Professional Documents
Culture Documents
To transition your volumes from Data Ontap 7-Mode to Data Ontap Clustered Mode o
r C-Mode you can use the following steps.
In the following example the Netapp 7-mode SAN is called NETAPP_7MODE (192.168.2
.10) and the Netapp Clustered Ontap system is called NETAPP_CMODE (192.168.1.10)
.
Both are running Data Ontap 8.2
Creating a Netapp Peer Transition
NETAPP_CMODE::> vserver peer transition create -local-vserver NETAPP_CMODE -srcfilers-name NETAPP_7MODE
Transition peering created
Create a Destination Volume
NETAPP_CMODE::> volume create -volume vmware_datastore1 -aggregate aggr1 -size 1
00GB -type DP
[Job 16] Job succeeded: Successful
Create an Netapp Intercluster LIF
NETAPP_CMODE::> network interface create -vserver NETAPP_CMODE -lif intcl_lif1 role intercluster -home-node NETAPP_CMODE -home-port a0a-10 -address 192.168.1.1
0 -netmask 255.255.255.0
NETAPP_CMODE::> network routing-groups route create -vserver NETAPP_CMODE -routi
ng-group i192.168.1.0/24 -destination 0.0.0.0/0 -gateway 192.168.1.1
Network Ping Test
NETAPP_CMODE::> network ping -lif intcl_lif1 -lif-owner NETAPP_CMODE -destinatio
n 192.168.2.10
192.168.2.10 is alive
Create a Netapp Snapmirror Relationship using TDP (Transition Relationship)
NETAPP_CMODE::> snapmirror create -source-path NETAPP_7MODE:vmware_datastore1 -d
estination-path NETAPP_CMODE:vmware_datastore1 -type TDP
Operation succeeded: snapmirror create the relationship with destination NETAPP_
CMODE:vmware_datastore1
Initialize the Snapmirror
NETAPP_CMODE::> snapmirror initialize -destination-path NETAPP_CMODE:vmware_data
store1
Operation is queued: snapmirror initialize of destination NETAPP_CMODE:vmware_da
tastore1
Snapmirror Status
NETAPP_CMODE::> snapmirror show OR snapmirror show -destination-path NETAPP_CMOD
E:vmware_datastore1
Snapmirror Update
NETAPP_CMODE::> snapmirror update -destination-path NETAPP_CMODE:vmware_datastor
e1
Snapmirror Quiesce