
5
I-401
25. Custom Bench. See detail 2/I-501 and finish schedule for
more information.
10995
10922
10698
26
18
11083 (2)
11070
11
21
28. New bike racks. GC & CM to locate ideal location for bike
racks. Minimum clearance between bike racks as indicated.
See cutsheet on AEC website for clarification on other
clearances needed. See detail 10/A-103.
10967
1/4" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
2'
Scale: 1/4" = 1'-0"
3/4/2013 12:59:29 PM
19
10797
RESTROOM
Revision Schedule
By
Description
10
10000
10008 (2)
12640
Date
10820
26
Rev
10305
x0033
15
12330 (4)
10462 (9)
10416 (9)
10215
10943
10505
12508 (2)
10344
12490 (13)
12282 (16)
12145 (2)
12241 (2)
Architect of Record
6
I-504
14
12335 (2)
7
I-504
(26) 12149
13298
10020
(10) 10513
Project Address:
12160 (2)
13
13
Project Name:
2'
F. Each hand washing sink will have a single service towel and
soap dispenser, and all hand sinks to have a combination faucet
or premixing faucet.
x0005 16
10065 (3)
12139 (3)
28
Starbucks Coffee
Company
4'
8'
Sheet Title:
FF and E Plan
1/4" = 1'-0"
Scale:
Sheet Number:
I-114
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
E. All casework base units shall be set on 1/4" (6mm) nonabsorbent plastic shims provided by casework vendor.
F. See Wall Finish Plan for location, tagging, and finish schedules
of applied wall treatments.
G. Install oven stainless steel countertop and base cabinet with
1/2" (10mm) gap between adjacent countertops.
H. See Reflected Ceiling Plan for casework soffit locations.
7
I-502
Sheet Notes
1. Do not caulk trash rings to countertops.
2. All new casework, cubbies, countertops and tabletops
throughout. Finish per schedule sheet I-602.
12516
x0008
12100
x0012
11957
13646
x0014
11155
12057
x0015
EQ.
x0016
x0017
1
I-501
5
I-501
Workstation Designations
ADD 01-01
ADD 10-01: Removed backsplash.
6
I-502
RETAIL
(2) 12363
13191
(2) 13331
1
I-503
11945
12080
8
x0004
x0001
BACKBAR
(3) 12100
BRW 09-02
12011
(2) 12028
(2) 12043
12050
12473
12367
12854
11915
12080
CON 03-01
11937 12472
12032 11142 (2)
(2)
VESTIBULE
RESTROOM
POS 13-01
RESTROOM
Project Name:
WORKROOM
Casework Plan
Scale:
1/4" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
2'
Scale: 1/4" = 1'-0"
3/4/2013 12:59:30 PM
Revision Schedule
By
Description
EQ.
Date
x0020
12007 (2)
x0021
12034
EQ.
x0009
EQ.
Rev
Project Address:
CAFE
SEATING
2
x0013
13355
12100
5. Existing column.
11962
12008
12019
12023
12033
12043 12078
12087
11155
11957
5
I-502
Architect of Record
x0010
x0011
4'
8'
Sheet Title:
Casework Plan
1/4" = 1'-0"
Scale:
Sheet Number:
I-115A
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
E. All casework base units shall be set on 1/4" (6mm) nonabsorbent plastic shims provided by casework vendor.
F. See Wall Finish Plan for location, tagging, and finish schedules
of applied wall treatments.
G. Install oven stainless steel countertop and base cabinet with
1/2" (10mm) gap between adjacent countertops.
H. See Reflected Ceiling Plan for casework soffit locations.
Sheet Notes
1. All new casework and cubbies throughout. Finish per
schedule sheet I-602.
2. Mount upper cabinets per details 1 & 2/I-502.
Architect of Record
3. For wall mounted items, see Wall Finish Plan and Interior
Elevations.
4. Existing column.
13391
3'
0"
11902
Rev
x0007
Date
Revision Schedule
By
Description
11902
4
2
I-502
5
(9) 11977
(14) 12845
below
11902
below
(15) 12816
1/4" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
2'
Scale: 1/4" = 1'-0"
3/4/2013 12:59:32 PM
Project Address:
(2) 11956
Project Name:
BACKBAR
4'
8'
Sheet Title:
Scale:
Sheet Number:
I-115B
Starbucks Coffee
Company
8
(9) x0002
10
J. Paint substitutions are not allowed. Use Starbucks'
national account "color code" when ordering paints. See
Schedule sheets for schedules
11392
x0022
4'
2'
-1
-8
Architect of Record
"
/4
Sheet Notes
2"
1/
2'
2"
1/
x0023
CAFE
SEATING
x0022
12946 (5)
15' - 11 1/2"
13
12
typ.
6
EQ.
x0022
12859
9. ACT ceiling, see details 6, 7 & 8/I-507.
12
9'
RETAIL
"
-4
12860
12. Paint soffit elevation same as underside, Bleeker Beige, typ.
1
I-507
Align
I-507
I-507
14
11265 (14)
13245 (14)
typ.
