Professional Documents
Culture Documents
Fans
Systemair 2011. Systemair reserves the right to make technical changes. For updated documentation, please refer to www.systemair.com.
34
1H & 2H
Introduction
Adjustable, single and double deflection blade grilles suitable for duct,
ceiling and sidewall applications for most commercial projects, Grille
vanes are individually adjustable to allow jet spread or deflection to
be set with in 45 of the duct axis.
Description : Manufacture
All grilles are constructed from high quality aluminium alloy extrusions
with cleated and mitred frames. Vanes in single or double banks are
individually adjustable. Blades are held in position with stainless steel
spring wire for long life.
Types
Series 1 grilles have a single set of adjustable vanes which can
be horizontal(1H) grilles have 2 sets of vanes, the front set being
horizontal(2H).
Sizes
Minimum size = 150 x 150
Maximum size = 1200 x 600
Standard increments 50mm.
Dimensions
Features
Single or double deflection for complete air pattern control.
All aluminium construction.
Teardrop blade for quiet operation but maximum induction.
Screw or concealed fixing.
Wide size range.
Finishes
Standard : Epoxy Polyester Powder Coated off white/pure white.
Other powder coating finishes available on request.
Accessories
OBSS-opposed blade dampers.
ED-equalising deflectors.
Specification
Adjustable supply grilles shall be 1H, or 2H and shall have mitred
frames. Vanes shall be teardrop shaped and all vanes shall be
individually adjustable.
Installation
Fixing options and border styles are detailed on page 68 & 69.
Ordering
Designation Standard
Grille Nominal Nominal
Border
Type Width Height Style
(mm)
(mm)
Fixing
Accessories
Note : Add 43mm to stack depth for fully open OBSS when fitted.
Width
Heigh
Fixing
35
36
1V & 2V
Introduction
Adjustable, single and double deflection blade grilles suitable for duct,
ceiling and sidewall applications for most commercial projects, Grille
vanes are individually adjustable to allow jet spread or deflection to
be set with in 45 of the duct axis.
Description : Manufacture
All grilles are constructed from high quality aluminium alloy extrusions
with cleated and mitred frames. Vanes in single or double banks are
individually adjustable. Blades are held in position with stainless steel
spring wire for long life.
Types
Series 1 grilles have a single set of adjustable vanes which can
be horizontal(1V) grilles have 2 sets of vanes, the front set being
horizontal (2V).
Sizes
Minimum size = 150 x 150
Maximum size = 1200 x 1200
Standard increments 50mm.
Dimensions
Features
Single or double deflection for complete air pattern control.
All aluminium construction.
Teardrop blade for quiet operation but maximum induction.
Screw or concealed fixing.
Wide size range.
Finishes
Standard : Epoxy Polyester Powder Coated off white/pure white.
Other powder coating finishes available on request.
Accessories
OBSS-opposed blade dampers.
ED-equalising deflectors.
Specification
Adjustable supply grilles shall be 1V, or 2V and shall have mitred
frames. Vanes shall be teardrop shaped and all vanes shall be
individually adjustable.
Installation
Fixing options and border styles are detailed on page 68 & 69.
Ordering
Designation Standard
Grille Nominal Nominal
Border
Type Width Height Style
(mm)
(mm)
Fixing
Accessories
Note : Add 43mm to stack depth for fully open OBSS when fitted.
Width
Heigh
Fixing
37
44
AL-Series
Introduction
Linear bar grilles have been designed to satisfy air diffusion and
engineering requirements as well as architectural specifications. Linear
grilles may be used in modular or continuous situations for ceiling,
side wall, cill or bulkhead applications. The range is available with a
wide variety of special options and fabrications to suit most project
requirements. Grilles can also be supplied with non standard frames /
borders as per the special requirements.
Description : Manufacture
All linear grilles are constructed from extruded aluminium sections
fabricated into modular assemblies using expanded tube production
techniques. Frames are mitred and cleated.
Types
The various types availbale are shown on page 45.
Sizes
Standard
Standard
Finishes
Standard: Epoxy Polyester Powder Coated off white/pure white.
