Professional Documents
Culture Documents
HR-200/300/400/500 Series
Features
The newly designed frame provides maximum clearance for positioning the workpiece.
A flat table is all that is needed for mounting these testing machines.
Simple to operate
The Dial Model HR-210 features an automatic preset
function on the indicator to set the initial (Minor) test
force to zero.
Economy type tester loaded with the features of a more expensive tester such as an Automatic Brake and Start
system that stops the application of the initial (Minor) test force and starts the total (Major) test force cycle.
Adjustable Dwell time.
Dial Selection of total test force. MS model also feature easy dial change between Rockwell and Superficial Scales.
Specications
Inch (mm)
Order Number
Model
Test Scales
Standard
Preliminary Test Force
Test Force Rockwell
963-220-10A
HR-210MR
Rockwell
963-231-10A
963-240-10A
963-241-10A
HR-320MS
HR-430MR
HR-430MS
Rockwell and Rockwell Supercial
Rockwell
Rockwell and Rockwell Supercial
JIS B 7726 ISO 6508-2 ASTM E18-10
98.07N (10kgf)
98.07N (10kgf), 29.42 (3kgf)
98.07N (10kgf), 29.42 (3kgf)
98.07N (10kgf), 29.42 (3kgf)
588.4N (60kgf), 980.7N (100kgf), 1471N (150kgf)
147.1N (15kgf), 294.2N (30kgf),
147.1N (15kgf), 294.2N (30kgf),
441.3N (45kgf)
441.3N (45kgf)
Dial
Matrix Backlight LCD
0.5 HR
0.1 HR
RS-232C, SPC
120V AC (10%), 60Hz
20.15(512mm) x 9.25(235mm) x
20.6(523mm) x 9.25(235mm) x
20.6(523mm) x 9.25(235mm) x
20.6(523mm) x 9.25(235mm) x
30.7(780mm)
30.7(780mm)
30.7(780mm)
30.7(780mm)
100.53lb (45.6kg)
102.07lb (46.3kg)
108.69lb (49.3kg)
110.01lb (49.9kg)
STANDARD ACCESSORIES
All Models
Item
V Anvil (large)
Flat Anvil
1/16" Carbide Ball Indenter
AC Adapter
Users Manual
Vinyl Cover
Accessory Box
Level
MR Models
Description
30mm
64mm
MS Models
Item
Description
Item
Description
Diamond Indenter
Hardness test Block
Hardness test Block
Hardness test Block
Rockwell
Diamond Indenter
Hardness test Block
Hardness test Block
Hardness test Block
Hardness test Block
Hardness test Block
60 HRC
30 HRC
90 HRBW
Indenter
Preliminary
test force
Conical diamond
Sphere
1.5875mm
(1/16")
Sphere
3.175mm
(1/8")
Sphere
6.35mm
(1/4")
Sphere
12.7mm
(1/2")
98.07N
(10kgf)
Hardness range
applicable
20-95HRA
40-77HRD
10-70HRC
60-100HRF
20-100HRB
30-94HRG
80-100HRH
70-100HRE
40-100HRK
Rockwell hardness
A
D
C
F
B
G
H
E
K
L
M
P
R
S
V
Hardness
symbol*1
HRA
HRD
HRC
HRF
HRB
HRG
HRH
HRE
HRK
HRL
HRM
HRP
HRR
HRS
HRV
15N
30N
45N
15T
30T
45T
15W
30W
45W
15X
30X
45X
15Y
30Y
45Y
HR15N
HR30N
HR45N
HR15T
HR30T*2
HR45T
HR15W
HR30W
HR45W
HR15X
HR30X
HR45X
HR15Y
HR30Y
HR45Y
Indenter
Preliminary
test force
Conical diamond
Sphere
1.5875mm
(1/16")
Sphere
3.175mm
(1/8")
Sphere
6.35mm
(1/4")
Sphere
12.7mm
(1/2")
29.42N
(3kgf)
Coverage
*1: In the case of scales which specify a spherical indenter, a letter should be appended to the hardness symbol (S for steel, W for tungsten carbide) when quoting the measurement result to show that it was obtained with an
indenter made of the indicated material.
*2: Applied to a specimen of less than 0.6mm thickness a special test, which takes account of the inuence of the impression made by the test sphere on such a thin specimen, may be designated as HR30Tm and is dened in JIS Z
2245 appendix A.
Features
Multiple test force generation for Rockwell, Rockwell Superficial and optional Brinell hardness.
Projected-nose indenter arm for easy reach of interior (min. 1.6"(40mm)/.86"(22mm)*) and exterior surfaces.
*When using an optional diamond indenter (19BAA292).
Closed Loop electronic test force control for accurate loading.
Auto-stop elevation table and automatic preliminary test force loading provide consistent test force generation.
HR-523
810-204-03A
HR-521
810-202-03A
Specifications
Order Number
Model
Test Scales
Standard
Preliminary Test Force
Test Force Rockwell
Test Force Superficial
Inch (mm)
810-202-03A
HR-521
810-205-03A
810-204-03A
HR-521L
HR-523
Rockwell and Rockwell Superficial
JIS B 7726 ISO 6508-2 ASTM E18-10
98.07N (10kgf), 29.42 (3kgf)
588.4N (60kgf), 980.7N (100kgf), 1471N (150kgf)
147.1N (15kgf), 294.2N (30kgf), 441.3N (45kgf)
810-207-03A
HR-523L
Touch Screen LCD Showing: Hardness value, Converted hardness value, Test conditions, OK/NG tolerance judgement, statistical processing result.
