Professional Documents
Culture Documents
Number: 1Y0-A20
Passing Score: 610
Time Limit: 120 min
File Version: 44.2
http://www.gratisexam.com/
Exam A
QUESTION 1
Scenario: A XenApp administrator must recommend a database option for the new XenApp 6.5 data store. The
new farm will have more than 100 XenApp servers and 500 published resources, support more than 5,000
concurrent users and have two zones separated by a WAN connection.
Which two database options should be administrator recommend? (Choose two.)
A.
B.
C.
D.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
SQL Express is a free version that only supports small environments. Obviously 100 xenapp servers, 500
published applications, 5,000 concurrent users is a large environment.
QUESTION 2
Scenario: The administrator of a small XenApp server farm has configured end-to-end encryption between the
XenApp servers and user devices by setting up Access Gateway VPX. Session Reliability is enabled in the farm
with default settings.
Over which port will published applications be delivered?
A.
B.
C.
D.
80
443
1494
2598
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
I think the answer should be 443 because of the CAG vpx is set up and then all traffic is ported to 443. Also the
2598 traffic is directed to 443.
http://support.citrix.com/servlet/KbServlet/download/2389-102-654859/CitrixPorts_by_Port_1103.pdf
Next article is for CAG8 but the trafficflow is still the same.
http://support.citrix.com/article/CTX113250
QUESTION 3
In building out a new XenApp environment, an administrator places the Secure Gateway and Web Interface in
the DMZ. What must the administrator do to secure the traffic to the XML Broker?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 4
An administrator needs to install a XenApp 6.5 server to act as an additional dedicated data collector. After
installing XenApp on the new server, the next step is to configure it by enabling the __________.
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Only during setup you can set the setup type: select session-host only (doesnt act as a data collector) or
controller and session-host. Option C&D are invalid.
QUESTION 5
Scenario: A farm contains six servers with one shared data collector that has a custom load balancing policy to
limit the number of connections. An administrator needs to add more users to the farm, which will result in
adding on four more servers for a total of 10. As most users in the farm use a CAD application, the
administrator understands that resource needs will increase.
Which step should the administrator take to maintain farm integrity?
A.
B.
C.
D.
Dedicate two new servers as data collectors and set them as Most Preferred in the election.
Dedicated one new server as the dedicated data collector and the current data collector as its backup.
Dedicate three new servers as shared data collectors and assign Most Preferred in the election panel.
Dedicate a new server as a second shared data collector and assign Most Preferred in the election panel.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
The resources a data collector uses increase based on users and servers. Since more users and servers are
being added to the farm, a dedicated server should be used just as a data collector.
http://support.citrix.com/proddocs/topic/xenapp65-planning/ps-planning-data-collectors-planning-v2.html
When planning for data collectors, consider:
If you need a dedicated data collector
If you do not need a dedicated data collector, which infrastructure services can share the same server
If you need a zone in each geographic region, which means that you need data collectors for those regions
as well
To maintain consistent information between zones, data collectors relay information to all other data collectors
in a farm, creating network traffic.
In general, data collector memory consumption increases as farm size increases. However, it is not significant.
For example, the Independent Management Architecture service running on the data collector typically uses
300 MB on a 1000 server farm.
Likewise, CPU usage is not significant. A data collector hosted on a dual-processor server can support over
1000 servers in its zone. In general, CPU usage increases as the number of servers in a zone increases, the
number of zones increases, and the number of users launching applications increases.
On most networks, Citrix recommends reducing the number of data collectors and zones. For example, if you
have a farm with 100 servers in one location, Citrix recommends having one zone with a dedicated data
collector (although you can have backup data collectors).
Citrix recommends installing XenApp on the server you want to host the data collector functionality and, after
installing other member servers, configuring a server as the backup data collector.
QUESTION 6
Scenario: An administrator is creating a new XenApp farm. The farm will use hosted applications and
applications streamed using Microsoft App-V technology. Both Microsoft Windows and Apple OS X computers
are in use in the environment. Management requires an automated process to deliver all necessary clients and
plug-ins.
Which two components should the administrator use to automate the process of delivering and updating client
plug-in? (Choose two.)
A.
B.
C.
D.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
Group policy cannot be used for Apple computers, so option A is invalid
Citrix Receiver for Windows, Receiver for Mac, and Merchandising Server are components of the Citrix Delivery
Center solution. While Citrix Delivery Center provides the application delivery infrastructure to the IT
administrator, Citrix Merchandising Server and Citrix Receiver for Windows work together to streamline the
installation and management of application delivery to the user desktops. Merchandising Server provides the
administrative interface for configuring, delivering, and upgrading plug-ins for your users' computers.
QUESTION 7
Users of a medical application are complaining of poor quality images when viewing X-ray scans. The
http://www.gratisexam.com/
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp5fp-w2k8/ps-console-policies-rules-speedscreen.html
Compression Level
This setting controls the normal lossy compression level used over client connections that are limited in
bandwidth. In such cases, displaying images without compression can be slow. The Compression level setting
defines the degree of lossy compression used on images. For improved responsiveness with bandwidthintensive images, use high compression. Where preserving image data is vital; for example, when displaying Xray images where no loss of quality is acceptable, you may not want to use lossy compression.
