Professional Documents
Culture Documents
September 2012
Prepared for
ERDC/ITL TR-12-X
September 2012
ERDC/ITL TR-12-X
Abstract
The A/E/C CAD Standard has been developed by the CAD/BIM Technology
Center (Center) for Facilities, Infrastructure, and Environment to eliminate
redundant Computer-Aided Design (CAD) standardization efforts within
the Department of Defense (DoD) and the Federal Government. The
manual is part of an initiative to develop a nonproprietary CAD standard
that incorporates existing industry, national, and international standards
and to develop data standards that address the entire life cycle of facilities
within the DoD.
The CAD drafting standards addressed in the A/E/C CAD standard include
presentation graphics, level/layer assignments, electronic file naming, and
standard symbology. The Center's primary goal is to develop a CAD
standard that is generic enough to operate under various CAD software
packages (such as Bentley's MicroStation and Autodesk's AutoCAD) and
incorporate existing industry standards when possible.
DISCLAIMER: The contents of this report are not to be used for advertising, publication, or promotional purposes.
Citation of trade names does not constitute an official endorsement or approval of the use of such commercial products.
All product names and trademarks cited are the property of their respective owners. The findings of this report are not to
be construed as an official Department of the Army position unless so designated by other authorized documents.
DESTROY THIS REPORT WHEN NO LONGER NEEDED. DO NOT RETURN IT TO THE ORIGINATOR.
ii
ERDC/ITL TR-12-X
iii
Contents
Abstract................................................................................................................................................... ii
Figures and Tables ..................................................................................................................................v
Preface ...................................................................................................................................................vii
1 Introduction..................................................................................................................................... 1
Acronyms .................................................................................................................................. 1
Scope ........................................................................................................................................ 1
Purpose ..................................................................................................................................... 2
Background .............................................................................................................................. 2
Target Systems ......................................................................................................................... 2
Design Applications and Other Applications ........................................................................... 3
Coordination with Design Agent .............................................................................................. 3
Additions/Revisions ................................................................................................................. 3
2 Drawing File Organization ............................................................................................................. 5
Design Area .............................................................................................................................. 5
Available drawing area ................................................................................................................ 5
File accuracy (units) ..................................................................................................................... 5
International Feet versus Survey Feet (V8)................................................................................. 6
Origin (global origin) ..................................................................................................................... 6
Text .......................................................................................................................................... 28
Text styles/fonts ......................................................................................................................... 28
Text height .................................................................................................................................. 30
ERDC/ITL TR-12-X
iv
ERDC/ITL TR-12-X
Tables
Table 2-1. Discipline Designators. .......................................................................................................... 11
Table 2-2. Discipline Designators with Level 2 Designators. ............................................................... 11
Table 2-3. Model File Types. .................................................................................................................... 17
Table 2-4. Sheet Type Designators. ........................................................................................................ 22
Table 3-1. Comparison of Line Widths. .................................................................................................. 25
Table 3-2. Standard Line Types/Styles................................................................................................... 26
ERDC/ITL TR-12-X
vi
ERDC/ITL TR-12-X
Preface
Introduction
The A/E/C CAD Standard has been developed by the CAD/BIM Technology
Center (Center) for Facilities, Infrastructure, and Environment to eliminate
redundant Computer-Aided Design (CAD) standardization efforts within
the Department of Defense (DoD) and the Federal Government. The
manual is part of an initiative to develop a nonproprietary CAD standard
that incorporates existing industry, national, and international standards
and to develop data standards that address the entire life cycle of facilities
within the DoD. This report supersedes A/E/C CAD Standard, Release 4.0
(ERDC/ITL TR-9-2).
The Center acknowledges the support of the Corps Field Action CAD (FAC)
committees, especially Jason Fairchild, Headquarters, U.S. Army Corps of
Engineers. Special thanks go to Roger Fujan, U.S. Army Engineer District,
Omaha; Ed Mathison, U.S. Army Engineer District, Louisville; and James
Sherman, U.S. Army Engineer District, Portland, for agreeing to serve on a
committee that assisted in reviewing/evaluating recommended changes to
the standard.
The Center is located in the Information Technology Laboratory (ITL),
U.S. Army Engineer Research and Development Center (ERDC),
Vicksburg, MS. The Director of ITL is Dr. Reed L. Mosher, and the Acting
Deputy Director is Dr. Kevin M. Barry. At the time of publication of this
report, the Director of ITL was Dr. Reed L. Mosher, the Acting Deputy
Director was Dr. Kevin M. Barry, the Chief of Software Engineering and
Informatics Division was Ken Pathak, and the Chief of the Tri-Service
CAD/BIM Technology Center was Edward L. Huell. The Director of ERDC
was Dr. Jeffery P. Holland, and the Commander of ERDC was
COL Kevin J. Wilson.
vii
ERDC/ITL TR-12-X
viii
ERDC/ITL TR-12-X
Introduction
Acronyms
First, a few useful acronyms:
A-E Architect-Engineer
A/E/C Architecture, Engineering, and Construction
AIA American Institute of Architects
ANSI American National Standards Institute
ASTM American Society for Testing and Materials
BIM Building Information Modeling
CAD Computer-Aided Design
CSI Construction Specifications Institute
DoD Department of Defense
FM Facility Management
GIS Geographic Information System
IAI International Alliance for Interoperability
IFC Industry Foundation Class
ISO International Organization for Standardization
NCS United States National CAD Standard
NIBS National Institute of Building Sciences
SI International System of Units (Le Systme International dUnits)
UDS Uniform Drawing System
Scope
This manual provides guidance and procedures for preparing ComputerAided Design (CAD) products within the Department of Defense (DoD).
Chapters 1-5 of this manual address topics such as presentation graphics,
level/layer assignments, electronic file naming, and standard symbology.
Appendices A-D contain tables on model and sheet file level/layer names,
color comparisons, as well as Architecture, Engineering, and Construction
(A/E/C) CAD symbology.
ERDC/ITL TR-12-X
Purpose
The purpose of this manual is to set a basic CAD standard to ensure
consistent electronic deliverables (products) within the DoD. These consistent deliverables are part of a comprehensive installation life-cycle
management strategy. This manual sets a CAD standard specifically for the
A/E/C disciplines of facilities development and civil works projects.
Background
The immediate benefits of CAD standards are many:
Target Systems
This standard does not target any specific CAD system or software.
However, to ensure successful translations among CAD applications,
certain system-specific characteristics were considered and the standard
adjusted accordingly. During the preparation of the standard, several
baseline decisions were made:
ERDC/ITL TR-12-X
Additions/Revisions
This standard is intended to be neither static nor all-inclusive and thus
will be updated and enhanced as appropriate. Suggestions for improvements are strongly encouraged so that subsequent updates will reflect the
input and needs of CAD users.
ERDC/ITL TR-12-X
ERDC/ITL TR-12-X
Design Area
Available drawing area
The two most extensively used CAD applications within the DoD,
AutoCAD and MicroStation, both provide for a drawing area with nearly
infinite range in each positive and negative axis (x,y,z).
File accuracy (units)
CAD systems allow the designer to work in real-world units. The most
common units are feet:inches, feet:thousandths of feet, and
meters:millimeters.
MicroStations approach to file accuracy allows the user to set the working
units (i.e., real-world units) as the following:
Master Units = The largest unit that may be referred to when working
in the design file (e.g., feet, meters)
Sub Units = Subdivisions of Master Units (e.g., inches, millimeters)
ERDC/ITL TR-12-X
ERDC/ITL TR-12-X
ERDC/ITL TR-12-X
ERDC/ITL TR-12-X
Figure 2-2. Sheet file composition using Design Model and Sheet Model.
Project code
The Model File naming convention and the Sheet File naming convention
both allow for a Project Code (1- to 20-characters) at the beginning of the
file name. The Project Code should be identified at the start of each project
to ensure consistent file names within that project. Some examples of
Project Codes are:
The use of Project Codes in file names prevents the same file name from
existing in different directories. When this field is used, standard naming
should consider use of a special character such as an underscore _ for all
model files so that folder sorting routines group like files together.
When a project includes multiple sites or buildings, it is important to
identify each file with the appropriate feature. This should be done as a
part of the Project Code. For example, a model file for project P123,
building 2, could possibly use a Project Code of _P123-Bldg2.
Model file naming convention
The model file naming convention (Figure 2-3) has four mandatory fields.
All fields must be used and in the correct sequence.
ERDC/ITL TR-12-X
10
Following the Project Code field, the first two-character field represents
the Discipline Designator. The allowable characters for the first character
in the Discipline Designator are listed in Table 2-1. The second character
of the Discipline Designator field is either a hyphen - (the use of which
results in this being referred to as a Level 1 Discipline Designator) or an
alphabetical Level 2 Designator (Table 2-2). The next two-character field
represents the Model File Type (Table 2-3). The final four-character field
is User Definable.
Note: In NCS V 5.0, user-defined Level 2 Designators are allowed to
differentiate among multiple buildings on a campus or among multiple
features on a large civil works project. Should this option be chosen,
Table 2-2 Level 2 Designators should not be used, in order to avoid
confusion.
Example. The model file name for a project at the U.S. Army Engineer
Research and Development Center (ERDC), Building 8000, 1st floor,
Architectural Floor Plan could be:
ERDC8000A-FPF1XX.dgn/dwg
where ERDC8000 is the Project Code, A- is the Discipline Designator, FP
is the Model File Type (Floor Plan), and F1 is a user-definable set of characters for Floor 1. Since not all of the user-definable characters were used,
the characters XX were used as placeholders.
ERDC/ITL TR-12-X
11
Designator
General
Hazardous Materials
Survey/Mapping
Geotechnical
Civil
Landscape
Structural
Architectural
Interiors
Equipment
Fire Protection
Plumbing
Process
Mechanical
Electrical
Distributed Energy
Telecommunications
Resource
Other Disciplines
Contractor/Shop Drawings
Operations
Designator
Description
Content
G-
All General
GC
General Contract
GI
General Information
GR
General Resource
H-
All Hazardous
Materials
HA
Asbestos
General
Hazardous Materials
ERDC/ITL TR-12-X
Discipline
Survey/Mapping
Geotechnical
Civil
12
Designator
Description
Content
HC
Chemicals
HL
Lead
HP
PCB
HR
Refrigerants
V-
All Survey/Mapping
VA
Aerial Survey
VC
Computated Points
VF
Field Survey
VH*
Hydrographic Survey
VI
Digital Survey
VN
Node Points
VS
Staked Points
VU
Combined Utilities
B-
All Geotechnical
BB*
Boring Logs
Boring logs
BS*
Stratigraphy
Stratigraphy profiles
C-
All Civil
CB*
Civil Beach
Renourishment
CD
Civil Demolition
CE*
Civil Ecosystem
Restoration
Environmental restoration
CF*
CG
Civil Grading
CH*
Civil Shore
Protection
CI
Civil Improvements
CN
Civil Nodes
CN*
Civil Navigation
CO*
CP
Civil Paving
CR*
Civil Recreation
Recreation facilities
CS
Civil Site
ERDC/ITL TR-12-X
Discipline
Landscape
Structural
13
Designator
Description
Content
CT
Civil Transportation
CU
Civil Utilities
CX*
Civil Security
Security-related work
L-
All Landscape
LD
Landscape
Demolition
LG
Landscape Grading
LI
LL
Landscape Lighting
LP
Landscape Planting
Landscape planting
LR
Landscape
Relocation
LS
Landscape Site
S-
All Structural
SB
Structural
Substructure
SC*
Structural
Components
SD
Structural
Demolition
SF
Structural Framing
SR*
Structural
Reinforcement
SS
Structural Site
ST*
Structural
Superstructure
A-
All Architectural
AD
Architectural
Demolition
AE
Architectural
Elements
General architectural
AF
Architectural Finishes
AG
Architectural Graphics
AI
Architectural Interiors
AS
Architectural Site
Architectural
ERDC/ITL TR-12-X
Discipline
Interiors
Equipment
Fire Protection
Plumbing
14
Designator
Description
Content
I-
All Interiors
ID
Interior Demolition
IF
Interior Furnishings
IG
Interior Graphics
IN
Interior Design
Q-
All Equipment
QA
Athletic Equipment
QB
Bank Equipment
QC
Dry Cleaning
Equipment
QD
Detention
Equipment
QE
Educational
Equipment
Chalkboards, library
QF
Food Service
Equipment
QH
Hospital Equipment
QL
Laboratory
Equipment
QM
Maintenance
Equipment
QP
Parking Lot
Equipment
QR
Retail Equipment
QS
Site Equipment
QT
Theatrical
Equipment
QV
Video/Photographic
Equipment
QY
Security Equipment
F-
FA
FX
Fire Suppression
P-
All Plumbing
PD
PL
Plumbing
ERDC/ITL TR-12-X
Discipline
15
Designator
Description
Content
PP
Plumbing Piping
PQ
PS
Plumbing Site
D-
All Process
DD
Process Demolition
DE
Process Electrical
DG
Process Gases
DI
Process
Instrumentation
DL
Process Liquids
DP
Process Piping
DQ
Process Equipment
DS
Process Site
M-
All Mechanical
MD
Mechanical
Demolition
MH
Mechanical HVAC
MI
Mechanical
Instrumentation
MP
Mechanical Piping
MS
Mechanical Site
MY*
Mechanical
Hydraulic Systems
E-
All Electrical
EA*
Electrical Airfield
Visual air navigation systems
Lighting and Navaids
EC*
Electrical Cathodic
Protection
ED
EG*
Electrical Grounding
EI
Electrical
Instrumentation
Process
Mechanical
Electrical
ERDC/ITL TR-12-X
Discipline
Telecommunications
Resource
16
Designator
Description
Content
EL
Electrical Interior
Lighting
Interior lighting
EP
Electrical Interior
Power
Interior power
ES
Electrical Site
ET
Electrical
Telephone, network, voice, and data cables
Telecommunications
EY
Electrical Interior
Auxiliary Systems
T-
TA
Audio Visual
TC
TD*
TI
Intercom
TM
Monitoring
TN
Data Networks
TS*
SCADA
TT
Telephone
TY
Security
R-
All Resource
RA
Resource
Architectural
RC
Resource Civil
RE
Resource Electrical
RM
Resource
Mechanical
RR
Resource Real
Estate
RS
Resource Structural
Other Disciplines
Contractor/Shop
Drawings
Operations
ERDC/ITL TR-12-X
17
Hazardous Materials
Survey/Mapping
Geotechnical
Civil
Code
Definition
BS
Border Sheet
CS
Cover Sheet
KP
Key Plan
DT
Detail
EL*
Elevation
LG
Legend
PP
QP*
Equipment Plan
SC
Section
XD*
Existing/Demolition Plan
AL
CP
EU
HP
HT
LG
Legend
PB
Property Boundary
PR
Existing Profile
SC
Existing Section
SP
UP
DT
Detail
JP
LB
Boring Log
LG
Legend
PV
SC
Section
SH*
Schedule
SI
AF
Airfield Plan
BR
DT
Detail
EL
Elevation
ER
Eco-Restoration Plan
FC
ERDC/ITL TR-12-X
Discipline
Landscape
Structural
18
Code
Definition
GP
Grading Plan
IP*
JP
KP*
Staking Plan
LG
Legend
NG
Navigation/Dredging Plan
PL*
PR
Profile
SC
Section
SH*
Schedule
SP
Site Plan
TS
UP
Utilities Plan
XD*
Existing/Demolition Plan
DT
Detail
EL*
Elevation
IP
Irrigation Plan
LG
Legend
LP
Landscape Plan
SC*
Section
SH*
Schedule
XD*
Existing/Demolition Plan
3D
Isometric/3D
BP
Bridge Plan
CP*
Column Plan
CW
DT
Detail
EL
Elevation
EP
Enlarged Plan
FC
FP
Framing Plan
LD
LG
Legend
NP
Foundation Plan
SC
Section
SH
Schedule
ERDC/ITL TR-12-X
Discipline
Architectural
Interiors
Fire Protection
19
Code
Definition
XD*
Existing/Demolition Plan
3D*
Isometric/3D
AC
CP
DT
Detail
EL
Elevation
EP*
Enlarged Plan
FP
Floor Plan
LG
Legend
QP
Equipment Plan
RP
Roof Plan
SC
Section
SH*
Schedule
XD*
Existing/Demolition Plan
3D*
Isometric/3D
DT
Detail
EL
Elevation
EP*
Enlarged Plan
FL
Floor Patterns
LG
Legend
QP*
Equipment Plan
RP
Furniture Plan
SC*
Section
SH*
Schedule
SP
WP
XD*
Existing/Demolition Plan
3D*
Isometric/3D
DG*
Diagram
DT
Detail
FA
FP
LG
Legend
LP
SH*
Schedule
XD*
Existing/Demolition Plan
ERDC/ITL TR-12-X
Discipline
Plumbing
Mechanical
Electrical
20
Code
Definition
3D*
Isometric/3D
DG
Diagram
DT
Detail
EL*
Elevation
EP*
Enlarged Plan
LG
Legend
PP
Piping Plan
SH*
Schedule
XD*
Existing/Demolition Plan
3D*
Isometric/3D
DG
Diagram
DT
Detail
EL
Elevation
EP*
Enlarged Plan
HP
HVAC Plan
HS
Hydraulic Systems
HT
LG
Legend
MD
MH
QP*
Equipment Plan
SC
Section
SH*
Schedule
SP
XD*
Existing/Demolition Plan
AL
AP*
CP
DG
Diagram
DT
Detail
EU
GP
LG
Legend
LP
Lighting Plan
PP
Power Plan
PS*
Panel Schedule
ERDC/ITL TR-12-X
Discipline
Telecommunications
21
Code
Definition
SH*
Schedule
SS
XD*
Existing/Demolition Plan
DG
Diagram
DT
Detail
LG
Legend
SH*
Schedule
TP
Telephone/Data Plan
XD*
Existing/Demolition Plan
ERDC/ITL TR-12-X
22
Designator
Large Scale Views (plans, elevations, or sections that are not details)
Details
User Defined
User Defined
ERDC/ITL TR-12-X
23
Note: If the sheet sequence number goes above 99 sheets for a particular
discipline, the user might want to consider using the Level 2 Designator in
the Discipline Designator to further subdivide the discipline (Table 2-2).
Note: According to the NCS: Sheet Sequence Numbers need not be
sequential, to permit future insertion of sheets during design.
Note: Occasionally, more than one Sheet Type (e.g., plan, elevation,
detail) will be represented in one sheet file. If this is the case, the dominant Sheet Type determines the Sheet Type Designator.
For example, the sheet file name for a project at ERDC, Building 8000,
Architectural Floor Plan, sheet sequence 02 could be:
ERDC8000A-102.dgn/dwg
where ERDC8000 is the Project Code, A- is the Discipline Designator, 1 is
the Sheet Type Designator (Plan), and 02 is the Sheet Sequence Number.
Adding a drawing sheet
If a sheet needs to be added between two sequential sheets, a Supplemental
Drawing Designator may be appended to the end of a sheet file name
(Figure 2-5). For example, if two sheets need to be added between sheets
ERDC8000A-104 and ERDC8000A-105, then the sheet file names for the
inserted sheets would be ERDC8000A104-A and ERDC8000A104-B. For
more information on adding additional sheets, see Adding or deleting
drawing sheets and index sheet procedures from Chapter 11 Drawing
Revisions in ERDC/ITL TR-12-1 CAD Drafting Standard.
ERDC/ITL TR-12-X
24
Figure 2-6. Typical border sheet title block with sheet identification block
ERDC/ITL TR-12-X
25
Graphic Concepts
Presentation Graphics
The first step in establishing an effective CAD standard is the development
of a uniform approach to presentation graphics. Presentation graphics
typically consist of drawing elements such as lines, arcs, shapes, text, and
their attributes (line color, line width, and line style). This chapter
presents brief overviews of the characteristics of presentation graphics and
the philosophy used to standardize them.
Line widths
Although monowidth line work is not contractually improper, varied line
widths substantially improve readability. Most commercial CAD systems
provide an extensive variety of line widths. However, for the majority of
A/E/C drawings, the eight line widths defined in Table 3-1 are considered
sufficient and should not be expanded unless an appreciable improvement
in drawing clarity or contrast can be realized. Table 3-1 shows information
about the various allowed line widths.
Table 3-1. Comparison of Line Widths.
Line Thickness
mm
in.
MicroStation
Line Weight
Typical Use
Fine
0.18
0.007
wt = 0
Thin
0.25
0.010
wt = 1
Medium
0.35
0.014
wt = 2
Wide
0.50
0.020
wt = 3
Extra Wide
0.70
0.028
wt = 5
XX Wide
1.00
0.040
wt = 7
XXX Wide
1.40
0.055
wt = 10
XXXX Wide
2.00
0.079
wt = 15
ERDC/ITL TR-12-X
26
Note: The NCS does offer an Extra Fine (0.13 mm) line width. However,
the legibility on printouts becomes more difficult when the line width goes
below the Fine (0.18 mm) line width. The NCS even states Use of Extra
Fine line widths should be avoided if the drawing will be plotted half-size.
Line types/styles
The predominant line types/styles used in this standard are listed in
Table 3-2 and are available as installed line types/styles in AutoCAD and
MicroStation. The Center has also created custom line style files for
MicroStation and AutoCAD, which include additional discipline line styles
(see Appendix D). These files are available on the Centers web site at
https://cadbim.usace.army.mil/cad.
Table 3-2. Standard Line Types/Styles.
ID Description
MicroStation
Designator
AutoCAD
Designator
Continuous
Continuous
Dotted
Dot
Dashed
Hidden
Dashed spaced
Dashed
Dashed dotted
Dashdot
Dashed doubledotted
Divide2
Chain
Center
Example
Line color
The primary reason to use color in CAD drawings is to improve the clarity
of the drawing on a computer monitor. The variety of colors available in a
CAD application depends on the capabilities of the computer monitor and
its video card. Today, most systems are capable of displaying up to 16.8
million colors. For consistency, this manual recommends that all A/E/C
drawings be created using the basic colors presented in Table 3-3
whenever possible.
Note: The recommended colors are best viewed on a monitor with a
black background.
ERDC/ITL TR-12-X
27
Ratios of RGB
Color
AutoCAD
MicroStation
Red
Green
Blue
Blue
255
Gray
128
128
128
Green
255
Red
255
Yellow
255
255
Magenta
255
255
Cyan
255
255
White
255
255
255
Note: Color numbers for AutoCAD and MicroStation were taken from default color tables.
Screening
Screened images are created through a process in which the density and
pattern of black and white dots are varied to simulate different shades of
gray. Varying the intensity of gray scales allows users to distinguish
different aspects of a drawing when it is plotted. For example, an area on a
site designated for demolition can be assigned a color that has been
assigned a screening percentage. When plotted, the area will be shown at a
lighter shade compared with other elements in the drawing. This will allow
the contractor to immediately identify the demolition area on the drawing.
Table 3-4 lists colors recommended to be used for screening along with a
recommended screening percentage. Optionally, when variations in
screening are not important, a single screening can be applied to all
screened graphics.
Plotting
Printers and plotters are controlled by files called pen tables or feature
tables. These files (tables) convert thicknesses and/or color in an electronic file to line thicknesses on a paper drawing.
ERDC/ITL TR-12-X
28
MicroStation
Color No.
Screen percent
Color No.
Screen percent
Red
Green
Blue
250
60
60
102
102
102
251
50
200
50
128
128
128
252
40
168
40
153
153
153
253
30
120
30
179
179
179
254
20
56
20
204
204
204
Text
Text styles/fonts
Each of the two major CAD platforms contain sets of fonts that have been
designed for use in CAD drawing presentation. MicroStation has various
fonts stored in font resource files, with each resource file capable of
containing multiple fonts. AutoCAD has individual fonts as shape files. In
addition, each platform has the ability to support TrueType fonts that are
installed on the individual computer. Each application also has the ability
to create additional fonts for its use. Since projects designed in CAD are
planned for use many years into the future and files will be used by many
different individuals, use of any nonstandard font is not recommended.
This includes fonts for symbology, logos, business titles, etc.
There is not a direct relationship between MicroStation resource files and
AutoCAD shape files. Therefore, it is important that font use be reviewed at
the start of a project and decisions made on fonts that are then used
consistently throughout the project by all disciplines. Previous releases of
the A/E/C CAD Standard allowed the use of various AutoCAD, MicroStation, and TrueType fonts. To improve the direct translation of fonts
between applications, only TrueType fonts are now allowed in the A/E/C
CAD Standard.
ERDC/ITL TR-12-X
29
Contrasting text styles (or fonts) are used within a drawing to delineate
types of information. In most A/E/C drawings, the fonts shown in
Table 3-5 should be sufficient.
Table 3-5. Comparison of Font Types.
Font Type
TrueType
Monotext
Lucida Console
Proportional
Arial
Slanted
Filled
Arial Black
Symbology
Symbol
Monotext font. This font creates text characters that are evenly spaced.
Monotext font should be used where text fields need to be aligned such
as in schedules or, in some cases, title blocks.
Proportional font. This font creates text where the characters are
proportionally spaced. It is appropriate for general notes, labels, or title
blocks.
Slanted font. A slanted font is used where text needs to be easily distinguished from other text.
ERDC/ITL TR-12-X
Filled font. Filled fonts are used primarily for titles and on cover
sheets.
Symbology font. This font should be used in cases where Greek symbols are representations for technical information.
Text height
The NCS recommends that the minimum text height for plotted CAD files
is 3/32 in. (2.4 mm). However, to maintain legibility in half-size drawings,
most sites go no lower than 1/8 in. (3 mm) in text height for dimensions,
notes, callouts, table/schedule text, and general text on full size drawings.
Subtitles and titles shall be plotted equivalent to 3/16 in. (5 mm) and 1/4
in. (6 mm) lettering size, respectively. The text height and text width shall
be assigned equal number values. Line spacing shall be equal to one half of
the text height.
General text placement
Text shall never be placed over other text. Text shall not be placed over
feature lines, hatching, or patterning. If text is placed in a hatched or
patterned area, the hatching/patterning shall be clipped so the text can be
clearly read.
Text justification depends upon the type of text being placed. For example,
general numbered notes shall have upper left justification, elevation labels
appearing to the left of a feature shall have bottom right justification, and
elevation labels appearing to the right of a feature shall have bottom left
justification. (Note: In MicroStation, text shall be placed using text nodes
when more than one line of text is placed. Text node justification shall be
set so that moving the node will not be required or will be minimal should
the text require future editing.)
Abbreviations
Abbreviations for words or phrases frequently used in plans, sections,
elevations, or details should follow the abbreviations as established in the
NCS (UDS Module 5 Terms and Abbreviations). When possible, the use
of abbreviations should be kept to a minimum. Other abbreviations,
particularly discipline-unique abbreviations, may be used but must not
conflict with those established in the NCS.
30
ERDC/ITL TR-12-X
31
Border Sheets
Sheet sizes
Typical A/E/C projects (contract documents) will be prepared on ANSI D
sheets (ANSI E may be used for large maps (i.e., installation master plans
and drawings for civil works projects)). For international projects, ISO A1
sheets are to be used (ISO A0 may be used for large maps). Other industry
standard sizes may be used depending on specific customer requirements.
Table 3-6 lists the standard sizes of all sheets.
Table 3-6. ANSI, Architectural, and ISO Sheet Size Comparison.
ANSI
Architectural
ISO
Mark
Size in inches
Mark
Size in inches
Mark
28.0 x 40.0
30.0 x 42.0
NA
NA
34.0 x 44.0
36.0 x 48.0
A0
22.0 x 34.0
24.0 x 36.0
A1
17.0 x 22.0
18.0 x 24.0
A2
11.0 x 17.0
12.0 x 18.0
A3
8.5 x 11.0
9.0 x 12.0
A4
To develop the graphics for the sheet border, the following minimum sheet
margin (defined by the NCS as the space between the edge of the sheet
and the sheet area) guidelines are to be used:
Title block
The Center recommends the use of a vertical title block placed in the
right-hand margin of the border sheet as shown in Figure 3-1. Use of the
vertical title block provides the most usable drawing space on a sheet. The
vertical title block also ensures that the most prevalent and pertinent
information remains at the bottom right of the sheet. In compliance with
the NCS (UDS Module 2Sheet Organization), title block data will include
the following:
ERDC/ITL TR-12-X
32
Note: Local standards may modify the content of the title block but
should not alter its size or configuration if possible. See the NCS for
additional recommendations.
Designer identification block. The designer identification block
(Figure 3-2) contains the logo or name of the agency that designed the
sheet. This space could also be expanded by reducing the size of the issue
block to accommodate professional seals when required.
Issue block. The issue block (Figure 3-3) contains a history of revisions,
addenda, and/or clarifications to the sheet. The first entry should be placed
on the lower left-hand line of the issue block and subsequent entries should
be made above it.
ERDC/ITL TR-12-X
33
ERDC/ITL TR-12-X
34
ERDC/ITL TR-12-X
35
The index map block (Figure 3-8) contains additional signatures not found
in the designer identification block (e.g., Chief of Real Estate Division,
Chief of Cadastral Section, etc.). Also, a specific Real Estate drawing
number may be included in this block.
ERDC/ITL TR-12-X
36
ERDC/ITL TR-12-X
37
Drawing Scales
Typical drawing scales for both inch-pound and SI measurements are
indicated in Table 3-7. Table 3-8 lists recommended text sizes for common
inch-pound scales, as well as line type scale factors for those scales. Table 3-9
lists recommended text sizes for common metric scales. (Note: The scales
shown are not all-inclusive. Scales used should be limited to those commonly
found on hand-held architectural, mechanical, and engineering scales.)
Dimensioning
As far as the appearance of dimensions, the NCS is very specific.
Dimension text heights (see Text height, p.29) should match the size of
the text in the rest of the drawing (i.e., notes and callouts) and the location
of the dimension text should be at the midpoint and top of the dimension
line (where possible). Dimension lines should be offset a minimum of
9/16 in. (14.5 mm) and extension lines should be offset a minimum of
1/16 in. (1.5 mm) from the element being dimensioned. Slashes or filled
arrowheads are allowed by the NCS for dimension terminators. Filled
arrowhead terminators should have an arrowhead width of 1.5 * TH (TH =
dimension text height) and a height of 0.5 * TH (Figure 3-9). This achieves
the NCS requirement of 3:1 filled arrowheads. Dimension terminator
selection should be consistent across the entire set of drawings. Color and
line width settings for dimensions should follow those shown in
Figure 3-10 and Table 3-10.
