Professional Documents
Culture Documents
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions
contained on this page to ensure safe use of your new VCR.
CAUTIONS
WARNING:
WARNING:
The POWER
button does not completely shut off mains
power from the unit, but switches operating current on and off.
shows electrical power standby and shows ON.
The rating plate and safety caution are on the rear of the
unit.
IMPORTANT:
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
CAUTION
n When you are not using the VCR for a long period of
time, it is recommended that you disconnect the power
cord from the AC outlet.
n Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or fire
hazard, remove the power cord from the AC outlet prior to
connecting or disconnecting any signal lead or aerial.
n Changes or modifications not approved by JVC could
void users authority to operate the equipment.
N-PAL NTSC
HR-J656/456EN-EN
98.8.4, 1:54 PM
CONTENTS
EN
NITIAL SETTINGS
14
16
IMER RECORDING
DITING
PECIAL FEATURES
ROUBLESHOOTING
39
POWER ....................................................... 39
TAPE TRANSPORT ........................................ 39
PLAYBACK .................................................. 39
RECORDING ................................................ 39
TIMER RECORDING ...................................... 40
OTHER PROBLEMS ....................................... 40
41
PLAYBACK .................................................. 41
RECORDING ................................................ 41
TIMER RECORDING ...................................... 41
NDEX
42
PECIFICATIONS
28
33
36
HR-J656/456EN-EN
98.8.4, 1:54 PM
45
4 EN
Basic Connections
ANT. IN
(Antenna or Cable input)
Antenna or Cable
Coaxial Cable
Flat Feeder
AC Outlet
Matching Transformer
(not supplied)
AC Power Cord
PAUSE/
AV
COMPU
-LINK
IN
OUT
ANT. IN
AUDIO
L
VIDEO
CH3
RF OUT
CH4
Back of VCR
RF OUT
Back of VCR
CH3
TV
VIDE
CH4
RF Cable (supplied)
75 ohm terminal
3 Insert a lithium battery with the plus (+) side facing you and
push it in.
To remove the lithium battery, press the latch A downward using a pointed non-metallic object, then pull out
the lithium battery.
4 Close the battery cover until it clicks in place.
Release tab
HR-J656/456EN-EN
98.8.4, 1:54 PM
EN
1
2
3
4
5
CHECK CONTENTS
Make sure the package contains all of the accessories
listed in SPECIFICATIONS (Z pg. 45).
SITUATE VCR
Place the VCR on a stable, horizontal surface.
CONNECT VCR TO TV
The connection method you use depends on the type of
TV you have.
RF Connection
To Connect To A TV With NO AV Input Terminals . . .
a Disconnect the TV antenna from the TV.
b Connect the TV antenna cable to the ANT. IN jack
on the rear of the VCR.
c Connect the supplied RF cable between the RF
OUT jack on the rear of the VCR and the TVs
antenna terminal. Select channel 3 or 4 on your
TV corresponding to the CH3 CH4 switch setting
on the back of the VCR.
AV Connection
To Connect To A TV With AV Input Terminals . . .
a Connect the antenna, VCR and TV as shown in
the illustration.
b Connect an Audio/Video Cable between the AUDIO
OUT and VIDEO OUT jacks on the rear of the VCR
and the AV IN jacks on the TV. Select video input
mode or A/V input mode on your TV. Refer to the
TV Instruction Manual.
For HR-J456EN:
If your TV has AUDIO IN L (MONO) and R connectors,
connect the VCR to the L (MONO) connector.
NOTES:
CONNECT VCR TO
POWER SOURCE
Connect the power plug to an AC outlet.
HR-J656/456EN-EN
98.8.4, 1:54 PM
6 EN
INITIAL SETTINGS
IMPORTANT
Before starting...
CH
5
OK
POWER
POWER
Press POWER.
CH+/
SELECT LANGUAGE
SELECCION DE IDIOMA
ENGLISH
=ESPAOL
SET TIME
Press CH 5 (+/) or
PUSH JOG %fi to set the
hour, then press OK or
PUSH JOG #.
Press and hold either
button to delay or
advance the time by 30
minutes.
OK
PUSH JOG
HR-J656/456EN-EN
CLOCK SET
TIME
:
DATE YEAR
1/ 1 98
SET DATE
SET YEAR
98.8.4, 1:55 PM
CH
5
OK
MENU
EN
3
2
RETURN TO NORMAL
SCREEN
Press MENU.
CH+/
OK
MENU
PUSH JOG
HR-J656/456EN-EN
Receivable channels in
your area are automatiSCANNING...
cally assigned to the CH
5 (+/) buttons, and
non-receivable channels
are skipped.
