You are on page 1of 2

d e r s

a s C ylin
C O2
G

Luxfer CO2 cylinders provide unsurpassed


service to users around the globe
L uxfer Gas Cylinders, the world’s largest manufacturer of
aluminum high pressure cylinders, offers the broadest
range of high-quality, high-performance CO2 gas cylinders. With
 Lightweight–up to 40 percent lighter than some steel
cylinders.

an unmatched record for safety and performance, Luxfer CO2  No spinning marks.
cylinders provide unsurpassed service to users around the globe.  Specially designed to valve-protector carrying handle doubles
as a heat indicator.
CO2 product line benefits
 Corrosion-resistant interior and exterior–ideal for wet gasses.
 Proprietary L6X alloy, an aluminum-magnesium-silicon
blend.  Consistent weight.
 Cylinders cycle-tested in excess of 100,000 cycles at service  Specially designed base for increased stability.
pressure.
 Thick, consistent walls resist damage.
 Minimum burst pressure tested to 2.5 times service pressure
without failure.  Brushed external surface provides a low-maintenance finish.
 Cylinders made to US DOT and Transport Canada standards.  Cylinder performs well a low temperatures.
l i n d e r s
Gas C y
CO 2
C02 Gas cylinders
made from Luxfer’s proprietary L6X  alloy
®

Luxfer Part Service CO2 Outside Overall Empty Internal Water


Number Pressure Capacity Diameter Length Weight Volume Weight
psi bar cu ft liters in mm in mm lbs kgs cu in liters lbs kgs
C1.2 1800 124 1.3 0.6 3.2 81.4 9.5 241.1 1.6 0.7 51.0 0.8 1.8 0.8

C1.5 1800 124 1.6 0.7 3.2 81.4 11.5 292.1 1.8 0.8 65.0 1.1 2.3 1.1

C218 1800 124 2.0 0.9 4.4 111.1 9.0 228.6 3.1 1.4 82.0 1.3 3.0 1.3

C25H 1800 124 2.5 1.1 4.4 111.1 10.4 263.5 4.4 2.0 102.0 1.7 3.7 1.7

C005 1800 124 5.0 2.3 5.3 133.4 14.2 361.6 7.5 3.4 205.0 3.4 7.4 3.4

C010 1800 124 10.0 4.5 6.9 175.0 16.6 422.3 14.1 6.4 408.0 6.7 14.7 6.7

C015 1800 124 15.0 6.8 6.9 175.0 23.2 589.0 17.0 7.7 612.0 10.0 22.1 10.0

C020 1800 124 20.0 9.1 8.0 203.2 23.3 591.6 24.8 11.2 816.0 13.4 29.4 13.4

C050 1800 124 50.0 22.7 8.6 218.4 46.3 1176.7 48.8 22.1 2040.0 33.4 73.6 33.4

Which cylinder would you choose to


carbonate your beverage?

We cut open the steel cylinder on the left to


show you its interior. As you can clearly see, steel
cylinders are susceptible to rust and corrosion.
The comparable cylinder on the right
manufactured by Luxfer is made of aluminum.
Notice that there’s no corrosion. In fact,
aluminum cylinders seldom show signs of
corrosion, even after many years of service.

Luxfer Gas Cylinders • 3016 Kansas Avenue • Riverside, California 92507 USA
Tel: 800-764-0366 or 951-684-5110; Fax: 951-781-6598
www.luxfercylinders.com

You might also like