(17) 11533
(17) 13244
11550 (2)
12976
12332
x0024
x0024
12947 (5)
12958 (32)
(11) 12552
VESTIBULE
8' - 0" AFF
RESTROOM
8' - 0" AFF
RESTROOM
WORKROOM
Project Name:
11404 (6)
11154
1/4" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
2'
Scale: 1/4" = 1'-0"
3/4/2013 12:59:36 PM
4
x0023
11392
3
13157
BACKBAR
EQ.
6' - 2"
(2) 12976
13312
13214
EQ.
EQ.
Project Address:
Revision Schedule
By
Description
Review Revision
Rev Date
1
12/4/12
5
typ.
4'
8'
Sheet Title:
Scale:
Sheet Number:
I-116
"
-6
x0002 (2)
Sheet Notes
12946
12958
9
4
12946
12946
0"
4' -
-1
"
11
11533 (13)
13244 (13)
5. Exit sign.
5209 Lake Washington Blvd NE, Suite 200
Kirkland, WA 98033
t: 425 827 2100 | f: 425 828 6899 | www.fhoarch.com
4'
"
-0
5'
11265 (14)
13245 (14)
Rev
4'
2"
1/
-0
EQ.
6' - 2"
EQ.
"
9'
12332 (3)
11419
-0
0"
"
-4
"
3
1
typ.
3' - 0"
EQ.
4 12947
12958
12947
"
5' - 0"
-0
0"
4'
4'
EQ.
12947
12958
3' - 0"
12958
4'
EQ.
EQ.
3' - 0"
EQ.
EQ.
EQ.
3' - 7 1/2"
EQ.
12947
11533 (2)
13244 (2)
6"
5' - 9 1/4"
12958
"
12946
"
-0
-6
4' - 0"
"
1'
-0
12958
EQ.
3'
1'
5' - 5"
EQ.
0"
11533
13244
8'
12332
4'
4'
4' - 0"
10
-0
11611
12947
4'
4'
12552 (11)
12958
"
-4
11611
11154
EQ.
10
5
EQ.
Project Name:
11611
11404 (6)
6 11419
EQ.
Project Address:
EQ.
EQ.
EQ.
"
-8
6' - 5 1/2"
"
2'
Scale:
Revision Schedule
By
Description
-1
15' - 11 1/2"
Date
7"
2'
(4) x0003
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
2'
Scale: 1/4" = 1'-0"
3/4/2013 12:59:39 PM
Architect of Record
6. Emergency lighting.
12958
12946 4
2'
2"
1/
.
EQ
4"
3/
2'
4"
1/
-8
2"
1/
-0
"
4'
-0
5'
3'
-6
0"
2'
4'
11611 5
.
EQ
12958
(5) x0002
12958
0"
4' 0"
4' -
"
2'
(2) x0002
0"
4' -
-9
1' 9"
1'
Starbucks Coffee
Company
4'
8'
Sheet Title:
Lighting Plan
1/4" = 1'-0"
Scale:
Sheet Number:
I-117
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
Sheet Notes
1. Floor sink/floor drain location. See Penetration Plan I-113
and Plumbing drawings for more information.
2. Place community table per dimensions. Do not bolt to floor.
3. New polished/sealed concrete floor finish and tile base.
Finish floor per manufacturer's instructions.
4. Existing column.
5. Countertop support leg.
Architect of Record
5
typ.
x0034
Rev
Date
Revision Schedule
By
Description
3
typ.
1 typ.
CAFE
SEATING
x0034
EQ.
EQ.
EQ.
EQ.
BACKBAR
3
2
I-508
4
RESTROOM
x0034
x0034
WORKROOM
16
I-508
Floor Legend
1/4" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Wall Base Tile (6" Black)
0
2'
Scale: 1/4" = 1'-0"
3/4/2013 1:00:02 PM
RESTROOM
Project Address:
x0034
VESTIBULE
RETAIL
Project Name:
I-508
4'
8'
1/4" = 1'-0"
Scale:
Sheet Number:
I-118
R
C 2011 Starbucks Coffee Company
Starbucks Coffee
Company
Sheet Notes
5
8
2. New wall tile at backbar where shown. See Interior Elevations and
details 6, 12, 13, &14/I-508.
I-211
2
3. New FRP at exposed backbar walls. Extend from top of base tile to
bottom of adjacent countertops. Tile backsplash to extend to top of
FRP.
2
I-213
8
Architect of Record
10
1
7. Existing column.
I-211
Rev
Date
Revision Schedule
By
Description
9. Corner guard below chair rail. See detail 4 & 15/I-508. See Interior
Elevations for mounting height.
CAFE
SEATING
9
10. Corner guard at backbar wall. See Interior Elevations
I-213
11. New wall tile in restrooms. See Enlarged Restroom Plan and
Elevations.
10
3
9
4
I-212
7
8
4
I-211
RETAIL
8
typ.
I-212
2
3
I-212
I-212
I-212
5
3
1
11
4
RESTROOM
13
8
I-213
13
I-213
I-213
7
I-213
1/4" = 1'-0"
2'
Scale: 1/4" = 1'-0"
3/4/2013 1:00:04 PM
12
I-213
WORKROOM
5
x0019
4'
8'
11
Project Address:
RESTROOM
1
1
6
1
I-401
VESTIBULE
I-211
Project Name:
BACKBAR
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Sheet Title:
Scale:
Sheet Number:
I-119
10017
x0023
3
1' - 2 3/4"
typ.
3' - 10"
12332
2
typ.
