Professional Documents
Culture Documents
Practice Exercises
Mg(s) Mg2+(aq) + 2e
Fe2+(aq) + 2e Fe(s)
Mg(s)|Mg2+(aq)||Fe2+(aq)|Fe(s)
20.1
anode:
cathode:
cell notation:
20.2
anode:
cathode:
overall:
20.3
Al(s) Al3+(aq) + 3e
Ni2+(aq) + 2e Ni(s)
3Ni2+(aq) + 2Al(s) 2Al3+(aq) + 3Ni(s)
20.5
The halfreaction with the more positive value of E (listed higher in Table 20.1) will occur as a reduction.
The halfreaction having the less positive (more negative) value of E (listed lower in Table 20.1) will be
reversed and occur as an oxidation.
(a)
I2(aq) + 2e 2I(aq)
oxidation
Fe3+(aq) + e Fe2+(aq)
reduction
496
Chapter 20
(b)
(c)
20.6
The halfreaction with the more positive value of E (listed higher in Table 20.1) will occur as a reduction.
The halfreaction having the less positive (more negative) value of E (listed lower in Table 20.1) will be
reversed and occur as an oxidation.
Br2(aq) + 2e 2Br(aq)
SO42(aq) + 4H+(aq) + 2e H2SO3(aq) + H2O
Br2(aq) + H2SO3(aq) + H2O 2Br(aq) + SO42(aq) + 4H+(aq)
reduction
oxidation
20.7
Either nickel(II) or iron(III) will be reduced, depending on which way the reaction proceeds. Iron(III) is
listed higher than nickel(II) in Table 20.1 (it has a greater reduction potential), so we would expect that the
reaction would not be spontaneous in the direction shown.
The spontaneous reaction is:
Ni(s) + 2Fe3+(aq) Ni2+(aq) + 2Fe2+(aq)
20.8
The halfreaction having the more positive value for E will occur as a reduction. The other halfreaction
should be reversed, so as to appear as an oxidation.
NiO2(s) + 2H2O + 2e Ni(OH)2(s) + 2OH(aq)
Fe(s) + 2OH(aq) 2e + Fe(OH)2(s)
NiO2(s) + Fe(s) + 2H2O Ni(OH)2(s) + Fe(OH)2(s)
reduction
oxidation
net reaction
5{Cr(s)
-
Cr3+(aq) + 3e-}
+
oxidation
2+
The halfreaction having the more positive value for E will occur as a reduction. The other halfreaction
should be reversed, so as to appear as an oxidation.
3Cu2+(aq) + 2Cr(s) 3Cu(s) + 2Cr3+(aq)
Ecell = Esubstance reduced Esubstance oxidized
o
o
E ocell = E Cu
2+ E
Cr 3+
Ecell = 0.34 (0.74) = 1.08 V
497
Chapter 20
20.11
A reaction will occur spontaneously in the forward direction if the value of E is positive. We therefore
evaluate E for each reaction using:
Ecell = Esubstance reduced Esubstance oxidized
(a)
Br2(aq) + 2e 2Br(aq) reduction
I2(s) + 2e 2I(aq)
oxidation, when reversed
Ecell = EBr2 EI2
Ecell = 1.07 V (0.54 V) = 0.53 V, spontaneous
(b)
A reaction will occur spontaneously in the forward direction if the value of E is positive. We therefore
evaluate E for each reaction using:
Ecell = Esubstance reduced Esubstance oxidized
(a)
oxidation
non-spontaneous
spontaneous
20.13
20.14
G = n F Ecell
From Practice Exercise 11 (a): n = 2 e, Ecell = 0.53 V
G = n F Ecell = (2 e)(96,500 F)(0.53 V) = 102,000 J = 102 kJ
From Practice Exercise 11 (b): n = 5 e, Ecell = 0.71 V
G = n F Ecell = (5 e)(96,500 F)(0.71 V) = 342,600 J = 343 kJ
From Practice Exercise 12 (a): n = 2 e, Ecell = 0.56 V
G = n F Ecell = (2 e)(96,500 F)(0.56 V) = 108080 J = 108 kJ
From Practice Exercise 12 (b): n = 6 e, Ecell = 0.02 V
G = n F Ecell = (6 e)(96,500 F)(0.02 V) = 11,600 J = 11.6 kJ
498
Chapter 20
20.15
RT
Eocell = n F ln K c
0.46 V =
2(96,500 C mol1 )
ln K c = 35.83
Taking the antilog (ex) of both sides of the above equation gives
Kc = 2.7 1016.
ln K c
This very small value for the equilibrium constant means that the products of the reaction are not formed
spontaneously. The equilibrium lies far to the left, favoring reactants, and we do not expect much product
to form.
