Professional Documents
Culture Documents
Stylus usage
1) : 4A 4A400 LED
xD$%D/D/
Batter y: The stylus using a 4A batter y, a 4A batter y can work 400
hours; the LED light is u s e d t o s h o w t h e ba t te r y l e ve l , w h e n t h e b l u e
display, the battery is sufficient, when displayed in red, the need for timely
replace the batter y
2) }: }}}LED)D
23 *
X/Y/Z 3D
\]
Power on: Stylus could be powered on through the side button click or the
nibs pressure, LED lights display starts, Hand-painted with different software,
to achieve real stroke thickness, concentration, X / Y / Z 3D pressuresensitive performance reached world leading level;
3) :
Shortcuts key: Stylus pen body has a shortcuts key, can be used as right
mouse button
4) : ,W W
!!"#$%&"'()*,
-U$():.G\]
Nibs replacement: Nibs is wearing parts, long-term use there will be wear
and need replacing; In replacement, use the metal ring clamped gently
and pull out the old nibs, pinch the new nibs with fingers and stuffed inside
needs to maintain the same level)
5
Touble shooting
Trouble
No picture
#-./01236
display unusual or nonsynchronous color screen
2U#-WX"Y
Screen is not in the
middle of a screen
}1\
Screen appears to
shake or wave
No function stylus
*2
Accuracy is not enough
!"#FGHIJ
The resolution supported
Shooting
Check the power and signal cable is connected
!"#$%&$
Check the panel power is switch on
'()*+,*
Adjust the brightness and contrast
89:;<=?@
Check the VGA/HDMI video cable is properly connected to
the computer, fastening;
;DEFG!"#HIJ
Check whether the computer graphics card supports the
digital panel resolution
OSD "\]'(":"^_'("`qx'(="Y1z
{|}'(
using "level adjustment" and "vertical adjustment" option to
adjust the screen
|}'(
Perform a automatically adjust
|}'(,
If automatic adjustment is invalid, Check whether there are
magnetic effects around
#-/
$%$1
Please check the bottom blue pen icon is displayed, if there
is, the stylus switch may not open , or are the batter y is dead,
please replace the batter y
#-/}z{
USB Cable1$
If the blue pen icon does not appear that the driver is not
running, please re-plug USB Cable, or restart computer
6/}1
W
If af ter these steps, the blue pen icon still does not appear,
please re-install the driver, or temporarily remove the other
computer handwriting software
012345%6Bosto!"!"#789
:;<www.pen-touch.com
(If you want to learn more about Bosto digital
hand-painted screen, please visit our website:
www.pen-touch.com)
USB Cable1$
please re-plug USB Cable, or restart computer
WIN 7U"/ TABLET PC#-=
XP"/ Y/ ="
WIN 7 operating system, choose and perform the calibration
function in the directory of "Control Panel / TABLET PC/ calibration "
Windows XP operating system, click the blue pen icon in the
bottom right of screen, choose and perform a screen calibration
procedure which in the director y of / settings / calibration
640 x 480 @ 60Hz / 800 x 600 @ 60Hz /
1024 x 768 @ 60Hz / 1280 x 1024 @ 60Hz /
1360 x 768 @ 60Hz / 1366 x 768 @ 60Hz
BOSTO
1 $B
2 <
Incoming I nspection
3 }
1 . 1 @A#BCD
`@AVGAHDMIUSBa<DUSB
89VGAHDMI<b12V , 2A
1 . 2 EFG%H,@A
This product is equipped with a VGA cable, HDMI line, power cord
and USB cable, when used, first connect the USB, video cable(VGA,
HDMI) and power cord, connect the power to 12V ,2 A
,-cdHDMIe<D1fg
!"#Digital Panel
]^_Packing bag
Stylus
IJCleaning cloth
Nibs
}Driver CD
Batter y
DC Cable
.NEWarranty Card
.OPFilm
,-01TUV1 WG:XYZ[
Note : Any lack or damage , Please contact local dealer ASAP
DVI
VGA
USB
POWER
HDMI
KLMQuick guide
Driver Installation
3 . 1
stylus driver installation
1) . .m=}no!"#
Ensure the equipment wiring is correct, start the computer
2) . hipCrst3uv},wxy;
Before installing the driver, make sure to completely uninstall similar
other handwritten driver, this is ver y important;
3) . CD)z{" SETUP"z{|;`}~
};
Insert the CD into the drive, execute "SETUP" installation file, according
to the computer's operating system install the appropriate driver;
4) . }C={U#-/
w};
When the driver installation is complete, the small blue pen icon appears
in the lower right corner of the screen
, which means hand-written
driver installed successfully;
3 . 2
Shortcuts key driver installation
1) . z{" SETUP"z{|;`}~}
Execute SETUP file, select the appropriate drive according to the
computer's operating system
2). 1-47-10 566
The No.1-4 and No.7-10 buttons are shortcuts; No.5-6 buttons are
switch for switching wheel function
3) . YxSET UP)|g)
+xSAVE.