Other powder coating finishes available on request.
Accessories
OBSS - opposed blade dampers.
ED - equalising deflectors.
Removable core grilles (RGC/RGS).
Performance
Supply grilles
Exhaust grilles
Installation
Fixing options and border styles are shown on pages 68 & 69.
Features
All aluminium construction.
Wide core range to satisfy engineering and architectural
specifications.
Tubed construction to provide attractive recessed vertical support.
Wide range of special options.
Cores only (grilles without frames and grilles with frames /
borders) as per special requirements.
Specification
Linear supply and return/exhaust grilles shall be AL type constructed
with tubed cores and cleated frames.
Ordering
Designation Standard
Grille Construction Nominal Nominal
Border
Type Type Width Height Style
(mm)
(mm)
Fixing
Accessories
For continuous grilles indicate 2 side flange only. for grilles with end
flanges indicate 3 side flange LHS/RHS
Specify number required, finish and special requirements separately
Legend
Grille Type
Accessories
Construction type
: C = Complete unit
L = Left unit
M = Middle unit
R = Right unit
Width
Height
Fixing
Border Style
Grilles with front horizontal fixed bar and rear verticle adjustable blades are available as below:
AL2 Front fixed bar 5mm thk. & 0 deg.
AL25 Front fixed bar 5mm thk. & 30 deg.
ALG2 Front fixed bar 3mm thk. & 0 deg.
ALJ2 Front fixed bar 3mm thk. & 15 deg.
Note:
1.
Add 43mm to all stack depths when grilles are fitted with OBSS/ED controls.
2.
See page 68 for alternative removable core grille frames Model RGC/RGS.
45
46
Performance
Linear Bar Supply Grilles Model AL1, AL15, ALG & ALJ
Linear Bar Exhaust Grilles Model AL1, AL15 , ALF, ALG & ALJ
47
48
Introduction
Series 3 vaned grilles and GC5, TEX, PER mesh grilles have been
designed to satisfy all exhaust applications in HVAC systems. The
various cores may be selected to satisfy both engineering and
architectural requirements.
Description : Manufacture
Frames are constructed from high quality aluminium alloy extrusions
which are mitred and cleated. Cores are constructe from aluminium
extrusions supported on integral aluminium tubes.
Types
Grille types are shown in the diagrams below.
Sizes
Standard - Minimum size = 100 x 100
- Maximum size = 1200 x 1200
Finishes
Standard (a) Epoxy Polyester Powder Coated off white/pure white.
Other powder coating finishes available on request.
Acessories
OBSS - Opposed blade dampers
ED - Equalising deflectors
Installation
Fixing options and border styles are shown on pages 68 & 69.
Features
Wide core range to suit architectural and engineering Specifications.
Two border styles available.
Specification
Exhaust grilles shall be type 3HG having mitred frames. Vaned grilles
shall have fixed bars secured firmly on tube supports.
Ordering
Designation Standard
Grille Nominal Nominal
Border
Type Width Height Style
(mm)
(mm)
Fixing
Accessories
Accessories
Width
Height
Fixing
Border Style
49
50
CSF (RS1)
Function
CSF (RS1) linear slot diffusers are designed for cooling or heating in
standard office height of min 2.5m to 3.5m. Ideal supply temperature
to ambient should not exceed 10K to ensure low terminal velocities
in the occupied zone. Exceeding these guidelines can result in draft
in occupied zone or stagnant heated air below the ceiling. CSF (RS1)
slot diffusers have deflectors which been designed to have non-vision
construction. These deflectors are as standard black and slide from left
to right easily to assure a good air outlet pattern adjustment.
Design
CSF (RS1) slot diffusers are manufactured from profiled aluminium
and have as standard black deflectors and hit and miss damper in
galvanized steel. Slot diffusers are painted to RAL 9010 as standard.
Available on request in anodized aluminum satin finish.
Mounting
Slot diffusers contain a mounting bridge as standard which can be
mounted directly inside the duct, or to be easily mounted to the
plenum box.
Optional extra
Insulated and non-insulated plenum box.
