Professional Documents
Culture Documents
5ChE - A
ELGBT
Escover, Jhealuz
San Miguel, John Andre
Tamayo, Benedict
Module 1: Introduction to Boiler Technology Team POP QUIZ
1. One equipment of a combustion system is the burner in which it manages the
fuel-air mixtures into the furnace under what conditions?
a. Velocity, temperature and pressure
b. Pressure, velocity and concentration
c. Turbulence, concentration and velocity
d. Concentration, temperature and velocity
Source: Handout 5
2. A scotch marine boiler is one of the common type of water-tube boiler in which is
diameter ranges from ______ while its length ranges from ________.
a. 3-8 ft; 4-20 ft
b. 3-8 ft; 6-40 ft
c. 4-15 ft; 4-20 ft
d. 4-15 ft; 6-40 ft
Source: Handout 4
3. For a water-tube boiler, the steam usually leave the steam drum at _____ oF but
can leave at _______oF if from superheaters
a. 700; 1100
b. 600; 1000
c. 500; 900
d. 400; 800
Source: Handout 4
d. Rothemuhle preheater
Source: Handout 4
10.The conversion of one boiler hp to BTU per hour
Answer: 1 boiler hp = 33476 Btu per hour
Source: Handout 4
11.On what pass does the gas move through the tube tank directly above the
combustion chamber on a Horizontal Return Tubular Fire tube boiler?
a. 1st tube pass
b. 2nd tube pass
c. 3rd tube pass
d. 4th tube pass
Source: Handout 4
12.Identify the type of utility boiler wherein the fuel- air mixture is burnt in
horizontal cylinders.
Answer: Cyclone fired boiler
Source: Handout 5
13.For Pulverized Fuel Boiler, the combustion temperature ranges from _______ to
_______ 0C?
Answer: 1300-1700C
Source: Handout 1
14.Give at least two factors that limit the boiler water cycles of concentration?
Answer: Suspended solids (Total hardness), Dissolved solids, Total alkalinity (M
Alkalinity), Silica
Source: Handout 2
15.These are the other requirements for a packaged boiler expect:
A. Water pipe work
B. Fuel supply
C. Electrical connections
D. Heat generator
Source: Handout 3