12693
x0028
1
Vestibule
opening
EQ.
Sheet Notes
10829
1. Chair rail with vinyl wallpaper below. See detail 5, 7 & 10/I-508.
12247
typ.
4' - 10 1/2"
12247 typ.
11403
13331 (2)
11
12173
EQ.
5' - 0"
12173 typ.
Starbucks Coffee
Company
3' - 0"
x0023
3/8" = 1'-0"
3/8" = 1'-0"
Architect of Record
x0022
EQ.
typ.
EQ.
11611
11611
5209 Lake Washington Blvd NE, Suite 200
Kirkland, WA 98033
t: 425 827 2100 | f: 425 828 6899 | www.fhoarch.com
10017 4
10017 4
10017
4
Rev
Date
Revision Schedule
By
Description
x0022
typ.
1
12173 typ.
12173 typ.
typ.
3' - 0"
12247 typ.
12247 typ.
5
11403
11403
x0022
typ.
Scale:
3/8" = 1'-0"
x0023
x0023
EQ.
10017
EQ.
EQ.
x0030
EQ.
x0029
7
7
9
x0010
4' - 10 1/2"
3/8" = 1'-0"
12
typ.
3' - 0"
x0005
12247 typ.
12173
12482
12173 typ.
5' - 9 1/2"
x0022
11611
x0022
12516
3/8" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
12247
11403
11403
11403
3/8" = 1'-0"
Project Address:
Scale:
Project Name:
5
3/4/2013 1:00:07 PM
5' - 6"
13157
x0011 10
Checked by:
3/8" = 1'-0"
Sheet Title:
Interior Elevations
As indicated
Scale:
Sheet Number:
I-211
10017
6
4
x0023
x0031
x0023
x0023
x0023
9"
9"
13
11162
x0023
3
12173
12173
12173
x0032
12247
12247
12173
12173
12247
Sheet Notes
1. Attach menu hinge to top of cabinet to allow access to
cabinet shelves behind, typical.
12247
14
12247
2. Backbar wall tile runs behind warming station.
3. Chair rail with vinyl wallpaper below. See detail 5, 7 & 10/I508.
3/8" = 1'-0"
11403
11403
11403
3/8" = 1'-0"
11403
11403
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
11162
5' - 0"
5' - 0"
3/8" = 1'-0"
3/8" = 1'-0"
3/8" = 1'-0"
6. Speakers to be mounted at maximum height per cutsheet.
Architect of Record
x0022
Rev
Date
Revision Schedule
By
Description
open to beyond
11403
11403
x0016 10
9
x0015
3/8" = 1'-0"
x0023
x0007
Scale:
3/8" = 1'-0"
5 typ.
12976
13214
12976
13312
12859
12860
x0023
12976
10829
open to beyond
x0027
x0020
x0032
8
14
11403
x0027
3/8" = 1'-0"
x0021
11403
x0012 11
x0023
12
x0017 11
x0011 10
8
x0014
Project Address:
x0015
x0010
Project Name:
7' - 10"
14. Hot rolled steel wall end cap. Finish per schedule.
9
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Backbar
Scale:
3/8" = 1'-0"
3/4/2013 1:00:14 PM
Sheet Title:
Interior Elevations
As indicated
Scale:
Sheet Number:
I-212
12516
x0027
x0027
x0023
x0027
Sheet Notes
open to beyond
x0009
10829
x0013
x0008
Starbucks Coffee
Company
7. Existing door.
14
11469
11403
10473
11469
11403
11403
Drive-Thru POS
Scale:
3/8" = 1'-0"
Drive-Thru Window
Scale:
3/8" = 1'-0"
Drive-Thru Espresso
Scale:
3/8" = 1'-0"
11469
Architect of Record
11611
Rev
11419
11469
Date
Revision Schedule
By
Description
11469
11469
11469
16
10
7' - 0"
13
Scale:
3/8" = 1'-0"
3/8" = 1'-0"
11403
3/8" = 1'-0"
11403
Workroom
Scale:
3/8" = 1'-0"
3/8" = 1'-0"
11469
11419
11469
Project Name:
11469
6
9
15
10820
12
Max.
6' - 0"
11403
Project Address:
11403
17
11403
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
11
11403
9
3/4/2013 1:00:20 PM
Max.
2' - 10"
3/8" = 1'-0"
10462
10
Workroom - Storage
Scale:
Sheet Title:
Interior Elevations
3/8" = 1'-0"
As indicated
Scale:
Sheet Number:
I-213
R
C 2011 Starbucks Coffee Company
10769
1
I-402
10977
Starbucks Coffee
Company
Sheet Notes
10859
10116
10093
10597
10099
I-401
1
4. Stain door to match chair rail.
1
10947
10862
11871
9"
UNISEX
RESTROOM
UNISEX
RESTROOM
9"
10862
2
4
1
I-212
11871
10947
9. Last row of tile. See detail 11/I-508 for tile to wall transition.
10116
10093
10597
5
10099
Architect of Record
10172
10977
10859
Scale:
1
typ.
11
I-508
Revision Schedule
By
Description
Review Revision
typ.
5
x0024
x0024
x0024
x0026
1
9
7
typ.
