You are on page 1of 3

Page 1 of 3

Customer:
Address:

Email:
Phone:
Cell:
Fax:

Date Sent: 1/11/2016


Price Updated: 6/26/2014
Quoted By: Rob Sherman
Phone: 502-587-1930 x121
Email: rob@vendomecopper.com

The systems listed on the following page are designed for low to middle proof
whiskey, bourbon, rum, and vodkas. All of the systems are capable of producing 190
proof in multiple runs. A vodka column is highly recommended if vodka is the desired
product and will be produced from raw materials. Any custom pot still systems that
are not listed or continuous distillation systems please inquire and pricing will be
provided once the design has been established.

All of the continuous systems are custom designed and fabricated upon order. All
equipment is for heavy industrial use and is fabricated in Louisville, Kentucky, USA by
fourth generation coppersmiths. Vendome can fabricate any size or shape to meet
your needs including partial systems. Any other related stainless steel or copper
equipment can also be supplied, such as, fermenters, cookers, whiskey tanks, bottling
tanks, etc. Shipping can be quoted once the design, delivery date, and destination
are established.
Terms are 30% down, 30% due upon receipt of major materials, balance due before
shipment. Prices do not include taxes, if any apply. After receipt of down payment,
fabrication drawings will be supplied to customer for approval prior to start of
fabrication. Pricing is subject to change once final design drawings are approved.
Installation of systems by Vendome personnel is available with pricing provided upon
request.
Vendome will supply serial numbers for all equipment prior to final shipping. It is the
customer's responsibility to obtain all required permits and abide by all state and
federal regulations.
Upon request, we can refer a consultant to help you with all of your startup and recipe
development needs. We also can provide contacts if you require equipment leasing.
Vendome offers a 1-year standard warranty to original purchaser that equipment is
free from defects in material and workmanship only under normal use and service for
one year from date of receipt of equipment.

Vendome Copper & Brass Works, Inc.


Page 2 of 3

CONTINUOUS SYSTEM PRICING


Price

Item
12" Continuous Wash System

Opt.
1

$114,900

$10,400
$11,475
$151,210

$174,200

$242,000

$191,400

$10,520
$9,250
$322,960

1
1

$10,520
$9,250
$8,200
$17,000

14 SS Seive Plates / SS Beer Heater / SS Low Wine Condenser


SS Spirit Safe / SS Low Wine Receiver Tote (Square)
Necessary Connecting Piping w/ Man. Valves, Gauges,& Safety Devices
Option- Copper Condenser / Copper Beer Heater (ADD)
Option- 3-tray Copper Rectifying Sec w/ bypass piping (ADD)

12" Continuous Beer Still w/ Thumper


14 SS Seive Plates / Cu. Beer Heater / Cu. Low Wine Condenser
SS Spirit Safe / SS Low Wine Receiver Tote (Square) Rect section
Cu. Thumper (increases proof and quality for finished product)
Necessary Connecting Piping w/ Man. Valves, Gauges,& Safety Devices

12" Continuous Bourbon Still


14 SS Seive Plates / Cu. Beer Heater / Cu. Low Wine Condenser
split LW HW SS Spirit Safe / SS Low Wine Receiver Tote (Square)
Steam Jacketed Cu. Doubler (increases proof and quality of product)
Cu. High Wine Condenser / SS High Wine Receiving Tote (Square)
Necessary Connecting Piping w/ Man. Valves, Gauges,& Safety Devices

12" Continuous Beer Still w/ Spirit Batch Still


14 SS Seive Plates / Cu. Beer Heater / Cu. Low Wine Condenser
SS Spirit Safe / SS Low Wine Receiver Tote (Square)
250 Gallon Option #3 Batch Still (see Pot Still Price List for Details)
Necessary Connecting Piping w/ Man. Valves, Gauges,& Safety Devices

12" Continuous Wash System w/ Vodka System


14 SS Seive Plates / SS Beer Heater / SS Low Wine Condenser
SS Spirit Safe / SS Low Wine Receiver Tote (Square)
20-Tray Stainless Vodka Column Mtd on top of 250 Gal. SS Pot
Necessary Connecting Piping w/ Man. Valves, Gauges,& Safety Devices
Option- Change Vodka Column (ONLY) to Copper (ADD)
Option- Side Mnt. Vodka Column (decrease height req.) (ADD)

12" Continuous Beer Still w/ Spirit Batch Still/Vodka


14 SS Seive Plates / Cu. Beer Heater / Cu. Low Wine Condenser
SS Spirit Safe / SS Low Wine Receiver Tote (Square)
250 Gallon Option #3 Batch Still (see Pot Still Price List for Details)
20-Tray Stainless Vodka Column Mtd on top of 250 Gal. SS Pot
Necessary Connecting Piping w/ Man. Valves, Gauges,& Safety Devices
Option- Change Vodka Column (ONLY) to Copper (ADD)
Option- Side Mnt. Vodka Column (decrease height req.) (ADD)

Option To Upgrade Beer Still To Copper (ADD)


Option To Side Mount Rect. Sec. (ADD)
Includes SS support stand, alc. Pump and receiver tank

Option To Skid Mount Column, Cond.(s), Pump(s)

$7,200

Vendome Copper & Brass Works, Inc.


Page 3 of 3

MASH COOKER, FERMENTERS, & RECEIVING TANKS


Gallon Charge

Item
Mash Cooker

500
$31,060

1,000
$45,750

2,500
$94,540

5,000
$144,600

1,000
$17,160

2,500
$26,390

5,000
$31,550

10,000
$36,850

$3,840
$12,350
350
$3,210

$4,360
$19,250
550
$3,860

$5,480
$25,290
750
$9,380

$5,020
$29,420
1,000
$17,530

Qty

All Stainless steel w/ pipe legs and feet


Live steam sparger for cooking and CIP spray ball(s) for cleaning
4" drain with valve and top mount electrical Agitator
18", 19", or 20" top manway
External dimple jacket (500 gal ONLY) or internal coils for cooling
Industrial 2B SS finish
Motor Starter not supplied
Qty

Fermenters
All Stainless steel w/ pipe legs or spool base
Open top w/ cooling coils and cone bottom
Industrial 2B SS finish
Option- Closed Top w/ Manway (ADD)
Option- Agitator (requires above option) (ADD)

Receiving Tanks

All Stainless Square IBC Totes (except for 1,000 gallon)


Closed top, cone bottom w/ legs or spool base
Couplings for Sight Glass
Industrial 2B SS finish
Option- Upgrade To Round Tank (except for 1,000 gallon) (ADD)
$6,340
$7,650
Notes:
Continuous wash still requires 25' of head room, a 6' sq minimum roof doghouse would be adequate.
Continuous wash still requires 550LBS per hour of life steam at 15 psi, and will not return any condensate to the boiler.
Continuous wash still requires approx 2gpm of f water

You might also like