ERDC/ITL TR-12-X
38
Inch-Pound
Metric
1" = 20'
1:200
1" = 30'
1:400
1" = 40'
1:500
1" = 50'
1:600
1" = 60'
1:700
1" = 100'
1:1000
1" = 200'
1:2000
1" = 400'
1:5000
1" = 500'
1:6000
1" = 1000'
1:10000
1" = 2000'
1:20000
1:50
1:100
-----
1:200
1:200
1:100
-----
1:200
1:50
1:100
1:50
1:100
-----
1:200
Wall sections
1:20
Stair details
1:10
1:5
1:10
Site Plans
Floor Plan
Roof Plan
Exterior elevations
Interior Elevations
Cross sections
Details
ERDC/ITL TR-12-X
39
Text Size
0.125"
6 = 1-0
0.25
0.50"
1"
1.5"
12
2"
16
3"
24
4"
32
6"
48
8"
64
12"
96
16"
128
24"
192
48"
384
1" = 5'
7.5"
60
1" = 10'
1.25
120
1" = 20'
2.5
240
1" = 30'
3.75
360
1" = 40'
480
1" = 50'
6.25
600
1" = 60'
7.5
720
1" = 100'
12.5
1200
1" = 200'
25
2400
1" = 400'
50
4800
1" = 500'
62.5
6000
1" = 1000'
125
12000
1" = 2000'
250
24000
ERDC/ITL TR-12-X
40
Text Size
3 mm
1:2.5
7.5 mm
2.5
1:5
15 mm
1:10
30 mm
10
1:20
60 mm
20
1:30
90 mm
30
1:40
120 mm
40
1:50
150 mm
50
1:60
180 mm
60
1:100
300 mm
100
1:200
600 mm
200
1:400
1.2 m
400
1:500
1.5 m
500
1:600
1.8 m
600
1:700
2.1 m
700
1:1000
3.0 m
1000
1:2000
6.0 m
2000
1:5000
15 m
5000
1:6000
18 m
6000
1:10000
30 m
10000
1:20000
60 m
20000
Millimeters
The preferred unit of measure for most A/E/C work is millimeters. Unit
notations are unnecessary and should not be used. The dimension is
provided as a whole number as shown in Figure 3-11. Also, a note should
be added to the drawing stating, All dimensions and/or dimensions
shown in callouts/notes are in millimeters unless otherwise noted.
When meter measurements are included on the same sheet, the meter
dimension is provided as a real number taken to three places past the
decimal point (Figure 3-12). Again, unit notations are unnecessary.
Note: In circumstances where very small dimensions are used (e.g.,
machine details), it is permissible to use real numbers for millimeter
dimensions. A note should be placed on the detail regarding this fact.
ERDC/ITL TR-12-X
41
Meters
For site plans or other drawings drawn to scales over 1:200, the unit of
measure is typically meters. Where greater accuracy is required, show
dimensions to three decimal places (Figure 3-12). A note should be added
to the drawing stating, All dimensions and/or dimensions shown in
callouts/notes are in meters unless otherwise noted.
Large units of measure
Commas shall not be used when providing large units of measure; instead,
a space replaces the traditional comma in numbers containing five or more
digits (e.g., the number 45,000 is displayed as 45 000). In numbers
containing four digits, no space is necessary (e.g., 5000). These methods
are shown in Figures 3-13 and 3-14.
Note: The automatic dimensioning features of AutoCAD do not allow
users to replace commas with spaces in dimension text. The dimension
text will presently have to be edited to provide the spacing required by
ASTM E 621-94 (ASTM 1999).
ERDC/ITL TR-12-X
42
Dimension Element
Recommended Color
Dimension Text
0.35
Yellow
Terminators
0.35
Red
Extension Lines
0.25
Red
Dimension Lines
0.25
Red
ERDC/ITL TR-12-X
43
Figure 3-12. Dimension in meters. Always shown as a real number (with decimal).
Figure 3-13. Proper dimension presentations for metric measurements with four or
fewer digits.
Figure 3-14. Proper dimension presentations for metric measurements with five or
more digits.
Dual units
To avoid confusion, dual units (both inch-pound and metric) should not be
used. As stated in Construction Metrication Council (1998), the use of dual
units increases dimensioning time, doubles the chance for errors, makes
drawings more confusing, and only postpones the (metric) learning
process.
Exceptions to this include certain standard building designs where dual
dimensions ensure that the design can be used in either SI or inch-pound
projects and in situations where products/components used in an SI
project are available only as inch-pound products.
ERDC/ITL TR-12-X
44
Level/Layer Assignments
ERDC/ITL TR-12-X
45
ERDC/ITL TR-12-X
46
ERDC/ITL TR-12-X
height walls). An optional item to indicate Status or Phase can also be added
to every level/layer name (See Status (Phase) levels/layers later in this
chapter).
Model Files
As mentioned in Chapter 2, model files represent full-size drawings of
building elements, systems, or information (e.g., the mechanical HVAC
system, the architectural floor plan, details, or sections), and sheet files
represent final plotted sheets. Model files are used as components in creating plotted sheet files. The information contained within a model file for
a discipline may be referenced by other disciplines to create the particular
model files or sheet files for that discipline.
A model file can be considered a work in progress. For instance, a
mechanical engineer may reference the architects floor plan model file to
begin development of the HVAC ductwork layout model file. Meanwhile,
the architect can continue developing the floor plan to meet new requirements. Any changes to the floor plan would be immediately accessible to
the mechanical engineer. The viewing of real-time updates eliminates a
great deal of frustration for other disciplines because it allows for
on-the-spot rather than after-the-fact modifications.
Level/layer assignment tables
The level/layer assignment tables in Appendix A present the following
(Figure 4-4 presents an excerpt):
47
ERDC/ITL TR-12-X
48
ERDC/ITL TR-12-X
49
**ANNO-SYMB
Miscellaneous symbols.
**ANNO-TEXT
Miscellaneous text and callouts with associated leaders.
**ANNO-RDME
Read-me information.
**ANNO-REFR
Reference files and raster attachments.
Status (Phase) levels/layers. In some cases, levels/layers may be
modified to show the status of a particular item in the drawing (e.g., to be
demolished, to be moved, future work, etc.). In these cases, levels/layers
may have a Status code appended to them as shown in Figure 4-3. See
Table 4-1 for the Status (Phase) codes.
Table 4-1. Status (Phase) Codes.
Code
Description
Abandoned
Existing to demolish
Existing to remain
Future work
Items to be moved
New work
Temporary work
Not in contract
1-9
Phase numbers
The use of the Status (Phase) code should be limited, since it can significantly increase the number of levels/layers in a model file. Most items
can be shown through referenced model files or changing the line style of
items. For instance, in a New Work model file, Existing to Remain items
can be shown through a screened reference file. Not in Contract items and
Future Items could be shown with a dashed line style. Therefore, it is up to
the user to determine whether the use of the Status (Phase) code in
level/layer names increases the readability of the model file.
ERDC/ITL TR-12-X
Sheet Files
Sheet files are the final project sheets that are ready to be plotted. A sheet
file contains sheet-specific information (e.g., north arrows, scales, section
cuts, title block information) in a sheet model (i.e., Paper Space for
AutoCAD users). A design model inside the sheet file contains the model
information assembled as it would be displayed on a sheet. This model
would have real-world spatial alignment and would be used as the primary
50
ERDC/ITL TR-12-X
51
Users should note that the first 15 levels/layers of the sheet file type for
every discipline are the same, with the exception that the Discipline Designator changes depending on the discipline for that sheet file type. The
unique function of these Annotation levels/layers is to contain sheetspecific information. These levels/layers are as follows with ** representing a Discipline Designator (e.g., A-, C-):
**ANNO-DIMS
Sheet-specific witness/extension lines, dimension terminators, and
dimension text.
ERDC/ITL TR-12-X
**ANNO-KEYN
Sheet-specific keynotes with associated leaders.
**ANNO-LEGN
Legends and symbol keys.
**ANNO-MATC
Matchlines.
**ANNO-NOTE
Sheet-specific notes and general remarks.
**ANNO-NPLT
Non-plotting graphic information.
**ANNO-PATT
Sheet-specific patterning and hatching (e.g., keyplan patterning).
**ANNO-RDME
Read-me information.
**ANNO-REDL
Redlines.
**ANNO-REFR
Reference files and raster attachments
**ANNO-REVC
Revision clouds.
**ANNO-REVS
Revision indicators and text.
**ANNO-SCHD
Schedules.
**ANNO-SYMB
Sheet-specific symbols (e.g., north arrow, scales).
52
ERDC/ITL TR-12-X
**ANNO-TEXT
Sheet-specific text and callouts with associated leaders.
Development of sheet files
As mentioned previously, referenced model files are used in the construction of sheet files. The user opens the sheet file type from Appendix B
that is appropriate to his/her discipline, then references existing model
files into a design model. This design model is used to generate the sheet
model for that file. At this point, information can be placed on the
annotation layers for the model that has been assembled.
For example, after the designer assembles the model files and creates the
sheet model as described previously in Chapter 2, the designer would have
to turn off levels/layers within each referenced model file to achieve the
desired sheet file. Design model-specific annotations can be placed in the
design model. When a border sheet and the design model are referenced
together to form the sheet model, the designer could then place sheetspecific annotations in the sheet model. Once the final sheet file is
achieved, the resulting file is saved (with all reference files attached).
53
ERDC/ITL TR-12-X
Standard Symbology
Introduction
A cell in MicroStation and a block in AutoCAD are groups of graphical
elements that can be manipulated as a single entity. Examples of typical
cells/blocks are windows, doors, graphic scale keys, furniture, etc. The use
of such symbology enhances CAD productivity and provides an excellent
opportunity for CAD standardization.
Note: Even though the symbols are provided in cell libraries, for MicroStation a cell library is nothing more than a specialized design file with
an individual model for each symbol. The extension .cel is simply used to
differentiate a cell library from a standard design (.dgn) file.
Line styles
Line style definitions determine the particular dash-dot sequence and
relative length of dashes, blank spaces, and the characteristics of any
included text or shapes. Working with line styles provides a means of distinguishing the purpose of one line from another.
AutoCAD and MicroStation both provide a set of standard line styles, as
well as allowing the user to define custom line styles. In AutoCAD these
custom line styles are defined in a line type library file (.lin) and a
54
ERDC/ITL TR-12-X
multiline library file (.mln). In MicroStation, custom line styles are contained in resource files (.rsc) (see Chapter 3, Line types/styles for more
information.
Note: Custom line styles do not readily translate between systems;
therefore, users should anticipate that translated custom line styles may
revert into their primitive graphics.
55
ERDC/ITL TR-12-X
References
Air Force Logistics Command. 1989. Architectural and engineering services for CADD
implementation within Air Force Logistics Command.
American Institute of Architects. 2000. Architectural graphic standards. 10th ed. New
York: John Wiley and Sons.
American National Standards Institute. 1972. Graphic symbols for electrical wiring and
layout diagrams used in architect and building construction. ANSI Y32.9-1972,
Institute of Electrical and Electronics Engineers, New York.
American Society for Testing and Materials. 1999 (withdrawn 2008). Standard practice
for the use of metric (SI) units in building design and construction (Committee E6 Supplement to E380). ASTM E 621-94. Philadelphia, PA.
American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. 1997.
1997 ASHRAE fundamentals handbook. Atlanta, GA.
American Society of Mechanical Engineers. 1995. Decimal inch drawing sheet size and
format. ASME Y14.1-1995. New York.
_____. 1995. Metric drawing sheet size and format. ASME Y14.1M-1995. New York.
American Society of Plumbing Engineers. 1998. Data book Volume 1: Fundamentals of
plumbing engineering. Chicago, IL.
Construction Metrication Council. 1998. Construction metrication. Vol 7, Issue 1.
Washington, DC: National Institute of Building Sciences.
Department of Commerce/Department of Defense. 1997. United States of America
nautical chart symbols, abbreviations, and terms. 10th ed. Washington, DC:
Department of Commerce.
Headquarters, U.S. Army Corps of Engineers. 1990. Standards manual for U.S. Army
Corps of Engineers Computer-Aided Design and Drafting (CADD) systems.
Engineer Manual 1110-1-1807. Washington, DC.
International Organization for Standardization. 1982. Technical drawings General
principles of presentation. ISO 128. Switzerland.
_____. 1998. Technical product documentation - Organization and naming of layers for
CAD - Part 2: Concepts, format and codes used in construction documentation.
ISO 13567-2. Switzerland.
National Fire Protection Association. 2006. Standard for fire safety and emergency
symbols. NFPA 170. Quincy, MA.
National Institute of Building Sciences. 2011. United States National CAD Standard.
Washington, DC.
56
ERDC/ITL TR-12-X
Naval Facilities Engineering Command. 1993. Policy and procedures for electronic
deliverables of facilities computer-aided design and drafting (CADD) systems.
MIL-HNDBK-1006/7. Alexandria, VA.
Sheet Metal and Air Conditioning Contractors National Association. 1995. HVAC duct
construction standards-metal and flexible. 2nd ed. Chantilly, VA.
57
Appendix A
Model File Level/Layer Assignment
Tables
This appendix provides the model file level/layer assignment tables:
General ............................................................ A3
Hazardous Materials ....................................... A4
Survey/Mapping.............................................. A6
Geotechnical ................................................. A19
Civil .............................................................. A23
Landscape ..................................................... A33
Structural ....................................................... A34
Architectural ................................................. A41
Interiors ......................................................... A44
Fire Protection............................................... A46
Plumbing ....................................................... A48
Mechanical .................................................... A50
Electrical ....................................................... A56
Telecommunications ..................................... A60
A1
Discipline: General
Model File Layers/Levels
Graphic Defaults
V
113
6
2
5
8
5
NA
6
V
V
5
V
16
5
4
1
9
1
NA
5
V
V
1
0
0
7
0
0.25
0.25
0.18
0.25
7
7
5
1
0
0
1
3
X
X
X
X
0.35
0
0
3
0
0.25
0.25
0.25
0.25
2
2
2
2
4
4
4
4
0.35
Key Plan
MicroStation Color #
V
0.18
0.70
0.35
0.18
0.18
0.18
NA
0.35
V
V
0.18
Cover Sheet
AutoCAD Color #
0
0
0
0
0
V
0
NA
V
0
V
7
Border Sheet
AIA Format
Level/Layer Description
General Information
G-ANNO-KEYN
Reference keynotes with associated leaders
G-ANNO-MASK
Text/shape mask for use with photo backgrounds
G-ANNO-MATC
Match lines
G-ANNO-NOTE
General notes and general remarks
G-ANNO-NPLT
Non-plotting graphic information
G-ANNO-PATT
Patterning, poche, shading, and hatching
G-ANNO-RDME
Read-me information
G-ANNO-REFR
Reference files and raster attachments
Miscellaneous symbols
G-ANNO-SYMB
Miscellaneous text
G-ANNO-TEXT
Border and titleblock linework
G-ANNO-TTLB
G-ANNO-TTLB-GRID Grid lines inside border
Grid Lines
G-GRID-COOR
X-Y coordinate grid lines
G-GRID-COOR-IDEN X-Y coordinate grid lines annotation
G-GRID-EXTR
Column grid outside building
G-GRID-IDEN
Column grid tags
Floor Information
G-PLAN-OTLN
Floor outline/perimeter/building footprint
Coordinate Information
G-COOR-LALO
Latitude/longitude coordinate grid ticks
G-COOR-LALO-IDEN Latitude/longitude coordinate text
G-COOR-STAT
State plane coordinate grid ticks
G-COOR-STAT-IDEN State plane coordinate text
Site Information
G-SITE-OTLN
Site plan - key map
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A3
AutoCAD Color #
MicroStation Color #
Sections
Details
AIA Format
General Information
H-ANNO-DIMS
H-ANNO-KEYN
H-ANNO-NOTE
H-ANNO-NPLT
H-ANNO-PATT
H-ANNO-RDME
H-ANNO-REFR
H-ANNO-SYMB
H-ANNO-TEXT
Abatement
H-ABAT-BARR
H-ABAT-BARR-STRC
H-ABAT-POLY
Buildings
H-BLDG-IDEN
H-BLDG-OTLN
Decontamination
H-DECN-EQPM
H-DECN-IDEN
Disposal Areas
H-DISP-HAZW
H-DISP-IDEN
H-DISP-MUNT
H-DISP-TANK
Emergency Fixtures
H-FIXT-EYEW
H-FIXT-SHWR
Monitoring Stations
H-MNST-AIRQ
H-MNST-GWTR
H-MNST-IDEN
H-MNST-LAND
H-MNST-SOIL
H-MNST-SWTR
Pollution Areas
H-POLL-CONC
H-POLL-IDEN
H-POLL-ORIG
H-POLL-POTN
Sample Points
H-SAMP-AIRS
H-SAMP-BIOL
H-SAMP-BLDG
H-SAMP-GWTR
H-SAMP-IDEN
H-SAMP-MAGN
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
V
0
NA
V
0
V
V
0.35
0.18
0.18
0.18
NA
V
V
V
V
2
5
8
5
NA
6
V
V
V
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Tape barrier
Critical structural barriers
Polyethylene sheeting
0
0
2
0.50
0.35
0.50
2
5
3
4
1
2
X
X
X
Annotation
Command posts, information centers
0
0
0.35
0.35
2
2
4
4
X
X
Decontamination equipment
Annotation
0
0
0.25
0.35
1
6
3
5
X
X
Hazardous waste
Annotation
Munitions
Spill containment tanks
0
0
0
0
0.18
0.35
0.18
0.35
5
6
5
6
1
5
1
5
X
X
X
X
Emergency eyewashes
Emergency showers
0
0
0.25
0.25
3
3
2
2
X
X
Air quality
Ground water
Annotation
Landfill gas
Soil gas
Surface water
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
3
3
3
3
3
3
2
2
2
2
2
2
X
X
X
X
X
X
0
0
0
0
0.35
0.35
0.35
0.35
2
2
2
2
4
4
4
4
X
X
X
X
Air samples
Biological samples
Building material samples (e.g., asbestos, lead, PCBs, etc.)
Ground water samples
Annotation
Magnetometer location points
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
1
1
1
1
1
1
3
3
3
3
3
3
X
X
X
X
X
X
Level/Layer Description
Witness/extension lines, dimension terminators, dimension text
Reference keynotes with associated leaders
General notes and general remarks
Non-plotting graphic information
Patterning, poche, shading, and hatching
Read-me information
Reference files and raster attachments
Miscellaneous symbols
Miscellaneous text and callouts with associated leaders
A4
0.25
0.25
0.25
0.25
0.25
1
1
1
1
1
3
3
3
3
3
X
X
X
X
X
Hazardous materials
Hazardous waste
Annotation
0
0
0
0.35
0.35
0.35
6
6
6
5
5
5
X
X
X
Injection well
Extraction well
0
0
0.25
0.25
5
5
1
1
X
X
0
0
0
0
0.35
0.18
0.50
0.18
2
5
4
8
4
1
7
9
Details
MicroStation Color #
0
0
0
0
0
Level/Layer Description
Sediment samples
Soil samples
Solid material samples
Surface water samples
Waste samples
Sections
AutoCAD Color #
AIA Format
H-SAMP-SEDI
H-SAMP-SOIL
H-SAMP-SOLI
H-SAMP-SWTR
H-SAMP-WAST
Storage Facilities
H-STOR-HAZM
H-STOR-HAZW
H-STOR-IDEN
Wells
H-WELL-INJN
H-WELL-XTRA
Sections
H-SECT-IDEN
H-SECT-MBND
H-SECT-MCUT
H-SECT-PATT
Detail Information
H-DETL-GRPH
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
A5
Discipline: Survey/Mapping
Model File Layers/Levels
Property Boundary
Existing Profiles
Existing X-Sections
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
V-ANNO-DIMS
V-ANNO-KEYN
V-ANNO-MASK
V-ANNO-NOTE
V-ANNO-NPLT
V-ANNO-PATT
V-ANNO-RDME
V-ANNO-REFR
V-ANNO-SYMB
V-ANNO-TEXT
Aerial Survey
V-AERI-BNDY
V-AERI-BNDY-NEAT
V-AERI-FLYS
V-AERI-IDEN
V-AERI-INDX
V-AERI-PATH
V-AERI-PHOT
V-AERI-PNPT
Airfields
V-AFLD-BCNS-IDEN
V-AFLD-BCNS-MISC
V-AFLD-BCNS-STRB
V-AFLD-CIRC-CTRL
V-AFLD-CIRC-IDEN
V-AFLD-CIRC-MULT
V-AFLD-CIRC-SERS
V-AFLD-DEVC
V-AFLD-DBNK
V-AFLD-IDEN
V-AFLD-JBOX
V-AFLD-LITE-APPR
V-AFLD-LITE-DIST
V-AFLD-LITE-LANE
V-AFLD-LITE-OBST
V-AFLD-LITE-RUNW
V-AFLD-LITE-SIGN
V-AFLD-LITE-TAXI
V-AFLD-LITE-THRS
V-AFLD-VALT
Alignments
V-ALGN-DATA
V-ALGN-LINE
V-ALGN-MAJR
V-ALGN-MARK
V-ALGN-MINR
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
V
0
NA
V
0
V
V
0.18
0.35
0.18
0.18
0.18
NA
V
V
V
V
113
2
5
8
5
NA
6
V
V
V
16
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
6
0
0
0.35
0.35
0.35
0.35
0.70
0.35
0.35
0.35
6
2
6
2
7
22
22
6
5
4
5
4
0
22
22
5
X
X
X
X
X
X
X
X
0
0
0
0
0
0
0
0
EUDUCX
0
0
0
0
0
0
0
0
0
0
0
0.25
0.35
0.35
0.35
0.25
0.35
0.35
0.35
0.25
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
203
203
203
163
2
23
203
23
83
2
23
203
203
203
203
203
203
203
203
203
45
45
45
41
4
46
45
46
42
4
46
45
45
45
45
45
45
45
45
45
0
4
0
0
0
0.25
0.25
0.25
0.25
0.18
3
2
1
3
6
2
4
3
2
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A6
Discipline: Survey/Mapping
Model File Layers/Levels
0.18
0.25
0.25
0.18
0.25
0.25
0.35
0.35
0.18
0.25
0.25
1
2
2
1
2
2
4
4
1
2
2
3
4
4
3
4
4
7
7
3
4
4
X
X
X
X
X
X
X
X
X
X
X
0
2
6
7
0
0
0
0
2
0
3
0
0.18
0.25
0.25
0.18
0.35
0.25
0.18
0.18
0.25
0.18
0.35
0.18
6
5
22
5
4
2
2
7
22
6
5
7
5
1
22
1
7
4
4
0
22
5
1
0
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
0
0.35
0.35
0.50
0.25
0.35
0.35
4
4
7
2
4
4
7
7
0
4
7
7
X
X
X
X
X
X
0
0
0
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
6
6
6
6
6
6
6
6
6
6
6
5
5
5
5
5
5
5
5
5
5
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
7
0
0
0
0
0
0
0
0
0
0
X
X
X
Existing Profiles
X
X
X
X
X
X
2
5
4
3
6
2
0.25
0.25
0.25
MicroStation Color #
0
0
0
Property Boundary
AutoCAD Color #
AIA Format
Level/Layer Description
V-ALGN-STAT
Alignment stationing
V-ALGN-SYMB
Alignment symbols (PIs)
V-ALGN-TEXT
Alignment text, annotation with associated leaders
Aprons
Apron centerlines
V-APRN-CNTR
V-APRN-CNTR-IDEN Apron centerline annotation
V-APRN-GRND
Grounding points
V-APRN-HOLD
Holding position markings
V-APRN-IDEN
Airfield apron - annotation
V-APRN-MOOR
Mooring points
V-APRN-MRKG
Apron markings
V-APRN-OTLN
Airfield apron - outlines
V-APRN-SECU
Security zone markings
V-APRN-SHLD
Shoulders with annotation
V-APRN-SHLD-MRKG Shoulder stripes
Beach Renourishment
V-BECH-BANK-TOP~ Beach top of bank
V-BECH-BKLN
Beach breakline
V-BECH-BNCH
Beach bench
V-BECH-CNTR
Beach centerline
V-BECH-LIMT
Beach limit lines
V-BECH-OHWM
Ordinary high water marks
V-BECH-OTLN
Beach outline
V-BECH-SLOP-IDEN Beach slope indicator with annotation
V-BECH-SLOP-TOP~ Beach top of slope
V-BECH-SYMB
Beach symbols
V-BECH-TOE~
Beach toe
V-BECH-TOE~-IDEN Beach toe annotation
Buildings and Primary Structures
V-BLDG-DECK
Outdoor decks (attached, no roof overhead)
V-BLDG-DOCK
Loading docks
V-BLDG-FTPT
Building footprints
V-BLDG-IDEN
Building and other stucture annotation
V-BLDG-OVHD
Building overhangs
V-BLDG-PRCH
Porches (attached, roof overhead)
Borings
V-BORE-GENL-LOCN General boring X,Y location marker
V-BORE-GENL-NAME General boring name
V-BORE-GENL-NOTE General boring notes
V-BORE-GPRO-LOCN GeoProbe X,Y location marker
V-BORE-GPRO-NAME GeoProbe boring name
V-BORE-GPRO-NOTE GeoProbe boring notes
V-BORE-UNDS-LOCN Undisturbed boring X,Y location marker
V-BORE-UNDS-NAME Undisturbed boring name
V-BORE-UNDS-NOTE Undisturbed boring notes
V-BORE-VCOR-LOCN Vibra-Core X,Y location marker
V-BORE-VCOR-NAME Vibra-Core name
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A7
Discipline: Survey/Mapping
Model File Layers/Levels
0.25
0.25
2
2
4
4
X
X
X
X
0
7
0
0
0
0
0
0.35
0.18
0.18
0.35
0.25
0.35
0.18
4
1
4
4
2
4
4
7
3
7
7
4
7
7
X
X
X
X
X
X
0
0
0
0
0.35
0.35
0.25
0.35
83
83
83
83
42
42
42
42
0
0
0
0
7
0
0
0
0
0
0
0
0
0
0
0
3
0
0
3
0.25
0.25
0.25
0.25
0.18
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.35
0.25
0.25
0.35
0.25
0.25
0.35
2
2
2
6
5
5
3
3
6
6
6
2
2
4
6
2
5
6
2
4
4
4
4
5
1
1
2
2
5
5
5
4
4
7
5
4
1
5
4
7
0
0
0
COMARX
0
0
0
0
0.35
0.35
0.35
0.35
0.25
0.35
0.35
0.25
23
23
23
4
4
203
203
203
46
46
46
7
7
45
45
45
Existing X-Sections
0
2
Existing Profiles
0.35
MicroStation Color #
Property Boundary
AutoCAD Color #
AIA Format
Level/Layer Description
V-BORE-VCOR-NOTE Vibra-Core notes
Borrow Areas
V-BORW-IDEN
Borrow/spoil area annotation
V-BORW-LINE
Borrow/spoil area
Bridges
V-BRDG-CHRD-LOW~ Low chord
V-BRDG-CNTR
Bridge centerlines
V-BRDG-CTLJ
Control joints
V-BRDG-DECK
Bridge deck
V-BRDG-IDEN
Bridge annotation
V-BRDG-OTLN
Bridge outlines
Bridge railing
V-BRDG-RLG~
Cathodic Protection System
V-CATH-ANOD
Sacrificial anode system
V-CATH-CURR
Impress current system
V-CATH-IDEN
Identifier tags, symbol modifier, and text
V-CATH-TEST
Test stations
Channels
V-CHAN-BANK-IDEN Channel/canal top of bank annotation
V-CHAN-BANK-TOP~ Channel/canal top of bank
V-CHAN-BNCH
Channel/canal bench design feature lines (breaklines form DTMs)
V-CHAN-BWTR
Breakwaters
V-CHAN-CNTR
Channel centerline and survey report lines
V-CHAN-CNTR-IDEN Channel centerline and survey report lines - annotation
V-CHAN-DACL
De-authorized channel limits, anchorages, etc.
V-CHAN-DACL-IDEN De-authorized channel limits, anchorages, etc. - annotation
V-CHAN-DOCK
Docks, decks, floats, piers, and mooring facilities
V-CHAN-LIMT
Channel limits, anchorages, turning basins, disposal areas, etc.