PRESS (MENU) TO END
If the tuner channels have
been set properly SCAN
COMPLETED will be displayed on the screen. If NO
SIGNAL is displayed on the screen, make sure that the
antenna cable is connected to the VCR properly and
press OK or PUSH JOG #. The VCR will try Auto
Channel Set again.
98.8.4, 1:55 PM
8 EN
Language
1
2
Press MENU.
CH
5
POWER
OK
MENU
POWER
OK
MENU
INITIAL SET
CLOCK SET
=LANGUAGE
Press MENU.
98.8.4, 1:55 PM
ENGLISH
RETURN TO NORMAL
SCREEN
PUSH JOG
HR-J656/456EN-EN
SELECT LANGUAGE
Move the highlight bar
(arrow) to IDIOMA by
pressing CH 5 (+/) or
PUSH JOG %fi, then
press OK or PUSH JOG #
to select the desired
language.
CH+/
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
EN
Clock
OK
CH
5
MENU
POWER
Press MENU.
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
POWER
3
2
ENGLISH
CH+/
INITIAL SET
=CLOCK SET
LANGUAGE
OK
MENU
SET TIME
Press CH 5 (+/) or
PUSH JOG %fi until the
desired time appears, then
press OK or PUSH JOG #.
Press and hold CH 5
(+/) or PUSH JOG%fi
to change the time by 30
minutes.
CLOCK SET
TIME
:
DATE YEAR
1/ 1 98
PUSH JOG
HR-J656/456EN-EN
98.8.4, 1:55 PM
10 EN
CH
5
OK
MENU
6
7
8
SET YEAR
START CLOCK
Press MENU and normal screen appears.
Summer Time (Daylight saving time) adjust is
automatically activated. (See page 11.)
SET DATE
CH+/
OK
MENU
PUSH JOG
HR-J656/456EN-EN
10
98.8.4, 1:55 PM
EN
11
MENU
Once you have set the clock, whenever your local time enters
Summer Time or goes back to regular time, you can easily make
the 1-hour time adjustment using this function.
1
2
Press MENU.
MAIN MENU
FUNCTION SET
TUNER SET
= INITIAL SET
CH+/
INITIAL SET
=CLOCK SET
LANGUAGE
ENGLISH
OK
MENU
PUSH JOG
CLOCK SET
TIME
22:45
DATE YEAR
31/7
98 WED
5
6
HR-J656/456EN-EN
11
RETURN TO NORMAL
SCREEN
Press MENU.
98.8.4, 1:55 PM
12 EN
Tuner
CH
5
OK
MENU
POWER
Press POWER.
Press MENU.
POWER
CH+/
TUNER SET
BAND
TV
=AUTO CHANNEL SET
MANUAL CHANNEL SET
SCANNING...
NOTES:
3
OK
MENU
PUSH JOG
RETURN TO NORMAL
SCREEN
Press MENU.
INFORMATION
The VCR detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
BAND on the Tuner Set screen.
HR-J656/456EN-EN
12
NOTE:
If the VCRs memory backup expires because of a power
failure, set receivable channels again.
98.8.4, 1:55 PM
EN
13
1
2
CH
5
NUMBER
ACCESS MANUAL
CHANNEL SET SCREEN
4
3
TUNER SET
BAND
TV
AUTO CHANNEL SET
=MANUAL CHANNEL SET
OK
MENU
PUSH JOG
13
CH+/
HR-J656/456EN-EN
OK
MENU
CH
(CATV)
45 ADD
RETURN TO NORMAL
SCREEN
Press MENU.
98.8.4, 1:55 PM
14 EN
Simple
Playback
PL
FF
STOP/EJECT
AY
RE
LOAD A CASSETTE
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointing towards the VCR. Dont apply too much
pressure when inserting.
2
3
4
START PLAYBACK
Press PLAY. B.E.S.T. PICTURE SYSTEM appears on the
screen (when B.E.S.T. is set to ON Z pg. 22).
STOP PLAYBACK
Press STOP or STOP/EJECT. Then press STOP/EJECT
to remove the cassette.
Usable cassettes
1
VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
3
2
PLAY
VHS-C*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
FF (Fast-Forward)
REW (Rewind)
STOP
HR-J656/456EN-EN
14
98.8.4, 1:55 PM
EN
Simple
Recording
PLAY
PAUSE
RE
STOP/EJECT
CH5
1
2
3
4
ENTER
NUMBER
LOAD A CASSETTE
Make sure the record safety tab is intact. If not, cover the
hole with adhesive tape before inserting the cassette.