QUESTION 8
Scenario: A user opens a session to Server A to use a word processing application at 18:00. After 45 minutes
of working with the word processing application, the user then launches an email client application, which opens
a new session on Server B. Upon review of the environment, the administrator confirms that both applications
are published with the same parameters for audio, screen size, color resolution and encryption.
Which three possible reasons could have prevented Session Sharing from occurring? (Choose three.)
A.
B.
C.
D.
E.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Workstation control (smooth roaming) are enabled by default on the XenApp Website and Services Site.
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp65-publishing/ps-stream-plugin-decide.html
Streamed to client desktops. With this method, you make available the full set of application streaming
features. You can publish applications as "streamed to client" or any other method for streaming. When you
stream applications directly to client desktops, some of the application files are cached locally and the
application runs using the resources of the user device.
Install both the CitrixReceiverEnterprise.exe and CitrixOfflinePlugin.exe on user devices.
QUESTION 11
Scenario: A company has 10 XenApp servers. The administrator has changed the recovery action of the MS
Print Spooler Test of Health Monitoring and Recovery to prohibit logons and connections to the server. Users
report printing problems when connecting to three of the XenApp servers.
Using Health Monitoring and Recovery to allow additional XenApp servers to be excluded from load balancing,
the administrator should change the __________.
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-maintain-monitor-server-perf.html
Maximum percent of offline servers (10 percent by default). Use this setting to specify the number of servers
that the Health Monitoring and Recovery feature can exclude from load balancing.
QUESTION 12
Scenario: A server farm has three policies using the Client IP address and User filters.
- Policy A (priority 1) prevents client IP address in the 208.29.80.* range from accessing network and optical
drivers. All other settings are disabled.
- Policy B (priority 2) prevents client IP address in the 208.29.85.* range from accessing network, client and
removable drives. No other settings are configured.
- Policy C (priority 3) allows all domain users to access network, client, optical and removable drives. All other
settings are disabled.
Which drives will be available to a domain user accessing the server farm from a client using the 208.29.85.152
IP address?
A.
B.
C.
D.
E.
No drives
Optical drives
Client and removable drives
Network, client and removable drives
Network, client, optical and removable drives
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Policy B restricts client and removable drives, so that only leaves optical drives
Exam B
QUESTION 1
Scenario: A server farm has three policies applied using the User filter.
- Policy A (priority 1) denies domain users access to client and removable drives. No other settings are
configured.
- Policy B (priority 2) allows domain users to access optical drives. No other settings are configured.
- Policy C (priority 3) allows domain users to access network, client and removable drives. No other settings are
configured.
Which drives will be available to a domain user in the environment?
A.
B.
C.
D.
E.
No drives
Network drives
Network and optical drives
Network, client and removable drives
Network, client, removable and optical drives
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Because Policy A denies client and removable drives, the only ones left are network and optical drives.
QUESTION 2
Scenario: Management requires that video conferencing is implemented on all of the desktops, including video,
sound and a webcam, in the three training rooms on the education floor of the corporate building. Quality is of
very high importance. The IT department decided to implement video conferencing using XenApp. Multimedia
conferencing and Windows Media Redirection have been enabled and configured for the XenApp servers. The
latest Citrix Receiver for Windows is installed on all of the desktops.
Which three steps should the administrator take to meet the needs of the scenario? (Choose three)
A.
B.
C.
D.
E.
F.
XenApp attempts to use each web cam in succession until a video conferencing session is created
successfully.
* An Office Communicator server must be present in your farm environment.
* The Office Communicator client software must be published on the server.
Related Policies: Windows Media Redirection
QUESTION 3
A Citrix XenApp administrator needs to apply a policy to all users regardless of connection type.
Which type of policy should the administrator create?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
By default, XenApp provides Unfiltered policies for Computer and User policy settings. The settings added to
this policy apply to all connections.
http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-policies-applying.html
QUESTION 4
Scenario: A Citrix administrator manages a XenApp farm and applications are delivered through one Web
interface. The administrator is required to apply a policy to all users accessing the XenApp farm through the
Web Interface.
The administrator should filter the required User policy by ________ .
A.
B.
C.
D.
User
Group
Client Name
Worker Group
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Since the policy needs to be applied to all users, it should be applied to the Domain Users Group, since by
default every user will belong to that group. You could also put every user in an OU, but for this question OU is
not once of the choices.
You can filter user policies by:
QUESTION 5
Scenario: A XenApp administrator needs to publish an application that will be streamed to traveling users so
they launch the application when they are NOT connected to the network. The administrator also needs to
provide the published application over an ICA connection. The user devices have been equipped with the
appropriate plug-ins.
Which setting should the administrator choose when publishing the application?
A.
B.
C.
D.
Streamed to client
Installed application
Accessed from a server
Streamed if possible, otherwise accessed from a server
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
The application has to be streamed to be available offline on the client. Because of the ICA Connection
requirement, it also has to be available on the server.
http://support.citrix.com/proddocs/topic/xenapp5fp-w2k3/ps-stream-apps-config-offline-access.html
QUESTION 6
Scenario: A XenApp administrator has been tasked with delivering a new application to the traveling sales
force. The sales force will require access to applications even when they do NOT have internal or network
access.
