Professional Documents
Culture Documents
Page 1 of 33
NOTE: The measurements within this text and 2D documentation are given both in
millimeters and inches (in brackets). This website is based on ISO measurement unit system, which
is the international standard. I apologize to the people who use other measurement units; but I
believe that measurements given in millimeters and inches should be adequate for everyone who
would like to build this project.
Besides that, on todays Internet it is easy to purchase the ruler containing all the
measurement units and overcome the difficulties of any kind.
Use various tools and clamps in process of welding, so you could weld the items together with
accuracy.
Subassembly List
Page 2 of 33
Page 3 of 33
Page 4 of 33
Frame Components
Page 5 of 33
Page 6 of 33
Page 7 of 33
Page 8 of 33
Page 9 of 33
Page 10 of 33
Standard Parts
Page 11 of 33
Page 12 of 33
Page 13 of 33
Page 14 of 33
Page 15 of 33
Page 16 of 33
Page 17 of 33
Page 18 of 33
Page 19 of 33
Page 20 of 33
Page 21 of 33
Page 22 of 33
Assemblage Instruction
1. Flat Bench Subassembly
1. Weld the Cover 50x50mm (items 11) to the Square Tubing 50x50x4 Cut Lenght 400mm (item 7).
Page 23 of 33
2. Weld the Cover 50x50mm (items 11) to the Square Tubing 50x50x4 Cut Lenght 200mm (item 8).
Page 24 of 33
3. Weld the Square Tubing 50x50x4 Cut Lenght 1100mm (item 5) to the subassembly from the previous
picture.
Weld the Dumbbell Holder (item 10) on the other end of Square Tubing 50x50x4 Cut Lenght 1100mm
(item 5).
Page 25 of 33
4. Weld the Square Tubing 50x50x4 Cut Lenght 950mm (items 4) between two subassemblies made in
the previous step.
Page 26 of 33
5. Weld the Square Tubing 50x50x4 Cut Lenght 390,36mm (item 3) to the assembly made in step 1.
6. Weld the Square Tubing 50x50x4 Cut Lenght 190,42mm (item 2) to the assembly from the previous
picture. Chamfer the items edges on places where the items are joining together by welding.
Page 27 of 33
7. Weld the Square Tubing 50x50x4 Cut Lenght 1285,36mm (item 1) to the assembly from the
previous picture. Chamfer the items edges on places where the items are joining together by welding.
8. Weld the subassembly made in step 4 to the subassembly made in the previous step.
Page 28 of 33
9. Weld the Square Tubing 50x50x4 Cut Lenght 1370,00mm (item 6) to the subassembly from the
previous picture.
10. Weld the Sheet Support (item 12) and Triangle Support (item 13) together.
Page 29 of 33
Page 30 of 33
12. Fasten the Sheet (item 9) to the subassembly made in the previous step using standard parts: Slotted
Pan Head Screw M6x35mm (item 14), Spring Lock Washe A-6 (item 15) and Hexagon Nut M6 (item
16).
Page 31 of 33
2. Line up the dumbbells at the both ends of subassembly made in the previous step.
Page 32 of 33
Page 33 of 33