TV/VCR
15
SELECT RECORDING
CHANNEL
START RECORDING
Press and hold REC and press PLAY on the remote
control, or press REC on the VCRs front panel.
B.E.S.T. takes place at the beginning of both the first
SP and the first LP (or EP) recording after inserting the
cassette (when B.E.S.T. is set to ON, Z pg. 22).
PAUSE/RESUME
RECORDING
Press PAUSE. Press PLAY to resume recording.
During record pause, you can change the recording
channel by using the CH 5 (+/) buttons or
NUMBER keys.
B.E.S.T. will not take place if the tape speed is
changed while in record pause mode.
CH+/
SP/LP (EP)
1
PLAY
PAUSE
REC
STOP
STOP RECORDING
Press STOP or STOP/EJECT. Then press STOP/EJECT to
remove the cassette.
HR-J656/456EN-EN
15
98.8.4, 1:55 PM
16 EN
PAUSE
CH
5
PLAY
Playback
Features
ACTIVATE SLOW-MOTION
PLAYBACK
For hands-free slow-motion, press and release PUSH
JOG during playback to decrease speed in the
forward direction. Continue to press and release PUSH
JOG to select the reverse slow motion, reverse
play and reverse search modes.
OR
CH+/
PL
AY
OR
PUSH JOG
Variable-Speed Search/
Reverse Motion Playback
ACTIVATE VARIABLE-SPEED
SEARCH
During playback, repeatedly press and release PUSH
JOG or to select the search speed.
To increase the speed in the forward direction, press
and release repeatedly to select the various
forward search modes.
To decrease the speed in the forward direction, press
and release .
To play in reverse slow motion, and in reverse play
mode, continue to press repeatedly after
selecting all the forward slow motion modes.
HR-J656/456EN-EN
16
98.8.4, 1:55 PM
EN
17
PL
FF
High-Speed Search
AY
ACTIVATE HIGH-SPEED
SEARCH
During playback or still, press FF for forward highspeed search, or REW for reverse high-speed search.
RE
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback
resumes.
Skip Search
1
1
4
NOTE:
To return to normal playback during a Skip Search,
press PLAY.
SKIP SEARCH
AY
PL
1
FF
REW
Index Search
Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
PUSH JOG
1
2
START SEARCH
While the tape is stopped, press PUSH JOG or
.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
HR-J656/456EN-EN
17
98.8.4, 1:55 PM
18 EN
At the press of a button, you can power up your VCR, rewind the
tape and begin viewing the most recent timer-recorded program.
RE
W
CH
5
REVIEW
Manual Tracking
Once playback begins, the VCRs automatic tracking function is
engaged. If tracking noise appears in the picture, you can
override this and make the adjustment manually.
CH+/
FF
REW
2
3
ENGAGE MANUAL
TRACKING MODE
ADJUST MANUAL
TRACKING
RE-ENGAGE AUTOMATIC
TRACKING
NOTES:
HR-J656/456EN-EN
18
98.8.4, 1:55 PM
EN
19
FF
PL
POWER
Repeat Playback
AY
ST
P/
EJ
PAUSE
EC
REW
POWER
AY
PL
TIMER
1
2
STOP REPEAT
NOTE:
Pressing PLAY, REW, FF, PAUSE or PUSH JOG or
also stops Repeat Playback.
Counter Reset
NOTE:
By pressing the DISPLAY button, you can change the
display to show the counter reading, channel number
or clock time. (Channel number is not displayed during
playback.)
PL
AY
C.RESET
IS
START REPEAT
Press and hold PLAY (until blinks on the front
display panel) during playback, then release.
FF
REW
PAUSE
+
COUNT
E
0:33:27
ST
PUSH JOG
NOTES:
Next-Function Memory
The Next Function Memory tells the VCR what to do after
rewinding. Before continuing, ensure that the VCR is in stop
mode.
a For Automatic Start Of Playback After Tape Rewind . . .
. . . press REW, then press PLAY within 2 seconds.
b For Automatic Power Off After Tape Rewind . . .
. . . press REW, then press POWER within 2 seconds.
c For Automatic Timer Standby After Tape Rewind . . .
. . . press REW, then press TIMER within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer functions if the
cassettes record safety tab is removed.
HR-J656/456EN-EN
19
98.8.4, 1:55 PM
20 EN
CH
5
OK
MENU
OSD
Press MENU.