Which three steps are required to ensure that the sales force can access their applications at all times?
(Choose three.)
A.
B.
C.
D.
E.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
v4 - updated explanation, answer is the same
At any point you can edit a profile and add a targeted language as shown below:
To support other operating systems and languages, select the check boxes associated with those you want to
support. When selecting target operating systems and languages, do not select those languages for which you
are going to create separate targets.
http://support.citrix.com/proddocs/topic/xenapp-application-streaming-edocs-v6-0/ps-stream-profile-task-createprofile-yellowtail.html
QUESTION 8
Scenario: An administrator is in the process of profiling a streaming package. The application needs unique
user updates on a regular basis. How can the administrator minimize his workload when updating the streaming
package?
A. Enable user updates to allow users to download applications from the Internet and store them in the user's
root.
B. Enable user updates to allow users to send update requests notifications to the administrator building the
packages.
C. Enable user updates to allow users the ability to update the streaming package with changes they make
themselves.
D. Enable user updates to allow users to update the main streaming package with changes that other users
can benefit from.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp-application-streaming-edocs-v6-0/ps-stream-profile-securityyellowtail.html
Select the check box to permit executable files that are accessed through the profiled application to run from
the user profile root.
If you profile the application with this setting selected, the application can download vendor-supplied updates
over the Internet. Any updates are stored as part of the user root, so they are unique to that user. The next time
the user device connects to the profiled application on a server or file share, the streamed application will not
overwrite the updates, and the application runs using the updates.
Selecting this setting is recommended for streamed macromedia plug-ins, which download extensions (DLLs)
based on the content that is being processed. Also, some applications decompress DLLs during runtime that
need to run from the user root.
QUESTION 9
Scenario: A XenApp administrator is tasked with delivering a new application to the XenApp farm. During
testing, the administrator finds that the application is incompatible with existing applications installed on the
XenApp servers. He CANNOT install the application on the servers.
The administrator is in the process of publishing this application. Click the `Exhibit' button to view a screenshot
of the Publish Application window.
Which streaming option should the administrator use to publish the application so that iPhone mobile device
users can access the application?
Exhibit:
A.
B.
C.
D.
Streamed to client
Accessed from a server - Streamed to server
Accessed from a server - Installed application
Streamed it possible, otherwise accessed from a server
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
v4 - previous answer was A, new answer B
Iphones dont support streamed to client (as far as I could tell), therefore you have to stream to the device by
streaming to the xenapp server.
C&D are invalid because you CANNOT install the application on the xenapp server - has to be streamed.
QUESTION 10
Users in an environment need to be able to open Microsoft Office documents using the software installed on
the XenApp server even if the user has NOT started a Citrix session.
What must the administrator configure to meet the requirements of the scenario?
A.
B.
C.
D.
Offline streaming
File Type Association
Host (server) to client redirection
Client to host (server) redirection
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
Client to Server redirection is what Citrix call it when you redirect the local file associations to the server to open
a local file with a published app. You do not need to manauly start an app for this to work.
http://support.citrix.com/proddocs/topic/xenapp6-w2k8-admin/ps-pub-content-redirect-client-task-v2.html
QUESTION 11
Scenario: An administrator is setting up access for the User Support team. The administrator wants to give this
team access to manage user sessions so that they can disconnect and either clear or log-off user sessions for
troubleshooting purposes.
Which node would the administrator use in order to delegate these permissions in the AppCenter?
A.
B.
C.
D.
Policies
Servers
Applications
Administrators
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
To delegate this permission add a new administrator and select custom, as shown below
QUESTION 12
A XenApp administrator discovers that a XenApp server which was previously deleted from the AppCenter is
still listed in the console. Which command can the administrate run to force removal of the erroneous server
record?
A.
B.
C.
D.
dscheck
dscheck /clean
dsmaint recover
dsmaint recreatelhc
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/proddocs/topic/xenapp5fp-w2k3/ps-commands-dscheck.html
When you run dscheck with the /clean option, the utility runs tests and removes inconsistent data (typically
servers and applications) from the data store. Because removing this data can affect the farms operation, be
sure to back up the data store before using the /clean option.
QUESTION 13
An administrator wants to configure configuration logging for two XenApp farms. Which two tasks must the
administrator configure to accomplish this? (Choose two.)
A.
B.
C.
D.
Correct Answer: AD
Section: (none)
Explanation
Explanation/Reference:
You cannot share the same sql configuration database with 2 different farms.
To enable configuration loggin:
1. Open appcenter
2. Right click on the farm name, select farm properties
QUESTION 14
Scenario: A server farm consists of dual and single processor servers. The administrator wants to ensure that
the dual-processor servers receive more sessions than the single-processor servers. In addition the
administrator wants to ensure that no server receives more than 100 user sessions.
In order to meet these requirements, the administrator must assign the__________. (Choose the correct option
to complete the sentence.)