V-CHAN-LIMT-IDEN Channel limits, anchorages, turning basins, disposal areas, etc. - annotation
V-CHAN-NAID
Navigation aids and text
V-CHAN-SLOP-LINE Channel cut/fill slope (Indicates cut and fill lines)
V-CHAN-SPOL
Spoil limits
V-CHAN-SYMB
Channel/canal symbols
V-CHAN-TEXT
Channel/canal text, annotation with associated leaders
V-CHAN-TOE~
Channel/canal toe
V-CHAN-TOE~-IDEN Channel/canal toe annotation
V-CHAN-TURN
Turning points
V-CHAN-WIDE
Channel/canal widener
Communications
V-COMM-EQPM
Other communications distribution equipment
Communication junction boxes, pull boxes, handholes, pedestals, and splices
V-COMM-JBOX
Manholes
V-COMM-MHOL
V-COMM-OVHD
Overhead communications/telephone lines
V-COMM-OVHD-IDEN Identifier tags, symbol modifier and text
V-COMM-POLE
Poles
V-COMM-POLE-GUYS Guying equipment
V-COMM-POLE-IDEN Identifier tags, symbol modifiers, and text
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A8
Discipline: Survey/Mapping
Model File Layers/Levels
0.35
0.25
0.35
0.35
0.35
0.35
0.35
6
3
6
6
2
6
6
5
2
5
5
4
5
5
0
FIRE
0
0
0
WATRX
0
0
NONPOT
0
0
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
6
1
6
1
2
6
3
1
6
3
3
6
1
6
6
1
1
5
3
5
3
4
5
2
3
5
2
2
5
3
5
5
3
3
6, DITCH
7
0
0
0
0.18
0.18
0.18
0.25
0.18
5
5
4
3
3
1
1
7
2
2
X
X
X
X
X
EUDUCX 0.35
0
0.25
83
83
42
42
X
X
0.35
0.35
0.25
0.25
0.25
0.35
0.35
4
4
6
6
2
4
4
7
7
5
5
4
7
7
X
X
X
X
X
X
X
0.25
Existing Profiles
Existing X-Sections
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
2
0
0
0
0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
0
0
X
X
X
X
7
7
Property Boundary
4
4
MicroStation Color #
COMUGX 0.35
0
0.25
AutoCAD Color #
AIA Format
Level/Layer Description
V-COMM-UGND
Underground communications/telephone lines
V-COMM-UGND-IDEN Identifier tags, symbol modifier and text
Control Points
V-CTRL-BMRK
Benchmarks
V-CTRL-GRID
Grid
V-CTRL-HORZ
Horizontal control points
V-CTRL-HVPT
Horizontal/vertical control points
V-CTRL-IDEN
Control point annotation
V-CTRL-TRAV
Transverse points
V-CTRL-VERT
Vertical control points
Domestic Water
Connectors, faucets, reducers, regulators, vents, intake points, taps, backflow preventers, and valves
V-DOMW-DEVC
V-DOMW-FIRE
Fire lines
V-DOMW-FTTG
Caps, cleanouts, crosses, and tees
V-DOMW-HYDT
Hydrants
V-DOMW-IDEN
Identifier tags, symbol modifier, and text
V-DOMW-MAIN-PIPE Main domestic water piping
V-DOMW-METR
Meters
V-DOMW-NPW~-HYDT Non-potable hydrants/flushing hydrants
V-DOMW-NPW~-PIPE Non-potable water piping
V-DOMW-PITS-VENT Vent pits
V-DOMW-PITS-VALV Valve pits/vaults
V-DOMW-SERV-PIPE Domestic water service piping
V-DOMW-SIGN
Surface markers/signs
V-DOMW-STNS-PUMP Booster pump stations
V-DOMW-STNS-REDC Pressure reducing stations
V-DOMW-TANK
Water storage tanks
V-DOMW-WELL
Water well houses
Ditches or Washes
V-DTCH-BOTM
Bottom of ditch or wash
V-DTCH-CNTR
Centerline of ditch or wash
V-DTCH-EWAT
Edge of water
V-DTCH-IDEN
Ditches and washes annotation
V-DTCH-TOP~
Top of ditch or wash
Underground Ductbanks (to be used when multiple systems are in one ductbank system)
V-DBNK-MULT
Ductbank
V-DBNK-MULT-IDEN Identifier tags, symbol modifier and text
Habitats/Landforms
V-ECCO-BURR
Burrow
V-ECCO-DENS
Den
V-ECCO-GATR
Gator hole
V-ECCO-HUMK
Hummocks
V-ECCO-IDEN
Habitat annotation
V-ECCO-NEST
Nest, nesting tree
V-ECCO-PRCH
Perch/nesting hole
Flood Hazard Area
25 year mark
V-FLHA-025Y
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A9
Discipline: Survey/Mapping
Model File Layers/Levels
0
0
7
0
0
0
0
0
0
0
0
0.35
0.25
0.18
0.25
0.25
0.25
0.35
0.25
0.25
0.35
0.25
20
20
20
20
6
6
22
22
4
2
20
6
6
6
6
5
5
22
22
7
4
6
X
X
X
X
X
X
X
X
X
X
X
0
0
0.25
0.25
6
6
5
5
X
X
0.25
0
0
0
0
LIQPET
0
0
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
6
6
2
1
6
3
3
3
3
6
6
3
3
5
5
4
3
5
2
2
2
2
5
5
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
0
3
2
4
1
6
3
0
0
7
0.35
0.35
0.18
0.18
0.18
0.18
0.18
0.25
0.35
0.35
2
6
22
6
2
3
113
2
2
5
4
5
22
5
4
2
16
4
4
1
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
X
X
X
X
X
Existing Profiles
4
5
4
5
4
2
6
2
6
2
0.25
0.25
0.25
0.25
0.25
3
0
2
7
0
Level/Layer Description
50 year mark
100 year mark
200 year mark
500 year mark
Flood hazard area annotation
Property Boundary
MicroStation Color #
AutoCAD Color #
V-FUEL-DEVC
V-FUEL-FLOW
V-FUEL-FTTG
V-FUEL-IDEN
V-FUEL-JBOX
V-FUEL-MAIN-PIPE
V-FUEL-METR
V-FUEL-PITS-HYDT
V-FUEL-PITS-VENT
V-FUEL-PITS-VALV
V-FUEL-SERV-PIPE
V-FUEL-STNS-PUMP
V-FUEL-TANK
V-FUEL-TRCH
Grade Linework
V-GRAD-AFTR
V-GRAD-EXST
V-GRAD-EXST-BASE
V-GRAD-EXST-SYR1
V-GRAD-EXST-SYR2
V-GRAD-EXST-SYR3
V-GRAD-EXST-SYR4
V-GRAD-IDEN
V-GRAD-PRED
V-GRAD-SCLN
Grid Lines
AIA Format
V-FLHA-050Y
V-FLHA-100Y
V-FLHA-200Y
V-FLHA-500Y
V-FLHA-IDEN
Floodwalls
V-FLOD-BASE
V-FLOD-BASE-IDEN
V-FLOD-CNTR
V-FLOD-CNTR-IDEN
V-FLOD-DRNS
V-FLOD-DRNS-IDEN
V-FLOD-PILE
V-FLOD-PILE-IDEN
V-FLOD-TOE~
V-FLOD-TOP~
V-FLOD-TOP~-IDEN
Liquid Fuel
V-FUEL-BERM
V-FUEL-DEFL-PIPE
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A10
Discipline: Survey/Mapping
Model File Layers/Levels
7
9
9
4
0
0
0
0
0.25
0.35
0.35
0.35
203
2
203
203
45
4
45
45
X
X
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.25
0.25
0.18
0.25
0.18
0.25
0.25
0.25
0.18
0.25
0.18
0.25
0.18
0.18
0.18
0.25
0.18
0.25
163
163
163
6
3
6
113
113
113
2
1
1
1
3
5
113
113
6
41
41
41
5
2
5
16
16
16
4
3
3
3
2
1
16
16
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
4
COMUGX
WATRX
EPUGX
LIQPET
NTGASX
SSWAFX
STRAFX
0
2
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.18
0.18
0.25
0.25
0.18
0.18
0.18
0.25
0.25
0.25
7
7
7
7
7
7
7
7
3
1
6
122
3
3
3
6
6
22
0
0
0
0
0
0
0
0
2
3
5
23
2
2
2
5
5
22
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
4
8
8
2
Existing Profiles
0.35
0.25
0.18
0.25
0
1
1
0
Property Boundary
MicroStation Color #
AutoCAD Color #
AIA Format
Level/Layer Description
V-GRID-FRAM
Frame
V-GRID-MAJR
Major grid lines
V-GRID-MINR
Minor grid lines
V-GRID-TEXT
Border text, annotation
Geothermal Heat Pump System
Geothermal heat pump system equipment
V-GTHP-EQPM
V-GTHP-IDEN
Geothermal heat pump annotation
V-GTHP-RETN-PIPE Geothermal heat pump system return piping
V-GTHP-SUPP-PIPE Geothermal heat pump system supply piping
High Temperature/Chilled Water System
V-HTCW-CWTR-MAIN Main chilled water piping
V-HTCW-CWTR-PLNT Chilled water plant
V-HTCW-CWTR-SERV Chilled water service piping
Rigid anchors, anchor guides, rectifiers, reducers, markers, meters, pumps, regulators, tanks, and
V-HTCW-DEVC
V-HTCW-FLOW
Flow direction arrows
V-HTCW-FTTG
Caps and flanges
V-HTCW-HWTR-MAIN Main high temperature piping
V-HTCW-HWTR-PLNT High temperature water plant
V-HTCW-HWTR-SERV High temperature service piping
V-HTCW-IDEN
Identifier tags, symbol modifier, and text
V-HTCW-JBOX
Junction boxes, manholes, handholes, test boxes
V-HTCW-LWTR-MAIN Main low temperature piping
V-HTCW-LWTR-SERV Low temperature service piping
V-HTCW-PITS
Valve pits/vaults, steam pits
V-HTCW-RETN-PIPE Return for all HTCW lines
V-HTCW-STEM-MAIN Main steam piping
V-HTCW-STEM-SERV Steam service piping
V-HTCW-STNS-PUMP Pump stations
Hydrosurveys
V-HYDS-BKLN
Breaklines
V-HYDS-BKLN-COMM Subsurface utilities communications breakline
V-HYDS-BKLN-DOMW Subsurface utilities water breakline
V-HYDS-BKLN-ELEC Subsurface utilities electric breakline
V-HYDS-BKLN-FUEL Subsurface utilities liquid fuel breakline
V-HYDS-BKLN-NGAS Subsurface utilities natural gas breakline
V-HYDS-BKLN-SSWR Subsurface utilities sanitary sewer breakline
V-HYDS-BKLN-STRM Subsurface utilities storm sewer breakline
V-HYDS-BNDY-EXTR Surface exterior boundary
V-HYDS-BNDY-INTR Surface interior boundary
V-HYDS-BORE
Boring locations and text
V-HYDS-COOR
Coordinate grid text annotation
V-HYDS-COOR-LALO Latitude and longitude grid ticks
V-HYDS-COOR-STAT State Plane coordinate ticks
V-HYDS-COOR-UTM~ UTM coordinate ticks
V-HYDS-DTMO
DTM obscure area boundary
V-HYDS-DTMP
DTM points
V-HYDS-DTMT
DTM triangles
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A11
Discipline: Survey/Mapping
Model File Layers/Levels
5
5
5
4
3
5
5
5
3
3
5
0
0
0
0
0.25
0.25
0.25
0.18
6
2
6
3
5
4
5
2
X
X
X
0
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
6
6
2
2
4
12
2
5
5
4
4
7
27
4
X
X
X
X
X
X
X
0
0
0
0
0
0
7
0.25
0.25
0.25
0.25
0.18
0.35
0.18
20
20
6
20
2
4
20
6
6
5
6
4
7
6
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
6
6
6
2
1
6
6
6
1
1
6
Existing Profiles
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0
0
0
0
0
0
IWASTE
0
0
0
0
X
X
X
4
4
2
2
2
3
7
4
4
5
V
4
3
V
2
2
3
3
3
1
4
2
2
6
V
2
1
V
X
X
0.25
0.25
0.18
0.18
0.18
0.18
0.25
0.25
0.25
0.25
0.18
0.25
0.18
0.35
X
X
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Property Boundary
X
X
X
X
X
MicroStation Color #
X
X
X
X
X
AutoCAD Color #
AIA Format
Level/Layer Description
V-HYDS-MAJR
Major contours
V-HYDS-MAJR-IDEN Major contours - annotation
V-HYDS-MINR
Minor contours
V-HYDS-MINR-IDEN Minor contours - annotation
V-HYDS-PERI
Surface perimeter
V-HYDS-SHAP
Inroads generated shapes/lines
V-HYDS-SHOR
Shorelines, land features, and references
V-HYDS-SLOP-FILL Cut/fill slopes
V-HYDS-SLOP-IDEN Cut/fill slope, top/toe slope annotation
V-HYDS-SLOP-TOPT Top/toe slopes
V-HYDS-SOUN
Soundings and overbanks
V-HYDS-SPOT
Spot elevations
V-HYDS-VOID
Surface void region
V-HYDS-WATR
Water level reference (e.g., LWRP, after-grading LWRP, SWP, etc.)
Industrial Waste Water
Grit chambers, meters, flumes, neutralizers, oil/water separators, ejectors, tanks, and valves
V-INDW-DEVC
V-INDW-FLOW
Flow direction arrows
V-INDW-FTTG
Caps and cleanouts
V-INDW-IDEN
Identifier tags, symbol modifier, and text
V-INDW-JBOX
Junction boxes and manholes
V-INDW-LAGN
Lagoons
V-INDW-MAIN-PIPE Main industrial waste water piping
V-INDW-PLNT
Treatment plants
V-INDW-SERV-PIPE Industrial waste water service piping
V-INDW-SIGN
Surface markers/signs
V-INDW-STNS-LIFT Lift stations
Irrigation
V-IRRG-EQPM
Irrigation equipment (e.g., controllers, valves, etc.)
V-IRRG-IDEN
Irrigation annotation
V-IRRG-PIPE
Irrigation piping
V-IRRG-WELL
Irrigation wells
Joints
Construction joints - longitudinal
V-JNTS-CNSL
V-JNTS-CNST
Construction joints - transverse
V-JNTS-CNTL
Contraction joints - longitudinal
V-JNTS-CNTT
Contraction joints - transverse
V-JNTS-EDGE
Thickened edges
V-JNTS-EXPJ
Expansion joints
V-JNTS-IDEN
Joint annotation
Levees
V-LEVE-BANK-IDEN Levee top of bank annotation
V-LEVE-TOPB
Levee top of bank
V-LEVE-BERM
Existing berms
V-LEVE-BNCH
Levee bench design feature lines (breaklines form DTMs)
V-LEVE-BNCH-IDEN Levee bench annotation
V-LEVE-BRRW
Borrow limits
V-LEVE-CNTR
Levee centerline
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A12
Discipline: Survey/Mapping
Model File Layers/Levels
203
203
45
45
Battle positions
Range cameras
Fox holes and pits
Moving army targets
Moving infantry targets
Moving infantry targets annotation
Pop up targets
Pop up targets annotation
Stationary army targets
Stationary army targets annotation
Stationary infantry targets
Stationary infantry targets annotation
0
0
0
0
0
0
0
0
0
0
0
0
0.35
0.25
0.25
0.35
0.35
0.25
0.35
0.25
0.35
0.25
0.35
0.25
4
6
6
4
4
2
4
2
4
2
4
2
7
5
5
7
7
4
7
4
7
4
7
4
0
0
0
0
0
0
NTGASX
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.18
6
6
6
2
3
6
6
3
3
1
6
6
3
5
5
5
4
2
5
5
2
2
3
5
5
2
Airspace obstructions
Airspace obstruction annotation
Underwater obstructions (e.g., sunken ship, barge, etc.)
Underwater obstruction annotation
0
0
2
0
0.25
0.25
0.25
0.25
3
2
1
2
2
4
3
4
Centerlines
Centerline annotation
Airfield overrun area - annotation
Airfield overrun area - outlines
7
0
0
0
0.18
0.25
0.25
0.25
1
2
2
4
3
4
4
7
Existing X-Sections
0.35
0.25
Existing Profiles
0
0
Exterior lights
Exterior light identifier tags, symbol modifiers, and text
X
X
X
X
X
X
X
6
4
7
4
4
6
6
20
2
4
2
2
20
20
0.25
0.25
0.35
0.25
0.25
0.25
0.18
Property Boundary
MicroStation Color #
0
0
0
0
0
2
0
Level/Layer Description
Levee centerline annotation
Levee annotation
Levee outline
Levee slope indicator with annotation
Levee stationing
Levee toe
Levee toe annotation
AutoCAD Color #
AIA Format
V-LEVE-CNTR-IDEN
V-LEVE-IDEN
V-LEVE-OTLN
V-LEVE-SLOP
V-LEVE-STAN
V-LEVE-TOE~
V-LEVE-TOE~-IDEN
Lights
V-LITE-EXTR
V-LITE-EXTR-IDEN
Military Ranges
V-MILR-BATP
V-MILR-CAMS
V-MILR-FOXH
V-MILR-MATS
V-MILR-MITS
V-MILR-MITS-IDEN
V-MILR-PUTS
V-MILR-PUTS-IDEN
V-MILR-SATS
V-MILR-SATS-IDEN
V-MILR-SITS
V-MILR-SITS-IDEN
Natural Gas
V-NGAS-EQPM
V-NGAS-FLOW
V-NGAS-FTTG
V-NGAS-IDEN
V-NGAS-INST
V-NGAS-MHOL
V-NGAS-PIPE
V-NGAS-PITS-VENT
V-NGAS-PITS-VALV
V-NGAS-SIGN
V-NGAS-STNS-PUMP
V-NGAS-STNS-REDC
V-NGAS-TANK
Obstructions
V-OBST-AIRS
V-OBST-AIRS-IDEN
V-OBST-UWTR
V-OBST-UWTR-IDEN
Overrun Areas
V-OVRN-CNTR
V-OVRN-CNTR-IDEN
V-OVRN-IDEN
V-OVRN-OTLN
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A13
Discipline: Survey/Mapping
Model File Layers/Levels
7
0
0
0
0
0.18
0.25
0.25
0.25
0.18
1
2
2
4
2
3
4
4
7
4
X
X
X
X
X
0
0
0
0
0
0
0
0
0
0
0.35
0.25
0.35
0.35
0.35
0.25
0.35
0.35
0.35
0.35
23
2
83
203
203
203
23
163
23
23
46
4
42
45
45
45
46
41
46
46
EPARX
0
EPUGX
0
0.35
0.25
0.35
0.25
4
4
4
4
7
0
0
0
0
0
0
0
0
0
0.18
0.18
0.25
0.25
0.25
0.18
0.25
0.25
0.35
0.25
0
CONEMT
0
PROPL
1
6
3
7
0
0
16THLN
4
0.35
0.50
0.25
0.35
0.35
0.50
0.18
0.35
0.25
0.25
0.35
0.35
X
X
7
7
7
7
X
X
X
X
X
X
X
X
1
1
3
1
91
1
6
2
4
2
3
3
2
3
106
3
5
4
7
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
6
7
6
2
6
7
7
6
6
1
6
6
5
0
5
4
5
0
0
5
5
3
5
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
0.25
Existing Profiles
Property Boundary
MicroStation Color #
AutoCAD Color #
AIA Format
Level/Layer Description
V-OVRN-SHLD-MRKG Shoulder markings
Pads (Arm/Disarm/Calibration, etc.)
Centerlines
V-PADS-CNTR
V-PADS-CNTR-IDEN Centerline annotation
V-PADS-IDEN
Pads - annotation
V-PADS-OTLN
Pad - outlines
V-PADS-SHLD
Shoulders with annotation
Power
Capacitors, voltage regulators, motors, buses, generators, meters, grounds, and markers
V-POWR-DEVC
V-POWR-IDEN
Power annotation
V-POWR-JBOX
Junction boxes, pull boxes, manholes, handholes, pedestals, splices
V-POWR-POLE
Power poles
V-POWR-POLE-GUYS Guying equipment
V-POWR-POLE-IDEN Identifier tags, symbol modifiers, and text
V-POWR-SBST
Substation equipment
Fuse cutouts, pole mounted switches, circuit breakers, gang operated disconnects, reclosers, cubicle
V-POWR-SWCH
V-POWR-XFMR-PADM Pad mounted transformers
V-POWR-XFMR-POLM Pole mounted transformers
Primary Electrical Cables
V-PRIM-OVHD
Overhead electrical utility lines
V-PRIM-OVHD-IDEN Identifier tags, symbol modifiers, and text
V-PRIM-UGND
Underground electrical utility lines
V-PRIM-UGND-IDEN Identifier tags, symbol modifiers, and text
Parking Lots
V-PRKG-CNTR
Parking lot centerlines
V-PRKG-CNTR-IDEN Parking lot centerline annotation
V-PRKG-CURB
Curbs and gutters
V-PRKG-DRAN
Drainage slope indications
V-PRKG-FIXT
Parking lot fixtures (e.g., wheel stops, parking meters)
V-PRKG-FLNE
Fire lanes
V-PRKG-IDEN
Parking lot annotation
V-PRKG-MRKG
Pavement markings
V-PRKG-OTLN
Parking lot outlines
V-PRKG-SIGN
Signs
Property
V-PROP-BRNG
Bearings and distance labels
V-PROP-ESMT
Easements
V-PROP-IDEN
Property annotation
V-PROP-LINE
Property lines (Existing recorded plats)
V-PROP-QTRS
Quarter lines
V-PROP-RWAY
Right of ways
V-PROP-SBCK
Setback lines
V-PROP-SECT
Section lines
V-PROP-SECT-IDEN Section lines annotation
V-PROP-SUBD
Subdivision (interior) lines
V-PROP-SXTS
Sixteenth lines (40 lines)
V-PROP-TSHP
Township/range lines
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A14
Discipline: Survey/Mapping
Model File Layers/Levels
9
9
9
4
4
9
X
X
X
X
X
X
7
0
0
0
RAILRD
0.18
0.25
0.25
0.25
0.25
1
1
91
2
2
3
3
106
4
4
X
X
X
X
X
0
7
0
0
0
0.25
0.18
0.35
0.25
0.25
5
1
5
2
5
1
3
1
4
1
X
X
X
X
X
0
7
0
0
0
GUARD
0
0
0
0
0
0
0
0
0.18
0.18
0.18
0.18
0.25
0.25
0.18
0.25
0.25
0.25
0.18
0.25
0.18
0.18
8
1
1
7
6
6
20
6
2
4
8
6
1
3
9
3
3
0
5
5
6
5
4
7
9
5
3
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
V
V
V
V
0.18
0.18
0.18
0.18
1
3
1
3
3
2
3
2
X
X
X
X
0
7
0
0
0
0
0.25
0.18
0.25
0.25
0.25
0.25
1
1
1
1
1
6
3
3
3
3
3
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
8
8
8
2
2
8
Existing Profiles
0.18
0.18
0.18
0.25
0.35
0.18
0
0
0
0
0
0
0.25
Property Boundary
MicroStation Color #
AutoCAD Color #
AIA Format
Level/Layer Description
V-PROP-TSHP-IDEN Township/range lines annotation
Pavements
Pavement pattern - asphalt
V-PVMT-ASPH
V-PVMT-CONC
Pavement pattern - concrete
V-PVMT-GRVL
Pavement pattern - gravel
V-PVMT-IDEN
Road, parking lot, railroad, airfield pavement annotation
V-PVMT-MRKG
Pavement markings
V-PVMT-PATT
Joint patterns, text and dimensions
Railroads
V-RAIL-CNTR
Railroad track centerlines
V-RAIL-CNTR-IDEN Railroad track centerline annotation
V-RAIL-EQPM
Railroad equipment (e.g., gates, signals)
V-RAIL-IDEN
Railroad - annotation
V-RAIL-TRAK
Railroad tracks
Rivers
V-RIVR-BOTM
River bottom
V-RIVR-CNTR
Centerline of river
V-RIVR-EDGE
River edge
V-RIVR-IDEN
Identifier tags, symbol modifiers, and text
V-RIVR-TOPB
Top of river bank
Roads, Streets, and Highways
V-ROAD-ASPH
Road outlines - asphalt surface
V-ROAD-CNTR
Road centerlines
V-ROAD-CNTR-IDEN Road centerline annotation
V-ROAD-CONC
Road outlines - concrete surface
V-ROAD-CURB
Curbs and gutters
V-ROAD-GRAL
Guard rails
V-ROAD-GRVL
Road outlines - gravel surface
V-ROAD-IDEN
Road, street, highway annotation
V-ROAD-MRKG
Pavement markings
V-ROAD-OTLN
Road outlines
V-ROAD-PATT
Joint patterns, text and dimensions
V-ROAD-SHLD
Roadway shoulders
V-ROAD-SIGN
Signs
V-ROAD-UPVD
Road outlines - unpaved surface
Riprap and Other Permanent Erosion Control Items
V-RRAP-GABN
Gabions
V-RRAP-MATS
Articulated concrete mats
V-RRAP-RVMT
Revetments
V-RRAP-WEIR
Weirs
Runways
V-RUNW-BLST
Blast pad and stopway markings
V-RUNW-CNTR
Centerlines
V-RUNW-CNTR-MRKG Centerline markings
V-RUNW-DISP
Displaced threshold markings
V-RUNW-DIST
Fixed distance markings
V-RUNW-EDGE
Airfield runway edges
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A15
Discipline: Survey/Mapping
Model File Layers/Levels
163
163
163
163
41
41
41
41
X
X
X
X
X
X
X
X
0
FENCE
0
0
0
0
0
0
0
TREEL
0
0
0
0.35
0.25
0.25
0.25
0.25
0.50
0.25
0.25
0.25
0.35
0.35
0.25
0.35
162
6
6
1
6
4
1
22
6
82
82
2
162
33
5
5
3
5
7
3
22
5
18
18
4
33
X
X
X
X
X
X
0
0
0
0
0.35
0.25
0.35
0.25
203
203
203
203
45
45
45
45
0
0
0
0
0
0
0
0
SSWAFX
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
6
3
6
6
2
1
3
3
6
3
6
1
1
6
3
5
2
5
5
4
3
2
2
5
2
5
3
3
5
2
0.25
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
0.35
0.25
0.35
0.25
Existing Profiles
ESARX
0
ESUGX
0
X
X
X
X
X
4
5
7
5
5
2
6
4
6
6
0.25
0.25
0.25
0.25
0.25
MicroStation Color #
0
0
0
0
0
Property Boundary
AutoCAD Color #
AIA Format
Level/Layer Description
V-RUNW-IDEN
Airfield runway annotation
V-RUNW-SHLD
Shoulder markings
V-RUNW-SIDE
Side stripes
V-RUNW-TDZM
Touchdown zone markers
V-RUNW-THRS
Threshold markers
Secondary Electrical Cables
V-SECD-OVHD
Overhead electrical utility lines
V-SECD-OVHD-IDEN Identifier tags, symbol modifiers, and text
V-SECD-UGND
Underground electrical utility lines
V-SECD-UGND-IDEN Identifier tags, symbol modifiers, and text
Site Features
V-SITE-EWAT
Edge of water
V-SITE-FENC
Fences and handrails
V-SITE-FENC-IDEN Fence, handrail, ramp, and trail annotation
V-SITE-FLDS
Stump fields
V-SITE-IDEN
Existing site feature/structure annotation
V-SITE-OTLN
Existing site features (play structures, bike racks, benches, recreational equipment)
V-SITE-ROCK
Rock and rock outcroppings, boulders and cobble
V-SITE-STRC
Structures (bridges, sheds, foundation pads, footings, etc.)
V-SITE-STRS
Stairs and ramps
V-SITE-VEGE
Existing treelines and vegetation
V-SITE-VEGE-IDEN Existing treelines and vegetation - identification
V-SITE-WALK
Walks, trails, and bicycle paths
V-SITE-WATR
Water features
Special Systems
V-SPCL-SYST
Special systems (UMCS, EMCS, CATV, etc.)
V-SPCL-SYST-IDEN Special systems (UMCS, EMCS, CATV, etc.) identifier tags, symbol modifier, and text
V-SPCL-TRAF
Traffic signal system
V-SPCL-TRAF-IDEN Traffic signal identifier tags, symbol modifier, and text
Sanitary Sewer
Grease traps, grit chambers, flumes, neutralizers, oil/water separators, ejectors, and valves
V-SSWR-DEVC
V-SSWR-FILT
Filtration beds
V-SSWR-FLOW
Flow direction arrows
V-SSWR-FTTG
Caps and cleanouts
V-SSWR-IDEN
Identifier tags, symbol modifier, and text
V-SSWR-JBOX
Junction boxes and manholes
V-SSWR-LAGN
Lagoons
V-SSWR-LEAC
Leach field
V-SSWR-MAIN-PIPE Sanitary sewer piping
V-SSWR-NITF
Nitrification drain fields
V-SSWR-PLNT
Treatment plants
V-SSWR-SERV-PIPE Sanitary sewer service piping
V-SSWR-SIGN
Surface markers/signs
V-SSWR-STNS-PUMP Booster pump stations
V-SSWR-TANK
Septic tanks
Storm Sewer
V-STRM-AFFF
AFFF lagoon/detention pond
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A16
Discipline: Survey/Mapping
Model File Layers/Levels
X
X
X
X
7
0
0
0
0
0
0
0
0.18
0.25
0.18
0.25
0.25
0.25
0.25
0.25
1
2
1
4
2
2
4
2
3
4
3
7
4
4
7
4
X
X
X
X
X
X
X
X
4
COMUGX
WATRX
EPUGX
LIQPET
NTGASX
SSWAFX
STRAFX
0
2
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.18
0.18
0.25
0.25
0.18
0.18
0.18
7
7
7
7
7
7
7
7
3
1
6
122
3
3
3
0
0
0
0
0
0
0
0
2
3
5
23
2
2
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Existing X-Sections
5
5
7
4
X
X
X
X
X
X
Existing Profiles
6
6
4
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0.25
0.25
0.25
0.35
0
0
2
0
3
2
5
5
5
5
0
4
2
5
3
2
2
3
3
5
2
1
3
6
6
6
6
7
2
3
6
1
3
3
1
1
6
3
0.25
0.25
0.25
0.25
0.25
0.25
0.35
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
Property Boundary
MicroStation Color #
0
CULVRT
0
0
0
0
0
0
0
STRAFX
0
0
0
0
0
0
0
AutoCAD Color #
AIA Format
Level/Layer Description
V-STRM-CHUT
Chutes and concrete erosion control structures
V-STRM-CULV
Culverts
V-STRM-DEVC
Downspouts, flumes, oil/water separators, and flap gates
V-STRM-FLOW
Flow direction arrows
V-STRM-FMON
Flow monitoring station
V-STRM-FTTG
Caps and cleanouts
V-STRM-HWAL
Headwalls and endwalls
V-STRM-IDEN
Identifier tags, symbol modifier, and text
V-STRM-INLT
Inlets (curb, surface, and catch basins)
V-STRM-MAIN-PIPE Storm sewer piping
V-STRM-MHOL
Manholes
V-STRM-POND
Retention ponds, lagoons, watersheds, and basins
V-STRM-ROOF
Roof drain line
V-STRM-SERV-PIPE Storm sewer service piping
V-STRM-SIGN
Surface markers/signs
V-STRM-STNS-PUMP Pump stations
V-STRM-SUBS-PIPE Subsurface drain piping
Survey
V-SURV-DATA
Survey data (benchmarks and horizontal control points or monuments)
V-SURV-IDEN
Survey, baseline, and control line annotation
V-SURV-LINE
Survey, baseline, and control line
V-SURV-SYMB
Survey line symbol (PIs)
Taxiways
Centerlines
V-TAXI-CNTR
V-TAXI-CNTR-IDEN Centerline annotation
V-TAXI-CNTR-MRKG Centerline markings
V-TAXI-EDGE
Edge markings
V-TAXI-HOLD
Holding lines
V-TAXI-IDEN
Taxiway - annotation
V-TAXI-OTLN
Taxiway - outlines
V-TAXI-SHLD
Shoulders with annotation
Topography
V-TOPO-BKLN
Breaklines
V-TOPO-BKLN-COMM Subsurface utilities communications breakline
V-TOPO-BKLN-DOMW Subsurface utilities water breakline
V-TOPO-BKLN-ELEC Subsurface utilities electric breakline
V-TOPO-BKLN-FUEL Subsurface utilities liquid fuel breakline
V-TOPO-BKLN-NGAS Subsurface utilities natural gas breakline
V-TOPO-BKLN-SSWR Subsurface utilities sanitary sewer breakline
V-TOPO-BKLN-STRM Subsurface utilities storm sewer breakline
V-TOPO-BNDY-EXTR Surface exterior boundary
V-TOPO-BNDY-INTR Surface interior boundary
V-TOPO-BORE
Boring locations and text
V-TOPO-COOR
Coordinate grid text annotation
V-TOPO-COOR-LALO Latitude and longitude grid ticks
V-TOPO-COOR-STAT State Plane coordinate ticks
V-TOPO-COOR-UTM~ UTM coordinate ticks
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A17
Discipline: Survey/Mapping
Model File Layers/Levels
X
X
0
4
6
1
0.25
0.35
0.35
0.35
2
4
4
4
4
7
7
7
X
X
X
X
Bogs
Fens
Wetland annotation
Fresh water marshes
Tidal saltwater marshes
Tidal freshwater marsh
Pocosins
Vernal pools, playas, prairie potholes, wet meadows, and wet prairies
Riparian forested wetlands
Sloughs
Swamps
0
0
0
0
0
0
0
0
0
0
0
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
6
2
2
162
162
162
6
6
162
162
162
5
4
4
33
33
33
5
5
33
33
33
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0.35
0.18
0.50
0.18
2
5
4
8
4
1
7
9
X
X
X
X
X
X
X
Existing X-Sections
X
X
X
X
Existing Profiles
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
5
5
22
4
4
2
2
2
3
7
4
4
5
V
4
3
V
6
6
22
2
2
3
3
3
1
4
2
2
6
V
2
1
V
0.25
0.25
0.25
0.25
0.25
0.18
0.18
0.18
0.18
0.25
0.25
0.25
0.25
0.18
0.25
0.18
0.35
MicroStation Color #
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Level/Layer Description
DTM obscure area boundary
DTM points
DTM triangles
Major contours
Major contours - annotation
Minor contours
Minor contours - annotation
Surface perimeter
Application generated shapes/lines
Shorelines, land features, and references
Cut/fill slopes
Cut/fill slope, top/toe slope annotation
Top/toe slopes
Soundings and overbanks
Spot elevations
Surface void region
Water level reference (e.g., LWRP, after-grading LWRP, SWP, etc.)