The reverse reaction will be spontaneous, therefore, the value for Kc for the spontaneous reaction will be:
Cu(s) + 2Ag+(aq) Cu2+(aq) + 2Ag(s)
1
1
K c' =
=
= 3.7 1015
K c 2.7 1016
20.16
Ag+(aq) + e Ag(s)
E = 0.80 V
E = 0.07 V
AgBr(s) + e Ag(s) + Br(aq)
Equation for the spontaneous reaction:
Ag+(aq) + Br(aq) AgBr(s)
Ecell = 0.73 V
1
K=
Ag + Br
ln Kc =
( )(
1
E ocell n F ( 0.73 V ) 1 e 96,500 C mol
=
= 28.43
RT
8.314 J mol 1 K 1 ( 298 K )
Kc = 2.23 10
12
Ecell = E ocell
ln
nF
Cu 2 +
20.18
Ecell = Eocell
2.2 106
= 2.82 V
ln
[0.015]
[1]
RT
ln
2
nF
H+
499
Chapter 20
0.00 = 0.14 V
ln
[1]
H+
20.19
Zn(s) Zn2+(aq) + 2e
Cu2+(aq) + 2e 2Cu(s)
oxidation
reduction
Zn 2+
RT
Ecell = E cell
ln
nF
Cu 2 +
20.20
Ecell = Eocell
ln
nF
Cu 2 +
[ 0.010]
[1.0]
Mg 2 +
ln
[ 0.015]
Mg 2 +
Mg 2 +
ln
0.08 V = 0.0128 ln
[ 0.015]
[ 0.015]
Mg 2 +
6.25 = ln
[ 0.015]
Mg 2 +
e6.25 =
0.015
[
]
[Mg2+] = 2.95 105 M
20.21
Cu(s) Cu2+(aq) + 2e
Ag+(aq) + e Ag(s)
oxidation
reduction
500
Chapter 20
Ecell = Eocell
Cu 2+
RT
ln
2
nF
+
Ag
Cu 2+
= (Eo E )/ RT
ln
cell
cell
2
+
nF
Ag
( 0.46 V
0.57 V )
0.01284
= 8.5670
Cu 2+
20.22
We are told that, in this galvanic cell, the chromium electrode is the anode, meaning that oxidation occurs
at the chromium electrode.
Now in general, we have the equation:
Ecell = Ereduction Eoxidation
which becomes, in particular for this case:
Ecell = ENi2+ ECr3+
The net cell reaction is given by the sum of the reduction and the oxidation halfreactions, multiplied in
each case so as to eliminate electrons from the result:
3 [Ni2+(aq) + 2e Ni(s)]
reduction
2 [Cr(s) Cr3+(aq) + 3e]
oxidation
3Ni2+(aq) + 2Cr(s) 2Cr3+(aq) + 3Ni(s)
net reaction
In this reaction, n = 6, and the Nernst equation becomes:
2
Cr 3+
RT
o
Ecell = E cell
ln
3
nF
2
+
Ni
Cr 3+
= (Eo E )/ RT
ln
cell
cell
3
nF
Ni 2 +
501
Chapter 20
Cr 3+
= ( 0.487 V 0.552 V )
ln
3
0.004279
Ni 2+
Cr 3+
= 15.190
ln
3
2
+
Ni
Cr 3+
2+
Ni
Substituting [Ni2+] = 1.20 M, we solve for [Cr3+] and get: [Cr3+] = 6.6 104 M.
20.23
Fe3+(aq) + e Fe2+(aq)
2I2(s) + e 2I(aq)
O2(g) + 4H+(aq) + 4e 2H2O
Eo = 0.77 V
Eo = +0.54 V
Eo = +1.23 V
The reaction with the least positive reduction potential will be the easiest to oxidize, and its product will be
the product at the anode. I2 will be produced.
20.24
The cathode is always where reduction occurs. We must consider which species could be candidates for
reduction, then choose the species with the highest reduction potential from Table 20.1.
Cd2+(aq) + 2e 2Cd(s)
Sn2+(aq) + 2e 2Sn(s)
2H2O + 2e H2(g) + 2OH(aq)
E = 0.40 V
E = 0.14 V
E = 0.83 V
Tin(II) has the highest reduction potential, so we would expect it to be reduced in this environment. We
expect Sn(s) at the cathode.
20.25
mol OH = 720 C
20.26
The number of moles of Au to be deposited is: 3.00 g Au 197 g/mol = 0.0152 mol Au. The number of
Coulombs (A s) is:
3F
96,500 C
Coulombs = 0.0152 mol Au
= 4.40 103 C
1 mol Au
1F
The number of minutes is:
min =
20.27
1F
1 mol OH
4.40 103 A s
1 min
= 7.33 min
10.0 A
60 s
As in Practice Exercise 26 above, the number of Coulombs is 4.40 103 C. This corresponds to a current
of:
A=
4.40 103 A s
1 min
= 3.67 A
20.0 min
60 s
502
Chapter 20
20.28
mol Cu 2 + = 450 C
1 mol e
1 mol Cu 2 +
A galvanic cell is one in which a spontaneous redox reaction occurs, producing electricity. A halfcell is
one of either the cathode or the anode, together with the accompanying electrolyte.
20.2
The salt bridge connects two halfcells, and allows for electrical neutrality to be maintained by a flow of
appropriate ions.
20.3
These must be kept separate, because otherwise Ag+ ions would be reduced directly by Cu metal, and no
external current would be produced.
20.4
The anode is the electrode at which oxidation takes place, and the cathode is the electrode at which
reduction takes place. The charges of the electrodes in a galvanic cell are opposite to those in the
electrolysis cell; the cathode is positive and the anode is negative.
20.5
In both the galvanic and the electrolysis cells, the electrons move away from the anode and toward the
cathode.
20.6
The anions move away from the cathode toward the anode, and the cations move away from the anode
toward the cathode.
20.7
20.8
A cell potential is a standard potential only if the temperature is 25 C, the pressure is 1 atm, and all ions
have a concentration of 1 M.
20.9
The cell potential for the anode halfreaction is subtracted from the cell potential for the cathode halfcell:
o
o
E ocell = E substance
reduced E substance oxidized
The standard hydrogen electrode is diagramed in Figure 20.5 of the text. It consists of a platinum wire in
contact with a solution having [H+] equal to 1 M, and hydrogen gas at a pressure of 1 atm is placed over the
system. The halfcell potential is 0 V.
20.11
A positive reduction potential indicates that the substance is more easily reduced than the hydrogen ion.
Conversely, a negative reduction potential indicates that the substance comprising the halfcell is less
easily reduced than the hydrogen ion.