3
4
CH+/
HR-J656EN
OFF
ON
OFF
ON
AUTO
FUNCTION
AUTO TIMER
OFF
=SUPERIMPOSE
ON
AUTO SP= LP TIMER
OFF
2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
B.E.S.T.
ON
VIDEO SYSTEM
AUTO
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
MENU
OK
PUSH JOG
To recall an indication
1 Press OSD.
RETURN TO NORMAL
SCREEN
Press MENU.
NOTES:
The superimposed indication on the TV screen tells you what the VCR is doing.
Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5
CH 125
RECORD
THU 12:00
PAUSE
seconds.
STEREO
] SP
Clock time
SAP
Stereo program indication
+
+
+
B
E
(HR-J656EN only)
INDEX-1
Second Audio Program indication
NTSC
(HR-J656EN only)
HIFI
COUNT
1:23:45
Tape position indicator
Video System indicator
Audio mode indications (HR-J656EN only)
Counter reading
HR-J656/456EN-EN
20
Operation mode
When the operation mode is changed,
the new mode is displayed RECORD
(5 sec.), PLAY (5 sec.), FF/REW (5 sec.
when engaged from Stop mode),
RECORD PAUSE (for as long as Pause is
engaged), and ITR *:** (5 sec.).
Tape speed indication
Cassette Loaded mark
When a cassette is loaded, the mark is
displayed for 5 seconds. It blinks when the
VCRs EJECT button is pushed.
INDEX indication
98.8.4, 1:55 PM
CH
5
3
2
CH+/
Press MENU.
MENU
21
OK
MENU
EN
OK
PUSH JOG
RETURN TO NORMAL
SCREEN
Press MENU.
NOTES:
HR-J656/456EN-EN
21
98.8.4, 1:55 PM
22 EN
B.E.S.T.
Picture System
CH
5
OK
MENU
POWER
Preparation
Press POWER.
Press MENU.
POWER
3
2
HR-J656EN
OFF
ON
OFF
ON
AUTO
CH+/
FUNCTION
AUTO TIMER
OFF
SUPERIMPOSE
ON
AUTO SP= LP TIMER
OFF
2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
=B.E.S.T.
ON
VIDEO SYSTEM
AUTO
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
NOTE:
When recording or when playing back tapes recorded
on this VCR, set the B.E.S.T. to ON.
3
OK
MENU
PUSH JOG
HR-J656/456EN-EN
22
RETURN TO NORMAL
SCREEN
Press MENU.
98.8.4, 1:55 PM
PLAY
EN
23
Playback
The VCR assesses the quality of the tape once you start
playback.
Perform steps 1 and 2 on page 14 (Simple Playback) before
continuing.
START PLAYBACK
Press PLAY.
The VCR adjusts the
playback picture quality
based on the quality of
the tape in use.
NOTES:
0
PLAY
HR-J656/456EN-EN
23
98.8.4, 1:55 PM
24 EN
Recording
Perform steps 1 3 on page 15 (Simple Recording) before
continuing.
PAUSE
REC
START RECORDING
Press and hold REC and
press PLAY on the remote
control, or press REC on
the VCRs front panel.
The VCR takes about 7
seconds to assess the
quality of the tape in
use, then recording
begins with the picture
level optimized.
DURING B.E.S.T.
START
END
+
+
+
B.E.S.T. PICTURE SYSTEM
NOTES:
B.E.S.T. COMPLETE
B.E.S.T. occurs immediately prior to both the
first SP and the first LP
(or EP) recording after
inserting the cassette. It
START
END
does not take place
+
+
+
during recording.
B.E.S.T. PICTURE SYSTEM
In the case of timer
recording, B.E.S.T. takes
place for both SP and LP (or EP) before the first timer
recording after inserting the cassette (regardless of the
tape speed selected for that recording).
Once the cassette is ejected, the B.E.S.T. data is
canceled. The next time the cassette is used for
recording, B.E.S.T. is re-performed.
While B.E.S.T. is operative, the PAUSE button will not
function.
To display the B.E.S.T. Picture System, SUPERIMPOSE must be set to ON or the B.E.S.T. Picture
System screen will not appear (Z pg. 20).
0
PLAY
PAUSE
REC
3
ATTENTION
HR-J656/456EN-EN
24
98.8.4, 1:55 PM
EN
1
2
CH
5
3
1
OK
MENU
Video System
25
HR-J656EN
OFF
ON
OFF
ON
AUTO
FUNCTION
AUTO TIMER
OFF
SUPERIMPOSE
ON
AUTO SP=LP TIMER
OFF
2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
B.E.S.T.