Property Boundary
AutoCAD Color #
AIA Format
V-TOPO-DTMO
V-TOPO-DTMP
V-TOPO-DTMT
V-TOPO-MAJR
V-TOPO-MAJR-IDEN
V-TOPO-MINR
V-TOPO-MINR-IDEN
V-TOPO-PERI
V-TOPO-SHAP
V-TOPO-SHOR
V-TOPO-SLOP-FILL
V-TOPO-SLOP-IDEN
V-TOPO-SLOP-TOPT
V-TOPO-SOUN
V-TOPO-SPOT
V-TOPO-VOID
V-TOPO-WATR
Airfield Traffic Areas
V-TRAF-IDEN
V-TRAF-TYPA
V-TRAF-TYPB
V-TRAF-TYPC
Wetlands
V-WETL-BOGS
V-WETL-FENS
V-WETL-IDEN
V-WETL-MRSH
V-WETL-MRSH-SALT
V-WETL-MRSH-TIDL
V-WETL-PCSN
V-WETL-PHOL
V-WETL-RPRN
V-WETL-SLGH
V-WETL-SWMP
Sections
V-SECT-IDEN
V-SECT-MBND
V-SECT-MCUT
V-SECT-PATT
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A18
Discipline: Geotechnical
Model File Layers/Levels
X
X
X
X
X
X
X
X
X
Building footprints
Building and other stucture annotation
0
0
0.50
0.25
7
2
0
4
X
X
0
0
0
0
0
0
0.35
0.35
0.35
0.50
0.35
0.35
162
162
2
4
162
162
33
33
4
7
33
33
X
X
X
X
X
X
0
0
0
0
0
0.25
0.25
0.50
0.25
0.25
6
6
4
1
2
5
5
7
3
4
X
X
X
X
X
Existing excavation
Future excavation
Proposed excavation
2
1
0
0.25
0.35
0.35
1
5
3
3
1
2
X
X
X
4
0
0
0
0
0
0.25
0.35
0.35
0.35
0.35
0.35
2
8
3
4
1
5
4
9
2
7
3
1
X
X
X
X
X
X
0
0
0
1
0
0
0
0.25
0.25
0.25
0.18
0.25
0.25
0.25
3
3
1
8
2
6
6
2
2
3
9
4
5
5
X
X
X
X
X
X
X
Extensometers
0.35
200
13
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
V
V
4
1
9
1
NA
5
V
Sections
V
V
2
5
8
5
NA
6
V
V
V
0.35
0.18
0.18
0.18
NA
V
V
MicroStation Color #
0
0
0
0
V
0
NA
V
0
Level/Layer Description
Boring Log
AutoCAD Color #
AIA Format
General Information
B-ANNO-DIMS
B-ANNO-KEYN
B-ANNO-NOTE
B-ANNO-NPLT
B-ANNO-PATT
B-ANNO-RDME
B-ANNO-REFR
B-ANNO-SYMB
B-ANNO-TEXT
Buildings
B-BLDG-FTPT
B-BLDG-IDEN
Geophysical Borings
B-BORE-CONE
B-BORE-HOLE
B-BORE-IDEN
B-BORE-LINE
B-BORE-PUSH
B-BORE-STRK
Consolidation Curve
B-CONS-DATA
B-CONS-DATA-TEXT
B-CONS-FRAM
B-CONS-GRID
B-CONS-GRID-TEXT
Excavations
B-EXCV-EXST
B-EXCV-FUTR
B-EXCV-PROP
Grouting
B-GROU-ALGN
B-GROU-HOLE
B-GROU-PRIM
B-GROU-QUAT
B-GROU-SECD
B-GROU-TERT
Water Content
B-H2OC-ATTB-DATA
B-H2OC-ATTB-TEXT
B-H2OC-GRID-MAJR
B-H2OC-GRID-MINR
B-H2OC-GRID-TEXT
B-H2OC-MOIS-DATA
B-H2OC-MOIS-TEXT
Instrumentation
B-INST-EXTN
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A19
Discipline: Geotechnical
Model File Layers/Levels
X
X
X
X
X
X
X
0
0
0
0
0
0
0.35
0.35
0.35
0.35
2.00
0.35
6
6
2
2
4
12
5
5
4
4
7
27
Field data
Bore log form
Frame for boring log and associated test data
Text associated with boring log frame
Laboratory data
Soil/rock patterns
0
0
0
0
0
0
0.25
V
0.50
0.25
0.25
0.18
3
V
4
2
1
8
2
V
7
4
3
9
0
0
0.35
0.35
5
4
1
7
X
X
0
0
0
1
0
0.25
0.25
0.25
0.18
0.25
6
6
1
8
2
5
5
3
9
4
X
X
X
X
X
0
0
0
0
0
0.25
0.25
0.50
V
V
6
6
4
V
V
5
5
7
V
V
X
X
X
X
X
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.18
0.18
0.18
0.35
6
195
6
2
8
8
8
6
5
13
5
4
9
9
9
5
0.35
17
67
Details
13
13
13
13
13
13
13
Sections
200
200
200
200
200
200
200
0.35
0.35
0.35
0.35
0.35
0.35
0.35
MicroStation Color #
0
0
0
0
0
0
0
Level/Layer Description
Extensometer identification
Pressure gages
Pressure gage identification
Inclinometers
Inclinometer identification
Settlement monuments
Settlement monument identification
Boring Log
AutoCAD Color #
AIA Format
B-INST-EXTN-IDEN
B-INST-GAGE
B-INST-GAGE-IDEN
B-INST-INCL
B-INST-INCL-IDEN
B-INST-SETL
B-INST-SETL-IDEN
Joints
B-JNTS-CNTJ-LONG
B-JNTS-CNTJ-TRAV
B-JNTS-CTRJ-LONG
B-JNTS-CTRJ-TRAV
B-JNTS-EDGE
B-JNTS-EXPJ
Logs
B-LOGS-FDTA
B-LOGS-FORM
B-LOGS-FRAM
B-LOGS-FRAM-TEXT
B-LOGS-LDTA
B-LOGS-PATT
Monitoring Points
B-MONP-SEEP
B-MONP-WEIR
Normal Stress
B-NORM-DATA
B-NORM-DATA-TEXT
B-NORM-GRID-MAJR
B-NORM-GRID-MINR
B-NORM-GRID-TEXT
Plasticity Chart
B-PLAS-DATA
B-PLAS-DATA-TEXT
B-PLAS-FRAM
B-PLAS-GRID
B-PLAS-GRID-TEXT
Pavements
B-PVMT-MISM
B-PVMT-OTLN-AGSC
B-PVMT-OTLN-HMAC
B-PVMT-OTLN-PCCP
B-PVMT-PATT-AGSC
B-PVMT-PATT-HMAC
B-PVMT-PATT-PCCP
B-PVMT-REIN
Sample Locations
B-SAMP-AUGR
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A20
Discipline: Geotechnical
Model File Layers/Levels
X
X
X
X
X
X
X
X
0
0
0
0
0
0.25
0.25
0.50
0.25
V
6
6
4
1
2
5
5
7
3
4
X
X
X
X
X
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0.25
0.25
0.25
0.18
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
4
4
1
8
2
6
6
2
2
5
5
3
3
7
7
7
7
3
9
4
5
5
4
4
1
1
2
2
0
0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
0.25
0.25
0.50
0.25
V
6
6
4
1
2
5
5
7
3
4
X
X
X
X
X
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
82
82
82
82
82
18
18
18
18
18
X
X
X
X
X
0
0
0
1
0.25
0.25
0.25
0.18
6
6
1
8
5
5
3
9
X
X
X
X
Details
67
67
67
4
42
42
23
23
Sections
17
17
17
2
83
83
122
122
0.35
0.35
0.35
0.35
0.50
0.50
0.35
0.35
MicroStation Color #
0
0
0
0
0
0
0
0
Boring Log
AutoCAD Color #
AIA Format
Level/Layer Description
B-SAMP-CORE
Core sample location
B-SAMP-DRVE
Drive sample (shelby split spoon) location
B-SAMP-GRAB
Grab sample location
B-SAMP-IDEN
Sample location identification
B-SAMP-PERC
Percolation test hole
B-SAMP-PITS
Test pit sample location
B-SAMP-VERT
Vertical core hole location
B-SAMP-WASH
Wash bored hole location
Shear Strength vs. Normal Stress
B-SSNS-DATA
Shear strength vs. normal stress data
B-SSNS-DATA-TEXT Shear strength vs. normal stress data text
B-SSNS-FRAM
Shear strength vs. normal stress frame
B-SSNS-GRID
Shear strength vs. normal stress grid
B-SSNS-GRID-TEXT Shear strength vs. normal stress grid text
Shear Strength
B-SSTR-1TST-DATA Shear strength 1 Point Q test data
B-SSTR-1TST-TEXT Shear strength 1 Point Q test text
B-SSTR-GRID-MAJR Shear strength major grid
B-SSTR-GRID-MINR Shear strength minor grid
B-SSTR-GRID-TEXT Shear strength grid text
B-SSTR-QTST-DATA Shear strength Q test data
B-SSTR-QTST-TEXT Shear strength Q test text
B-SSTR-RTST-DATA Shear strength R test data
B-SSTR-RTST-TEXT Shear strength R test text
B-SSTR-STST-DATA Shear strength S test data
B-SSTR-STST-TEXT Shear strength S test text
B-SSTR-UTST-DATA Shear strength UCT test data
B-SSTR-UTST-TEXT Shear strength UCT test text
B-SSTR-VTST-DATA Shear strength Vane shear test data
B-SSTR-VTST-TEXT Shear strength Vane shear test text
Tabular Test
B-TABT-DATA
Tabular test data
B-TABT-DATA-TEXT Tabular test data text
B-TABT-FRAM
Tabular test data frame
B-TABT-GRID
Tabular test data grid
B-TABT-GRID-TEXT Tabular test data grid text
Wells
B-WELL-ASR~
ASR wells
B-WELL-HORZ
Horizontal drain
B-WELL-MONT
Monitoring wells
B-WELL-PIZO
Piezometers
B-WELL-VERT
Vertical drain
Wet Density
B-WETD-DATA
Wet density data
B-WETD-DATA-TEXT Wet density data text
B-WETD-GRID-MAJR Wet density major grid
B-WETD-GRID-MINR Wet density minor grid
Graphic Defaults
Line Style
Level/Layer Naming
A21
Discipline: Geotechnical
Model File Layers/Levels
0
0
V
0
0
0
0.35
0.18
V
0.18
0.35
0.18
2
5
V
8
3
8
4
1
V
9
2
9
Details
Sections
0.25
MicroStation Color #
Level/Layer Description
Wet density grid text
Boring Log
AutoCAD Color #
AIA Format
B-WETD-GRID-TEXT
Sections
B-SECT-IDEN
B-SECT-MBND
B-SECT-MCUT
B-SECT-PATT
B-SECT-SLOG
B-SECT-STRA
Detail Information
B-DETL-GRPH
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
A22
Discipline: Civil
Model File Layers/Levels
X
X
X
X
X
X
X
X
7
0
0
0
0
0
0
0
0
0
0
0.25
0.35
0.35
0.25
0.35
0.35
0.50
0.50
0.25
0.35
0.35
1
2
2
1
2
2
4
4
1
2
2
3
4
4
3
4
4
7
7
3
4
4
0
2
0
0
6
7
0
0
0
0
0
0
0
2
0
3
0
0.25
0.35
0.50
0.25
0.35
0.25
0.25
0.50
0.25
0.50
0.35
0.25
0.25
0.35
0.18
0.50
0.25
6
5
4
4
22
5
6
4
6
4
2
2
7
22
6
5
7
5
1
7
7
22
1
5
7
5
7
4
4
0
22
5
1
0
0
0
0.50
0.50
4
4
7
7
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X-Sections
2
4
3
2
5
2
5
4
X
X
X
X
X
X
X
Elevations
3
2
1
3
6
3
6
2
X
X
Profiles
0.35
0.35
0.35
0.35
0.18
0.35
0.35
0.35
X
X
Utilities Plan
0
4
0
0
0
0
0
0
X
X
Airfield Plan
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
V
V
16
4
1
9
1
NA
5
V
Grading Plan
V
V
113
2
5
8
5
NA
6
V
Navigation/Dredging Plan
Site Plan
V
V
0.18
0.35
0.18
0.18
0.18
NA
V
V
MicroStation Color #
0
0
0
0
0
V
0
NA
V
0
Eco-Restoration Plan
AutoCAD Color #
AIA Format
Level/Layer Description
General Information
C-ANNO-DIMS
Witness/extension lines, dimension terminators, dimension text
C-ANNO-KEYN
Reference keynotes with associated leaders
C-ANNO-MASK
Text/shape mask for use with photo backgrounds
C-ANNO-NOTE
General notes and general remarks
C-ANNO-NPLT
Non-plotting graphic information
C-ANNO-PATT
Patterning, poche, shading, and hatching
C-ANNO-RDME
Read-me information
C-ANNO-REFR
Reference files and raster attachments
C-ANNO-SYMB
Miscellaneous symbols
C-ANNO-TEXT
Miscellaneous text and callouts with associated leaders
Alignments
C-ALGN-DATA
Alignment coordinates and curve data
C-ALGN-LINE
Alignments
C-ALGN-MAJR
Alignment major stationing and tick marks
C-ALGN-MARK
Alignment tick marks
C-ALGN-MINR
Alignment minor stationing and tick marks
C-ALGN-STAT
Alignment stationing and tick marks, alignment PI stations
C-ALGN-SYMB
Alignment symbols (PIs)
Alignment text, annotation with associated leaders
C-ALGN-TEXT
Aprons
C-APRN-CNTR
Apron centerlines
C-APRN-CNTR-IDEN Apron centerline annotation
C-APRN-GRND
Grounding points
C-APRN-HOLD
Holding position markings
C-APRN-IDEN
Airfield apron - annotation
C-APRN-MOOR
Mooring points
C-APRN-MRKG
Apron markings
C-APRN-OTLN
Airfield apron - outlines
C-APRN-SECU
Security zone markings
C-APRN-SHLD
Shoulders with annotation
C-APRN-SHLD-MRKG Shoulder stripes
Beach Renourishment
C-BECH-BANK-TOP~ Beach top of bank
C-BECH-BKLN
Beach breakline
C-BECH-BLIN
Beach baseline and control line
C-BECH-BLIN-IDEN Beach baseline and control line annotation
C-BECH-BNCH
Beach bench
C-BECH-CNTR
Beach centerline
C-BECH-CNTR-IDEN Beach centerline annotation
C-BECH-ELIN
Beach erosion control line
C-BECH-ELIN-IDEN Beach erosion control line annotation
C-BECH-LIMT
Beach limit lines
C-BECH-OHWM
Ordinary high water marks
C-BECH-OTLN
Beach outline
C-BECH-SLOP-IDEN Beach slope indicator with annotation
C-BECH-SLOP-TOP~ Beach top of slope
C-BECH-SYMB
Beach symbols
C-BECH-TOE~
Beach toe
C-BECH-TOE~-IDEN Beach toe annotation
Buildings and Primary Structures
C-BLDG-DECK
Outdoor decks (attached, no roof overhead)
C-BLDG-DOCK
Loading docks
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A23
Discipline: Civil
Model File Layers/Levels
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0.35
0.35
2
2
4
4
X
X
X
X
0
7
0
0
0
0
0
0.50
0.25
0.25
0.50
0.35
0.50
0.25
4
1
4
4
2
4
4
7
3
7
7
4
7
7
0
0
0
0
7
0
0
0
0
0
0
0
0
0
0
0
3
0
0
3
0.35
0.35
0.35
0.35
0.25
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.50
0.35
0.35
0.50
0.35
0.35
0.50
2
2
2
6
5
5
3
3
6
6
6
V
2
4
6
2
5
6
2
4
4
4
4
5
1
1
2
2
5
5
5
V
4
7
5
4
1
5
4
7
0
FIRE
0
0
0
WATERL
0
0
NONPOT
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
6
1
6
1
2
6
3
1
6
3
3
6
1
6
6
1
5
3
5
3
4
5
2
3
5
2
2
5
3
5
5
3
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
2
X-Sections
X
X
X
X
X
X
X
X
X
X
Elevations
X
X
X
X
X
X
X
X
X
X
Profiles
X
X
X
X
X
X
0
4
7
7
Utilities Plan
X
X
7
2
4
4
Airfield Plan
X
X
0.70
0.35
0.50
0.50
Navigation/Dredging Plan
X
X
0
0
0
0
X
X
X
X
Grading Plan
X
X
X
X
Site Plan
X
X
X
X
MicroStation Color #
X
X
X
X
AutoCAD Color #
Eco-Restoration Plan
AIA Format
Level/Layer Description
C-BLDG-FTPT
Building footprints
C-BLDG-IDEN
Building and other stucture annotation
C-BLDG-OVHD
Building overhangs
C-BLDG-PRCH
Porches (attached, roof overhead)
Borrow Areas
C-BORW-IDEN
Borrow/spoil area annotation
Borrow/spoil area
C-BORW-LINE
Bridges
C-BRDG-CHRD-LOW~ Low chord
C-BRDG-CNTR
Bridge centerlines
C-BRDG-CTLJ
Control joints
C-BRDG-DECK
Bridge deck
C-BRDG-IDEN
Bridge annotation
C-BRDG-OTLN
Bridge outlines
Bridge railing
C-BRDG-RLG~
Channels
C-CHAN-BANK-IDEN Channel/canal top of bank annotation
C-CHAN-BANK-TOP~ Channel/canal top of bank
C-CHAN-BNCH
Channel/canal bench design feature lines (breaklines form DTMs)
C-CHAN-BWTR
Breakwaters
C-CHAN-CNTR
Channel centerline and survey report lines
C-CHAN-CNTR-IDEN Channel centerline and survey report lines - annotation
C-CHAN-DACL
De-authorized channel limits, anchorages, etc.
C-CHAN-DACL-IDEN De-authorized channel limits, anchorages, etc. - annotation
C-CHAN-DOCK
Docks, decks, floats, piers, and mooring facilities
C-CHAN-LIMT
Channel limits, anchorages, turning basins, disposal areas, etc.
C-CHAN-LIMT-IDEN Channel limits, anchorages, turning basins, disposal areas, etc. - annotation
C-CHAN-NAID
Navigation aids and text
C-CHAN-SLOP-LINE Channel cut/fill slope (Indicates cut and fill lines)
C-CHAN-SPOL
Spoil limits
C-CHAN-SYMB
Channel/canal symbols
C-CHAN-TEXT
Channel/canal text, annotation with associated leaders
C-CHAN-TOE~
Channel/canal toe
C-CHAN-TOE~-IDEN Channel/canal toe annotation
C-CHAN-TURN
Turning points
C-CHAN-WIDE
Channel/canal widener
Domestic Water
C-DOMW-DEVC
Connectors, faucets, reducers, regulators, vents, intake points, taps, backflow preventers, and valves
C-DOMW-FIRE
Fire lines
C-DOMW-FTTG
Caps, cleanouts, crosses, and tees
C-DOMW-HYDT
Hydrants
C-DOMW-IDEN
Identifier tags, symbol modifier, and text
C-DOMW-MAIN-PIPE Main domestic water piping
C-DOMW-METR
Meters
C-DOMW-NPW~-HYDT Non-potable hydrants/flushing hydrants
C-DOMW-NPW~-PIPE Non-potable water piping
C-DOMW-PITS-VENT Vent pits
C-DOMW-PITS-VALV Valve pits/vaults
C-DOMW-SERV-PIPE Domestic water service piping
C-DOMW-SIGN
Surface markers/signs
C-DOMW-STNS-PUMP Booster pump stations
C-DOMW-STNS-REDC Pressure reducing stations
C-DOMW-TANK
Water storage tanks
Graphic Defaults
Line Style
Level/Layer Naming
A24
Discipline: Civil
Model File Layers/Levels
6, DITCH
7
0
0
0
0.25
0.25
0.25
0.35
0.25
5
5
4
3
3
1
1
7
2
2
X
X
X
X
X
0
0
2
0
0
0
0
0.50
0.50
0.35
0.35
0.35
0.50
0.50
4
4
6
6
2
4
4
7
7
5
5
4
7
7
V
V
0
0
0
V
SILT
0
0
SSILT
0.25
0.35
0.50
0.50
0.35
0.25
0.35
0.35
0.35
0.35
3
6
4
4
3
3
2
2
2
2
2
5
7
7
2
2
4
4
4
4
X
X
X
X
X
X
X
X
X
X
6
3
0
2
7
0
0.35
0.35
0.35
0.35
0.35
0.35
6
2
6
2
6
2
5
4
5
4
5
4
X
X
X
X
X
X
X
X
X
X
X
X
0
0
7
0
0
0
0
0
0
0
0
0.50
0.35
0.25
0.35
0.35
0.35
0.50
0.35
0.35
0.50
0.35
20
20
20
20
6
6
22
22
4
2
20
6
6
6
6
5
5
22
22
7
4
6
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0.35
0.35
6
6
5
5
X
X
X
X
X
X
Details
X
X
X
X-Sections
4
7
4
Elevations
2
4
2
Profiles
0.35
0.50
0.35
Utilities Plan
0
0
0
Airfield Plan
Navigation/Dredging Plan
Site Plan
0.35
Eco-Restoration Plan
MicroStation Color #
Grading Plan
AutoCAD Color #
AIA Format
Level/Layer Description
C-DOMW-WELL
Water well houses
Dredging
C-DRED-IDEN
Dredging annotation
C-DRED-LIMT
Dredge limit lines
C-DRED-OHWM
Ordinary high water marks
Ditches or Washes
C-DTCH-BOTM
Bottom of ditch or wash
C-DTCH-CNTR
Centerline of ditch or wash
C-DTCH-EWAT
Edge of water
C-DTCH-IDEN
Ditches and washes annotation
C-DTCH-TOP~
Top of ditch or wash
Habitats/Landforms
C-ECCO-BURR
Burrow
C-ECCO-DENS
Den
C-ECCO-GATR
Gator hole
C-ECCO-HUMK
Hummocks
C-ECCO-IDEN
Habitat annotation
C-ECCO-NEST
Nest, nesting tree
C-ECCO-PRCH
Perch/nesting hole
Erosion and Sediment Control (Temporary/Construction)
C-EROS-CIPR
Culvert inlet protection
C-EROS-CNTE
Construction entrance
C-EROS-DDIV
Drainage divides
C-EROS-DVDK
Diversion dike
C-EROS-IDEN
Erosion and sediment control annotation
C-EROS-INPR
Inlet protection
C-EROS-SILT
Silt fence
C-EROS-SILT-CHCK Silt check
C-EROS-SILT-TRAP Silt trap
C-EROS-SSLT
Super silt fence
Flood Hazard Area
C-FLHA-025Y
25 year mark
C-FLHA-050Y
50 year mark
C-FLHA-100Y
100 year mark
C-FLHA-200Y
200 year mark
C-FLHA-500Y
500 year mark
Flood hazard area annotation
C-FLHA-IDEN
Floodwalls
C-FLOD-BASE
Floodwall base of wall
C-FLOD-BASE-IDEN Floodwall base of wall annotation
C-FLOD-CNTR
Floodwall centerline
C-FLOD-CNTR-IDEN Floodwall centerline annotation
C-FLOD-DRNS
Floodwall toe drain
C-FLOD-DRNS-IDEN Floodwall toe drain annotation
C-FLOD-PILE
Floodwall sheet piling
C-FLOD-PILE-IDEN Floodwall sheet piling annotation
C-FLOD-TOE~
Floodwall toe outline
C-FLOD-TOP~
Floodwall top of wall
C-FLOD-TOP~-IDEN Floodwall top of wall annotation
Liquid Fuel
C-FUEL-BERM
Berms for retaining fuel in case of major tank/line rupture
C-FUEL-DEFL-PIPE Defueling piping
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A25
Discipline: Civil
Model File Layers/Levels
0
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.50
0.35
0.35
1
1
1
1
2
6
4
6
6
3
3
3
3
4
5
7
5
5
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
6
6
6
2
1
6
5
5
5
4
3
5
Details
7
9
9
4
X-Sections
4
8
8
2
Elevations
0.50
0.35
0.18
0.35
Profiles
0
1
1
1
Utilities Plan
5
5
2
7
5
7
9
9
9
9
3
4
5
1
4
Airfield Plan
6
6
3
4
6
4
8
8
8
8
1
2
6
5
2
0.35
0.35
0.35
0.50
0.35
0.50
0.35
0.35
0.35
0.35
0.25
0.35
0.35
0.50
0.35
0
0
0
0
3
0
0
0
0
0
0
0
0
7
0
5
5
4
3
5
2
2
2
2
5
5
2
2
Navigation/Dredging Plan
6
6
2
1
6
3
3
3
3
6
6
3
3
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
Eco-Restoration Plan
0.35
0
0
0
0
LIQPET
0
0
0
0
0
0
0
0
Grading Plan
Site Plan
MicroStation Color #
C-FUEL-FLOW
C-FUEL-FTTG
C-FUEL-IDEN
C-FUEL-JBOX
C-FUEL-MAIN-PIPE
C-FUEL-METR
C-FUEL-PITS-HYDT
C-FUEL-PITS-VENT
C-FUEL-PITS-VALV
C-FUEL-SERV-PIPE
C-FUEL-STNS-PUMP
C-FUEL-TANK
C-FUEL-TRCH
Grade Linework
C-GRAD-ALOW
Allowable over depth
C-GRAD-BNCH
Bench cut
C-GRAD-DSGN
Design grade (proposed)
C-GRAD-EXCV
Excavation grade
C-GRAD-EXST
Existing grade, ground line
C-GRAD-FNSH
Finished grade
C-GRAD-FNSH-PRP1 Proposed Surface #1
C-GRAD-FNSH-PRP2 Proposed Surface #2
C-GRAD-FNSH-PRP3 Proposed Surface #3
C-GRAD-FNSH-PRP4 Proposed Surface #4
C-GRAD-GTXL
Geotextile placement grade
C-GRAD-IDEN
Grade annotation for cross sections and profiles
C-GRAD-REQD
Required depth
C-GRAD-SCLN
Stability control line
C-GRAD-WATR
Water surface in section view
Grid Lines
C-GRID-FRAM
Frame
C-GRID-MAJR
Major grid lines
C-GRID-MINR
Minor grid lines
C-GRID-TEXT
Border text, annotation
Heliports
C-HELI-BLST
Blast pad and stopway markings
C-HELI-CNTR
Centerline markings
C-HELI-DISP
Displaced threshold markings
C-HELI-DIST
Fixed distance markings
C-HELI-IDEN
Heliport numbers and letters
C-HELI-SHLD
Shoulder markings
C-HELI-SIDE
Side stripes
C-HELI-TDZM
Touchdown zone markers
C-HELI-THRS
Threshold markers
Industrial Waste Water
C-INDW-DEVC
Grit chambers, meters, flumes, neutralizers, oil/water separators, ejectors, tanks, and valves
C-INDW-FLOW
Flow direction arrows
C-INDW-FTTG
Caps and cleanouts
C-INDW-IDEN
Identifier tags, symbol modifier, and text
C-INDW-JBOX
Junction boxes and manholes
C-INDW-LAGN
Lagoons
AutoCAD Color #
Level/Layer Description
Air eliminators, filter strainers, hydrant fill points, line vents, markers, oil/water separators, reducers,
regulators, and valves
Flow direction arrows
Caps, crosses, and tees
Identifier tags, symbol modifier, and text
Junction boxes, manholes, handholes, test boxes
Main fuel piping
Meters
Hydrant control pits
Vent pits
Valve pits
Service piping
Booster pump stations
Fuel tanks
Fuel line trench
AIA Format
C-FUEL-DEVC
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A26
Discipline: Civil
Model File Layers/Levels
0.35
0.35
0.35
0.35
0.35
0.35
0.35
6
6
2
2
4
12
2
5
5
4
4
7
27
4
0
0
0
0
0
0
7
0
0
0
0
0
2
0
0.25
0.35
0.35
0.35
0.25
0.50
0.25
0.35
0.35
0.50
0.35
0.35
0.35
0.25
20
2
6
20
2
4
20
20
2
4
2
2
20
20
6
4
5
6
4
7
6
6
4
7
4
4
6
6
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Battle positions
Range cameras
Fox holes and pits
Moving army targets
Moving infantry targets
Moving infantry targets annotation
Pop up targets
Pop up targets annotation
Stationary army targets
Stationary army targets annotation
Stationary infantry targets
Stationary infantry targets annotation
0
0
0
0
0
0
0
0
0
0
0
0
0.50
0.35
0.35
0.50
0.50
0.35
0.50
0.35
0.50
0.35
0.50
0.35
4
6
6
4
4
2
4
2
4
2
4
2
7
5
5
7
7
4
7
4
7
4
7
4
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
6
6
6
2
3
6
5
5
5
4
2
5
X
X
Details
0
0
0
0
0
0
0
X
X
X
X
X-Sections
X
X
X
Elevations
X
X
X
X
X
X
X
X
Profiles
5
4
5
2
Utilities Plan
6
2
6
3
Airfield Plan
0.35
0.35
0.35
0.25
0
0
0
0
Navigation/Dredging Plan
5
5
3
3
5
6
6
1
1
6
Eco-Restoration Plan
0.35
0.35
0.35
0.35
0.35
Grading Plan
MicroStation Color #
IWASTE
0
0
0
0
Level/Layer Description
Main industrial waste water piping
Treatment plants
Industrial waste water service piping
Surface markers/signs
Lift stations
Site Plan
AutoCAD Color #
AIA Format
C-INDW-MAIN-PIPE
C-INDW-PLNT
C-INDW-SERV-PIPE
C-INDW-SIGN
C-INDW-STNS-LIFT
Irrigation
C-IRRG-EQPM
C-IRRG-IDEN
C-IRRG-PIPE
C-IRRG-WELL
Joints
C-JNTS-CNSL
C-JNTS-CNST
C-JNTS-CNTL
C-JNTS-CNTT
C-JNTS-EDGE
C-JNTS-EXPJ
C-JNTS-IDEN
Levees
C-LEVE-BANK-IDEN
C-LEVE-TOPB
C-LEVE-BERM
C-LEVE-BNCH
C-LEVE-BNCH-IDEN
C-LEVE-BRRW
C-LEVE-CNTR
C-LEVE-CNTR-IDEN
C-LEVE-IDEN
C-LEVE-OTLN
C-LEVE-SLOP
C-LEVE-STAN
C-LEVE-TOE~
C-LEVE-TOE~-IDEN
Military Ranges
C-MILR-BATP
C-MILR-CAMS
C-MILR-FOXH
C-MILR-MATS
C-MILR-MITS
C-MILR-MITS-IDEN
C-MILR-PUTS
C-MILR-PUTS-IDEN
C-MILR-SATS
C-MILR-SATS-IDEN
C-MILR-SITS
C-MILR-SITS-IDEN
Natural Gas
C-NGAS-EQPM
C-NGAS-FLOW
C-NGAS-FTTG
C-NGAS-IDEN
C-NGAS-INST
C-NGAS-MHOL
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A27
Discipline: Civil
Model File Layers/Levels
0.25
0.35
0.35
0.35
0.35
1
2
2
4
4
3
4
4
7
7
X
X
X
X
X
7
0
0
0
0
0.25
0.35
0.35
0.35
0.25
1
2
2
4
2
3
4
4
7
4
X
X
X
X
X
0
7
0
0
0
0
0
0
0
0
0
0.35
0.25
0.25
0.35
0.35
0.35
0.25
0.35
0.35
0.50
0.35
2
1
1
3
1
91
1
6
2
4
2
4
3
3
2
3
106
3
5
4
7
4
X
X
X
X
X
X
X
X
X
X
X
CONLMT
CONEMT
0
PROPL
6
0
3
7
0
4
0
0.70
0.70
0.35
0.50
0.70
0.70
0.25
0.50
0.35
0.50
0.35
7
7
6
2
7
7
7
6
6
6
6
0
0
5
4
0
0
0
5
5
5
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
0
0.18
0.18
0.18
0.25
0.35
0.18
8
8
8
2
2
8
9
9
9
4
4
9
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
7
0
0
0
0
X-Sections
X
X
Elevations
2
4
X
X
X
X
X
X
X
Profiles
3
2
Airfield Plan
0.35
0.35
0
0
5
2
2
3
5
5
2
Utilities Plan
Navigation/Dredging Plan
6
3
3
1
6
6
3
Eco-Restoration Plan
0.35
0.35
0.35
0.35
0.35
0.35
0.25
Grading Plan
MicroStation Color #
NTGASN
0
0
0
0
0
0
Site Plan
AutoCAD Color #
AIA Format
Level/Layer Description
C-NGAS-PIPE
Natural gas piping
C-NGAS-PITS-VENT Vent pits
C-NGAS-PITS-VALV Valve pits/boxes
C-NGAS-SIGN
Surface markers/signs
C-NGAS-STNS-PUMP Compressor stations
C-NGAS-STNS-REDC Reducing stations
Tanks
C-NGAS-TANK
Obstructions
C-OBST-AIRS
Airspace obstructions
C-OBST-AIRS-IDEN Obstruction annotation
Overrun Areas
C-OVRN-CNTR
Centerlines
C-OVRN-CNTR-IDEN Centerline annotation
C-OVRN-IDEN
Airfield overrun area - annotation
C-OVRN-OTLN
Airfield overrun area - outlines
C-OVRN-SHLD-MRKG Shoulder markings
Pads (Arm/Disarm/Calibration, etc.)
