Professional Documents
Culture Documents
Measurement/testing
Subcontracting
12.4
Table C.1 item e
Bending test
Test cylinder.
Tanmeasurement
12.4.3
Table C.1 item e
12.4.4
Table C.1 item f
Clause
Measurement/testing
12.4.5
Table C.1 item g
12.4.7.1
Table C.1 item j
12.4.7.2
Table C.1 item k
12.4.4
Subcontracting
12.4.6
12.4.4
Clause
Table C.1 item l
Measurement/testing
Subcontracting
Examination
Annex G
12.4.8
Table C.1 item n
12.4.9
Table C.1 item o
12.5
12.5.1
Clause
Measurement/testing
Subcontracting
Micrometer having either one flat nose and one ball nose, or
one flat nose and a flat rectangular nose 0,8mm wide and
2,4mm long with an accuracy 0,01mm.
12.5.2
12.5.3
Clause
Measurement/testing
Subcontracting
12.5.4
12.5.5
Oven with natural air flow or air flow by pressure, airflow rate:
820 completed air changes per hour; analytical balance with a
sensitivity of 0,1mg; punching dies for dumb-bell test pieces;
desiccator with silica gel or similar material.
12.5.6
12.5.7
R
IEC62067: 2.0 Edition
April 2014
5/10
Clause
Measurement/testing
Subcontracting
12.5.9
12.5.10
Oven with natural air flow or air flow by pressure, airflow rate:
820 completed air changes per hour; grips; weights; system
for measurement of the elongation.
12.5.11
12.5.12
Measurement of carbon black content of Device consists of furnace, combustion boat about 75mm long,
black PE oversheaths (ST3 and ST7)
hard glass/silica / porcelain combustion tube with bore
approximately 30mm and length 40050mm, stopper carrying a
Clause
Measurement/testing
Subcontracting
12.5.14
Annex E
12.5.15
Annex F
Table C.2
13
Table C.2 item b
13.2
Table C.2 item f
Clause
Measurement/testing
Subcontracting
13.2.4
Table C.2 item g
Examination
13.2.5
Table C.2 item h
13.2.6
Table C.3
13.3
Table C.3 item c
13.3.2
see 12.4.3
see 12.4.4
see 13.3.2.4
Tan measurement
see 12.4.5
R
IEC62067: 2.0 Edition
April 2014
8/10
Clause
Measurement/testing
Subcontracting
see 12.4.6
see 12.4.4
see 12.4.7.1
see 12.4.7.2
see 12.4.4
Examination
see 12.4.8
R
IEC62067: 2.0 Edition
April 2014
9/10
Clause
Measurement/testing
Subcontracting
see 12.4.9
see 12.5