ON
=VIDEO SYSTEM
AUTO
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
CH+/
OK
MENU
RETURN TO NORMAL
SCREEN
Press MENU.
MODE
AUTO mode
(color signal)
PUSH JOG
PAL-N mode
NOTES:
HR-J656/456EN-EN
25
98.8.4, 1:55 PM
26 EN
Recording
Features
OSD
TV/VCR
C.RESET
ENGAGE TV MODE
During recording...
Press TV/VCR. The VCRs VCR indicator goes out. (If
you are using the RF connection (Z pg. 4) to view
the output from your VCR, the TV broadcast being
recorded disappears.)
If you are using the AV connection ( Z pg. 4) to view
the output from your VCR, change the TVs input
mode from AV to TV.
HR-J656/456EN-EN
26
98.8.4, 1:56 PM
EN
MENU
OK
27
CH
5
Your VCRs built-in MTS decoder enables reception of Multichannel TV Sound broadcasts.
When the channel is changed...
The STEREO indication appears on the screen for about 5
seconds if the program is a stereo broadcast.
The SAP indication appears on the screen for about 5
seconds if the program is an SAP broadcast.
Both indications appear when a stereo program is
accompanied by SAP audio.
To Record Stereo Programs . . .
. . . simply follow the basic recording procedure.
To Listen To Stereo Soundtrack During Recording . . .
. . . set AUDIO MONITOR to HI-FI at the Function Set
screen (Z pg. 21).
CH+/
OK
MENU
PUSH JOG
1
2
Press MENU.
NOTES:
HR-J656/456EN-EN
27
FUNCTION
AUTO TIMER
OFF
SUPERIMPOSE
ON
AUTO SP=LP TIMER
OFF
=2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
B.E.S.T.
ON
VIDEO SYSTEM
AUTO
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
98.8.4, 1:56 PM
28 EN
TIMER RECORDING
You can directly program the VCRs timer to record up to 8
shows, as far as a year in advance. Remember, the clock must be
set before you can program the timer (Z pg. 6 or 9).
Express Timer
Programming 1
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
LOAD A CASSETTE
Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load it into the VCR.
The VCR comes on, and the counter is reset,
automatically.
ACCESS PROGRAM
SCREEN
Press PROG.. (If youre just
starting out,
PROGRAM 1 appears.)
CH
5
CH+/
DATE+/
STOP+/
HR-J656/456EN-EN
28
PROGRAM 1
START
20:00
=
DATE
/ /
STOP
:
CH
SP
4
5
6
START+/
PROG.
STOP
:
CH
SP
NUMBER "0"
PROGRAM 1
START
:
=
DATE
/ /
Press CH 5 (+/).
98.8.4, 1:56 PM
EN
BE
"
M
U
N
1
4
"8
NUMBER "9"
PROG.
TIMER
SP
/L
P
P)
(E
OK
29
8
9
RETURN TO NORMAL
SCREEN
ENGAGE TIMER MODE
Press TIMER. The VCR turns off automatically and
is displayed on the display panel.
NOTES:
ATTENTION
If there is a conflict in the timer schedule and one program
overlaps with another, only the parts shown below in gray
will be recorded.
Program 1
Program 2
12:00
11:00
CH10
CH40
Not recorded
12:00
11:00
CH10
Program 1
Program 2 CH40
Not recorded
Program 1
12:00
11:00
CH10
Program 2
Not recorded
HR-J656/456EN-EN
29
98.8.4, 1:56 PM
CH40
30 EN
DISENGAGE TIMER
CH
5
OK
MENU
POWER
ACCESS PROGRAM
CHECK SCREEN
POWER
DATE+/
STOP+/
CANCEL
9
TIMER
CH+/
START+/
K
PR
P)
(E
.C
/L
EC
SP
3
OK
PUSH JOG
5
6
HR-J656/456EN-EN
30
DATE
24/12
25/12
25/12
ACCESS PROGRAM
SCREEN
Press PROG. CHECK again to check more information.
Each time you press PROG. CHECK, the next programs
information appears.
MENU
PR START STOP CH
1
8:00
10:00
12
2 10:00
10:45
40
3 11:30
01:00 125
4
5
6
7
8
PRESS (CHECK) TO NEXT
CANCEL OR REVISE A
PROGRAM
To cancel a program, press CANCEL.
To revise a program, press the appropriate button:
START+/, STOP+/, DATE+/, CH 5 (+/), SP/LP
(EP).
RETURN TO NORMAL
SCREEN
Press PROG. CHECK as many times as necessary. If
there are still programs remaining, go to step 6.
