Professional Documents
Culture Documents
DATA SHEET
Service
13
14
15
16
172A/B
Doc. No.
200621-172A/B-120D-7
200621-172A/B-120B-1
P&ID. No.
Item
17T45A/B
Work: 1
SPARE: 0
SHEET
1 OF 2
Property Parameters of Material
7 Material Corrosiveness yes no weak
Material nameNPK Raw Materials
8 Material abrasivenessStrongWeakClass
Material particle size<0.5mm 100%
9 Material HygroscopyYes No
Max. particle size0.5 mm
10 Material Propertyacidic alkaline greasy
Bulk density9601040 kg/m3
11 Material moisture content2%
Real density1630 kg/m3
Material tempNormal
: Ambient
12 Angle of repose35
Environmental conditions
Type
Model
1
2
3
4
5
6
Screw Conveyor
CLIENT
PROJ.
UNIT.
SECTION
LS
LS315
Equipment
Conveying capacity(t/h):Normal. 20 max. 30
Transport length :2300 mm
Lifting height:
0 mm
Allow material size:
mm
performances
26 Type of conveyor: Horizontal
longitude fixed
27 Installed type: Horizontal longitude fixed
28 Operation type: reversible non -reversible
0
29 Angle of slope :
Construction of equipment
36 Direction of screw rotation:left right left right
Blade type: entity belt type blade
Filling factor:
37 Casing type:U type 0 type(tube type) rubber
Screw diameter: 315mm
38 Conveying type:reversible non-reversible
Screw pitch:
39 Inlet quantity:singledouble
Screw rotational speed: No Adjustable
40 Outlet quantity:singledouble
Intermediate support type:suspending slide bearing
Screw slope:
41
nil
Driving unit
Driving unit model:
49 Ratio of transmitting member:
Driving unit type: motor-reducer
kW
50 Motor power:
motor and reducer
Driving unit location:head tailmiddle
Reducer type: involute gear worm & worm gear
51
cycloidal pin wheel
Driving unit quantity:single point double point
Ratio of speed reducer:
Power supply:Voltage AC 415V frequency 50Hz
52
phase 3 PH
Transmitting member type:direct coupling belt
chain
53
Miscellaneous
kg
56 Weight of driving unit:
width
height
57 Weight of max repair part:
kg
kg
Screw Conveyor
DATA SHEET
Type
Model
LS
LS315
Service
Screw Conveyor
Item
Work: 1
17T45A/B
SPARE: 0
Scope of supply
CLIENT
PROJ.
UNIT.
SECTION
172A/B
Doc. No.
200621-172A/B-120D-7
P&ID. No.
SHEET
200621-172A/B-120B-1
OF
Note: After filling in all the blank columns, manufacturers shall return these datasheets to the Buyer.
Issue
Date
Design
Checked by Approved by Date
Checked by Approved by
Design
Column written by engineering corporation
Column written by manufacturer