Setting new shortcuts program: Click SET UP, enter a custom name,
through keyboard input button corresponding shortcut program, and
then click SAVE to save;
4) .
`}
*
Change the shortcut key program: When replacing the shortcut key
procedures,Only need to choose the corresponding shor tcut key
program in the drop-down menu, and then click EXIT to exit;
5) . 4AUD<=3D
Bi+0
KUYh
`RIGHTREVERSE`q~619MA@A
Interface explain: A) the information at the bottom of the shortcut
key inter face is show whether connected properly, and also show
whether the program is successfully updated; B) the operating interface
default value is for right-hand painting customer, if customer use left
hand drawing (that means use right hand to operate the shortcuts key),
customer need to click the "RIGHT" icon before setting the shortcuts
program; the "REVERSE" icon applies only to 19MA model;
,-Uhi;jk}
2FGMAC
Note: Before installing the driver, make sure what operating
system the computer is using , The stylus driver is not support
MAC operating system
1 $B
2 <
Incoming I nspection
3 }
1 . 1 @A#BCD
`@AVGAHDMIUSBa<DUSB
89VGAHDMI<b12V , 2A
1 . 2 EFG%H,@A
This product is equipped with a VGA cable, HDMI line, power cord
and USB cable, when used, first connect the USB, video cable(VGA,
HDMI) and power cord, connect the power to 12V ,2 A
,-cdHDMIe<D1fg
!"#Digital Panel
]^_Packing bag
Stylus
IJCleaning cloth
Nibs
}Driver CD
Batter y
DC Cable
.NEWarranty Card
.OPFilm
,-01TUV1 WG:XYZ[
Note : Any lack or damage , Please contact local dealer ASAP
DVI
VGA
USB
POWER
HDMI
KLMQuick guide
Driver Installation
3 . 1
stylus driver installation
1) . .m=}no!"#
Ensure the equipment wiring is correct, start the computer
2) . hipCrst3uv},wxy;
Before installing the driver, make sure to completely uninstall similar
other handwritten driver, this is ver y important;
3) . CD)z{" SETUP"z{|;`}~
};
Insert the CD into the drive, execute "SETUP" installation file, according
to the computer's operating system install the appropriate driver;
4) . }C={U#-/
w};
When the driver installation is complete, the small blue pen icon appears
in the lower right corner of the screen
, which means hand-written
driver installed successfully;
3 . 2
Shortcuts key driver installation
1) . z{" SETUP"z{|;`}~}
Execute SETUP file, select the appropriate drive according to the
computer's operating system
2). 1-47-10 566
The No.1-4 and No.7-10 buttons are shortcuts; No.5-6 buttons are
switch for switching wheel function
3) . YxSET UP)|g)
+xSAVE.
Setting new shortcuts program: Click SET UP, enter a custom name,
through keyboard input button corresponding shortcut program, and
then click SAVE to save;
4) .