Restroom at Front
Scale:
3/8" = 1'-0"
11403
11403
3/8" = 1'-0"
11403
11403
Restroom at Door
Scale:
3/8" = 1'-0"
3/8" = 1'-0"
1
typ.
Project Address:
4
8
x0026
x0026
Project Name:
Rev Date
1
12/4/12
1/2" = 1'-0"
1
x0024
10756
Restroom Plan
x0026
10769
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 1:00:25 PM
Sheet Title:
Scale:
Sheet Number:
I-401
Switch
Coat hook
centered on
door
Grab Bar
tur
5' - 0"
7' - 2 5/8"
Lavatory clear
floor space
6"
ius
rad
g
nin
Soap
dispenser
Restroom at Door
3/8" = 1'-0"
4' - 0"
4' - 0"
2' - 9"
1' - 7"
39" - 41"
17" - 19"
9"
2'
Restroom at Side
Scale:
6"
EQ.
Operable handle
opposite wall side
Starbucks Coffee
Company
Sheet Notes
7 1/2"
1' - 0"
EQ.
Water closet
clear floor space
Restroom signage
2' - 0"
39" - 41"
4" Max.
Scale:
3/8" = 1'-0"
Architect of Record
Decorative mirror
Paper towel
dispenser
Rev
Soap
dispenser
3/4" = 1'-0"
1' - 7 3/4"
4' 0" AFF
33"
ABOVE
FLOOR
MAX
6' - 9"
Bottom of
Soap Dispenser
3' - 3"
3/8" = 1'-0"
2' - 10"
Scale:
3' - 0"
1' - 5"
6 1/4" 6 1/4"
1" RADIUS
3/8" = 1'-0"
PRE-DRILLED PER
MANUFACTURERS SCHEMATIC
Restroom at Front
8"
3/4" MEDEX
Scale:
Revision Schedule
By
Description
Project Address:
3/4" = 1'-0"
2 1/4"
Scale:
Restroom Plan
TYP
1' - 5"
2 1/4"
4' - 0"
7' - 0"
2' - 9"
Paper towel
dispenser
Max to Rim
1' - 2"
2' - 10"
4' - 0"
3' - 2"
6"
Date
Project Name:
4"
Center of J Box
5
1' - 3" Min.
I-402
Light sconce
Coat hook
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 1:00:26 PM
Sheet Title:
Restroom Details
As indicated
Scale:
Sheet Number:
I-402
14' - 0"
EQ.
EQ.
1 1/2"
x0004
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
Top of Fixture
7'-3" AFF (VIF)
Community Table
Scale:
2' - 10 1/2"
2' - 0"
x0001
custom table
base per
schedule
1 3/4"
1 1/2"
7 1/4"
3/4" = 1'-0"
#8 screws (G.C. provided)
1"x6"x32" wood blocking (paint to
match wall)
Architect of Record
6' - 11"
Note: Final design to be created by Windfall.
For dimension reference only.
6" = 1'-0"
Rev
1' - 6
"
x0006
Date
Revision Schedule
By
Description
1' - 6"
17' - 7 1/2" R
4
I-501
16' - 1 1/2" R
Metal support leg
Exterior Bench
Scale:
12363
Solid wood
back panel
3/4" = 1'-0"
13331
13191
Install end panel at
outside face only
13191
Elevation
x0005
4' - 3 1/4"
V.I.F.
Section
4
I-502
Project Name:
V.I.F.
Project Address:
5' - 1 3/4"
To top of fixture
Merch Bay
unit
7' - 3"
6' - 3"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 1:00:28 PM
Plan
Custom Banquette
Scale:
1" = 1'-0"
Sheet Title:
Casework Details
3/4" = 1'-0"
As indicated
Scale:
Sheet Number:
I-501
4' - 6 1/2"
Finish Panel
4' - 6 1/4"
Diewall
4' - 5 1/4"
EQ
EQ
EQ
EQ
EQ
EQ
x0010
Top cap
x0012
x0011
x0013
Countertop
Finish Panel
2"
1"
Metal trim to be painted
Metal Frame
Fasteners
#8 x3" (75mm) WD
or equivalent
CMU
NCT
BRICK
2' - 6 1/4"
Notes
Reserve countertop
Architect of Record
Starbucks Coffee
Company
Diewall
Top cap
EQ
6"
Top cap
1' - 0"
Varies
1 : 10
Rev
3/4" = 1'-0"
Date
Revision Schedule
By
Description
6' - 7 1/2"
VERIFY MIN. CLEARANCE FOR TOP OF
MENU SWING BELOW BACKBAR SOFFIT
9"
V.I.F.
Cubby
VARIES
Scale:
3/4" = 1'-0"
x0017
3" = 1'-0"
x0016
x0015
Top cap
3/4" = 1'-0"
Project Name:
1/2"
Project Address:
LIGHT VALANCE
sched.
12100
typ.
3
I-502
per
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
x0008
Concrete Slab with Wall Clip:
Base cabinet to floor anchors to be "Titen HD"
3/8" x 2" when/where available or manufacturer
tested and owner approved substitute.
