Professional Documents
Culture Documents
Permeate Carrier: Nylon Mesh which carries purified water to the centre tube
Feed Spacer: PP mesh which facilitates passage of raw water as a thin film across the
membrane surface and also creates turbulence of feed water thus reduces deposition on
membrane surface
Adhesive: Epoxy based 2 part adhesive which joins the multiple layers of the membrane
element
Core Tube: Plastic tube which gives structural strength and acts as permeate water
channel
Rejections Problem
Any process will vary with time and membrane rolling is also has process variables and this
results in rejections. The rejections in semi automatic rolling process are generally higher
compared to fully automatic machine as operator skill plays major role .
115.79
Min
98
Max
140.94
Std Deviation
11.01
MODEL
LINE
OPERATOR NAME
HTFC-75
Rakesh
HTFC-75
Abinav
HTFC-75
Thapa
17
HTFC-75
Ramesh
13
HTFC-75
Subodh
HTFC-75
Manish
12
HTFC-75
Santhosh
18
HTFC-75
Goswami
105
HTFC-75
Saxens
13
10
HTFC-75
Ravi
11
HTFC-75
Raju
11
204
6.00
5.00
4.42
4.00
3.00
2.65
1.89
2.00
1.00
3.67
3.34
2.42
2.09
0.90
0.70
3.55
3.20
2.31
1.84
1.030.89
0.49
1.14
1.09
0.71
0.91
0.81
0.52
1.21
0.79
0.23
0.00
April
Top Five Problems
1.Dent Problem in Membrane
2.Wrong Selection of Shaft for Trimming
May
June
2.73
1.51
0.93
Do Analysis by various Quality tool (at least 5) to reduce the rejection of membrane .
Thank You!!
Team Opcellence
E-mail: opcellence@mdim.ac.in
Management Development Institute, Murshidabad