Professional Documents
Culture Documents
ProLight PP6M-1LXP-3SC
3W Power LED Module
Technical Datasheet
Version: 1.0
Features
● High flux per LED
● Very long operating life(up to 100k hours)
● Various colors
● RoHS compliant
● No UV
Typical Applications
● Reading lights (car, bus, aircraft)
● Uplighters/Downlighters
● Decorative/Entertainment
● Bollards/Security/Garden
● Cove/Undershelf/Task
● Indoor/Outdoor Commercial and
Residential Architectural
1
Module Mechanical Dimensions
Notes:
1. Electrical interconnection pads labeled on the aluminum-core PCB with "+" and "-" to denote
positive and negative, respectively. All positive pads are interconnected, as are all negative pads,
allowing for flexibility in array interconnection.
2. Drawing not to scale.
3. All dimensions are in millimeters.
4. All dimendions without tolerances are for reference only.
5. Please do not use a force of over 3kgf impact or pressure on the lens of the LED, otherwise
it will cause a catastrophic failure.
*The appearance and specifications of the product may be modified for improvement without notice.
2
Flux Characteristics at 350mA, T J = 25°C
Radiation Part Number Lumious Flux ΦV (lm)
Color
Pattern Module Minimum Typical
3
Absolute Maximum Ratings
White/Warm White/
Parameter Green/Blue Amber/Red
Q 30.6 39.8
R 39.8 51.7
White S1 51.7 58.9
S2 58.9 67.2
T1 67.2 76.6
Q 30.6 39.8
R 39.8 51.7
Warm White S1 51.7 58.9
S2 58.9 67.2
T1 67.2 76.6
R 39.8 51.7
S1 51.7 58.9
Green
S2 58.9 67.2
T1 67.2 76.6
K 8.2 10.7
Blue L 10.7 13.9
M 13.9 18.1
P 23.5 30.6
Amber Q 30.6 39.8
R 39.8 51.7
P 23.5 30.6
Red Q 30.6 39.8
R 39.8 51.7
4
Color Bin
0.48
0.46 2700 K
2850 K
3050 K
3250 K
0.44 3500 K MM
NM
3800 K PM
QM
0.42 4100 K
RM N1 M1
P1
4500 K SM Q1 M0 Planckian
R1 N0
0.40 TM P0 (BBL)
5000 K S1 Q0 MA
R0 NA
UM TN PA
0.38 5650 K S0 QA
VM UN T0
y
RA
0.36 6300 K SA
WM VN U0 TP
7000 K Warm White
0.34 XM WN V0 UP
XN W0 VP
0.32 X0 WP
10000 K Y0 WQ White
XP
0.30
YA
0.28
0.26
0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50
x
5
Color Bins
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
6
Color Bins
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
7
Dominant Wavelength Bin Structure
Minimum Dominant Maximum Dominant
Color Bin Code
Wavelength (nm) Wavelength (nm)
A 515 520
1 520 525
Green
2 525 530
3 530 535
A 455 460
1 460 465
Blue
2 465 470
3 470 475
2 587.0 589.5
4 589.5 592.0
Amber
6 592.0 594.5
7 594.5 597.0
2 613.5 620.5
Red
4 620.5 631.0
Note: Although several bins are outlined, product availability in a particular bin varies by production run
and by product performance. Not all bins are available in all colors.