C-PADS-CNTR
Centerlines
C-PADS-CNTR-IDEN Centerline annotation
C-PADS-IDEN
Pads - annotation
C-PADS-OTLN
Pad - outlines
C-PADS-SHLD
Shoulders with annotation
Parking Lots
C-PRKG-CARS
Graphic illustration of cars
C-PRKG-CNTR
Parking lot centerlines
C-PRKG-CNTR-IDEN Parking lot centerline annotation
C-PRKG-CURB
Curbs and gutters
C-PRKG-DRAN
Drainage slope indications
C-PRKG-FIXT
Parking lot fixtures (e.g., wheel stops, parking meters)
C-PRKG-FLNE
Fire lanes
C-PRKG-IDEN
Parking lot annotation
C-PRKG-MRKG
Pavement markings
C-PRKG-OTLN
Parking lot outlines
C-PRKG-SIGN
Signs
Property
C-PROP-CONS
Construction limits/controls, staging area
C-PROP-ESMT
Easements
C-PROP-IDEN
Property annotation
C-PROP-LINE
Property lines
C-PROP-RWAY
Right of ways
C-PROP-RWAY-ACQU Right of way to be acquired in perpetuity
C-PROP-SBCK
Setback lines
C-PROP-SECT
Section lines
C-PROP-SECT-IDEN Section lines annotation
C-PROP-TSHP
Township/range lines
C-PROP-TSHP-IDEN Township/range lines annotation
Pavements
C-PVMT-ASPH
Pavement pattern - asphalt
C-PVMT-CONC
Pavement pattern - concrete
C-PVMT-GRVL
Pavement pattern - gravel
C-PVMT-IDEN
Road, parking lot, railroad, airfield pavement annotation
C-PVMT-MRKG
Pavement markings
Joint patterns, text and dimensions
C-PVMT-PATT
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A28
Discipline: Civil
Model File Layers/Levels
X
X
X
X
X
X
X
X
X
X
X
X
X
V
V
V
V
0.25
0.25
0.25
0.25
1
3
1
3
3
2
3
2
X
X
X
X
0
7
0
0
0
0
0
0
0
0
0
0.35
0.25
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
1
1
1
1
1
6
2
6
4
6
6
3
3
3
3
3
5
4
5
7
5
5
2
FENCE
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
3
6
6
6
22
6
2
2
5
5
5
22
5
4
X
X
X
X
X
X
X
0.35
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
9
3
3
0
5
5
6
5
4
9
5
3
2
X
X
X-Sections
8
1
1
7
6
6
20
6
2
8
6
1
3
X
X
X
X
X
Elevations
0.25
0.25
0.25
0.25
0.35
0.35
0.25
0.35
0.35
0.18
0.35
0.25
0.25
X
X
X
X
X
Profiles
0
7
0
0
0
GUARD
0
0
0
0
0
0
0
Utilities Plan
X
X
X
X
X
Airfield Plan
1
3
1
4
1
5
1
5
2
5
0.35
0.25
0.50
0.35
0.35
0
7
0
0
0
Navigation/Dredging Plan
3
3
106
5
4
1
1
91
6
2
Eco-Restoration Plan
0.25
0.35
0.35
0.35
0.35
Grading Plan
MicroStation Color #
7
0
0
0
RAILRD
Site Plan
AutoCAD Color #
AIA Format
Level/Layer Description
Railroads
C-RAIL-CNTR
Railroad track centerlines
C-RAIL-CNTR-IDEN Railroad track centerline annotation
C-RAIL-EQPM
Railroad equipment (e.g., gates, signals)
C-RAIL-IDEN
Railroad - annotation
C-RAIL-TRAK
Railroad tracks
Rivers
C-RIVR-BOTM
River bottom
C-RIVR-CNTR
Centerline of river
C-RIVR-EDGE
River edge
C-RIVR-IDEN
Identifier tags, symbol modifiers, and text
Top of river bank
C-RIVR-TOPB
Roads, Streets, and Highways
C-ROAD-ASPH
Road outlines - asphalt surface
C-ROAD-CNTR
Road centerlines
C-ROAD-CNTR-IDEN Road centerline annotation
C-ROAD-CONC
Road outlines - concrete surface
C-ROAD-CURB
Curbs and gutters
C-ROAD-GRAL
Guard rails
C-ROAD-GRVL
Road outlines - gravel surface
C-ROAD-IDEN
Road, street, highway annotation
C-ROAD-MRKG
Pavement markings
C-ROAD-PATT
Joint patterns, text and dimensions
C-ROAD-SHLD
Roadway shoulder
C-ROAD-SIGN
Signs
C-ROAD-UPVD
Road outlines - unpaved surface
Riprap and Other Permanent Erosion Control Items
C-RRAP-GABN
Gabions
C-RRAP-MATS
Articulated concrete mats
C-RRAP-RVMT
Revetments
Weirs
C-RRAP-WEIR
Runways
C-RUNW-BLST
Blast pad and stopway markings
C-RUNW-CNTR
Centerlines
C-RUNW-CNTR-MRKG Centerline markings
C-RUNW-DISP
Displaced threshold markings
C-RUNW-DIST
Fixed distance markings
C-RUNW-EDGE
Airfield runway edges
C-RUNW-IDEN
Airfield runway annotation
C-RUNW-SHLD
Shoulder markings
C-RUNW-SIDE
Side stripes
C-RUNW-TDZM
Touchdown zone markers
C-RUNW-THRS
Threshold markers
Site Features
C-SITE-BLIN
Site breakline
C-SITE-FENC
Fences and handrails
C-SITE-FENC-IDEN Fence, handrail, ramp, and trail annotation
C-SITE-IDEN
Site feature annotation
C-SITE-STRC
Structures (bridges, sheds, foundation pads, footings, etc.)
C-SITE-STRS
Stairs and ramps
Walks, trails and bicycle paths
C-SITE-WALK
Sanitary Sewer
C-SSWR-DEVC
Grease traps, grit chambers, flumes, neutralizers, oil/water separators, ejectors, and valves
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A29
Discipline: Civil
Model File Layers/Levels
5
5
7
Centerlines
Centerline annotation
Centerline markings
Edge markings
Holding lines
Taxiway - annotation
Taxiway - outlines
Shoulders with annotation
7
0
0
0
0
0
0
0
0.25
0.35
0.25
0.35
0.35
0.35
0.35
0.35
1
2
1
4
2
2
4
2
3
4
3
7
4
4
7
4
0
2
4
COMUGN
WATERL
EPUGN
0.18
0.18
0.50
0.50
0.50
0.50
3
1
7
7
7
7
2
3
0
0
0
0
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
6
6
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X-Sections
0.35
0.35
0.35
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Elevations
0
0
2
Profiles
Utilities Plan
2
3
2
5
5
5
5
0
4
2
5
3
2
2
3
3
5
2
Airfield Plan
3
1
3
6
6
6
6
7
2
3
6
1
3
3
1
1
6
3
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.50
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
X
X
X
0
0
CULVRT
0
0
0
0
0
0
0
STRAF
0
0
0
0
0
0
0
Navigation/Dredging Plan
2
5
5
4
3
2
2
5
2
5
3
3
5
2
3
6
6
2
1
3
3
6
3
6
1
1
6
3
Eco-Restoration Plan
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
Grading Plan
MicroStation Color #
0
0
0
0
0
0
0
SSWAF
0
0
0
0
0
0
Site Plan
Level/Layer Description
Filtration beds
Flow direction arrows
Caps and cleanouts
Identifier tags, symbol modifier, and text
Junction boxes and manholes
Lagoons
Leach field
Sanitary sewer piping
Nitrification drain fields
Treatment plants
Sanitary sewer service piping
Surface markers/signs
Booster pump stations
Septic tanks
AutoCAD Color #
AIA Format
C-SSWR-FILT
C-SSWR-FLOW
C-SSWR-FTTG
C-SSWR-IDEN
C-SSWR-JBOX
C-SSWR-LAGN
C-SSWR-LEAC
C-SSWR-MAIN-PIPE
C-SSWR-NITF
C-SSWR-PLNT
C-SSWR-SERV-PIPE
C-SSWR-SIGN
C-SSWR-STNS-PUMP
C-SSWR-TANK
Storm Sewer
C-STRM-AFFF
C-STRM-CHUT
C-STRM-CULV
C-STRM-DEVC
C-STRM-FLOW
C-STRM-FMON
C-STRM-FTTG
C-STRM-HWAL
C-STRM-IDEN
C-STRM-INLT
C-STRM-MAIN-PIPE
C-STRM-MHOL
C-STRM-POND
C-STRM-ROOF
C-STRM-SERV-PIPE
C-STRM-SIGN
C-STRM-STNS-PUMP
C-STRM-SUBS-PIPE
Survey
C-SURV-DATA
C-SURV-IDEN
C-SURV-LINE
Taxiways
C-TAXI-CNTR
C-TAXI-CNTR-IDEN
C-TAXI-CNTR-MRKG
C-TAXI-EDGE
C-TAXI-HOLD
C-TAXI-IDEN
C-TAXI-OTLN
C-TAXI-SHLD
Topography
C-TOPO-BNDY-EXTR
C-TOPO-BNDY-INTR
C-TOPO-BKLN
C-TOPO-BKLN-COMM
C-TOPO-BKLN-DOMW
C-TOPO-BKLN-ELEC
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
A30
Discipline: Civil
Model File Layers/Levels
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
6
2
2
162
162
162
6
6
162
162
162
5
4
4
33
33
33
5
5
33
33
33
0
0
0
0
0.35
0.35
0.18
0.35
2
6
8
1
4
5
9
3
0
0
V
0.35
0.18
V
2
5
V
4
1
V
X
X
X
X
X
X
X
X
X
X
Details
0
0
0
0
0
0
0
0
0
0
0
X
X
X
X
X-Sections
Bogs
Fens
Wetland annotation
Fresh water marshes
Tidal saltwater marshes
Tidal freshwater marsh
Pocosins
Vernal pools, playas, prairie potholes, wet meadows, and wet prairies
Riparian forested wetlands
Sloughs
Swamps
X
X
X
X
Elevations
4
7
7
7
Profiles
2
4
4
4
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Utilities Plan
0.35
0.50
0.50
0.50
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Airfield Plan
0
4
6
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
5
23
2
2
2
5
5
22
4
4
2
2
3
7
4
4
5
V
4
2
0
3
V
Navigation/Dredging Plan
7
7
7
7
6
122
3
3
3
6
6
22
2
2
3
3
1
4
2
2
6
V
2
3
7
1
V
Site Plan
0.50
0.50
0.50
0.50
0.35
0.35
0.25
0.25
0.25
0.35
0.35
0.35
0.35
0.35
0.25
0.25
0.25
0.35
0.35
0.35
0.35
0.18
0.35
0.18
0.25
0.18
0.50
Eco-Restoration Plan
MicroStation Color #
LIQPET
NTGASN
SSWAF
STRAF
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
Level/Layer Description
Subsurface utilities liquid fuel breakline
Subsurface utilities natural gas breakline
Subsurface utilities sanitary sewer breakline
Subsurface utilities storm sewer breakline
Boring locations and text
Coordinate grid text annotation
Latitude and longitude grid ticks
State Plane coordinate ticks
UTM coordinate ticks
DTM obscure area boundary
DTM points
DTM triangles
Major contours
Major contours - annotation
Minor contours
Minor contours - annotation
Application generated shapes/lines
Shorelines, land features, and references
Cut/fill slopes
Cut/fill slope, top/toe slope annotation
Top/toe slopes
Soundings and overbanks
Spot elevations
Surface perimeter
Surface feature points
Surface void region
Water level reference (LWRP, after-grading LWRP, SWL, etc.)
Grading Plan
AutoCAD Color #
AIA Format
C-TOPO-BKLN-FUEL
C-TOPO-BKLN-NGAS
C-TOPO-BKLN-SSWR
C-TOPO-BKLN-STRM
C-TOPO-BORE
C-TOPO-COOR
C-TOPO-COOR-LALO
C-TOPO-COOR-STAT
C-TOPO-COOR-UTM~
C-TOPO-DTMO
C-TOPO-DTMP
C-TOPO-DTMT
C-TOPO-MAJR
C-TOPO-MAJR-IDEN
C-TOPO-MINR
C-TOPO-MINR-IDEN
C-TOPO-SHAP
C-TOPO-SHOR
C-TOPO-SLOP-FILL
C-TOPO-SLOP-IDEN
C-TOPO-SLOP-TOPT
C-TOPO-SOUN
C-TOPO-SPOT
C-TOPO-SURF-PERI
C-TOPO-SURF-PONT
C-TOPO-SURF-VOID
C-TOPO-WATR
Airfield Traffic Areas
C-TRAF-IDEN
C-TRAF-TYPA
C-TRAF-TYPB
C-TRAF-TYPC
Wetlands
C-WETL-BOGS
C-WETL-FENS
C-WETL-IDEN
C-WETL-MRSH
C-WETL-MRSH-SALT
C-WETL-MRSH-TIDL
C-WETL-PCSN
C-WETL-PHOL
C-WETL-RPRN
C-WETL-SLGH
C-WETL-SWMP
Elevations
C-ELEV-IDEN
C-ELEV-OTLN
C-ELEV-PATT
C-ELEV-SIGN
Sections
C-SECT-IDEN
C-SECT-MBND
C-SECT-MCUT
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A31
Discipline: Civil
Model File Layers/Levels
Details
X-Sections
Elevations
Profiles
Utilities Plan
Airfield Plan
Navigation/Dredging Plan
Eco-Restoration Plan
0.18
Grading Plan
Site Plan
MicroStation Color #
AutoCAD Color #
Level/Layer Description
Textures and hatch patterns
AIA Format
C-SECT-PATT
Details
C-DETL-GRPH
Graphic Defaults
Line Style
Level/Layer Naming
X
X
A32
Discipline: Landscape
Model File Layers/Levels
Level/Layer Naming
AutoCAD Color #
MicroStation Color #
Landscape Plan
Irrigation Plan
Details
Line Style
AIA Format
Level/Layer Description
General Information
Witness/extension lines, dimension terminators, dimension text
L-ANNO-DIMS
L-ANNO-KEYN
Reference keynotes with associated leaders
L-ANNO-NOTE
General notes and general remarks
L-ANNO-NPLT
Non-plotting graphic information
L-ANNO-PATT
Patterning, poche, shading, and hatching
L-ANNO-RDME
Read-me information
L-ANNO-REFR
Reference files and raster attachments
Miscellaneous symbols
L-ANNO-SYMB
Miscellaneous text and callouts with associated leaders
L-ANNO-TEXT
Irrigation System
Irrigation coverage, spray distribution patterns
L-IRRG-COVR
L-IRRG-EQPM
Equipment (e.g., controllers, valves, RPBPs, etc.)
L-IRRG-HEAD
Irrigation heads, bubblers, and drip irrigation emitters
L-IRRG-IDEN
Annotation
L-IRRG-PIPE
Piping
L-IRRG-SPKL
Sprinklers
Plant and Landscape Material
L-PLNT-BEDS
Planting beds (perennial and annual beds)
L-PLNT-BUSH
Bushes and shrubs (e.g., evergreen, deciduous, etc.)
L-PLNT-BUSH-LINE Bush and shrub line
L-PLNT-CTNR
Containers or planters
L-PLNT-GCVR
Groundcover and vines
L-PLNT-IDEN
Annotation
L-PLNT-MLCH
Mulches - organic and inorganic
L-PLNT-PLNT
Planting plants (e.g., ornamental annuals and perennials)
L-PLNT-SHAD
Shadow areas
L-PLNT-SPRG
Sprigs
L-PLNT-TREE
Trees (e.g., evergreen, deciduous, etc.)
L-PLNT-TREE-LINE Tree line
L-PLNT-TURF
Lawn areas (turfing limits)
Site Improvements
L-SITE-BRDG
Bridges (pedestrian)
L-SITE-DECK
Decks
L-SITE-FENC
Fencing
L-SITE-FURN
Furnishings
L-SITE-IDEN
Annotation
L-SITE-PLAY
Play structures
L-SITE-POOL
Pools and spas
L-SITE-ROCK
Boulders and cobble
L-SITE-RTWL
Retaining walls
L-SITE-SPRT
Sports fields
L-SITE-SWLK
Sidewalks and steps
Detail Information
L-DETL-GRPH
Graphics, gridlines, non-text items
Graphic Defaults
0
0
0
0
V
0
NA
V
0
V
V
0.35
0.18
0.18
0.18
NA
V
V
V
V
2
5
8
5
NA
6
V
V
V
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
LAWNSP
0
0.18
0.35
0.25
0.35
0.35
0.35
5
6
1
2
6
6
1
5
3
4
5
5
0
0
0
0
0
0
0
0
0
0
0
TREEL
0
0.35
0.50
0.50
0.25
0.35
0.35
0.25
0.50
0.18
0.25
0.50
0.50
0.50
6
83
83
1
82
6
3
83
5
3
83
83
23
5
42
42
3
18
5
2
42
1
2
42
42
46
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
FENCE
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.50
0.35
0.35
0.35
0.25
0.50
0.35
V
22
232
2
4
6
2
162
1
4
2
V
22
107
4
7
5
4
33
3
7
4
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A33
Discipline: Structural
Model File Layers/Levels
Graphic Defaults
V
V
2
5
8
5
NA
6
V
V
V
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.25
0.35
0.35
0.35
0.35
0.35
0.35
21
22
132
30
32
162
83
83
133
135
42
30
22
103
86
102
33
42
42
111
127
182
Alignments
0.25
0
0
0
0
0.25
0.25
0.25
0.25
143
122
143
143
191
23
191
191
Beam centerlines
Continuous beam or primary beam of two-way beam system
Beam rebar
Girders or secondary beams of two-way beam system
7
0
0
0
0.25
0.50
0.70
0.35
214
211
5
212
117
109
1
101
X
X
X
X
X
X
X
X
Diagonal bracing
Horizontal bracing
Vertical bracing
0
0
0
0.35
0.35
0.35
161
161
144
25
25
199
X
X
X
X
X
X
Abutments
Abutment rebar
Bridge bearing
Bridge bearing centerlines
Bent cap
Centerline of bents
Bent cap rebar
Curbs/sidewalks on structure
0
0
0
7
0
7
0
0
0.50
0.70
0.35
0.25
0.35
0.25
0.70
0.35
83
5
152
214
3
214
5
2
42
1
88
117
2
117
1
4
X
X
X
X
X
X
X
Details
V
V
0.35
0.18
0.18
0.18
NA
V
V
Sections
X
X
0
0
0
0
0
0
NA
V
0
Level/Layer Description
3D Alignment
Dams
X
X
Decks
X
X
X
X
X
X
X
X
X
Substructure
X
X
X
X
X
X
X
X
X
Column Plan
X
X
X
X
X
X
X
X
X
Framing Plan
X
X
X
X
X
X
X
X
X
Foundation Plan
X
X
X
X
X
X
X
X
X
MicroStation Color #
X
X
X
X
X
X
X
X
X
AutoCAD Color #
Locks
Hydraulic Structures
AIA Format
General Information
S-ANNO-DIMS
S-ANNO-KEYN
S-ANNO-NOTE
S-ANNO-NPLT
S-ANNO-PATT
S-ANNO-RDME
S-ANNO-REFR
S-ANNO-SYMB
S-ANNO-TEXT
Access
S-ACCS-ADIT
S-ACCS-CHAM
S-ACCS-EVTR
S-ACCS-GLRY
S-ACCS-HTCH
S-ACCS-LADD
S-ACCS-MHOL
S-ACCS-MISC
S-ACCS-STRS
S-ACCS-STRS-FRMG
S-ACCS-TUNL
Alignment
S-ALGN-LINE
Armor
S-ARMR-CRNR
S-ARMR-LINR
S-ARMR-MISC
S-ARMR-WALL
Beams
S-BEAM-CNTR
S-BEAM-PRIM
S-BEAM-RBAR
S-BEAM-SECD
Bracing
S-BRCG-DIA~
S-BRCG-HORZ
S-BRCG-VERT
Bridges
S-BRDG-ABUT
S-BRDG-ABUT-RBAR
S-BRDG-BEAR
S-BRDG-BEAR-CNTR
S-BRDG-BENT
S-BRDG-BENT-CNTR
S-BRDG-BENT-RBAR
S-BRDG-CURB
Bridges
Line Style*
Vertical Const
Superstructure
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A34
Discipline: Structural
Model File Layers/Levels
Graphic Defaults
22
5
101
1
5
62
1
22
1
186
3
1
116
3
0.35
21
30
0
0
0
0
0.25
0.25
0.25
0.25
233
241
241
232
115
179
179
107
X
X
X
X
X
X
X
X
0
0
0
0.25
0.25
0.25
30
13
13
86
35
35
X
X
X
X
X
X
0
0
7
0
0
0
0
0
0
0
0
0.35
0.35
0.25
0.25
0.35
0.70
0.50
0.35
0.35
0.50
0.35
42
42
44
43
42
5
52
52
41
72
40
182
182
198
206
182
1
36
36
190
196
166
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
0.35
0.70
0.25
0.25
0.70
0.25
0.25
Sections
0
0
0
2
0
0
0
3D Alignment
166
74
2
1
34
Dams
40
87
3
5
84
Locks
0.25
0.35
0.35
0.70
0.35
Superstructure
7
0
0
0
0
Decks
1
1
22
2
220
180
117
247
42
101
Substructure
5
5
22
3
75
70
214
112
83
212
Column Plan
0.35
0.70
0.25
0.25
0.35
0.35
0.25
0.35
0.50
0.35
Framing Plan
MicroStation Color #
0
0
0
0
0
0
7
0
0
0
Foundation Plan
AutoCAD Color #
Hydraulic Structures
AIA Format
Level/Layer Description
S-BRDG-DIAP
Diaphragms
S-BRDG-DIAP-RBAR Diaphragm rebar
S-BRDG-DRNS
Drains
S-BRDG-FENC
Fencing rails, fabric, supports, and gates
S-BRDG-FEND
Fenders
S-BRDG-GIRD
Girders
S-BRDG-GIRD-CNTR Girder centerline
S-BRDG-HEAD
Headers
S-BRDG-PIER
Piers
S-BRDG-STRG
Stringers
Columns
S-COLS-CNTR
Column centerlines/working lines
S-COLS-POST
Short columns
S-COLS-PRIM
Primary columns
S-COLS-RBAR
Column rebar
S-COLS-SECD
Secondary columns
Decking
S-DECK-BRDG
Bridge deck
S-DECK-BRDG-RBAR Bridge deck rebar
S-DECK-FLOR
Floor deck
S-DECK-FLOR-OPNG Floor deck openings
S-DECK-RBAR
Deck rebar
S-DECK-ROOF
Roof deck
S-DECK-ROOF-OPNG Roof deck openings
Equipment Pads and Foundations
S-EQPM-PADS
Equipment pads
Erosion Control
S-EROS-BARR
Vapor/capillary water barriers
Gabions
S-EROS-GABN
Slope paving
S-EROS-PVMT
Riprap, stone protection, jetties, breakwaters
S-EROS-RRAP
Fasteners & Connections
S-FSTN-ABLT
Anchor bolts
S-FSTN-MISC
Fasteners and connections (non-specific)
S-FSTN-PL~~
Connection plates (shear plates, gusset plates, etc.
Foundation
Anchor piles, blocks, strands, deadmen, soil/rock anchors
S-FNDN-ANCH
S-FNDN-BLRD
Bollards, bollard foundations
S-FNDN-CNTR
Foundation centerlines
S-FNDN-DRNS
Foundation drainage features and objects
S-FNDN-FTNG
Footings
S-FNDN-FTNG-RBAR Footing rebar
S-FNDN-GRBM
Grade beams
S-FNDN-PCAP
Pile caps
S-FNDN-PEDS
Foundation pedestals/pads
S-FNDN-PIER
Piers, drilled shafts, caissons
S-FNDN-PILE
Piles
Bridges
Line Style*
Vertical Const
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A35
Discipline: Structural
Model File Layers/Levels
Graphic Defaults
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
Sections
3D Alignment
86
86
25
117
1
101
35
86
35
35
35
35
1
220
1
1
86
1
33
5
5
5
5
5
5
109
103
1
1
1
183
1
1
1
1
1
88
86
86
116
88
88
X
X
X
X
30
30
161
214
5
212
13
30
13
13
13
13
5
75
5
5
30
5
162
6
6
6
6
6
6
211
132
5
5
5
142
5
5
5
5
5
152
30
30
62
152
152
X
X
X
X
0.25
0.25
0.35
0.25
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.25
0.25
0.35
0.25
0.35
0.35
0.35
0.35
X
X
X
X
0
0
0
7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Dams
X
X
X
X
Locks
35
36
28
182
Hydraulic Structures
Superstructure
13
52
51
42
Substructure
0.25
0.35
0.35
0.35
Bridges
Column Plan
Foundation Plan
0
0
0
0
Framing Plan
MicroStation Color #
Gate anchorages
Dead man anchorage
Arm
Gate axis and centerlines
Bulkhead
Bulkhead needles beam
Bulkhead needles
Gate connects, links
Diagonals, gussets, sleeve nut
Diagonal channels
Diagonal gusset plate
Diagonal gusset plate support
Diaphragms
Gate fenders
Flange
Downstream flange
Girder flange
Upstream flange
Girder web plates
Gudgeon
Gudgeon hood
Gudgeon hub
Gudgeon pin
Gudgeon (hood) stiffener
Gudgeon (pin) support
Horizontal rolled shapes
Intercostals
Gate jack
Gate jack - horizontal
Gate jack - vertical
Lifting mechanism
Latching device
Latching device - bottom
Latching device - top
Lubrication system
Gates incidental to structure
Miter guide assembly
Gate pins
Pintle ball, bushing & base
Pintle casting
Quoin
Quoin flange
AutoCAD Color #
Level/Layer Description
Column base plates
Ribbed mat foundation
Foundation treatment (grouting)
Service tunnel/duct banks
AIA Format
S-FNDN-PL~~
S-FNDN-RIBS
S-FNDN-TRMT
S-FNDN-TUNL
Gates
S-GATE-ANCH
S-GATE-ANCH-DEAD
S-GATE-ARMS
S-GATE-AXIS
S-GATE-BLKH
S-GATE-BLKH-NDLB
S-GATE-BLKH-NDLS
S-GATE-CONN
S-GATE-DIA~
S-GATE-DIA~-CHAN
S-GATE-DIA~-GUST
S-GATE-DIA~-SUPT
S-GATE-DIAP
S-GATE-FEND
S-GATE-FLNG
S-GATE-FLNG-DNST
S-GATE-FLNG-GIRD
S-GATE-FLNG-UPST
S-GATE-GIRD-WEB~
S-GATE-GUDG
S-GATE-GUDG-HOOD
S-GATE-GUDG-HUB~
S-GATE-GUDG-PIN~
S-GATE-GUDG-STIF
S-GATE-GUDG-SUPT
S-GATE-HORZ
S-GATE-ICST
S-GATE-JACK
S-GATE-JACK-HORZ
S-GATE-JACK-VERT
S-GATE-LIFT
S-GATE-LTCH
S-GATE-LTCH-BOTM
S-GATE-LTCH-TOP~
S-GATE-LUBE
S-GATE-MISC
S-GATE-MITR-ASSY
S-GATE-PIN~
S-GATE-PNTL
S-GATE-PNTL-CAST
S-GATE-QOIN
S-GATE-QOIN-FLNG
Line Style*
Vertical Const
Decks
Level/Layer Naming
X
X
X
X
X
X
X
X
A36
Discipline: Structural
Model File Layers/Levels
Graphic Defaults
6
6
6
6
5
5
5
5
Axis of structure
Baffle blocks, splash pads
Stilling and settling basins
Channel (Does not include earthen structures)
Cofferdam
Diversionary/bypass conduits and culverts
Dam
Fish ladder or passage
Flume
Intake, outlet
Non-overflow structures
Penstock outline and features
4
0
0
0
0
0
0
0
0
0
0
0
0.18
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
202
122
122
122
42
122
122
122
122
122
122
122
21
23
23
23
182
23
23
23
23
23
23
23
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
0.18
0.25
0.18
0.25
X
X
X
X
X
Sections
7
0
7
0
X
X
X
X
X
3D Alignment
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
110
102
25
X
X
X
X
X
X
31
32
161
0.25
0.35
0.25
Dams
3
0
0
Locks
Existing ground
Finished grade
Water surface
Hydraulic Structures
Superstructure
88
88
88
88
88
88
107
107
107
183
183
1
1
1
182
179
23
5
21
199
103
103
103
103
33
Substructure
152
152
152
152
152
152
232
232
232
142
142
5
5
5
42
241
122
6
202
144
132
132
132
132
162
Bridges
Column Plan
MicroStation Color #
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.25
0.35
0.35
0.35
0.35
0.25
0.25
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
Framing Plan
AutoCAD Color #
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Level/Layer Description
Quion, miter
Quoin stiffener
Quoin thrust plate
Quoin, wall
Quoin web
Rails and guides
Gate seal
Gate seal - horizontal
Gate seal - vertical
Gate shoe
Skin plates
Stiffener
Stiffener - longitudinal
Stiffener - transverse
Stoplogs
Thimble
Thrust plate
Trunion
Valves (general shape)
Rolled vertical shapes
Walkway
Walkway - framing
Walkway - grating
Walkway - support
Web
Foundation Plan
AIA Format
S-GATE-QOIN-MITR
S-GATE-QOIN-STIF
S-GATE-QOIN-TRST
S-GATE-QOIN-WALL
S-GATE-QOIN-WEB~
S-GATE-RAIL
S-GATE-SEAL
S-GATE-SEAL-HORZ
S-GATE-SEAL-VERT
S-GATE-SHOE
S-GATE-SKIN
S-GATE-STIF
S-GATE-STIF-LONG
S-GATE-STIF-TRAN
S-GATE-STOP
S-GATE-THBL
S-GATE-TRST
S-GATE-TRUN
S-GATE-VALV
S-GATE-VERT
S-GATE-WALK
S-GATE-WALK-FRMG
S-GATE-WALK-GRTG
S-GATE-WALK-SUPT
S-GATE-WEB~
Grade Lines
S-GRLN-SURF-E
S-GRLN-SURF-N
S-WATR-SURF
Grids
S-GRID-HORZ
S-GRID-HORZ-IDEN
S-GRID-VERT
S-GRID-VERT-IDEN
Hydraulic Features
S-HYDR-AXIS
S-HYDR-BAFL
S-HYDR-BASN
S-HYDR-CHAN
S-HYDR-COFF
S-HYDR-COND
S-HYDR-DAM~
S-HYDR-FISH
S-HYDR-FLUM
S-HYDR-INTK
S-HYDR-NOVR
S-HYDR-PENS
Line Style*
Vertical Const
Decks
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A37
Discipline: Structural
Model File Layers/Levels
Graphic Defaults
0
0
0
0
0
0
0.35
0.25
0.25
0.35
0.35
0.35
183
142
142
142
142
142
201
183
183
183
183
183
0.35
200
13
0
0
0
0.35
0.25
0.35
212
121
33
101
15
126
0
0
0
0.70
0.50
0.50
5
181
181
1
185
185
6
6
6
6
6
0.25
0.25
0.25
0.25
0.25
5
5
5
5
5
1
1
1
1
1
X
X
X
X
X
0
0
0
0
0
0
0.25
0.35
0.25
0.50
0.70
0.35
3
62
3
3
5
3
2
116
2
2
1
2
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Details
18
23
183
103
119
119
X
X
X
Sections
82
122
142
132
134
134
X
X
X
3D Alignment
0.35
0.50
0.35
0.35
0.35
0.35
X
X
X
X
0
0
0
0
0
0
X
X
X
23
23
39
246
189
122
122
124
111
221
Dams
0.25
0.25
0.25
0.25
0.25
Locks
0
0
0
0
0
Hydraulic Structures
Superstructure
39
23
23
Substructure
124
122
122
Bridges
Column Plan
MicroStation Color #
0.35
0.35
0.35
Framing Plan
AutoCAD Color #
0
0
0
Foundation Plan
AIA Format
Level/Layer Description
S-HYDR-STRC-POWR Powerhouse
S-HYDR-SWAY
Spillway
S-HYDR-WEIR
Weirs and sluiceways
Joints
Construction/lift joints - (Do not use when 3D modeling)
S-JNTS-CNTJ
Control/contraction joints (saw cut) - (Do not use when 3D modeling)
S-JNTS-CTLJ
Expansion joints, joint materials (e.g., felt) - (Do not use when 3D modeling)
S-JNTS-EXPJ
Stucco joints - (Do not use when 3D modeling)
S-JNTS-STUC
S-JNTS-WTRS
Waterstops
Joists
S-JOIS-BRGX
Bridging
S-JOIS-GIRD
Joist girders
S-JOIS-PERI
Perimeter channel or rim joist
S-JOIS-PRIM
Primary joists
S-JOIS-SECD
Secondary joists
S-JOIS-TRIM
Partial length or trimmer floor joist
Fabrications (metal or other specialty)
S-FABR-EMBD
Embedded metals (framing around openings)
S-FABR-HOIS
Hoist structures
S-FABR-HOOK
Line hooks, lifting hooks, check posts etc.