20.12
The difference between the reduction potentials for hydrogen and copper is a constant that is independent
of the choice for the reference potential. In other words, the reduction halfcell potential for copper is to be
0.34 units higher for copper than for hydrogen, regardless of the chosen point of reference. If E for copper
is taken to be 0 V, then E for hydrogen must be 0.34 V.
503
Chapter 20
20.13
The negative terminal of the voltmeter must be connected to the anode in order to obtain correct readings of
the voltage that is generated by the cell.
20.14
The metals are placed into the activity series based on their values of standard reduction potentials.
20.15
External circuit
electron flow
(+)
()
Salt Bridge
Ag
Ag+ (aq)
Fe
Fe3+ (aq)
Cathode
Anode
Fe3+(aq) + 3Ag(s)
20.16
External circuit
()
electron flow
(+)
Salt Bridge
Pt
Fe2+(aq)
Fe3+(aq)
Anode
Pt
Br2(aq)
Br(aq)
Cathode
G = nF E cell
20.18
E ocell =
0.0592
log K c
n
504
Chapter 20
20.19
20.20
We begin by separating the reaction into its two halfreactions, in order to obtain the value of n.
Pb(s) + SO42(aq) PbSO4(s) + 2e
PbO2(s) + 4H+(aq) + SO42(aq) + 2e PbSO4(s) + 2H2O
Thus, n is equal to 2, and the equation that we are to use is:
0.0592
log Q
n
0.0592
1
= 2.05 V
log
4
2
2
H + SO 4 2
E cell = E ocell
E cell
20.21
A concentration cell consists of two almost identical halfcells, the two halfcells are composed of the
same substances, but have difference concentrations of the solute species.
[ion ]dilute
Ecell = E ocell RT ln
nF [ion ]conc
E ocell = 0 because the standard cell potential is the reduction potential of the substance being reduce less the
reduction potential of the substance being oxidized, and the two are equal to each other because they are the
same substance.
20.22
anode
cathode
20.23
cathode
anode
20.24
This is diagramed in Figure 20.11. The float inside the hydrometer sinks to a level that is inversely
proportional to the density of the liquid that is drawn into it. This works because the concentration of the
sulfuric acid (and hence the state of charge of the battery) is proportional to the concentration of sulfuric
acid in the battery.
20.25
505
Chapter 20
Several reactions take place at the cathode; one of the important ones is:
2MnO2(s) + 2NH4+(aq) + 2e Mn2O3(s) + 2NH3(aq) + H2O
20.26
anode
cathode
20.27
anode
cathode
The hydrogen is held in a metal alloy, Mg2Ni, which has the ability to absorb and hold substantial amounts
of hydrogen. The electrolyte is KOH.
20.29
anode
cathode
overall reaction
Lithium has the most negative reduction potential of any metal, so it is very easy to oxidize making it an
excellent material for an anode, and it is a very lightweight metal. The major problem with lithium in a cell
is that it reacts vigorously with water. Also, lithium batteries often have a large negative H.
20.31
In a typical primary lithium cell, the electrodes are lithium as the anode and manganese(IV) oxide as the
cathode.
Li Li+ + e
anode
MnO2 + Li+ + e LiMnO2
cathode
Li + MnO2 LiMnO2
net cell reaction
20.32
The electrode materials in a typical lithium ion cell are graphite and cobalt oxide. When the cell is charged,
Li+ ions leave LiCoO2 and travel through the electrolyte to the graphite. When the cell discharges, the Li+
ions move back through the electrolyte to the cobalt oxide while electrons move through the external circuit
to keep the charge in balance.
20.33
20.34
Fuel cells are more efficient thermodynamically, and more of the energy of the reaction can be made
available for useful work provided that the supply of reactants is maintained. The only product formed by
the cell is water.
20.35
In an electrolytic cell, the cathode is negative, and the anode is positive. The opposite is true of a galvanic
cell. An inert electrode is an electrode which does not chemically react in the measurement of
electrochemical data.
20.36
The flow of electrons in the external circuit must be accompanied by the electrolysis reaction. Otherwise
the electrodes would accumulate charge, and the system would cease to function.
20.37
In solid NaCl, the ions are held in place and cannot move about. In molten NaCl, the crystal lattice of the
solid has been destroyed; the ions are free to move, and consequently to conduct current by migrating either
to the anode or to the cathode.
Anode:
2Cl(l) Cl2(g) + 2e
cathode
anode
net cell reaction
506
Chapter 20
Cathode:
Net:
Na+(l) + e Na(l)
2Na+(l) + 2Cl(l) 2Na(l) + Cl2(g)
20.38
oxidation:
reduction:
20.39
It is reduction that occurs at the cathode, and near it, the pH increases due to the formation of OH(aq). At
the anode, where the oxidation of water occurs, the pH decreases due to the production of H+(aq). See the
equations given in the answer to Review Question 20.38. The overall change in pH is 0 since the amount
of H+ formed and the amount of OH formed are equal. K2SO4 serves as charge carriers to balance the
charge that occurs upon electrolysis of the K2SO4 solution.
20.40
One Faraday (F) is equivalent to one mole of electrons. Also, one Faraday is equal to 96,500 Coulombs,
and a Coulomb is equivalent to an Amperesecond:
1 F = 96,500 C and 1 C = 1 As
20.41
The deposition of 0.10 mol of Cr from a Cr3+ solution will take longer than the deposition of 0.10 mol Cu
from a Cu2+ solution because the Cr3+ requires 1.5 times as many electrons for deposition than Cu2+. This
is due to the difference in charges on the two ions.
20.42
The Ag+ solution will give more metal deposited since it is in the +1 state while the Cu2+ solution will give
half as much since the copper is in the +2 state.
20.43
Copper has a larger atomic mass than iron; therefore, the copper will deposit a greater mass of metal. Both
metals are in the same +2 state.