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Default Load Evaluator:
- Load Throatling = High
- Server User Load = 100 (max number of user sessions)
Advanced Load Evaluator:
- CPU Utilization, Low = 10, Full = 90
- Load Throatling = High
- Memory usage, Low = 10, Full = 90
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
- One worker group for the servers in each of the two regions means two worker groups. For example all the
west coast servers would be in a west coast worker group and the east coast servers in an east coast worker
group.
- Each region needs to prioritise its own worker group first. For example if there were two regions (east coast
and west coast), the east coast region would have priority 1 for the east coast worker group and priority 2 for
the west coast worker group. Where as the west coast region would need to have the oposite requirements (ie:
priority 1 for the west coast worker group and prioirty 2 for the east coast worker group).
Therefore since each region has different priority requirements they must have there own Load Blanacing
Policy, which means we need two load balancing polices not one.
Exam C
QUESTION 1
Scenario: An administrator has a server farm with five servers. The administrator wants to limit the number of
Microsoft Excel published application sessions that can be run in the server farm.
Which two steps could the administrator take to meet this requirement? (Choose two)
A.
B.
C.
D.
E.
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
In previous versions of XenApp you could apply a load evaluator to a server - no more! You can only apply a
load evaluator to 1) published application 2) worker group (by creating a policy). Therefore option D is
incorrect.
http://support.citrix.com/proddocs/topic/xenapp65-admin/lm-using-attach-loadval-all.html
Assigning Load Evaluators to Servers and Applications
Updated: 2011-08-04
To participate in load management, each server or published application must have a load evaluator assigned
to it. Each server or published application can have only one load evaluator attached.
To assign a load evaluator to a XenApp server, configure the Load Evaluator Name policy setting and filter the
policy by worker group. You can assign load evaluators that are available in any XenApp farm. The rules and
their settings determine how the load of a particular server or published application is managed.
For example, if you have a published application that uses a significant percentage of a servers memory and
processing capabilities, you can add the Load Evaluator Name setting to a policy, specify the Advanced load
evaluator, and filter the policy by the worker group that contains all the XenApp servers hosting the application.
XenApp then distributes the available memory and processor demand across the load-managed servers.
When you assign a load evaluator through Citrix policies, XenApp does not validate the load evaluator name
when the policy is applied to user sessions. Therefore, if the load evaluator is later renamed or deleted, the load
cannot be calculated. Instead, XenApp logs an error to the Event Log and the affected servers report a load
index of 10,000 (full load). Additionally, the Usage by Server tab in the middle pane of the AppCenter does not
indicate the load evaluator is assigned. To ensure the policy references the correct load evaluator name, modify
the Load Evaluator Name policy setting and select the correct load evaluator name from the list of available
load evaluators.
If the policy containing the Load Evaluator Name setting is deleted, and no other policy applied to the server
specifies an alternate load evaluator, XenApp uses the Default load evaluator instead.
To assign a load evaluator to a server
Create a new Computer policy or select an existing Computer policy you want to modify. Depending on the
console you use to manage Citrix policies:
From the AppCenter, select the Policies node and then select the Computer tab.
From the Group Policy Management Editor, select Computer Configuration > Policies > Citrix Policies.
From the settings list, locate the Load evaluator name policy setting and click Add.
Select a load evaluator from the drop-down list and then click OK.
Add the Worker Group filter to the policy and specify the worker group containing the servers to which you
want to assign the load evaluator.
To assign a load evaluator to a published application
From the AppCenter, select the Applications node in the left pane.
Select the published application to which you want to attach a load evaluator.
From the Actions pane, select Other Tasks > Attach application to load evaluator.
On the Assign Load Evaluator dialog box, select the load evaluator to attach.
QUESTION 2
Scenario: A server farm has five servers which are members of the FARM worker group. Multiple applications
are published on the servers for use by over 100 employees. One of the applications has only 10 licenses.
What could the administrator do to allow only 10 employees to use that specific application at any given time?
A.
B.
C.
D.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Option A is invalid because it would affect ALL published applications, the question is very specific to 1
application.
Option B would apply to ALL users because they all belong to the same worker group
Option C is correct is it only applies to the published application
QUESTION 3
Scenario: A server farm has 12 servers in the FARM worker group with more than 1,000 users and 20
published applications. Two of the published applications perform excessive CPU context switches.
What can the administrator do to ensure that the resource-intensive applications will run optimally in the server
farm?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
v4 - answer changed.
Answer should be B, previously was D. A load evaluator can look at cpu context switches, but the default and
advanced dont look at that. So you need to create a custom load evaluator with cpu context switches enabled,
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/article/CTX126125
Auto-Replication List
Run the following cmdlet to add a print driver to the auto-replication list. Type AddXAAutoReplicatedPrinterDriverDriverName <name of driver> SourceServerName XASource, where <name
of driver> is the exact name of the print driver and XASource is the source server and press Enter.
The output should be returned confirming the driver name, source server, and that we do not wish to
overwrite the driver if it exists (the default). This is the same output we receive when running the GetXAAutoReplicatedPrinterDriver cmdlet.
