Professional Documents
Culture Documents
vanced throughout the world on both land and water since the first machine was manufactured in 1996. The machine is the first of its kind on the
market. Its amphibian properties make it superior when it comes to work
in and around the borders between land and water. With the correct driving method, the minimal ground pressure of the machine makes it possible to advance without undue damage to the land. Truxor is therefore suitable for use on golf courses, private lots, nature preserves and sensitive
land sites where other machines have difficulty moving.
Truxor is easy to drive, rotates completely around its own axle in water and
has great precision when operating around e.g. docks. The broad
assortment of tools gives the machines great flexibility in different kinds of
work. The quick connection system allows for easy exchange of most tools
and the machines are changed from reed cutters to collectors in the wink
of an eye.
Our machines are delivered with standard hydraulic oil, ISO WG 46.
The machines can also be delivered with environment-friendly oil.
We are pleased to offer two models which are largely similar to each
other. There operating properties differ in the different engines, hydraulic
systems and the optional tools.
Truxor DM 4700 B is our predecessor which has been available on the
market since 1996 and has been continuously up-dated and improved to
become the machine it is today. We recommend this machine for
professionals and entrepreneurs who want a dependable and flexible working machine; primarily for reed cutting and gathering of water plants.
Truxor DM 5000 is our latest model with a stronger engine and a new
hydraulic system allowing use of all tools with the machine as a power
source. In addition to the cutting tools and rakes, we can also offer a new
and broader assortment focusing on oil decontamination and dredging for
this machine.
power
A 34 hp Daihatsu engine with improved placement for easy service
A filter system for ventilation of the radiator
New design
driver's seat.
Adjustable flow for all functions of the hydraulic system
Driving speed:
0-80 m/min.
Front lift: Lifting power
250 kg, DM attachment
for fast exchange of tools.
Material: Pontoons made
of saltwater-durable
aluminium.
The steel construction is
heat galvanized.
Dimension: Length 4.7 m
Width: 2.06 m.
Height: 2.1 m.
Weight: 1350 kg
Equipment: Work
lighting, service tools
TruxorDM4700B is
delivered CE-marked.
Art no. 94-4700B2S
Cutting unit
Doro Cutter 3090/3091
4m
61 kg
1m
95-3090T
Weight
Work width
Cutting depth
Art no.
67 kg
4m
1.4 m
95-3091T
The Doro Cutter 3090 is recommended for normal reed cutting and is usually the obvious
choice in most waters. The cutter is operated
hydraulically and is easily connected to Truxors
equipment bracket. Cutting depth is 1 m. The
knives are exchangeable and the working breadth
may be varied from 2.2 to 4 m. The cutter
requires water for lubrication during work and is
therefore not suitable for use on land.
A stone-triggered system protects it from
breaking the knives against solid objects.
The Doro Cutter 3091 is the same model of
cutter, but has an extended cutting depth of 1.4
Both models are delivered as standard with a
knife work width of 4 metres.
Accessories:
Knife kits
2.1m
68 kg
0.5 m
90-ESM2100
Cutting unit
Doro Cutter ESM 2200
Doro Cutter ESM 2200 cuts and gathers at
the same time which is a good property for
work in small boat harbours and small
streams where the water is constantly in
motion and the gathering work is
facilitates the work considerably. When
using the cutting function only, the
collection net for the cutting bucket can be
disassembled.
approx. 2.1 m
109 kg
2.25 m
0.8 m
90-ESM2200
1.7 m
75 kg
90-ESM1700
Rakes
Reed rake, standard
2 or 3.5 m.
60 kg
94-22500
Work width:
Weight:
Art no.
2 or 3.5 m.
60 kg
94-22500
Springing rake
2.13 m
68 kg
1.3 m
1.7 m
94-47700
2.5 m
30 kg
94-47600
Lifting rake
1.2 m
36 kg
94-68000
The gripping bucket and grip are used to lift plants and sediment from lake bottoms and beaches. The tool
can be combined with a telescopic arm or a mechanical bracket. With the tool attached, the telescope
has a working depth or 1.7 m.
If the work area is primarily beach edges and surface work, a mechanical bracket for the grip and gripping
bucket should be chosen. The work depth will then be approx. 0.9 m. The mechanical bracket has a lower
weight which gives it greater lifting power compared with the telescopic arm.
Dredge pumps
Accessories:
Dredge pumps
Technical data: Dredge Pump 2500
Engine: Briggs & Stratton 23 hp, electric start,
air-cooled. Centrifugal coupling which protects the
pump from overloading.
