Professional Documents
Culture Documents
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Which three statements about end-to-end delay are true? (Choose three.)
A. End-to-end delay is the sum of propagation delays, processing delays,
serialization delays, and queuing delays.
B. Coast-to-coast end-to-end delay over an optical link is about 20 ms.
C. Processing delay depends on various factors, which include CPU speed, CPU
utilization, IP switching mode, and router architecture.
D. Propagation and serialization delays are related to the media.
E. Propagation delay is the time it takes to transmit a packet and is measured in
bits-per-second (bps).
F. Serialization delay is the time it takes for a router to take the packet from an
input interface and put it into the output queue of the output interface.
31.
Refer to the exhibit. What is the maximum available bandwidth for the path
between the Workstation and the server?
32.
Which two statements are true about the implementation of QoS? (Choose two.)
A. Implementing DiffServ involves the configuration of RSVP.
B. Implementing IntServ allows QoS to be performed by configuring only the
ingress and egress devices.
C. Implementing IntServ involves the utilization of RSVP.
D. Traffic should be classified and marked by the core network devices.
E. Traffic should be classified and marked as close to the edge of the network as
possible.
33.
Which three statements are true about the application of QoS models? (Choose
three.)
A. The DiffServ model requires applications to signal the network with QoS
requirements.
B. The DiffServ model can be used to deliver QoS based upon IP precedence, or
source and destination addresses.
C. The DiffServ model requires RSVP.
D. The best effort model is suitable for applications such as file transfer and email
E. The IntServ model requires applications to signal the network with QoS
requirements.
F. The IntServ model attempts to deliver a level of service based on the QoS
specified by each packet
34.
If a deficit round robin queue is configured to dispatch 4000 bytes each round
and it has just dispatched 4500 bytes, what will be the maximun number of bytes
tuhe queue will try to dispatch during the next round?
a) 7500
b)3500
c) 4000
d) 2000
35.
How does weighted random early detection (WRED) prevent packet loss?
A. increases link capacity
B. increases buffer space to accommodate bursts of traffic from delay-sensitive
applications
a)
b)
c)
d)
CoS = 0, DSCP = 0
CoS = 0, DSCP = 40
CoS = 5, DSCP = 40
CoS = 5, DSCP = 0
c) 38 y 36 e) 30 y 26
40.
41.
Which three methods would help prevent critical network-traffic packet loss on
high speed serial interfaces? (Choose three.)
A. policy routing
B. increase link capacity
C. WRED
D. CBWFQ
E. PQ
F. WFQ
42.