After waiting a moment, type Get-XAPrinterDriver ServerName XADest, where XADest is the name of a
XenApp server that did not originally contain the print driver that was just added to the replication list.
If you should choose to remove a print driver from the auto-replication list, type RemoveXAAutoReplicatedPrinterDriver DriverName <name of driver> ServerName XASource, where <name of
driver> is the exact name of the print driver and XASource is a source server.
QUESTION 5
Scenario: An administrator needs to use the session printers policy to provision network printers from a 32-bit
print server to XenApp users. Native Windows drivers are NOT available to these printers.
Which step should the administrator take prior to implementing the session printers policy in this environment?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Use the printer driver mapping and compatibility policy to map a driver to an existing driver
QUESTION 6
Scenario: A company's Senior Citrix Administrator requested that an administrator reconfigure the printing
policies in a test XenApp 6.5 farm. The Citrix Universal Printer Driver will be used exclusively and the number of
auto-created printers on the server should be kept to a minimum to conserve resources.
Which two policies should the administrator configure to meet these requirements?
(Choose two.)
A.
B.
C.
D.
E.
Correct Answer: BD
Section: (none)
Explanation
Explanation/Reference:
"exclusively" = E
"minimum to conserve resources" = D
QUESTION 7
An administrator performs an installation of XenApp without changing any of the default settings. When a user
connects with a client printer that does NOT have a suitable driver installed, but does have a suitable driver
available in the driver store, which action will happen?
A.
B.
C.
D.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
During printer auto-creation, if XenApp detects a new local printer connected to a client device, it checks the
server hosting the published application (from which the user is trying to print) for the required printer driver. By
default, XenApp automatically installs a native driver if one is not found on the server hosting the published
application.
http://support.citrix.com/proddocs/topic/xenapp65-admin/ps-printer-driver-managing.html
QUESTION 8
Scenario: For users at remote offices, network printers are defined on their workstations. A print server is
located in each remote office. The WAN link speed to the datacenter varies and the administrator would like to
ensure the best possible printing performance for these XenApp users.
Which step should the administrator take to address the group of users with minimal required effort?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Option A is invalid because the question already says the "network printers are defined on their workstations"
Option C is invalud because it says "minimal required effort"
Opton D is invalud because there's no problem with the drivers, the problem is with bandwidth.
Option B is correct.
By default, XenApp routes jobs to network printers from the application server directly to the print server (along
the network printing pathway).
Note: Print jobs sent over the network printing pathway are not compressed. When routing printing jobs across
a network with limited bandwidth, Citrix recommends routing jobs through the client device so that the ICA
protocol compresses the jobs. To do so, disable the Citrix policy setting Direct connection to print servers.
http://forums.citrix.com/thread.jspa?threadID=288722
QUESTION 9
Scenario: The IT administrator at an online education institution manages a XenApp farm that provides access
to lectures and other class materials. The students and faculty members connect to the XenApp farm published
applications from remote computers that are NOT part of the corporate Active Directory domain. Each student
and faculty stuff member is assigned a unique set of Active Directory credentials with a password expiration
policy of 15 days. The administrator needs to allow users to change their passwords from the Web Interface
site since the computers are NOT part of the domain.
In order to configure the Web Interface to allow students and faculty members to change their passwords from
the Web Interface site, the administrator could allow users to change expired passwords by contacting the
________. (Choose the correct option to complete the sentence.)
A.
B.
C.
D.
data store
server farm
domain controller directly
domain controller directly with fallback to the data store.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
This question is misleading because you can only enable this setting for the services site, NOT the web site.
As you see below select the option for "server farm".
http://support.citrix.com/proddocs/topic/web-interface-gransden/wi-configure-password-settings-promptgransden.html
QUESTION 10
An administrator would need to add multiple farms to a Web Interface configuration to ______. (Choose the
correct two options to complete the sentence.)
A.
B.
C.
D.
QUESTION 11
Scenario: An administrator has configured three Web Interface sites. The sites are configured to fail over to
another site if a site failure occurs. After a failure occurs, the failing site is NOT available for connections for
one hour. The administrator wants to lessen the amount of time that the failing site is unavailable.
What can an administrator do to lessen the amount of time the site is unavailable?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/article/CTX122029
QUESTION 12
A XenApp administrator has been tasked with providing two factor authentication to a Web Interface server.
Which three types of two-factor authentication are supported by the Citrix Web Interface server by default?
(Choose three.)
A.
B.
C.
D.
E.
Radius
Authenex
Safeword
SecureStar
RSA Secure ID
QUESTION 13
The IT Director has approved the use of Apple iPad to access the corporate customer database system when
the devices are connected to the local wireless network.
Which type of Web Interfae site must be configured to allow iPad users to access the customer database
system published on the XenApp servers?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
v4 - answer changed from B to D
The quesiton has 2 requirements:
1) You can only use an iPad with a services site, NOT a website.
2) Question says "connected to the local wireless network", therefore you need pass-through authentication so
users are only authenticated in the local network.