20.44
20.45
Al2O3(s) is dissolved in molten cryolite, Na3AlF6. The liquid mixture is electrolyzed to drive the following
reaction: 2Al2O3(l) 4Al(l) + 3O2(g)
The two halfreactions are:
anode:
cathode:
overall cell reaction
2O2 O2(g) + 4e
Al3+(l) + 3e Al(l)
6O2 + 4Al3+ 3O2(g) + 4Al(l)
507
Chapter 20
20.46
20.47
Sodium is obtained from electrolysis of molten NaCl using the Downs cell. Some of the uses of sodium are
to make tetraethyl lead, for sodium vapor lamps, and as a coolant in nuclear reactors.
Na+ + e Na(l)
Cl 1/2Cl2(g) + e
NaCl(l) Na(l) + 1/2Cl2(g)
20.48
cathode
anode
net reaction
This is shown in a photo and a diagram (Figure 20.24) of the text. Impure copper is the anode, which
dissolves during the process. Pure copper is deposited at the cathode. Anode sludge contains precious
metals, whose value makes the process cost effective.
Typical reactions occurring at the anode are:
Cu(s) Cu2+(aq) + 2e
Zn(s) Zn2+(aq) + 2e
Fe(s) Fe2+(aq) + 2e
The reaction that occurs at the cathode is:
Cu2+(aq) + 2e Cu(s)
20.49
One of the various methods arise diagramed in Figure 20.25 of the text. The physical apparatus influences
the products that are obtained. The cathode reaction is the same in stirred and unstirred cells:
2H2O + 2e H2(g) + 2OH(aq)
The unstirred anode reaction is:
2Cl(aq) Cl2(g) + 2e
The net reaction is:
2NaCl(aq) + 2H2O 2NaOH(aq) + Cl2(g) + H2(g)
In a stirred cell, the Cl2(g) that is produced reacts with the OH(aq) present forming Cl(aq), OCl(aq) and
water. The anode reaction in the stirred cell is therefore,
Cl(aq) + 2OH(aq) OCl(aq) + H2O + 2e
The net reaction in a stirred cell is:
NaCl(aq) + H2O NaOCl(aq) + H2(g)
Review Problems
20.50
20.51
(a)
anode:
cathode:
cell:
Fe2+ Fe3+ + e
3e + 4H+ + NO3 NO + 2H2O
4H+ + NO3 + 3Fe2+ 3Fe3+ + NO + 2H2O
(b)
anode:
cathode:
cell:
2Br Br2 + 2e
2e + Cl2 2Cl
Cl2 + 2Br Br2 + 2Cl
(c)
anode:
cathode:
cell:
Ag Ag+ + e
Au3+ + 3e Au
3Ag + Au3+ 3Ag+ + Au
(a)
anode:
Fe Fe2+ + 2e
508
Chapter 20
cathode:
cell:
Cd2+ + 2e Cd
Fe + Cd2+ Fe2+ + Cd
(b)
anode:
cathode:
cell:
Ag Ag+ + e
2e+ 4H+ + NiO2 Ni2+ + 2H2O
4H+ + NiO2 + 2Ag 2Ag+ + Ni2+ +2H2O
(c)
anode:
cathode:
cell:
Mg Mg2+ + 2e
Cd2+ + 2e Cd
Mg + Cd2+ Mg2+ + Cd
20.52
(a)
(b)
(c)
Cd(s)|Cd2+(aq)|| Au3+(aq)|Au(s)
Fe(s)|Fe2+(aq)|| Br(aq), Br2(aq)| Pt(s)
Cr(s)|Cr3+(aq)|| Cu2+(aq)|Cu(s)
20.53
(a)
(b)
(c)
Zn(s)|Zn2+(aq)|| Cr3+(aq)|Cr(s)
Pb(s), PbSO4(s)|HSO4(aq)||H+(aq), HSO4(aq)|PbO2(s), PbSO4(s)
Mg(s)|Mg2+(aq)||Sn2+(aq)|Sn(s)
20.54
(a)
Sn(s)
20.55
a)
MnO4(aq)
20.56
(a)
(b)
(c)
20.57
(a)
(b)
(c)
20.58
20.59
Br(aq) (c)
(b)
Zn(s)
Au3+(aq)
(d)
(c)
I(aq)
PbO2(s)
(a)
spontaneous
(b)
spontaneous
(c)
spontaneous
(d)
HOCl(aq)
not spontaneous
(b)
E ocell
E ocell
not spontaneous
spontaneous
(c)
20.60
(b)
The halfcell with the more positive E ocell will appear as a reduction, and the other halfreaction is
reversed, to appear as an oxidation:
BrO3(aq) + 6H+(aq) + 6e Br(aq) + 3H2O
reduction
3 (2I(aq) I2(s)+ 2e)
oxidation
BrO3(aq) + 6I(aq) + 6H+(aq) 3I2(s) + Br(aq) + 3H2O
net reaction
509
Chapter 20
The halfreaction having the more positive reduction potential is the reduction halfreaction, and the other
is reversed to become the oxidation halfreaction:
MnO2(s) + 4H+(aq) + 2e Mn2+(aq) + 2H2O
reduction
Pb(s) + 2Cl(aq) PbCl2(s) + 2e
oxidation
MnO2(s) + 4H+(aq) + Pb(s) + 2Cl(aq)
Mn2+(aq) + 2H2O + PbCl2(aq)
net reaction
o
o
E ocell = E substance
reduced E substance oxidized = 1.23 (0.27) = 1.50 V
20.62
The halfreaction having the more positive standard reduction potential is the one that occurs as a
reduction, and the other one is written as an oxidation:
2 (2HOCl(aq) + 2H+(aq) + 2e Cl2(g) + 2H2O) reduction
3H2O + S2O32(aq) 2H2SO3(aq) + 2H+(aq) + 4e oxidation
4HOCl(aq) + 4H+(aq) + 3H2O + S2O32(aq)
2Cl2(g) + 4H2O + 2H2SO3(aq) + 2H+(aq)
which simplifies to give the following net reaction:
4HOCl(aq) + 2H+(aq) + S2O32(aq) 2Cl2(g) + H2O+ 2H2SO3(aq)
20.63
Br2(aq) + 2e 2Br(aq)
E cell = 1.07 V
Cl2(g) + 2e 2Cl(aq)
E cell = 1.36
Since the second of these has the larger reduction halfcell potential, it occurs as a reduction, and the first is
reversed to become an oxidation:
2Br(aq) + Cl2(g) 2Cl(aq) + Br2(aq)
20.64
reduction
oxidation
reduction
oxidation
o
o
E ocell = E substance
reduced E substance oxidized = 2.01 V (0.49 V) = 1.52 V
Since the overall cell potential is positive, we conclude that the reaction is spontaneous in the direction
written.