Anchors to provide working tension capacity of
250lb/100kg and working shear capacity of
50lb/25kg
Isometric View
3/4/2013 1:00:30 PM
Countertop
x0014
3/4" = 1'-0"
Checked by:
8' - 2"
Countertop
Sheet Title:
Casework Details
As indicated
Scale:
3/4" = 1'-0"
Sheet Number:
I-502
5' - 4 1/2"
No backsplash
Backsplash
Modified backsplash
length
R
C 2011 Starbucks Coffee Company
x0009
Ceiling
Modified backsplash
length
ADD 10-01
CBS 01-01
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
Music System
3/4" = 1'-0"
Security Recorder
Dedicated duplex
receptacles for Workstation
at 42" (1070mm) AFF
PC Monitor
Money Counter
1' - 4"
Printer
NOTES
9"
SEISMIC ACCELERATION
CONDITIONS AT THE SITE.
3
5
84"x24" (2130mmx610mm)
painted plywood backer board
3/4" = 1'-0"
Rev
Date
Revision Schedule
By
Description
NOTE:
BOTTOM TWO SHELVES
ARE INSTALLED W/ BRACKETS
DOWN
3/4" = 1'-0"
1
ELECTRICAL OUTLET
2
2' - 2"
Project Name:
Project Address:
V.I.F.
4' - 5 3/4"
V.I.F.
2' - 10"
Quadplex convenience
receptacle at 12"
(305mm) AFF
6"
16"
CHATSWORTH PRODUCTS
#40074-500 SINGLE-SIDED
SHELF, TYP.
Architect of Record
CHATSWORTH PRODUCTS
#1532 1-5 24 HEAVY DUTY
WALL-MOUNT EQUIPMENT
RACK
Manager's CPU
2-Line Phone
6-1/2"
Scale:
73-1/2"
Custom Countertops
Security Monitor
6" 5"
x0020
11"
x0021
6' - 1 1/2"
Amp
3
4
ADJUSTABLE LEGS
TILE BASE
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4" = 1'-0"
Refrigerator - Electrical
Scale:
3/4" = 1'-0"
3/4" = 1'-0"
3/4" = 1'-0"
3/4/2013 1:00:32 PM
Sheet Title:
Casework Details
3/4" = 1'-0"
Scale:
Sheet Number:
I-503
9' - 9"
2' - 2"
2' - 1"
6' - 6"
4' - 0"
10"
3 1/2" 8 1/2"
11"
1' - 11"
C 2011 Starbucks Coffee Company
Countertop (above)
Brew 09 - Electrical
Scale:
Starbucks Coffee
Company
3/4" = 1'-0"
Electrical Components
6' - 7"
2' - 2 1/4"
1' - 1 3/4"
1' - 1"
Architect of Record
3/4" = 1'-0"
Rev
Date
Revision Schedule
By
Description
Optional Blender
Plan View
CBS 01 - Electrical
Scale:
3/4" = 1'-0"
POS 33 - Electrical
Scale:
3/4" = 1'-0"
3/4" = 1'-0"
8' - 2"
1' - 3 3/4"
2' - 5"
7 1/4"
10"
2' - 0 1/4"
Box base
3/4" = 1'-0"
Electrical Components
Countertop (above)
Future Espresso
Machine layout
Cup Caddy
Scale:
3/4" = 1'-0"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Plan View
Sheet Title:
Plan View
3/4/2013 1:00:34 PM
Project Address:
Countertop (above)
Project Name:
Casework Details
3
3/4" = 1'-0"
POS 13 - Electrical
Scale:
3/4" = 1'-0"
Scale:
3/4" = 1'-0"
Sheet Number:
I-504
5' - 0"
C 2011 Starbucks Coffee Company
2' - 6"
1' - 3"
Clear
Starbucks Coffee
Company
1' - 5 1/4"
10"
6"
Double duplex
receptacle for
Refrigerator
and Cup
Labeler at 26"
(660mm) AFF
Back wall
Data Junction
Box for Cup
Labeler at
26" (660mm)
AFF
Receptacle for
Warming
Oven at 26"
(660mm) AFF
1'
-3
Warming 03 - Electrical
4"
3/
Scale:
3/4" = 1'-0"
Architect of Record
3/4" = 1'-0"
Rev
Date
Revision Schedule
By
Description
3/4" = 1'-0"
Back wall
2' - 3 1/4"
5 1/4"
1' - 6 3/4"
9"
Countertop (above)
Receptacle for Instant Hot
Water Tap at 26" (660mm)
AFF
Receptacle for
Undercounter Refrigerator
at 26" (660mm) AFF
1' - 6"
Receptacles for
Espresso Machines at
26" (660mm) AFF
Compartment sink
Project Name:
Wire rack
Sanitizer
4' - 6"
Note:
For coordination only. See
Furniture Fixtures and
Equipment Plan for equipment
locations. Refer to Item
Specifications for more
information.
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Plan View
3/4/2013 1:00:36 PM
1' - 0"
1' - 0"
Project Address:
21"x3" (530mmx75mm)
stub-up penetration area for
Power and Data.