8
Color Spectrum, TJ = 25°C
1. White
1.0
Relative Spectral Power
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
2. Warm White
1.0
Relative Spectral Power
0.6
0.4
0.2
0.0
350 400 450 500 550 600 650 700 750 800 850
Wavelength(nm)
3. Blue、Green、Amber、Red
1.0
Blue Green Amber Red
Relative Spectral Power
0.8
Distribution
0.6
0.4
0.2
0.0
400 450 500 550 600 650 700
Wavelength(nm)
9
Light Output Characteristics
160
White, Warm White
140 Green
Relative Light Output (%)
Blue
120
100
80
60
40
20
0
1
-20 02 3
20 4
40 5
60 6
80 7
100 8
120
Junction Temperature, T J (℃)
160
Red
140 Amber
Relative Light Output (%)
120
100
80
60
40
20
0
1
-20 02 3
20 4
40 5
60 6
80 7
100 8
120
Junction Temperature, T J (℃)
10
Forward Current Characteristics, TJ = 25°C
400 400
White, Warm White, Red, Amber
Average Forward Current (mA)
1.20 1.2
White, Warm White, Red, Amber
1.00 Green, Blue 1
Relative Luminous Flux
0.80 0.8
0.60 0.6
0.40 0.4
0.20 0.2
0.00 0
0 100 200 300 400 0 100 200 300 400
Forward Current (mA) Forward Current (mA)
11
Ambient Temperature vs. Maximum Forward Current
400
350
Forward Current (mA)
300
250
RθJ-A = 20°C/W
200
RθJ-A = 15°C/W
150
RθJ-A = 10°C/W
100
RθJ-A = 8°C/W
50
0
0 25 50 75 100 125 150
Ambient Temperature (℃)
400
350
Forward Current (mA)
300
250
RθJ-A = 20°C/W
200
RθJ-A = 15°C/W
150
RθJ-A = 10°C/W
100
RθJ-A = 8°C/W
50
0
0 25 50 75 100 125 150
Ambient Temperature (℃)
12
Typical Representative Spatial Radiation Pattern
Lambertian Radiation Pattern
100
90
Relative Intensity (%)
80
70
60
50
40
30
20
10
0
-100 -80 -60 -40 -20 0 20 40 60 80 100
Collimator Options
Collimator Part Number Collimator Outline
PP6N-3N25
13
Qualification Reliability Testing
Stress Test Stress Conditions Stress Duration Failure Criteria
Room Temperature
25°C, IF = max DC (Note 1) 1000 hours Note 2
Operating Life (RTOL)
Wet High Temperature
85°C/60%RH, IF = max DC (Note 1) 1000 hours Note 2
Operating Life (WHTOL)
Wet High Temperature
85°C/85%RH, non-operating 1000 hours Note 2
Storage Life (WHTSL)
High Temperature
110°C, non-operating 1000 hours Note 2
Storage Life (HTSL)
Low Temperature
-40°C, non-operating 1000 hours Note 2
Storage Life (LTSL)
Non-operating -40°C to 120°C, 30 min. dwell,
200 cycles Note 2
Temperature Cycle (TMCL) <5 min. transfer
Non-operating -40°C to 120°C, 20 min. dwell,
200 cycles Note 2
Thermal Shock (TMSK) <20 sec. transfer
1500 G, 0.5 msec. pulse,
Mechanical Shock Note 3
5 shocks each 6 axis
Notes:
1. Depending on the maximum derating curve.
2. Criteria for judging failure
Criteria for Judgement
Item Test Condition
Min. Max.
Forward Voltage (VF) IF = max DC - Initial Level x 1.1
Luminous Flux or
IF = max DC Initial Level x 0.7 -
Radiometric Power (ΦV)
Reverse Current (IR) VR = 5V - 50 μA
* The test is performed after the LED is cooled down to the room temperature.
14
Precaution for Use
● Storage
Please do not open the moisture barrier bag (MBB) more than one week. This may cause the
leads of LED discoloration. We recommend storing ProLight’s LEDs in a dry box after opening
the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less
than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.
● The slug is is not electrically neutral. Therefore, we recommend to isolate the heat sink.
● The slug is to be soldered. If not, please use the heat conductive adhesive.
● Any mechanical force or any excess vibration shall not be accepted to apply during cooling
● Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,
a heat plate should be used. It should be confirmed beforehand whether the characteristics of
the LEDs will or will not be damaged by repairing.
● This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
notice.
● Please store the LEDs away from dusty areas or seal the product against dust.
regarding the form of the pick and place nozzle, except that mechanical pressure
on the silicone lens must be prevented.
● Please do not mold over the silicone lens with another resin. (epoxy, urethane, etc)
15