20.66
510
Chapter 20
Using the equation G = n F E ocell , we have G = n(96,500 C/mol e)(1.69 V) for which we need n.
Upon writing the two halfreactions, i.e.,
MnO4(aq) + 8H+(aq) + 5e Mn2+(aq) + 4H2O
reduction
HCHO2(l) CO2(g) + 2H+(aq) + 2e
oxidation
we see that we need to multiply the reduction halfreaction by 2 and the oxidation reaction by 5 in order to
balance the eqaution:
2MnO4(aq) + 16H+(aq) + 10e 2Mn2+(aq) + 8H2O
reduction
5HCHO2(l) 5CO2(g) + 10H+(aq) + 10e
oxidation
The net reaction has n = 10. So, G = (10 mol e)(96,500 C/mol e)(1.69 V) = 1.63 103 kJ.
20.68
(a)
(b)
(c)
RT
Eocell = nF ln K c
0.54 V =
ln K c
10(96,500 C mol-1 )
ln K c = 210.3
Taking the exponential of both sides of this equation:
Kc = 2.1 1091
20.69
E ocell =
0.0592
log K c
n
0.0592
log K c
n
0.015 V = (0.0592 V/2) log Kc
log Kc = 0.51
Kc = antilog(0.51) = 0.31
Eocell =
20.71
511
Chapter 20
0.0592
log K c
n
+0.13 V = (0.0592 V/4) log Kc
log Kc = 8.78
Kc = antilog(8.78) = 6.08 108.
E ocell =
20.72
This reaction involves the oxidation of Ag by two electrons and the reduction of Ni by two electrons. The
concentration of the hydrogen ion is derived from the pH of the solution: [H+] = antilog (pH) = antilog
(2.10) = 1 102.10 M
2
E cell
Ag + Ni 2 +
0.0592 V
= 2.48 V
log
4
2
+
H
2
= 2.48 V
log
4
2
3
7.9 10
E cell
10
IO3 Cr 3+
0.0592 V
= 0.135 V
log 34
5
30
+
2
H Cr2 O7
10
[0.00017] [0.0015]
0.0592 V
= 0.135 V
log
30
[0.11]34 [ 0.012]5
= 0.135 V
0.0592 V
log 2.19 109
30
= 0.152 V
20.74
2+
RT Mg
Ecell = E cell
ln
n F Cd 2 +
E cell = 1.97
2(96,500 C mol )
ln
[1.00]
Cd 2+
1
Cd 2+
ln(1/[Cd2+]) = 40.498
Taking (ex) of both sides:
1/[Cd2+] = 3.87 1017
[Cd2+] = 2.58 1018 M
20.75
Since the copper halfcell is the cathode; this is the halfcell in which reduction takes place. The silver
halfcell is therefore the anode, where oxidation of silver occurs. The standard cell potential is:
512
Chapter 20
E ocell = E oreduction E ooxidation = 0.3419 V 0.2223 V = 0.1196 V. The overall cell reaction is:
Cu2+(aq) + 2Ag(s) + 2Cl(aq) Cu(s) + 2AgCl(s), and the Nernst equation becomes:
E cell = 0.1196 V
0.0592 V
1
log
2
2
Cu 2+ Cl
1.175 = 0.7889
Fe 2+
ln
[1.00]
ln[Fe2+] = 30.08
[Fe2+] = 8.66 1014 M
20.77
Chapter 20
E cell =
E ocell
H +
0.0592 V
log
2
Cu 2 +
E cell = E ocell
2
0.0592 V
log H +
2
( 2 ) ( Ecell Eocell )
0.0592 V
= log H +
(E
cell
o
E cell
0.0592 V
(b)
)=
log H + = pH
The equation derived in the answer to part (a) of this question is conveniently rearranged to give:
The equation that was derived in the answer to part (a) of this question may be used directly:
pH =
20.78
E =
E ocell
(E
cell
o
E cell
0.0592 V
( 0.645 V
0.3419 V )
0.0592 V
+
RT Ag dilute
ln
n F Ag +
conc
Eo = 0
)=
1
4
Eo = 0.090 V
E =
E ocell
+
RT Ag dilute
ln
n F Ag +
conc
Eo = 0
Eo = 0.105 V
514
= 5.12
Chapter 20
20.79
At 25 C (298 K)
o
E =
E ocell
2+
RT Cu dilute
ln
n F Cu 2 +
conc
Eo = 0
1
4
Eo = 0.090 V
At 75 C (348 K)
Eo = 0
Eo = 0.10 V
20.80
(a)
(b)
(c)
(d)
20.81
20.82
Fe2+(aq) + 2e Fe(s)
0.35 mol Fe2+ 2 mol e/mol Fe2+ = 0.70 mol e
Cl(aq) 1/2Cl2(g) + e
0.85 mol Cl 1 mol e/mol Cl = 0.85 mol e
Cr3+(aq) + 3e Cr(s)
1.25 mol Cr3+ 3 mol e/mol Cr3+ = 3.75 mol e
Mn2+(aq) + 4H2O(l) MnO4(aq) + 8H+(aq) + 5e
2.5 102 mol Mn2+ 5 mol e/mol Mn2+ = 0.125 mol e
(a)
Mg2+(aq) + 2e Mg(s)