Cylindrical/spherical surface compensation, data offset, Hardness conversion (HV, HK, HRA/B/C/D/F/G/15T/30T/45T/15N/30N/45N, HS, HB,HBW, tensile strength),
OK/NG tolerance judgement, measured data editing, data memory (max 1024 data), SPC calculation (No. of data, max/min/mean values, range, upper/lower limit values,
standard deviation, No. of passing/defective) Histogram, x-R chart.
Hardness Minimum Value
Scale Conversions
Preliminary Test Force
Total Test Force Load Control
Loading Method
Load Duration (Dwell)
Maximum Specimen Height
Maximum Depth
Data Output
Power Supply
Dimensions (D x W x H)
Mass
0.1 HR
Advanced with corrections
Manual (with automatic brake-start)
8.1" (205mm)
810-027-7
810-038-7
VARI-REST
810-037-7
810-029
Special V anvil
810-040-7
V anvil (large)
1.6"(40mm), groove width 1.18"(30mm)
For large specimens
810-043
Spot anvil
Order No.
Order No.
.47"(12mm)
For sheet specimens
64BAA241
64BAA242
810-041-7
C Scale Set
B Scale Set
V anvil (small)
Test Blocks
Test Blocks
64BAA125
64BAA126
810-044-7
64BAA124
64BAA132
Spot anvil
Small V anvil
64BAA158
64BAA135
.22"(5.5mm)
For sheet specimens
.39"(10mm)
For cylindrical specimens
Indenter
Indenter
64BAA072
64BAA078
Order No.
Order No.
64BAA243
64BAA244
30N Scale
Set
30T Scale
Set
Test Blocks
Test Blocks
64BAA128
64BAA129
64BAA165
64BAA140
264-504-5A
64BAA167
64BAA130
Indenter
Indenter
64BAA073
64BAA078
810-030-7
810-042-7
810-028-7
810-048
Jack rest
For testing long specimens
using table or anvil
16
00)
8 (3
11.
Console table
0)
(40
27.
6 (7
00)
21.8 (554)
Calibration Set
810-026
06ADV380E
Test Blocks*
Order No.
Hardness
64BAA159
64BAA160
64BAA161
64BAA162
64BAA163
64BAA249
64BAA126
64BAA131
64BAA132
64BAA133
64BAA134
64BAA135
64BAA127
64BAA136
64BAA137
64BAA138
64BAA125
64BAA157
64BAA124
64BAA123
64BAA158
Order No.
64BAA129
64BAA139
64BAA140
64BAA141
64BAA142
64BAA130
64BAA143
64BAA144
64BAA145
64BAA146
Hardness
HR30T74/79 Rockwell Test Block
HR30T70/73 Rockwell Test Block
HR30T63/67 Rockwell Test Block
HR30T56/60 Rockwell Test Block
HR30T49/53 Rockwell Test Block
HR30T43/47 Rockwell Test Block
HR30T36/39 Rockwell Test Block
HR30T29/33 Rockwell Test Block
HR30T22/26 Rockwell Test Block
HR30T15/18 Rockwell Test Block
64BAA147
64BAA148
64BAA149
64BAA150
64BAA151
64BAA152
64BAA153
64BAA154
64BAA155
64BAA156
Hardness
HR45N65/70 Rockwell Test Block
HR45N55/60 Rockwell Test Block
HR45N45/50 Rockwell Test Block
HR45N35/40 Rockwell Test Block
HR45N25/30 Rockwell Test Block
64BAA128
64BAA164
64BAA165
64BAA166
64BAA167
64BAA168
64BAA169
64BAA170
64BAA171
64BAA172
1/4"
7/16"
15/32"
3/8"
Order No.
64BAA118
64BAA119
64BAA120
64BAA121
64BAA122
Description
HRE 50/55 Rockwell Test Block
HRE 60/65 Rockwell Test Block
HRE 70/75 Rockwell Test Block
HRE 80/85 Rockwell Test Block
HRE 90/95 Rockwell Test Block
Description
1/16 Carbide ball indenter
1/8 Carbide ball indenter
1/4 Carbide ball indenter
1/2 Carbide ball indenter
1/16 Carbide ball (1pc.)
1/8 Carbide ball (1pc.)
1/4 Carbide ball (1pc.)
1/2 Carbide ball (1pc.)
Order No.
Scale
64BAA072
64BAA073
64BAA086
64BAA071
C &
N
Distributed by:
1-888-MITUTOYO (1-888-648-8869)
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data
contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore
reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions
and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading
Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive.
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may require
prior approval by an appropriate governing authority.
Trademarks and Registrations
Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo
America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate companies
should be contacted for more complete trademark and registration information.
Aurora, Illinois
(Corporate Headquarters)
Westford, Massachusetts
Huntersville, North Carolina
Mason, Ohio
Plymouth, Michigan
City of Industry, California