S-FABR-MOOR
Mooring bits, chocks, rings
S-FABR-PL~~
Plates
S-FABR-TRSH
Trash racks, intake screens
Pipes and Culverts
S-PIPE-CULV
Precast/manufactured culverts
Platforms
S-PLAT-FRMG
Platform frame/stringers
S-PLAT-GRTG
Platform grating (add a second minor group to indicate platform # or elev)
S-PLAT-WALK
Platform walkway
Reinforcement
Steel reinforcing, welded wire fabric
S-REIN-RBAR
S-REIN-TEND-HORZ Horizontal Tendons
S-REIN-TEND-VERT Vertical Tendons
Reference Outlines
Building outline
S-OTLN-BLDG
Floor outline
S-OTLN-FLOR
Openings
S-OTLN-OPNG
Roof
S-OTLN-ROOF
S-OTLN-STRC
Misc. structures
Safety Features
S-SAFE-FENC
Fencing rails, fabric, supports, and gates
Guardrails
S-SAFE-GRAL
Handrails, railings
S-SAFE-HRAL
S-SAFE-PRPT
Parapet/jersey barrier
S-SAFE-PRPT-RBAR Parapet/jersey barrier rebar
S-SAFE-WATR
Waterway safety barriers
Signs
Line Style*
Vertical Const
Decks
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A38
Discipline: Structural
Model File Layers/Levels
Graphic Defaults
3
3
2
2
X
X
X
X
Truss bridging
Primary trusses
Secondary trusses
0
0
0
0.35
0.50
0.35
82
4
6
18
7
5
X
X
X
X
X
X
Abutments
Cell
Cutoff wall
Curtain/breast wall
Wall going to the top of the structure
Guard/guide walls
Load bearing walls
Wall monoliths
Mechanically stabilized earth (MSE) wall
Non-load bearing walls
Pre-cast concrete walls
Wall that does not reach to the top of the structure
Wall rebar
Retaining wall (flood walls, wingwalls, etc.)
Shear walls
Stud walls
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.70
0.35
0.35
0.35
83
53
30
72
3
72
3
3
72
72
126
72
5
72
101
42
42
44
86
196
2
196
2
2
196
196
55
196
1
196
186
182
Dolphins (associated with but not part of bridges, locks and guidewalls)
Fenders
Mooring cells
0
0
0
0.35
0.35
0.35
122
75
142
23
220
183
0
0
V
0.35
0.18
V
2
5
V
4
1
V
Details
0.35
0.35
Sections
0
0
3D Alignment
Stiffeners - longitudinal
Stiffeners - transverse
190
1
190
3
1
190
190
41
5
41
1
5
41
41
0.35
0.70
0.35
0.25
0.70
0.35
0.35
Dams
0
0
0
2
0
0
0
Superstructure
Approach slab
Approach slab rebar
Edge of slab
Openings (and depressions)
Slab rebar
Second pour, slab cap
Sill
Decks
187
101
2
107
107
1
181
Substructure
242
212
3
232
232
5
222
Column Plan
0.35
0.35
0.35
0.35
0.35
0.35
0.35
Framing Plan
MicroStation Color #
0
0
0
0
0
0
0
Level/Layer Description
Sign buoys
Extrusions
Framing and connections
Staff gages
Sign panels
Supports
Signage text
Foundation Plan
AutoCAD Color #
Hydraulic Structures
AIA Format
S-SIGN-BUOY
S-SIGN-EXTN
S-SIGN-FRMG
S-SIGN-GAGE
S-SIGN-PANL
S-SIGN-SPRT
S-SIGN-TEXT
Slabs
S-SLAB-APPR
S-SLAB-APPR-RBAR
S-SLAB-EDGE
S-SLAB-OPNG
S-SLAB-RBAR
S-SLAB-SECD
S-SLAB-SILL
Stiffeners
S-STIF-LONG
S-STIF-TRAV
Trusses
S-TRUS-BRGX
S-TRUS-PRIM
S-TRUS-SECD
Walls
S-WALL-ABUT
S-WALL-CELL
S-WALL-COFF
S-WALL-CURT
S-WALL-FULL
S-WALL-GARD
S-WALL-LOAD
S-WALL-MONO
S-WALL-MSE~
S-WALL-NONL
S-WALL-PCST
S-WALL-PRHT
S-WALL-RBAR
S-WALL-RTWL
S-WALL-SHEA
S-WALL-STUD
Waterway Specialties
S-WWAY-DLPH
S-WWAY-FEND
S-WWAY-MOOR
Sections
S-SECT-IDEN
S-SECT-MBND
S-SECT-MCUT
Bridges
Line Style*
Vertical Const
Locks
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A39
Discipline: Structural
Model File Layers/Levels
Graphic Defaults
Details
Sections
3D Alignment
Dams
Locks
Hydraulic Structures
Superstructure
Substructure
Bridges
Column Plan
0.18
Framing Plan
Foundation Plan
MicroStation Color #
AutoCAD Color #
Level/Layer Description
Textures and hatch patterns
AIA Format
S-SECT-PATT
Details
S-DETL-GRPH
Line Style*
Vertical Const
Decks
Level/Layer Naming
X
X
A40
Discipline: Architectural
Model File Layers/Levels
AutoCAD Color #
MicroStation Color #
Floor Plan
Roof Plan
Equipment Plan
Elevations
Sections
Details
AIA Format
General Information
A-ANNO-DIMS
A-ANNO-KEYN
A-ANNO-MASK
A-ANNO-NOTE
A-ANNO-NPLT
A-ANNO-PATT
A-ANNO-RDME
A-ANNO-REFR
A-ANNO-SYMB
A-ANNO-TEXT
Area Information
A-AREA-IDEN
A-AREA-LINE
A-AREA-OCCP
A-AREA-PATT
Barrier
A-BARR-AIR~
Ceiling Information
A-CLNG-ACCS
A-CLNG-CTLJ
A-CLNG-GRID
A-CLNG-LITE
A-CLNG-OPNG
A-CLNG-PATT
A-CLNG-SFFT
A-CLNG-SUSP
A-CLNG-TEES
Columns
A-COLS-ENCL
Doors
A-DOOR-FULL
A-DOOR-IDEN
A-DOOR-PRHT
A-DOOR-SYMB
Equipment
A-EQPM-ACCS
A-EQPM-FIXD
A-EQPM-IDEN
A-EQPM-MOVE
A-EQPM-OVHD
Floor Information
A-FLOR-CSWK
A-FLOR-EVTR
A-FLOR-FIXT
A-FLOR-FTPT
A-FLOR-HRAL
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
V
0
NA
V
0
V
V
0.18
0.35
0.18
0.18
0.18
NA
V
V
V
V
113
2
5
8
5
NA
6
V
V
V
16
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0.35
0.50
0.35
0.18
2
4
2
8
4
7
4
9
Air barrier
0.25
Access panels
Ceiling control joints
Ceiling grid
Specialty ceiling lights not shown on the Electrical Lighting Plan
Openings, ceiling/roof penetrations (see also A-FLOR-OVHD in Floor Plan model file)
Ceiling patterns
Soffits
Suspended elements, ceiling mounted specialties (e.g., clocks, fans, etc.)
Main tees
0
0
0
0
0
0
0
0
0
0.35
0.35
0.25
0.50
0.18
0.18
0.25
0.18
0.18
6
2
1
4
8
8
2
5
5
5
4
3
7
9
9
4
1
1
0.50
0
0
0
0
0.25
0.25
0.35
0.25
3
3
6
1
2
2
5
3
X
X
X
X
Equipment access
Fixed equipment
Equipment identification numbers
Moveable equipment
Overhead, ceiling mounted, or suspended equipment
0
0
0
0
0
0.35
0.50
0.35
0.35
0.35
6
4
6
6
6
5
7
5
5
5
0
0
0
0
0
0.25
0.35
0.25
0.70
0.25
3
2
201
4
1
2
4
29
7
3
Level/Layer Description
Witness/extension lines, dimension terminators, dimension text
Reference keynotes with associated leaders
Text/shape mask for use with photo backgrounds
General notes and general remarks
Non-plotting graphic information
Patterning, poche, shading, and hatching
Read-me information
Reference files and raster attachments
Miscellaneous symbols
Miscellaneous text and callouts with associated leaders
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A41
Discipline: Architectural
Model File Layers/Levels
0
0
0
0
0.25
0.35
0.25
0.18
1
3
1
5
3
2
3
1
X
X
X
X
0
0
0
0
0
0
0
0
0
2
0
0
0
0.25
0.25
0.18
0.18
0.18
0.18
0.35
0.18
0.35
0.18
0.25
0.18
0.25
1
1
5
8
5
5
6
8
2
8
3
5
3
3
3
1
9
1
1
5
9
4
9
2
1
2
0
7
0
0
0
0
0
0
0
0
0
0
INBATT
0
0
0.18
0.25
0.25
0.35
0.35
0.25
0.25
0.35
0.25
0.18
0.18
0.25
0.18
0.25
0.25
8
5
1
2
2
3
1
3
1
5
5
1
8
1
1
9
1
3
4
4
2
3
2
3
1
1
3
9
3
3
Details
Full height glazed walls and partitions (see A-WALL-CURT for curtain walls)
Window number and symbol
Windows and partial height glazed partitions
Window sills
Sections
X
X
X
X
X
X
X
X
X
X
X
X
Elevations
2
5
2
9
9
4
2
3
2
3
3
2
3
6
3
8
8
2
3
1
3
1
1
3
Equipment Plan
Floor Plan
0.35
0.35
0.35
0.18
0.18
0.35
0.25
0.25
0.25
0.25
0.25
0.25
Roof Plan
MicroStation Color #
0
0
0
2
0
0
0
0
0
0
0
0
Level/Layer Description
Room name, space identification text
Level changes, shafts, ramps, pits, breaks in construction, and depressions
Room/space identification number and symbol
Overhead items (overhangs, etc.)
Paving, tile, carpet patterns
Room perimeter shape (interior walls)
Access (raised) flooring
Signage
Architectural specialties (e.g., toilet room accessories, display cases)
Stair risers/treads, escalators, ladders
Toilet partitions
Architectural woodwork (field built cabinets and counters)
AutoCAD Color #
AIA Format
A-FLOR-IDEN
A-FLOR-LEVL
A-FLOR-NUMB
A-FLOR-OVHD
A-FLOR-PATT
A-FLOR-PERI
A-FLOR-RAIS
A-FLOR-SIGN
A-FLOR-SPCL
A-FLOR-STRS
A-FLOR-TPTN
A-FLOR-WDWK
Windows
A-GLAZ-FULL
A-GLAZ-IDEN
A-GLAZ-PRHT
A-GLAZ-SILL
Roof Information
A-ROOF-CRKT
A-ROOF-DRNS
A-ROOF-EXPJ
A-ROOF-GUTR
A-ROOF-HRAL
A-ROOF-LEVL
A-ROOF-OTLN
A-ROOF-PATT
A-ROOF-PRPT
A-ROOF-SKLT
A-ROOF-SPCL
A-ROOF-STRS
A-ROOF-WALK
Walls
A-WALL-CAVI
A-WALL-CNTR
A-WALL-CURT
A-WALL-FIRE
A-WALL-FULL-EXTR
A-WALL-FULL-INTR
A-WALL-HEAD
A-WALL-IDEN
A-WALL-JAMB
A-WALL-MESH
A-WALL-MOVE
A-WALL-OPNG-LVRS
A-WALL-PATT
A-WALL-PRHT
A-WALL-SPCL
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A42
Discipline: Architectural
Model File Layers/Levels
0.35
0.18
V
0.18
2
5
V
8
4
1
V
9
Details
0
0
V
0
Sections
Elevations
4
7
9
2
4
8
Equipment Plan
0.35
0.50
0.18
Roof Plan
0
0
0
MicroStation Color #
Floor Plan
Level/Layer Description
AutoCAD Color #
AIA Format
Elevations
A-ELEV-IDEN
A-ELEV-OTLN
A-ELEV-PATT
Sections
A-SECT-IDEN
A-SECT-MBND
A-SECT-MCUT
A-SECT-PATT
Detail Information
A-DETL-GRPH
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
A43
Discipline: Interiors
Model File Layers/Levels
AutoCAD Color #
MicroStation Color #
Furniture Plan
Floor Patterns
Elevations
Details
AIA Format
Level/Layer Description
General Information
Witness/extension lines, dimension terminators, dimension text
I-ANNO-DIMS
I-ANNO-KEYN
Reference keynotes with associated leaders
I-ANNO-NOTE
General notes and general remarks
I-ANNO-NPLT
Non-plotting graphic information
I-ANNO-PATT
Patterning, poche, shading, and hatching
I-ANNO-RDME
Read-me information
I-ANNO-REFR
Reference files and raster attachments
Miscellaneous symbols
I-ANNO-SYMB
I-ANNO-TEXT
Miscellaneous text and callouts with associated leaders
Carpet/Carpet Tile
I-CRPT-ROLL-ACNT Carpet (roll goods) - accent color
I-CRPT-ROLL-FILD Carpet (roll goods) - field color
I-CRPT-TILE-ACN1 Carpet tile - accent color
I-CRPT-TILE-ACN2 Carpet tile - accent color
I-CRPT-TILE-FILD Carpet tile - field color
Equipment
I-EQPM-ACCS
Equipment access
I-EQPM-CHLD
Child development (play toys, teaching rugs, play forms)
I-EQPM-COPY
Copiers, fax machines, office equipment
I-EQPM-FIXD
Fixed equipment
I-EQPM-IDEN
Equipment identification numbers
I-EQPM-MEDI
Medical (exam beds, dental chairs, etc.)
I-EQPM-MOVE
Moveable equipment
I-EQPM-OVHD
Overhead, ceiling mounted, and suspended equipment
I-EQPM-STOR
Storage equipment
Signage
I-FLOR-SIGN
Signage
Flooring Items and Materials
I-FLRG-CONC
Concrete flooring
I-FLRG-MATS
Entrance mat components and frames
I-FLRG-STON
Stone flooring
I-FLRG-TRAN
All floor thresholds and transition moldings
I-FLRG-WOOD
Wood parquet tile or planks
Furnishings
I-FURN-ACCS
Accessories (vestibule matts, partitions, draperies, clocks, trash cans, lecturns, lamps, etc.)
I-FURN-ADPC
Automated Data Processing Components
I-FURN-ARTW
Artwork
I-FURN-FLOR
Flooring (carpet, rugs, etc.)
I-FURN-FREE
Free-standing furnishings (desks, beds, tables, dressers, credenzas, casegoods)
I-FURN-GRID
Planning grid/modular outline
I-FURN-IDEN
Furniture code identification
I-FURN-PLNT
Plants
I-FURN-SEAT
Seating (chairs, sofas, etc.)
I-FURN-STOR
File cabinets, high density storage, shelving, storage cabinets
Monolithic (Poured or Broadcast) Flooring
I-MONO-SRFL-ACNT Seamless resinous flooring - accent color
I-MONO-SRFL-FILD Seamless resinous flooring - field color
I-MONO-TERR-ACN1 Terrazzo - accent color
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
V
0
NA
V
0
V
V
0.35
0.18
0.18
0.18
NA
V
V
V
V
2
5
8
5
NA
6
V
V
V
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
V
V
V
V
V
1
60
208
236
204
3
100
69
139
37
2
0
0
0
0
0
2
0
0
0.18
0.35
0.35
0.18
0.25
0.35
0.18
0.25
0.35
8
2
2
5
1
2
5
3
2
9
4
4
1
3
4
1
2
4
0.35
0
0
0
0
0
V
V
V
V
V
8
4
153
5
22
9
7
104
1
22
0
0
0
0
0
0
0
0
0
0
0.25
0.35
0.35
0.35
0.35
0.50
0.25
0.25
0.35
0.35
1
2
2
2
6
4
3
3
2
2
3
4
4
4
5
7
2
2
4
4
0
0
0
V
V
V
203
9
144
45
14
199
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A44
Discipline: Interiors
Model File Layers/Levels
156
163
X
X
0
0
V
V
190
241
245
179
X
X
Furniture
Code identification components
Code identification panels
Lighting components
Patterns
Panels
Power, communication components
Storage components
System furniture partition walls
Work surface components
0
0
0
0
0
0
0
0
0
0
0.35
0.25
0.25
0.50
0.18
0.35
0.50
0.35
0.35
0.35
2
1
1
4
8
2
4
2
2
2
4
3
3
7
9
4
7
4
4
4
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
153
124
236
60
78
9
128
2
30
209
20
144
67
221
239
203
115
89
104
39
139
100
244
14
71
4
86
93
6
199
156
189
163
45
48
90
0
0
0
0.25
0.50
0.18
1
4
5
3
7
1
Details
67
239
Floor Patterns
V
V
Elevations
MicroStation Color #
0
0
Level/Layer Description
Terrazzo - accent color
Terrazzo - field color
Furniture Plan
AutoCAD Color #
AIA Format
I-MONO-TERR-ACN2
I-MONO-TERR-FILD
Resilient Flooring
I-SHTP-ACNT
I-SHTP-FILD
System Furniture
I-SYST-FURN
I-SYST-IDEN
I-SYST-IDPL
I-SYST-LITE
I-SYST-PATT
I-SYST-PNLS
I-SYST-POWR
I-SYST-STOR
I-SYST-WALL
I-SYST-WKSF
Tile
I-TILE-CERM-ACNT
I-TILE-CERM-FILD
I-TILE-LINO-ACNT
I-TILE-LINO-FILD
I-TILE-PORC-ACN1
I-TILE-PORC-ACN2
I-TILE-PORC-FILD
I-TILE-QUAR-ACNT
I-TILE-QUAR-FILD
I-TILE-RUBB-ACNT
I-TILE-RUBB-FILD
I-TILE-TERR-ACN1
I-TILE-TERR-ACN2
I-TILE-TERR-ACN3
I-TILE-TERR-FILD
I-TILE-VNYL-ACN1
I-TILE-VNYL-ACN2
I-TILE-VNYL-FILD
Elevations
I-ELEV-IDEN
I-ELEV-OTLN
I-ELEV-PATT
Detail Information
I-DETL-GRPH
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A45
AutoCAD Color #
MicroStation Color #
Details
AIA Format
Level/Layer Description
General Information
F-ANNO-DIMS
Witness/extension lines, dimension terminators, dimension text
F-ANNO-KEYN
Reference keynotes with associated leaders
F-ANNO-NOTE
General notes and general remarks
F-ANNO-NPLT
Non-plotting graphic information
F-ANNO-PATT
Patterning, poche, shading, and hatching
F-ANNO-RDME
Read-me information
F-ANNO-REFR
Reference files and raster attachments
Miscellaneous symbols
F-ANNO-SYMB
F-ANNO-TEXT
Miscellaneous text and callouts with associated leaders
Aqueous Film Forming Foam System
F-AFFF-EQPM
Equipment
F-AFFF-PIPE
Piping
CO2 Sprinkler System
F-CO2S-EQPM
Equipment
F-CO2S-PIPE
CO2 piping or CO2 discharge nozzle piping
Control Panels
F-CTRL-PANL
Control panels
Floor Information
F-FLOR-IDEN
Room name, space identification text (copied from Architectural - Floor Plan model file)
F-FLOR-NUMB
Room/space identification number and symbol (copied from Architectural - Floor Plan model file)
Halon System
F-HALN-EQPM
Equipment
F-HALN-PIPE
Piping
Inert Gas
F-IGAS-EQPM
Equipment
F-IGAS-PIPE
Piping
Means of Egress Lighting
F-LITE-EMER
Emergency fixtures
F-LITE-EXIT
Exit fixtures
Egress Requirements
F-LSFT-EGRE
Egress requirements designator
F-LSFT-OCCP
Occupant load for egress capacity
F-LSFT-TRVL
Maximum travel distances
Fire Protection System
F-PROT-ALRM-INDC Indicating appliances
F-PROT-ALRM-MANL Manual fire alarm pull stations
F-PROT-EXTI
Fire extinguishers
F-PROT-EXTI-CABN Fire extinguisher cabinets
F-PROT-HOSE
Fire hoses
F-PROT-HOSE-CABN Fire hose cabinets
F-PROT-RATE-DOOR Door fire ratings
F-PROT-RATE-WALL Wall fire ratings
F-PROT-SMOK
Smoke detectors and heat sensors
Smoke/Pressurization Control
F-SMOK-DMPR
Dampers
Sprinkler System
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
V
0
NA
V
0
V
V
0.35
0.18
0.18
0.18
NA
V
V
V
V
2
5
8
5
NA
6
V
V
V
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0.35
0.35
82
82
18
18
X
X
0
0
0.35
0.35
6
6
5
5
X
X
0.50
23
46
0
0
0.25
0.25
3
3
2
2
X
X
0
0
0.35
0.35
22
22
22
22
X
X
0
0
0.35
0.35
162
162
33
33
X
X
0
0
0.50
0.50
23
203
46
45
X
X
0
0
0
0.35
0.35
0.35
6
6
6
5
5
5
X
X
X
0
0
0
0
0
0
0
0
0
0.50
0.50
0.35
0.35
0.35
0.35
0.50
0.50
0.50
83
23
2
2
2
2
4
4
23
42
46
4
4
4
4
7
7
46
X
X
X
X
X
X
X
0.35
22
22
X
X
X
X
X
X
X
X
X
A46
122
122
4
122
23
23
7
23
X
X
X
X
0
0
FIRE
0
0.35
0.35
0.50
0.35
122
122
4
122
23
23
7
23
X
X
X
X
Details
0.35
0.35
0.50
0.35
MicroStation Color #
0
0
SPRINK
0
AutoCAD Color #
AIA Format
Level/Layer Description
F-SPKL-CLHD
Sprinkler - ceiling heads
F-SPKL-OTHD
Sprinkler - other heads
F-SPKL-PIPE
Sprinkler piping
F-SPKL-STAN
Standpipe system
Water Supply and Distribution
F-WATR-CONN
Fire department connections
F-WATR-HYDT
Hydrants
F-WATR-PIPE
Piping
F-WATR-PUMP
Fire pumps
Detail Information
F-DETL-GRPH
Graphics, gridlines, non-text items
Graphic Defaults
Line Style
Level/Layer Naming
A47
Discipline: Plumbing
Model File Layers/Levels
Details
Riser Diagrams
Piping
Piping Plan
P-LGAS-PIPE
MicroStation Color #
P-DOMW-RISR
Hot and cold water risers
Floor Information
P-FLOR-IDEN
Room name, space identification text (copied from Architectural - Floor Plan model file)
P-FLOR-NUMB
Room/space identification number and symbol (copied from Architectural - Floor Plan model file)
Graywater System
P-GRAY-EQPM
Equipment
P-GRAY-PIPE
Graywater piping
Laboratory Gas Piping
P-LGAS-EQPM
Equipment
AutoCAD Color #
AIA Format
Level/Layer Description
General Information
Witness/extension lines, dimension terminators, dimension text
P-ANNO-DIMS
P-ANNO-KEYN
Reference keynotes with associated leaders
P-ANNO-NOTE
General notes and general remarks
P-ANNO-NPLT
Non-plotting graphic information
P-ANNO-PATT
Patterning, poche, shading, and hatching
P-ANNO-RDME
Read-me information
P-ANNO-REFR
Reference files and raster attachments
Miscellaneous symbols
P-ANNO-SYMB
P-ANNO-TEXT
Miscellaneous text and callouts with associated leaders
Domestic Water System
P-DOMW-CPIP
Cold water piping
P-DOMW-EQPM
Hot and cold water equipment
P-DOMW-EQPM-ACCS Equipment access doors
P-DOMW-FPIP
Domestic filtered water piping
Hot water piping
P-DOMW-HPIP
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
V
0
NA
V
0
V
V
0.35
0.18
0.18
0.18
NA
V
V
V
V
2
5
8
5
NA
6
V
V
V
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
CLDWTR
0
0
0
HWTR,
HWTRR
2
0.50
0.70
0.35
0.50
123
7
82
83
31
0
18
42
X
X
X
X
0.50
113
16
0.25
0
0
0.25
0.25
3
3
2
2
X
X
0
GRAY
0.70
0.50
200
200
13
13
X
X
0
0.70
OXYGEN
,
NITROG,
0.50
HELIUM,
HYDRGN
,
24
38
23
46
CMPAIR
0
NITROG
NITOXI
OXYGEN
0
VACAIR
0.50
0.70
0.50
0.50
0.50
0.50
0.50
83
24
23
23
23
23
23
42
38
46
46
46
46
46
X
X
X
X
X
X
X
2
2
2
0.25
0.25
0.25
3
1
2
2
3
4
X
X
X
0
0
0.50
0.70
83
204
42
37
X
X
A48
Discipline: Plumbing
Model File Layers/Levels
0.35
0.50
0.50
0.50
6
203
203
203
5
45
45
45
X
X
X
X
STRAF 0.50
0,
0.50
ROOFDN
2
0.50
163
41
163
41
163
41
Details
0
SSWAF
2
VENT
Riser Diagrams
Piping Plan
P-STRM-RISR
Diagram Information
P-DIAG-GRPH
Detail Information
P-DETL-GRPH
Roof drains
MicroStation Color #
P-STRM-DRNS
AutoCAD Color #
AIA Format
Level/Layer Description
P-SSWR-DRNS
Floor drains, sinks, and cleanouts
P-SSWR-PIPE
Piping
P-SSWR-RISR
Sanitary risers
P-SSWR-VENT
Vent piping
Storm Drainage System
P-STRM-PIPE
Storm drain piping
Graphic Defaults
Line Style
Level/Layer Naming
X
X
A49
Discipline: Mechanical
Model File Layers/Levels
AutoCAD Color #
MicroStation Color #
HVAC Plan
Hydraulic Systems
Material Handling
Machine Design
Control Diagrams
Elevations
Sections
Details
AIA Format
Level/Layer Description
General Information
Witness/extension lines, dimension terminators, dimension text, weld symbols
M-ANNO-DIMS
M-ANNO-KEYN
Reference keynotes with associated leaders
M-ANNO-MASK
Text/shape mask for use with photo backgrounds
M-ANNO-NOTE
General notes and general remarks
M-ANNO-NPLT
Non-plotting graphic information (e.g., clearances and working space information)
M-ANNO-PATT
Patterning, poche, shading, and hatching
M-ANNO-RDME
Read-me information
M-ANNO-REFR
Reference files and raster attachments
Miscellaneous symbols
M-ANNO-SYMB
M-ANNO-TEXT
Miscellaneous text and callouts with associated leaders
Industrial Waste Piping
M-ACID-EQPM
Acid, alkaline, and oil waste equipment
M-ACID-PIPE
Acid, alkaline, and oil waste piping
M-ACID-VENT
Acid, alkaline, and oil waste vent piping
Anti-Freeze
M-AFRZ-EQPM
Anti-freeze equipment
M-AFRZ-SPLY-PIPE Anti-freeze supply piping
M-AFRZ-WAST-PIPE Anti-freeze waste piping
Brine System
M-BRIN-EQPM
Brine system equipment
M-BRIN-RETN-PIPE Brine system return piping
M-BRIN-SPLY-PIPE Brine system supply piping
Chemical Treatment System
M-CHEM-EQPM
Chemical treatment system equipment
M-CHEM-RETN-PIPE Chemical treatment system return piping
M-CHEM-SPLY-PIPE Chemical treatment system supply piping
Compressed Air
M-CMPA-EQPM
Equipment
M-CMPA-PIPE
Piping
Condenser Water System
M-CNDW-EQPM
Condenser water system equipment
M-CNDW-RETN-PIPE Condenser water system return piping
M-CNDW-SPLY-PIPE Condenser water system supply piping
Controls
M-CONT-THER
Thermostats
M-CONT-WIRE
Low voltage wiring
Chilled Water System
M-CWTR-CNDS
Condensate piping
M-CWTR-EQPM
Chilled water equipment
M-CWTR-RETN-PIPE Chilled water return piping
M-CWTR-SPLY-PIPE Chilled water supply piping
Culvert Valves
M-CVAL-BASE
Culvert valve machinery base
M-CVAL-BEAM
Culvert valve beams
M-CVAL-CYLD
Culvert valve machinery cylinder (outline not for details)
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
V
0
NA
V
0
V
V
0.18
0.35
0.18
0.18
0.18
NA
V
V
V
V
113
2
5
8
5
NA
6
V
V
V
16
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
ACIDWS, IWASTE
2
0.35
0.50
0.50
80
80
80
11
11
11
X
X
X
0
0
0
0.35
0.50
0.50
82
82
82
18
18
18
X
X
X
0
BRINER
BRINES
0.35
0.50
0.50
123
123
123
31
31
31
X
X
X
0
0
0
0.35
0.50
0.50
123
123
123
31
31
31
0
CMPAIR
0.70
0.50
84
83
34
42
0
CONDWR
CONDWS
0.35
0.50
0.50
83
83
83
42
42
42
X
X
X
0
1, 2
0.25
0.25
1
1
3
3
X
X
CDRNAF
0
CWR
CWS
0.50
0.35
0.50
0.50
83
163
163
163
42
41
41
41
X
X
X
X
0
0
0
0.35
0.35
0.35
2
2
80
4
4
11
X
X
X
X
X
X
X
X
X
X
X
A50
Discipline: Mechanical
Model File Layers/Levels
0
7
0
0
0.50
0.25
0.35
0.35
203
5
203
203
45
1
45
45
X
X
X
X
V
7
0
0
0.50
0.25
0.35
0.35
83
5
83
83
42
1
42
42
X
X
X
X
0
0
0.25
0.25
3
3
2
2
X
X
0
0
0
0
LIQPET
FUELOR
FUELOS
FUELOV
0.50
0.50
0.50
0.70
0.50
0.50
0.50
0.50
23
23
23
24
23
23
23
23
46
46
46
38
46
46
46
46
0
GHR
GHS
0.35
0.50
0.50
82
82
82
18
18
18
X
X
X
0
0
0
0.35
0.50
0.50
203
203
203
45
45
45
X
X
X
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
7
5
3
200
4
4
7
0
1
2
13
7
7
0
Details
X
X
X
Sections
46
46
46
Elevations
23
23
23
Control Diagrams
0.35
0.50
0.50
Machine Design
0
DTR
DTS
Material Handling
2
3
7
5
3
1
4
6
Hydraulic Systems
0.35
0.35
0.35
0.35
MicroStation Color #
0
0
0
0
HVAC Plan
AutoCAD Color #
AIA Format
Level/Layer Description
M-CVAL-SEAL
Culvert valve seals
M-CVAL-SKIN
Culvert valve skin plate
M-CVAL-STIF
Stiffener plates, angles, etc.
