Professional Documents
Culture Documents
Research Scholar, School of Bioscience & Technology, VIT University, Vellore, Tamil Nadu, India
Research Scholar, Department of Chemical Engineering, BMS College of Engineering, Bangalore, Karnataka, India
ABSTRACT
In this entire world for those millions of people whose vision is impaired they have got eye gears for
rectification but for the truly blind people whose vision is darkened we dont have any therapeutics. So the recent
advancement in the technology has driven the mankind towards various approach like artificial implants for those blind
subjects and the bionic eye with retinal, ocular, sub retinal implant technique seems to be promising as it is an
integration of electronics, biomedical and the embedded engineering which acts as the artificial eye in interpreting the
materialistic images of the world and plays the active role of natural cones and rods for brain image interpretence. This
paper gives an overview of various retinal implant techniques in channelizing the subjects vision through artificial
intelligence and if it is commercialized becomes the potential device for the blind subjects to see and interpret the
KEYWORDS: Artificial Eye, Epi-Retinal Implant, Retinal Implant, Sub-Retinal Implant, Technology
Received: Apr 13, 2016; Accepted: Aug 02, 2016; Published: Aug 11, 2016; Paper Id.: IJEEERAUG201610
INTRODUCTION
Original Article
colorful world
The science has done several wonders to the mankind. We always have seen prosthetics which helped in
overcoming handicappers. Bi- medical engineers play an important role in shaping the course of the pros-the tics.
Now it is the responsibility of Artificial Vision through Bionic Eyes. The Chips are designed specifically to mimic
the characteristics of the damaged retina, cones, and rods of the organ of sight that are implanted with a
microsurgery. Whether it is Bio-medical, Computer, Electrical, or Mechanical Engineers all of them have a vital
role to play in the personification of Bionic Eyes. There is a hope for all the blinds in the form of Bionic Eyes.
This innovative technology can add life to their vision less eyes. Later, this will create a revolution in the field of
medical science. It is important to know certain facts about the organ of sight that is the human Eye before we
proceed towards the technical aspects involved in Bionic Eye Systems.
www.tjprc.org
editor@tjprc.org
88
electronic devices that assist these cells in performing the task of vision. We can make lakhs of people get back their vision
at least partially. A design of an optoelectronic retinal prosthesis system which can stimulate the retina with resolution that
corresponds to a visual activity of 20/80which is sharp enough to orient yourself towards object, recognize faces, read
large fonts, watch TV and perhaps most importantly lead an independent life.
Bionic-Eye as Artificial Eye
The lost vision can be bring back by bionic eye which is also known as visual prosthesis or retinal implant, the
device helps the blind to return to functional vision. is an experimental visual device intended to restore functional vision.
It generally takes the structure of an externally-worn camera that is close to a stimulator on the retina, optic nerve, or in the
visual cortex, in order to manufacture perceptions in the visual cortex. Bionic eye restores the vision lost due to damage of
retinal cells. The function of an Bionic Eye device, is to mimic the function of artificial eye. As it is made of the image
sensors, processors, radio transmitters & receivers, and the retinal chip clubbed together in a single domain which is wide
term for entire electronic system called as Bionic eye. The device is replaced in place of retina part of eyes, since device is
a circle about the size of a five-cent piece. The device delivers the stimulation as it is silicon based chip which decodes
radio signals. As the electrodes stimulated, using a small wires they send a signal to retinal ganglion cells, followed by
optical nerve then to brain by which the pattern of light and dark spots according to which electrodes have been stimulated.
The machine receives signals from a pair of glasses wear by the patient, which are fixed with a camera. The visual
information will be feed in separate image processing part within camera, by extracting certain features which plays role in
making the since of image. The component then breaks down the image into pixels and sends the information, one pixel at
a time, to the silicon chip, which then reconstructs the image. The radio waves are responsible for broadcasting the data
into the body. At present the equipment is only able to broadcast a 10 x 10 pixel. As there is chances of visual damage for
partial vision participants, so they are excluded and only the blind participants are included. By using latest version the user
able to make out between light and dark as well to see certain distinct objects as implant is array of 60 pixels, but the
ultimate aim is to make it to 1000 pixels by which the user will be able to recognize faces and also helps in reading.
The Bionic-Eye System
The Visual prosthetics can be broken down into three major groups. Firstly The use of devices like CCD camera
or the ultrasonics that capture the images and render the results to the system as sound or electrical inputs so that the
individual can perceive the image path near to him. The second major form is retina enhancing machine which mimic the
retinal functions by stimulating the retina with electrical signals which triggers the optic nerve to send message to the
brain. The third major category is the digital camera which helps in image sampling and stimulates the brain with electrical
signals--either by penetration or mounting the electrodes on the surface of the visual cortex.
Retinal Implant Systems
Now, Second Sight named company which got the approval from FDA to start the U.S. trails on a blind to get the
limited present of vision. The second generation Argus II is designed with a 60 electrode array and a much smaller receiver
that is implanted around the eye [7][8][9]. The Argus II is an electrode array that is surgically implanted onto the retina..