(b)
1 mol Mg 2 mol e
mol e = ( 4.75 g Mg )
= 0.391 mol e
24.31
g
Mg
1
mol
Mg
Cu2+(aq) + 2e Cu(s)
1 mol Cu 2 mol e
mol e = ( 45.0 g Cu )
= 1.42 mol e
63.55 g Cu 1 mol Cu
2 mol e
2
= 3.35 g Fe(OH)2
20.83
2Cl(l) Cl2(g) + 2e
The number of Coulombs is: 4.50 A 45.0 min 60 s/min = 1.22 104 C
The number of grams of Cl2 that will be produced is:
1 mol e 1 mol Cl2 70.91 g Cl2
g Cl2 = 1.22 104 C
= 4.46 g Cl2
96,500 C 2 mol e 1 mol Cl
2
Cr3+(aq) + 3e Cr(s)
The number of Coulombs that will be required is:
20.84
515
Chapter 20
1 mol e
The time that will be required is:
1 s 1 hr
hr = 4.73 106 C
= 52.6 hr
2.50 C 3600 s
20.85
= 6.04 hr
1.50 C 3600 s
Mg2+ + 2e Mg(l)
The number of Coulombs that will be required is:
1 mol Mg 2 mol e 96,500 C
Coulombs = ( 45.0 g Mg )
= 3.57 105 C
24.31 g Mg 1 mol Mg 1 mol e
The number of amperes is: 3.57 105 C 7200 s = 49.6 amp
20.86
20.87
Al3+ + 3e Al(s)
The number of Coulombs that are required is:
The number of amperes is: 4.39 109 C 8.64 104 s = 5.08 104 A
(Note: There are 8.64 104 s in 24.0 hr.)
20.88
The electrolysis of NaCl solution results in the reduction of water, together with the formation of hydroxide
ion: 2H2O + 2e H2(g) + 2OH(aq). The number of Coulombs is: 2.00 A 20.0 min 60 s/min = 2.40
103 C. The number of moles of OH is:
1 mol e 2 mol OH
mol OH = 2.40 103 C
= 0.0249 mol OH
96,500 C 2 mol e
20.89
The electrolysis of NaCl solution results in the reduction of water, together with the formation of hydroxide
ion: 2H2O + 2e H2(g) + 2OH(aq). The number of seconds is: 25.0 min 60 s/min = 1.50 103 s.
The number of moles of OH is:
s 96,500 C
2 mol e
OH - = 2.25 x 10 mol OH
0.100 L
2 Cl
Cl2 + 2e
= 0.225 M
516
Chapter 20
1 mol Cl2
mol OH )
= 1.125 x 102 mol Cl2
2 mol OH
Assuming Cl2 and OH- react to make OCl
( 2.25 x 10
OCl- =
20.90
E = 1.66 V
20.91
E = +2.05 V
O2 + 4H+ + 4e 2H2O
E = +1.23 V
Cathode reaction:
E = 0.83 V
Anode reactions:
2H2O O2 + 4H+ + 4e
E = 1.23 V
E = 0.40 V
E = 0.83 V
E = +1.23 V
I2(s) + 2e 2I
20.92
E = 2.06 V
E = +0.54 V
Cathode reaction:
Cd2+ + 2e Cd(s)
Anode reaction:
2I I2(s) + 2e
E = 0.54 V
Net reaction:
E = 0.94 V
E = 0.40 V
E = +0.34 V
E = 0.83 V
517
Chapter 20
2SO42 S2O82 + 2e
E = 2.01 V
2Br Br2 + 2e
E = 1.07 V
+
E = 1.23 V
At the cathode, where reduction occurs, we expect Cu(s). At the anode, where oxidation occurs, we expect
I2(aq).
The net cell reaction would be Cu2+(aq) + 2I(aq) Cu(s) + I2(aq)
20.94
H2(g) + 2OH-(aq)
Eo = 0.83 V
Reactions that are less positive than this cannot occur at the cathode.
Therefore, Al3+, Mg2+, Na+, Ca2+, K+, and Li+ would not be reduced at the cathode.
20.95
O2(g) + 4H+(aq) + 4e
E(oxidation) = 1.23 V
Reactions that are more negative than this cannot occur at the anode.
Therefore, Cl, Au, Br, Pb2+, Mn2+, Cl2, PbSO4, SO42, and F would not be oxidized at the anode.
Additional Exercises
20.96
Now, since 1 watt = 1 J s1, then 2 103 watt = 2 103 J s1, and the time required for this process is:
1s
1 min 1 hr
hr = 1.32 103 J
= 183 hr
3 60 s 60 min
2 10 J
20.97
The initial numbers of moles of Ag+ and Zn2+ are: 1.00 mol/L 0.100 L = 0.100 mol. The number of
Coulombs (A s) that have been employed is: 0.10 C/s 18.00 hr 3600 s/hr = 6.5 103 C. The number
of moles of electrons is: 6.5 103 C 96,500 C/mol = 6.7 102 mol electrons.