Selection table
Table below shows the general product performance for more details
please see selection software or contact your local Systemair office
Adjustment of damper
Quantity of boxes*d
No
Slots
6001500
(mm)
G
opening
15012000
(Qty)*(mm)
(mm)
221
76
53
1x125
2x125
76
60
272
114
91
1x160
2x160
94
98
152
129
136
190
167
174
228
205
266
243
5
6
374
1x200
2x200
114
212
250
51
52
60
80
100
180
200
250
300
400
500
600
700
800
(l/s)
17
22
28
50
56
69
83
111
139
167
194
222
Dim.
600-1
900-1
1200-1
600-2
1500-1
900-2
600-3
1200-2
600-4
900-3
1500-2
1200-3
900-4
1500-3
1200-4
1500-4
0.01794
0.02391
0.02690
0.02989
0.03587
0.04484
0.04783
0.05978
1.2
Ak (m )
0.00598
0.00897
0.01196
0.01495
Vk (m/s)
2.8
1.9
1.4
1.1
0.9
L (m)
1.5
1.2
1.0
pt (Pa)
19
dB(A)
27
<20
<20
<20
Vk (m/s)
3.7
2.5
1.9
1.5
1.2
L (m)
2.4
2.0
1.7
1.5
1.4
1.2
pt (Pa)
54
21
14
dB(A)
41
33
27
23
<20
<20
<20
Vk (m/s)
6.5
4.3
3.3
2.6
2.2
1.6
1.4
1.3
1.1
L (m)
3.4
2.8
2.4
2.2
2.0
1.7
1.6
1.5
1.4
pt (Pa)
106
41
28
18
15
11
dB(A)
51
42
37
32
29
23
21
<20
<20
Vk (m/s)
5.6
4.2
3.3
2.8
2.1
1.9
1.7
1.4
1.1
1.0
L (m)
3.6
3.1
2.8
2.5
2.2
2.1
2.0
1.8
1.6
1.6
pt (Pa)
68
46
30
24
18
13
dB(A)
49
44
39
36
30
27
25
24
<20
<20
Vk (m/s)
6.2
4.6
3.7
3.1
2.3
2.1
1.9
1.5
1.2
1.2
L (m)
4.0
3.5
3.1
2.8
2.4
2.3
2.2
2.0
1.8
1.7
pt (Pa)
84
57
36
30
22
16
dB(A)
52
47
42
38
33
30
28
27
22
21
Vk (m/s)
5.8
4.6
3.9
2.9
2.6
2.3
1.9
1.5
1.5
1.2
L (m)
4.3
3.9
3.5
3.1
2.9
2.7
2.5
2.2
2.2
1.9
pt (Pa)
89
57
47
34
24
14
13
dB(A)
53
48
45
39
37
34
33
28
27
23
Vk (m/s)
5.6
4.6
3.5
3.1
2.8
2.3
1.9
1.7
1.4
L (m)
4.6
4.2
3.7
3.5
3.3
3.0
2.7
2.6
2.3
pt (Pa)
82
68
49
35
20
19
13
11
dB(A)
53
50
44
42
40
38
33
32
28
Vk (m/s)
4.6
4.1
3.7
3.1
2.5
2.3
1.9
L (m)
4.9
4.6
4.4
4.0
3.6
3.5
3.1
pt (Pa)
87
62
35
34
23
20
13
dB(A)
52
50
47
46
41
40
36
Vk (m/s)
4.6
3.9
3.1
2.9
2.3
L (m)
5.5
5.0
4.5
4.3
3.9
pt (Pa)
55
53
36
32
20
dB(A)
54
52
48
46
42
Vk (m/s)
3.7
3.5
2.8
L (m)
5.4
5.2
4.6
pt (Pa)
52
45
29
dB(A)
53
51
47
Vk (m/s)
4.1
3.3
L (m)
6.1
5.4
pt (Pa)
62
40
dB(A)
56
51
Vk (m/s)
3.7
L (m)
6.2
pt (Pa)
52
dB(A)
55
Symbols
Q (m3/h) = Air flow
AK(m2) = Effective area
Vk(m/s) = Effective supply velocity
L (m) = Throw of the air jet
Pt(Pa) = Total pressure drop
dB(A) = Sound power level
53
CSF
Introduction
The continuous slot diffusers series CSF has
for many years set the industry standard in
terms of highest aerodynamic and acoustic
performance. The model CSF range is ideally
suited to variable volume applications due
to its excellent low flow rate air diffusion
characteristics and high air handling capacity.