`}
*
Change the shortcut key program: When replacing the shortcut key
procedures,Only need to choose the corresponding shor tcut key
program in the drop-down menu, and then click EXIT to exit;
5) . 4AUD<=3D
Bi+0
KUYh
`RIGHTREVERSE`q~619MA@A
Interface explain: A) the information at the bottom of the shortcut
key inter face is show whether connected properly, and also show
whether the program is successfully updated; B) the operating interface
default value is for right-hand painting customer, if customer use left
hand drawing (that means use right hand to operate the shortcuts key),
customer need to click the "RIGHT" icon before setting the shortcuts
program; the "REVERSE" icon applies only to 19MA model;
,-Uhi;jk}
2FGMAC
Note: Before installing the driver, make sure what operating
system the computer is using , The stylus driver is not support
MAC operating system
1 $B
2 <
Incoming I nspection
3 }
1 . 1 @A#BCD
`@AVGAHDMIUSBa<DUSB
89VGAHDMI<b12V , 2A
1 . 2 EFG%H,@A
This product is equipped with a VGA cable, HDMI line, power cord
and USB cable, when used, first connect the USB, video cable(VGA,
HDMI) and power cord, connect the power to 12V ,2 A
,-cdHDMIe<D1fg
!"#Digital Panel
]^_Packing bag
Stylus
IJCleaning cloth
Nibs
}Driver CD
Batter y
DC Cable
.NEWarranty Card
.OPFilm
,-01TUV1 WG:XYZ[
Note : Any lack or damage , Please contact local dealer ASAP
DVI
VGA
USB
POWER
HDMI
KLMQuick guide
Driver Installation
3 . 1
stylus driver installation
1) . .m=}no!"#
Ensure the equipment wiring is correct, start the computer
2) . hipCrst3uv},wxy;
Before installing the driver, make sure to completely uninstall similar
other handwritten driver, this is ver y important;
3) . CD)z{" SETUP"z{|;`}~
};
Insert the CD into the drive, execute "SETUP" installation file, according
to the computer's operating system install the appropriate driver;
4) . }C={U#-/
w};
When the driver installation is complete, the small blue pen icon appears
in the lower right corner of the screen
, which means hand-written
driver installed successfully;
3 . 2
Shortcuts key driver installation
1) . z{" SETUP"z{|;`}~}
Execute SETUP file, select the appropriate drive according to the
computer's operating system
2). 1-47-10 566
The No.1-4 and No.7-10 buttons are shortcuts; No.5-6 buttons are
switch for switching wheel function
3) . YxSET UP)|g)
+xSAVE.
Setting new shortcuts program: Click SET UP, enter a custom name,
through keyboard input button corresponding shortcut program, and
then click SAVE to save;
4) .
`}
*
Change the shortcut key program: When replacing the shortcut key
procedures,Only need to choose the corresponding shor tcut key
program in the drop-down menu, and then click EXIT to exit;
5) . 4AUD<=3D
Bi+0
KUYh
`RIGHTREVERSE`q~619MA@A
Interface explain: A) the information at the bottom of the shortcut
key inter face is show whether connected properly, and also show
whether the program is successfully updated; B) the operating interface
default value is for right-hand painting customer, if customer use left
hand drawing (that means use right hand to operate the shortcuts key),
customer need to click the "RIGHT" icon before setting the shortcuts
program; the "REVERSE" icon applies only to 19MA model;
,-Uhi;jk}
2FGMAC
Note: Before installing the driver, make sure what operating
system the computer is using , The stylus driver is not support
MAC operating system
1 $B
2 <
Incoming I nspection
3 }
1 . 1 @A#BCD
`@AVGAHDMIUSBa<DUSB
89VGAHDMI<b12V , 2A
1 . 2 EFG%H,@A
This product is equipped with a VGA cable, HDMI line, power cord
and USB cable, when used, first connect the USB, video cable(VGA,
HDMI) and power cord, connect the power to 12V ,2 A
,-cdHDMIe<D1fg
!"#Digital Panel
]^_Packing bag
Stylus
IJCleaning cloth
Nibs
}Driver CD
Batter y
DC Cable
.NEWarranty Card
.OPFilm
,-01TUV1 WG:XYZ[
Note : Any lack or damage , Please contact local dealer ASAP
DVI
VGA
USB
POWER
HDMI
KLMQuick guide
Driver Installation
3 . 1
stylus driver installation
1) . .m=}no!"#
Ensure the equipment wiring is correct, start the computer
2) . hipCrst3uv},wxy;
Before installing the driver, make sure to completely uninstall similar
other handwritten driver, this is ver y important;
3) . CD)z{" SETUP"z{|;`}~
};
Insert the CD into the drive, execute "SETUP" installation file, according
to the computer's operating system install the appropriate driver;
4) . }C={U#-/
w};
When the driver installation is complete, the small blue pen icon appears
in the lower right corner of the screen
, which means hand-written
driver installed successfully;
3 . 2
Shortcuts key driver installation
1) . z{" SETUP"z{|;`}~}
Execute SETUP file, select the appropriate drive according to the
computer's operating system
2). 1-47-10 566
The No.1-4 and No.7-10 buttons are shortcuts; No.5-6 buttons are
switch for switching wheel function
3) . YxSET UP)|g)
+xSAVE.
