Professional Documents
Culture Documents
1.
(MSDS)
I.
3.
I & II only
II and III only
I and III only
I, II and III
Technical Datasheet
Material safety datasheet
Application instructions
specification
4.
Cure time
profile
tip size
recoat interval
I only
II and III only
I and IV only
I, II and IV only
5.
I only
II only
I and II only
II and III only
Page1of5
Application datasheet
Material Safety Datasheet
Product Datasheet
Performance datasheet
08/04
6.
7.
Lapping
Pinole
Wrinkling
Blistering
8.
9.
If
a
coating
which
cures
by
chemically
induced
polymerization, apply without the converter having been
added first then coating will be
A) Dry but not cured
B)
C)
D)
10.
11.
Chalking
Page2of5
08/04
12.
13.
I only
II only
I and III only
II and III only
14.
15.
The
types
of
coating
polymerization is
that
cures
by
heat
induced
A)
B) Phenolic
C)
D)
16.
17.
18.
Page3of5
08/04
19.
D) 55% - 75%
Coating which cure by oxidation are
A)
B)
C)
D)
20.
21.
oxidation
evaporation
reaction with moisture in the air
coalescence
23.
alkyd coatings
epoxy emulsion coatings
epoxy amine coatings
all epoxy coatings
22.
resistant to running
resistant to sagging
generally limited to WFT of 5 mils
applied as thick as possible to form a skin at the
surface.
24.
A pigment is
A) Discrete particulate solids
B)
C)
D)
25.
Page4of5
cure by oxidation
may be applied over an alkaline surface
are considered to be high performance coatings
cure by reaction with moisture in the air.
08/04
KEY
1-B, 2-B, 3-D, 4-C, 5-B, 6-A, 7-B, 8-D, 9-A, 10-B, 11-A, 12-C, 13-B,
14-A, 15-B, 16-B, 17-B, 18-C, 19-C, 20-C, 21-A, 22-C, 23-B, 24-A,
25-A.
Page5of5
08/04