This electrode array is capable of sending signals to the brain which is impossible for the damaged human biological retina.
The electrode array is not very useful unless it is receiving visual data to send to the brain. To solve this problem the
patient is fitted with a pair of glasses embedded with a tiny video camera which continuously records footage of what is
Impact Factor (JCC): 6.1843
Bionic Eye An Artificial Vision & Comparative Study Based on Different Implant Techniques
89
present in front of the patient. This video signal is sent wirelessly to a computer which filters and processes the video
signal and feeds this compatible data to the electrode array. The Argus II Retinal Prosthesis System can provide sight by
detecting the light to people who have gone blind from degenerative eye diseases like macular degeneration and retinitis
pigmentosa. Both diseases deactivates the eyes' cones, rods and retina that perceive light patterns and pass them on to the
brain in the form of nerve impulses, wherein these impulse patterns are then decoded as images. The Argus II system is a
replacement for these photoreceptors. The second incarnation of 2nd Sight's retinal prosthesis consists of five main parts:
Digital-Camera embedded into a pair of glasses. It captures real time images and processes images to a microchip.
Video-Processing Microchip incorporated into a handheld unit. It catalyses images into electrical impulses that
represents the light and dark patterns
Radio-Transmitter will wirelessly transmit the impulses into a receiver that is implanted above the ear or under
the eye.
Radio-Receiver will send impulse to the retinal implant via hair-thin implanted wire.
pixel patterns. These images are video processed to convert the 3d structured patterns and are decrypted to artificial: light
and dark environment patterns. The processor interprets these pulses to a radio transmitter on the glasses, which then
transmits the pulses in the form of radio waves to a receiver implanted beneath the patients skin. The receiver is directly
connected by a wire to the array of electrodes implanted at temporal side of the eye, and it sends the pulses through the
wire [10]. Thus the impulses are then interpreted by the human brain and the message is displayed as you are seeing a
tree and thus the subject will identify the object.
Working
The working of Retinal implant system is depicted in Figure 1. Normally the vision starts when the light rays
falls on the cones and rods and interpreted by the retina through optic nerves. These cells convert optical signals into
electric impulses that are sent via optic nerve to the brain. Retinal diseases like ARM degeneration and RP destroy sight by
rupturing these cells. With the artificial bionic eye, a miniature camera mounted on the eye-gear captures the images and
wirelessly sends the information to a micro controller unit that converts the data to an electronic signal and re-transmits it
to a receiver on the eye. The receiver sends the signals through an optic cable to the microelectrode array, which triggers
the pulse emission. The artificial retinal device thus bypasses default photoreceptor cells and it is transmitted as electrical
signals directly to the retinas remaining viable cells [11]. These pulses travel along optic nerves to brain. Then brain
retrieves patterns of light and dark spots that correspond to the electrodes stimulation. Patients learn to interpret these
visual patterns. It takes some training for the subjects to actually see a tree. At first, they see mostly light and dark spots.
But after a due course of time, they learn to interpret what the brain is showing them. Eventually they perceive those
patterns of light and dark as a tree. Researchers are already planning a third version which consists of thousands of
electrodes on the retinal implant and they believe it could allow subjects for reading, facial recognition capabilities
purposes.
www.tjprc.org
editor@tjprc.org
90
Processed information is sent back to embedded glasses and wirelessly transmitted back to the receiver Under the
surface of eye
Bionic Eye An Artificial Vision & Comparative Study Based on Different Implant Techniques
91
Chip-Development
Bio-Compatibility
CHIP-DEVELOPMENT
Encoder Epi Retinal
The design of an epi-retinal encoder is more complex than the sub retinal encoder, because it has to feed the
ganglion cells. Here, a retinal encoder outside the eye replaces the information processing unit of the retina. These spatial
filters as biology-inspired neural networks can be 'tuned' to various spatial and temporal receptive field properties of
ganglion cells in the primate retina.
Biocompatibility
The materials that are chosen for the retinal implant production must be specifically bio-compatible and also
corrosion resistant and non-corrosive to match various criterias
The electrodes have to establish an even contact to the nerve cells within ECF, such that the stimulating electronic
current can pass through the photo elements into the tissue.
The chosen materials should be biologically similarly compatible with the nervous system.
RF Telemetry
In epi-retinal encoder, the wireless RF telemetry system acts as the transport channel between the Retinal Encoder
and the retinal stimulator. Standard semiconductor technology is used in fabrication of a power and the signal receiving
chips that drives current through the electrode array & stimulates the retinal neurons. The intra-occular Trans receiver
processing unit is separated from the stimulator in order to take into account the heat dissipation of the rectification and
power transfer processes. Care is taken to avoid direct contact of heat dissipating devices with the retina.