Setting new shortcuts program: Click SET UP, enter a custom name,
through keyboard input button corresponding shortcut program, and
then click SAVE to save;
4) .
`}
*
Change the shortcut key program: When replacing the shortcut key
procedures,Only need to choose the corresponding shor tcut key
program in the drop-down menu, and then click EXIT to exit;
5) . 4AUD<=3D
Bi+0
KUYh
`RIGHTREVERSE`q~619MA@A
Interface explain: A) the information at the bottom of the shortcut
key inter face is show whether connected properly, and also show
whether the program is successfully updated; B) the operating interface
default value is for right-hand painting customer, if customer use left
hand drawing (that means use right hand to operate the shortcuts key),
customer need to click the "RIGHT" icon before setting the shortcuts
program; the "REVERSE" icon applies only to 19MA model;
,-Uhi;jk}
2FGMAC
Note: Before installing the driver, make sure what operating
system the computer is using , The stylus driver is not support
MAC operating system
4
Stylus usage
1) : 4A 4A400 LED
xD$%D/D/
Batter y: The stylus using a 4A batter y, a 4A batter y can work 400
hours; the LED light is u s e d t o s h o w t h e ba t te r y l e ve l , w h e n t h e b l u e
display, the battery is sufficient, when displayed in red, the need for timely
replace the batter y
2) }: }}}LED)D
23 *
X/Y/Z 3D
\]
Power on: Stylus could be powered on through the side button click or the
nibs pressure, LED lights display starts, Hand-painted with different software,
to achieve real stroke thickness, concentration, X / Y / Z 3D pressuresensitive performance reached world leading level;
3) :
Shortcuts key: Stylus pen body has a shortcuts key, can be used as right
mouse button
4) : ,W W
!!"#$%&"'()*,
-U$():.G\]
Nibs replacement: Nibs is wearing parts, long-term use there will be wear
and need replacing; In replacement, use the metal ring clamped gently
and pull out the old nibs, pinch the new nibs with fingers and stuffed inside
needs to maintain the same level)
5
Touble shooting
Trouble
No picture
#-./01236
display unusual or nonsynchronous color screen
2U#-WX"Y
Screen is not in the
middle of a screen
}1\
Screen appears to
shake or wave
No function stylus
*2
Accuracy is not enough
!"#FGHIJ
The resolution supported
Shooting
Check the power and signal cable is connected
!"#$%&$
Check the panel power is switch on
'()*+,*
Adjust the brightness and contrast
89:;<=?@
Check the VGA/HDMI video cable is properly connected to
the computer, fastening;
;DEFG!"#HIJ
Check whether the computer graphics card supports the
digital panel resolution
OSD "\]'(":"^_'("`qx'(="Y1z
{|}'(
using "level adjustment" and "vertical adjustment" option to
adjust the screen
|}'(
Perform a automatically adjust
|}'(,
If automatic adjustment is invalid, Check whether there are
magnetic effects around
#-/
$%$1
Please check the bottom blue pen icon is displayed, if there
is, the stylus switch may not open , or are the batter y is dead,
please replace the batter y
#-/}z{
USB Cable1$
If the blue pen icon does not appear that the driver is not
running, please re-plug USB Cable, or restart computer
6/}1
W
If af ter these steps, the blue pen icon still does not appear,
please re-install the driver, or temporarily remove the other
computer handwriting software
012345%6Bosto!"!"#789
:;<www.pen-touch.com
(If you want to learn more about Bosto digital
hand-painted screen, please visit our website:
www.pen-touch.com)
USB Cable1$