(UPDATED, this makes no sense what so ever as the pass through has nothing to do with wireless but refers to
passing the logged on Windows user credentials through to XenApp. Since the person is using an iPad they
would not be using Windows Active Directory credentials to pass through. So this is not really an option.) The
scenario gives no information about the wireless setup, so to assume that it is single sign is just weird. It's
purely a physical method of connecting the iPad to the LAN, since iPads do not have a rj45 ethernet port the
logical method of connection to a LAN would be wireless.
http://support.citrix.com/article/CTX121360
QUESTION 14
Scenario: Printing has been configured in a single-server farm. Recently, the help desk has received calls from
users starting that they are unable to see their printers. Upon logging into the server, the administrator notices
that some auto-created printers are present.
Which three troubleshooting steps should the administrator perform? (Choose three.)
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
A is incorrect because the problem is not load balencing, it's people have to wait for their session to start
C and D won't do anything
B is correct because pre-launch causes the citrix session to be started BEFORE users access an application.
This greatly speeds up the wait time.
Exam D
QUESTION 1
Scenario: Users complain that first thing in the morning they receive errors when trying to launch their
application and have to re-try many times. At other times of the day, there are NO issues. What could be
causing the morning issue?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
Since this only happens during the busiest time of the day there's probably restrictions on max concurrent
logons
QUESTION 2
Scenario: An administrator is unable to start the IMA Service on a single XenApp server. The administrator
suspects another administrator may have changed the contents of the file that holds the connectivity
information for the server to the data store server.
Which file should the administrator check to verify the service connectivity information?
A.
B.
C.
D.
<install drive>:Program
<install drive>:Program
<install drive>:Program
<install drive>:Program
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/article/CTX105257
Since you can only install XenApp 6.5 on Server 2008 r2 x64 the location is C:\Program Files (x86)\Citrix
\Independent Management Architecture\MF20.dsn
QUESTION 3
Scenario: an administrator is notified that a single XenApp server has an issue with starting the IMA Service. A
quick check of all dependent services shows there are NO issues. When the administrator checks the
MF20.dsn file using Notepad, the file is unreadable and contains miscellaneous junk.
In order to quickly resolve this issue, the administrator should copy the _________. (Choose the correct option
to complete the sentence.)
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
A, This will copy over a working version of the currupted file.
B,
C, This would take to long, the question say to 'quickly resolve' this issue
D, Changing the hostname of the server is wrong, because the server name in this file refers to the server that
holds the database not the hostname of the XenApp server. If you change this setting the XenApp server would
not be able to find the datastore.
QUESTION 4
Scenario: A company has 20 machines and 20 users. The 20 users are split into two shifts so that only 10
people are connected to the XenApp 6.5 farm at any one time. Now, a third shift of 10 new users is being
added.
In order to ensure that the 10 new users can get connected to XenApp 6.5, the administrator must purchase
and install 10 additional _________. (Choose the correct option to complete the sentence.)
A.
B.
C.
D.
client machines
XenApp 6.5 concurrent licenses
Microsoft Remote Desktop Services user client access licenses
Microsoft Remote Desktop Services machine client access licenses
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
http://support.citrix.com/proddocs/topic/licensing/lic-getting-started.html
QUESTION 5
Scenario: Users are receiving the error shown in the attached exhibit when connecting to Notepad on XenApp.
The administrator runs the QUERY FARM command on the server and receives results in the second attached
exhibit.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
This first exhibit should look something like this:
A server load of 20000 means the server is full and will not accept any new connections, and you will see the
error in exhibit 2. This is a very common error. Since this is a server error caused by high load, changing the
load evaluator could lower it so the server is responsive again.
If you wanted to see the application load you would run qfarm /app, as shown below. This would show you if its
just a problem with notepad or a problem with the server
http://support.citrix.com/article/CTX131584
http://www.gratisexam.com/
Exam E
QUESTION 1
Scenario: An administrator is hired to implement a new XenApp server farm in an existing network. Because of
the existing network security practices, the administrator has to separate the Citrix license server from the
XenApp server farm with a firewall.
Which two port should the administrator ask the network security team to configure on the firewall to allow the
XenApp servers to contact the Citrix license server? (Choose two.)
A.
B.
C.
D.
E.
2512
2513
7279
8082
27000
Correct Answer: CE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
Which two methods can an administrator use to manually install a third-party printer driver while ensuring that
only the core required driver components are present in the XenApp enviornment? (Choose two)
A.
B.
C.
D.
E.
The AppCenter
Print Server Properties
The XenApp Server Role Manager
The vendo-supplied setup.exe file
The Microsoft Print Management Console
Correct Answer: BE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 3
Scenario: A XenApp administratror has been tasked with building XenApp server as generically as possible.
Other than the operating system, required updates, patches and anti-virus software, the servers are to be kept
as identical as possible to allow for quick disaster recover should the need arise. Bandwidth is restricted and
the client machines run operating systems other than Windows. Therefore, streaming applications to the client
machines in NOT possible.
Which setting must the administrator select when publishing the application?
A.
B.
C.
D.
Streamed to client
Accessed from a server, streamed to server
Accessed from a server, installed application
Streamed if possible, otherwise accessed from a server
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 4
Scenario: A Citrix XenApp administrator needs to apply a policy to all servers. The administrator needs to
ensure that all servers always receive the required policy.
