Technical specification CRYO AB
HIGH PRESSSURE ISO TANK
CONTAINER
Type 182-K2SP-05
2591
2430
The Cryo High Pressure ISO Tank Container Dimensions
182-K2SP-05 is designed for intermodal transport of Overall dimension
deeply refrigerated, liquefied non-flammable gases (Ix w xh) 6058 x 2438x2591 mm
such as oxygen, nitrogen or argon. 20x8x86 feet
The Cryo High Pressure ISO Tank Container Volume
design conforms to the requirements of ADR/RID Te eeralane about Fst “ihe
product class 2 No. 7 (a). The IMO tank type 7 Max filling ratio. a i”
fequitements are also fulfilled
The Cryo High Pressure ISO Tank Container is ofa Pressure
double-shell vacuum-perlite-insulated construction, __ Max working pressure (g) 48 Ba
The outer shell is directly supported by the end s
frames, resulting in a robust, lightweight beam Weight
concept. The frame conforms to the ISO 1946//III ICC Gross weight approved 30480 kg
standard and the CSC requirements, Tare weight 6600 kg
‘Max payload 21680 kg
The Cryo High Pressure ISO Tank Container
lockable contral cabinet is located an the lower Product realted weight
longside and is protected by a crash-frame. The Product Filing ratio” Payload Gross weight
armature system is easily operated and the cabinet (90) {kg] {kg]
includes a stainless steel drip pan. Nitrogen. 95 13.860 20.460
‘Oxygen 95 19550 26150
The Cryo High Pressure ISO Tank Container can Argon 3 23.840 30.440
further be equipped with a cryagenic pump and a
flow metering system, each including a lockable
cabinet
YETechnical specification
CRYO AB
ae
eon
Symbol Function
Symbol Function
43 illing/emptying V1 Bottom illvave
AS Emptying through pump ——¥2_—‘Topiillvalve
25 Analysisconnection (gas)_—-V3_—_—Shutolf gud
= v6 Trycock valve
85 Checkvalve Vit Yacuumtestvalve
hal les in vyer_gyee 811 Lines safety valve V13_ Pressure build-up valve
x Lares] [oles 812 Lines safety value 20° Liquid to pump
TT te = tar V1 Reluin fiom pump
titer ¥28-—_Drainvalve / lose
; Vi2_—shutolf analysis vale
M1 Liquidevel gauge V33_— Shutoff analyss valve
” M2 Tank pressure 35 Liquid from pump.
MT Pump pressure gauge va Pressure build-up valve
hh? ‘M16 Customer tank pressure from pump
‘es vad Plot valve
- 49 Shut-off oad valve
Pump 50 instrument valve / 1
VSI iastument valve / 1
wa s1 Safety valve, inner vessel V52___ Instrument valve / M1
at 52 Safety valve, outer tank
rain [5 S10 Road valve 8 ‘Shut-off liquid
Holding time Options
Holding time (854% LIN) 20 days
Pressure increase 0 - 4.5 bar at 95% filling ratio
Net evaporation rate
Less than 0.6% / 24h (oxygen)
Other data
Inner vessel material Austenitic stainless steel
Outer jackel material Mild steel
International approvals ADR/RID, IMO 7, CSC, UIC,
150 1496/11, TIR
National approvals DE (GGVS, GGVE included),
OK, GB, NO, SE
Painting Anti-corrosion treatment,
primer and top coat in
white color
SE
Ciyo AB= Box 8887 - SE-402 72 Gothenburg Sweden
Phone: +46 31,646800 Telefax: +46,37.532220
Approvals for national use in most
European countries
Hose carrier
Pump with ¥/0 starter and automatic
phase selector
Pressure and temperature sensing switch
for protection of the pump
Stainless stee! outer jacket
Flow metering system
Pressure raise regulator
+ Customer logo and color
+ Grappler arm profiles (located on upper
tank part)
wiwwccryo.se