please re-plug USB Cable, or restart computer
WIN 7U"/ TABLET PC#-=
XP"/ Y/ ="
WIN 7 operating system, choose and perform the calibration
function in the directory of "Control Panel / TABLET PC/ calibration "
Windows XP operating system, click the blue pen icon in the
bottom right of screen, choose and perform a screen calibration
procedure which in the director y of / settings / calibration
640 x 480 @ 60Hz / 800 x 600 @ 60Hz /
1024 x 768 @ 60Hz / 1280 x 1024 @ 60Hz /
1360 x 768 @ 60Hz / 1366 x 768 @ 60Hz
BOSTO
www.pen -touch. com
4
Stylus usage
1) : 4A 4A400 LED
xD$%D/D/
Batter y: The stylus using a 4A batter y, a 4A batter y can work 400
hours; the LED light is u s e d t o s h o w t h e ba t te r y l e ve l , w h e n t h e b l u e
display, the battery is sufficient, when displayed in red, the need for timely
replace the batter y
2) }: }}}LED)D
23 *
X/Y/Z 3D
\]
Power on: Stylus could be powered on through the side button click or the
nibs pressure, LED lights display starts, Hand-painted with different software,
to achieve real stroke thickness, concentration, X / Y / Z 3D pressuresensitive performance reached world leading level;
3) :
Shortcuts key: Stylus pen body has a shortcuts key, can be used as right
mouse button
4) : ,W W
!!"#$%&"'()*,
-U$():.G\]
Nibs replacement: Nibs is wearing parts, long-term use there will be wear
and need replacing; In replacement, use the metal ring clamped gently
and pull out the old nibs, pinch the new nibs with fingers and stuffed inside
needs to maintain the same level)
5
Touble shooting
Trouble
No picture
#-./01236
display unusual or nonsynchronous color screen
2U#-WX"Y
Screen is not in the
middle of a screen
}1\
Screen appears to
shake or wave
No function stylus
*2
Accuracy is not enough
!"#FGHIJ
The resolution supported
Shooting
Check the power and signal cable is connected
!"#$%&$
Check the panel power is switch on
'()*+,*
Adjust the brightness and contrast
89:;<=?@
Check the VGA/HDMI video cable is properly connected to
the computer, fastening;
;DEFG!"#HIJ
Check whether the computer graphics card supports the
digital panel resolution
OSD "\]'(":"^_'("`qx'(="Y1z
{|}'(
using "level adjustment" and "vertical adjustment" option to
adjust the screen
|}'(
Perform a automatically adjust
|}'(,
If automatic adjustment is invalid, Check whether there are
magnetic effects around
#-/
$%$1
Please check the bottom blue pen icon is displayed, if there
is, the stylus switch may not open , or are the batter y is dead,
please replace the batter y
#-/}z{
USB Cable1$
If the blue pen icon does not appear that the driver is not
running, please re-plug USB Cable, or restart computer
6/}1
W
If af ter these steps, the blue pen icon still does not appear,
please re-install the driver, or temporarily remove the other
computer handwriting software
012345%6Bosto!"!"#789
:;<www.pen-touch.com
(If you want to learn more about Bosto digital
hand-painted screen, please visit our website:
www.pen-touch.com)
USB Cable1$
please re-plug USB Cable, or restart computer
WIN 7U"/ TABLET PC#-=
XP"/ Y/ ="
WIN 7 operating system, choose and perform the calibration
function in the directory of "Control Panel / TABLET PC/ calibration "
Windows XP operating system, click the blue pen icon in the
bottom right of screen, choose and perform a screen calibration
procedure which in the director y of / settings / calibration
640 x 480 @ 60Hz / 800 x 600 @ 60Hz /
1024 x 768 @ 60Hz / 1280 x 1024 @ 60Hz /
1360 x 768 @ 60Hz / 1366 x 768 @ 60Hz
BOSTO
www.pen -touch. com