Professional Documents
Culture Documents
Pipe Body:
Tubular Assembly:
Nominal
100% RBW
95% RBW
Ultra Class
90% RBW
Premium
80% RBW
5.875
0.320
5.235
5.843
0.304
5.235
5.811
0.288
5.235
5.747
0.256
5.235
921,441
116,743
872,848
110,519
824,520
104,338
728,660
92,107
15,728
8,094
17,076
7,202
16,177
6,299
14,380
4,546
OD (in):
Wall Thickness (in):
Nominal ID (in):
18
0
Note: These are OEM values that may vary with actual values due to mill tolerances, IPC tolerances, OEM rounding, and other
factors. Pipe is purchased at a guaranteed 95% RBW. IPC is applied to a nominal thickness of 0.009''.
Notes: Body properties are calculated based on uniform OD and wall thickness.
Burst capacity for Nominal (100% RBW) based on 87.5% RBW per API.
Connection: VX57
TJ OD (in): 7.250
TJ ID (in): 3.875
MYS (ksi): 135
Elevator Shoulder:
77,700
1,680,000
1,780,000
73,700
1,600,000
1,780,000
N/A
N/A
Note: Elevator capacity based on assumed elevator bore, no wear factor, and contact stress of 110, 100 psi. An increased
elevator shoulder OD increases elevator capacity without affecting make-up torque.
The technical information containted herein, including the product performance sheet and other attached documents, has been extracted from information available from the manufacturer and is for reference only and not a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical
information. Workstrings International cannot assume responsibility for the results obtained through the use of this material. No expressed or implied warranty is intended. Drill pipe assembly properties are calculated based on uniform OD and wall thickness. No safety factor is applied. The information provided for various
inspection classes and for various wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operation limits. It is the responsibility of the customer and the end user to determine the appropriate performance ratings, acceptable use of the product, maintain safe operational practices,
and to apply a prudent safety factor suitable for the application. For API connections that have different pin and box IDs, tool joint ID refers to the pin ID. Per Chapter B, Section 4 VII of the IADC drilling manual, it is recommended that drilling torque should not exceed 80% of MUT.
www.workstringsinternational.com
Download the Workstrings International Pipe Specification App on the App Store or Google Play
08-Sep-15
Size:
Connection:
Pipe grade:
Range:
Performance Datasheet
Drill Pipe
Tension (lbs)
1,400,000
1,200,000
1,000,000
800,000
600,000
400,000
200,000
0
0
20,000
40,000
60,000
80,000
100,000
120,000
140,000
Torque (ft-lbs)
NEW,RBW,PREMIUM Drill Pipe
140,000
120,000
100,000
80,000
60,000
40,000
20,000
0
7-3/8
7-1/4
7-1/8
6-7/8
6-3/4
6-5/8
6-1/2
OD (in)
All data nominal and calculated per standard methods. Vallourec Drilling Products does not assume responsibility for results obtained
through the use of this information. No warranty expressed or implied.
TTO: V10.5b - DP: V1, 2015/02/18, 5875 0.320 VM-165 DP VAM Express VX57 7250 3875 2 135
Vallourec group