Professional Documents
Culture Documents
economical
easy to apply
polyester resin
OON
GS
OMIN
KF2
Powers offers the widest range of mechanical and adhesive fasteners in the market place.
Powers products cover the full traditional anchoring range while specialising in innovative
products that provide the architect, engineer and end user with aesthetic, high performance,
labour saving fastening solutions.
For fast technical advice, free samples and free on site demonstrations,
visit our website www.powers.com.au
Other Powers adhesive systems
Support
PF PRO
Heavy duty
Low odour
Pure epoxy
anchoring adhesive
In House Product
V12
High performance
Economical
Versatile
Vinyl ester resin
AC100 PRO
High performance.
Fast cure
Styrene free
National on Site
Anchor Testing
Service
AC100e
Standard caulking gun
Easy to apply
National On Site
Service
Powers Training
Vehicles (PTV)
Training Facility
Melbourne
April 2012
KF2
Contents
Introduction
Installation instructions
Suggested specification
April 2012
KF2
KF2
Introduction
The KF2 adhesive system consists of a cartridge and a static mixing nozzle for use
in attaching reinforcing bar and threaded rod to concrete, brickwork, and blockwork.
It is suitable for close to edge and high vibration applications and can be used with
the studs, mesh sleeves and accessories.
Product description
KF2 adhesive is packaged in a 420ml co-axial dispensing cartridge which includes a
special drive unit. A manually operated tool is used to dispense the adhesive which
is designed for use in the installation of threaded rod in solid concrete and masonry
materials. It can also be used with mesh tubes and threaded rod in hollow masonry
base materials. KF2 adhesive mortar bonds the anchor rod to the base material so no
expansion forces are exerted against the walls of the hole in the base material. This
makes the mortar ideal for use in anchoring to a variety of base materials ranging
from soft common brick to hard stone.
KF2 cartridges contain 420 ml of material. The cartridge is designed for use with the
Multi PRO dispensing tool CGPRO-4, designed for use with all Powers adhesives.
KF2 can also be dispensed using the dedicated CG380KF2 gun.
Each cartridge has pre-measured amounts of resin and hardener. The cartridges
are supplied with a special mixing nozzle to insure complete and proper mixing of
the components. As the components are pumped through the mixing nozzle, they
pass through a series of static mixing elements. The elements properly divide and
recombine the components to provide precise automatic mixing.
WORKING TIME
(Minutes)
2
4
6
12
20
CURING TIME
(Minutes)
20
25
45
80
120
PART NO
DESCRIPTION
QTY
KF2
CGPRO-4
CG380KF2
April 2012
KF2
Performance data
For anchor spacing, edge distance and combined loading information,
please refer to Section 8 of the Specification Guide. For critical spacing and
edge distance Rs=1.00 and Re(t & s)=1.00.
Spacing and
Edge Distance
DRILL
M8
M10
M12
M16
M20
M24
10
12
14
18
24
28
80
90
110
125
170
210
ANCHOR
SIZE
mm
DRILL
EMBED. DEPTH
mm
M8
M10
M12
M16
M20
M24
10
12
14
18
24
28
mm
mm
EMBED. DEPTH
mm
CONCRETE 32 MPa
ALLOWABLE BOND
STRENGTH
kN
4.9
6.6
9.5
15.9
24.7
35.6
CONCRETE 32 MPa
ALLOWABLE BOND
STRENGTH
kN
80
90
110
125
170
210
5.6
7.7
13.2
20.9
34.7
63.0
7.6
12.1
17.5
32.7
51.0
73.4
11.7
18.6
27.0
50.0
81.2
117.2
(A4-50)
8.1
12.8
18.6
24.5
53.9
77.9
4.2
6.7
9.8
18.6
29.0
41.8
6.5
104
15.1
28.6
46.3
66.7
Tension
Shear
(A4-50)
5.0
7.9
11.5
21.4
33.4
48.3
M8
M10
M12
M16
M20
M24
ANCHOR
SIZE
mm
M8
M10
M12
M16
M20
M24
DRILL
mm
EMBED.
DEPTH
mm
10
12
14
18
24
28
80
90
110
125
170
210
DRILL
mm
EMBED.
DEPTH
mm
10
12
14
18
24
28
80
90
110
125
170
210
CONCRETE 32 MPa
DESIGN
CAPACITY
NA (kN)
8.8
11.8
17.1
28.6
44.5
64.1
CONCRETE 32 MPa
DESIGN
CAPACITY
VA (kN)
10.1
13.9
23.8
37.6
62.5
113.4
CLASS 5.8
Ntf (kN)
Ntf (kN)
Ntf (kN)
15.2
24.1
35.1
65.3
101.9
146.8
23.4
37.1
53.9
100.0
162.4
234.4
16.2
25.6
37.2
69.0
107.8
155.8
CLASS 5.8
Vf (kN)
Vf (kN)
Vf (kN)
8.5
13.5
19.7
37.1
58.0
83.6
13.0
20.8
30.2
57.1
92.6
133.4
10.1
15.9
23.1
42.8
66.8
96.6
Anchor
Design Tension
Capacities
Anchor Design
Shear
Capacities
Note: Performance data is based on critical spacing and edge distance design criteria.
April 2012
KF2
HOLE SIZE
mm
mm
EMBEDMENT
DEPTH
mm
8
10
12
16
10
12
14
18
80
80
80
80
GUIDE
TORQUE
Nm
2.0
6.0
11.0
24.0
SOLID BRICK
TENSION
kN
4.5
8.3
9.4
10.3
SHEAR
kN
4.5
9.3
12.8
16.0
HOLE SIZE
mm
mm
EMBEDMENT
DEPTH
mm
8
10
12
16
10
12
14
18
80
80
80
80
GUIDE
TORQUE
Nm
2.0
6.0
11.0
24.0
SOLID BLOCK
TENSION
kN
1.9
3.7
4.7
6.2
SHEAR
kN
1.9
4.2
6.4
9.6
Note: Refer to the Powers Adhesive Anchoring Systems Design Manual for masonry design criteria
Design guidelines:
Working stress design
Divide characteristic ultimate load capacities by a factor of safety of 3.
Limit state design
Multiply characteristic ultimate load capacities by = 0.6.
April 2012
KF2
Estimating guide
Refer to Powers website, www.powers.com.au, downloads section and under software
you can download the latest Powers Adhesive Volume Calculator
Installation instructions
For installation instruction refer to the Adhesive Anchoring Systems Design Manual
Suggested specification
Powers Fasteners
April 2012
www.powers.com.au
E-mail :
info@powers.com.au
Distributor:
The content of this document is Copyright 2012 Powers Fasteners Australasia Pty Ltd (Powers). All rights reserved.
April 2012
April 2011