Capacity: 10-40 m/hour depending on material,
lifting height and the length of the tubing.
Dredging depth: 1600 mm
Length: 1950 mm Weight: 166 kg
Dredge pump 2500 is delivered CE-marked
Dredge pump 2500 is delivered with a standard kit
Art no. 78-2500
Accessories:
Weight:
Capacity:
Working pressure
Max. pressure:
Technical vacuum:
Equipment holder:
Art no.:
Accessories:
Kit for dredging
Telescope
90 kg
12 m/h at 6 bar
6 bar
9 bar
-0.95 bar
Truxor DM 5000
79-3000
Art no. 79-3001
Art no. 94-58400
Excavator
Accessories:
Cultivator
The Doro Miller is used as a restoration miller for wetlands, beaches and lake bottoms.
The miller is available in different work widths; they are exchangeable and can be dismounted
from the operating unit. The operating unit is mounted on the lifting arm.
When water lily roots and other roots are to be removed, a rotary knife is attached using an extension on the lifting arm which gives a work depth of 1.6 m.
Operating unit
Weight 36 kg, Revolutions 0 - 300 r/min
Torque, max 400 Nm
Length: 0.9 m
Equipment carrier: Only Truxor DM 5000
Operating unit Art no. 72-10000
Millers for the Doro Miller
Miller 0.9 m, Weight 33 kg.
Art no. 72-10200
Miller 0.6 m, Weight 23 kg.
Art no 72-10300
Miller 0.4 m, Weight 16 kg.
Art no. 72-10400
Rotary knife for the Doro Miller
Work width 0.8 m
Weight: 14 kg
Art no. 72-10500
Extension for the rotary knife, 0.5 m
Weight: 16 kg
Art no. 72-10100
Oil decontamination
For the Truxor DM 5000 we can offer a new product assortment for oil decontamination.
Doroskimmer 400 can be combined with two types of pumps which take care of both heavy and
thin oil.
Sala Roll Pump can suck heavy sediment and oil without using a large amount of water. It is a pump
that can also be used separately for dredging, or vacuuming oil residues where the Skimmer cannot
reach.
Foilex is a high-capacity pump which gives it advantages when large spills must be decontaminated.
Doroskimmer 400
0.20 m3/h
48 kg
Only Truxor DM 5000
Capacity
Weight
Working pressure
Max. pressure
Technical vacuum
Equipment carrier
Art no.
12 m3/h at 6 bar
90 kg
6 bar
9 bar
-0.95 bar
only Truxor DM 5000
79-3000
Oil decontamination
Volume
Weight
Equip. carrier
Art no.
200 L
14 kg
Truxor DM 5000
79-6000
500 x 220 cm
620 cm
70 cm
630 kg
2500 kg
1870 kg
75-LMT2500
Accessories:
Kit with ramps and clamps
Art no. 75-17100
Our lakes and waterways are overgrown due to overfertilization and much discussed climate
changes. The lakes are acidified preventing the flow of water. By cutting and clearing inlets
and outlets, the lakes can continue to prosper and in many places cutting is performed to improve the flow of water and prevent flooding.
Regular reed cutting allows for increased use of lakes and waterways in the form of available,
navigable waterways, access to fishing, more beautiful views and well-kept bathing sites.
Dorotea Mekaniska AB
We are a company specialising in machines for lake cleaning, marshland and water care. We have delivered and manufactured, developed
products and initiated innovated ideas for 16 years. Today, we have
Sweden's and perhaps even the world's widest assortment of machines
for caring for lakes. We supply everything from the small, simple reed
cutters to the professional machines such as dredgers, excavators, cutters and collectors. Good quality and performance have always been our
motto and we have, through time, gathered experience and a knowledge base which we willingly share with our customers. The factory in
Dorotea has manufacturing, a spare part stock as well as sales. We
have customers and retailers throughout the world. And when the world
is our market, Dorotea is just as central as any other place!
Spare parts for our products are available at Dorotea
Mekaniska AB and at our partners Rajo, in Belgium,
At our web site you will always find the latest news!
Image galleries, films, brochures, etc.
MANUFACTURING/SALES:
North/ South America Sales & Service:
562 Alpha Drive, Pittsburgh PA 15238
Tel: 412 963-9200 / Fax: 412 963-9214
Email: info@megator.com
Website: www.megator.com
Dorotea Mekaniska AB
stra Polarvgen 10
917 32 Dorotea
0942-258 80