Which type of policy should the administrator create?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 5
Scenario: An administrator manages a XenApp 6.5 fam with one zone. All servers in the zone have identical
hardware and software. The zone is configured with a primary data collector with a preference of Most
Preferred and a backup data collector with a prefenrece of Preferred. All other XenApp servers in the zone
have a preference of Not Preferred.
If both the primary and backup zone data collectors are turned off, the XenApp server in the zone that will be
elected the new primary zone data collector is the one ____________.
(Choose the correct option to complete the sentence).
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 6
Scenario: An administrator manages a server farm containing nine servers. The servers are organized into
three worker wroups based on the geographic location of users accessing the applications. User in all
geographic locations are accessing the applications in the server farm 24 hours a day, seven days a week.
The administrator would like to restart the servers on a regular basis.
Which two tasks should the administrator perform to automate the restarting tof the servers without impacting
user access? (Choose two).
A. Create zones for the servers in each worker group.
B. Configure reboot policies and apply them to the appropriate worker groups.
C. Create three worker groups containing a server from each existing worker group.
D. Configure the Health Monitoring policy and apply it to the appropriate worker groups.
E. Configure the Citrix IMA Service test to restart the servers and apply it to appropriate worker groups.
Correct Answer: BC
Section: (none)
Explanation
Explanation/Reference:
QUESTION 7
Scenario: A server farm has three policies applied with the User filter.
Policy A (priority 1) allows domain users to access network, client and removable drives. No other settings
are configured.
Policy A (priority 2) allows domain users to access optical drives. No other settings are configured.
Policy A (priority 3) denies domain users access to client and removable drives. No other settings are
configured.
Which drives will be available to domain users in the enviornment?
A.
B.
C.
D.
E.
No drives
Optical drives
Network and optical drives
Network, client and removable drives
Network, client, removable and optical drives.
Correct Answer: E
Section: (none)
Explanation
Explanation/Reference:
QUESTION 8
For change management reasons, a XenApp administrator has been tasked with reviewing log configuration
changes made to the XenApp farm.
Click the 'Exhibit' button to view a screenshot of the AppCentre.
Where would the administrator access this data?
Exhibit:
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 9
Scenario: The User Support Desk will be taking on frontline troubleshooting of the Citrix farms in response to
user issues. The administrator wants the Support Desk staff to do basic user troubleshooting without having
production server farm permissions. All users are added to an appropriate Active Directory group.
Which step must the administrator take in the AppCenter to meet the requirements of the scenario?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 10
A legacy application installed on the servers in a worker group has a memory leak.
How can the administrator minimize the impact of the memory leak?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 11
Scenario: A Citrix administrator manages a XenApp farm with hundreds of task workers. Management desires
that user profiles be kept to a minimum size and stored in a centralized location. User changes must NOT be
retained at logoff.
Based on there requirement, which type of profile should the administrator implement?
A.
B.
C.
D.
Local
Roaming
Mandatory
Citrix Profile Management
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 12
Users have requested that their Citrix connections automatically reconnect when they log in to the Citrix Web
Interface after they have been disconnected while travelling between sites.
Which Web Interface feature could the XenApp administrator configure to accomplish this task?
A. Persistent URLs
B. Session Reliability
C. Workspace Control
D. Session preferences
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 13
A XenApp administrator does NOT have access to the AppCenter console at the moment and needs to be able
to confirm which server in the farm is currently the zone data collector.
Which command line utility would provide the information the administrator needs?
A.
B.
C.
D.
qfarm
qfarm /load
dsmaint verifylhc
dsmaint compare
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 14
Scenario: An administrator needs to deliver an application to 1,500 user devices in the local network. The
application will be delivered from a XenApp server farm consisting of 50 XenApp servers. When choosing how
to deliver the application, the administrator must keep in mind that the user devices have little hard drive space
and limited memory resources, the user devices will always be connected to the network and the application is
updated often.
Which setting should the administrator choose when publishing the application?
A.
B.
C.
D.
Streamed to client
Streamed to server
Installed application
Streamed if possible, otherwise accessed from a server
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
Exam F
QUESTION 1
Scenario: A company has recently purchased 100 XenApp licenses to deploy a new XenApp farm that will
provide the Microsoft Office Suite for remote users. The administrator configures Health Monitoring and
Recovery options to ensure that alerts are submitted when the IMA Service is NOT working as expected.
The test queries the service to ensure that the IMA Service is working by ___________. (Choose the correct
option to complete the sentence.)
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
Scenario: A server farm has three policies applied using the Client IP address and User filters.
- Policy A (priority 1) prevents client IP addresses in the 208.29.80.* range from accessing client, optical and
removable drives. No other settings are configured.
- Policy B (priority 2) allows client IP addresses in the 208.29.80.* range to access network drives. All other
settins are disabled.
- Policy C (priority 3) allows all domain users to access client, optical and removable drives. No other settings
are configured.
Which drives will be available to a domain user accessing the server farm from a client using the 208.29.50.152
IP address?
A.
B.
C.
D.
E.
