Professional Documents
Culture Documents
Si
OR
TL
ALLOWABLE LOADS
W3
S2-12%
A 0.5%
DFT2
B 1%
+15%
DFT1
+15%
W1
Identification Lable
S1-12%
Detail 1
W2
50
50
D 1%
C
50
DESCRIPTION
ITEM
INSTALLATION
HYDROSTATIC TEST
DIELECTRIC TEST
ELECTRIC INSULATION TEST
NDE TEST
WELDS
CERTIFICATION
TYPE
DESIGN CODE
DESIGN PRESSURE (BarG)
DESIGN TEMPERATURE (C)
RATING (ASME/ANSI #) Class
ENDS "BW"
DESIGN FACTOR
CONNECTION PIPE DN "D" (mm/in.)
CONNECTION PIPE THK "t" (mm/in.)
JOINT OVERALL LENGTH
"OL"(mm)
MATERIAL
SOUR SERVICE
CORROSION ALLOWANCE
SERVICE
PIPING CLASSE
QUANTITY
NOTES :
NOTES
1, 4
2, 3
2, 3
2
2
5
5
6
1, 2
1, 5
YES
NO
As per Customer Requirements
Gas, Hydrocarbons, Oil, Chemical Fluids, Water,Toxic, ETC
As per Customer Requirements
As per Customer Requirements
1)
2)
All pressure containing materials including steel parts, insulating materials, seal gaskets and internal coating are suitable for resistance to H2S environments.
3)
All pressure containing steel parts shall be in strict accordance with NACE MR-0175/ISO 15156 (latest edition).
4)
This information is approximate. The exact value shall be checked and specified during the PO Stage
5)
6)
Cables Lugs will be installed on Isolating Joint only if request from Cathodic Protection Requirements.