For Ag+, there is 1 mol per mole of electrons, and for Zn2+, there are two moles of electrons per mol of Zn.
This means that the number of moles of the two ions that have been consumed or formed is given by:
6.7 102 mol e 1 mol Ag+/1 mol e = 6.7 102 mol Ag+ reacted.
6.7 102 mol e 1 mol Zn2+/2 mol e = 3.4 102 mol Zn2+ formed
518
Chapter 20
The number of moles of Ag+ that remain is: 0.100 0.067 = 0.033 mol of Ag+
The final concentration of silver ion is: [Ag+] = 0.033 mol/0.100 L = 0.33 M
The number of moles of Zn2+ that are present is: 0.100 + 0.034 = 0.134 mol Zn2+
The final concentration of zinc ion is: [Zn2+] = 0.134 mol/0.100 L = 1.34 M
The standard cell potential should be: E ocell = E oreduction E ooxidation = 0.80 (0.76) = 1.56 V
We now apply the Nernst equation:
E cell = E ocell
0.0592 V
1.34
log
2
( 0.33)2
The concentration of Br in solution will be 0.10 M, since the Ksp of AgBr is so small, the amount of
dissociation of AgBr from the electrode will be negligible.
The reduction reaction will be
AgBr(s) + e Ag(s) + Br(aq)
E = 0.070 V
The oxidation reaction will occur at the standard hydrogen electrode.
The net cell reaction is:
2AgBr(s) + H2 2Ag(s) + 2Br(aq) + 2H+(aq)
E cell = 0.070 V 0.000 V = 0.070 V
The potential for the constructed cell is calculated using the Nernst equation:
2
2
0.0592 V
log Br H +
n
0.0592
2
2
E cell = 0.070 V
log [ 0.1] [1]
2
Ecell = 0.070 V (0.0592)
Ecell = 0.129 V
E cell = E ocell
20.99
Chapter 20
Ecell =
E cell
E = 0.44 V
E = 0.00 V
E cell = 0.44 V
Fe2 +
0.0592 V
log
2
n
H+
[Fe2+] = 0.12 M
[H+] is from the ionization of acetic acid
H + C 2 H 3O 2
= 1.8 105
Ka =
HC2 H3 O 2
[H+] = x
[C2H3O2] = x
[ x ][ x ]
1.8 105 =
[0.18 x ]
[HC2H3O2] = 0.10 x
[0.12]
0.0592 V
log
2
2
1.8 103
520
Chapter 20
(b)
(c)
20.103
F2
Cl2
Br2
I2
+2.87
+1.36
+1.07
+0.54
Electron
Affinitiy
(kJ.mol)
-328
-348
-325
-295
Li+
Na+
K+
Rb+
Cs+
-3.05
-2.71
-2.92
-2.93
-2.92
-60
-53
-48
-47
-45
520
496
419
403
376
1.0
1.0
0.9
0.9
0.9
Mg2+
Ca2+
Sr2+
Ba2+
-2.32
-2.76
-2.89
-2.90
+230
+155
+176
+50
738
590
549
503
1.3
1.1
1.0
0.9
Eo (V)
521
Ionization
Energy1
(kJ/mol)
1682
1251
1140
1008
Electronegativity
4.1
2.9
2.8
2.2
Chapter 20
(1) wiki.chemeddl.org
(a) Reduction potentials decrease in the same order as electronegativity and ionization energy. Electron
affinity follows no pattern.
(b) Reduction potentials and the properties decrease going down the family, though Li is out of order due to
its small size and larger effective nuclear charge compared to the other members of the family.
(c) Reduction potentials and the properties decrease going down the family though the electron affinity
value for Sr2+ is out of order.
20.104
RT
ln Cl
nF
(8.314 J mol1K 1 )(298 K)
0.0532 V = 0.2223 V
ln Cl
1(96,500 C mol1 )
E cell = Ecell
0.1691 V =
ln Cl
6.586 = ln Cl
1.379 103 = Cl
Fe2 + Ag +
0.0592 V
log
1
Fe3+
5.5 104 3.8 102
0.0592 V
= 0.03 V
log
1
1.2 103
= + 0.07 V
E cell =E ocell
E cell
As stated, being a galvanic cell, and using conventions in cell notation, the left-side halfcell is the anode
and negatively charged, and the rightside halfcell is the cathode and positively charged. The equation for
the spontaneous cell reaction is Fe3+(1.2 103 M) + Ag(s) Ag+(5.5 104 M) + Fe2+(0.038 M). This is
an example of a concentration cell.
Multi-Concept Problems
20.106 The electrolysis of NaCl solution results in the reduction of water, together with the formation of hydroxide
ion: 2H2O + 2e H2(g) + 2OH(aq). The number of Coulombs is: 2.00 A 20.0 min 60 s/min = 2.40
103 C. The number of moles of OH is:
1 mol e 2 mol OH
mol OH = 2.40 103 C
= 0.0249 mol OH
96,500 C 2 mol e
522
Chapter 20
The volume of acid solution that will neutralize this much OH is:
1 mol HCl 1000 mL HCl
mL HCl = 0.0249 mol OH
= 40.1 mL HCl
1 mol OH 0.620 mol HCl
20.107 The electrolysis of NaCl solution results in the reduction of water, together with the formation of chlorine
gas and hydroxide ion: 2Cl(aq) Cl2(g) + 2e. The number of Coulombs is: 2.50 A 15.0 min 60
s/min = 2.25 103 C. The number of moles of Cl2 gas collected is:
1 mol e 1 mol Cl 2
mol Cl2 = 2.25 103 C
= 0.0117 mol Cl2
96,500 C 2 mol e
L atm
298 K )
( 0.0117 mol ) 0.0821 mol
nRT
K (
= 0.299 L = 299 mL
=
P
1 atm
( 750 torr 23.76 torr )
760 torr
20.108 2H+(aq) + 2e H2(g)
The number of Coulombs is: 15.00 min 60 s/min 0.750 C/s = 675 C.