Sub Retinal Implants
The Sub retinal approach involves the electrical stimulation of the inner retina from the sub retinal space by
implantation of a semiconductor-based micro photodiode array (MPA) into this location. This is shown in Figure 3[13]. In
RP, the retinal pig mental epithelial cells begin to apopt out and the person starts loosing the sight gradually. Hence the
function of the retina to transducer the light into biological signal is hampered leading to blindness. Sub retinal implant is
used to substitute the lost RPE cells with the artificial cell basis to restore the vision. In this implant, a micro photodiode
array (MPD), a silicon micro manufactured device, or semiconductor micro photodiode array (SMA) is used. This implant
is placed behind the retina between the sclera and the bipolar cells. The incident light is transformed into neural potentials
that excite the bipolar cells to form an image sensation. The arrays can be manufactured by various silicon manufacturing
procedures. These devices have demonstrated the same electro-physiological & neurological behaviors as the healthy RPE
cells. The MPDA must to be very thin & flexible in order for it to fit to the curvature of the eye ball.
www.tjprc.org
editor@tjprc.org
92
Epi-retinal Approach involves a semiconductor based device positioned on the surface of the retina to try to
simulate the remaining overlying cells.
Sub retinal Approach involves implanting the ASR chip behind the retina to simulate the remaining viable cells.
Bionic Eye An Artificial Vision & Comparative Study Based on Different Implant Techniques
93
Advantages
The new technology will hopefully assist people suffering from AMD and individual suffering from RP.
The thing is to significantly improve the quality of life for blind patients.
Disadvantages
Challenges
There are lots of hurdles to be overcome by Bionic Eyes to become a success story. Human eyes are perhaps the
most sensitive of all organs in the body. A nano-sized imitate can create havoc in the eye.
There are around 120 million rods & 6 million cones in the retina of every healthy human eye. Creating an
artificial replacement for these cells is not an easy task.
Silicon based photo detectors have been experimented in earlier attempts. But Silicon is toxic to the human body
& reacts unfavorably with ocular eye fluids.
There are huge doubts as to how the brain will respond to foreign signals generated by artificial light sensors.
One of the toughest challenges seems to be ensuring the implant to remain in the eye for decades without causing
scarring, immune system responses, and general degradation from daily biological wear and tear.
These artificial retinas are still years away from becoming widespread because they are too expensive, too clunky,
and too fragile to withstand decades of normal wear and tear.
CONCLUSIONS
This is an innovative and revolutionary technology and really has the potential to change people's lives. Bionic
Eye is a revolution in medical field. It is a good news for blind patients who suffer from retinal diseases. Bionic eye
implant that could help in restoring the sight of millions of blind people within two years. Retinal implants are able to
partially restore the vision of people with particular forms of blindness caused by diseases like macular degeneration or
retinitis pigmentosa. About 1.5 million people around the globe have retinitis pigmentosa, and one in ten people above 55
have age related macular degeneration. The invention and implementation of bionic eye can help those people. Irrespective
of the pros & cons of this system, if this system is fully developed with a cutting edge technology it will change the lives of
millions of people around the world. We might not restore the vision completely, but we can try to help them to at least
find their path, recognize faces, read books, and above all lead an independent life of their choice.
www.tjprc.org
editor@tjprc.org
94
REFERENCES
1.
2.
3.
Ashley Hall, Diamond shines as basis for bionic eye prototype, ABC News, December 09, 2010.
4.
5.
6.
Kosta Grammatis, Rob Spence, Building the bionic eye; Hacking The human, Future of Journalism conference.
7.
Doe Technologies Drive Initial Success of Bionic Eye, Artificial Retina News, U.S. Department of Energy office of Science,
2009.
8.
9.
Bionic Eye Technology: An Advanced Version of Artificial Vision, Academia, Volume 2, Issue 7, July, 2012.
10. Xi Chen,Shiyou Xu,Nan Yao and Yong Shi, 1.6v nanogenerator for Mechanical Energy harvesting using PZT nanofibers,
Nano Letters 2010, 10, pp. 21332137
11. M.S Humayun, J.D Weiland, G.Chader, Basic research, biomedical engineering and clinical advances,2007,pp. 151-206.
12. Asher,A.;Segal,W.A.;Baccus,S.A.;Yaroslavsky,L.P.;Palanker,D.V., Imageprocessing for A High-Resolution Optoelectronic
Retinal Prosthesis, IEEE transactions on Biomedical Engineering, vol. 54, no. 6,pp. 993-1004, June 2007
13. Kosta Grammatis,Rob Spence, Building the bionic eye; Hacking the human, Future of Journalism. conference,
www.eyeborgproject.com
14. Guang Zhu, Rusen Yang, Sihong Wang and Zhong Lin Wang, School of Materials Science and Engineering, Georgia Institute
of technology,Atlanta,Georgia,Flexible High-Output Nanogenerator based on lateral ZnO Nanowire Array, Published,
Copyright American chemical Society.
15. Bionic Eye Technology: An Advanced Version of Artificial Vision, Academia, Volume 2, Issue 7, July, 2012.