Professional Documents
Culture Documents
Free Resources
View Archives
CCIE Bloggers
108 Comments
Search
Search
Submit
Select Category
Introduction
CCIE Bloggers
Congratulations on purchasing INEs CCIE R&S v4.0 Training Program, the complete solution to passing the CCIE
R&S lab exam! This document provides you with the detailed guidelines to using the products comprising the
training program. This program structure has been designed under the realistic assumption that you may allocate
about 3 days a week studying for your CCIE, approximately 4 hours a day, or effectively 12 hours a week. The
suggested training duration is 48 weeks and the programs high level structure is as following:
Warm-up Phase. Weeks 01-12. Gets you started for CCIE studies. Covers core topics, develops basic hands-on
and speed skills.
Core Training. Weeks 13-24. This phase develops solid hands-on skills and cements fundamental knowledge.
Advanced Training. Weeks 25-48. Gets you to the advanced level of technology understanding and perfection
in hands-on skills.
Appendix A: Choosing Your Training Routine: Select either 3-month, 6-month or 12-month program.
Appendix B: Step by Step approach to completing a full-scale lab.
Appendix C: On Time Management.
It is important to point out that the CCIE R&S Training program develops advanced hands-on configuration skills.
You are assumed to obtain a solid theoretical knowledge foundation by studying for and passing the CCIE R&S
Written test prior to starting this program. Additionally, if you find yourself needing additional theoretical reference
during your studies, the following book is recommended:
Popular Posts
Congrats to Neil Moore - **NINE
TIME** CCIE & CCDE!
17: VOL2
18: VOL2
19: VOL2
20: VOL3
Lab 7
Lab 8
Lab 9
Labs 5+6
25: VOL1
26: VOL1
27: VOL1
28: VOL1
QoS
QoS
QoS
QoS
After this big take on QoS, you are back to full-scale lab practice. Everything is the same as it was before, but this
time you put special accent on speed and accuracy. It is time to fully utilize the Notepad configuration technique.
Instead of configuring routers via CLI, type your configuration off the top of your head in the notepad application
first, and then paste it in the router. Keeping your configurations in the notepad makes it easy to spot and
eliminate mistakes and greatly simplifies additional configuration steps that are simply added to the existing code.
You may also use the existing configuration as templates and copy and paste them to speed up configuration
process for other routers. When you get used to this method you will find it faster and much less prone to errors
compared to straightforward CLI configuration.
Week
Week
Week
Week
You should be looking toward the score of around 70 points in Mock Lab 2. A good sign of progress is getting
above 70 points. If you notice that you missed a bunch of points due to simple mistakes, rather than complete
technology misunderstandings, this is actually an excellent sign. You just need to work on your hands-on skills
more. Which is what you are going to do in the following weeks:
Week
Week
Week
Week
33: VOL2
34: VOL2
35: VOL3
36: VOL4
Lab 13
Lab 14
9+10
5+6
Week
Week
Week
Week
Mock Lab 3 may look complicated, especially the troubleshooting section. Getting a score above 60 points is a
good result here. The weeks after this, your aim is twofold. First, you use VOL1 to identify the topics you are still
missing or weak at. And you specifically practice these topics the next two weeks. After this, take another full-scale
lab and practice advanced troubleshooting scenarios.
Week 41: VOL1 Missing Topics
Week 42: VOL1 Missing Topics
Week 43: VOL2 Lab 18
Week 44: VOL4 Labs 7+8
The last week of the training routine is dedicated to finishing the remaining VOL2 and VOL4 labs. The training
program is completed by taking the last mock lab exam. The last mock lab is filled with hidden troubleshooting
issues and is relatively complicated. However, you should aim at a score of about 70 in this mock lab test.
Week
Week
Week
Week
What next? If you diligently completed every step of the program, you are ready to take the lab exam. Like we
mentioned previously, you should have one scheduled at the middle of your training program and you should be
within a week of taking the lab test now. If you have to wait more than this, spend the time repeating the VOL2
labs, starting with Lab 1, Lab 2, and so on. It is important to practice continuously, as the hands-on skills tend to
wear off quickly.
108 Responses to How to pass the CCIE R&S with INEs 4.0 Training
Program
October 9, 2010 at 6:32 am
Manish Salaria
Awesome!!
Reply
October 9, 2010 at 7:46 am
Carlos_M
Im very agreeAwesome!!!!! Great !!!
Reply
October 9, 2010 at 8:39 am
bumi akin
wow! this is such an awesome post. this timetable method will definitely help a lot us plan and get organized.
thaxnx Petr!
Reply
October 9, 2010 at 10:48 am
NET_OG
Petr,
Great suggestions. I have been creating something similar, but you have way more familiarity with the whole set of products so
thank you.
Here is one suggestion: can you create a java applet that will randomly pick topics? You can call it CCIE-Roulette!
This is to help keep things FRESH and add a little bit of randomness, you can have one CCIE Roulette topic per week! This
mechanism to introduce a topic inside of the PLAN you outlined would serve as a way to keep the Exponential half-life of memory
degradation at bay.
What do you think?
NET_OG
Reply
October 9, 2010 at 2:42 pm
MCL.Nicolas
Simply Awesome !
Reply
October 9, 2010 at 6:52 pm
Ronaldo Marins
Awesome post, Petr!
Its exactly what I was looking for. Without a well structured plan, like this one, it is almost impossible to get yourself organized and
keep commited with the study as well.
Id like to ask for your permission to share with everybody a spreadsheet based on your post. Beside your 48 weeks plan(12 hours
per week), I suggested two others: the first one, with 9 months (18 Hours per week), and the second one, with ~6 months, based on
my necessity (18 Hours per week as well, but with 48 hours per week during the last month [due to my vacation])
http://rapidshare.com/files/424139541/CCIE_Study_Plan.xlsx
Many thanks!
Reply
October 9, 2010 at 8:07 pm
Reply
October 9, 2010 at 10:02 pm
Deepak Arora
Hi Petr,
As redrawing diagrams as part of strategy is important, can you please explain how you could have redraw diagrams for INE Vol 2
Lab 1(old) & What tools and show commands you would have used for this purpose.
http://www.internetworkexpert.com/downloads/IEWB-RS-VOL-2.lab1.v5.00.pdf
One detailed example using this Lab 1 to show how to draw diagrams and which show commands could be used will be a great
help.
Reply
October 9, 2010 at 10:23 pm
Shahid Mushtaq
Great Post.
Definitely will help us to design our study plans for the big C@
Thanks.
Reply
October 10, 2010 at 5:27 pm
Mauricio
Thank you very much Petr!!
This a valuable guide for our CCIE efforts, now we can study with a defined structure and organization to get the most out of our
preparation toward the precious CCIE!!
Thanks!!
Reply
October 10, 2010 at 6:25 pm
Antonio
Hi Petr,
Thank you very much for this excelent guidance!. I just have one question, if the calculated time to complete the whole program is 48
weeks assuming 3 days of study per week , is it possible to finish the complete program (not the 6 months approach you also
mentioned), but to spend 6 days per week (24 hours per week) so we can finish the complete program in 6 months? , in other
words, can we finish the complete program in 6 months if we double the time of study as I mentioned? will this work the same way
than the 3 days per week (12 hours week approach?)
I appreciate your comments in advance
Reply
October 10, 2010 at 9:24 pm
Reply
October 10, 2010 at 9:37 pm
Reply
October 10, 2010 at 9:49 pm
Reply
Oc tober 10, 2010 at 10:01 pm
Wilson Chew
Hi Petr,
Awesome post there.
Just to check to with which method is the best method to study for ccie, rack rental or dynamips.
If we go with the rack rental method, roughly how many tokens are needed for your suggestion.
Many thanks in advance.
Cheers
Wilson
Reply
October 11, 2010 at 3:19 am
David Sudjiman
QOS There is about 80 scenarios and you have about 12 study days to cover them. You may want to allocate extra time for some
topics, but overall spending a month on QoS should be enough.
in 1 month? I did that for 3 months. Nothing sticks and exhausted. Now Im really confused how I would be able to digest all of those
80 labs. Yeah, I know that I need to keep practising to remember it but 80 labs with all of those QoS combinations?
I second your comment, trying to take it by storm may result in frustration and lost of interest after 3-4 month of overly exhaustive
studies. Balanced approach might be a better idea in many cases.
Reply
October 11, 2010 at 8:48 am
Reply
October 11, 2010 at 9:14 am
Reply
October 12, 2010 at 2:54 pm
Bill
I see at the top you state this is a preview, is there any ETA on posting the complete guide?
Reply
Oc tober 12, 2010 at 10:15 pm
Marc La Porte
Petr,
It mentions its the This is a preview of INEs CCIE Routing & Switching 4.0 Training Program Guide.
Question: When is this guide being released? And how much will it cost?
Thanks
Marc
Reply
October 13, 2010 at 7:40 am
George
Great walk through, thank you. One question though, you only list two books to read Routing TCP/IP V1-E2 and E2E QOS. Are no
other books recommended?
Reply
October 13, 2010 at 8:06 am
Sorin
Peter
As always reading your blogs is an eye opener.
I asked one year ago for directions on how to use the material but never got an answer from INE, so i did most of VOl1, went to the
amazing bootcamp with Brian and now Im almost ready for VOL2 and VOL3.
How would you use the materials that we get during the bootcamp ?
I used them as a revision and the portion that i dont know i go back to VOL 1.
The idea that i had is as long as Im not able to finish notepad style the bootcamps materials im not ready for VOl2 or VOL3
Should i forget about them and start with VOl2 ?
TIA
Reply
October 13, 2010 at 9:17 am
Reply
October 13, 2010 at 9:20 am
Reply
October 13, 2010 at 1:49 pm
Hassan B.
Hi Petr, and thanks for that great topic.
from week (9-12) you wrote that we have to go for Full-Scale Labs but in the first 8 weeks we didnt practice non-core topics so at this
phase you mean to do all Lab1+2+3(all conf+ TS ) or just do the core topics only from these labs , i hope you got what i mean
because all next phases we are going to do Full-labs without doing the minor non-core at the fundamental phase .
you gave Qos a month thats great i love it ,but shouldnt we go for mock labs after finishing all core+non-core topics together to get
the correct evaluation ?
thanks
Reply
Oc tober 14, 2010 at 12:39 am
zafar
HI Petr,
if i want to add ccie written also this, how can i modify it so that retention can be alleviated for the studies of the written exam.
or
how can we merge written with the lab study plan
ps. really digg you supermemo/memory map article, have been using both these tools lately.
cheers
zafar
Reply
Oc tober 14, 2010 at 11:26 am
Reply
Oc tober 14, 2010 at 12:05 pm
MZ
Peter, you are the real super man in IT field.
In regarding home lab vs GNS3 or Dynamips and rack tokens, at the beginning, I attempted to us GNS3 to bypass the need for
routers so I bought three 3550 SMI switches on eBay loaded with EMI images later. Then I got a 3750 from a friend of mine. After
reading about issues related to GNS3, the quad NIC cards, USB to serial adapter and PC issues. I was fed up and spend some
money to get 2600xm and 3640 moduler routers for less than $1500. Now I have a full lab with TS server and a frame relay switch!
BTW, I still have 700 tokens stuck on hand. I might use them when I get near to the finish line. The feeling to wire up my physical
home lab is so good.
Reply
October 14, 2010 at 2:03 pm
Jezz
Hi Petr,
Thanks for putting in the time and effort into producing this. I am a little confused by the Vol 1 study though: weeks 1 to 8 cover about
a quarter of Vol 1, weeks 25 to 28 cover the entire QOS section and then it looks like weeks 41 to 42 are used to complete all the rest
? (At that point it looks like over half of it is still untouched) Is that possible or are you suggesting you dont complete all of Vol 1 ?
Vol1 looks pretty good to me and I think I definitely need to complete it all in order to pass the Lab.
Maybe I am missing something here please advise.
Kind Regards
Jezz
Reply
October 14, 2010 at 2:39 pm
Reply
October 14, 2010 at 2:42 pm
Reply
October 14, 2010 at 2:47 pm
Reply
October 15, 2010 at 5:30 am
Sorin
Thanks Petr
will do
Reply
October 15, 2010 at 5:57 pm
Paul
Great article Petr. I did not see you answer Wilsons questions about the amount of tokens. Please could you comment?
Thanks
Reply
October 15, 2010 at 6:32 pm
Reply
October 15, 2010 at 9:40 pm
Wehaibi
Many thanks, great & very useful post
Reply
October 16, 2010 at 6:31 am
Hassan B.
waiting for your replay Petr
Reply
October 16, 2010 at 9:46 am
Reply
October 16, 2010 at 9:51 am
Getting the most out of CCIE R&S Workbooks VOL1 and VOL2 | CCIE Blog
[...] Note: Extended Learning Strategy that utilizes all products in INE training program could be found here How to Pass the CCIE
R&S with INEs 4.0 Training Program [...]
Reply
October 16, 2010 at 1:08 pm
Hassan B.
Thanks Pert for your replay , i will do
But can do a guide for written exam too, it will help us here as i am at this phase right now and i am sure many others are .
Thanks again ,youre the best
Reply
Oc tober 17, 2010 at 10:47 pm
David Sudjiman
Petr, I realised that you guys put Troubleshooting for WB2. How to include these on the schedule?
Reply
Oc tober 18, 2010 at 12:11 am
bumi akin
@ Ronaldo Marins: Pls can you repost your study time table on another site with no download limits? e.g. 4shared, hotfile etc
thanx!
Reply
Oc tober 18, 2010 at 12:50 pm
ziyo
can i finish ccie lab practice for 12-weeks if i spend 15-hours a day
Reply
October 24, 2010 at 6:31 am
Ronaldo Marins
@bumi akin: New link with no restrictions: http://www.marins.net.br/share/CCIE Study Plan.xlsx
Reply
November 1, 2010 at 2:07 pm
bumi akin
@ Ronaldo: thanx for the timetable! it is fantastic stuff!!
it will definitely come in handy. the 48-week plan suits me perfectly.
i encourage everyone to download the timetable
thanx again!
Reply
November 3, 2010 at 3:57 pm
Antonio
Hi Petr!
We are very excited about this guide! do you have an estimated date in which the final version of this guide with the time
management topics you mentioned will be released?
Regards
Reply
November 5, 2010 at 10:27 am
Reply
November 10, 2010 at 6:43 pm
Kenneth Chong
Hi guys,
There is something I dont quite understand:
Bridging & Switching: 1.1-1.15
Frame-Relay: 2.1-2.8
IP Routing: 3.1-3.11
RIP: 4.1-4.11
EIGRP: 5.1-5.10
OSPF: 6.1-6.14
BGP: 7.1-7.12
IPv6: 9.1-9.9
Multicast: 8.1-8.10
MPLS VPN: 14.1-14.7.
What I have understood from this is that these are the only chapters you should be doing in week 1-8. After that you go on with
Volume 2 Full scale lab?
And till in week 41 and 42 you continue with the missing parts of Volume 1?
So this means all the other stuff from Volume 1 will not be really needed in Volume 2? Maybe its a silly question or maybe dont
really see the logic in skipping 3/4 of the Volume 1 topics in week 1-8 and just go on doing full scale lab, and come back to the
missing topics of Volume 1 in week 41 and 42?
Thanks for helping!
KC
Reply
November 12, 2010 at 11:19 am
Patricio Villar
Hi Petr!! I taked the lab exam and failed in the TS section, what is your recomendation for my case? you think i need to start from
week 25? or later?
Thanks for the great post!!
All the Best
Reply
December 3, 2010 at 2:41 am
Dlardeux
@ Ronaldo Marins: Pls can you repost your study time table .
Thanks!
Reply
Dec ember 16, 2010 at 11:42 am
Martin
Great list, comes in real handy !
thx !
Reply
Dec ember 22, 2010 at 10:59 pm
Kaveh
Excellent plan! Ive done quite a bit of research and this is most likely the best laid out curriculum. I look forward to beginning my
CCIE endeavor through your resources!
Ive created my own plan based on the training plan here. Thank you.
Reply
January 5, 2011 at 3:23 am
Kelvin
This outline is a good resource and plan for success. Working in Afghanistan and remote rack connections slower due to satellite
connection and may have to extend some of the recommended timeline. But overall helpful preparation tool, thanks!
Reply
January 7, 2011 at 2:13 pm
Reply
January 19, 2011 at 9:28 pm
Reply
January 22, 2011 at 6:16 pm
Reply
January 24, 2011 at 1:57 pm
Reply
January 30, 2011 at 7:09 pm
Reply
February 1, 2011 at 3:26 am
Reply
February 21, 2011 at 11:16 pm
Reply
April 3, 2011 at 12:42 pm
Vijaya
I am planning to follow your excellent plans to get my CCIE certification by Nov 2011
Excellent layout .. !
Reply
April 12, 2011 at 1:25 pm
Reply
May 2, 2011 at 11:29 am
Reply
May 2, 2011 at 5:50 pm
Masiid
hi,
how much does it cost?
can you design a topology/.net file only design for Linux 64-bit?
I have built my machine as powerfull as a machine can get! well almost!
Please advise,
Regards,
Masood
Reply
May 4, 2011 at 4:02 pm
Reply
May 8, 2011 at 10:08 am
Reply
June 24, 2011 at 3:05 am
Jason
Thank you Petr this is an old post now but still very relevant. I am just about to start my journey and this I believe will set me up
nicely.
Reply
July 18, 2011 at 4:55 pm
timaz
very very fantastic. Id got stuck in the middle of nowhere and did not know the beginning point and procedure and this is frustrating,
you know actually. but after I read this article, besides many other suggestions about INE, I found what I need. thanks to Petr and
Brian for their effort to help others in their journey. this article is awesome and guide everyone that really wants to be CCIE. you show
you treat your clients like your own friends or even your brothers. God blesses you. I wish I could be there and be in touch with you
and your great team.
Reply
July 31, 2011 at 9:28 am
Reply
August 1, 2011 at 10:21 am
Roy
Nevermind, I missed the last paragraph of the first section.
Reply
August 15, 2011 at 9:39 pm
Reply
August 21, 2011 at 9:30 pm
One Network Engineer's journey to the CCIE CCIE Lab study begins
[...] it begins with a single step. I took that step tonight, when I began to follow the directions of this INE post. The post is named
How to pass the CCIE R&S with INEs 4.0 Training [...]
Reply
October 20, 2011 at 6:30 pm
John
Hi Mark,
Im looking at doing the R&S or the Voice CCIE path, from an additional expense point of view, which is less expensive?
Would it be the R&S as you can use the GNS3 for the kit replacement?
I would love to see a comparison of the associated costs relating to what additional hardware/software would be needed before I
sign up for your training program.
Looking foward to getting started
Cheers,
John
Reply
October 23, 2011 at 5:49 pm
I would say that you are probably correct, that R&S is most likely less expensive from the purely theoretical standpoint that you
should be able to do most of your studies on the GNS3/Dynamips platform(s).
That being said, I would imagine that the choice should probably also take into consideration which you have more
experience with. Either way you go, I would most definitely start at the CCNA level (either CCNA RS or CCNA Voice), then work
my way up through the CCNP level and finally onto CCIE. There is crucial information at those levels that will greatly aid you in
understanding what we dive into fairly heavily in lab complex multiprotocol scenarios at the CCIE level. So if you already have
a CCNA/CCNP at one of those levels, I would say you may want to consider that path.
-Mark
Reply
November 6, 2011 at 9:18 am
Reply
December 13, 2011 at 8:46 pm
Ethan M.
Lab day is tomorrow, and Im really wishing I wouldve come across this blog because its extremely detailed and very well thought
out. Pass/Fail, Ill be visiting back here for either a retake on my R&S or using the methods described here towards the next CCIE!! I
appreciate everything you guys do at INE and can say without a doubt there isnt a better program out there.
Reply
December 14, 2011 at 3:12 pm
Reply
January 19, 2012 at 11:15 am
Reply
February 6, 2012 at 9:03 am
Reply
February 6, 2012 at 9:02 am
Reply
February 24, 2012 at 12:04 am
Kenneth Ratliff
Just curious, but where should the VOL2 TS labs fit into this schedule?
Reply
February 24, 2012 at 5:12 am
Prashant
on which week we can give our R&S written exam according to this schedule?
I have CCNP level.
well thanks for your schedule.you are great man..grand salute
Reply
Marc h 1, 2012 at 2:58 am
timaz
Hi. when you mention e.g. spending week x to vol2-lab x, should we do both troubleshooting and configuration sections together on
that week or these parts are independent and solving ticket can be done alongside the whole preparation phase? tnx.
Reply
Marc h 1, 2012 at 4:03 am
timaz
please excuse me for another question. in this process you mentioned that VOL1 must be done in warm-up phase. but the labs
from VOL1 you mentioned is just 20% of VOL1. so when we should practice other parts of VOL1?