The novel air pattern control element design
allows any air pattern to be produced from 2
way horizontal iffusion to vertical projection,
without any change in the facial appearance.
CSF diffusers are suitable for all commercial
and industrial projects requiring single or
multislot diffusers for ceilings, bulkheads or
sidewall supply and exhaust.
Description : Manufacture
Diffusers are fabricated from high grade
aluminium alloy extrusions fixed or clipped to
cross stays allowing easy removal of internal
vanes and pattern control elements.
Sizes
Standard - from 1 to 8 slots wide.
- 1800mm long (excluding ends)
- continuous diffuser lengths are
supplied in sections for buttjoining on-site. (alignment strips
supplied).
Special
Finish
Standard:Epoxy Polyester Powder Coated off
white/pure white.
Other powder coating finishes available on
request.
Ordering
Type Length No Slots Accessories
CSF 6000 2
ENDS
Legend
Type
Length
Features
High air handling capacity
Specification
Linear slot diffusers shall be CS-F
incorporating two flow control vanes fixed
to a central pattern control element on each
slot. The air pattern shall be adjustable from
horizontal to vertical without changing the
appearance of the diffusers.
Special
To provide finer control of the air pattern,
flow control vanes may be supplied in any
specified lengths.
54
Dimensions
Number of Slots
1
76
114
152
190
228
266
304
343
57
95
133
171
209
247
285
324
40
79
117
155
193
231
269
307
Accessories
End flanges, mitred corners horizontal or vertical 300 x 300mm.
Installation
Typical installation details
ducted supply & exhaust
55
56
DSL
Introduction
Large format linear diffusers are ideal for most commercial supply
and exhaust systems and integrate well with ceiling tile and lighting
layouts. The clean design provides an extremely low air resistance
characteristic and this makes the diffuser ideal for any fan coil or
induction system which is pressure sensitive. Single or multislot
diffusers are available with fixed 1 or 2 way air patterns; multi-slot
2 way diffusers may be adjusted to suit site conditions by changing
vanes. Pattern control vanes may be easily removed for installation,
access or cleaning. A range of plenum chambers to suit DSL diffusers
is available as an option.
Dimensions
Description : Manufacture
Diffusers are constructed from high grade aluminium alloy extrusions
fixed or clipped to cross stays. Internal vanes are removable for
installation purposes.
Types
DSL - One way discharge
DSL-D - Two way discharge
Sizes
Standard - Single or multislot.
Standard length = 1200mm (For site butt joining).Shorter
Modular lengths to suit.
Special
Features
Ultra low pressure loss characteristics suited to fan coil
and induction supply systems.
Type
DSL-1
46
89
70
DSL-2
84
127
108
DSL-3
122
165
146
DSL-4
160
203
184
DSL-5
198
241
222
DSL-6
237
279
260
DSL-7
275
317
298
DSL-8
313
355
336
Type
DSL-D11
84
154
137
DSL-D12
122
192
175
DSL-D22
160
230
213
DSL-D23
198
268
251
DSL-D33
237
306
289
DSL-D34
275
345
327
DSL-D44
313
382
365
Accessories
OBD - opposed blade dampers
ED - equalising deflectors
Blanking Plates
End Caps
Specification
Linear diffusers shall be DSL having 38mm pitch vanes and fixed 1 or
2 way horizontal diffusion patterns. Internal vanes shall be individually
removable for installation purposes.
Finish
Epoxy Polyester Powder Coated off white/pure white.
Other powder coating finishes available on request.
Typical face view and dimensions
Legend
Type
Length
Accessories
Note
Ordering
Type
|
DSL
Length
|
6000
No Slots
|
3
Accessories
|
ENDS
57
58