Professional Documents
Culture Documents
APPLICATION NOTE
Abstract
ZVS
ZCS
NPT
VCE(sat)
VCE
IC
Eoff
D
IH
Vdc
PT
Introduction
AND9056/D
current, the power lost when the IGBT is turnedon at this
time is very small.
In this section, the conduction and turn-off losses of
ON Semiconductors
optimized
IGBT,
the
NGTB25N120IHL, will be compared to those of several
competitive devices.
The test system used for this performance evaluation is a
commercially available IH cooker.
Tables 1 and 2 present a summary of the relevant test
system parameters and IGBT switching parameters,
respectively. Several representative switching cycles close
to the peak of the input line current were used to take
measurements. This procedure was repeated for each power
level. In order to ensure identical switching cycles were
measured for all devices being tested, information about the
switching frequency of the IGBT, and the frequency of the
input line voltage was used to trigger a digital storage
oscilloscope at the specified switching cycle.
IGBT1
Control
VCE
Vdc
L1
Control
IGBT2
C2
C1
V1
0.3 mF
15 W
24 W
18 W
Gate-Emitter Resistor
10 kW
220 V/60 Hz
Control
Vdc
112 mH
B
ICE
C1
VCE
Cooking Power
Level (W)
Switching
Frequency (kHz)
1000
23.6
17
1300
21.6
21
2000
19.8
24.7
Conduction losses
http://onsemi.com
2
AND9056/D
NGTB25N120F
Competitor Device 1
Competitor Device 2
14.00
2.2
12.00
10.00
Eoff[uJ/A]
VceSat @ Ic =20A
16.00
NGTB25N120F
Competitor Device1
Competitor Device2
2.4
2
1.8
8.00
6.00
4.00
1.6
2.00
1.4
0.00
20
40
60
80
100
120
140
500
Tj[C]
1500
2000
1600
NGTB25N120F
Competitor Device1
Competitor Device2
1200
1000
800
600
400
200
0
1000
1200
1400
1600
Cooking Power Level[W]
1800
2000
2500
Econd+Eoff[uJ]
1500
1000
500
NGTB25N120F(86C)
Device2 (94C)
800
Device 1(90C)
1400
Econd[W]
1000
Cooking Power[W]
http://onsemi.com
3
AND9056/D
Test Results Analysis
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLCs product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
4
AND9056/D