See Electrical Plan for final
location
Plan View
Elevation View
Sheet Title:
Casework Details
2
3/4" = 1'-0"
3/4" = 1'-0"
3/4" = 1'-0"
Scale:
Sheet Number:
I-505
9' - 9"
6' - 10 1/2"
Water
heater
Reserve 03 - Plumbing
Scale:
Brew 09 - Plumbing
Scale:
3/4" = 1'-0"
6' - 7"
Mop holder
1' - 0"
Legs (below)
2' - 0"
Wire rack
5' - 10"
2' - 5 1/2"
Hose clip
ADD 01 - Plumbing
3/4" = 1'-0"
Scale:
3/4" = 1'-0"
Revision Schedule
By
Description
CBS 01 - Plumbing
Scale:
3/4" = 1'-0"
4' - 10 1/4"
8' - 2"
Plumbing Components
See Plumbing Plan for final floor sink location and type.
Coordinate location with support legs
Legs
Countertop (above)
7"x3" (180mmx75mm)
stub-up penetration area.
See Plumbing Plan for
final locations.
Install shut-off valves
between stub-ups and
equipment
Project Address:
Project Name:
2' - 0"
2' - 2 3/4"
Toe Kick
6' - 8 1/2"
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Cold water supply for Metered spoon rinser faucet
Filtered Cold water
supply for Water
Tower Faucet
3/4/2013 1:00:37 PM
Date
Rev
Mop sink
Architect of Record
Faucet
1' - 0"
7 1/2"
3/4" = 1'-0"
1' - 3"
Starbucks Coffee
Company
Legs (below)
Strap units
per local
code, if
needed
Note:
Station intended to share
same floor sink as Espresso
Bar. See Plumbing Plan for
shared location.
3/4" = 1'-0"
Casework Details
Plan View
Legs (below)
Sheet Title:
3/4" = 1'-0"
Scale:
3/4" = 1'-0"
Sheet Number:
I-506
1/2"
*VARIES*
Deep leg
slip track
(if required)
Top track
(if required)
6" min.
2"
GWB as occurs.
6" WALL BASE TILE
EXISTING FLOOR
Starbucks Coffee
Company
1 1/2" = 1'-0"
4'-0" O.C.
1 1/2" = 1'-0"
3" max
Scale:
Note:
- GC to install slip track to structure per
manufacturers recommendations.
Architect of Record
Main Tee
Lighting fixture track attached to
sliding bracket above ACT w/ #12x1
1/2" panhead Sh. Mtl. Screws @ 2'0" O.C
Wall
3" = 1'-0"
Scale:
Vertical
hanging
wire
A
Bottom of Finish
9' - 0" AFF
MAXIMUM LENGTH
8'-6"
10'-0"
11'-6"
15'-0"
45
45
A-A
45
45
Project Name:
1 1/2" = 1'-0"
Seismic Bracing
Project Address:
Soffit Detail
A
Note: install all suspended
ceiling components to comply
with ASCE 7-02, section 9.6
and CISCA-zone 3-4
Scale:
Revision Schedule
By
Description
3" = 1'-0"
Date
45
3/4/2013 1:00:39 PM
90
Rev
Shim as needed
20 GA 3-5/8" steel stud bracing at 48"
O.C. Attach to partition framing with 3/8"
pan head type 'S' screws. GC to verify if
required.
3/4" EMT
2' - 0"
1/2" EMT
1. All 24"x48" ceiling light fixtures and 24"x24" HVAC air registers shall Be supported
by a minimum of (2) hangers at opposite corners. Ceiling system shall not support
other items.
1/2" EMT
2. All interior wall & ceiling finishes shall be installed to Class III Flame Spread or as
required by local building department, whichever is most stringent.
#12 Hanger
wire
Pin thru
hanger wire
Notch
Bottom of Finish
8' - 0" AFF
Main hanger
Per Reflected Ceiling Plan
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Notes:
Angle brackets
Top of Finish
9' - 0" AFF
Store #:
Checked by:
3. 45 degree brace wires and compression studs are to be provided only If required by
local building department.
4. Compression struts: steel section with L/R ratio of 200 maximum. Attach to main
runners with 1/4" machine bolt and to structure with 3/16" diameter power driven stud.
Compression strut shall not replace hanger wire.
Sheet Title:
Design Details
As indicated
Scale:
1 1/2" = 1'-0"
ACT Hanger
Scale:
3/8" = 1'-0"
1" = 1'-0"
Sheet Number:
I-507
Casework
Gypsum wall
3/4"
Vinyl wallcovering
Bullnose sanitary
coved tile base
Bullnose sanitary
coved tile base
Finish Flooring
Flooring Material
Flooring Adhesive
Min 2 1/2"
Scale:
3" = 1'-0"
3" = 1'-0"
3/4"
3" = 1'-0"
Base
3/4" = 1'-0"
6" = 1'-0"
Architect of Record
Vinyl wallcovering applied directly to
wall per Manufacturer's instructions
1"
9
I-508
Latex caulking
4"
EQ
Latex caulking
Gypsum wall
EQ
Starbucks Coffee
Company
Chair rail
8
I-508
Shim as needed
TYP. AFF
Rev Date
1
12/4/12
Revision Schedule
By
Description
Review Revision
Tile base
Tile base
Clear latex caulking
1 1/2" = 1'-0"
Wallpaper Section
Scale:
1 1/2" = 1'-0"
6" = 1'-0"
6" = 1'-0"
10
Wallpaper Elevation
Scale:
1 1/2" = 1'-0"
Cementitious board
G.W.B.
Grout
Cementitious board
Substrate, typ.
Wall tile
Grout
Grout, typ.
