Professional Documents
Culture Documents
Volume
Install SIPMON on
VMwareESXi
Synergy Information
No. 21/B, 3rd Floor
Nawala Pagoda Crossing Road
Sri Lanka
Phone +94 777 272 613 Fax 203.555.0168
Contents
Supported VMware Versions ....................................................... 2
Support for VMware vMotion ....................................................... 2
Shared storage ......................................................................................... 2
VMFS volume sharing .............................................................................. 2
Gigabit Ethernet interconnectivity ............................................................. 2
Processor compatibility ............................................................................. 2
S I P M O N
Chapter
M O N I T O R I N G
The storage for the VM must reside on a storage area network (SAN), and the SAN must be accessible by all the VMware hosts that can host the VM being
moved.
VMFS volume sharing
The VMware host must use shared virtual machine file system (VMFS) volumes.
Gigabit Ethernet interconnectivity
The SAN and the VMware hosts must be interconnected with Gigabit Ethernet links.
Processor compatibility
Processors must be from the same vendor and processor family for vMotion compatibility.
Support for Open Virtualization Format
SIPMON supports the Open Virtualization Format (OVF) templates that you can use to install and deploy SIPMON on virtual machines (VMs).
Virtual Machine Requirements
To achieve performance and scalability comparable to the hardware appliance, the VMware virtual machine should be allocated system resources as below.
Requirement Type
Minimum Requirements
CPU
Memory
16 to 32 GB RAM
Hard disks
The storage system for the SIPMON virtual appliance requires a minimum write performance of 50 MB per second and a read
performance of 300 MB per second.
Deploy a storage system that meets these performance criteria and is supported by VMware server.
Disk controller
NIC
Hypervisor
Number of Services
<500
500-2000
2000 - 10000
10000 - 20000
20000 - 50000
50000 - 100000
100000 - 200000
200000 - 300000
300000 - 400000
Number of pollers
1 central
1 central
1 central + 1 poller
1 central + 1 poller
1 central + 2 poller
1 central + 3 poller
1 central + 3 poller
1 central + 4 poller
1 central + 4 poller
Central
1 vCPU / 4GB
2 vCPU / 4GB
4 vCPU / 8GB
4 vCPU / 12GB
4 vCPU / 12GB
4 vCPU / 12GB
4 vCPU / 16GB
4 vCPU / 24GB
4 vCPU / 32GB
Poller
2 vCPU / 4GB
2 vCPU / 4GB
2 vCPU / 4GB
2 vCPU / 4GB
2 vCPU / 8GB
2 vCPU / 8GB
2 vCPU / 8GB
Number of Services
<500
500-2000
2000 - 10000
10000 - 20000
20000 - 50000
50000 - 100000
100000 - 200000
200000 - 300000
300000 - 400000
Size
50GB
100GB
180GB
540GB
720GB
1 TB
1.5TB
2.0TB
2.5TB
Step 1
Step 2
Choose File > Deploy OVF Template from the VMware vSphere Client.
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
SIPMON supports both thick and thin provisioning. However, we recommend that you choose thick provisioning for better performance.
Verify the information in the Ready to Complete page. Check the Power on after deployment check box.
Step 1
Go to Console and press CTRL + ALT + F2 and log in to SIPMON by using root / P@ssw0rd
Step 2
Step 3
Step 4
Step 5
Step 1
Step 2
Step 3
Step 4
Run service network restart to apply the above chenges and verfy the IP address.
Step 5
Go web browser ( Chrome is recommended ) and type SIPMON mamangment IP and enter.
Login as admin / admin
Enable Dashboard