Professional Documents
Culture Documents
Forensic Duplicator
Solutions for the Digital Evidence Lifecycle
Cable Recommendations
Source
Destination
8
5a
2a
3a
4a
3b
5b
2b
1
4b
(2x)
Step-by-Step Installation
1. Membrane Power Switch
Confirm TD2 is OFF
drive to TD2
destination drive(s)
LED Indicators
DC Power In
Power available at
power source
IDE or SATA
Source Detect
Flashing illumination:
Detecting IDE or
SATA source drive
Steady illumination:
IDE or SATA source
drive detected
Power
Duplicator turned ON
Alert
Flashing illumination:
Activity paused, user
response required
Steady illumination:
Read/write failure
encountered
Busy
Source or destination
drive activity
For the TD2 Users Guide and additional product information, visit www.tableau.com/td2.
Guidance Software
W223 N608 Saratoga Drive
Waukesha, WI 53186
Toll Free: 1 (866) 973-6577
Main: 1 (626) 229-9191
www.tableau.com
Duplicate Disk *
Disk-to-Disk
Disk-to-File
Format (FAT32)
Format Destination
Format USB
Wipe Disk
(Destination Only)
One-Pass Write
Multi-Pass Write
Hash Utilities
Source
(MD-5 & SHA-1)
Blank Check
Source Disk
Destination 1 Disk
Destination 2 Disk
Disk Information
Source Disk
Destination 1 Disk
Destination 2 Disk
Disk Utilities
Remove DCO & HPA
Remove HPA
Logs
View Logs
Save All Logs
Print All Logs
Erase Logs
Setup
System Options
Imaging Options
TD2 Options
Factory Reset
2012 Guidance Software, Inc. All Rights Reserved. EnCase and Guidance Software are registered trademarks or trademarks owned by Guidance
Software in the United States and other jurisdictions and may not be used without prior written permission. All other marks and brands may be
claimed as the property of their respective owners. Updated 11-2012.