Professional Documents
Culture Documents
PL-1200AV2-PIGGY
HomePlug AV2 devices are preconfigured with a common Private Network Name. Adding new HomePlug AV2 devices to an existing
network with the default Private Network Name is as easy as plugging the device into the power outlet. If you wish to have a unique
Private Network Name, simply follow the instructions below. This Easy Start Guide, the User Manual, and the HomePlug AV Utility
software is included in the Resource CD.
A Package Contents
PL-1200AV2PIGGY
Ethernet
Cable
B Device Overview
Resource CD
Easy Start
Guide
BOTTOM VIEW
Power LED
Reset
Button
Powerline
Activity LED
Ethernet
Activity LED 1
Ethernet
Activity LED 2
Simple
Connect
Button
Ethernet
Ports 1 & 2
STEP 1 :
In Room A, plug in your HomePlug AV2 device into the power outlet
and connect it to the modem router using an Ethernet cable.
NOTE: Ensure that your modem routers internet connection is UP to
allow access to the internet.
STEP 2 :
STEP 3 :
2
MODEL
PL-1200AV2-PIGGY
Step 3
HomePlug X
HomePlug Y
(A HomePlug that
belongs to the existing
network)
Step 1
HomePlug X
HomePlug Y
(A HomePlug that
belongs to the existing
network)
Step 4
1
HomePlug X
HomePlug Y
(A HomePlug that
belongs to the existing
network)
Step 2
HomePlug X
HomePlug Y
(A HomePlug that
belongs to the existing
network)
To confirm if the connection has established, check the LEDs. The Power LEDs
and the Powerline Activity LEDs on all HomePlugs would be ON.
NOTES:
2
Press for 3 SECONDS
to perform factory
defaul reset.