Professional Documents
Culture Documents
EDITIA
REVIZIA
DATA
EPOTAR V 3203-2
1
1
15.07.2002
S.F. V 3203-2
pag. 1/6
Descriere
Description
Utilizare
Recommended use
Sortimente
V 3203-2 negru
Assortments
black
CARACTERISTICI TEHNICE
TECHNICAL DATA
Aspect
Semilucios
Finish
Semiglossy
SR ISO 2813+C1:1997
Volum de solide
53% approx.
Volume solids
Specific gravity
Timp de scurgere
Densitate
70 - 100s
STAS 2096 - 68
Flow time
100 s
Aderenta, grila de 1 mm
Adherence to substrate, 1 mm grid
Uscare, approx.
5 hours
24 hours
Fully cured
7days
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
EPOTAR V 3203-2
1
1
15.07.2002
S.F. V 3203-2
pag. 2/6
Valabilitate in ambalaj
Shelf life
3 months form the production date, with the observance of the storage and packing
provisions.
Depending on the storage conditions, it is recommended to stir the product before use.
DETALII DE APLICARE
APPLICATION DETAILS
Raport de amestecare
Mixing ratio
Timp de prereactie
30 min.
(at 20 C)
24 hours
(at 20 C)
Pot life
Metoda de aplicare
pensulare
pulverizare aer
pulverizare air-less
Application method
air spray
2.5 - 3 atm
200 atm
min. 2.2 mm
0.021 - 0.023
Thinner / Thinning
Presiune
Pressure
Diametru duza
Nozzle orifice
Curatare instrumente
Cleaning of tools
226 m approx.
120 m approx.
Interval de reacoperire
Re-coat interval
Consum teoretic
Theoretical spreading rate
Consum practic
Practical spreading rate
Observatie
Remark
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
EPOTAR V 3203-2
1
1
15.07.2002
S.F. V 3203-2
pag. 3/6
PREGATIREA
SUPRAFETEI
SURFACE
PREPARATION
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
EPOTAR V 3203-2
1
1
15.07.2002
S.F. V 3203-2
pag. 4/6
CONDITII DE
APLICARE
APPLICATION
CONDITIONS
Observatie
Remark
INSTRUCTIUNI DE
APLICARE
APPLICATION
INSTRUCTIONS
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
EPOTAR V 3203-2
1
1
15.07.2002
S.F. V 3203-2
pag. 5/6
INSTRUCTIUNI DE
APLICARE
APPLICATION
INSTRUCTIONS
REACOPERIRE
RE-COATING
The components should be conditioned at 10 - 30C, thoroughly homogenized and then the mixture
should be prepared as follows: 240 parts (by weight) enamel + 100 parts (by weight) curing agent.
During the pre-reaction time (30 minutes) keep on mixing by stirring. After pre-reaction time and
before application the mixture should be thinned in recommended proportions or in necessary
proportions for obtaining the required thickness of the film.
Thus prepared the V 3203-2 paint can be applied:
-over new metallic surfaces blasted at minimum Sa 2 or over epoxy primers (e.g.: G 3202-1,
G 3201series, G 3200S series), ethylsilicate primers (e.g.: G 4101;
-over metallic surfaces coated before, prepared by mechanically cleaning at St3
-over non-ferrous metallic surfaces (zinc, aluminum, etc.) properly prepared mechanically by
(blasting, brushing, polishing, etc.) and treated with reactive primers (e.g.: G 410OP);
-over concrete surfaces.
Successive coats of V 3203-2 paint can be applied as follows after complete air drying (24 hours at
20C) of the previous coat.
V 3203-2
Observatii
Remarks
L 3200
Min.
Max.
Min.
Max.
24h
48 h
24h
48 h
AMBALARE
PACKING
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
EPOTAR V 3203-2
1
1
15.07.2002
S.F. V 3203-2
pag. 6/6
SECURITATEA MUNCII
WORK SAFETY
NOTA
NOTE
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro