Professional Documents
Culture Documents
14.83458
0.01223
29.4
43.3
2
29.4
23.9
1.356
1.356
1
2.00E-06
0.65
0.40
0.70
<= liquid film heat transfer coefficent at tower bottom conditions (set to zero if overall mass transfer coefficient is used)
<= gas film mass transfer coefficent for very dilute mixtures at tower bottom conditions.
degree C
degree C
<= Indicator for the combinations (TG1 and Tas1) will follow [-1 for (TG1, HR1), 0 for (TG1, Y1), 1 for (TG1, pA1), 2 for (TG1, Tas1)]
degree C
degree C The above three quantities should be input as a single array for GTH1
<= may use a negative number (-X) to indicate that L needs to be determined as X times the minimum or the maximum / X.
<= Either L or G or both must be specified. Input format is the same as L.
<= Operating pressure, atm
<= acceptable error in solution
<= the exponent in ky'a = f(T,P)*vG^beta*L^gamma.
<=the exponent in hLa = constant*L^eta*viscosity^(1-eta)/Pr^0.5 All the above four can be ignored.
Output
Results from function CoolingTowerHeight
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE! #VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!
#VALUE!