RE-ENGAGE TIMER
Press TIMER.
98.8.4, 1:56 PM
EN
31
Auto Timer
For Example . . .
Recording a program of 210 minutes in length onto a 180minute tape
Approximately 150 minutes
Approximately 60 minutes
SP mode
LP (EP) mode
Total 210 minutes
1
2
3
FUNCTION
AUTO TIMER
OFF
SUPERIMPOSE
ON
=AUTO SP= LP TIMER
ON
B.E.S.T.
ON
VIDEO SYSTEM
AUTO
FUNCTION
AUTO TIMER
OFF
SUPERIMPOSE
ON
= AUTO SP=LP TIMER
ON
2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
B.E.S.T.
ON
VIDEO SYSTEM
AUTO
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
RETURN TO NORMAL
SCREEN
Press MENU.
NOTE:
For safety, when AUTO TIMER is set to OFF, all other VCR
functions are disabled while the Timer mode is engaged. To
disengage the timer, press TIMER.
NOTES:
31
FUNCTION
=AUTO TIMER
OFF
SUPERIMPOSE
ON
AUTO SP=LP TIMER
OFF
2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
B.E.S.T.
ON
VIDEO SYSTEM
AUTO
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
RETURN TO NORMAL
SCREEN
Press MENU.
HR-J656/456EN-EN
HR-J656EN
HR-J656EN
Press MENU.
98.8.4, 1:56 PM
32 EN
REC
Instant Timer
Recording
(ITR)
[HR-J656EN]
SP
VCR
START RECORDING
NOTES:
You can only perform ITR using the REC button on the VCRs
front panel.
After you set the ITR time, the previous display reappears.
To check the remaining time, press REC once during recording and the remaining time will be displayed for about 5
seconds. Be careful not to press REC again within these 5
seconds, or you will round the recording time up to the next
30 minute increment.
[HR-J456EN]
SP
VCR
HR-J656/456EN-EN
32
98.8.4, 1:56 PM
EDITING
EN
33
Edit To Or
From Another 1
VCR
Player
AUDIO OUT
VIDEO OUT
AUDIO IN
Another VCR
Recorder
LOAD CASSETTES
2
3
Insert the playback cassette into your VCR and the cassette
to be recorded on into the other VCR.
Audio/Video Cable
(not supplied)
VIDEO IN
For HR-J656EN...
When connecting to a monaural VCR, connect your
VCRs AUDIO OUT L connector to the AUDIO IN
connector on the monaural VCR.
For HR-J456EN...
When connecting to a Hi-Fi VCR, connect your VCRs
AUDIO OUT connector to the AUDIO IN L connector
on the Hi-Fi VCR.
Your VCR
PAUSE/
AV
COMPU
-LINK
MAKE CONNECTIONS
Connect an Audio/Video cable between your VCRs VIDEO
OUT and AUDIO OUT connectors and another VCRs
VIDEO IN and AUDIO IN connectors.
START PLAYER
NOTE:
If the player is equipped with a superimpose/OSD
disable feature then set SUPERIMPOSE to OFF
before pressing PLAY (Z pg. 20).
START RECORDER
POWER
VCR
NUMBER "1"
NUMBER "2"
STOP
HR-J656/456EN-EN
33
98.8.4, 1:56 PM
34 EN
EDITING (cont.)
Edit From A
Camcorder
Recorder
You can use a camcorder as the player and your VCR as the
recorder.
Your VCR
For HR-J656EN...
When using a monaural camcorder, connect its
AUDIO OUT connector to the AUDIO IN L connector on the monaural VCR.
For HR-J456EN...
When using a Hi-Fi camcorder, connect its AUDIO
OUT L connector to the AUDIO IN connector on
your VCR.
VIDEO IN
VIDEO OUT
Camcorder
AUDIO OUT
EDIT
Player
MAKE CONNECTIONS
Connect an Audio/Video cable (not supplied) between
the camcorders VIDEO OUT and AUDIO OUT
connectors and your VCRs VIDEO IN and AUDIO IN
connectors.
LOAD A CASSETTE
Insert the cassette to be recorded on into the recorder
and the playback cassette into the camcorder.
NUMBER "0"
CH+/
HR-J656/456EN-EN
34
98.8.4, 1:56 PM
EN
START PLAYER
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
If you are using a JVC Master Edit Control-equipped
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorders instruction
manual.)