The number of moles of H2 is:
V=
1 mol e 1 mol H 2
mol H 2 = ( 675 C )
= 3.50 103 mol H 2
96,500 C 2 mol e
L atm
293 K )
( 0.00350 mol ) 0.0821 mol
nRT
K (
= 0.0870 L = 87.0 mL
=
P
1 atm
735
torr
(
)
760 torr
20.109 In the iron halfcell, we are initially given:
0.0500 L 0.100 mol/L = 5.00 103 mol Fe2+(aq)
V=
The precipitation of Fe(OH)2(s) consumes some of the added hydroxide ion, as well as some of the iron
ion: Fe2+(aq) + 2OH(aq) Fe(OH)2(s). The number of moles of OH that have been added to the iron
halfcell is:
0.500 mol/L 0.0500 L = 2.50 102 mol OH
The stoichiometry of the precipitation reaction requires that the following number of moles of OH be
consumed on precipitation of 5.00 103 mol of Fe(OH)2(s):
5.00 103 mol Fe(OH)2 (2 mol OH/mol Fe(OH)2) = 1.00 102 mol OH
The number of moles of OH that are unprecipitated in the iron halfcell is:
2.50 102 mol 1.00 102 mol = 1.50 102 mol OH
Since the resulting volume is 50.0 mL + 50.0 mL, the concentration of hydroxide ion in the iron halfcell
becomes, upon precipitation of the Fe(OH)2:
[OH] = 1.50 102 mol/0.100 L = 0.150 M OH
We have assumed that the iron hydroxide that forms in the above precipitation reaction is completely
insoluble. This is not accurate, though, because some small amount does dissolve in water according to the
following equilibrium:
Fe(OH)2(s) Fe2+(aq) + 2OH(aq)
523
Chapter 20
This means that the true [OH] is slightly higher than 0.150 M as calculated above. Thus we must set up
the usual equilibrium table, in order to analyze the extent to which Fe(OH)2(s) dissolves in 0.150 M OH
solution:
I
C
E
[Fe2+]
+x
+x
[OH]
0.150
+2x
0.150+2x
The quantity x in the above table is the molar solubility of Fe(OH)2 in the solution that is formed in the iron
halfcell.
Ksp = [Fe2+][OH]2 = (x)(0.150 + 2x)2
The standard cell potential is:
o
E ocell = E oreduction E oxidation
= 0.3419 V (0.447 V) = 0.7889 V
The Nernst equation is:
E cell =
E ocell
Fe2+
RT
ln
nF
Cu 2+
1.175 = 0.7889
Fe 2+
ln
1.00
[ ]
ln[Fe2+] = 30.07
[Fe2+] = 8.72 1014 M
This is the concentration of Fe2+ in the saturated solution, and it is the value to be used for x in the above
expression for Ksp.
Ksp = (x)(0.150 + 2x)2 = (8.72 1014)[0.150 + (2)(8.72 1014)]2
Ksp = 1.96 1015
20.110 The desired reaction is:
AgBr(s) Ag+(aq) + Br(aq)
While this does not look like an oxidation-reduction reaction, we can use Hesss law and the half-reaction
provided in the problem to construct the desired reaction. Reverse the direction of the first reaction and
keep the second reaction in the given direction. Be sure to change the sign of the cell potential when the
reaction direction is changed.
Ag
Ag+ + e
Eo = 0.80 V
AgBr
Ag + Br + e
Eo = + 0.07 V
524
Chapter 20
AgBr
Now use the Nernst equation to determine the equilibrium constant for the reaction.
At equilibrium, Ecell = 0
0.0592 V
log Ag + Br
1
- 0.73 V
= 12.3
log Ag + Br = log K sp ( AgBr ) =
0.0592V
K sp = 4.7 x 1013
E cell =E ocell
1 mol 1 mol e
Coulombs = 0.288 mmol x
96,500 C
= 27.8 C
1 mol e
1 mol 1 mol e
Coulombs = 0.318 mmol x
96,500 C
= 30.7 C
1 mol e
1s
seconds = ( 30.7 C )
= 61.4 s
0.500 C
The range of time is thus, 55.6 to 61.4 seconds to precipitate the chloride ions as AgCl.
The electrolysis of NaCl solution results in the reduction of water, together with the formation of hydroxide
20.112
ion: 2H2O + 2e H2(g) + 2OH(aq). The number of seconds is: 25.0 min 60 s/min = 1.50 103 s.
The number of moles of OH is:
0.250 mol H +
mol OH = 15.5 mL H +
1000 mL H +
1 mol OH
1 mol H +
= 3.87 10 mol OH
2 mol e
Coulombs = 3.87 103 mol OH
2 mol OH
525
96,500 C
= 3.74 102 C
1
mol
e
Chapter 20
20.113
1
H 2 ( g ) + O 2 ( g ) H 2 O(g)
2
o
o
GT H 289 - TSo298
1000 J
1
1
- 383 K{(1 mol H 2 O)(188.7 J mol K )
kJ
1
2
( 2.248 x 10 J ) 1Jwatt
= 2.248 x 10
s
5
watt s
Therefore, one mole of hydrogen gas will produce 224.8 kW s. We want enough hydrogen gas to
produce 1 kW s.
The mass of H2, at 100% efficiency would be:
1 mol H 2 2.02 g
3
= 8.98 x 10 g H 2
224.8 kW s mol H 2
(1 kW s )
8.98 x 103 g
= 1.28 x 102 g H 2
0.70
526