Dimension Point
Vinyl wallcovering,
typ. below chair rail
Schluter - Quadec,
aluminum wall tile
finishing edge. Finish:
ABGB - Brushed
Antique Bronze
Anodized Aluminum
Grout, typ.
Wall tile
Cementitious board
Wall tile
11
12
6" = 1'-0"
6" = 1'-0"
13
3" = 1'-0"
14
3" = 1'-0"
15
3" = 1'-0"
Wall tile
Project Address:
Wall tile
Painted wall
Project Name:
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Tub
FRP
3/4/2013 1:00:41 PM
Sheet Title:
Design Details
16
As indicated
Scale:
1 1/2" = 1'-0"
Sheet Number:
I-508
8" Max.
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
Architect of Record
3/8" = 1'-0"
Date
Project Name:
Rev
Revision Schedule
By
Description
Project Address:
45
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 1:00:42 PM
Sheet Title:
Design Details
3/8" = 1'-0"
Scale:
Sheet Number:
I-509
Count
x0004
1
Fixed Multiple Seating
12187
7
12379
12482
x0005
x0006
1
Furniture & Accessories
10756
2
10820
1
12282
16
3/4/2013 1:00:43 PM
12330
Bollard
GC
VD
SB
VD
VD
Bike Rack
DT Speaker Post
Umbrella - Base for Canopy - Silver
MT0021
LL
SB
SB
Description
10605
10809
VD
SB
Design ID
Count
Description
Glazed Doors & Entrances
x0035
1
Door - Single Storefront Metal Frame
Interior Doors
10190
2
Door - Single Flush - 36in 915mm
Description
Comments
Mnfr: Windfall
SB
VD
VD
VD
Mnfr: Windfall
SB
SB
SB
Comments
Design ID
Signage
11305
Count
Description
11392
12732
13157
13163
Signage Schedule
Responsibility
Bulb
Comments
SB
SB
SB
SB
SB
Starbucks Coffee
Company
Architect of Record
SB
Design ID
Count
Bath & Toilet Accessories
10099
2
10172
2
10769
2
10859
2
10862
2
10977
3
SB
SB
SB
SB
SB
SB
SB
SB
SB
SB
GC
SB
SB
SB
SB
Door Schedule
Responsibility
Design ID
Count
Movable Artwork
10093
2
11162
2
12693
1
Furniture Schedule
Responsibility
Comments
GC
Comments
Match existing storefront system
GC
Graphics Schedule
Responsibility
12859
12860
12976
13214
13312
x0028
GC
SB
SB
x0029
VD
x0030
VD
Comments
SB
SB
SB
SB
SB
VD
11115
1
Fire Extinguishers
10501
1
Fire Extinguisher
Food Service - Appliances & Equipment
10102
1
Ice - Bin 590lb
10110
1
Fridge Reach In 1 Door RH - 29in
10267
3
Fridge Undercounter 1 Door - 27in
10312
3
Brewer Soft Heat Single Warming Stand
10344
1
Ice - Bin Drop In 95lb
10473
1
Fridge Undercounter 2 Door - 48in
10527
2
Ice - Bin Drop In 45lb
10672
1
DT Pastry Case Countertop Ambient - 28in
10724
1
Grinder Grindmaster
10746
1
Brewer Soft Heat Dual
10797
1
Pastry Case with Self Serve - 66in Bronze
10856
5
Brewer Soft Heat Server
10967
1
Freezer Reach In 2 Door - 51in
10971
1
Ice - Machine 625lb Air Cooled Side Vent
11083
2
Fridge Reach In 2 Door - 51x35in
11851
1
Brewer Clover
12407
1
Oven TurboChef Next Generation
12508
2
Blender Quiet Model On Counter
12618
1
Fridge Undercounter 1 Door with Shelf 27in 685mm
12631
1
Grinder Ditting KR804
12694
2
Espresso Machine Mastrena
Lockers
10293
1
10 Comp Locker
Office Equipment
10467
1
File Cabinet 2 Drawer
Other Equipment
10091
4
Cup Dispenser Tall Hot Vertical
10182
1
DT Espresso Topping Rail
10314
1
Scale Digital with Adjustable Display
Mount
10396
3
Cup Dispenser Short Hot Vertical
10791
3
Cup Dispenser Grande Venti Cold Vertical
10855
7
Cup Dispenser Grande Venti Hot Vertical
10858
1
Cup Dispenser Tall Cold Vertical
10947
3
Soap Dispenser Wall Mounted
11823
1
Scale Digital for Clover
x0033
1
Mobile Cup Dispenser Caddy
Parts Bins
10305
2
Trash Drop Ring Liner Square - Black
10829
5
Corner Guard - 1.25in - Pewter
x0032
2
Hot Rolled Steel Casing - Pewter
Shelving
10149
2
DT Lid shelf Wall Mounted
10176
1
Rolling Pastry Tray Rack
10222
1
Wire Shelf Grid at Sink
10416
9
Workroom Wire Shelving
10462
9
Workroom Wire Shelving Posts
10698
1
Mop Rack with 3 Holders
10838
1