M-CVAL-TRUN
Culvert valve trunnion beam
Dual Temperature System
M-DUAL-EQPM
Dual temperature system equipment
M-DUAL-RETN-PIPE Dual temperature system return piping
M-DUAL-SPLY-PIPE Dual temperature system supply piping
Dust and Fume Collection Systems
M-DUST-DUCT
Dust and fume ductwork
M-DUST-DUCT-CNTR Dust and fume ductwork centerlines
M-DUST-EQPM
Dust and fume equipment
M-DUST-GRIL
Dust and fume grilles
Exhaust Air System
M-EXHS-DUCT
Exhaust ductwork
M-EXHS-DUCT-CNTR Exhaust ductwork centerlines
M-EXHS-EQPM
Exhaust equipment
M-EXHS-GRIL
Grilles
Floor Information
M-FLOR-IDEN
Room name, space identification text (copied from Architectural - Floor Plan model file)
M-FLOR-NUMB
Room/space identification number and symbol (copied from Architectural - Floor Plan model file)
Fuel Systems
M-FUEL-DIES-RETN Diesel fuel return piping
M-FUEL-DIES-SPLY Diesel fuel supply piping
M-FUEL-DIES-VENT Diesel fuel vent piping
M-FUEL-EQPM
Equipment
M-FUEL-GGEP-LQPG Liquid petroleum gas
M-FUEL-OGEP-RETN Return oil piping
M-FUEL-OGEP-SPLY Supply oil piping
M-FUEL-OGEP-VENT Oil piping vent
Glycol System
M-GLYC-EQPM
Glycol system equipment
M-GLYC-RETN-PIPE Glycol system return piping
M-GLYC-SPLY-PIPE Glycol system supply piping
Geothermal Heat Pump System
M-GTHP-EQPM
Geothermal heat pump system equipment
M-GTHP-RETN-PIPE Geothermal heat pump system return piping
M-GTHP-SPLY-PIPE Geothermal heat pump system supply piping
Hydraulic Control Systems (Hydraulic Fluid)
M-HCSF-CYLD
Hydraulic cylinders
M-HCSF-CYLD-PSTN Hydraulic cylinder pistons
M-HCSF-CYLD-WEAR Wear rings
M-HCSF-EQPM
Hydraulic system equipment
M-HCSF-FTTG
Hose and pipe fittings
M-HCSF-HOSE
Hydraulic hoses
M-HCSF-MOTR
Hydraulic motors and actuators
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A51
Discipline: Mechanical
Model File Layers/Levels
0.35
0.35
0.25
0.35
0.25
0.35
0.35
0.35
0.25
0.35
0.25
0.35
0.25
0.25
0.18
0.35
0.25
0.35
163
163
163
6
3
6
113
113
113
2
1
1
1
3
5
113
113
6
41
41
41
5
2
5
16
16
16
4
3
3
3
2
1
16
16
5
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0, 1, 2
0
0
0
0
0.25
0.35
0.25
0.35
0.35
3
20
1
2
2
2
6
3
4
4
X
X
X
X
X
Details
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Sections
5
5
2
5
2
5
4
41
Elevations
6
6
3
6
3
6
2
163
Control Diagrams
0.35
0.25
0.25
0.35
0.25
0.35
0.25
0.50
Machine Design
0
0
0
0
0
0
0
0
Material Handling
11
0
12
1
5
6
13
5
5
5
5
5
80
7
120
5
6
20
200
6
6
6
6
6
Hydraulic Systems
0.35
0.35
0.50
0.35
0.35
0.35
0.50
0.35
0.35
0.35
0.35
0.35
MicroStation Color #
0
0
0
0
0
0
0
0
0
0
0
0
HVAC Plan
AutoCAD Color #
AIA Format
Level/Layer Description
M-HCSF-OTLN
Outlines of machinery, etc. in the vicinity of the hydraulic components
M-HCSF-PUMP
Hydraulic pumps and pump motors
M-HCSF-RETN-PIPE Hydraulic system return piping
M-HCSF-ROOM
Floor, walls, etc. that hydraulic system attaches to
M-HCSF-SCHM-MISC Miscellaneous schematic figures (i.e., common location lines)
M-HCSF-SUPT
Pipe supports, hangers, etc.
M-HCSF-SPLY-PIPE Hydraulic system supply piping
M-HCSF-VALV
Hydraulic valves
M-HCSF-VALV-CONT Hydraulic directional control valves
M-HCSF-VALV-FLOW Flow control valves, check valves, etc.
M-HCSF-VALV-PRES Pressure control valves: relief valves, counterbalance valves, etc.
M-HCSF-VALV-SOFF Hydraulic shutoff type valves (ball, gate, etc.)
Hydraulic Control Systems (Water)
Stilling wells, rigid anchors, anchor guides, rectifiers, reducers, markers, meters, regulators, tanks, and valves
M-HCSW-DEVC
M-HCSW-DEVC-IDEN Device identifiers
M-HCSW-EQPM-ACCS Equipment access doors
M-HCSW-PUMP
Pump station equipment
M-HCSW-PUMP-FLOW Flow direction arrows
M-HCSW-PUMP-FTTG Caps and flanges
M-HCSW-PUMP-IDEN Pump identifier tags, symbol modifiers, and text
M-HCSW-PUMP-PIPE Pump piping (includes fittings and valves)
High Temperature/Chilled Water System
M-HTCW-CWTR-MAIN Main chilled water piping
M-HTCW-CWTR-PLNT Chilled water plant
M-HTCW-CWTR-SERV Chilled water service piping
Rigid anchors, anchor guides, rectifiers, reducers, markers, meters, pumps, regulators, tanks, and valves
M-HTCW-DEVC
M-HTCW-FLOW
Flow direction arrows
M-HTCW-FTTG
Caps and flanges
M-HTCW-HWTR-MAIN Main high temperature piping
M-HTCW-HWTR-PLNT High temperature water plant
M-HTCW-HWTR-SERV High temperature service piping
M-HTCW-IDEN
Identifier tags, symbol modifiers, and text
M-HTCW-JBOX
Junction boxes, manholes, handholes, test boxes
M-HTCW-LWTR-MAIN Main low temperature piping
M-HTCW-LWTR-SERV Low temperature service piping
M-HTCW-PITS
Valve pits/vaults, steam pits
M-HTCW-RETN-PIPE Return for all HTCW lines
M-HTCW-STEM-MAIN Main steam piping
M-HTCW-STEM-SERV Steam service piping
M-HTCW-STNS-PUMP Pump stations
HVAC System
M-HVAC-ACCS
Equipment access doors
M-HVAC-CDFF
Ceiling diffusers, registers, and grilles
M-HVAC-DMPR
Fire, smoke, volume dampers
M-HVAC-EQPM
Equipment (non-powered)
M-HVAC-EQPM-EFAN Equipment with electric fans or motors
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A52
Discipline: Mechanical
Model File Layers/Levels
0.35
0.50
0.50
113
113
113
16
16
16
X
X
X
X
X
X
0
0
0
0.35
0.50
0.50
200
200
200
13
13
13
X
X
X
0
0
0
0.35
0.50
0.50
200
200
200
13
13
13
X
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
0.35
2
2
2
22
2
22
2
4
2
6
22
6
6
22
22
22
22
22
4
4
4
22
4
22
4
7
4
5
22
5
5
22
22
22
22
22
Details
0
HWR, HTHWR
HWS, HTHWS
Sections
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Elevations
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Control Diagrams
4
4
4
33
5
46
46
1
4
7
1
7
7
5
4
Machine Design
2
2
2
162
6
23
23
5
2
4
5
4
4
6
2
Material Handling
HVAC Plan
0.35
0.35
0.35
0.35
0.35
0.35
0.50
0.25
0.35
0.50
0.25
0.50
0.50
0.35
0.35
MicroStation Color #
0
0
0
0
0
0
V
7
0
V
7
V
V
0
0
Hydraulic Systems
AutoCAD Color #
AIA Format
Level/Layer Description
M-HVAC-EQPM-EPIP Equipment with piping and electricity
M-HVAC-EQPM-FLOR Equipment - floor mounted
M-HVAC-EQPM-SUSP Equipment - suspended
M-HVAC-FDFF
Floor diffusers, registers, and grilles
M-HVAC-IDEN
Duct sizes and pressure classes
M-HVAC-RDFF
Return air diffusers
M-HVAC-RETN
Return ductwork
M-HVAC-RETN-CNTR Return ductwork centerlines
M-HVAC-ROOF
Roof mounted HVAC equipment
M-HVAC-SPLY
Supply ductwork
M-HVAC-SPLY-CNTR Supply ductwork centerlines
M-HVAC-SPLY-HDUC Supply ductwork - high pressure
M-HVAC-SPLY-LDUC Supply ductwork - low pressure
M-HVAC-TAGS
Diffuser/register/grille tags and air flow arrows
M-HVAC-WDFF
Wall diffusers, registers, and grilles
Hot Water Heating System
M-HWTR-EQPM
Hot water heating system equipment
M-HWTR-RETN-PIPE Hot water heating system return piping
M-HWTR-SPLY-PIPE Hot water heating system supply piping
Insulating (Transformer) Oil System
M-INSL-EQPM
Insulating oil equipment
M-INSL-RETN-PIPE Insulating oil return piping
M-INSL-SPLY-PIPE Insulating oil supply piping
Lubrication Oil
M-LUBE-EQPM
Lubrication oil equipment
M-LUBE-RETN-PIPE Lubrication oil return piping
M-LUBE-SPLY-PIPE Lubrication oil supply piping
Machine Design
M-MACH-AXLE
Shafts and axles
M-MACH-BASE
Machinery bases
M-MACH-BEAR
Bearings and couplings
M-MACH-BELT
Wire rope, chains, and belts
M-MACH-BSHG
Bushings, wear plates, shims, and spacers
M-MACH-CLEV
Clevises
M-MACH-COMP
Miscellaneous machinery parts and components
M-MACH-COVR
Machinery covers, cover plates, and guarding
M-MACH-FSTN
Fastenters, nuts, and bolts
M-MACH-GEAR
Gears
M-MACH-KEYS
Keys and keeper plates
M-MACH-LROT
Large rotating machinery (turbine and pump outlines)
M-MACH-MOTR
Machinery motors
M-MACH-PINS
Pins
M-MACH-PULL
Pulleys, drums, and sheaves
M-MACH-RAIL
Rails (e.g., crane rails, rail hoots, splice plates, etc.)
M-MACH-ROLL
Rollers and wheels
M-MACH-ROLL-TRAK Roller tracks
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A53
Discipline: Mechanical
Model File Layers/Levels
0
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
0.35
2
2
2
2
6
6
4
4
4
4
5
5
X
X
X
X
X
X
0
0
0
0
0
0.35
0.35
0.35
0.35
0.35
2
22
3
80
1
4
22
2
11
3
X
X
X
X
X
0
7
0
0
0.50
0.25
0.35
0.35
2
5
2
2
4
1
4
4
0
NTGASN
0.35
0.35
6
6
5
5
2
2
2
0.25
0.25
0.25
3
1
2
2
3
4
0
0
0
0.35
0.50
0.50
120
120
120
12
12
12
0
7
0
0
0.50
0.25
0.35
0.35
1
5
1
1
3
1
3
3
X
X
X
X
0
0
0
0.35
0.50
0.50
203
203
203
45
45
45
X
X
X
Details
0
1
0
Sections
7
5
7
Elevations
0.50
0.25
0.35
Control Diagrams
0
7
0
X
X
X
X
Machine Design
22
22
4
22
Material Handling
22
22
2
22
0.35
0.35
0.35
0.35
Hydraulic Systems
MicroStation Color #
0
0
0
0
HVAC Plan
AutoCAD Color #
AIA Format
Level/Layer Description
M-MACH-SEAL
Seals
M-MACH-SHOE
Sliding shoes, skids, etc.
M-MACH-SUPT
Support brackets
M-MACH-SPRG
Springs
Mixed Air System
M-MAIR-DUCT
Mixed air ductwork
M-MAIR-DUCT-CNTR Mixed air ductwork centerlines
M-MAIR-EQPM
Mixed air equipment
Material Handling Equipment
M-MATL-CRAN
Cranes
M-MATL-CRAN-BOOM Crane boom
M-MATL-HOIS
Hoists
M-MATL-HOOK
Hooks, eyes, and other end attachments
M-MATL-LIFT
Miscellaneous lifting equipment
M-MATL-WIRE
Wire rope, chains, and other hoisting medium
Miter Gates
M-MITR-BASE
Miter gate machinery base
M-MITR-CLEV
Clevises
M-MITR-CRNG
Cardanic ring
M-MITR-CYLD
Miter gate machinery cylinder (outline not for details)
M-MITR-TRUN
Miter gate machinery trunnion
Makeup Air System
M-MKUP-DUCT
Makeup air ductwork
M-MKUP-DUCT-CNTR Makeup air ductwork centerlines
M-MKUP-EQPM
Makeup air equipment
M-MKUP-GRIL
Makeup air grilles
Natural Gas System
M-NGAS-EQPM
Natural gas equipment
M-NGAS-PIPE
Natural gas piping
Penetrations
M-FLOR-PENE
Floor penetrations
M-ROOF-PENE
Roof penetrations
M-WALL-PENE
Wall penetrations
Process Piping
M-PROC-EQPM
Process equipment
M-PROC-RETN-PIPE Process return piping
M-PROC-SPLY-PIPE Process supply piping
Relief Air System
M-RAIR-DUCT
Relief air ductwork
M-RAIR-DUCT-CNTR Relief air ductwork centerlines
M-RAIR-EQPM
Relief air equipment
M-RAIR-GRIL
Relief air grilles
Energy Recovery System
M-RCOV-EQPM
Energy recovery system equipment
M-RCOV-RETN-PIPE Energy recovery system return piping
M-RCOV-SPLY-PIPE Energy recovery system supply piping
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A54
Discipline: Mechanical
Model File Layers/Levels
31
31
31
BOILBD
CDRNAF
0
STEAMH
STEAML
STEAMM
0.50
0.50
0.35
0.50
0.50
0.50
113
83
113
113
1
2
16
42
16
16
3
4
X
X
X
X
X
X
0
7
0
0.50
0.25
0.35
200
5
200
13
1
13
X
X
X
0
0
0
0.35
0.35
0.18
2
6
8
4
5
9
0
0
0
0
0.35
0.18
0.50
0.18
2
5
4
8
4
1
7
9
X
X
X
X
X
X
Details
123
123
123
Sections
0.35
0.50
0.50
Elevations
0
0
0
Control Diagrams
X
X
X
X
Machine Design
41
41
41
41
Material Handling
163
163
163
163
HVAC Plan
0.50
0.35
0.50
0.50
Hydraulic Systems
MicroStation Color #
REFRD
0
REFRS
REFRL
Level/Layer Description
AutoCAD Color #
AIA Format
Refrigeration System
M-REFG-DISC-PIPE
M-REFG-EQPM
M-REFG-RETN-PIPE
M-REFG-SPLY-PIPE
Raw Water Piping
M-RWTR-EQPM
M-RWTR-RETN-PIPE
M-RWTR-SPLY-PIPE
Steam System
M-STEM-BLBD
M-STEM-CNDS
M-STEM-EQPM
M-STEM-HPIP
M-STEM-LPIP
M-STEM-MPIP
Transfer Air System
M-TAIR-DUCT
M-TAIR-DUCT-CNTR
M-TAIR-EQPM
Diagram Information
M-DIAG-GRPH
Elevations
M-ELEV-IDEN
M-ELEV-OTLN
M-ELEV-PATT
Sections
M-SECT-IDEN
M-SECT-MBND
M-SECT-MCUT
M-SECT-PATT
Detail Information
M-DETL-GRPH
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
A55
Discipline: Electrical
Model File Layers/Levels
AutoCAD Color #
MicroStation Color #
Lighting Plan
Power Plan
Details
Riser/One-Line Diagrams
E-CABL-TRAY
AIA Format
General Information
E-ANNO-DIMS
E-ANNO-KEYN
E-ANNO-MASK
E-ANNO-NOTE
E-ANNO-NPLT
E-ANNO-PATT
E-ANNO-RDME
E-ANNO-REFR
E-ANNO-SYMB
E-ANNO-TEXT
Airfields
E-AFLD-BCNS-IDEN
E-AFLD-BCNS-MISC
E-AFLD-BCNS-STRB
E-AFLD-CIRC-CTRL
E-AFLD-CIRC-IDEN
E-AFLD-CIRC-MULT
E-AFLD-CIRC-SERS
E-AFLD-DEVC
E-AFLD-DBNK
E-AFLD-JBOX
E-AFLD-LITE-APPR
E-AFLD-LITE-DIST
E-AFLD-LITE-LANE
E-AFLD-LITE-OBST
E-AFLD-LITE-RUNW
E-AFLD-LITE-SIGN
E-AFLD-LITE-TAXI
E-AFLD-LITE-THRS
E-AFLD-VALT
Alarm System
E-ALRM-EQPM
E-ALRM-IDEN
Bell System
E-BELL-EQPM
E-BELL-IDEN
Cable System
E-CABL-COAX
E-CABL-FIBR
E-CABL-IDEN
E-CABL-MULT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
V
0
NA
V
0
V
V
0.18
0.35
0.18
0.18
0.18
NA
V
V
V
V
113
2
5
8
5
NA
6
V
V
V
16
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0
0
0
0
0
0
0
0
EUDUCN
0
0
0
0
0
0
0
0
0
0
0.35
0.50
0.50
0.50
0.35
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
203
203
203
163
2
23
203
23
83
23
203
203
203
203
203
203
203
203
203
45
45
45
41
4
46
45
46
42
46
45
45
45
45
45
45
45
45
45
0
0
0.50
0.35
203
2
45
4
X
X
0
0
0.50
0.35
203
2
45
4
X
X
Coax cable
Fiber optics cable
Identifier tags, symbol modifiers, and text
Multi-conductor cable
2
FIBOPT
0
V
0,
WIREWY
0.50
0.50
0.35
0.50
83
83
2
83
42
42
4
42
X
X
X
X
0.50
203
45
0
0
0.50
0.50
83
83
42
42
Level/Layer Description
Witness/extension lines, dimension terminators, dimension text
Reference keynotes with associated leaders
Text/shape mask for use with photo backgrounds
General notes and general remarks
Non-plotting graphic information
Patterning, poche, shading, and hatching
Read-me information
Reference files and raster attachments
Miscellaneous symbols
Miscellaneous text and callouts with associated leaders
Identifier tags, symbol modifiers, and text
Miscellaneous navaids - windcones and beacons
Strobe beacons
Control and monitoring circuits
Circuit identifier tags, symbol modifier, and text
Multiple circuits
Series circuits
Capacitors, voltage regulators, motors, buses, generators, meters, grounds, and markers
Ductbanks
Junction boxes, pull boxes, manholes, handholes, pedestals, splices
Approach lights
Distance and arresting gear markers
Hoverlane, taxilane, and helipad lights
Obstruction lights
Runway lights
Taxiway guidance signs
Taxiway lights
Threshold lights
Airfield lighting vaults
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A56
Discipline: Electrical
Model File Layers/Levels
45
0, CCTV
0
0.50
0.35
203
2
45
4
X
X
0
0
0.50
0.35
203
2
45
4
X
X
0
0
0
0
0
COMARN
0
0
0
0
COMUGN
0
0.50
0.35
0.50
0.50
0.50
0.50
0.35
0.50
0.50
0.35
0.50
0.35
23
2
23
23
23
4
4
203
203
203
4
4
46
4
46
46
46
7
7
45
45
45
7
7
0
0
0.50
0.35
203
2
45
4
EUDUCN 0.50
0
0.35
83
83
42
42
0
0
0.50
0.35
203
2
45
4
0
0
0.25
0.25
3
3
2
2
0
0
0
0
0.50
0.50
0.50
0.50
4
163
83
23
7
41
42
46
0
0
0.50
0.35
203
2
45
4
0.50
83
42
Riser/One-Line Diagrams
203
Details
0.50
0.35
0,
CABLTV
0
42
42
83
83
0.35
0.50
Power Plan
0
0
Lighting Plan
MicroStation Color #
E-CATV-IDEN
Identifier tags, symbol modifiers, and text
Closed-Circuit Television System
E-CCTV-EQPM
Closed-circuit television system equipment
E-CCTV-IDEN
Identifier tags, symbol modifiers, and text
Clock System
E-CLOK-EQPM
Clock system equipment
E-CLOK-IDEN
Identifier tags, symbol modifiers, and text
Communications
E-COMM-CIRC
Circuits
E-COMM-CNMB
Communication circuit numbers (e.g., panel/circuit number, wire/conduit size)
E-COMM-EQPM
Other communications distribution equipment
E-COMM-JBOX
Communication junction boxes, pull boxes, handholes, pedestals, and splices
E-COMM-MHOL
Manholes
E-COMM-OVHD
Overhead communications/telephone lines
E-COMM-OVHD-IDEN Identifier tags, symbol modifier and text
E-COMM-POLE
Poles
E-COMM-POLE-GUYS Guying equipment
E-COMM-POLE-IDEN Identifier tags, symbol modifiers, and text
E-COMM-UGND
Underground communications/telephone lines
E-COMM-UGND-IDEN Identifier tags, symbol modifier and text
Central Dictation System
E-DICT-EQPM
Central dictation system equipment
E-DICT-IDEN
Identifier tags, symbol modifiers, and text
Underground Ductbanks (to be used when multiple systems are in one ductbank system)
E-DBNK-MULT
Ductbank
E-DBNK-MULT-IDEN Identifier tags, symbol modifier and text
Energy Monitoring Control Systems
E-EMCS-EQPM
Energy monitoring control system equipment
E-EMCS-IDEN
Identifier tags, symbol modifiers, and text
Floor Information
E-FLOR-IDEN
Room name, space identification text (copied from Architectural - Floor Plan model file)
Room/space identification number and symbol (copied from Architectural - Floor Plan model file)
E-FLOR-NUMB
Ground System
E-GRND-CIRC
Circuits
E-GRND-DIAG
Ground system diagram
E-GRND-EQUI
Equipotential ground system
E-GRND-REFR
Reference ground system
Intercom/PA System
E-INTC-EQPM
Intercom system equipment
E-INTC-IDEN
Identifier tags, symbol modifiers, and text
Lighting
E-LITE-CIRC
Lighting circuits (including crosslines and homeruns)
AutoCAD Color #
E-CATV-EQPM
Level/Layer Description
Identifier tags, symbol modifier, and text
Test stations
AIA Format
E-CATH-IDEN
E-CATH-TEST
Cable TV System
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A57
Discipline: Electrical
Model File Layers/Levels
0
0
0.50
0.35
203
2
45
4
0.50
203
45
0.50
0.50
0.50
0.35
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.50
0.35
0.50
0.50
0.50
0.50
0.50
0.50
0.50
83
83
83
2
23
163
203
4
83
4
4
203
203
203
23
4
163
203
83
23
23
42
42
42
4
46
41
45
7
42
7
7
45
45
45
46
7
41
45
42
46
46
X
X
X
X
0.50
0.35
4
4
7
7
0,
BUSWAY
E-POWR-CIRC
Power circuits (including crosslines and homeruns)
V
E-POWR-CLNG
Ceiling outlets (receptacles and switches)
0
E-POWR-CNDT
Conduit
0
E-POWR-CNMB
Power circuit numbers (e.g., panel/circuit number, wire/conduit size)
0
E-POWR-DEVC
Capacitors, voltage regulators, motors, buses, generators, meters, grounds, and markers
0
E-POWR-DSCO
0
Disconnect switches
E-POWR-FEED
Feeders
0
E-POWR-GENR
Generators and auxiliary equipment
0
E-POWR-JBOX
Junction boxes, pull boxes, manholes, handholes, pedestals, splices
0
E-POWR-MOTR
Motors and utilization equipment
0
E-POWR-PANL
Panelboards, MCC, backing boards, patch panel racks
0
E-POWR-POLE
Power poles
0
E-POWR-POLE-GUYS Guying equipment
0
E-POWR-POLE-IDEN Identifier tags, symbol modifiers, and text
0
E-POWR-SBST
Substation equipment
0
E-POWR-SWBD
Switchboards
0
0
E-POWR-SWCH
Fuse cutouts, motor starters, contactors, pole mounted switches, circuit breakers, reclosers, cubicle switches
E-POWR-URAC
Underfloor raceways
3
E-POWR-WALL
Wall/floor outlets (receptacles and switches)
0
E-POWR-XFMR-PADM Pad mounted transformers
0
E-POWR-XFMR-POLM Pole mounted transformers
0
Primary Electrical Cables
E-PRIM-OVHD
Overhead electrical utility lines
EPARN
E-PRIM-OVHD-IDEN Identifier tags, symbol modifiers, and text
0
E-POWR-BUSW
Busways
Riser/One-Line Diagrams
45
4
Details
203
2
0.50
0.35
0
0
45
4
46
45
45
45
45
4
42
7
45
45
41
45
203
2
23
203
203
203
203
2
83
4
203
203
163
203
0.50
0.35
0.50
0.50
0.50
0.35
0.50
0.35
0.50
0.50
0.50
0.50
0.50
0.50
Power Plan
MicroStation Color #
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Lighting Plan
AutoCAD Color #
AIA Format
Level/Layer Description
E-LITE-CLNG
Ceiling mounted (surface/pendant) fixtures
E-LITE-CNMB
Lighting circuit numbers (e.g., panel/circuit number, wire/conduit size)
E-LITE-EMER
Emergency fixtures (outline of light (if ceiling mounted) should go on E-LITE-CLNG)
E-LITE-EXIT
Exit fixtures (outline of light (if ceiling mounted) should go on E-LITE-CLNG)
E-LITE-EXTR
Exterior lights
E-LITE-EXTR-IDEN Exterior light identifier tags, symbol modifiers, and text
E-LITE-FLOR
Floor mounted fixtures (e.g., stage)
E-LITE-IDEN
Light fixture identifier tags
E-LITE-JBOX
Junction boxes
E-LITE-PANL
Main distribution panels, switchboards, lighting panels
E-LITE-ROOF
Roof lighting
E-LITE-SPCL
Special fixtures
E-LITE-SWCH
Lighting contactors, photoelectric controls, low-voltage lighting controls, etc.
E-LITE-WALL
Wall mounted fixtures
Lightning Protection System
E-LTNG-COND
Lightning protection conductors
E-LTNG-TERM
Lightning protection terminals
Nurse Call/Paging System
E-NURS-EQPM
Nurse call/paging system equipment
E-NURS-IDEN
Identifier tags, symbol modifiers, and text
Power
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
A58
Discipline: Electrical
Model File Layers/Levels
ESARN
0
ESUGN
0
0.50
0.35
0.50
0.35
163
163
163
163
41
41
41
41
X
X
X
X
0
0
0
0
0
0
0.50
0.50
0.50
0.35
0.50
0.50
23
23
23
2
23
23
46
46
46
4
46
46
X
X
X
X
X
X
0
0
0.50
0.35
203
2
45
4
X
X
0
0
0
0
0.50
0.35
0.50
0.35
203
203
203
203
45
45
45
45
0
0
0.50
0.35
203
2
45
4
0.25
V
0
V
0.35
V
2
V
4
Riser/One-Line Diagrams
X
X
Details
7
7
4
4
0.50
0.35
Power Plan
MicroStation Color #
EPUGN
0
Lighting Plan
AutoCAD Color #
AIA Format
Level/Layer Description
E-PRIM-UGND
Underground electrical utility lines
E-PRIM-UGND-IDEN Identifier tags, symbol modifiers, and text
Secondary Electrical Cables
E-SECD-OVHD
Overhead electrical utility lines
E-SECD-OVHD-IDEN Identifier tags, symbol modifiers, and text
E-SECD-UGND
Underground electrical utility lines
E-SECD-UGND-IDEN Identifier tags, symbol modifiers, and text
Security System
E-SERT-ACCS
Access control system
E-SERT-CLNG
Ceiling mounted sensors
E-SERT-FLOR
Floor mounted sensors
E-SERT-IDEN
Identifier tags, symbol modifiers, and text
E-SERT-UNDR
Buried sensors
E-SERT-WALL
Wall mounted sensors
Sound System
E-SOUN-EQPM
Sound system equipment
E-SOUN-IDEN
Identifier tags, symbol modifiers, and text
Special Systems
E-SPCL-SYST
Special systems (UMCS, EMCS, CATV, etc.)