Reply
March 21, 2012 at 7:27 pm
Kenneth Ratliff
Each Vol2 lab has a reference section which goes into what VOL 1 labs it covers. I tend to look at that list before I do the VOL 2 lab,
and do them, then attempt the VOL2 lab. You use VOL1 and VOL2 in tandem when doing VOL2 labs, using the VOL1 labs to either
pre practice skills in the VOL2 lab, or brush up after youve done the VOL2 lab
Reply
One Network Engineer's journey to the CCIE Vol 1 progress, well on my way to Vol 2 and bootcamp
April 2, 2012 at 1:22 pm
[...] have been making some good progress on the Vol 1 workbook. Petr Lapukhovs How to pass the CCIE R&S with INEs 4.0
Training Program guide estimates 8 weeks to complete Vol 1, i am proud to say that I am more than halfway done after [...]
Reply
June 9, 2012 at 4:52 pm
Andrs B
On appendix B when you say that 3.Active Ethernet Connections. There should be a physical cabling diagram available.., i dont
found any physical cabling connection diagram in my WB2 folder. What you mean we this ?
Thanks in advance
Andrs
Reply
November 28, 2012 at 11:12 am
Reply
How to pass the CCIE R&S with INEs 4.0 Training Program (Petr Lapukhov) | Configure Network
January 29, 2013 at 6:10 pm
[...] How to pass the CCIE R&S with INEs 4.0 Training Program (Petr Lapukhov) January 29, 2013 Leave a reply [...]
Reply
February 21, 2013 at 1:51 pm
Craig
Very Cool! Ive been bobbing around, never really gaining traction on my CCIE, but this is a huge help!
I changed Ronaldos spreadsheet to fit my 12 month plan, added start dates for each week, and the description column to
each printed page so I could put it in my CCIE Binder. I like to scribble on things..
http://www.4shared.com/file/sQCEd7Q-/CCIE_Study_Plan_Craig.html
Thanks Petr (and Ronaldo)..
Reply
February 22, 2013 at 9:41 am
Reply
Marc h 6, 2013 at 2:09 pm
Reply
May 5, 2013 at 10:29 am
Reply
May 30, 2013 at 6:37 am
Reply
June 3, 2013 at 10:33 pm
Jonathan
This seems like a great plan to use the Lab Workbooks. But a quick question, where do the videos fit into this plan exactly? Every
week shows labs but when do you stop & watch the advanced CCIE videos included with the package?
-thanks -Jonathan
Reply
August 11, 2013 at 2:11 pm
Heath Mills
It is awesome to have a program to go by. My only question is, with this being an older article, is it just as relevant today?
Reply
August 19, 2013 at 11:52 am
Reply
August 28, 2013 at 12:02 am
Reply
October 5, 2013 at 11:31 pm
Reply
October 9, 2013 at 2:35 pm
Jonathan
I wanted to start with this plan in 1 month but Was wondering how this plan will fit in with the newer R&S v.5 workbooks that you guys
are developing?
Should I hold off on that newer v5 workbook or start with Vol1. as suggested?
Reply
November 1, 2013 at 12:39 am
William Carter
Hello INE! This is the plan I have been following for v4. I would kindly ask you to please update it once the v5 blueprint is released.
Pretty please Petr!
Reply
November 1, 2013 at 6:00 am
Reply
October 30, 2014 at 8:09 pm
Irvin Theunis
Hi There
Will the How to pass the CCIE R&S with INEs Training Program be updated seen that the CCIE R&S V5 is out already? I really find
the one for V4 very in depth. Please advise when it will be updated.
Thanks
Irv
Reply
November 1, 2014 at 10:36 am
Reply
December 7, 2014 at 8:23 pm
Scott
Hi,
This is an excellent post. What is the timeframe for updating it for v5? I recently bought the Lab Prep Ultimate Bundle and would like
to use the updated post to build by study plan/schedule.
Thanks,
Scott
Reply
December 8, 2014 at 2:22 pm
Reply
January 3, 2016 at 3:48 pm
Heath Mills
Brian,
Was there ever any progress made on this? I am really looking forward to finishing my CCIE Lab in December, 2016.
Reply
January 6, 2016 at 1:04 pm
Reply
Leave a Reply
Name (required)
Submit Comment
twitter.com/ine
pdfcrowd.com