No drives
Network drivers
Client, optical and removable drives
Network, client and removable drives
Network, client, optical and removable drives
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 3
Which policy must the administrator configure to enable the XPS data type with the universal printing system?
A.
B.
C.
D.
Universal printing
Universal driver preference
Universal printing optimization defaults
Universal printing EMF processing mode
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 4
Scenario: Ad aministrator recently configured Session Reliablility on a XenApp server which delivers one
published application to 20 users on the local network. After configuration Session Reliablity, the administrator
ran Microsoft TCPView to monitor a service that Session Reliability uses. The administrator notice that users
are connecting to the published application on port 443 but NOT on the default Session Reliability port. The
administrator verified that Session Reliabilility is configured and working.
Which two reasons explain why the users are connecting to the published application on port 443? (Choose
two.)
A.
B.
C.
D.
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 5
Scenario: Three Web Interface sites are configured on different server in a farm. The administrator wants to
ensure that users are always able to access their applications through the Citrix Receiver.
How can the administrator configure the Web Interface sites to meet this requirement?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 6
Scenario: Users are receiving the error shown in the attached exhibit when connecting to Notepad on XenApp.
The administrator runs the QUERY FARM command on the server and receives the result shown in the second
attached exhibit.
Which three events could the server load value of 10,000 indicate? (Choose three.)
Exhibit:
A.
B.
C.
D.
E.
F.
A.
B.
C.
D.
Correct Answer: D
Section: (none)
Explanation
Explanation/Reference:
QUESTION 10
Scenario: Employees at company can access Microsoft Outlook 2010 and Adobe Reader offline. These
employees complain that they CANNOT view PDF files when they receive emails containing attached PDF files.
Which action can the administrator take to solve this problem?
A. Publish the two applications with the same setting from the AppCenter.
B. Precache the two packages on the users' computers instead of streaming them at lauch time.
C. Create a new streaming profile to publish that links the Office 2010 streaming package with the Adobe
Reader streaming package.
D. When profiling, choose 'Advanced Install - Select files and folders' and copy the application executables
from the two applications into each application profile.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
QUESTION 11
Scenario: A server farm consists of servers with 8 GB and 16 GB of RAM. The administrator wants to ensure
that the servers with 16 GB of RAM receive more sessions then the 8 GB servers.
In order to distribute the session load equitably among both types of servers, the administrator could assign the
____________. (Choose the correct option to complete the sentence.)
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 12
Scenario: An administrator configured multiple session printer policies for a group of users. Upon logging into
one of the XenApp 6.5 servers, the administrator is NOT able to see any of these network session printers but
does see other printers on the server.
Why is the administrator unable to see any of the users' network session printers?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 13
Scenario: A XenApp administrator must recommend a database option for a new XenApp 6.5 data store. The
new farm will have multiple zones over WAN connections with low bandwidth and high latency.
Which two database options should the administrator recommend? (Choose two.)
A.
B.
C.
D.
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
QUESTION 14
Scenario: A company recently upgraded all their Citrix licenses from XenApp Enterprise to XenApp Platinum.
The Citrix License Server has been correctly updated and configured with the correct Citrix license files. Now
users are NOT able to connect.
Which step should the administrator take to allow users to connect again?
A.
B.
C.
D.
Correct Answer: C
Section: (none)
Explanation
Explanation/Reference:
Exam G
QUESTION 1
Scenario: An administrator has published Mircosoft Word on two identical servers in a server farm. There are
75 users in the envirornment, and each server must be allowed to accept all 75 users session for failover
purposes. All users start work at 09:00 in the morning. The administrator wants to prevent server failure due to
excessive connection attempts during this logon time.
Which option will meet the needs of this scenario?
A.
B.
C.
D.
Correct Answer: B
Section: (none)
Explanation
Explanation/Reference:
QUESTION 2
Scenario: Users are complaining of poor audio quality from their XenApp applications.They are using version
11 of the online plug-in. XenApp audio policy has been configured using the installation defaults.
What can the administrator do to improve audio quality?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 3
Scenario: An administrator wishes to temporarily move users to servers in the disaster recovery site so
maintenance can be performed on the production servers. A load balacing policy is used to the production site.
Which change to the load balancing policy should the administrator make to achieve this?
A.
B.
C.
D.
Correct Answer: A
Section: (none)
Explanation
Explanation/Reference:
QUESTION 4
An administrator needs to ensure that new XenApp servers are automatically added to worker groups.
When creating a worker group, which two options could the administrator select to meet the requirements of
the scenario? (Choose two.)
A.
B.
C.
D.
E.
Application Folder
Load Security Group
XenApp Farm Server Group
Active Directory Server Group
Active Directory Organizational Unit
Correct Answer: DE
Section: (none)
Explanation
Explanation/Reference:
QUESTION 5
Laptop users need to user a XenApp published application when they are disconnected from the corporate
network.
Which two plugins should an administrator install and where should they be installed to meet the laptop user
requirements? (Choose two.)
A.
B.
C.
D.
E.
F.
Correct Answer: AB
Section: (none)
Explanation
Explanation/Reference:
http://www.gratisexam.com/