Rolling Wire Cart for 3 Comp Sink
Solid Waste Handling Equipment
11070
1
Dishwasher Sanitizer
Comments
Rev Date
2
2/22/12
Revision Schedule
By
Description
HVAC/Sign Revisions
SB
SB
SB
SB
SB
SB
SB
GC
SB
SB
SB
SB
VD
SB
VD
SB
SB
SB
SB
SB
SB
VD
SB
SB
VD
VD
SB
SB
SB
SB
SB
SB
VD
SB
SB
SB
SB
SB
SB
SB
SB
SB
VD
VD
VD
SB
SB
SB
SB
SB
OPS
SB
Design ID
Site Schedule
Responsibility
Project Address:
x0018
2
Food Service Equipment
10020
1
Furniture & Accessories
10065
3
Other Site Development
10050
1
10052
1
Site Furnishings
10042
2
10046
1
12139
3
Description
Count
Project Name:
Design ID
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
Sheet Title:
Schedules
Scale:
Sheet Number:
I-601
11403
SB
x0026
382 SF
x0027
611 SF
Design ID
Length
Wall Finishes - Coverings
12173
142' - 9"
Chair Rail - 4in (100mm)
12247
VD
x0019
GC
x0031
8' - 6"
VD
Trim - 4in
VD
11957
11962
3
1
Comments
11977
12007
12008
2
1
Comments
See Casework Finish Schedule for
Material
Flat bar detail to be provided by General
Contractor
Mnfr: 3M 1st surface Black vinyl. Apply film
to entire window
Finish to match chair rail
12011
12019
12023
12032
1
1
1
12033
12034
12043
12057
12078
1
1
3
1
1
12080
12087
4
1
12096
12098
12100
1
2
5
12367
12472
1
1
12516
12640
12780
1
1
1
12816
12845
12854
13355
20
14
2
1
13391
13646
x0007
x0008
1
1
x0009
x0013
1
1
x0014
x0020
x0021
Fixed Casework
12028
12050
12363
12473
13191
13331
x0010
Color Code
Name
x0022
Paint - Bleeker Beige
x0023
Paint - Copley Gray
x0024
Paint - Monterey White
1
2
2
2
2
3
11937
11945
11956
Design ID
Area
11469
1119 SF
1
Description
Finish - Paint
LRV
Responsibility
Comments
7
GC
Benjamin Moore; HC-80
7
GC
Benjamin Moore; HC-140
7
GC
Benjamin Moore; HC-27
Casework Schedule
Responsibility
2
1
2
1
1
2
1
x0011
1
x0012
1
x0015
1
x0016
1
x0017
1
Furniture & Accessories
12335
2
12376
3
Corian
Back Bar Countertops
VD
VD
VD
POS Counterop
Fabric
Banquette Seat
POS Finish Panels
Hafele - #102.81.620
Drawer, Cabinet Pulls
VD
VD
VD
VD
VD
VD
VD
VD
VD
VD
VD
VD
VD
Corian
Backbar
CP0020
Corian
Cafe
CP0020
Corian
Frontbar
CP0020
Corian
Frontbar
CP0020
Corian
Frontbar
CP0020
Cafe
Frontbar
Starbucks Coffee
Company
2401 Utah Avenue South
Seattle, Washington 98134
(206) 318-1575
Plastic Laminate
Backbar
Plastic Laminate
Plastic Laminate
Frontbar
Steel
Steel
Cafe
Backbar
Steel
Steel
Cafe
Backbar
Steel
Cafe
MT0011
Wood
Cafe
WD0001
Wood
Wood
Frontbar
Cafe
WD0016
WD0001
Wood
Frontbar
Wood
Wood
Frontbar
Exterior
Seating
WD0016
Frontbar
WD0016
VD
GC
VD
Hafele #102.81.620
Comments
Hafele - #102.81.620
VD
VD
VD
VD
VD
SB
VD
Finish
Code
Material/Finish
Fabric
Fabric
Corner Guards
Hand Sink, Warming Countertop
VD
VD
Description
Antique Black
Antique Black
Plastic Laminate
Backbar Casework Exterior, Backbar Upper
Cubbies, Condiment Cart, POS, Safe
Cabinet
Core Casework Interior
POS, Frontbar Cabinet Sides
Steel
Banquette Metal Leg
Bar Panel Trim, Coffee Shuttle Shroud
VD
SB
VD
Zone
Comments
L-0016
L-0016
Miscellan
eous
Finish
PL0014
MT0011
MT0011;
MT0028
MT0011
Architect of Record
Rev Date
1
12/4/12
Revision Schedule
By
Description
Review Revision
VD
VD
VD
VD
Based on ID #11902
Based on ID #13023
VD
VD
Based on ID #12073
Based on ID #13327
VD
Based on ID #12771
VD
Based on ID #11979
VD
VD
VD
SB
VD
SB
SB
VD
VD
VD
VD
VD
VD
Based on ID #13321
Based on ID #13304
Based on ID #12766
Based on ID #12762
Based on ID #12765
SB
SB
11142
11155
11902
11917
Length
Description
Location
11915
Design ID
Count
Project Address:
Design ID
Project Name:
Design ID
Area
x0034
1970 SF
Store #:
19548
Project #:
57194-001
Concept:
Heritage
Palette:
Steel Patina
Issue Date:
11/19/12
Design Lead:
Melissa Bodway
Checked by:
3/4/2013 1:00:47 PM
Sheet Title:
Schedules
Scale:
Sheet Number:
I-602