E-SPCL-SYST-IDEN Special systems (UMCS, EMCS, CATV, etc.) identifier tags, symbol modifier, and text
E-SPCL-TRAF
Traffic signal system
E-SPCL-TRAF-IDEN Traffic signal identifier tags, symbol modifier, and text
TV Antenna System
E-TVAN-EQPM
Television antenna system equipment
E-TVAN-IDEN
Identifier tags, symbol modifiers, and text
Other Discipline Information
E-DISC-INFO
Clearances and working space information (NEC code, etc.)
Detail Information
E-DETL-GRPH
Graphics, gridlines, non-text items
Diagram Information
E-DIAG-GRPH
Graphics, gridlines, non-text items
E-DIAG-IDEN
Identifier tags, symbol modifiers, and text
Graphic Defaults
Line Style
Level/Layer Naming
X
X
X
X
X
X
X
X
X
X
A59
Discipline: Telecommunications
Model File Layers/Levels
Graphic Defaults
AutoCAD Color #
MicroStation Color #
Telephone/Data Plan
Riser Diagrams
Details
AIA Format
Level/Layer Description
General Information
T-ANNO-DIMS
Witness/extension lines, dimension terminators, dimension text
T-ANNO-KEYN
Reference keynotes with associated leaders
T-ANNO-NOTE
General notes and general remarks
T-ANNO-NPLT
Non-plotting graphic information
T-ANNO-PATT
Patterning, poche, shading, and hatching
T-ANNO-RDME
Read-me information
T-ANNO-REFR
Reference files and raster attachments
Miscellaneous symbols
T-ANNO-SYMB
T-ANNO-TEXT
Miscellaneous text and callouts with associated leaders
Cable System
T-CABL-COAX
Coax cable
T-CABL-FIBR
Fiber optics cable
T-CABL-IDEN
Cable identifiers
T-CABL-MULT
Multi-conductor cable
T-CABL-TRAY
Cable trays and wireways
Communications
T-COMM-CIRC
Circuits
T-COMM-CNMB
Circuit numbers
T-COMM-EQPM
Equipment
T-COMM-JBOX
Junction boxes
Equipment
T-EQPM-COMB
Distribution equipment for both copper and fiber optics
T-EQPM-COPP
Distribution equipment for copper
T-EQPM-FIBR
Distribution equipment for fiber optic
T-EQPM-OTHR
Other telecommunications equipment
T-EQPM-RELA
Relays, resistors, capacitors, and inducers
Floor Information
T-FLOR-IDEN
Room name, space identification text (copied from Archictural - Floor Plan model file)
T-FLOR-NUMB
Room/space identification number and symbol (copied from Architectural - Floor Plan model file)
Jacks
T-COMB-JACK
Combination telephone and data/LAN jacks
T-DATA-JACK
Data/LAN jacks
T-PHON-JACK
Telephone jacks
Other Discipline Information
T-DISC-INFO
Information and notes for other disciplines
Diagram Information
T-DIAG-GRPH
Graphics, gridlines, non-text items
T-DIAG-IDEN
Identifier tags, symbol modifiers, and text
Detail Information
T-DETL-GRPH
Graphics, gridlines, non-text items
Line Style
Level/Layer Naming
0
0
0
0
V
0
NA
V
0
V
V
0.35
0.18
0.18
0.18
NA
V
V
V
V
2
5
8
5
NA
6
V
V
V
4
1
9
1
NA
5
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
2
FIBOPT
0
0
0
0.50
0.50
0.35
0.50
0.50
83
83
2
83
203
42
42
4
42
45
X
X
X
X
X
0
0
0
0
0.50
0.50
0.50
0.50
83
83
83
83
42
42
42
42
X
X
X
X
0
0
0
0
0
0.50
0.50
0.50
0.50
0.50
4
4
4
4
4
7
7
7
7
7
X
X
X
X
X
0
0
0.25
0.25
3
3
2
2
X
X
0
0
0
0.50
0.50
0.50
203
203
203
45
45
45
X
X
X
V
0
V
0.35
V
2
V
4
X
X
X
X
A60
Appendix B
Sheet File Level/Layer Assignment
Tables
This appendix provides the sheet file level/layer assignment tables:
General............................................................ B3
Hazardous Materials ....................................... B4
Survey/Mapping.............................................. B5
Geotechnical ................................................... B6
Civil ................................................................ B7
Landscape ....................................................... B8
Structural......................................................... B9
Architectural ................................................. B10
Interiors ......................................................... B11
Fire Protection............................................... B12
Plumbing ....................................................... B13
Mechanical.................................................... B14
Electrical ....................................................... B15
Telecommunications ..................................... B16
B1
Discipline: General
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
G-ANNO-DIMS
G-ANNO-KEYN
G-ANNO-LEGN
G-ANNO-MATC
G-ANNO-NOTE
G-ANNO-NPLT
G-ANNO-PATT
G-ANNO-RDME
G-ANNO-REDL
G-ANNO-REFR
G-ANNO-REVC
G-ANNO-REVS
G-ANNO-SCHD
G-ANNO-SYMB
G-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B3
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
H-ANNO-DIMS
H-ANNO-KEYN
H-ANNO-LEGN
H-ANNO-MATC
H-ANNO-NOTE
H-ANNO-NPLT
H-ANNO-PATT
H-ANNO-RDME
H-ANNO-REDL
H-ANNO-REFR
H-ANNO-REVC
H-ANNO-REVS
H-ANNO-SCHD
H-ANNO-SYMB
H-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B4
Discipline: Survey/Mapping
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
V-ANNO-DIMS
V-ANNO-KEYN
V-ANNO-LEGN
V-ANNO-MATC
V-ANNO-NOTE
V-ANNO-NPLT
V-ANNO-PATT
V-ANNO-RDME
V-ANNO-REDL
V-ANNO-REFR
V-ANNO-REVC
V-ANNO-REVS
V-ANNO-SCHD
V-ANNO-SYMB
V-ANNO-TEXT
Topography
V-TOPO-COOR
V-TOPO-COOR-LALO
V-TOPO-COOR-STAT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
0
0
0
0.25
0.18
0.18
122
3
3
23
2
2
B5
Discipline: Geotechnical
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
B-ANNO-DIMS
B-ANNO-KEYN
B-ANNO-LEGN
B-ANNO-MATC
B-ANNO-NOTE
B-ANNO-NPLT
B-ANNO-PATT
B-ANNO-RDME
B-ANNO-REDL
B-ANNO-REFR
B-ANNO-REVC
B-ANNO-REVS
B-ANNO-SCHD
B-ANNO-SYMB
B-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B6
Discipline: Civil
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
C-ANNO-DIMS
C-ANNO-KEYN
C-ANNO-LEGN
C-ANNO-MATC
C-ANNO-NOTE
C-ANNO-NPLT
C-ANNO-PATT
C-ANNO-RDME
C-ANNO-REDL
C-ANNO-REFR
C-ANNO-REVC
C-ANNO-REVS
C-ANNO-SCHD
C-ANNO-SYMB
C-ANNO-TEXT
Topography
C-TOPO-COOR
C-TOPO-COOR-LALO
C-TOPO-COOR-STAT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
0
0
0
0.35
0.25
0.25
122
3
3
23
2
2
B7
Discipline: Landscape
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
L-ANNO-DIMS
L-ANNO-KEYN
L-ANNO-LEGN
L-ANNO-MATC
L-ANNO-NOTE
L-ANNO-NPLT
L-ANNO-PATT
L-ANNO-RDME
L-ANNO-REDL
L-ANNO-REFR
L-ANNO-REVC
L-ANNO-REVS
L-ANNO-SCHD
L-ANNO-SYMB
L-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B8
Discipline: Structural
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
S-ANNO-DIMS
S-ANNO-KEYN
S-ANNO-LEGN
S-ANNO-MATC
S-ANNO-NOTE
S-ANNO-NPLT
S-ANNO-PATT
S-ANNO-RDME
S-ANNO-REDL
S-ANNO-REFR
S-ANNO-REVC
S-ANNO-REVS
S-ANNO-SCHD
S-ANNO-SYMB
S-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B9
Discipline: Architectural
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
A-ANNO-DIMS
A-ANNO-KEYN
A-ANNO-LEGN
A-ANNO-MATC
A-ANNO-NOTE
A-ANNO-NPLT
A-ANNO-PATT
A-ANNO-RDME
A-ANNO-REDL
A-ANNO-REFR
A-ANNO-REVC
A-ANNO-REVS
A-ANNO-SCHD
A-ANNO-SYMB
A-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B10
Discipline: Interiors
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
I-ANNO-DIMS
I-ANNO-KEYN
I-ANNO-LEGN
I-ANNO-MATC
I-ANNO-NOTE
I-ANNO-NPLT
I-ANNO-PATT
I-ANNO-RDME
I-ANNO-REDL
I-ANNO-REFR
I-ANNO-REVC
I-ANNO-REVS
I-ANNO-SCHD
I-ANNO-SYMB
I-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B11
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
F-ANNO-DIMS
F-ANNO-KEYN
F-ANNO-LEGN
F-ANNO-MATC
F-ANNO-NOTE
F-ANNO-NPLT
F-ANNO-PATT
F-ANNO-RDME
F-ANNO-REDL
F-ANNO-REFR
F-ANNO-REVC
F-ANNO-REVS
F-ANNO-SCHD
F-ANNO-SYMB
F-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B12
Discipline: Plumbing
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
P-ANNO-DIMS
P-ANNO-KEYN
P-ANNO-LEGN
P-ANNO-MATC
P-ANNO-NOTE
P-ANNO-NPLT
P-ANNO-PATT
P-ANNO-RDME
P-ANNO-REDL
P-ANNO-REFR
P-ANNO-REVC
P-ANNO-REVS
P-ANNO-SCHD
P-ANNO-SYMB
P-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B13
Discipline: Mechanical
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
M-ANNO-DIMS
M-ANNO-KEYN
M-ANNO-LEGN
M-ANNO-MATC
M-ANNO-NOTE
M-ANNO-NPLT
M-ANNO-PATT
M-ANNO-RDME
M-ANNO-REDL
M-ANNO-REFR
M-ANNO-REVC
M-ANNO-REVS
M-ANNO-SCHD
M-ANNO-SYMB
M-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B14
Discipline: Electrical
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
E-ANNO-DIMS
E-ANNO-KEYN
E-ANNO-LEGN
E-ANNO-MATC
E-ANNO-NOTE
E-ANNO-NPLT
E-ANNO-PATT
E-ANNO-RDME
E-ANNO-REDL
E-ANNO-REFR
E-ANNO-REVC
E-ANNO-REVS
E-ANNO-SCHD
E-ANNO-SYMB
E-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B15
Discipline: Telecommunications
MicroStation Color #
AutoCAD Color #
Level/Layer Description
AIA Format
General Information
T-ANNO-DIMS
T-ANNO-KEYN
T-ANNO-LEGN
T-ANNO-MATC
T-ANNO-NOTE
T-ANNO-NPLT
T-ANNO-PATT
T-ANNO-RDME
T-ANNO-REDL
T-ANNO-REFR
T-ANNO-REVC
T-ANNO-REVS
T-ANNO-SCHD
T-ANNO-SYMB
T-ANNO-TEXT
Graphic Defaults
Line Style
Level/Layer Naming
0
0
0
0
0
0
0
0
0
NA
0
0
0
V
0
V
V
V
0.70
0.35
0.18
0.18
0.18
0.25
NA
0.35
0.35
V
0.35
V
V
V
V
7
2
5
8
5
1
NA
4
4
V
6
V
V
V
V
0
4
1
9
1
3
NA
7
7
V
5
V
B16
Appendix C
Color Table Comparison
For more information on Screened Colors, see the section "Screening" in Chapter 3 "Graphic Concepts."
C1
Appendix C
Color Table Comparison
AutoCAD
Color No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
Appendix C Color Table Comparison
MicroStation
Color No.
3
4
2
7
1
5
0
9
14
10
19
27
35
43
51
59
67
75
83
6
30
22
46
38
62
54
78
70
94
86
110
102
126
118
142
134
158
150
174
166
190
182
206
198
222
214
Screened
Color
C3
Appendix C
Color Table Comparison
AutoCAD
Color No.
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
C4
MicroStation
Color No.
238
230
251
20
28
36
44
52
60
68
76
84
92
100
108
116
124
132
140
148
156
164
172
180
188
196
204
212
220
228
236
244
252
11
26
18
42
34
58
50
74
66
90
82
106
98
Screened
Color
Appendix C
Color Table Comparison
AutoCAD
Color No.
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
Appendix C Color Table Comparison
MicroStation
Color No.
122
114
138
130
154
146
170
162
186
178
202
194
218
210
234
226
250
242
246
247
16
32
48
64
80
96
112
12
15
23
31
39
47
55
63
71
79
87
95
103
111
119
127
135
143
151
Screened
Color
C5
Appendix C
Color Table Comparison
AutoCAD
Color No.
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
C6
MicroStation
Color No.
159
167
175
183
191
199
207
215
223
231
239
40
72
88
104
136
152
184
216
232
248
17
25
33
41
49
57
65
73
81
89
97
105
113
121
129
137
145
153
161
169
177
185
193
201
209
Screened
Color
Appendix C
Color Table Comparison
AutoCAD
Color No.
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
Appendix C Color Table Comparison
MicroStation
Color No.
217
225
233
241
249
245
128
144
160
176
192
208
224
240
254
13
29
21
45
37
61
53
77
69
93
85
109
101
125
117
141
133
157
149
173
165
189
181
205
197
221
213
237
229
253
91
Screened
Color
C7
Appendix C
Color Table Comparison
AutoCAD
Color No.
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
C8
MicroStation
Color No.
99
107
115
123
131
139
147
155
163
171
179
187
195
203
211
219
227
235
243
8
200
168
120
56
24
Screened
Color
Yes
Yes
Yes
Yes
Yes
Appendix D
A/E/C CAD Standard Symbology
Appendix D
A/E/C CAD Standard Symbology
This appendix provides the A/E/C CAD
Standard Symbology as follows:
Lines
16THLN Sixteenth Section Line ........ D1-3
ACIDWS Acid Waste......................... D1-3
AIRRLF Atmospheric Vent ............... D1-3
BANKLF Bank Left ........................... D1-3
BANKRT Bank Right ........................ D1-3
BARDIT Ditch Barrier ....................... D1-3
BARDTB Ditch and Berm Barrier ..... D1-3
BARGEN Generic Security Barrier ... D1-3
BARMAS Security Masonry Barrier . D1-3
BERM Berm ....................................... D1-4
BOILBD Boiler Blow Down .............. D1-4
BRINER Brine Return........................ D1-4
BRINES Brine Supply........................ D1-4
BUSWAY Busway ............................. D1-4
CABLTV Cable TV ........................... D1-4
CCTV Closed Circuit TV ................... D1-4
CDRNAF Condensate Drain .............. D1-4
CLDWTR Potable Cold Water ........... D1-4
CMP12 CMP 12 in. Diameter
Linear Pattern .................................. D1-5
CMP127 CMP 127 mm x 25 mm ....... D1-5
CMP152 CMP 152 mm x 51 mm ....... D1-5
CMP38 CMP 38 mm x 6 mm ............. D1-5
CMP51 CMP 51 mm x 13 mm ........... D1-5
CMP68 CMP 68 mm x 13 mm ........... D1-5
CMP76 CMP 76 mm x 25 mm ........... D1-5
CMPAIR Compressed Air .................. D1-5
CMPU12 CMP up to 12 in. Diameter
Linear Pattern .................................. D1-5
COMARN New Communication,
Aerial .............................................. D1-6
COMARX Existing Aerial
Communication Line ...................... D1-6
COMUGN New Communication
Underground.................................... D1-6
Appendix D A/E/C CAD Standard Symbology
Patterns
ADOBE Masonry/Adobe Rammed
Earth ................................................ D2-3
AGGLOM - Agglomerate or
Flow Breccia ................................... D2-3
ALUMIN Aluminum .......................... D2-3
ANDES Andesite ............................... D2-3
ASHLER Stone Ashler ....................... D2-3
BASALT Basalt ................................. D2-3
BRASS Bronze Brass ......................... D2-3
BRBLCO Coursed Brick Block. ........ D2-3
BRCOBD Common Bond Brick ........ D2-3
BRECCA Breccia ............................... D2-4
BRENBD English Bond Brick. .......... D2-4
BRFLBD Flemish Bond Brick. .......... D2-4
Appendix D A/E/C CAD Standard Symbology
General
Symbols
BREAK Break Line Symbol .............. D3-3
CNTLIN Centerline Symbol .............. D3-3
COLLIN Column Line/
Grid Indicator .................................. D3-3
DBLARR Double Arrow Terminator . D3-3
DTLIND Detail Indicator ................... D3-3
ELEV1 Elevation Indicator, Interior .. D3-3
ELEV2 Elevation Indicator, Interior .. D3-3
ELEV3 Elevation Indicator, Interior .. D3-3
ELEV4 Elevation Indicator, Interior .. D3-3
KEYIND Keynote Indicator ............... D3-4
MAGNOR Magnetic North Arrow .... D3-4
MATIND Match Line Indicator ......... D3-4
NORIND North Indicator ................... D3-4
NORNCS North Indicator (NCS) ....... D3-4
NORTH1 North Indicator................... D3-4
NORTH2 North Indicator................... D3-4
NORTH3 North Indicator................... D3-4
NOTIND Note Indicator..................... D3-4
REVID1 Revision Indicator, 1 Char .. D3-5
REVID2 Revision Indicator, 2 Char .. D3-5
S00001 Scale 1 : 1 .............................. D3-5
S00005 Scale 1 : 5 .............................. D3-5
S0000B Scale 1 = 1 ......................... D3-5
S00010 Scale 1 : 10 ............................ D3-5
S0001B Scale 1 = 1 ......................... D3-5
S0001G Scale 1 = 1 ......................... D3-5
S00020 Scale 1 : 20 ............................ D3-5
S0003B Scale 3 = 1 ......................... D3-6
Appendix D A/E/C CAD Standard Symbology
Hazardous Materials
Symbols
AIRQST Air Quality Monitoring
Station ............................................. D4-3
AIRSMP Air Sample Location ........... D4-3
vii
Survey/Mapping
Symbols
ACLLEL Elevated Approach
Lightbar ........................................... D5-3
ACLLSF Semiflush Approach
Lightbar ........................................... D5-3
AERO Seaplane Anchorage Buoy...... D5-3
AFBCN Airfield Beacon .................... D5-3
AIRFLD Airfield Symbol................... D5-3
ANCHR1 Anchorage Large Vessel .... D5-3
viii
Geotechnical
Symbols
ANCHOL Angle Cored Hole
(Arrow=Dir) .................................... D6-3
ANTICL Anticline ............................. D6-3
BHHNUM Backhoe Hole Number..... D6-3
BOLOGR Boring Log Refusal ........... D6-3
BORLOG Boring Log Sheet .............. D6-3
Appendix D A/E/C CAD Standard Symbology
Civil
Symbols
AIRFLD Airfield Symbol................... D7-3
ARRPT Parking Turn Arrow.............. D7-3
ARRSD Straight Direction Arrow...... D7-3
ARRST Straight and Turn Arrow....... D7-3
BREAK Break Line Symbol .............. D7-3
BUOY Buoy ....................................... D7-3
CATBSN Catch Basin ........................ D7-3
xiii
Landscape
Symbols
SHRUBC Shrub, Coniferous .............. D8-3
SHRUBD Shrub, Deciduous .............. D8-3
TREEC Tree, Coniferous ................... D8-3
Appendix D A/E/C CAD Standard Symbology
Structural
Objects
4FRB 4" Flat Ribbed Waterstop ......... D9-3
6FRBHD 6" Flat Ribbed Waterstop,
Heavy Duty ..................................... D9-3
6FRBLW 6" Flat Ribbed Waterstop,
Light Weight ................................... D9-3
6RCBHD 6"Ribbed Waterstop with
Center Bulb, Heavy Duty ................ D9-3
6RCBLW 6" Ribbed Waterstop with
Center Bulb, Light Weight.............. D9-3
9FLBHD 9" Flat Ribbed Waterstop
Heavy Duty ..................................... D9-3
9FRBLW 9" Flat Ribbed Waterstop
Light Weight ................................... D9-3
9RCBHD 9" Ribbed Waterstop with
Center Bulb, Heavy Duty ................ D9-3
9RCBLW 9" Ribbed Waterstop with
Center Bulb, Light Weight.............. D9-3
AZLBF Foster Connection AZ LBF .. D9-4
AZLBM Foster Conn. AZ LBM ........ D9-4
BOX Box Pile ..................................... D9-4
CMUFL Fluted Concrete Block,
8 X 8 X 16 ....................................... D9-4
CMURIB Ribbed Concrete Block,
8 X 8 X 16 ....................................... D9-4
CMUSF Split Face Concrete Block,
8 X 8 X 16 ....................................... D9-4
CMUSTR Structural Concrete Block,
8 X 8 X 16 ....................................... D9-4
PLZ23 PLZ23 Sheet Piling ................ D9-4
PLZ25 PLZ25 Sheet Piling ................ D9-4
PS27.5 PS27.5 Sheet Pile ................... D9-5
PS31 PS31 Sheet Pile ......................... D9-5
PSA23 PSA23 Sheet Pile ................... D9-5
PZ22 PZ22 Sheet Pile......................... D9-5
PZ27 PZ27 Sheet Pile......................... D9-5
PZ35 PZ35 Sheet Pile......................... D9-5
PZ40 PZ40 Sheet Pile......................... D9-5
PZBBSM Foster Conn. HPile............. D9-5
PZBULL Foster Conn. Bullhead ........ D9-5
PZCBM Foster Conn. CBM ............... D9-6
PZJOKR Foster Conn. Joker .............. D9-6
Appendix D A/E/C CAD Standard Symbology
xv
Architectural
Objects
BRKGL Glazed Brick ...................... D10-3
CMU Masonry Unit.......................... D10-3
CMUBLK Concrete Block, 8X8X16D10-3
CMUCOR Concrete Block,
8X8X16 Corner............................. D10-3
CMUEND Concrete Block,
8X8X16 End ................................. D10-3
CMUGL Glazed Concrete Block ..... D10-3
CMUSTR Concrete Block,
8X8X16 Str. .................................. D10-3
DOR18L Left Door, 180 Degree
Swing ............................................ D10-3
DOR18R Right Door, 180 Degree
Swing ............................................ D10-3
DORBFL Left Bifold Door .............. D10-4
DORBFR Right Bifold Door ............ D10-4
DORCPV Door Center Pivot............ D10-4
DORCYL Dark Room Door ............. D10-4
DORDBL Left Double Door ............ D10-4
DORDBR Right Double Door.......... D10-4
DORDEL Left Double Egress Door. D10-4
DORDER Right Double Egress DoorD10-4
DORFSL Left Single Full
Swing Door ................................... D10-4
DORFSR Right Single Full
Swing Door ................................... D10-5
DOROVH Overhead Door ............... D10-5
DORPOC Door Pocket ..................... D10-5
DORREV Revolving Door ............... D10-5
DORRUP Roll Up Door ................... D10-5
DORSHL Left Single Hinged Door. D10-5
DORSHR Right Single Hinged DoorD10-5
DORSLD Sliding Door .................... D10-5
DORSLS Sliding Surface Door ........ D10-5
DORSPL Left Single Pivot Door ..... D10-6
DORSPR Right Single Pivot Door ... D10-6
DORUDL Left Uneven Double DoorD10-6
DORUDR Right Uneven Dbl. Door . D10-6
LINTEL Concrete Beam Bond
Lintel ............................................. D10-6
WINAWN Window Awning ............ D10-6
WINBAY Projected Bay Window ... D10-6
WINBOW Projected Bow Window . D10-6
WINBOX Projected Box Window ... D10-6
xvi
Interiors
Objects
ABLLBD Bulletin Board ................. D11-3
ACOSTM Costumer ......................... D11-3
ADDCAB Double Door Cabinet ...... D11-3
AEAS30 Easel, 30W (Hidden) ......... D11-3
AMAG15 Magazine Rack,
15W X 3D ..................................... D11-3
AMAGLT Magnifying Light ........... D11-3
APRJSC Projection Screen,
Ceiling-Mounted ........................... D11-3
ASTCAB Storage Cabinet ................ D11-3
D65CLR Desk 65 Comp LR ............ D11-3
D65CRR Desk 65 Comp RR ............ D11-4
xviii
Fire Protection
Symbols
1DIR Direction Arrow...................... D12-3
ABORT Abort Switch ...................... D12-3
ACCESS Fire Department Access ... D12-3
AGSTCN Agent Storage Container . D12-3
BELLFA Fire Alarm Bell ................. D12-3
BFPDCK Backflow Preventer
Double Check ............................... D12-3
BFPRPZ Backflow Preventer RPZ .. D12-3
BOILER Boiler................................. D12-3
CHIMNY Chimney .......................... D12-3
CO2AA CO2 Automatically Actuated
Extinguishing System ................... D12-4
CO2MA CO2 Manually Actuated
Extinguishing System ................... D12-4
CONSFS Freestanding Siamese Fire
Department Connection ................ D12-4
CONSIA Siamese Fire Department
Connection .................................... D12-4
CONSNG Single Fire Department
Connection .................................... D11-4
CPESR Elevator Status/Recall ......... D12-4
Appendix D A/E/C CAD Standard Symbology
Plumbing
Symbols
CAPSC Cap ...................................... D13-3
DRNFUN Open Drain Funnel .......... D13-3
EL45SC 45 Degree Elbow ............... D13-3
EL90SC 90 Degree Elbow ............... D13-3
ELBSC Base Elbow ......................... D13-3
ELDBSC Double Branch Elbow ...... D13-3
ELLRSC Long Radius Elbow .......... D13-3
ELODSC Side Outlet Elbow,
Outlet Down .................................. D13-3
ELOUSC Side Outlet Elbow,
Outlet Up....................................... D13-3
ELSTRT Street Elbow...................... D13-4
ELTDSC Turned Down Elbow ........ D13-4
ELTUSC Turned Up Elbow ............. D13-4
FCO Floor Cleanout ......................... D13-4
FDCO Floor Drain with Cleanout .... D13-4
FDDT Floor Drain with Deep Trap .. D13-4
FDNT Floor Drain with No Trap ..... D13-4
FDTP Floor Drain with Trap Prime . D13-4
FDWT Floor Drain with Trap .......... D13-4
FLBLND Blind Flange ..................... D13-5
FLOW3 Flow Arrow ........................ D13-5
FLRPEN Iso. Floor Penetration ....... D13-5
Appendix D A/E/C CAD Standard Symbology
xxii
Mechanical
Symbols
ACCDOR Duct Access Door ........... D14-3
AGUIDE Alignment Guide .............. D14-3
AIRELM Air Eliminator .................. D14-3
AIRIN Air In .................................... D14-3
AIRSEP Air Separator...................... D14-3
ANCHRI Anchor .............................. D14-3
AVENTA Automatic Air Vent ......... D14-3
AVENTM Manual Air Vent ............. D14-3
BALLJT Ball Joint ........................... D14-3
BUSHSC Bushing ............................ D14-4
CAPSC Cap ...................................... D14-4
CAPTUB Capillary Tube ................. D14-4
CDRND Round Ceiling Diffuser ..... D14-4
CDSQR Square Ceiling Diffuser...... D14-4
CFM2X3 Airflow CFM.................... D14-4
CFM2X4 Airflow CFM.................... D14-4
CFM3X4 Airflow CFM.................... D14-4
COCKSC Cock................................. D14-4
CREDSC Concentric Reducer .......... D14-5
CRSRSC Cross ................................. D14-5
CUPJNT Coupling Joint ................... D14-5
DCTHTR Electric Duct Heater ........ D14-5
DMPEOC Electric Operated
Damper Control ............................ D14-5
DMPFIR Fire Damper ...................... D14-5
DMPFS Fire Smoke Damper............ D14-5
DMPPOD Pneumatic Damper .......... D14-5
DMPSMK Smoke Damper ............... D14-5
DPRSD Duct Pressure Class Down.. D14-6
DPRSH Duct Pressure Class Horiz .. D14-6
DPRSL Duct Pressure Class Left ..... D14-6
DPRSR Duct Pressure Class Right... D14-6
DPRSU Duct Pressure Class Up ...... D14-6
DPRSV Duct Pressure Class Vert .... D14-6
DRIER Drier..................................... D14-6
EEQ2X2 Electrical Equipment
2X2 Mark ...................................... D14-6
EEQ2X3 Electrical Equipment
2X3 Mark ...................................... D14-6
EEQ2X4 Electrical Equipment
2X4 Mark ...................................... D14-7
EEQ3X2 Electrical Equipment
3X2 Mark ...................................... D14-7
Electrical
Symbols
1DIR Direction Arrow...................... D15-3
xxiv
Telecommunications
Symbols
GRDROD Grounding Rod ............... D16-3
RECDC Data Communication Wall
Receptacle ..................................... D16-3
RECDCF Data Communication Floor
Receptacle ..................................... D16-3
RECTDF Telephone/Data Floor
Receptacle ..................................... D16-3
xxvii
xxviii
1 Lines Library
D1-1
2 Patterns Library
D2-1
D3-1
D4-1
D5-1
D6-1
D7-1
D8-1
D9-1
D9-11
D10-1
D10-9
D11-1
D11-9
D12-1
D13-1
D14-1
D15-1
D16-1
Form Approved
OMB No. 0704-0188
Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining
the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for
reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington,
VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not
display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
2. REPORT TYPE
Final
September 2012
4. TITLE AND SUBTITLE
ERDC/ITL TR-12-X
The A/E/C CAD Standard has been developed by the CAD/BIM Technology Center (Center) for Facilities, Infrastructure, and
Environment to eliminate redundant Computer-Aided Design (CAD) standardization efforts within the Department of Defense (DoD)
and the Federal Government. The manual is part of an initiative to develop a nonproprietary CAD standard that incorporates existing
industry, national, and international standards and to develop data standards that address the entire life cycle of facilities within the
DoD.
The CAD drafting standards addressed in the A/E/C CAD standard include presentation graphics, level/layer assignments, electronic file
naming, and standard symbology. The Center's primary goal is to develop a CAD standard that is generic enough to operate under
various CAD software packages (such as Bentley's MicroStation and Autodesk's AutoCAD) and incorporate existing industry standards
when possible.
CAD standards
A/EC
CAD
16. SECURITY CLASSIFICATION OF:
a. REPORT
UNCLASSIFIED
b. ABSTRACT
UNCLASSIFIED
17. LIMITATION
OF ABSTRACT
18. NUMBER
OF PAGES
c. THIS PAGE
UNCLASSIFIED
446
area code)