HR-J656/456EN-EN
35
35
98.8.4, 1:56 PM
36 EN
SPECIAL FEATURES
TV
TV Multi-Brand Remote
Control
POWER
VCR
ENTER
TURN ON THE TV
TV/VCR
3
2
NUMBER
1
2
STOP
3
OPERATE TV
TV CH+
TV VOL
TV VOL+
TV CH
NOTE:
Depending on the kind of TV, there may be cases where some
or all functions cannot be operated using the remote control.
BRAND CODE
JVC
GRADIENTE
PHILIPS
CCE
SANYO
PHILICO
SHARP
TOSHIBA
MITSUBISHI
SAMSUNG
LG
RCA
PANASONIC
GRUNDIG
SONY
NEC
NOBLEX
01
02, 11, 12, 16
03
03
04
05, 09, 17
06
07
08
10
11
12
13
14
15
16
18
HR-J656/456EN-EN
36
Hold
down
Press in succession
98.8.4, 1:56 PM
STOP
Release
EN
37
ENTER
NUMBER
1
2
TV CH+
BRAND CODE
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
JASCO
JERROLD
NOVAVISION
OAK
PANASONIC
PULSER
RCA
REGAL
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
LG
TAIHAN (DEHAN)
01, 05, 17
01, 17
15, 16, 17
15, 16, 17
02
01, 17
15, 16, 17
15
01, 04, 06, 11, 12, 15
10, 18, 23
15
01, 04, 06, 11, 12, 15
02
07
13, 14
15, 16, 17
13, 14
10, 18
01, 16, 17
05, 16, 24
02
07
05, 16, 17, 24
13, 14
05, 15, 16, 17, 24
05, 16, 24
01, 04, 16
01, 17
16, 17
03, 09
03, 09
26
27
HR-J656/456EN-EN
37
STOP
TV CH
NOTES:
Hold
down
Press in succession
98.8.4, 1:56 PM
STOP
Release
38 EN
ENTER
NUMBER
STOP
3
TV CH+
TV CH
NOTES:
BRAND CODE
51
50
41
40
Hold
down
HR-J656/456EN-EN
38
Press in succession
98.8.4, 1:56 PM
STOP
Release
TROUBLESHOOTING
EN
39
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily
corrected, and this can save you the trouble of sending your VCR off for repair.
POWER
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
TAPE TRANSPORT
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
Make sure the cassettes window is
facing up, the rear label side is facing
you and the arrow on the front of the
cassette is pointing towards the VCR.
Then insert the cassette.
PLAYBACK
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
If youre using the RF OUT connection (Z pg. 4), the channel selector
on the TV is set incorrectly.
If youre using the AV connection
(Z pg. 4), the TV is set to the wrong
mode.
This is normal.
RECORDING
SYMPTOM
POSSIBLE CAUSE
CORRECTIVE ACTION
Insert a cassette.
Remove the cassette and cover the
hole with adhesive tape, or load a
cassette on which the record safety
tab is intact.
HR-J656/456EN-EN
39
98.8.4, 1:56 PM
40 EN
TROUBLESHOOTING (cont.)
TIMER RECORDING
POSSIBLE CAUSE
SYMPTOM
1. Timer recording wont work.
CORRECTIVE ACTION
Set the clock and/or timer correctly.
Press TIMER and check to make sure
that appears on the front display
panel.
Re-perform the set-up procedures.
OTHER PROBLEMS
CORRECTIVE ACTION
SYMPTOM
POSSIBLE CAUSE
Recording is in progress.
ATTENTION
This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR
does not operate correctly switch its power off and unplug the power cord from the AC supply. Wait for a while and then plug the
power back in. Eject and check the condition of the cassette. If everything appears normal resume operating the VCR as usual.
HR-J656/456EN-EN
40
98.8.4, 1:56 PM
EN
41
PLAYBACK
RECORDING
HR-J656/456EN-EN
41
Q. When playing back programs that have been timerrecorded with consecutive times (such one program
from 8:00 to 9:00 and another one from 9:00 to
10:00), the picture and sound become momentarily
distorted at the point where the first program ends
and the second program begins. Is this a
malfunction?
A. No. This is normal.
TIMER RECORDING
98.8.4, 1:56 PM
42 EN
INDEX
3 456
PLAY
POWER
REW
FF
STOP/EJECT
PAUSE
MENU
PUSH JOG
/OK
VIDEO (MONO)L AUDIO R
+8
4
0
6
15dB
NORM
8 9
1 POWER
Button (Z pg. 6)
2 Cassette Loading Slot
3 MENU Button (Z pg. 7)
4 Rewind [REW] Button (Z pg. 14)
5 PLAY Button ( Z pg. 14)
6 Fast-Forward [FF] Button (Z pg. 14)
7 VIDEO/AUDIO Input Connectors (Z pg. 34)
* The HR-J456EN has only one AUDIO input
connector.
HR-J656/456EN-EN
42
SP
CH
REC
VCR
@ #$
98.8.4, 1:56 PM
EN
43
REAR VIEW
2
PAUSE/
AV
COMPU
-LINK
IN
OUT
ANT. IN
AUDIO
L
RF OUT
VIDEO
CH3
4
1 Power Cord ( Z pg. 4)
2 PAUSE/AV COMPU-LINK Connector
5 67 8
+8
4
0
6
SP
15dB
NORM
[J456EN]
CH4
VCR
7
2
SP
VCR
6
1 Symbolic Mode Indicators
PLAY:
FF/REW VARIABLE
SEARCH:
HR-J656/456EN-EN
STILL:
SLOW:
RECORD:
RECORD PAUSE:
43
7
2 Timer Mode Indicator
3 Tape Speed Indicators (Z pg. 15)
4 Audio Level Meter
5 Cassette Loaded Mark
6 VCR Mode Indicator (Z pg. 26)
7 Channel Display [L-1 and F-1 for AUX mode]
Counter Display (Z pg. 14)
Clock Display (Z pg. 6)
98.8.4, 1:56 PM
44 EN
INDEX (cont.)
REMOTE CONTROL
1
2
3
4
VCR
CABLE/
DBS
TV
POWER
WEEKLY
C. RESET
AUX
CANCEL
START
STOP
TIMER
CH
DATE
EXPRESS PROGRAMMING
PROG.
CHECK
PROG.
SKIP SEARCH
PLAY
FF
REW
REC
MENU
STOP
TV CH +
PAUS
3 OK
PUSH JOG
O
VO
TV
6
7
8
9
0
!
@
#
$
%
DAILY(M-F)
^
&
*
(
)
q
w
e
r
t
y
u
i
o
p
Q
TV
TV CH
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
&
*
(
)
q
w
e
r
t
y
u
i
o
p
Q
W
Buttons with a small dot on the left side of the name can
also be used to operate your JVC TV after pressing the TV
button.
Installing Batteries
1 Open the battery compartment cover.
2 Insert 2 AA-size batteries (provided) in the direction
indicated under the battery cover.
How To Use
The remote control can operate most of your VCRs functions.
1 Point the remote control toward the sensor window.
2 Press the appropriate operation button.
3 The maximum operating distance of the remote control is
about 8 m.
NOTES:
HR-J656/456EN-EN
44
98.8.4, 1:56 PM
SPECIFICATIONS
GENERAL
Power requirement
Power consumption
Power on
Power off
Temperature
Operating
Storage
Operating position
Dimensions (W x H x D)
Weight
Format
Maximum recording time
SP
: 240 min. with E-240 (PAL-N)
video cassette
: 160 min. with T-160 (NTSC)
video cassette
LP
: 480 min. with E-240 (PAL-N)
video cassette
EP
: 480 min. with T-160 (NTSC)
video cassette
VIDEO/AUDIO
Signal system
Recording/
Playback system
Signal-to-noise ratio
Horizontal resolution
Frequency range
Normal audio
Hi-Fi audio (HRJ656EN only)
Input/Output
TUNER
Tuning system
Channel coverage
VHF
UHF
CATV
RF output
TIMER
Clock reference
Program capacity
Memory backup time
ACCESSORIES
Provided accessories
45
: Frequency-synthesized tuner
: Channels 213
: Channels 1469
: 113 Channels
: Channel 3 or 4 (switchable;
preset to Channel 3 when
shipped) 75 ohms,
unbalanced
: Quartz
: 1-year programmable timer/
8 programs
: Approx. 6 months
Estimated figure based on
supplied fresh battery; actual
performance may differ.
: RF cable,
Infrared remote control unit,
Lithium battery CR2025,
AA battery x 2
HR-J656/456EN-EN
EN
45
**MOISTURE CONDENSATION
Moisture in the air will condense on the VCR when you move it
from a cold place to a warm place, or under extremely humid
conditionsjust as water droplets form on the surface of a glass
filled with cold liquid. Moisture condensation on the head drum
will cause damage to the tape. In conditions where condensation
may occur, keep the VCRs power turned on for a few hours to let
the moisture dry.
98.8.4, 1:56 PM
MEMO
HR-J656/456EN-EN
46
98.8.4, 1:56 PM
MEMO
HR-J656/456EN-EN
47
98.8.4, 1:56 PM